aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* base-files: create /etc/config/ directoryHauke Mehrtens2017-09-301-0/+1
| | | | | | | | | | | | | | | The /bin/config_generate script and some other scripts are assuming the /etc/config directory exists in the image. This is true in case for example the package firewall, dropbear or dnsmasq are included, which are adding the files under /etc/config/. Without any of these package the system will not boot up fully because the /etc/config/ directory is missing and some init scripts just fail. Make sure all images with the base-files contain a /etc/config/ directory. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: John Crispin <john@phrozen.org>
* ltq-vdsl-mei: revert disable optimized firmware downloadMathias Kresin2017-09-301-2/+2
| | | | | | | | | | | | This reverts commit b428f45c062dc8ca8c2f35f491fa467dc5b85519. If the optimized firmware download is disabled, the xdsl subsystem hangs in the "idle request" state after physically disconnecting and reconnecting the xdsl modem from the line. It might fix the failing line init on boot as well. Signed-off-by: Mathias Kresin <dev@kresin.me>
* iw: fix build on musl hostStijn Tintel2017-09-291-2/+1
| | | | | | | | | | | The empty version.sh script causes a problem when run by make: make[3]: /usr/bin/env bash: Shell program not found Adding a shebang line in version.sh seems to solve it. Fixes FS#977. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* util-linux: avoid using the getrandom syscallFelix Fietkau2017-09-291-0/+14
| | | | | | | | | | | getrandom blocks until the random pool is being initialized. Unfortunately, this code is being called early during init to create the overlay filesystem, on some devices leaving little chance for a successful random pool init. True randomness is not that important here, so fix this issue by sticking to using /dev/urandom, like in older versions of this code. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* gdb: bump to 8.0.1Stijn Tintel2017-09-293-14/+13
| | | | | | | | | | Add -static-libstdc++ to TARGET_LDFLAGS to avoid a hard dependency on libstdc++, and -Wl,--gc-sections to further reduce the size on platforms that support it. Fixes CVE-2017-9778. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* mt76: update to the latest version, improves mt7603 stabilityFelix Fietkau2017-09-281-3/+3
| | | | | | | | cb83f33 mt7603: mac: fix logic in mt7603_tx_hang() 21f20b4 mt7603: mac: fix register configuration in mt7603_rx_dma_busy() d5e945e mt7603: mcu: fix indentation of mcu command definition Signed-off-by: Felix Fietkau <nbd@nbd.name>
* linux-firmware: fix intel wireless-n 100 firmware package nameFelix Fietkau2017-09-281-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add support for accessing 802.11k neighbor report elements via ubusFelix Fietkau2017-09-281-0/+169
| | | | | | | This API can be used to distribute neighbor report entries across multiple APs on the same LAN. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add support for specifying device config options directly in uciFelix Fietkau2017-09-281-0/+6
| | | | | | | This is useful for tuning some more exotic parameters where it doesn't make sense to attempt to cover everything in uci directly Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dropbear: make ssh compression support configurableMarcin Jurkowski2017-09-282-3/+13
| | | | | | | | | Adds config option to enable compression support which is usefull when using a terminal sessions over a slow link. Impact on binary size is negligible but additional 60 kB (uncompressed) is needed for a shared zlib library. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
* umdns: update to latest git HEADJohn Crispin2017-09-281-3/+3
| | | | | | | | b84fdac Add debug output for service_timeout 8f7e3bc Remove incorrect comma in http service json config 9f40133 Remove ttl==255 restriction for queries Signed-off-by: John Crispin <john@phrozen.org>
* procd: Install seccomp-trace symlinkMichal Sojka2017-09-281-0/+1
| | | | Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
* procd: update to latest git HEADJohn Crispin2017-09-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | ee582d1 instance: properly compare and reload respawn config 260a4cd utrace: Start the tracee only after uloop initialization 520ad3c utrace: Switch all logging to ulog 1c48104 utrace: Support non-contiguous syscall numbers 582cf97 utrace: Forward SIGTERM to the traced process 32534f7 utrace: Report ptrace errors ccde3fb seccomp: Improve error message 7f9b174 preload-seccomp: Use proper log level for error messages e3c4302 Start seccomp-enabled services via seccomp-trace 5e4ad02 seccomp: Log seccomp violations with utrace 2661b2f utrace: Use PTHREAD_SEIZE instead of PTHREAD_TRACEME b5d53c6 utrace: Deliver signals to traced processes b416ed9 utrace: Support tracing multi-threaded processes and vfork 8b7d47a utrace: Trace processes across forks c6b6ec6 utrace: Sort syscalls by number of invocations 592c532 Update trace attribute c8faedc Do not disable seccomp when configuration is not found 017f3a1 utrace: Fix off-by-one errors 5acaf15 utrace: Fix environment initialization Signed-off-by: John Crispin <john@phrozen.org>
* ramips: improve Xiaomi Mi Router 3G supportKevin Darbyshire-Bryant2017-09-281-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit improves support for the Xiaomi Mi Router 3G originally added in commit 6e283cdc0da25928f8148805ebef7f8f2b769ee8 Improvements: - Remove software watchdog as hardware watchdog now working as per commit 3fbf3ab44f5cebb22e30a4c8681b13341feed6a6 for all mt7621 devices. - Reset button polarity corrected - length of press determines reboot (short press) vs. reset to defaults (long press) behaviour. - Enable GPIO amber switch port LEDs on board rear - lit indicates 1Gbit link and blink on activity. Green LEDs driven directly by switch indicating any link speed and tx activity. - USB port power on/off GPIO exposed as 'usbpower' - Add access to uboot environment settings for checking/setting uboot boot order preference from user space. Changes: - Front LED indicator is physically made of independent Yellow/Amber, Red & Blue LEDs combined via a plastic 'lightpipe' to a front panel indicator, hence the colour behaviour is similar to an RGB LED. RGB LEDs are not supported at this time because they produce colour results that do not then match colour labels, e.g. enabling 'mir3g:red' and 'mir3g:blue' would result in a purple indicator and we have no such label for purple. The yellow, red & blue LEDs have been split out as individual yellow, red & blue status LEDs, with yellow being the default status LED as before and with red's WAN and blue's USB default associations removed. - Swapped order of vlan interfaces (eth0.1 & eth0.2) to match stock vlan layout. eth0.1 is LAN, eth0.2 is WAN - Add 'lwlll' vlan layout to mt7530 switch driver to prevent packet leakage between kernel switch init and uci swconfig uboot behaviour & system 'recovery' uboot expects to find bootable kernels at nand addresses 0x200000 & 0x600000 known by uboot as "system 1" and "system 2" respectively. uboot chooses which system to hand control to based on 3 environment variables: flag_last_success, flag_try_sys1_failed & flag_try_sys2_failed last_success represents a preference for a particular system and is set to 0 for system 1, set to 1 for system 2. last_success is considered *if* and only if both try_sys'n'_failed flags are 0 (ie. unset) If *either* failed flags are set then uboot will attempt to hand control to the non failed system. If both failed flags are set then uboot will check the uImage CRC of system 1 and hand control to it if ok. If the uImage CRC of system is not ok, uboot will hand control to system 2 irrespective of system 2's uImage CRC. NOTE: uboot only ever sets failed flags, it *never* clears them. uboot sets a system's failed flag if that system's was selected for boot but the uImage CRC is incorrect. Fortunately with serial console access, uboot provides the ability to boot an initramfs image transferred via tftp, similarly an image may be flashed to nand however it will flash to *both* kernels so a backup of stock kernel image is suggested. Note that the suggested install procedure below set's system 1's failed flag (stock) thus uboot ignores the last_success preference and boots LEDE located in system 2. Considerable thought has gone into whether LEDE should replace both kernels, only one (and which one) etc. LEDE kernels do not include a minimal rootfs and thus unlike the stock kernel cannot include a method of controlling uboot environment variables in the event of rootfs mount failure. Similarly uboot fails to provide an external mechanism for indicating boot system failure. Installation - from stock. Installation through telnet/ssh: - copy lede-ramips-mt7621-mir3g-squashfs-kernel1.bin and lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin to usb disk or wget it from LEDE download site to /tmp - switch to /extdisks/sda1/ (if copied to USB drive) or to /tmp if wgetted from LEDE download site - run: mtd write lede-ramips-mt7621-mir3g-squashfs-kernel1.bin kernel1 - run: mtd write lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin rootfs0 - run: nvram set flag_try_sys1_failed=1 - run: nvram commit - run: reboot Recovery - to stock. Assuming you used the above installation instructions you will have a stock kernel image in system 1. If it can be booted then it may be used to perform a stock firmware recovery, thus erasing LEDE completely. From a 'working' LEDE state (even failsafe) Failsafe only: - run: mount_root - run: sh /etc/uci-defaults/30_uboot-envtools Then do the steps for 'All' All: - run: fw_setenv flag_try_sys2_failed 1 - run: reboot The board will reboot into system 1 (stock basic kernel) and wait with system red light slowly blinking for a FAT formatted usb stick with a recovery image to be inserted. Press and hold the reset button for around 1 second. Status LED will turn yellow during recovery and blue when recovery complete. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ltq-vdsl-mei: disable optimized firmware downloadMathias Kresin2017-09-281-2/+2
| | | | | | | | | With ltq-vdsl-mei 1.5.17.6 an optimized firmware download was added and enabled by default. As soon as the optimized firmware download is enabled, a watchdog based reboot is trigger between 24h to 48h of uptime if the board isn't connected to a xdsl line. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ltq-vdsl: fix PM thread suspend and resume handlingMartin Schiller2017-09-282-1/+108
| | | | | | | | This is a backport form drv_dsl_cpe_api-4.18.10 and fixes some PM thread handling issues which lead to high system load and watchdog trigger within 1h of uptime for boards not connected to a xdsl line. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* openvpn: update to 2.4.4Magnus Kroken2017-09-282-34/+58
| | | | | | | | | Fixes CVE-2017-12166: out of bounds write in key-method 1. Remove the mirror that was temporarily added during the 2.4.3 release. Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* hostapd: update wpa_supplicant p2p configLorenzo Santina2017-09-281-91/+278
| | | | | | | | | | | | | | | | Update the config file to the latest version. Added CONFIG_EAP_FAST=y because it was the only missing flag about EAP compared to full config. Removed NEED_80211_COMMON flag because it is not part of config file, it is set by the hostapd upstream Makefile. Other flags are the same as before. Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> [add punctuation to commit msg] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* hostapd: update wpa_supplicant mini configLorenzo Santina2017-09-281-100/+292
| | | | | | | | | | | | Update the config file to the latest version. Enabled flags are the same as before. Removed NEED_80211_COMMON flag because it is not part of config file, it is set by the hostapd upstream Makefile. Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> [add punctuation to commit msg] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* hostapd: update wpa_supplicant full configLorenzo Santina2017-09-281-93/+280
| | | | | | | | | | | | | | | Update the config file to the latest version. Enabled flags are the same as before. Commented CONFIG_IEEE80211W=y flag because it is set in the Makefile, only if the driver supports it. Removed NEED_80211_COMMON flag because it is not part of config file, it is set by the hostapd upstream Makefile. Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> [add punctuation to commit msg] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* hostapd: update hostapd mini configLorenzo Santina2017-09-281-19/+237
| | | | | | | | | Update the config file to the latest version. Enabled flags are the same as before. Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> [add punctuation to commit msg] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* hostapd: update hostapd full configLorenzo Santina2017-09-281-27/+235
| | | | | | | | | | | | | | Update the config file to the latest version. Enabled flags are the same as before. Removed flag CONFIG_WPS2 because it is no more needed due to this changelog (2014-06-04 - v2.2): "remove WPS 1.0 only support, i.e., WSC 2.0 support is now enabled whenever CONFIG_WPS=y is set". Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> [add punctuation to commit msg] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* curl: fix disable threaded resolverHans Dedecker2017-09-271-0/+36
| | | | | | | | | | | Bump to 7.55.1 broke the disable threaded resolver feature as reported in https://github.com/curl/curl/issues/1784. As a result curl is always compiled with the threaded resolver feature enabled which causes a dependency issue on pthread for uclibc. Fix this issue by backporting the upstream curl commit which fixes disable threaded resolver. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ipset: replace patch that was reverted upstreamStijn Tintel2017-09-262-31/+25
| | | | | | Use the correct prefix for backports while at it. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* uboot-mvebu: add OpenSSL compat patchesMarko Ratkaj2017-09-252-0/+249
| | | | | | | | | | | | | | Fixes the following build issue: "undefined reference to `EVP_MD_CTX_create'" From: Jelle van der Waa <jelle@vdwaa.nl> The rsa_st struct has been made opaque in 1.1.x, add forward compatible code to access the n, e, d members of rsa_struct. EVP_MD_CTX_cleanup has been removed in 1.1.x and EVP_MD_CTX_reset should be called to reinitialise an already created structure. Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
* uboot-mvebu: fix SETEXPR redefinition warningMarko Ratkaj2017-09-251-12/+8
| | | | Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
* uboot-mvebu: add missing UBOOT_MAKE_FLAGS variableMarko Ratkaj2017-09-251-0/+2
| | | | | | This patch removes "/bin/sh: HOSTCPPFLAGS: command not found" errors douring build. Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
* samba36: add Package/samba/DefaultStijn Tintel2017-09-251-12/+12
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ipset: bump to 6.34Stijn Tintel2017-09-252-3/+34
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* curl: bump to 7.55.1Stijn Tintel2017-09-253-11/+11
| | | | | | | | | | | | Update 200-no_docs_tests.patch. Refresh patches. Fixes the following CVEs: - CVE-2017-1000099 - CVE-2017-1000100 - CVE-2017-1000101 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* iperf: bump to 2.0.10Stijn Tintel2017-09-251-9/+4
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* sunxi: add Olimex A20-OLinuXino-LIME2-eMMCLucian Cristian2017-09-243-0/+113
| | | | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com> [replaced u-boot patch with original version from u-boot git] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-usb-storage-uasJames Christopher Adduono2017-09-221-0/+19
| | | | | | | | | This will allow you to build and package the uas.ko module. With more routers supporting USB 3.0 host this could help speed up activities like DLNA and Samba, as well as reduce CPU utilization over BOT mass storage drivers. Signed-off-by: James Christopher Adduono <jc@adduono.com>
* uhttp: update to latest versionAdrian Panella2017-09-211-4/+4
| | | | | | | | | | | | | | 3fd58e9 2017-08-19 uhttpd: add manifest support 88c0b4b 2017-07-09 file: fix basic auth regression 99957f6 2017-07-02 file: remove unused "auth" member from struct path_info c0a569d 2017-07-02 proc: expose HTTP_AUTH_USER and HTTP_AUTH_PASS ad93be7 2017-07-02 auth: store parsed username and password fa51d7f 2017-07-02 proc: do not declare empty process variables a8bf9c0 2017-01-26 uhttpd: Add TCP_FASTOPEN support e6cfc91 2016-10-25 lua: ensure that PATH_INFO starts with a slash Signed-off-by: Adrian Panella <ianchi74@outlook.com>
* libubox: fix uloop race conditionHans Dedecker2017-09-211-3/+3
| | | | | | 7a10576 uloop: Fix race condition in SIGCHLD handling Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* arm-trusted-firmware-sunxi: depend on sunxi targetStijn Tintel2017-09-201-0/+1
| | | | | | | | | The arm-trusted-firmware-sunxi package is only used by the Allwinner A64, so only make it selectable for its subtarget sunxi/cortexa53. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Jonas Gorski <jonas.gorski@gmail.com>
* at91bootstrap: New package at91bootstrapSandeep Sheriker Mallikarjun2017-09-202-0/+173
| | | | | | | | | at91bootstrap is a second-level bootloader for Microchip(Atmel AT91) SoCs. It provides a set of algorithms to manage the hardware initialization and to download the main application or a third-level bootloader(i.e. uboot) from specified boot media to main memory and execute it. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* uboot-at91: Add support for SAMA5D4 Xplained boardSandeep Sheriker Mallikarjun2017-09-201-2/+22
| | | | | | | Add support for SAMA5D4 Xplained board and options to select & build u-boot configs for different media storage. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* uboot-at91: Add support for SAMA5D2 Xplained boardSandeep Sheriker Mallikarjun2017-09-201-1/+16
| | | | | | | Add support for SAMA5D2 Xplained board and options to select & build u-boot configs for different media storage. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* uboot-at91: Add support for SAMA5D3 Xplained boardSandeep Sheriker Mallikarjun2017-09-201-1/+15
| | | | | | | Add support for SAMA5D3 Xplained board and options to select & build u-boot configs for different media storage. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* uboot-at91: move BUILD_SUBTARGET from U-Boot/Default to devicesSandeep Sheriker Mallikarjun2017-09-201-1/+2
| | | | | | | | currenlty U-Boot/Default supports only at91 legacy devices.To add sama5 support, moving BUILD_SUBTARGET from U-Boot/Default to target devices. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* ipq-wifi: fix missing define of PKG_NAMEChen Minqiang2017-09-201-0/+1
| | | | Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* usbutils: avoid duplicating the git revisionPhilip Prindeville2017-09-201-1/+1
| | | | Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* openvpn: add "extra-certs" optionSven Roederer2017-09-192-1/+2
| | | | | | | | This option is used to specify a file containing PEM certs, to complete the local certificate chain. Which is quite usefull for "split-CA" setups. Signed-off-by: Sven Roederer <devel-sven@geroedel.de> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* sunxi: add Olimex A20-OlinuXino-LIME2Lucian Cristian2017-09-181-0/+7
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* hostapd: ft_over_ds supportLorenzo Santina2017-09-181-2/+4
| | | | | | Add support for ft_over_ds flag in ieee80211r Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
* hostapd: ft_psk_generate_local supportLorenzo Santina2017-09-181-2/+4
| | | | | | | | Add support for ft_psk_generate_local flag in ieee80211r Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> [original author] Signed-off-by: Sergio <mailbox@sergio.spb.ru>
* ath10k-firmware: use firmware from git instead of extra downloadHauke Mehrtens2017-09-181-28/+3
| | | | | | | | Instead of manually downloading the files again we can also take the same files directly from the ath10k-firmware git which was cloned before. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: build A64 SoC and pine64 U-BootHauke Mehrtens2017-09-182-1/+22
| | | | | | This creates a U-Boot for the aarch64 SoC A64 on the pine64 board. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* arm-trusted-firmware-sunxi: add new packageHauke Mehrtens2017-09-181-0/+51
| | | | | | This is needed for the Boot loader of the A64 SoC. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-31 07:48:49 +0000