| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
| |
Use PKGARCH:=all to declare this package to be free of any
architecture dependent code.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
|
|
|
|
|
|
|
| |
By installing policycoreutils to host/bin it is also available within
the ImageBuilder and SDK, allowing to correctly label both filesystems
and packages.
Signed-off-by: Paul Spooren <mail@aparcar.org>
|
|
|
|
|
|
|
|
|
|
| |
The firmware for Wave1 chips was updated to the latest release
10.2.4-1.0-00047 at the end of 2019 (commit 513d70cc50b).
Package firmware for these chips from linux-firmware.
This avoids downloading the ath10k-firmware repository.
Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
|
|
|
|
| |
This is a bug-fix release. Patches were refreshed.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
|
|
|
|
| |
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
|
|
|
|
| |
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
|
|
|
|
| |
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
|
|
|
|
| |
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
|
|
|
|
| |
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
|
|
|
|
| |
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
|
|
|
|
| |
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
|
|
|
|
|
|
|
|
| |
'setfiles' and others should be installed to $(STAGING_DIR_HOSTPKG)/bin
rather than $(...)/sbin which isn't in PATH.
Also using -Wl,-rpath to set library search location instead of setting
LD_LIBRARY_PATH when calling setfiles in image.mk.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
|
|
|
|
|
|
|
|
|
| |
As the PWM has its own sub-system in the Linux kernel,
I think it should be handled in the same way as GPIO, RTC, PCI...
This patch introduces a specific feature flag "pwm" and the
"leds-pwm" kernel module as the first customer.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The Linksys MR8300 is based on QCA4019 and QCA9888
and provides three, independent radios.
NAND provides two, alternate kernel/firmware images
with fail-over provided by the OEM U-Boot.
Hardware Highlights:
SoC: IPQ4019 at 717 MHz (4 CPUs)
RAM: 512MB RAM
SoC: Qualcomm IPQ4019 at 717 MHz (4 CPUs)
RAM: 512M DDR3
FLASH: 256 MB NAND (Winbond W29N02GV, 8-bit parallel)
ETH: Qualcomm QCA8075 (4x GigE LAN, 1x GigE Internet Ethernet Jacks)
BTN: Reset and WPS
USB: USB3.0, single port on rear with LED
SERIAL: Serial pads internal (unpopulated)
LED: Four status lights on top + USB LED
WIFI1: 2x2:2 QCA4019 2.4 GHz radio on ch. 1-14
WIFI2: 2x2:2 QCA4019 5 GHz radio on ch. 36-64
WIFI3: 2x2:2 QCA9888 5 GHz radio on ch. 100-165
Support is based on the already supported EA8300.
Key differences:
EA8300 has 256MB RAM where MR8300 has 512MB RAM.
MR8300 has a revised top panel LED setup.
Installation:
"Factory" images may be installed directly through the OEM GUI using
URL: https://ip-of-router/fwupdate.html (Typically 192.168.1.1)
Signed-off-by: Hans Geiblinger <cybrnook2002@yahoo.com>
[copied Hardware-highlights from EA8300. Fixed alphabetical order.
fixed commit subject, removed bogus unit-address of keys,
fixed author (used Signed-off-By to From:) ]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Luma Home WRTQ-329ACN, also known as Luma WiFi System, is a dual-band
wireless access point.
Specification
SoC: Qualcomm Atheros IPQ4018
RAM: 256 MB DDR3
Flash: 2 MB SPI NOR
128 MB SPI NAND
WIFI: 2.4 GHz 2T2R integrated
5 GHz 2T2R integrated
Ethernet: 2x 10/100/1000 Mbps QCA8075
USB: 1x 2.0
Bluetooth: 1x 4.0 CSR8510 A10, connected to USB bus
LEDS: 16x multicolor LEDs ring, controlled by MSP430G2403 MCU
Buttons: 1x GPIO controlled
EEPROM: 16 Kbit, compatible with AT24C16
UART: row of 4 holes marked on PCB as J19, starting count from the side
of J19 marking on PCB
1. GND, 2. RX, 3. TX, 4. 3.3V
baud: 115200, parity: none, flow control: none
The device supports OTA or USB flash drive updates, unfotunately they
are signed. Until the signing key is known, the UART access is mandatory
for installation. The difficult part is disassembling the casing, there
are a lot of latches holding it together.
Teardown
Prepare three thin, but sturdy, prying tools. Place the device with back
of it facing upwards. Start with the wall having a small notch. Insert
first tool, until You'll feel resistance and keep it there. Repeat the
procedure for neighbouring walls. With applying a pressure, one edge of
the back cover should pop up. Now carefully slide one of the tools to
free the rest of the latches.
There's no need to solder pins to the UART holes, You can use hook clips,
but wiring them outside the casing, will ease debuging and recovery if
problems occur.
Installation
1. Prepare TFTP server with OpenWrt initramfs image.
2. Connect to UART port (don't connect the voltage pin).
3. Connect to LAN port.
4. Power on the device, carefully observe the console output and when
asked quickly enter the failsafe mode.
5. Invoke 'mount_root'.
6. After the overlayfs is mounted run:
fw_setenv bootdelay 3
This will allow to access U-Boot shell.
7. Reboot the device and when prompted to stop autoboot, hit any key.
8. Adjust "ipaddr" and "serverip" addresses in U-Boot environment, use
'setenv' to do that, then run following commands:
tftpboot 0x84000000 <openwrt_initramfs_image_name>
bootm 0x84000000
and wait till OpenWrt boots.
9. In OpenWrt command line run following commands:
fw_setenv openwrt "setenv mtdids nand1=spi_nand; setenv mtdparts mtdparts=spi_nand:-(ubi); ubi part ubi; ubi read 0x84000000 kernel; bootm 0x84000000"
fw_setenv bootcmd "run openwrt"
10. Transfer OpenWrt sysupgrade image to /tmp directory and flash it
with:
ubirmvol /dev/ubi0 -N ubi_rootfs
sysupgrade -v -n /tmp/<openwrt_sysupgrade_image_name>
11. After flashing, the access point will reboot to OpenWrt, then it's
ready for configuration.
Reverting to OEM firmware
1. Execute installation guide steps: 1, 2, 3, 7, 8.
2. In OpenWrt command line run following commands:
ubirmvol /dev/ubi0 -N rootfs_data
ubirmvol /dev/ubi0 -N rootfs
ubirmvol /dev/ubi0 -N kernel
ubirename /dev/ubi0 kernel1 kernel ubi_rootfs1 ubi_rootfs
ubimkvol /dev/ubi0 -S 34 -N kernel1
ubimkvol /dev/ubi0 -S 320 -N ubi_rootfs1
ubimkvol /dev/ubi0 -S 264 -N rootfs_data
fw_setenv bootcmd bootipq
3. Reboot.
Known issues
The LEDs ring doesn't have any dedicated driver or application to control
it, the only available option atm is to manipulate it with 'i2cset'
command. The default action after applying power to device is spinning
blue light. This light will stay active at all time. To disable it
install 'i2c-tools' with opkg and run:
i2cset -y 2 0x48 3 1 0 0 i
The light will stay off until next cold boot.
Additional information
After completing 5. step from installation guide, one can disable asking
for root password on OEM firmware by running:
sed -e 's/root:x:/root::/' -i /etc/passwd
This is useful for investigating the OEM firmware. One can look
at the communication between the stock firmware and the vendor's
cloud servers or as a way of making a backup of both flash chips.
The root password seems to be constant across all sold devices.
This is output of 'led_ctl' from OEM firmware to illustrate
possibilities of LEDs ring:
Usage: led_ctl [status | upgrade | force_upgrade | version]
led_ctl solid COLOR <brightness>
led_ctl single COLOR INDEX <brightness 0 - 15>
led_ctl spinning COLOR <period 1 - 16 (lower = faster)>
led_ctl fill COLOR <period 1 - 16 (lower = faster)>
( default is 5 )
led_ctl flashing COLOR <on dur 1 - 128> <off dur 1 - 128>
(default is 34) ( default is 34 )
led_ctl pulsing COLOR
COLOR: red, green, blue, yellow, purple, cyan, white
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
[squash "ipq-wifi: add BDFs for Luma Home WRTQ-329ACN" into commit,
changed ubi volumes for easier integration, slightly reworded
commit message, changed ubi volume layout to use standard names all
around]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
|
|
|
|
|
|
|
|
|
|
| |
It should return false to indicate that the option should not be ignored
Fixes 064dc1e8 ("dnsmasq: abort when dnssec requested but not
available")
Reported-by: Sami Olmari <sami@olmari.fi>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The TFTP server provided by dnsmasq supports serving a select boot image
based on the client's MAC or IP address. This allows an administrator
to activate this feature in /etc/config/dhcp. Here is an example
/etc/config/dhcp that configures dnsmasq with --tftp-unique-root=mac:
...
config dnsmasq
option enable_tftp 1
option tftp_root /usr/libexec/tftpboot
option tftp_unique_root mac
config boot router
option serveraddress 192.168.1.1
option servername tftp.example.com
option filename openwrt-initramfs-kernel.bin
...
With this configuration, dnsmasq will serve
/usr/libexec/tftpboot/00-11-22-33-44-55/openwrt-initramfs-kernel.bin to
the client with MAC address 00:11:22:33:44:55.
Signed-off-by: W. Michael Petullo <mike@flyn.org>
|
|
|
|
|
|
| |
Fix route short circuit config option; fixes commit 036221ce5a899eb99ef1c1623fc9460af00a69e7
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add config options:
srcportmin/srcportmax : range of port numbers to use as UDP source ports
to communicate to the remote VXLAN tunnel endpoint
ageing : lifetime in seconds of FDB entries learnt by the kernel
maxaddress : maximum number of FDB entries
learning : enable/disable entering unknown source link layer addresses
and IP addresses into the VXLAN device FDB.
rsc : enable/disable route short circuit
proxy : enable/disable ARP proxy
l2miss : enable/disable netlink LLADDR miss notifications
l3miss : enable/disable netlink IP ADDR miss notifications
gbp : enable/disable the Group Policy extension
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This submission relied heavily on the work of
Santiago Rodriguez-Papa <contact at rodsan.dev>
Specifications:
* SoC: MediaTek MT7621A (880 MHz 2c/4t)
* RAM: Winbond W632GG6MB-12 (256M DDR3-1600)
* Flash: Winbond W29N01HVSINA (128M NAND)
* Eth: MediaTek MT7621A (10/100/1000 Mbps x5)
* Radio: MT7603E/MT7615N (2.4 GHz & 5 GHz)
4 antennae: 1 internal and 3 non-deatachable
* USB: 3.0 (x1)
* LEDs:
White (x1 logo)
Green (x6 eth + wps)
Orange (x5, hardware-bound)
* Buttons:
Reset (x1)
WPS (x1)
Installation:
Flash factory image through GUI.
This might fail due to the A/B nature of this device. When flashing, OEM
firmware writes over the non-booted partition. If booted from 'A',
flashing over 'B' won't work. To get around this, you should flash the
OEM image over itself. This will then boot the router from 'B' and
allow you to flash OpenWRT without problems.
Reverting to factory firmware:
Hard-reset the router three times to force it to boot from 'B.' This is
where the stock firmware resides. To remove any traces of OpenWRT from
your router simply flash the OEM image at this point.
Signed-off-by: J. Scott Heppler <shep971@centurylink.net>
|
|
|
|
|
|
|
|
|
| |
73301065ac32 mt76: mt7615: reduce maximum VHT MPDU length to 7991
8c47ed12c2be mt76: mt7915: add offchannel condition in switch channel command
1449e602fa10 mt76: Convert to DEFINE_SHOW_ATTRIBUTE
b22977c2727d mt76: mt7663s: remove max_tx_fragments limitation
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
| |
Reset the connection monitor on all acked frames
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
|
|
| |
Make the BSSID and SSID fields optional when configuring a neighbor
report into hostapd.
Both options can now be an empty string. For the BSSID, the first 6 byte
are copied from the neighbor report. For the SSID, the SSID for the
affected hostapd BSS is used.
Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
|
|
|
|
|
|
|
|
|
| |
Rafal Milecki pointed out that ubus events are meant for low-level ubus
events only (e.g. addition or removal of an object). Higher level
events should happen as notifications on the ubus object itself.
Dispatch BSS events on the main hostapd ubus object instead of
publishing them as ubus events.
Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
|
|
|
|
|
| |
The return-code was set, however it was never returned, nor was
the loop interrupted.
Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
|
|
|
|
|
| |
Dispatch ubus events also to procd in order to trigger service reloads
on hostapd updates.
Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
|
|
|
|
|
|
|
|
|
| |
hostapd will emit a ubus event with the eventname hostapd.<ifname>.<event>
when adding, removing or reloading a BSS.
This way, services which install state (for example the RMM neighbor
list) can on-demand reinstall this information for the BSS without
polling this state.
Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
|
|
|
|
|
|
|
| |
UCI defaults scripts are supposed to be numbered, but odhcpd's lacked numbering, which
turned out to mess up my custom scripts numbered 9[0-9]_*. The idea is to have high number
(custom) scripts executed last. Jow confirmed numbering is the default case, not the
exception (thanks).
Signed-off-by: Stijn Segers <foss@volatilesystems.org>
|
|
|
|
|
| |
Fixes: 7817c831ef ("policycoreutils: break into smaller packages")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
|
|
|
|
|
|
|
| |
Instead of vaguely describing dependencies in the package description
actually split-up into individual packages, each with their
dependencies expressed accurately.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
|
|
|
|
|
|
|
| |
Split utility packages similar to coreutils in packages feed, adding
ALTERNATIVES for those which are also provided by busybox-selinux.
Also add missing license information.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
|
|
|
|
|
|
|
|
| |
When the nulldata frame was acked, the probe send count needs to be reset,
otherwise it will keep increasing until the connection is considered dead,
even though it fine.
Reported-by: Georgi Valkov <gvalkov@abv.bg>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The required BusyBox applets are enabled by default, so we can rely on them
being present in the system. This way, we make sure there are no conflicts
with less featured variants of these same applets which might also be
present in the system.
Fixes: 0bd7dfa3ed60 ("zram-swap: enable swap discard")
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
[wrap commit description]
Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
|
|
|
|
|
|
|
|
| |
Some 5GHz wifi interfaces, especially in Tri-band routers, can't use
channel 36. In these cases, the default configuration for 5GHz
interfaces, once enabled, doesn't work.
This patch selects the first non-disabled channel for 5GHz interfaces.
Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
We want to be able to make full system images for this system too, just
as we now can for the MT7623 platforms.
The package directory (mt7623n) is now a bit misnamed as it's overly
specific, but the precise set of platforms which we support this way
is evolving and we'll fix it up when the dust settles and we know what
nomenclature makes most sense.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use build variants to cover all 11 hardware options [0]:
espressobin-512mb
espressobin-v3-v5-1gb-1cs
espressobin-v3-v5-1gb-1cs-emmc
espressobin-v3-v5-1gb-2cs
espressobin-v3-v5-1gb-2cs-emmc
espressobin-v3-v5-2gb
espressobin-v3-v5-2gb-emmc
espressobin-v7-1gb
espressobin-v7-1gb-emmc
espressobin-v7-2gb
espressobin-v7-2gb-emmc
CLOCKSPRESET is set to CPU_800_DDR_800 for all builds, which is the only
stable configuration. That actually matches what Globalscale shipped as
CPU_1000_DDR_800 combined with kernel versions < v4.19.42. [1][2].
[0] https://github.com/ARM-software/arm-trusted-firmware/blob/master/docs/plat/marvell/armada/build.rst
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=8db82563451f976597ab7b282ec655e4390a4088
[2] https://forum.armbian.com/topic/10335-espressobin-update-to-585-results-in-kernel-panic/?tab=comments#comment-79916
Signed-off-by: Andre Heider <a.heider@gmail.com>
|
|
|
|
|
|
|
|
|
|
| |
Update to current head of the branch A3700_utils-armada-18.12-fixed:
0967979 ddr: Add DDR3 2CS layout for EspressoBin v5 2GB board
486523e ddr: fix typo for ESPRESSObin 2GB layout
490b2b3 TBB: Fix building for Crypto++ 6.0 and later
0141dd1 TBB: Split INCDIR from LIBDIR
Signed-off-by: Andre Heider <a.heider@gmail.com>
|
|
|
|
|
|
|
| |
Switch to release tarballs and add missing license information while
here.
Signed-off-by: Andre Heider <a.heider@gmail.com>
|
|
|
|
|
|
|
|
|
| |
Lift the dependency on the build order, where flash-image.bin may be missing
from the u-boot dir.
While at it, also install the uart images for rescue purposes.
Signed-off-by: Andre Heider <a.heider@gmail.com>
|
|
|
|
|
|
|
| |
Gets rid of these warnings:
cc1: note: someone does not honour COPTS correctly, passed 0 times
Signed-off-by: Andre Heider <a.heider@gmail.com>
|
|
|
|
|
|
| |
Don't wipe internal state files, fixes e.g. refreshing patches.
Signed-off-by: Andre Heider <a.heider@gmail.com>
|
|
|
|
|
|
|
| |
This builds two u-boot binaries: one for boards without eMMC and one
with.
Signed-off-by: Andre Heider <a.heider@gmail.com>
|
|
|
|
|
|
|
|
| |
TODO: switch to release v2020.10 once released.
Remove one merged patch, refresh the rest.
Signed-off-by: Andre Heider <a.heider@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With global NLS support enabled (CONFIG_BUILD_NLS), the linked libelf.so
and libbfd.so libraries will depend on libintl.so. Import the nls.mk helper
to set library prefixes and flags accordingly, and also conditionally add
"-lintl" as link-time library.
Fix a build error on ppc due to a EDEADLOCK redefinition in errno.h.
Use upstream stable kernel 5.8.9, and fix overriding of feature detection
to only allow/hide detected features. Also refresh existing patches.
Fixes: 2f0d672088 ("bpftools: add utility and library packages supporting
eBPF usage")
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
intel-microcode (3.20200616.1)
* New upstream microcode datafile 20200616
+ Downgraded microcodes (to a previously shipped revision):
sig 0x000406e3, pf_mask 0xc0, 2019-10-03, rev 0x00d6, size 101376
sig 0x000506e3, pf_mask 0x36, 2019-10-03, rev 0x00d6, size 101376
* Works around hangs on boot on Skylake-U/Y and Skylake Xeon E3,
* This update *removes* the SRBDS mitigations from the above processors
* Note that Debian had already downgraded 0x406e3 in release 3.20200609.2
intel-microcode (3.20200609.2)
* REGRESSION FIX: 0x406e3: rollback to rev 0xd6 and document regression
* Microcode rollbacks (closes: LP#1883002)
sig 0x000406e3, pf_mask 0xc0, 2019-10-03, rev 0x00d6, size 101376
* THIS REMOVES THE SECURITY FIXES FOR SKYLAKE-U/Y PROCESSORS
* Avoid hangs on boot on (some?) Skylake-U/Y processors,
* ucode-blacklist: blacklist models 0x8e and 0x9e from late-loading,
just in case. Note that Debian does not do late loading by itself.
Refer to LP#1883002 for the report, 0x806ec hangs upon late load.
intel-microcode (3.20200609.1)
* SECURITY UPDATE
* For most processors: SRBDS and/or VRDS, L1DCES mitigations depending
on the processor model
* For Skylake HEDT and Skylake Xeons with signature 0x50654: VRDS and
L1DCES mitigations, plus mitigations described in the changelog entry
for package release 3.20191112.1.
* Expect some performance impact, the mitigations are enabled by
default. A Linux kernel update will be issued that allows one to
selectively disable the mitigations.
* New upstream microcode datafile 20200609
* Implements mitigation for CVE-2020-0543 Special Register Buffer Data
Sampling (SRBDS), INTEL-SA-00320, CROSSTalk
* Implements mitigation for CVE-2020-0548 Vector Register Data Sampling
(VRDS), INTEL-SA-00329
* Implements mitigation for CVE-2020-0549 L1D Cache Eviction Sampling
(L1DCES), INTEL-SA-00329
* Known to fix the regression introduced in release 2019-11-12 (sig
0x50564, rev. 0x2000065), which would cause several systems with
Skylake Xeon, Skylake HEDT processors to hang while rebooting
* Updated Microcodes:
sig 0x000306c3, pf_mask 0x32, 2019-11-12, rev 0x0028, size 23552
sig 0x000306d4, pf_mask 0xc0, 2019-11-12, rev 0x002f, size 19456
sig 0x00040651, pf_mask 0x72, 2019-11-12, rev 0x0026, size 22528
sig 0x00040661, pf_mask 0x32, 2019-11-12, rev 0x001c, size 25600
sig 0x00040671, pf_mask 0x22, 2019-11-12, rev 0x0022, size 14336
sig 0x000406e3, pf_mask 0xc0, 2020-04-27, rev 0x00dc, size 104448
sig 0x00050653, pf_mask 0x97, 2020-04-24, rev 0x1000157, size 32768
sig 0x00050654, pf_mask 0xb7, 2020-04-24, rev 0x2006906, size 34816
sig 0x00050656, pf_mask 0xbf, 2020-04-23, rev 0x4002f01, size 52224
sig 0x00050657, pf_mask 0xbf, 2020-04-23, rev 0x5002f01, size 52224
sig 0x000506e3, pf_mask 0x36, 2020-04-27, rev 0x00dc, size 104448
sig 0x000806e9, pf_mask 0x10, 2020-04-27, rev 0x00d6, size 103424
sig 0x000806e9, pf_mask 0xc0, 2020-04-27, rev 0x00d6, size 103424
sig 0x000806ea, pf_mask 0xc0, 2020-04-27, rev 0x00d6, size 103424
sig 0x000806eb, pf_mask 0xd0, 2020-04-27, rev 0x00d6, size 103424
sig 0x000806ec, pf_mask 0x94, 2020-04-23, rev 0x00d6, size 103424
sig 0x000906e9, pf_mask 0x2a, 2020-04-23, rev 0x00d6, size 103424
sig 0x000906ea, pf_mask 0x22, 2020-04-27, rev 0x00d6, size 102400
sig 0x000906eb, pf_mask 0x02, 2020-04-23, rev 0x00d6, size 103424
sig 0x000906ec, pf_mask 0x22, 2020-04-27, rev 0x00d6, size 102400
sig 0x000906ed, pf_mask 0x22, 2020-04-23, rev 0x00d6, size 103424
* Restores the microcode-level fixes that were reverted by release
3.20191115.2 for sig 0x50654 (Skylake Xeon, Skylake HEDT)
intel-microcode (3.20200520.1)
* New upstream microcode datafile 20200520
+ Updated Microcodes:
sig 0x000206d6, pf_mask 0x6d, 2020-03-04, rev 0x0621, size 18432
sig 0x000206d7, pf_mask 0x6d, 2020-03-24, rev 0x071a, size 19456
intel-microcode (3.20200508.1)
* New upstream microcode datafile 20200508
+ Updated Microcodes:
sig 0x000706e5, pf_mask 0x80, 2020-03-12, rev 0x0078, size 107520
* Likely fixes several critical errata on IceLake-U/Y causing system
hangs
intel-microcode (3.20191115.2)
* Microcode rollbacks (closes: #946515, LP#1854764):
sig 0x00050654, pf_mask 0xb7, 2019-07-31, rev 0x2000064, size 33792
* Avoids hangs on warm reboots (cold boots work fine) on HEDT and
Xeon processors with signature 0x50654.
intel-microcode (3.20191115.1)
* New upstream microcode datafile 20191115
+ Updated Microcodes:
sig 0x000406e3, pf_mask 0xc0, 2019-10-03, rev 0x00d6, size 101376
sig 0x000506e3, pf_mask 0x36, 2019-10-03, rev 0x00d6, size 101376
sig 0x000806e9, pf_mask 0x10, 2019-10-15, rev 0x00ca, size 100352
sig 0x000806e9, pf_mask 0xc0, 2019-09-26, rev 0x00ca, size 100352
sig 0x000806ea, pf_mask 0xc0, 2019-10-03, rev 0x00ca, size 100352
sig 0x000806eb, pf_mask 0xd0, 2019-10-03, rev 0x00ca, size 100352
sig 0x000806ec, pf_mask 0x94, 2019-10-03, rev 0x00ca, size 100352
sig 0x000906e9, pf_mask 0x2a, 2019-10-03, rev 0x00ca, size 100352
sig 0x000906ea, pf_mask 0x22, 2019-10-03, rev 0x00ca, size 99328
sig 0x000906eb, pf_mask 0x02, 2019-10-03, rev 0x00ca, size 100352
sig 0x000906ec, pf_mask 0x22, 2019-10-03, rev 0x00ca, size 99328
sig 0x000906ed, pf_mask 0x22, 2019-10-03, rev 0x00ca, size 100352
sig 0x000a0660, pf_mask 0x80, 2019-10-03, rev 0x00ca, size 91136
intel-microcode (3.20191113.1)
* New upstream microcode datafile 20191113
+ SECURITY UPDATE, refer to the 3.20191112.1 changelog entry for details
Adds microcode update for CFL-S (Coffe Lake Desktop)
INTEL-SA-00270, CVE-2019-11135, CVE-2019-0117
+ Updated Microcodes (previously removed):
sig 0x000906ec, pf_mask 0x22, 2019-08-14, rev 0x00c6, size 99328
intel-microcode (3.20191112.1)
* New upstream microcode datafile 20191112
+ SECURITY UPDATE
- Implements MDS mitigation (TSX TAA), INTEL-SA-00270, CVE-2019-11135
- Implements TA Indirect Sharing mitigation, and improves the
MDS mitigation (VERW)
- Fixes FIVR (Xeon Voltage Modulation) vulnerability, INTEL-SA-00271,
CVE-2019-11139
- Fixes SGX vulnerabilities and errata (including CVE-2019-0117)
+ CRITICAL ERRATA FIXES
- Fixes Jcc conditional jump macro-fusion erratum (Skylake+, except
Ice Lake), causes a 0-3% typical perforance hit (can be as bad
as 10%). But ensures the processor will actually jump where it
should, so don't even *dream* of not applying this fix.
- Fixes AVX SHUF* instruction implementation flaw erratum
+ Removed Microcodes:
sig 0x000906ec, pf_mask 0x22, 2019-02-14, rev 0x00ae, size 98304
+ New Microcodes:
sig 0x000406d8, pf_mask 0x01, 2019-09-16, rev 0x012d, size 84992
sig 0x00050656, pf_mask 0xbf, 2019-09-05, rev 0x400002c, size 51200
sig 0x00060663, pf_mask 0x80, 2018-04-17, rev 0x002a, size 87040
sig 0x000706a8, pf_mask 0x01, 2019-08-29, rev 0x0016, size 74752
sig 0x000706e5, pf_mask 0x80, 2019-09-05, rev 0x0046, size 102400
sig 0x000a0660, pf_mask 0x80, 2019-08-27, rev 0x00c6, size 91136
+ Updated Microcodes:
sig 0x000406e3, pf_mask 0xc0, 2019-08-14, rev 0x00d4, size 101376
sig 0x00050654, pf_mask 0xb7, 2019-09-05, rev 0x2000065, size 34816
sig 0x00050657, pf_mask 0xbf, 2019-09-05, rev 0x500002c, size 51200
sig 0x000506e3, pf_mask 0x36, 2019-08-14, rev 0x00d4, size 101376
sig 0x000706a1, pf_mask 0x01, 2019-08-28, rev 0x0032, size 73728
sig 0x000806e9, pf_mask 0x10, 2019-08-14, rev 0x00c6, size 99328
sig 0x000806e9, pf_mask 0xc0, 2019-08-14, rev 0x00c6, size 100352
sig 0x000806ea, pf_mask 0xc0, 2019-08-14, rev 0x00c6, size 99328
sig 0x000806eb, pf_mask 0xd0, 2019-08-14, rev 0x00c6, size 100352
sig 0x000806ec, pf_mask 0x94, 2019-08-14, rev 0x00c6, size 100352
sig 0x000906e9, pf_mask 0x2a, 2019-08-14, rev 0x00c6, size 100352
sig 0x000906ea, pf_mask 0x22, 2019-08-14, rev 0x00c6, size 99328
sig 0x000906eb, pf_mask 0x02, 2019-08-14, rev 0x00c6, size 100352
sig 0x000906ed, pf_mask 0x22, 2019-08-14, rev 0x00c6, size 99328
+ Updated Microcodes (previously removed):
sig 0x00050653, pf_mask 0x97, 2019-09-09, rev 0x1000151, size 32768
Signed-off-by: Tan Zien <nabsdh9@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
amd64-microcode (3.20191218.1)
* New microcode update packages from AMD upstream:
+ Removed Microcode updates (known to cause issues):
sig 0x00830f10, patch id 0x08301025, 2019-07-11
* README: update for new release
amd64-microcode (3.20191021.1)
* New microcode update packages from AMD upstream:
+ New Microcodes:
sig 0x00830f10, patch id 0x08301025, 2019-07-11
+ Updated Microcodes:
sig 0x00800f12, patch id 0x08001250, 2019-04-16
sig 0x00800f82, patch id 0x0800820d, 2019-04-16
amd64-microcode (3.20181128.1)
* New microcode update packages from AMD upstream:
+ New Microcodes:
sig 0x00800f82, patch id 0x0800820b, 2018-06-20
Signed-off-by: Tan Zien <nabsdh9@gmail.com>
|
|
|
|
|
|
|
|
|
|
| |
CONFIG_BMP085* is replaced by CONFIG_BMP280 since 4.9[1] and this package is empty.
OpenWRT also has kmod-iio-bmp280* package and we can drop old packages.
1. [ misc: retire the old BMP085 driver ]
(https://github.com/torvalds/linux/commit/832c8232dd7be4977ae9fb9c7cbc4decce19a8fc#diff-5000d544d790c669405eb2a6775e5981)
Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
|
|
|
|
|
|
| |
add kernel module igc support Intel Ethernet Controller I225 Series.
Signed-off-by: Tan Zien <nabsdh9@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
3b946a6dc588 mt76: dma: cache dma map address/len in struct mt76_queue_entry
c4c8b6a20d3b mt76: mt7915: fix HE BSS info
15391c1c947f mt76: fix tx hang on non-AQL frame limit
72c8a81e64e8 mt76: mt7915: fix encap offload multicast traffic with 4-address mode
69b3f868d14b mt76: mt7915: use napi_consume_skb to bulk-free tx skbs
5f080033ec7d mt76: move txwi handling code to dma.c, since it is mmio specific
b1f425686125 mt76: mt7915: fix VHT LDPC capability
8f48855f5d14 mt76: mt7915: simplify mt7915_lmac_mapping
cfaf40858718 mt76: mt7915: fix queue/tid mapping for airtime reporting
115b62efac21 mt76: remove retry_q from struct mt76_txq and related code
e22c65cdc585 mt76: mt7915: simplify checks for the 802.3 offload path
bab866a01e4f mt76: mt7915: fix unexpected firmware mode
0fc3c5eb61d0 mt76: dma: queue more rx frames internally before passing them to the stack
130e5de09364 Revert "mt76: dma: queue more rx frames internally before passing them to the stack"
e3af31409d41 update mt7915 firmware to the latest version
e2b8a4ec9891 mt76: testmode: add a limit for queued tx_frames packets
146488631f7b mt76: mt7615: Remove set but unused variable 'index'
0b7d2b76288e mt76: mt7615: fix VHT LDPC capability
848f4a6334a8 mt76: mt7622: fix fw hang on mt7622
0a955d944bd0 mt76: mt7663s: do not use altx for ctl/mgmt traffic
13b96411513b mt76: mt7663s: split mt7663s_tx_update_sched in mt7663s_tx_{pick,update}_quota
d62ba15b1bbf mt76: mt7663s: introduce __mt7663s_xmit_queue routine
fdf14d1b6aec mt76: move pad estimation out of mt76_skb_adjust_pad
d048f8e87ba0 mt76: mt7663s: fix possible quota leak in mt7663s_refill_sched_quota
979c0fdc5d27 mt76: mt7663s: introduce sdio tx aggregation
56e77a3a3ade mt76: mt7663: check isr read return value in mt7663s_rx_work
f96cffa03e57 mt76: mt7615: unlock dfs bands
1ccd31bbe1f4 mt76: Use fallthrough pseudo-keyword
448cd2d36ee2 mt76: mt76x0: Move tables used only by init.c to their own header file
17ba3432f5af Revert "mt76: mt7615: unlock dfs bands"
fee1f4a8e87f mt76: mt7915: fix possible memory leak in mt7915_mcu_add_beacon
5b78e5292777 mt76: Fix unsigned expressions compared with zero
ec84891a4d23 mt76: mt7915: convert to use le16_add_cpu()
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
| |
3fea655 rc: support init.d scripts with START=0
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|