aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* ath79: Add support for OpenMesh MR600 v1Sven Eckelmann2021-01-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device specifications: ====================== * Qualcomm/Atheros AR9344 rev 2 * 560/450/225 MHz (CPU/DDR/AHB) * 128 MB of RAM * 16 MB of SPI NOR flash - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 2T2R 2.4 GHz Wi-Fi * 2T2R 5 GHz Wi-Fi * 4x GPIO-LEDs (2x wifi, 1x wps, 1x power) * 1x GPIO-button (reset) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 1x ethernet - AR8035 ethernet PHY (RGMII) - 10/100/1000 Mbps Ethernet - 802.3af POE - used as LAN interface * 12-24V 1A DC * internal antennas Flashing instructions: ====================== Various methods can be used to install the actual image on the flash. Two easy ones are: ap51-flash ---------- The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the image to the u-boot when the device boots up. initramfs from TFTP ------------------- The serial console must be used to access the u-boot shell during bootup. It can then be used to first boot up the initramfs image from a TFTP server (here with the IP 192.168.1.21): setenv serverip 192.168.1.21 setenv ipaddr 192.168.1.1 tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr The actual sysupgrade image can then be transferred (on the LAN port) to the device via scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/ On the device, the sysupgrade must then be started using sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin Signed-off-by: Sven Eckelmann <sven@narfation.org> [rebase, make WLAN LEDs consistent, add LED migration] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* owipcalc: remove clone in cidr_contains6Nick Hainke2021-01-192-6/+5
| | | | | | | | | | The "cidr_contains6" functions clones the given cidr. The contains4 does not clone the cidr. Both functions do not behave the same. I see no reason to push the cidr. I think that we get only a negligible performance gain, but it makes ipv4 and ipv6 equal again. Signed-off-by: Nick Hainke <vincent@systemli.org>
* dnsmasq: Update to version 2.83Hauke Mehrtens2021-01-192-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes the following security problems in dnsmasq: * CVE-2020-25681: Dnsmasq versions before 2.83 is susceptible to a heap-based buffer overflow in sort_rrset() when DNSSEC is used. This can allow a remote attacker to write arbitrary data into target device's memory that can lead to memory corruption and other unexpected behaviors on the target device. * CVE-2020-25682: Dnsmasq versions before 2.83 is susceptible to buffer overflow in extract_name() function due to missing length check, when DNSSEC is enabled. This can allow a remote attacker to cause memory corruption on the target device. * CVE-2020-25683: Dnsmasq version before 2.83 is susceptible to a heap-based buffer overflow when DNSSEC is enabled. A remote attacker, who can create valid DNS replies, could use this flaw to cause an overflow in a heap- allocated memory. This flaw is caused by the lack of length checks in rtc1035.c:extract_name(), which could be abused to make the code execute memcpy() with a negative size in get_rdata() and cause a crash in Dnsmasq, resulting in a Denial of Service. * CVE-2020-25684: A lack of proper address/port check implemented in Dnsmasq version < 2.83 reply_query function makes forging replies easier to an off-path attacker. * CVE-2020-25685: A lack of query resource name (RRNAME) checks implemented in Dnsmasq's versions before 2.83 reply_query function allows remote attackers to spoof DNS traffic that can lead to DNS cache poisoning. * CVE-2020-25686: Multiple DNS query requests for the same resource name (RRNAME) by Dnsmasq versions before 2.83 allows for remote attackers to spoof DNS traffic, using a birthday attack (RFC 5452), that can lead to DNS cache poisoning. * CVE-2020-25687: Dnsmasq versions before 2.83 is vulnerable to a heap-based buffer overflow with large memcpy in sort_rrset() when DNSSEC is enabled. A remote attacker, who can create valid DNS replies, could use this flaw to cause an overflow in a heap-allocated memory. This flaw is caused by the lack of length checks in rtc1035.c:extract_name(), which could be abused to make the code execute memcpy() with a negative size in sort_rrset() and cause a crash in dnsmasq, resulting in a Denial of Service. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-at91: Add PKG_MIRROR_HASH to fix downloadHauke Mehrtens2021-01-181-0/+1
| | | | | | | | | | | The referenced commit is gone, but we already have this file on our mirror, use that one by providing the correct mirror hash. I generated a tar.xz file with the given git commit hash using a random fork on github and it generated the same tar.xz file as found on our mirror so this looks correct. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* at91bootstrap: Add PKG_MIRROR_HASH to fix downloadHauke Mehrtens2021-01-181-0/+1
| | | | | | | | | | | The referenced commit is gone, but we already have this file on our mirror, use that one by providing the correct mirror hash. I generated a tar.xz file with the given git commit hash using a random fork on github and it generated the same tar.xz file as found on our mirror so this looks correct. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bcm63xx-cfe: enable package for bcm4908Rafał Miłecki2021-01-181-2/+2
| | | | | | bcm4908 target needs to include cferam images in firmware files too Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mbedtls: update to 2.16.9Rosen Penev2021-01-181-2/+2
| | | | Signed-off-by: Rosen Penev <rosenp@gmail.com>
* netifd: fix IPv6 routing loop on point-to-point linksHans Dedecker2021-01-171-3/+3
| | | | | | | | c00c833 interface-ip: add unreachable route if address is offlink e71909c interface-ip: coding style fixes Tested-by: Karl Vogel <karl.vogel@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcp6c: fix routing loop on point-to-point linksHans Dedecker2021-01-171-3/+3
| | | | | | | | 53f07e9 ra: fix routing loop on point to point links 2b6959d ra: align ifindex resolving Tested-by: Karl Vogel <karl.vogel@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* libusb: make InstallDev explicitRosen Penev2021-01-161-2/+7
| | | | | | Helps to see what actually gets installed. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* libusb: cleanup PKG_ variablesRosen Penev2021-01-161-4/+5
| | | | | | | | | | Reordered for consistency between packages. Fixed license information. Change PKG_BUILD_PARALLEL to 1. This is no longer a problem.1 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* libusb: update to 1.0.24Rosen Penev2021-01-161-3/+3
| | | | Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: drop empty kmod-ledtrig-* packagesSungbo Eo2021-01-151-61/+0
| | | | | | | | | | | | | | The following four led triggers are enabled in generic config. * kmod-ledtrig-default-on * kmod-ledtrig-heartbeat * kmod-ledtrig-netdev * kmod-ledtrig-timer Drop the packages and remove them from DEVICE_PACKAGES. There's no other package depending on them in this repo. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* hostapd: fix setting wps_state to "not configured"Leon M. George2021-01-152-2/+2
| | | | | | | | | | | | | | | With encryption disabled, it was intended to set wpa_state=1 (enabled, not configured) through the 'wps_not_configured' flag. The flag is set appropriately but the condition using it is broken. Instead, 'wps_configured' is checked and wpa_state is always 2 (enabled, configured). Fix it by using the correct variable name. Fixes: 498d84fc4e00 ("netifd: add wireless configuration support and port mac80211 to the new framework") Signed-off-by: Leon M. George <leon@georgemail.eu> [commit title/message improvements] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: update kmod-thermal packageSungbo Eo2021-01-151-7/+4
| | | | | | | | | | | CONFIG_THERMAL option was changed to boolean in upstream linux commit 554b3529fe01 ("thermal/drivers/core: Remove the module Kconfig's option"). Switch it to 'y' and remove FILES and AUTOLOAD for non-existant module file. And update the descripton text for the package as in upstream linux commit eb8504620381 ("thermal: Rephrase the Kconfig text for thermal"). Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* owipcalc: use v6 in cidr_parse6 functionNick Hainke2021-01-152-5/+5
| | | | | | | | | | | The cidr_parse6 function parses a string to an ipv6-address. The cidr struct contains a union called buf for the ipv4 and ipv6 address. Since it is a char pointer and the struct is initialized with the maximum size (so ipv6 string) it does not make any difference. However, we should access the buffer using the v6 name, since it could be confusing otherwise. Signed-off-by: Nick Hainke <vincent@systemli.org>
* mac80211: fix rounding error in minstrel_ht throughput calculationFelix Fietkau2021-01-151-0/+34
| | | | | | Fixes rate selection with lower data rates Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix an uninitialized stack variable in the minstrel updateFelix Fietkau2021-01-142-3/+11
| | | | | | It can lead to out-of-bounds access and invalid rates Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-01-142-28/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | a46f9a9160e9 mt76: mt7915: add vif check in mt7915_update_vif_beacon() 27ad12352ac9 mt76: mt7615: add vif check in mt7615_update_vif_beacon() 0a449cef024e mt76: mt7915: fix MT_CIPHER_BIP_CMAC_128 setkey eacd2d493c61 mt76: mt7915: reset token when mac_reset happens e4b23301e6c9 mt76: mt7615: reset token when mac_reset happens 6e22bbfe0360 mt76: mt7615: convert comma to semicolon 37865118ae2d mt76: mt7915: convert comma to semicolon 742c36b2e527 mt76: mt7915: run mt7915_configure_filter holding mt76 mutex a515727e8423 mt76: mt7915: add support for flash mode b6f7b3da5216 mt76: mt7915: fix endianness warning in mt7915_mcu_set_radar_th 062f3f4f06a2 mt76: mt7915: simplify mt7915_mcu_send_message routine dbba9b993300 mt76: mt7915: drop zero-length packet to avoid Tx hang 36a745d0f71c mt76: Fix queue ID variable types after mcu queue split a4539760b0b1 mt7915: update the testmode support to the latest upstream patch 64bd6f87e4c2 mt7915: fix crash on failure in pci_set_dma_mask c202ace409e0 mt76: remove unused variable q d1b827781f84 mt76: mt7915: add partial add_bss_info command on testmode init a897a69769f5 mt76: testmode: introduce dbdc support b44472e99822 mt76: testmode: move mtd part to mt76_dev 45e27e6cdc12 mt76: mt7915: move testmode data from dev to phy b6673b005770 mt76: mt7615: move testmode data from dev to phy abdd471e9f2d mt76: mt7915: fix ht mcs in mt7915_mcu_get_rx_rate() d679b56b9585 mt76: move mac_work in mt76_core module 36cd48ab4454 mt76: move chainmask in mt76_phy 89a6781ed045 mt76: mt7915: force ldpc for bw larger than 20MHz in testmode 3d0834e78005 mt76: testmode: add support to set user-defined spe index cc05f4679667 mt76: testmode: add attributes for ipg related parameters 77b18b16fe16 mt76: testmode: make tx queued limit adjustable 6365a58573cb mt76: mt7915: split edca update function e56282bf67f6 mt76: mt7915: add support for ipg in testmode 6fa642903e4e mt76: mt7915: calculate new packet length when tx_time is set in testmode 729ec5daeba5 mt76: mt7915: clean hw queue before starting new testmode tx 981443da5cf7 mt76: testmode: add a new state for continuous tx 4793fc9b3d48 mt76: mt7915: rework set state part in testmode 11a1e86e5946 mt76: mt7915: add support for continuous tx in testmode 364affef82fc mt76: mt7615: mt7915: disable txpower sku when testmode enabled 9fc19db51293 mt76: mt7915: simplify peer's TxBF capability check 6377b7f330be mt76: mt7915: add implicit Tx beamforming support 983091a40633 mt76: mt7915: fix MESH ifdef block bbb7a9e77751 mt76: mt76u: fix NULL pointer dereference in mt76u_status_worker a28a8dd2f7de mt76: usb: fix crash on device removal 9c312f2ce2c5 mt76: mt7915: rework mcu API e6fe82acb111 mt76: mt7915: disable RED support in the WA firmware 25d7429bdc41 mt76: mt7915: fix eeprom parsing for DBDC 7a93026dd3dc mt76: mt7915: fix eeprom DBDC band selection 4c8a09cc45d0 tools: Set mode for new file /tmp/mt76-test-%s Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix key_mgmt typoLeon M. George2021-01-142-2/+2
| | | | | | | | | | | The key_mgmt variable was mistyped when checking against "WPS", so the if clause was never entered. Fixes: f5753aae233f ("hostapd: add support for WPS pushbutton station") Signed-off-by: Leon M. George <leon@georgemail.eu> [add commit message, bump PKG_RELEASE] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* hostapd: remove trailing whitespacesLeon M. George2021-01-141-2/+2
| | | | Signed-off-by: Leon M. George <leon@georgemail.eu>
* hostapd: remove unused variableLeon M. George2021-01-141-1/+0
| | | | | | | | | 'base' was never used. Fixes: 498d84fc4e00 ("netifd: add wireless configuration support and port mac80211 to the new framework") Signed-off-by: Leon M. George <leon@georgemail.eu>
* hostapd: remove unused variableLeon M. George2021-01-141-1/+0
| | | | | | | | | 'enc_str' was never used. Fixes: 498d84fc4e00 ("netifd: add wireless configuration support and port mac80211 to the new framework") Signed-off-by: Leon M. George <leon@georgemail.eu>
* hostapd: run as user 'network' if procd-ujail is installedDaniel Golle2021-01-144-2/+55
| | | | | | | Granting capabilities CAP_NET_ADMIN and CAP_NET_RAW allows running hostapd and wpa_supplicant without root priviledges. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: improve error handling when adding hostapd configDaniel Golle2021-01-142-8/+8
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: improve error handling when adding supplicant configDaniel Golle2021-01-142-5/+5
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: add multicast_to_unicast and per_sta_vifEtan Kissling2021-01-142-2/+15
| | | | | | | | This allows configuration of multicast_to_unicast and per_sta_vif options. - multicast_to_unicast requests multicast-to-unicast conversion. - per_sta_vif assigns each station its own AP_VLAN interface. Signed-off-by: Etan Kissling <etan_kissling@apple.com>
* mbedtls: add config option to compile with hkdfEtan Kissling2021-01-141-1/+18
| | | | | | | This adds a config option to allow compiling with HKDF algorithm support to support applications that require this feature. Signed-off-by: Etan Kissling <etan_kissling@apple.com>
* nf-conntrack: allow querying conntrack info in nfqueueEtan Kissling2021-01-141-1/+1
| | | | | | | | | | | This allows libnetfilter_queue to access connection tracking information by requesting NFQA_CFG_F_CONNTRACK. Connection tracking information is provided in the NFQA_CT attribute. CONFIG_NETFILTER_NETLINK_GLUE_CT enables the interaction between nf_queue and nf_conntrack_netlink. Without this option, trying to access connection tracking information results in "Operation not supported". Signed-off-by: Etan Kissling <etan_kissling@apple.com>
* uboot-envtools: add support for Aruba AP-303 and AP-365Jan Alexander2021-01-141-0/+6
| | | | | | | | | Both devices use u-boot env variables to boot OpenWrt from its flash partition. Using u-boot envtools, it is possible to change the bootcmd back to the stock firmware partition directly from OpenWrt without attaching a serial cable or even physically accessing the device. Signed-off-by: Jan Alexander <jan@nalx.net>
* ipq806x: add support for Ubiquiti UniFi AC HDJan Alexander2021-01-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: Qualcomm IPQ8064 RAM: 512MB DDR3 Flash: 256MB NAND (Micron MT29F2G08ABBEAH4) 32MB SPI-NOR (Macronix MX25U25635F) WLAN: Qualcomm Atheros QCA9994 4T4R b/g/n Qualcomm Atheros QCA9994 4T4R a/n/ac ETH: eth0 - SECONDARY (Atheros AR8033) eth1 - MAIN (Atheros AR8033) USB: USB-C LED: Dome (white / blue) BTN: Reset Installation ------------ Copy the OpenWrt sysupgrade image to the /tmp directory of the device using scp. Default IP address is 192.168.1.20 and default username and password are "ubnt". SSH to the device and write the bootselect flag to ensure it is booting from the mtd partition the OpenWrt image will be written to. Verify the output device below matches mtd partition "bootselect" using /proc/mtd. > dd if=/dev/zero bs=1 count=1 seek=7 conv=notrunc of=/dev/mtd11 Write the OpenWrt sysupgrade image to the mtd partition labeled "kernel0". Also verify the used partition device using /proc/mtd. > dd if=/tmp/sysupgrade.bin of=/dev/mtdblock12 Reboot the device. Back to stock ------------- Use the TFTP recovery procedure with the Ubiquiti firmware image to restore the vendor firmware. Signed-off-by: Jan Alexander <jan@nalx.net>
* uboot-rockchip: update NanoPi R2S patchesDavid Bauer2021-01-143-129/+178
| | | | | | | Update the NanoPi R2S to the latest version submitted upstream. Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-rockchip: update to v2021.01Marty Jones2021-01-145-111/+127
| | | | | | | | | | | | Update the U-Boot to version v2021.01. Run-tested: FriendlyARM NanoPi R2S Radxa Rock Pi 4 Pine64 RockPro64 Signed-off-by: Marty Jones <mj8263788@gmail.com> [format commit message] Signed-off-by: David Bauer <mail@david-bauer.net>
* iw: enable HE PHY information for iw-tinyDavid Bauer2021-01-142-28/+12
| | | | | | | | | | Currently PHY information obtained from "iw phy" lacks information about a PHYs HE capabilities when using the by default installed iw-tiny. As there are already 802.11ax supported devices, enabled printing this information for the by-default installed iw variant. Signed-off-by: David Bauer <mail@david-bauer.net>
* mac80211: use hostapd PID returned from config_addDaniel Golle2021-01-102-3/+2
| | | | | | | Use PID returned from config_add instead of querying procd when adding configuration to hostapd. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: return PID on config_add callDaniel Golle2021-01-104-4/+11
| | | | | | | | | To simplify the way netifd acquires the PIDs of wpa_supplicant and hostapd let the config_add method of both of them return the PID of the called process. Use the returned PID instead of querying procd when adding wpa_supplicant configuration. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* iptables: update to 1.8.6Curtis Deptuck2021-01-097-39/+32
| | | | | | | | | | | | | Update iptables to 1.8.6 ChangeLog: https://netfilter.org/projects/iptables/files/changes-iptables-1.8.6.txt Refresh patch: 101-remove-check-already.patch Signed-off-by: Curtis Deptuck <curtdept@me.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [refresh patches]
* kernel: add hid-cp2112 driver supportPawel Dembicki2021-01-071-0/+17
| | | | | | | | This patch adds kernel module for Silicon Labs CP2112 HID USB to SMBus Master Bridge. This is a HID device driver which registers as an i2c adapter and gpiochip to expose these functions of the CP2112. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* base-files: read all 3 bytes in get_magic_vfat() at onceAdrian Schmutzler2021-01-072-2/+2
| | | | | | | While the speed improvement might be negligible, there is still no reason to read individual bytes. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lua: add -ldl for glibc buildsRosen Penev2021-01-061-2/+2
| | | | | | | | | | | | | For glibc, lua needs an explicit link to libdl as glibc has it separate Fixes the following error in at least collectd: ld: usr/lib/liblua.so: undefined reference to `dlopen' ld: usr/lib/liblua.so: undefined reference to `dlclose' ld: usr/lib/liblua.so: undefined reference to `dlerror' ld: usr/lib/liblua.so: undefined reference to `dlsym' Signed-off-by: Rosen Penev <rosenp@gmail.com>
* rpcd: update to git HEADDaniel Golle2021-01-071-4/+4
| | | | | | | | | | fd017ba iwinfo: add ht and vht operation info to wifi scan 4c66b31 iwinfo: export center channel for info ubus call e28d4a5 iwinfo: add support for 802.11ad and GCMP 5c15f57 iwinfo: return hwmode 'ad' on 802.11ad-only hardware ea7f471 iwinfo: include ht_operation data only if available Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* iwinfo: improve ABI version handling and bump to git HEADJo-Philipp Wich2021-01-071-7/+10
| | | | | | | | | | | | | | | | | | - Encode ABI version in compiled shared object file - Only ship versioned shared library a17f561 iwinfo: detect QCA IPQ4019 WiSoC from FDT ea28dfb iwinfo: export ht and vht operation in scan results 4e22953 iwinfo: export center_chan info for local wifi 74d13fb cli: account for additional digit for frequencies above 10GHz 8bfd8d8 iwinfo: add support for GCMP cipher 618c1e8 iwinfo: add hardware description for QCA MIPS WiSoCs 0702f32 iwinfo: improve center channel handling 51c1336 iwinfo: set center chan unsupported for not-nl80211 driver 23d2722 build: add ability to specify shared object version Signed-off-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Revert "iwinfo: update to git HEAD"Jo-Philipp Wich2021-01-061-4/+4
| | | | | | | | | | | | | This reverts commit f1620630e9f3407780ddc554361841f05c996c49. This update introduces potentially remote exploitable buffer overreads in IE parsing logic. It also breaks the ABI without introdcing SOVERSION library versioning. Furthermore, HT information is incorrectly added for non-HT BSSes. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "rpcd: update to git HEAD"Jo-Philipp Wich2021-01-061-4/+4
| | | | | | | | | | | This reverts commit 190e7939639846b86ab487c50169963382720e2b. This update introduces a potential null-pointer deref with subsequent rpcd crash when querying wireless info for non-nl80211 wdevs. Additionally it wrongly includes ht frequency information for non-ht BSSes. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* rpcd: update to git HEADDaniel Golle2021-01-051-4/+4
| | | | | | | | | fd017ba iwinfo: add ht and vht operation info to wifi scan 4c66b31 iwinfo: export center channel for info ubus call e28d4a5 iwinfo: add support for 802.11ad and GCMP 5c15f57 iwinfo: return hwmode 'ad' on 802.11ad-only hardware Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* iwinfo: update to git HEADDaniel Golle2021-01-051-4/+4
| | | | | | | | | | a17f561 iwinfo: detect QCA IPQ4019 WiSoC from FDT ea28dfb iwinfo: export ht and vht operation in scan results 4e22953 iwinfo: export center_chan info for local wifi 74d13fb cli: account for additional digit for frequencies above 10GHz 8bfd8d8 iwinfo: add support for GCMP cipher Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: Add wil6210 driverRobert Marko2021-01-051-3/+15
| | | | | | | | | | This patch adds wil6210 driver for Wilocity/QCA based 802.11ad PCI cards. Driver uses cfg80211 and nl80211 but not mac80211. Integration for UCI and LuCI will come in other patches. Signed-off-by: Robert Marko <robimarko@gmail.com>
* linux-firmware: Add wil6210 firmwareRobert Marko2021-01-051-0/+8
| | | | | | | | This patch adds wil6210 firmware and board files. Firmware version is not up to date but is only freely redistributable one I found. Board file is a generic one so most devices and especially those for long distance PtP links will require so in a ipq-wifi like way. Signed-off-by: Robert Marko <robimarko@gmail.com>
* mac80211: add 802.11ad-supportGary Cooper2021-01-052-1/+7
| | | | | | This adds logic to properly populate defaults in /etc/config/wireless. Signed-off-by: Gary Cooper <gaco@bitmessage.de>
* hostapd: wpa_supplicant: Enable proper GCMP cipher supportRobert Marko2021-01-052-1/+6
| | | | | | | | | This patch enables hostapd.sh to properly configure wpa_supplicant for when GCMP is used as cipher in station mode. Without this wpa_supplicant will be unable to connect to AP. This is needed for wil6210 as it does not support CCMP. Signed-off-by: Robert Marko <robimarko@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 11:00:54 +0000