aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* adb: fix missing PKG_MIRROR_HASHChristian Lamparter2019-03-211-0/+1
| | | | | | This package was missing a PKG_MIRROR_HASH value. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ramips: Xiaomi MIR3G: detect board name from DTSOzgur Can Leonard2019-03-211-1/+1
| | | | | | | | | | | | | | | | - Former "mir3g" board name becomes "xiaomi,mir3g". - Reorder some entries to maintain alphabetical order. - Change DTS so status LEDs (yellow/red/blue) mimic Xiaomi stock firmware: (Section Indicator) <http://files.xiaomi-mi.co.uk/files/router_pro/router%20PRO%20EN.pdf> <http://files.xiaomi-mi.co.uk/files/Mi_WiFi_router_3/MiWiFi_router3_EN.pdf> |Yellow: Update (LED flickering), the launch of the system (steady light); |Blue: during normal operation (steady light); |Red: Safe mode (display flicker), system failure (steady light); Signed-off-by: Ozgur Can Leonard <ozgurcan@gmail.com> [Added link to similar Router 3 model] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ca-certificates: update to version 20190110Josef Schlehofer2019-03-211-4/+3
| | | | | | | | | | - Tested on Turris MOX, OpenWrt master - Removed PKG_BUILD_DIR In build_dir there were two folders ca-certificates and ca-certificates-20190110 and it failed as files were in ca-certificates-20190110 Signed-off-by: Josef Schlehofer <josef.schlehofer@nic.cz>
* ipq40xx: add support for EnGenius ENS620EXTSteve Glennon2019-03-212-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Qualcomm IPQ4018 RAM: 256M FLASH: 32M SPI NOR W25Q256 ETH: QCA8075 WiFi2: IPQ4018 2T2R 2SS b/g/n WiFi5: IPQ4018 2T2R 2SS n/ac LED: - Power amber - LAN1(PoE) green - LAN2 green - Wi-Fi 2.4GHz green - Wi-Fi 5GHz green BTN: - WPS UART: 115200n8 3.3V J1 VCC(1) - GND(2) - TX(3) - RX(4) Added basic support to get the device up and running for a sysupgrade image only. There is currently no way back to factory firmware, so this is a one-way street to OpenWRT. Install from factory condition is convoluted, and may brick your device: 1) Enable SSH and disable the CLI on the factory device from the web user interface (Management->Advanced) 2) Reboot the device 3) Override the default, limited SSH shell: a) Get into the ssh shell: ssh admin@192.168.1.1 /bin/sh --login b) Change the dropbear script to disable the limited shell. At the empty command prompt type: sed -i '/login_ssh/s/^/#/g’ dropbear /etc/init.d/dropbear restart exit 4) ssh in to a (now-) normal OpenWRT SSH session 5) Flash your built image a) scp openwrt-ipq40xx-engenius_ens620ext-squashfs-sysupgrade.bin admin@192.168.1.1:/tmp/ b) ssh admin@192.168.1.1 c) sysupgrade -n /tmp/openwrt-ipq40xx-engenius_ens620ext-squashfs-sysupgrade.bin 6) After flash completes (it may say "Upgrade failed" followed by "Upgrade completed") and device reboots, log in to newly flashed system. Note you will now need to ssh as root rather than admin. Signed-off-by: Steve Glennon <s.glennon@cablelabs.com> [whitespace fixes, reordered partitions, removed rng node from 4.14, fixed 901-arm-boot-add-dts-files.patch] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* iproute2: update to 5.0.0Deng Qingfang2019-03-207-50/+19
| | | | | | | | | Update iproute2 to 5.0.0 Remove upstream patch 001-tc-fix-undefined-XATTR_SIZE_MAX Alter patch 170-ip_tiny as support for IPX and DECnet is dropped Update patch 010-cake-fwmark to match upstream commit Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* mac80211: fix an issue with the TXQ scheduling API and powersave clientsFelix Fietkau2019-03-201-0/+31
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: improve the txq scheduling API to deal with driver buffered packetsFelix Fietkau2019-03-202-3/+108
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: optimize skb resizing to avoid reallocation when using 802.11s + ↵Felix Fietkau2019-03-201-0/+198
| | | | | | batman-adv Signed-off-by: Felix Fietkau <nbd@nbd.name>
* iproute2: add cake fwmark supportRyan Mounce2019-03-202-1/+156
| | | | Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
* kmod-sched-cake: bump to latest cakeRyan Mounce2019-03-191-3/+3
| | | | | | | | | | | | | | | | Update the out of tree build of cake. Applicable patches are also in net-next. 057c738 Fix fwmark_shft assignment (again) ca6c162 Add support for storing mark back into conntrack 7ed9b6c Fix off-by-one error when setting fwmark_shft. a4a243a sch_cake: Interpret fwmark parameter as a bitmask 29d707e Simplify logic in cake_select_tin() 8acaaee Permit use of connmarks as tin classifiers 348f186 Make the dual modes fairer 99a7297 compat: Don't lock root qdisc when dumping stats on old kernels Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
* usbutils: Update usb.ids to 0.321Daniel Engberg2019-03-181-3/+3
| | | | | | Update usb.ids to 0.321 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* ipset: size optimizationsDeng Qingfang2019-03-171-2/+5
| | | | | | | | | | | ipset utility was linked statically to libipset. Disable static library for dynamic linking to save space. Add -Wl,--gc-sections,--as-needed for further reduction MIPS ipk size: ipset: 29KiB -> 2KiB libipset: 39KiB -> 38KiB Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* mac80211: netifd: Use a mask when using `iw set antenna`Alexander Couzens2019-03-162-3/+6
| | | | | | | | The keyword "all" is only supported by `iw set antenna` if it's used as the only argument. Convert "all" into a mask before calling `iw set antenna`. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* mt76: update to the latest versionFelix Fietkau2019-03-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 00ac79d mt7603: fix initialization of max rx length 320af65 mt76: mt7603: use the correct hweight8() function bdee924 mt76: fix schedule while atomic in mt76x02_reset_state abcb544 mt76x02: do not enable RTS/CTS by default e97a209 mt76: remove mt76_queue dependency from tx_queue_skb function pointer ddd98f8 mt76: remove mt76_queue dependency from tx_prepare_skb function pointer 9bc2d56 mt76: remove mt76_queue dependency from tx_complete_skb function pointer 06c917f mt76: introduce mt76_sw_queue data structure 2dc63b0 mt76: introduce mt76_txq_id field in mt76_queue_entry 312f6fc mt76: remove irqsave/restore in locking for tx status fifo 0fe6386 mt76: move mt76x02_insert_hdr_pad in mt76-core module efe9a47 mt76: mmio: move mt76_insert_hdr_pad in mt76_dma_tx_queue_skb 0b03f87 mt76: move skb dma mapping before running tx_prepare_skb f977a92 mt76: introduce mt76_tx_info data structure 72fe286 mt76: use mac80211 txq scheduling b77b932 mt76: reduce locking in mt76_dma_tx_cleanup c0ab515 mt76: store wcid tx rate info in one u32 reduce locking f37ad72 mt76: mt76x02: store software PN/IV in wcid 5323005 mt76: move tx tasklet to struct mt76_dev 688d708 mt76: only schedule txqs from the tx tasklet 42ce040 mt76: use TX_NEEDS_ALIGNED4_SKBS 2660aa9 mt76: mt7603: store software PN/IV in wcid 3ce8a93 mt76: dma: add static qualifier to mt76_dma_tx_queue_skb 81a32aa mt7603: remove mt7603_mcu_init routine 48dc7e9 mt7603: core: do not use magic numbers in mt7603_reg_map 2236490 mt76: usb: reduce code indentation in mt76u_alloc_tx Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add a few performance improvement patchesFelix Fietkau2019-03-164-0/+297
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: improve locking around the txq scheduling / airtime fairness APIFelix Fietkau2019-03-161-0/+214
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport the txq scheduling / airtime fairness APIFelix Fietkau2019-03-169-59/+1147
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix an unaligned access in the mesh hash table functionFelix Fietkau2019-03-161-0/+21
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: add support for suppressing the DHCP request hostname by setting it to *Felix Fietkau2019-03-161-0/+2
| | | | | | | | | dnsmasq (and probably other DHCP servers as well) does not like to hand out leases with duplicate host names. Adding support for skipping the hostname makes it easier to deploy setups where it is not guaranteed to be unique Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: update and fix the patch to allow 4-byte aligned tx skbsFelix Fietkau2019-03-1614-300/+371
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: allocate tailroom for forwarded mesh packetsFelix Fietkau2019-03-161-0/+37
| | | | | | Fixes a warning + packet loss on encrypted mesh networks with forwarding Signed-off-by: Felix Fietkau <nbd@nbd.name>
* iproute2: tc: reduce size of dynamic symbol tableTony Ambardar2019-03-142-1/+45
| | | | | | | | | | | | | In the case of SHARED_LIBS=y, don't use -export-dynamic to place *all* symbols into the dynamic symbol table. Instead, use --dynamic-list to export a smaller set of symbols similar to that defined in static-syms.h in the case of SHARED_LIBS=n, avoiding an 11 KB tc package size increase. The symbol set is based on that required by the only plugin, m_xt.so. Also increment PKG_RELEASE. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE fixup]
* iproute2: tc: enable and fix support for using .so pluginsTony Ambardar2019-03-142-1/+107
| | | | | | | | | | | | | | | | | | | | | | | This enables using the tc module m_xt.so, which uses the act_ipt kernel module to allow tc actions based on iptables targets. e.g. tc filter add dev eth0 parent 1: prio 10 protocol ip \ u32 match u32 0 0 action xt -j DSCP --set-dscp-class BE Make the SHARED_LIBS parameter configurable and based on tc package selection. Fix a problem using the tc m_xt.so plugin as also described in https://bugs.debian.org/868059: Sync include/xtables.h from iptables to make sure the right offset is used when accessing structure members defined in libxtables. One could get “Extension does not know id …” otherwise. (See also: #868059) Patch to sync the included xtables.h with system iptables 1.6.x. This continues to work with iptables 1.8.2. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* iproute2: support eBFP/XDP object file loading, simplify linking libelfTony Ambardar2019-03-143-67/+30
| | | | | | | | | | | | | | Add build and runtime dependencies on libelf, allowing tc and ip-full to load BPF and XDP object files respectively. Define package 'tc' as a singleton package variant, which can be used to enable additional functionality limited only to tc. Also set ip-tiny as the default 'ip' variant. Preserve optionality of libelf by having configuration script follow the HAVE_ELF environment variable, used similarly to the HAVE_MNL variable. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* netifd: update to latest git HEAD (FS#2087)Hans Dedecker2019-03-141-3/+3
| | | | | | 81ac3bc interface-ip: fix delegate config update on reload (FS#2087) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uboot-sunxi: add fix for A20-OLinuXino-Lime2-eMMC rev. K boardsZoltan HERPAI2019-03-131-0/+44
| | | | | | | The OLinuXino Lime2 rev. K boards use new PHYs (Micrel KSZ9031), so enable that. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: bump to 2019.01Zoltan HERPAI2019-03-135-9/+9
| | | | | | | | | | | | | | Tested on: Bananapro (A20) Banana Pi M3 (A83t) Linksprite pcDuino3 (A20) Olinuxino Lime (A10) Orange Pi 2 (H3) Pine64 (A64) Patches refreshed. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ipq40xx: add support for AVM FRITZ!Repeater 3000David Bauer2019-03-133-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Qualcomm IPQ4019 RAM: 256M (NANYA NT5CC128M16JR-EK) FLASH: 128M NAND (Macronix MX30LF1G18AC-XKI) ETH: Qualcomm QCA8072 WiFi2: IPQ4019 2T2R 2SS b/g/n WiFi5: IPQ4019 2T2R 2SS n/ac WiFi5: QCA9984 4T4R 4SS n/ac LED: - Connect green/blue/red - Power green BTN: WPS/Connect UART: 115200n8 3.3V VCC - RX - TX - GND (Square is VCC) Installation ------------ 1. Grab the uboot for the Device from the 'u-boot-fritz3000' subdirectory. Place it in the same directory as the 'eva_ramboot.py' script. It is located in the 'scripts/flashing' subdirectory of the OpenWRT tree. 2. Assign yourself the IP address 192.168.178.10/24. Connect your Computer to one of the boxes LAN ports. 3. Connect Power to the Box. As soon as the LAN port of your computer shows link, load the U-Boot to the box using following command. > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz3000.bin 4. The U-Boot will now start. Now assign yourself the IP address 192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP server root directory and rename it to 'FRITZ3000.bin'. 5. The Box will now boot OpenWRT from RAM. This can take up to two minutes. 6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using scp. SSH into the Box and first write the Bootloader to both previous kernel partitions. > mtd write /path/to/uboot-fritz3000.bin uboot0 > mtd write /path/to/uboot-fritz3000.bin uboot1 7. Remove the AVM filesystem partitions to make room for our kernel + rootfs + overlayfs. > ubirmvol /dev/ubi0 --name=avm_filesys_0 > ubirmvol /dev/ubi0 --name=avm_filesys_1 8. Flash OpenWRT peristently using sysupgrade. > sysupgrade -n /path/to/openwrt-sysupgrade.bin Signed-off-by: David Bauer <mail@david-bauer.net>
* fritz-tools: add support for IPQ40xx platformDavid Bauer2019-03-131-2/+10
| | | | | | | | AVM devices based on Qualcomm IPQ40xx do not store sector health information in the OOB area. Make this check optional to support this platform. Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-fritz4040: bump version to 2019-03-03David Bauer2019-03-131-3/+3
| | | | | | Adds support for the AVM FRITZ!Repeater 3000 Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: add support for Xiaomi Mi Router 3 ProOzgur Can Leonard2019-03-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware: CPU: MediaTek MT7621AT (2x880MHz) RAM: 512MB DDR3 FLASH: 256MB NAND WiFi: 2.4GHz 4x4 MT7615 b/g/n (Needs driver, See Issues!) WiFI: 5GHz 4x4 MT7615 a/n/ac (Needs driver, See Issues!) USB: 1x 3.0 ETH: 1x WAN 10/100/1000 3x LAN 10/100/1000 LED: Power/Status BTN: RESET UART: 115200 8n1 Partition layout and boot: Stock Xiaomi firmware has the MTD split into (among others) - kernel0 (@0x200000) - kernel1 (@0x600000) - rootfs0 - rootfs1 - overlay (ubi) Xiaomi uboot expects to find kernels at 0x200000 & 0x600000 referred to as system 1 & system 2 respectively. a kernel is considered suitable for handing control over if its linux magic number exists & uImage CRC are correct. If either of those conditions fail, a matching sys'n'_fail flag is set in uboot env & a restart performed in the hope that the alternate kernel is okay. If neither kernel checksums ok and both are marked failed, system 2 is booted anyway. Note uboot's tftp flash install writes the transferred image to both kernel partitions. Installation: Similar to the Xiaomi MIR3G, we keep stock Xiaomi firmware in kernel0 for ease of recovery, and install OpenWRT into kernel1 and after. The installation file for OpenWRT is a *squashfs-factory.bin file that contains the kernel and a ubi partition. This is flashed as follows: nvram set flag_try_sys1_failed=1 nvram set flag_try_sys2_failed=0 nvram commit dd if=factory.bin bs=1M count=4 | mtd write - kernel1 dd if=factory.bin bs=1M skip=4 | mtd write - rootfs0 reboot Reverting to stock: The part of stock firmware we've kept in kernel0 allows us to run stock recovery, which will re-flash stock firmware from a *.bin file on a USB. For this we do the following: fw_setenv flag_try_sys1_failed 0 fw_setenv flag_try_sys2_failed 1 reboot After reboot the LED status light will blink red, at which point pressing the 'reset' button will cause stock firmware to be installed from USB. Issues: OpenWRT currently does not have support for the MT7615 wifi chips. There is ongoing work to add mt7615 support to the open source mt76 driver. Until that support is in place, there are closed-source kernel modules that can be used. See: https://forum.openwrt.org/t/support-for-xiaomi-wifi-r3p-pro/20290/170 Signed-off-by: Ozgur Can Leonard <ozgurcan@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [02_network remaps, Added link to notes]
* ath79: add support for LibreRouter v1Santiago Piccinini2019-03-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SOC: QCA9558 RAM: 128M DDR2 Flash: 16MiB SPI-NOR ETH: QCA8337N: 2x 10/100/1000 PoE and PoE pass-through WiFi2: QCA9558 (bgn) 2T2R WiFi5: 2x mPCIE with AR9582 (an) 2T2R BTN: 1x Reset GPIO: multiple GPIO on header, PoE passthrough enable UART: 3.3V 115200 8N1 header on the board WDG: ATTiny13 watchdog JTAG: header on the board USB: 1x connector and 1x header on the board PoE: 10-32V input in ETH port 1, passthrough in port 2 mPCIE: 2x populated with radios (but replaceable) OpenWrt is preinstalled from factory. To install use <your-image>-sysupgade.bin using the web interface or with sysupgrade -n. Flash from bootloader (in case failsafe does not work) 1. Connect the LibreRouter with a serial adapter (TTL voltage) to the UART header in the board. 2. Connect an ETH cable and configure static ip addres 192.168.1.10/24 3. Turn on the device and stop the bootloader sending any key through the serial interface. 4. Use a TFTP server to serve <your image>-sysupgrade.bin file. 5. Execute the following commands at the bootloader prompt: ath> tftp 82000000 <your image>-sysupgrade.bin ath> erase 0x9f050000 +$filesize ath> cp.b 0x82000000 0x9f050000 $filesize ath> bootm 0x9f050000 More docs * Bootloader https://github.com/librerouterorg/u-boot * Board details (schematics, gerbers): https://github.com/librerouterorg/board Signed-off-by: Santiago Piccinini <spiccinini@altermundi.net>
* openssl: disable digests by default, misc fixesEneas U de Queiroz2019-03-124-2/+79
| | | | | | | | | | | | | | | | | | | | | | Openssh uses digest contexts across forks, which is not supported by the /dev/crypto engine. The speed of digests is usually not worth enabling them anyway. This changes the default of the DIGESTS option to NONE, so the user still has the option to enable them. Added another patch related to the use of encryption contexts across forks, that ignores a failure to close a previous open session when reinitializing a context, instead of failing the reinitialization. Added a link to the Cryptographic Hardware Accelerators document to the engine pacakges description, to provide more detailed instructions to configure the engines. Revert the removal of the OPENSSL_ENGINE_CRYPTO symbol, currently used by openssh. There is an open PR to update openssh; when merged, this symbol can be safely removed. Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [refresh patches]
* mac80211: rt2x00: import and update pending patchesDaniel Golle2019-03-1212-5/+192
| | | | | | | | | | | Imported from patchwork, patches marked with '=' have already been in our tree: [v3,1/4] cfg80211: add ratelimited variants of err and warn [v3,2/4] rt2x00: use ratelimited variants dev_warn/dev_err [v3,3/4] rt2x00: check number of EPROTO errors =[v3,4/4] rt2x00: do not print error when queue is full Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: Enable seccomp for powerpcWojciech Dubowik2019-03-111-4/+4
| | | | Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
* uboot-envtools: ramips: add support for ALFA Network Tube-E4GPiotr Dymacz2019-03-111-1/+2
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* busybox: add missing install dirHans Dedecker2019-03-111-1/+2
| | | | | | | | Add missing /usr/sbin install dir fixing : install: cannot create regular file 'build_dir/target-x86_64_musl/busybox-1.30.1/.pkgdir/busybox/usr/sbin/ntpd-hotplug': No such file or directory Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* nghttp2: bump to 1.37.0Hans Dedecker2019-03-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | cfb47d30 Take into account larger frame size for prioritization dbbe4e01 Remove unused field 371bc3a8 clang-format 5e7889c5 Update manual pages b1b2ad50 Bump up version number to 1.37.0, LT revision to 31:2:17 e043ca83 Update AUTHORS c2434dfb Simplify stream_less 816ad210 Reuse name when indexing header by referencing dynamic table f5feb16e Merge pull request #1295 from bratkartoffel/fix-compile-boringssl adf09f21 Merge pull request #1303 from donny-dont/fix-shared-install 2591960e Explicitly set install location when building shared libs d93842db nghttpx: Fix backend stall if header and request body are sent in 2 packets 8dc2b263 nghttpx: Use std::priority_queue 8d842701 Update manual pages de85b0fd Update README 5d6beed5 Merge branch 'nghttpx-backend-weight' 1ff9de4c nghttpx: Backend address selection with weight 34482ed4 Fix compilation with boringssl 9b6ced66 Bump up version number to 1.37.0-DEV Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* linux-atm: Fix compile problem with kernel 4.20Hauke Mehrtens2019-03-101-0/+52
| | | | | | | | | | | | | | | | This fixes the following compile problem with kernel 4.20: In file included from arp.c:20:0: include/linux/if_arp.h:121:16: error: 'IFNAMSIZ' undeclared here (not in a function) char arp_dev[IFNAMSIZ]; ^~~~~~~~ make[7]: *** [Makefile:459: arp.o] Error 1 This is caused by commit 6a12709da354 ("net: if_arp: use define instead of hard-coded value") in the upstream Linux kernel which is integrated in Linux 4.20. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* wolfssl: fix build in busybox environmentsMoritz Warning2019-03-102-2/+25
| | | | | | The configure script broke when used in alpine-3.9 based docker containers. Fixed in wolfSSL >3.15.7. Signed-off-by: Moritz Warning <moritzwarning@web.de>
* ltq-atm/ltq-ptm: re-enable/fix reset_ppe() functionality for VR9Martin Schiller2019-03-1014-65/+181
| | | | | | | | | | | | | | | This patch re-enables the reset_ppe() functionality for VR9 targets by using the new lantiq rcu subsystem. The reset sequence in the reset_ppe() function was taken from the ppa datapath driver of lantiq UGW 7.4.1. Additionally it adds the required reset definitions to the vr9 dtsi file. It also prepares the reset_ppe() function calls for the other lantiq targets. This feature is needed to be able to switch between ltq-atm/ltq-ptm driver in ATM/PTM Auto-Mode at runtime. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* fritz-tools: add fritz_tffs_nand_read toolAndy Binder2019-03-103-1/+581
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A tool for reading the TFFS partitions (a name-value storage usually found in AVM Fritz!Box based devices) on nand flash. Copyright (c) 2018 Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.DE> Based on the fritz_tffs_read tool: Copyright (c) 2015-2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com> and on the TFFS 2.0 kernel driver from AVM: Copyright (c) 2004-2007 AVM GmbH <fritzbox_info@avm.de> and the TFFS 3.0 kernel driver from AVM: Copyright (C) 2004-2014 AVM GmbH <fritzbox_info@avm.de> and the OpenWrt TFFS kernel driver: Copyright (c) 2013 John Crispin <blogic@openwrt.org> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.de> Signed-off-by: Andy Binder <AndyBinder@gmx.de>
* sunxi: add support for Orange Pi PC PlusAleksander Jan Bajkowski2019-03-091-0/+7
| | | | | | | | | | | | | | | | | CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.2 Ghz GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0) Memory: 1GB DDR3 (shared with GPU) Onboard: Storage TF card (Max. 64GB) / MMC card slot Onboard: Storage 8 GB eMMC Onboard: Network 10/100M Ethernet RJ45 Onboard: Network WiFi 802.11 b/g/n (Realtek RTL8189FTV) Onboard header: SPI, I2C, GPIO, UART USB 2.0: Three USB 2.0 HOST, One USB 2.0 OTG Known issues: -Wifi diesn't work Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* openssl: backport devcrypto changes from masterEneas U de Queiroz2019-03-099-25/+3678
| | | | | | | | | | | | | | | | | | | The patches to the /dev/crypto engine were commited to openssl master, and will be in the next major version (3.0). Changes: - Optimization in computing a digest in one operation, saving an ioctl - Runtime configuration options for the choice of algorithms to use - Command to dump useful information about the algorithms supported by the engine and the system. - Build the devcrypto engine as a dynamic module, like other engines. The devcrypto engine is built as a separate package by default, but options were added to allow building the engines into the main library. Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com> [refresh patches] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* 6to4: update OpenWrt documentation URLVieno Hakkerinen2019-03-091-1/+1
| | | | Signed-off-by: Vieno Hakkerinen <txt.file@txtfile.eu>
* uboot-envtools: ath79: add support for YunCore A770Piotr Dymacz2019-03-091-1/+2
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ipq-wifi: update ALFA Network AP120C-AC board-2.binPiotr Dymacz2019-03-081-0/+0
| | | | | | | Add specific 'variant' for 'bus=ahb,bmi-chip-id=0,bmi-board-id=25' BDF. Use the same value ('ALFA-Network-AP120C-AC') as sent upstream. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ucert: add PROVIDES also for minimal 'ucert' packageDaniel Golle2019-03-081-0/+1
| | | | | | | Otherwise ucert-full gets selected instead of ucert when depending on ucert. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mt76: update to the latest versionFelix Fietkau2019-03-071-3/+3
| | | | | | | | 1d7760d mt76: mt7603: set moredata flag when queueing ps-filtered packets 0b927b2 mt76: fix return value check in mt76_wmac_probe() e72376d mt76x02: fix hdr pointer in write txwi for USB Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: limit available channels via DTDavid Bauer2019-03-061-0/+39
| | | | | | | | | | | | | | | This backports upstream commit 34d5629 ath10k: limit available channels via DT ieee80211-freq-limit to the 4.19 ath10k-ct version. Without this patch, disabled channels are still listed as a supported configuration for the radio. The identical patch was also backported by OpenWRT to the non-ct driver. It can be dropped as soon as we switch to an ath10k-ct version based on 4.20 or higher. Signed-off-by: David Bauer <mail@david-bauer.net>