aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* mtd: base-files: Unify dual-firmware devices (Linksys)Jeff Kletsky2019-05-183-134/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Consistently handle boot-count reset and upgrade across ipq40xx, ipq806x, kirkwood, mvebu Dual-firmware devices often utilize a specific MTD partition to record the number of times the boot loader has initiated boot. Most of these devices are NAND, typically with a 2k erase size. When this code was ported to the ipq40xx platform, the device in hand used NOR for this partition, with a 16-byte "record" size. As the implementation of `mtd resetbc` is by-platform, the hard-coded nature of this change prevented proper operation of a NAND-based device. * Unified the "NOR" variant with the rest of the Linksys variants * Added logging to indicate success and failure * Provided a meaningful return value for scripting * "Protected" the use of `mtd resetbc` in start-up scripts so that failure does not end the boot sequence * Moved Linksys-specific actions into common `/etc/init.d/bootcount` For upgrade, these devices need to determine which partition to flash, as well as set certain U-Boot envirnment variables to change the next boot to the newly flashed version. * Moved upgrade-related environment changes out of bootcount * Combined multiple flashes of environment into single one * Current-partition detection now handles absence of `boot_part` Runtime-tested: Linksys EA8300 Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [checkpatch.pl fixes, traded split strings for 80+ chars per line]
* firmware/ipq-wifi: Extend for multi-chip boardsJeff Kletsky2019-05-183-19/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This package provides board-specific reference ("cal") data on an interim basis until included in the upstream distros While originally conceived for IPQ4019-based boards, similar needs are appearing with three-radio devices. For some of these devices, both a board-2.bin file needs to be supplied both for the IPQ4019 as well as for the other radio on the board. This patch allows new or multiple overrides to be specified by: * Adding board name to ALLWIFIBOARDS * Placing file(s) in this directory named as board-<devicename>.<qca4019|qca9888|qca9984> * Adding $(eval $(call generate-ipq-wifi-package,<device>,<display name>)) (along with suitable package selection for the board) At this time, QCA4019, QCA9888, and QCA9984 are supported. Extension to other chips should be straightforward. The existing files, board-*.bin, are "grandfathered" as QCA4019. The package name has been retained for compatability reasons. At this time it DEPENDS:=@TARGET_ipq40xx, limiting its visibility. Build-tested-on: asus_map-ac2200, alfa-network_ap120c-ac, avm_fritzbox-7530, avm_fritzrepeater-3000, engenius_eap1300, engenius_ens620ext, linksys_ea6350v3, qxwlan-e2600ac-c1/-c2 Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
* netifd: update to latest git HEADHans Dedecker2019-05-181-3/+3
| | | | | | | 22e8e58 interface-ip: use ptp address as well to find local address target f1aa0f9 treewide: pass bool as second argument of blobmsg_check_attr Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* libbsd: Fix compilation under ARCRosen Penev2019-05-172-1/+31
| | | | | | | | The 8 year old file does not have any ARC definitions. Signed-off-by: Rosen Penev <rosenp@gmail.com> [updated content of the patch with version sent to upstream] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* system: uci: Use config dir on uci_add and support add_/del_listKristian Evensen2019-05-172-2/+20
| | | | | | | | | | | | | | | | This commit makes three changes to the uci shell library: * A check for UCI_CONFIG_DIR has been added to the command line when adding anonymous sections. Without this change, adding anonymous sections to configs not stored in /etc/config is not possible. * Support for adding/removing items from lists were missing, so I have added the functions uci_add_list() and uci_remove_list() to simplify working with uci lists from scripts. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> [added missing package version bump] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* zlib: Use relative paths in pkg-config metadata fileJeffery To2019-05-172-1/+15
| | | | | | | | | | | | | | The buildroot pkg-config (in staging_dir/host/bin) overrides the prefix and exec_prefix variables in *.pc files, to supply the correct (buildroot) paths for callers. If other variables are not defined relative to prefix and exec_prefix, then the returned values will be incorrect. The default zlib.pc file generated by cmake contains absolute paths. This patches the file to use relative paths (relative to ${prefix} and ${exec_prefix}). Signed-off-by: Jeffery To <jeffery.to@gmail.com>
* odhcpd: update to latest git HEAD (FS#2242)Hans Dedecker2019-05-171-3/+3
| | | | | | | | | | | | | | | | | | 41a74cb config: remove 'ignore' config option c0c8034 treewide: init assignment lists head f98b7ee config: use list safe iterator in lease_delete 3c9810b dhcpv4: fix lease ordering by ip address b60c384 config: use multi-stage parsing of uci sections a2dd8d6 treewide: always init interface list heads during initialization a17665e dhcpv4: do not allow pool end address to overlap with broadcast address 6b951c5 treewide: give file descriptors safe initial value 39e11ed dhcpv4: DHCP pool size is off-by-one 4a600ce dhcpv4: add support for Parameter Request List option 55 09e5eca dhcpv4: fix DHCP packet size 3cd4876 ndp: fix syslog flooding (FS#2242) 79fbba1 config: set default loglevel to LOG_WARNING Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* tegra: add vendor string to device nameTomasz Maciej Nowak2019-05-151-1/+1
| | | | | | | for better identification. Also create SUPPORTED_DEVICES string from it which corresponds to dts compatible string. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* nftables: Fix compilation with uClibc-ngRosen Penev2019-05-152-1/+29
| | | | | | | | Missing header for va_list. Signed-off-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> [updated with upstream version of the patch]
* linux-firmware: update to 20190416Deng Qingfang2019-05-141-5/+4
| | | | | | | | | | | | | | | | | Update linux-firmware to 20190416, which includes updated firmwares e.g. for ath10k Also switch to official tarball source. The following firmware files we use are updated in this change: ath10k/QCA6174/hw3.0/board-2.bin ath10k/QCA9888/hw2.0/firmware-5.bin ath10k/QCA988X/hw2.0/firmware-5.bin ath10k/QCA9984/hw1.0/firmware-5.bin mrvl/sd8887_uapsta.bin mrvl/pcie8897_uapsta.bin iwlwifi-8000C-36.ucode iwlwifi-8265-36.ucode Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* valgrind: Add support for ARM64 architectureHauke Mehrtens2019-05-141-1/+1
| | | | | | valgrind also works on the ARM64 architecture, build it also for such CPUs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* valgrind: Update to version 3.15.0Hauke Mehrtens2019-05-141-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* strace: Update to version 5.0Hauke Mehrtens2019-05-143-98/+7
| | | | | | The removed patch was merged upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* iperf: Update to version 2.0.13Hauke Mehrtens2019-05-144-216/+10
| | | | | | The removed patches are already integrated in the upstream version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ppp: update to version 2.4.7.git-2019-05-06Hans Dedecker2019-05-138-32/+32
| | | | | | | fcb076c Various fixes for errors found by coverity static analysis (#109) d98ab38 Merge branch 'pppd_print_changes' of https://github.com/nlhintz/ppp into nlhintz-pppd_print_changes Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mvebu: use device-tree board detectionTomasz Maciej Nowak2019-05-111-13/+13
| | | | | | | | Convert whole target to Device Tree based board detection instead of identifying devices by dts file name. With this we can drop mvebu.sh translation script and rely on common method for model detection. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* mvebu: align device names to vendor_device formatTomasz Maciej Nowak2019-05-111-1/+1
| | | | | | | | | | Add vendors in device names and also rename few device names, for easier identyfying potential firmware to flash. The vendor and device string is mainly derived from model/compatipble string in dts from particular device, but since not all devices are well described, some of the renames follow marketing names. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* uClibc++: Update to 0.2.5Rosen Penev2019-05-1113-291/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switched to xz archives for smaller size. Removed upstreamed patches. Reorganized Makefile a little bit for clarity. Build/Prepare is not useful anymore. Upstream converted the file to LF. Refreshed config. Removed -ansi option from the original CFLAGS as this was causing long long support to be missing. Removed fPIC. We have the macro $(FPIC) already used. No point in setting fpic and fPIC together. Removed pedantic -Wlong-long warnings as they are not useful. Removed -std=gnu++98. Not only is it unnecessary (it compiles against all standards), it actually results in a size increase. 75843 vs. 75222 (gcc in OpenWrt defaults to g++14). Added --gc-sections to linker flags to reduce size: 72653 vs 75222. Removed warn linker options. They have been upstreamed. Tested on Archer C7v2 and GnuBee PC1. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* xfsprogs: Replace valloc with posix_memalignRosen Penev2019-05-112-1/+32
| | | | | | Fixes compilation under uClibc-ng. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* utils/spidev_test: build package directly from LinuxChristian Lamparter2019-05-112-321/+23
| | | | | | | | | | | | | | Jeff Kletsky noted in his patch titled: "utils/spidev_test: Update to current source from upstream Linux" that the spidev_test utility OpenWrt ships is severly out of date. Instead of updating the spidev_test.c from the current kernel, this patch replaces the package building code to utilize the very file that gets shipped with the kernel we compiling for anyway much like the "perf" package already does. Reported-by: Jeff Kletsky <git-commits@allycomm.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* lldpd: add option to edit hostnameLucian Cristian2019-05-112-0/+5
| | | | | | | also fixes the annoying repeating syslog lldp[]: unable to get system name Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* lldpd: update to 1.0.3Lucian Cristian2019-05-112-11/+25
| | | | | | Support for CDP PD PoE Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* ath10k-ct: Update to current versionRobert Marko2019-05-1111-48/+48
| | | | | | | | | | | | | This patch updates ath10k-ct to current version. Changes are: ath10k-ct: Fix printing PN in peer stats. Previous logic was incorrect. Also add set-special API to enable returning PN. Patches refreshed and tested on 8devices Jalapeno dev board(IPQ4019) Signed-off-by: Robert Marko <robimarko@gmail.com>
* ath10k-firmware: update Candela Tech firmware imagesRobert Marko2019-05-111-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Release notes since last time: Release notes for wave-1: 2019-04-02: Support some get/set API for eeprom rate power tables. Mostly backported from 10.2 2019-04-02: Support adaptive-CCA, backported from 10.2 2019-04-02: Support adding eeprom configAddr pairs via the set-special API. These configAddrs can be used to change the default register settings for up to 12 registers. 2019-05-03: Fix tx-power settings for 2x2, 3x3 rates. Original logic I put in back in 2016 set 2x2 and 3x3 lower than the needed to be when using most NICs (very high powered NICs would not have been affected I think, not sure any of those exist though.) This improves throughput for 2x2 and 3x3 devices, especially when the signal is weaker. Release notes for wave-2: 2019-04-08: When setting keys, if high bit of high value of key_rsc_counter is set to 0x1, then the lower 48 bits will be used as the PN value. By default, PN is set to 1 each time the key is set. 2019-04-08: Pack PN into un-used 'excretries' aka 'num_pkt_loss_excess_retry' high 16 bits. This lets us report peer PN, but *only* if driver has previously set a PN when setting key (or set-special cmd is used to enable PN reporting). This is done so that we know the driver is recent enough to deal with the PN stat reporting. 2019-04-16: Support specifying tx rate on a per-beacon packet. See ath10k_wmi_op_gen_beacon_dma and ath10k_convert_hw_rate_to_rate_info for API details. Driver needs additional work to actually enable this feature currently. 2019-04-30: Compile out tx-prefetch caching logic. It is full of tricky bugs that cause tx hangs. I fixed at least one, but more remain and I have wasted too much time on this already. 2019-05-08: Start rate-ctrl at mcs-3 instead of mcs-5. This significantly helps DHCP happen quickly, probably because the initial rate being too high would take a while to ramp down, especially since there are few packets sent by the time DHCP needs to start. This bug was triggered by me decreasing retries of 0x1e (upstream default) to 0x4. But, I think it is better to start with lower initial MCS instead of always having a very high retry count. Tested on 8devices Jalapeno dev board(IPQ4019) Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [neatify]
* base-files: improve lib/upgrade/common.shKlaus Kudielka2019-05-111-13/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently, upgrade device autodetection has been added to the mvebu target. This exposes some shortcomings of the generic export_bootdevice function, e.g. on the Turris Omnia: export_bootdevice silently reports the root partition to be the boot device. This makes the sysupgrade process fail at several places. Fix this by clearly distinguishing between /proc/cmdline arguments which specify the boot disk, and those which specify the root partition. Only in the latter case, strip off the partition, and do it consistently. root=PARTUUID=<pseudo PARTUUID for MBR> (any partition) and root=/dev/* (any partition) are accepted. The root of the problem is that the *existing* export_bootdevice in /lib/upgrade/common.sh behaves differently, if the kernel is booted with root=/dev/..., or if it is booted with root=PARTUUID=... In the former case, it reports back major/minor of the root partition, in the latter case it reports back major/minor of the complete boot disk. Targets, which boot with root=/dev/... *and* use export_bootdevice / export_partdevice, have added workarounds to this behaviour, by specifying *negative* increments to the export_partdevice function. Consequently, those targets have to be adapted to use positive increments, otherwise they are broken by the change to export_bootdevice. Fixes: 4e8345ff68 ("mvebu: base-files: autodetect upgrade device") Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com> Tested-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* ramips: mt7620: fix dependenciesDeng Qingfang2019-05-111-7/+7
| | | | | | | | | | | | | MT7620 integrated WMAC does not need RT2x00 PCI driver or firmware Also corrected kmod-eeprom-93cx6 and kmod-lib-crc-itu-t dependencies according to original Kconfig and lsmod output This will remove some unnecessary packages from MT7620 target to save some space Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [75 characters per line in the commit message]
* procd: fix compile issueHans Dedecker2019-05-091-3/+3
| | | | | | 1361b97 container: include stdbool.h Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* netifd: update to latest git HEADHans Dedecker2019-05-081-3/+3
| | | | | | | f6fb700 interface-ip: fine tune IPv6 mtu warning 975a5c4 interface: tidy ipv6 mtu warning Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* procd: update to latest git HEADHans Dedecker2019-05-081-4/+4
| | | | | | 9b35439 procd: detect lxc container and behave accordingly Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* elfutils: Fix compile with uClibc-ngRosen Penev2019-05-052-1/+39
| | | | | | | | Probably glibc too. argp_help takes a char *. not const char *. Signed-off-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> [updated with upstream version of the patch]
* uboot-tegra: bump to 2019.04Tomasz Maciej Nowak2019-05-051-2/+2
| | | | | | | This version has important change for tegra boards which is reserving 32MB memory for Linux kernel instead of current 16MB. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* base-files: add service_stopped as a post stop hookArthur Skowronek2019-05-051-0/+3
| | | | | | | | | | | | | | | | | | | | Purpose of these changes is to introduce a hook for post service shutdown in a similar fashion to the existing hook service_started. I found it to be useful to specify a hook that is called once the service has been stopped and not before the service is stopped like the stop_service hook does. The concrete use case I have for this is that I'm running a binary that takes over the hardware watchdog timer. Said binary unfortunately can not use ubus directly to tell procd to hand over the watchdog timer so this has to be done in the service file for the binary in question. In order to support a clean handover of the watchdog timer back to procd, the service init script has to dispatch the ubus invocation once the binary in question has been stopped. Signed-off-by: Arthur Skowronek <ags@digineo.de> Signed-off-by: Petr Štetiar <ynezz@true.cz> [added commit message, use the same form as other hooks]
* kernel: Remove support for kernel 3.18Hauke Mehrtens2019-05-0327-296/+41
| | | | | | | | | | No target is using kernel 3.18 anymore, remove all the generic support for kernel 3.18. The removed packages are depending on kernel 3.18 only and are not used on any recent kernel. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* xburst: Remove unmaintained targetHauke Mehrtens2019-05-037-4669/+0
| | | | | | | | | | | | This target only supports kernel 3.18, which is not supported in OpenWrt any more for multiple releases. It also looks like there is no active maintainer for this target. Remove the code and all the packages which are only used by this target. To add this target to OpenWrt again port it to a recent and supported kernel version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* omap24xx: Remove unmaintained targetHauke Mehrtens2019-05-032-26/+2
| | | | | | | | | | | | This target only supports kernel 4.1, which is not supported in OpenWrt any more for multiple releases. It also looks like there is no active maintainer for this target. Remove the code and all the packages which are only used by this target. To add this target to OpenWrt again port it to a recent and supported kernel version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* au1000: Remove unmaintained targetHauke Mehrtens2019-05-032-52/+0
| | | | | | | | | | | | This target only supports kernel 3.18, which is not supported in OpenWrt any more for multiple releases. It also looks like there is no active maintainer for this target. Remove the code and all the packages which are only used by this target. To add this target to OpenWrt again port it to a recent and supported kernel version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* adm5120: Remove unmaintained targetHauke Mehrtens2019-05-036-177/+1
| | | | | | | | | | | | This target only supports kernel 3.18, which is not supported in OpenWrt any more for multiple releases. It also looks like there is no active maintainer for this target. Remove the code and all the packages which are only used by this target. To add this target to OpenWrt again port it to a recent and supported kernel version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* procd: add procd_running() helper for checking running stateRafał Miłecki2019-05-022-1/+16
| | | | | | | | This should be helpful for implementing service_running() in procd init scripts. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: John Crispin <john@phrozen.org>
* procd: update to latest git HEADHans Dedecker2019-05-021-2/+2
| | | | | | 01f3dc8 instance: dump user and group as well Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* procd: allow passing optional group instance parameterMichael Heimpold2019-05-022-4/+5
| | | | | | | | | Sometimes is desirable to run a process with a specific group id instead of the default one which is derived from passwd entry. This can be achived now by using procd_set_param group $mygroup. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_SOURCE_VERSION update]
* procd: allow passing optional syslog facility as instance parameterMichael Heimpold2019-05-022-5/+8
| | | | | | | | | Optional syslog facility can be set by adding procd_set_param facility $myfacility. While at, also add stdout/stderr documentation. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_SOURCE_VERSION update]
* kernel: iio: Fix BMP280 Auto probingRobert Marko2019-05-021-2/+2
| | | | | | | | Currently Auto probing for BMP/BME280 does not work because kernel module name in the call is not correct. Package name was used instead of kernel module name. Signed-off-by: Robert Marko <robimarko@gmail.com>
* libroxml: bump to the 3.0.1 versionRafał Miłecki2019-05-011-5/+5
| | | | | | | | | | | | Some of changes: * Support for local-name() * General refactoring * Better parsing performance * Fix possible buffer overflow & memleak * Validation checks * More commit functions (file, buffer, fd) Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* procd: update to latest git HEADHans Dedecker2019-04-291-3/+3
| | | | | | | cfaed56 procd: add SIGPWR as signal a30a8fd procd: copy the respawn property of new instance Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mac80211: rt2x00: replace patches with upstream versionDaniel Golle2019-04-2922-1203/+959
| | | | | | | | | | Support for RT3883/RT3663 was merged upstream [1]. Use that patch instead of our original series. The resulting source tree is exactly identical, this commit is merely reorganizing the patches. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git/commit/?id=d0e61a0f7cca51ce340a5a73595189972122ff25 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* openssl: build kmods only if engines are selectedEneas U de Queiroz2019-04-261-4/+4
| | | | | | | | | | Add a conditional to the individual package's for the kmods in DEPENDS. This avoids the need to compile the kernel modules when the crypto engine packages are not selected. The final binares are not affected by this. Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com> Tested-by: Rosen Penev <rosenp@gmail.com>
* elfutils: bump to 0.176Jose Olivera2019-04-262-4/+4
| | | | | | | | | | | | | | | | *Fixes: -CVE-2019-7150 -CVE-2019-7149 -CVE-2019-7146 -CVE-2019-7665 -CVE-2019-7664 -CVE-2019-7148 *Refresh 003-libintl-compatibility.patch *Also reset PKG_RELEASE. Signed-off-by: Jose Olivera <oliverajeo@gmail.com>
* mac80211: fix regression in skb resizing optimization in monitor mode (FS#2254)Felix Fietkau2019-04-241-21/+21
| | | | | | | struct ieee80211_local needs to be passed in separately instead of dereferencing the (potentially NULL) sdata Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: Update to 2019-04-08Koen Vandeputte2019-04-231-3/+3
| | | | | | | | | | | | | | | | 9cd701a4f028 ath10k-ct: Add PN get/set API for wave-2 firmware. 5c8a4668323b ath10k-ct: Support over-riding the power ctl table in eeprom 75e2705f31bb ath10k-ct: CCA, eeprom, other changes. a696e602a0fc ath10k-ct: Attempt to fix-out-of-tree compile for 4.16 a2aec62262df ath10k: Improve beacon tx status for 4.20 kernel. be5c21a82b15 ath10k-ct: Fix out-of-tree compile for 4.20, pull in stable changes for 4.19 Fixes compile errors when using the 4.20 flavour. Also the amount of beacon errors seems to have dropped. Tested on a Mikrotik RB912UAGS-5HPacD Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* Revert "uhttpd: disable concurrent requests by default"Jo-Philipp Wich2019-04-232-2/+2
| | | | | | | | | | This reverts commit c6aa9ff38870a30dbe6da17e4edad6039fe10ddf. Further testing has revealed that we will need to allow concurrent requests after all, especially for situations where CGI processes initiate further HTTP requests to the local host. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-29 18:44:23 +0000