aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* nvram: refuse to open NVRAM for writing if it's too big to be handledRafał Miłecki2015-04-221-2/+2
| | | | | | | | Otherwise writing anything will result in loosing data. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45565
* nvram: drop check for WGT634U using /proc/diag/modelRafał Miłecki2015-04-221-11/+1
| | | | | | | | | We don't have broadcom-diag for months or years now and the correct solution is to simply don't have "nvram" partition on WGT634U anyway. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45564
* nvram: use correct variable name for MTD partition sizeRafał Miłecki2015-04-221-13/+14
| | | | | | | | | | Sytax of /proc/mtd is following: dev: size erasesize name which means that sscanf "mtd%d: %08x" reads size, not erasesize. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45563
* nvram: drop support for ancient /dev/mtdblock/%dRafał Miłecki2015-04-221-13/+1
| | | | | | | | Path /dev/mtdblock%d is used for years now. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45562
* hostapd: mark wpa-supplicant & wpad-mesh as broken on umlNicolas Thill2015-04-221-2/+2
| | | | | | Signed-off-by: Nicolas Thill <nico@openwrt.org> SVN-Revision: 45561
* mwlwifi: upgrade to the latest revisionImre Kaloz2015-04-221-2/+2
| | | | | | | | New revision adds transmit frame rate info Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 45560
* uqmi: auto retry when bringup failsJohn Crispin2015-04-211-1/+15
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45556
* umbim: auto retry when bringup failsJohn Crispin2015-04-211-1/+15
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45555
* netifd: update to the latest version, fixes retry when proto handlers exit ↵Felix Fietkau2015-04-211-2/+2
| | | | | | | | without changing the state Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45550
* mt76: remove specific firmware versions from makefileFelix Fietkau2015-04-211-3/+5
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45549
* odhcpd: minor fixesSteven Barth2015-04-211-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45539
* kernel: remove module checks for 3.15/3.16/3.17John Crispin2015-04-214-30/+11
| | | | | | Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 45534
* kernel: remove usb-serial-motorola-phoneJohn Crispin2015-04-211-15/+0
| | | | | | | | replaced by usb-serial-simple (see r45233) Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 45533
* wpan: remove duplicate DEPENDSJohn Crispin2015-04-211-2/+1
| | | | | | Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 45532
* kernel: add bluetooth symbols from Kernel 4.0John Crispin2015-04-211-0/+2
| | | | | | | | | upstream commit: Bluetooth: Introduce BT_BREDR and BT_LE config options id: 65efd2bf4885312b42de9829159789199221cc60 Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 45531
* wpan: rework bluetooth / wpan and 6lowpan dependenciesJohn Crispin2015-04-212-20/+18
| | | | | | | | | | - remove/rename of 6lowpan-iphc upstream change in 3.17: 6lowpan: introduce new net/6lowpan directory id: 2c6bed7cfcd3f594ed9e4d6919fa2ebea2243d19 Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 45529
* nettle: bump to 3.1Steven Barth2015-04-206-3581/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45526
* binutils/oprofile: disable mips16 to fix build errors (#19522)Felix Fietkau2015-04-202-0/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45525
* mac80211: fallback to wpa_supplicant to setup encrypted meshFelix Fietkau2015-04-201-4/+3
| | | | | | | | | | instead of failing when authsae is not installed, also try using wpa_supplicant as the newly added -mesh variants support mesh mode and SAE encryption. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 45520
* hostapd/netifd: encrypted mesh with wpa_supplicantFelix Fietkau2015-04-201-18/+29
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 45519
* odhcp6c: fix SOL_MAX_RT to match RFC 3315Steven Barth2015-04-201-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45514
* nftables: bump versionSteven Barth2015-04-201-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45513
* iproute2: update to v4.0.0Steven Barth2015-04-205-25/+9
| | | | | | | | | | | | The most significant change from the previous version is the trimming of the 300-ip_tiny.patch to lib/utils.c where a section previously patched had vanished. That section of the patch was removed. Built and lightly tested on ar71xx against uClibc and musl. Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 45512
* libnl-tiny: link library with -Bsymbolic-functionsFelix Fietkau2015-04-191-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45510
* lua: link library with -Bsymbolic-functionsFelix Fietkau2015-04-191-0/+11
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45509
* netifd: update to the latest version, fixes more interface device config ↵Felix Fietkau2015-04-191-2/+2
| | | | | | | | handling issues Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45503
* netifd: update to the latest version, fixes more device config handling issuesFelix Fietkau2015-04-181-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45497
* base-files: make the generic sysinfo script run earlier to allow the ↵Felix Fietkau2015-04-181-0/+0
| | | | | | | | mount_root script to pick up the board name Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45496
* iptables: remove obsolete filesFelix Fietkau2015-04-1816-454/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45494
* dropbear: update to 2015.67Steven Barth2015-04-187-414/+16
| | | | | | | | | | | fixes dbclient login into OpenSSH 6.8p1 error: "Bad hostkey signature" reported on irc, replicated with Arch Linux Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 45493
* hostapd: Fix wps button hotplug script to handle multiple radiosJohn Crispin2015-04-181-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hostapd's control file location was changed in 2013, and that has apparently broken the wps button hotplug script in cases where there are multiple radios and wps is possibly configured also for the second radio. The current wps button hotplug script always handles only the first radio. https://dev.openwrt.org/browser/trunk/package/network/services/hostapd/files/wps-hotplug.sh The reason is that the button hotplug script seeks directories like /var/run/hostapd*, as the hostapd-phy0.conf files were earlier in per-interface subdirectories. Currently the *.conf files are directly in /var/run and the control sockets are in /var/run/hostapd, but there is no subdirectory for each radio. root@OpenWrt:/# ls /var/run/hostapd* /var/run/hostapd-phy0.conf /var/run/hostapd-phy1.conf /var/run/hostapd: wlan0 wlan1 The hotplug script was attempted to be fixed after the hostapd change by r38986 in Dec2013, but that change only unbroke the script for the first radio, but left it broken for multiple radios. https://dev.openwrt.org/changeset/38986/ The script fails to find subdirectories with [ -d "$dir" ], and passes just the only found directory /var/run/hostapd, leading into activating only the first radio, as hostapd_cli defaults to first socket found inthe passed directory: root@OpenWrt:/# hostapd_cli -? ... usage: hostapd_cli [-p<path>] [-i<ifname>] [-hvB] [-a<path>] \ [-G<ping interval>] [command..] ... -p<path> path to find control sockets (default: /var/run/hostapd) ... -i<ifname> Interface to listen on (default: first interface found in the socket path) Below is a run with the default script and with my proposed solution. Default script (with logging added): ================================== root@OpenWrt:/# cat /etc/rc.button/wps #!/bin/sh if [ "$ACTION" = "pressed" -a "$BUTTON" = "wps" ]; then for dir in /var/run/hostapd*; do [ -d "$dir" ] || continue logger "WPS activated for: $dir" hostapd_cli -p "$dir" wps_pbc done fi >>>> WPS BUTTON PRESSED <<<<< root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan0 wps_get_status PBC Status: Active Last WPS result: None root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan1 wps_get_status PBC Status: Timed-out Last WPS result: None root@OpenWrt:/# logread | grep WPS Tue Apr 14 18:38:50 2015 user.notice root: WPS activated for: /var/run/hostapd wlan0 got WPS activated, while wlan1 remained inactive. I have modified the script to search for sockets instead of directories and to use the "-i" option with hostapd_cli, and now the script properly activates wps for both radios. As "-i" needs the interface name instead of the full path, the script first changes dir to /var/run/hostapd to get simply the interface names. Modified script (with logging): =============================== root@OpenWrt:/# cat /etc/rc.button/wps #!/bin/sh if [ "$ACTION" = "pressed" -a "$BUTTON" = "wps" ]; then cd /var/run/hostapd for dir in *; do [ -S "$socket" ] || continue logger "WPS activated for: $socket" hostapd_cli -i "$socket" wps_pbc done fi >>>> WPS BUTTON PRESSED <<<<< root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan0 wps_get_status PBC Status: Active Last WPS result: None root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan1 wps_get_status PBC Status: Active Last WPS result: None root@OpenWrt:/# logread | grep WPS Tue Apr 14 18:53:06 2015 user.notice root: WPS activated for: wlan0 Tue Apr 14 18:53:06 2015 user.notice root: WPS activated for: wlan1 Both radios got their WPS activated properly. I am not sure if my solution is optimal, but it seems to work. WPS button is maybe not that often used functionality, but it might be fixed in any case. Routers with multiple radios are common now, so the bug is maybe more prominent than earlier. The modified script has been in a slightly different format in my community build since r42420 in September 2014. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 45492
* Removed reference to imaginary procd_add_interface_reload in procd.shJohn Crispin2015-04-181-1/+0
| | | | | | | | | The last line of procd.sh has a reference to procd_add_interface_reload. procd_add_interface_reload doesn't seem to exist. I've removed the reference of it to minimize confusion. Signed-off-by: Eric Schultz <eschultz@prplfoundation.org> SVN-Revision: 45487
* netifd: update to the latest version, fixes issues in handling device config ↵Felix Fietkau2015-04-171-1/+1
| | | | | | | | from interfaces Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45483
* qos-scripts: drop obsolete depdendency on iptabes-mod-filter (#19506)Felix Fietkau2015-04-171-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45482
* iptables: remove layer7 leftovers (#19506)Felix Fietkau2015-04-171-6/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45481
* network: also shorten virtual interface names of ppp and 3g/4g connectionsSteven Barth2015-04-175-9/+9
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45479
* network: shorten names of generated interfacesSteven Barth2015-04-176-9/+9
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45476
* kernel: mark kmod-usb-bcma/ssb as hidden, they are only selected from ohci/ehciFelix Fietkau2015-04-171-0/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45475
* busybox: fix an ash regression in handling local variablesFelix Fietkau2015-04-171-0/+75
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45471
* base-files: reorder led trigger/brightness writesFelix Fietkau2015-04-161-7/+10
| | | | | | | | | Depending on configuration, disable the LED before writing the trigger and enable it after writing it. Fixes LEDs where the value defaults to 1 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45463
* base-files: add generic preinit script to extract board/model info from ↵Felix Fietkau2015-04-161-0/+10
| | | | | | | | device-tree Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45462
* mvebu: add support for the Linksys Caiman and CobraImre Kaloz2015-04-161-2/+5
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 45456
* bcm53xx: add USB 2.0 supportFelix Fietkau2015-04-151-2/+27
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45450
* odhcp6c: silence "bad number" warningsSteven Barth2015-04-151-4/+4
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45449
* odhcp6c: avoid saving empty RA search domainsSteven Barth2015-04-151-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45448
* opkg: fix md5 related #ifdef (thx, swalker)Felix Fietkau2015-04-141-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45447
* uclient: update to the latest version, fixes a crash in processing ↵Felix Fietkau2015-04-141-2/+2
| | | | | | | | redirect/disconnect after headers Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45446
* otrx: support for creating simple TRX filesRafał Miłecki2015-04-141-0/+185
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45444
* otrx: change command line API to start with a modeRafał Miłecki2015-04-142-56/+70
| | | | | | | | This will allow adding more modes without options conflict. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45443
* rpcd: update to latest git HEADJohn Crispin2015-04-141-2/+2
| | | | | | | | adds support for reading md5 sums of files Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45442
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 19:28:12 +0000