aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* layerscape: add 64b/32b target for ls1046ardb deviceYutang Jiang2016-12-124-3/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | Add support for NXP layerscape ls1046ardb 64b/32b Dev board. LS1046ARDB Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 512 Mbyte NAND flash * Two 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card * On-board 4G eMMC Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: * PCIe1 (SerDes2 Lane0) to miniPCIe slot * PCIe2 (SerDes2 Lane1) to x2 PCIe slot * PCIe3 (SerDes2 Lane2) to x4 PCIe slot * USB 3.0: one super speed USB 3.0 type A port, one Micro-AB port * UART: supports two UARTs up to 115200 bps for console Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* layerscape: fman-ucode: prefer github over git.freescale.comYutang Jiang2016-12-121-1/+1
| | | | | | | In order to prevent the impact of the merger of the company and the potential rebase of the SDK repositories, migrate the u-boot source to github. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* layerscape: uboot-layerscape: prefer github over git.freescale.comYutang Jiang2016-12-1295-18498/+9
| | | | | | | In order to prevent the impact of the merger of the company and the potential rebase of the SDK repositories, migrate the u-boot source to github. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* base-files: Changed UCI variable name for GPIO value from 'default' to 'value'Julian Labus2016-12-121-1/+1
| | | | | | | | | | | This changes the UCI variable for the GPIO value from system.$cfg.default back to system.$cfg.value as it was before the change from uci-defaults [1] to board.d. /etc/init.d/gpio_switch [2] still expects the value to be in system.$cfg.value. [1] https://github.com/lede-project/source/blob/d65916047b44d6d157d88d15e8e3d92555c5e6f8/package/base-files/files/lib/functions/uci-defaults.sh#L197 [2] https://github.com/lede-project/source/blob/master/package/base-files/files/etc/init.d/gpio_switch#L17 Signed-off-by: Julian Labus <julian@labus-online.de>
* kernel: add TI tmp102 and tmp103 temperature sensorsHauke Mehrtens2016-12-101-0/+30
| | | | | | | This just adds the kmods for these kernel modules. This is found on some Lantiq / Intel reference boards. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* build: support adding version code to file names (FS#323)Jo-Philipp Wich2016-12-091-0/+9
| | | | | | | | | | | | | | Now that the VERSION_NUMBER variable holds the human friendly name and not the commit ID anymore, we need to support adding the revision ID as well. Introduce a new config variable CONFIG_VERSION_CODE_FILENAMES which, if set, causes the resulting file names to contain a commit ID designation as printed by scripts/getver.sh. Also sanitize the input variables to ensure that the resulting strings are lowercased and no not contain spaces. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* dnsmasq: Fix splitting hostid for DHCPv6 static leasesArjen de Korte2016-12-061-1/+1
| | | | | | | | | Correct splitting the 32-bit 'hostid' value to two 16-bit hexadecimal values. Previously, the lower 16-bit value was truncated to an 8-bit value, which would result in hostid values 100 and 200 both to be set to [::0:0] instead of [::0:100] and [::0:200] respectively. Signed-off-by: Arjen de Korte <build+lede@de-korte.org>
* dnsmasq: reload config if host name is modifiedFlorian Eckert2016-12-041-1/+2
| | | | | | | If the hostname in /etc/config/system is modified the dnsmasq will not reread the update host file under /tmp/hosts/dhcp.$cfg. Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
* brcm2708-gpu-fw: update to latest versionÁlvaro Fernández Rojas2016-12-041-8/+8
| | | | | | Also switches hases to SHA256 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* libs: libnetfilter-queue: update to a newer version in git repoAlexandru Ardelean2016-12-042-34/+36
| | | | | | | | | Last release of libnetfilter-queue was in 2012. There don't seem to be any release tarballs since then. This updates it to a more recent version, pointing to the git repo. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* ppp: Split the ppp-up for the IPv6 partPierre Lebleu2016-12-044-12/+29
| | | | Signed-off-by: Pierre Lebleu <pme.lebleu@gmail.com>
* kernel: add kernel package for the rs5c372a rtc moduleFlorian Fainelli2016-12-041-0/+16
| | | | | | This RTC is used on the Buffalo Terastation Pro II/Live devices. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* base-files: add a hint in sysupgrade that shows what to do when the image ↵Felix Fietkau2016-12-041-0/+3
| | | | | | metadata check fails Signed-off-by: Felix Fietkau <nbd@nbd.name>
* cyassl: update to wolfssl version 3.9.10Hauke Mehrtens2016-12-031-2/+2
| | | | | | | | | | This fixes the following security problems: CVE-2016-7440: Software AES table lookups do not properly consider cache-bank access times CVE-2016-7439: Software RSA does not properly consider cache-bank monitoring CVE-2016-7438: Software ECC does not properly consider cache-bank monitoring SWEET32 Attack Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* valgrind: update to 3.12.0Hauke Mehrtens2016-12-035-101/+8
| | | | | | | | | | Support for MIPS toolchains without FPU support was added upstream, so remove our patch. patches/310-mips-link-tool.patch was a backport form this version of valgrind src/abort.c is not referenced anywhere Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* curl: update to version 7.51.0Hauke Mehrtens2016-12-033-6/+6
| | | | | | | | | | | | | | | | | This fixes the following security problems: CVE-2016-8615: cookie injection for other servers CVE-2016-8616: case insensitive password comparison CVE-2016-8617: OOB write via unchecked multiplication CVE-2016-8618: double-free in curl_maprintf CVE-2016-8619: double-free in krb5 code CVE-2016-8620: glob parser write/read out of bounds CVE-2016-8621: curl_getdate read out of bounds CVE-2016-8622: URL unescape heap overflow via integer truncation CVE-2016-8623: Use-after-free via shared cookies CVE-2016-8624: invalid URL parsing with '#' CVE-2016-8625: IDNA 2003 makes curl use wrong host Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mbedtls: update to version 2.4.0Hauke Mehrtens2016-12-033-46/+25
| | | | | | This fixes two minor security problems. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* polarssl: update to version 1.3.18Hauke Mehrtens2016-12-032-17/+17
| | | | | | This fixes two minor security problems. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* build: adjust version number handlingJo-Philipp Wich2016-12-025-12/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the revision info to the VERSION_CODE variable and default VERSION_NUMBER to CURRENT for master branch builds. Also introduce a new menuconfig option CONFIG_VERSION_CODE which allows users to override the revision value put into VERSION_CODE and adjust the template files used by the base-files package to accomodate for the changed semantics. While we're at it, also adjust the various URLs to match the current web site. After this commit, the relevent files will look like the examples given below: # cat /etc/openwrt_version r2398+1 # cat /etc/openwrt_release DISTRIB_ID='LEDE' DISTRIB_RELEASE='CURRENT' DISTRIB_REVISION='r2398+1' DISTRIB_CODENAME='reboot' DISTRIB_TARGET='x86/64' DISTRIB_DESCRIPTION='LEDE Reboot CURRENT r2398+1' DISTRIB_TAINTS='no-all override' # cat /usr/lib/os-release NAME="LEDE" VERSION="CURRENT, Reboot" ID="lede" ID_LIKE="lede openwrt" PRETTY_NAME="LEDE Reboot CURRENT" VERSION_ID="current" HOME_URL="http://lede-project.org/" BUG_URL="http://bugs.lede-project.org/" SUPPORT_URL="http://forum.lede-project.org/" BUILD_ID="r2398+1" LEDE_BOARD="x86/64" LEDE_TAINTS="no-all override" LEDE_DEVICE_MANUFACTURER="LEDE" LEDE_DEVICE_MANUFACTURER_URL="http://lede-project.org/" LEDE_DEVICE_PRODUCT="Generic" LEDE_DEVICE_REVISION="v0" LEDE_RELEASE="LEDE Reboot CURRENT r2398+1" On a release branch, those files would look like: # cat /etc/openwrt_version r2399 # cat /etc/openwrt_release DISTRIB_ID='LEDE' DISTRIB_RELEASE='16.12-CURRENT' DISTRIB_REVISION='r2399' DISTRIB_CODENAME='test_release' DISTRIB_TARGET='x86/64' DISTRIB_DESCRIPTION='LEDE Test Release 16.12-CURRENT r2399' DISTRIB_TAINTS='no-all override' # cat /usr/lib/os-release NAME="LEDE" VERSION="16.12-CURRENT, Test Release" ID="lede" ID_LIKE="lede openwrt" PRETTY_NAME="LEDE Test Release 16.12-CURRENT" VERSION_ID="16.12-current" HOME_URL="http://lede-project.org/" BUG_URL="http://bugs.lede-project.org/" SUPPORT_URL="http://forum.lede-project.org/" BUILD_ID="r2399" LEDE_BOARD="x86/64" LEDE_TAINTS="no-all override" LEDE_DEVICE_MANUFACTURER="LEDE" LEDE_DEVICE_MANUFACTURER_URL="http://lede-project.org/" LEDE_DEVICE_PRODUCT="Generic" LEDE_DEVICE_REVISION="v0" LEDE_RELEASE="LEDE Test Release 16.12-CURRENT r2399" On a release tag, those files would look like: # cat /etc/openwrt_version r2500 # cat /etc/openwrt_release DISTRIB_ID='LEDE' DISTRIB_RELEASE='17.02.1' DISTRIB_REVISION='r2500' DISTRIB_CODENAME='mighty_unicorn' DISTRIB_TARGET='x86/64' DISTRIB_DESCRIPTION='LEDE Mighty Unicorn 17.02.1 r2500' DISTRIB_TAINTS='no-all override' # cat /usr/lib/os-release NAME="LEDE" VERSION="17.02.1, Mighty Unicorn" ID="lede" ID_LIKE="lede openwrt" PRETTY_NAME="LEDE Mighty Unicorn 17.02.1" VERSION_ID="17.02.1" HOME_URL="http://lede-project.org/" BUG_URL="http://bugs.lede-project.org/" SUPPORT_URL="http://forum.lede-project.org/" BUILD_ID="r2500" LEDE_BOARD="x86/64" LEDE_TAINTS="no-all override" LEDE_DEVICE_MANUFACTURER="LEDE" LEDE_DEVICE_MANUFACTURER_URL="http://lede-project.org/" LEDE_DEVICE_PRODUCT="Generic" LEDE_DEVICE_REVISION="v0" LEDE_RELEASE="LEDE Mighty Unicorn 17.02.1 r2500" Signed-off-by: Jo-Philipp Wich <jo@mein.io> Acked-by: Felix Fietkau <nbd@nbd.name>
* procd: update to the latest version, fixes killing jailed processesFelix Fietkau2016-12-021-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libubox: update to the latest versionFelix Fietkau2016-12-011-3/+3
| | | | | | | - Improves C++ compatibility - Adds static initializers for the kvlist API Signed-off-by: Felix Fietkau <nbd@nbd.name>
* xtables-addons: add CONFIG_NF_CONNTRACK_MARK=y to all kmod-* packagesFelix Fietkau2016-12-011-2/+2
| | | | | | | Not all kmod packages depends on kmod-ipt-compat-xtables, but this kernel config option is required for building the whole package Signed-off-by: Felix Fietkau <nbd@nbd.name>
* e2fsprogs: avoid picking up incompatible libcom_err.soJo-Philipp Wich2016-11-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | Commit 2728512 ("e2fsprogs: List all libraries explicitly") forced the e2fsprogs build system to link libcom_err.so in various places. Unfortunately, the krb5 package also ships a libcom_err.so with a totally different ABI and puts it into the global staging directory which causes e2fsprogs to pick up this wrong library, leading to the following failure: LD blkid ../lib/libext2fs.so: undefined reference to `_et_list' collect2: error: ld returned 1 exit status Makefile:504: recipe for target 'blkid' failed Change the SYSLIBS specification to explicitely link libcom_err.so.0.0 which in order to work around the problem. In the long run, the libcom_err clash between e2fsprogs and krb5 needs to be solved properly. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* rtc-rv5c386a: fix include path for bcm47xx_nvram.hFelix Fietkau2016-11-301-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files: add a wrapper for init scripts in profileAlberto Bursi2016-11-291-0/+9
| | | | | | | | | | | "service" is a simple wrapper that will allow to call init.d scripts current method: # /etc/init.d/network reload with the wrapper: # service network reload If the wrapper is called without arguments or with a wrong init script name, it will print an error and list the content of /etc/init.d/ folder Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* uboot-lantiq: Add BT Home Hub 5A supportMathias Kresin2016-11-292-0/+352
| | | | | | | | | | | | | | | | | | Based on the submission to the uboot-lantiq repo by Martin Blumenstingl. Use the ddr_settings.h from the GPL tarball. The NAND boot optimized one (with memory tuning enabled) doesn't work for the UART boot image. Use the same mtd layout as the stock u-boot. Add add UBI support. Use the leds to indicate boot status like it is done with the stock u-boot. Switch on the red power led if kernel image can't be loaded. Otherwise switch the green led on. Make only the ramboot u-boot available. Only this image is required for the first installation of LEDE. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: mac80211: disable ath9k bands via device treeMartin Blumenstingl2016-11-291-0/+32
| | | | | | | | | | | | | These properties allow overriding the settings from the EEPROM which indicate whether a band is enabled or not. Setting this property is only needed when the RF circuit does not support the 2.4GHz or 5GHz band while it is enabled nevertheless in the EEPROM. These patches will be replaced with a future upstream version which will introduces an ieee80211 device tree property to disable bands. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: mac80211: add pending ath9k EEPROM swapping patchesMartin Blumenstingl2016-11-297-0/+1730
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two types of swapping the EEPROM data in the ath9k driver. Before this series one type of swapping could not be used without the other. The first type of swapping looks at the "magic bytes" at the start of the EEPROM data and performs swab16 on the EEPROM contents if needed. The second type of swapping is EEPROM format specific and swaps specific fields within the EEPROM itself (swab16, swab32 - depends on the EEPROM format). With this series the second part now looks at the EEPMISC register inside the EEPROM, which uses a bit to indicate if the EEPROM data is Big Endian (this is also done by the FreeBSD kernel). This has a nice advantage: currently there are some out-of-tree hacks (in OpenWrt and LEDE) where the EEPROM has a Big Endian header on a Big Endian system (= no swab16 is performed) but the EEPROM itself indicates that it's data is Little Endian. Until now the out-of-tree code simply did a swab16 before passing the data to ath9k, so ath9k first did the swab16 - this also enabled the format specific swapping. These out-of-tree hacks are still working with the new logic, but it is recommended to remove them. This implementation is based on a discussion with Arnd Bergmann who raised concerns about the robustness and portability of the swapping logic in the original OF support patch review, see [0]. After a second round of patches (= v1 of this series) neither Arnd Bergmann nor I were really happy with the complexity of the EEPROM swapping logic. Based on a discussion (see [1] and [2]) we decided that ath9k should use a defined format (specifying the endianness of the data - I went with __le16 and __le32) when accessing the EEPROM fields. A benefit of this is that we enable the EEPMISC based swapping logic by default, just like the FreeBSD driver, see [3]. On the devices which I have tested (see below) ath9k now works without having to specify the "endian_check" field in ath9k_platform_data (or a similar logic which could provide this via devicetree) as ath9k now detects the endianness automatically. Only EEPROMs which are mangled by some out-of-tree code still need the endian_check flag (or one can simply remove that mangling from the out-of-tree code). [0] http://www.spinics.net/lists/linux-wireless/msg152634.html [1] https://marc.info/?l=linux-wireless&m=147250597503174&w=2 [2] https://marc.info/?l=linux-wireless&m=147254388611344&w=2 [3] https://github.com/freebsd/freebsd/blob/50719b56d9ce8d7d4beb53b16e9edb2e9a4a7a18/sys/dev/ath/ath_hal/ah_eeprom_9287.c#L351 Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: mac80211: backport ath9k device tree support patchesMartin Blumenstingl2016-11-293-0/+194
| | | | | | | | | | | | | These patches add support for configuring ath9k based devices via devicetree. This was tested on PCI(e) based devices. This should work for AHB based devices as well (adding more AHB specific properties may still be needed) as soon as the ath79 platform is ready to populate the ath9k wmac via devicetree. This patchset was accepted upstream, more information can be found on the linux-wireless list: https://www.spinics.net/lists/linux-wireless/msg155474.html Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: have kmod-ipsec depend on kmod-crypto-echainivStijn Tintel2016-11-291-1/+4
| | | | | | | | | The ESP algorithms in CBC mode require echainiv, so have kmod-ipsec depend on kmod-crypto-echainiv. See upstream commit 32b6170ca59ccf07d0e394561e54b2cd9726038c. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* iw: drop TX power patch that is part of upstream version nowRafał Miłecki2016-11-291-30/+0
| | | | | | | | | | | | | | | | Applying it again was resulting in duplicated TX info like: Interface wlan0 ifindex 6 wdev 0x1 addr 00:23:6a:a3:7d:00 ssid LEDE2 type AP wiphy 0 channel 11 (2462 MHz), width: 20 MHz, center1: 2462 MHz txpower 31.00 dBm txpower 31.00 dBm Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ltq-hcd: drop packageMathias Kresin2016-11-2717-21402/+0
| | | | | | | Since ffd7c155008bff4b08197dfd710d7a1386313f98 it isn't used anymore on any supported target. Signed-off-by: Mathias Kresin <dev@kresin.me>
* gpio-button-hotplug: add more buttonsMathias Kresin2016-11-271-15/+24
| | | | | | The keycodes are used by some boards. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipset: Add InstallDev to provide libipset as libraryJulian Kornberger2016-11-261-1/+8
|
* kernel: fix typo in input-gpio-encoder package titleAvi H. D2016-11-261-1/+1
| | | | | | Line 115, 'rotary' was misspelled as 'rotay' Signed off by: Avinash Duduskar <strykar@hotmail.com>
* kernel: remove another redundant KCONFIG entry in virt.mkFelix Fietkau2016-11-241-3/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix virtualization kmod dependencies and kconfig symbolsFelix Fietkau2016-11-241-18/+6
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove kmod-vhost_net, fixes build breakageFelix Fietkau2016-11-241-18/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libnl-tiny: Remove GENL_ID_GENERATEFlorian Fainelli2016-11-241-1/+1
| | | | | | | | | | | This constant was always defined to 0, and recently got removed in upstream commit a07ea4d9941af5a0c6f0be2a71b51ac9c083c5e5 ("genetlink: no longer support using static family IDs") Fixes libnl-tiny builds with latest upstream kernels. Fixes: d723f2573af3 ("libnl-tiny: remove include/linux overrides to fix various build issues") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* package: add kernel packages for kvm virtualizationYousong Zhou2016-11-241-0/+105
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* package/utils/fuse: update to 2.9.7Paul Wassi2016-11-244-74/+5
| | | | | | | | Update fuse+libfuse to upstream 2.9.7. Drop the patch for CVE-2015-3202, which is already integrated in the newer version. Rework the other patches. Also switch PKG_SOURCE from @SF to libfuse's github releases. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* uboot-envtools: make it not sharedEddi De Pieri2016-11-231-0/+2
| | | | | | | | | | | | uboot-envtools have some stuff related to the cpu. This should fix following error on lantiq soc: Downloading http://downloads.lede-project.org/snapshots/packages/mips_24kc/base/uboot-envtools_2015.10-1_mips_24kc.ipk. Configuring uboot-envtools. //usr/lib/opkg/info/uboot-envtools.postinst: .: line 10: can't open '/lib/ar71xx.sh' Signed-off-by: Eddi De Pieri <eddi@depieri.net>
* uboot-lantiq: vgv7519 fix tftp loading of big kernel/image sizeEddi De Pieri2016-11-231-1/+3
| | | | | | | | | | | | | | | | | | On my board: Bytes transferred = 7084442 (6c199a hex) Image Name: MIPS OpenWrt Linux-3.10.49 Created: 2014-11-11 17:40:00 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 7084378 Bytes = 6.8 MiB Load Address: 80002000 Entry Point: 80002000 Verifying Checksum ... OK Uncompressing Kernel Image ... LZMA: uncompress or overwrite error 7 - must RESET b ROM VER: 1.0.5 CFG 01 Signed-off-by: Eddi De Pieri <eddi@depieri.net>
* ath10k-ct-firmware: Update to latest firmwares.Ben Greear2016-11-221-6/+6
| | | | | | | | | | | | The 10.1 includes a good many stability fixes related to the effort of backporting upstream 10.2 firmware. Also enables 802.1q vlan support. Successfully tested on apu2. The 10.4 firmwares including new backported code as well as stability fixes. 10.4 has been tested on Fedora x86-64 platforms, but not on LEDE specifically since I had issues compiling LEDE for my 9980/9984 AP hardware. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct: Update to latest.Ben Greear2016-11-221-2/+2
| | | | | | Fixes locking issue, quietens some potential message floods. Signed-off-by: Ben Greear <greearb@candelatech.com>
* netifd: update to the latest versionFelix Fietkau2016-11-221-3/+3
| | | | | | Fixes config reload on bridge MAC address changes Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files: ignore failure of stopping services on removalJonas Gorski2016-11-211-1/+1
| | | | | | | | | Packages that do a killall <cmd> with the same name as the init script will fail the prerm step when the service isn't running. Do make them removable without having to restart the service, ignore the return code. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Jo-Philipp Wich <jo@mein.io>
* opkg: run prerm scripts for the old version also on upgradeJonas Gorski2016-11-212-1/+74
| | | | | | | | | To make sure we properly restart services on upgrade we need to call the prerm script of the old package, in case the init script changes (or vanishes). Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Jo-Philipp Wich <jo@mein.io>
* base-files: don't modify enabled state of service on upgradeJonas Gorski2016-11-212-11/+13
| | | | | | | | Properly stop/start services on upgrade, but don't change the enabled state. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Jo-Philipp Wich <jo@mein.io>
* opkg: set PKG_UPGRADE also when running scripts for the old packageJonas Gorski2016-11-215-15/+16
| | | | | | | | Allow scripts from the package to be upgraded to be aware of being upgraded. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Jo-Philipp Wich <jo@mein.io>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 18:08:57 +0000