aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* uboot-sunxi: fix default config for OLIMEX A13 SOM (FS#239)Jo-Philipp Wich2016-11-0220-277/+58
| | | | | | | | | | | | | | | | | | The current uboot default config for the A13 SOM erroneously enables support for the AXP209 power regulator IC which is not present on the board. This superfluous support module sets an incorrect initial clock frequency and confuses the kernel, ultimately leading to a boot failure later on. Properly disable the PMIC support and enable the EHCI support by translating the deprecated SYS_EXTRA_OPTIONS values into proper SUNXI_NO_PMIC and USB_EHCI_HCD symbols respectively. Also rename 002-add-olimex-a13-som.diff to 002-add-olimex-a13-som.patch and refresh the remaining patches of the series while we're at it. Reported-by: Mario Fischer <mario-fischer@web.de> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* base-files: uci-defaults: support requesting untagged switch port configurationJo-Philipp Wich2016-11-021-8/+14
| | | | | | | | | | | | | Introduce support for a new [0-9]u@netdev syntax to ucidev_add_switch() to let board.d network files request default network switch configurations which do not use tagged CPU ports. This commit itself has no effect on generated configurations at the moment since we still emit untagged configurations by default but it allows boards to opt-out from default tagged configs in case we start emitting tagged settings by default. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* fstools: add build-depends on util-linuxJo-Philipp Wich2016-11-011-0/+1
| | | | | | | The libblkid probe support in fstools git head requires blkid/blkid.h for compilation, so add a build dependency on util-linux which provides libblkid. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* layerscape: add 64b/32b target for ls1012ardb deviceYutang Jiang2016-10-3192-5/+18046
| | | | | | | | | | | | | | | | | | | | | | | | The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* layerscape: add 64b/32b target for ls1043ardb deviceYutang Jiang2016-10-319-0/+832
| | | | | | | | | | | | | | | | | | Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* lantiq: added xrx200 as plattform for ltqvmmcStefan Koch2016-10-311-1/+1
| | | | Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
* lantiq: added xrx200 as plattform for ltqtapiStefan Koch2016-10-311-1/+1
| | | | Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
* lantiq: fix vmmc buildStefan Koch2016-10-312-5/+18
| | | | | | | | | | | | | (required not-distributable firmware blob - dump it by yourself from original firmware) Signed-off-by: Eddi De Pieri <eddi@depieri.net> (cherry picked from commit 47b1ff965b0cb57013b40fbe2bcd7f3c6eb6b606) Modified after cherry-pick: FW_MD5SUM in Makefile Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
* lantiq: ltq-vmmc add support for ar9-vr9Stefan Koch2016-10-311-0/+247
| | | | | | | | | (required not-distributable firmware blob - dump it by yourself from original firmware) Signed-off-by: Eddi De Pieri <eddi@depieri.net> (cherry picked from commit ea9e61b8eb61a2e362a50541f03466dc7d087947) Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
* fstools: update to latest git HEADJohn Crispin2016-10-311-3/+3
| | | | | | adds f2fs support Signed-off-by: John Crispin <john@phrozen.org>
* base-files: sysfixtime: Keep RTC time in UTC timezonePetr Štetiar2016-10-311-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to tell hwclock with -u commandline option, that we would like to keep our RTC clock in UTC timezone. Linux kernel expects RTC in UTC timezone anyway. In current state of things, we don't tell hwclock to load/store time from/to RTC in UTC timezone so it uses the timezone from the system time. If it's set to different timezone then UTC, sysfixtime is going to screw the time in RTC. I've following in the setup script: uci set system.@system[0].timezone='CET-1CEST,M3.5.0,M10.5.0/3' uci set system.@system[0].zonename='Europe/Prague' I've this RTC setup (rtc1 is RTC on i.MX6 SoC, rtc0 is battery backed RTC mcp7941x): rtc-ds1307 3-006f: rtc core: registered mcp7941x as rtc0 snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1 Then we can experience following (current time is 10:15am): $ date Fri Oct 21 10:15:07 CEST 2016 $ hwclock -r -f /dev/rtc0 Fri Oct 21 08:14:46 2016 0.000000 seconds $ hwclock -u -r -f /dev/rtc0 Fri Oct 21 10:14:46 2016 0.000000 seconds And after current broken sysfixtime: $ /etc/init.d/sysfixtime stop $ date Fri Oct 21 10:15:25 CEST 2016 $ hwclock -r -f /dev/rtc0 Fri Oct 21 10:15:31 2016 0.000000 seconds Now we've time in our battery backed RTC in CEST timezone instead of UTC. Then once again, but with this patch applied to sysfixtime, where hwclock is using correctly the -u parameter: $ /etc/init.d/sysfixtime stop $ date Fri Oct 21 10:15:53 CEST 2016 $ hwclock -r -f /dev/rtc0 Fri Oct 21 08:15:55 2016 0.000000 seconds Signed-off-by: Petr Štetiar <ynezz@true.cz> Acked-by: Jo-Philipp Wich <jo@mein.io>
* hostapd: properly package wpa-supplicant-meshAlexis Green2016-10-311-1/+2
| | | | | | | | | Ensure that selecting the wpa-supplicant-mesh package actually packages the wpa_supplicant binary with SAE support and add missing dependency on OpenSSL. Signed-off-by: Alexis Green <alexis@cessp.it> [Jo-Philipp Wich: slightly reword commit message for clarity] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* hostapd support for VLANs through a file in addition to Radius.Petr Konecny2016-10-311-18/+25
| | | | Signed-off-by: Petr Konecny <pekon@google.com>
* uhttpd: Add Basic Auth configDaniel Dickinson2016-10-312-1/+38
| | | | | | | | | | | | | | | | | We add an 'httpauth' section type that contains the options: prefix: What virtual or real URL is being protected username: The username for the Basic Auth dialogue password: Hashed (crypt()) or plaintext password for the Basic Auth dialogue httpauth section names are given included as list items to the instances to which they are to be applied. Further any existing httpd.conf file (really whatever is configured in the instance, but default of /etc/httpd.conf) is appended to the per-instance httpd.conf Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
* lldpd: freeze execution of lldpd during reloadAlexandru Ardelean2016-10-311-1/+5
| | | | | | | | | | During reload, we could send invalid information to the other side and confuse it. That's why, during reload we'll pause execution, do the reconfig and resume + update when reload is done. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* lldpd: fix reload function for when interfaces changeAlexandru Ardelean2016-10-312-20/+44
| | | | | | | | | | | | | | | | The problem is that interfaces are specified at start as command line arguments, making them unchange-able via reload. That means, we have to move (since lldpd allows this) the interfaces-match-pattern option to be in a config file and reload the configuration. It's either that, or do a 'restart'. Since we're generating the lldpd.conf file, we'll have to move the 'sysconfdir' of lldpd to /tmp, where the files will get written ; this will prevent any unncessary flash writes. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* ath10k-firmware: update qca9984 firmwarePavel Kubelun2016-10-311-2/+3
| | | | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> [Jo-Philipp Wich: add mirror sha256 sum] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* openvpn: cacert does not existJohn Crispin2016-10-271-2/+2
| | | | | | cacert is really called ca and already in the script Signed-off-by: John Crispin <john@phrozen.org>
* linux/modules: drop ledtrig-netfilterJohn Crispin2016-10-271-21/+0
| | | | | | this is a duplicate of kmod-ipt-led Signed-off-by: John Crispin <john@phrozen.org>
* openvpn: add handling for capath and cafileJohn Crispin2016-10-271-1/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* package/network/utils/ipset: Update to 6.30Daniel Engberg2016-10-271-2/+2
| | | | | | Updates to 6.30 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* util-linux: disc -> Disc and moved some packagesAlberto Bursi2016-10-271-11/+11
| | | | | | | | | Capitalized "disc" submenu name as all submenu names are capitalized (apart from "database", but I'll fix that later). moved "swap-utils" to Filesystem submenu as it is "formatting" a partition as swap so it looks out of place in Disc. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* ath10k-ct: Add QCA9888/9886 support, fix compat issue.Ben Greear2016-10-271-2/+2
| | | | | | | This should fix problems with latest backports, and also adds driver support for QCA9888 chipset. Signed-off-by: Ben Greear <greearb@candelatech.com>
* base-files: Ensure reset only works if an overlay existsChris Blake2016-10-271-1/+5
| | | | | | | | | | | | | | Currently the reset script will try to run jffs2reset on boards that are running a rw rootfs, such as ext4. This will cause jffs2reset to fail and the board to never reboot while the LED blinks until a manual reboot. This commit does two different things: 1. Disables reset on boards that do not have an overlay mount 2. Disables the Blinking LED after 5 seconds if the board does not support reset Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* netifd: update to latest git HEADJohn Crispin2016-10-271-3/+3
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* uboot-kirkwood: fix default bootcmd for Seagate DockstarPaul Wassi2016-10-271-1/+1
| | | | | | | Fix the default value for the 'bootcmd' environment variable. Therefore make the default bootcmd work for buildbot's images. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* uboot-kirkwood: bump to upstream 2016.09.01Paul Wassi2016-10-2717-385/+52
| | | | | | | Bump U-Boot for Kirkwood to upstream 2016.09.01. Local patches cleaned up and reworked. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* ar71xx: add support for D-Link DAP-2695 rev. A1Stijn Tintel2016-10-271-0/+1
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
* mtd: add fixwrgg commandStijn Tintel2016-10-275-3/+239
| | | | | | | Based on fixseama. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
* mtd: fix endianness detection on muslStijn Tintel2016-10-272-0/+2
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
* dnsmasq: Multiple dnsmasq instances supportHans Dedecker2016-10-261-185/+270
| | | | | | | | | | | | | | | | | | | Adds support in uci for configuring multiple dnsmasq instances via multiple dnsmasq sections. The uci sections host, boot, mac, tag, vendorclass, userclass, circuitid, ... will refer to a dnsmasq instance via the instance parameter defined in the section; if the instance parameter is not specified backwards compatibility is preserved. Start/Stopping a dnsmasq instance can be achieved by passing the dnsmasq instance name as argument to start/stop via the init script. Multiple dnsmasq instances is usefull in scenarios where you want to bind a dnsmasq instance to an interface in order to isolate networks. This patch is a rework of a multiple dnsmasq instance patch by Daniel Dickinson Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* grub2: add missing SECTION variable and remove non breaking spaceJo-Philipp Wich2016-10-261-1/+2
| | | | | | | | Fix metadata scan failure in the grub2 package by removing an unexpected invisible space character and by adding back the missing SECTION variable which was removed with d140648. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ipip: Support fqdn as remote tunnel endpointHans Dedecker2016-10-262-3/+16
| | | | Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uhttpd: create self-signed certificates with unique subjectsHannu Nyman2016-10-261-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | Add a partially random O= item to the certificate subject in order to make the automatically generated certificates' subjects unique. Firefox has problems when several self-signed certificates with CA:true attribute and identical subjects have been seen (and stored) by the browser. Reference to upstream bugs: https://bugzilla.mozilla.org/show_bug.cgi?id=1147544 https://bugzilla.mozilla.org/show_bug.cgi?id=1056341 https://bugzilla.redhat.com/show_bug.cgi?id=1204670#c34 Certificates created by the OpenSSL one-liner fall into that category. Avoid identical certificate subjects by including a new 'O=' item with CommonName + a random part (8 chars). Example: /CN=LEDE/O=LEDEb986be0b/L=Unknown/ST=Somewhere/C=ZZ That ensures that the browser properly sees the accumulating certificates as separate items and does not spend time trying to form a trust chain from them. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* uhttpd: prefer px5g for certificate creationHannu Nyman2016-10-261-2/+2
| | | | | | | Prefer the old default 'px5g' for certificate creation as Firefox seems to dislike OpenSSL-created certs. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* netifd: Request DHCP option 121 (classless route) by defaultBaptiste Jonglez2016-10-261-2/+5
| | | | | | | | | | | | | | | | | | | This option, defined by RFC3442, allows a DHCP server to send static routes to a client. But the client has to request this option explicitely. Static routes are useful when the gateway configured by DHCP cannot be in the same subnet as the client. This happens, for instance, when using DHCP to hand out addresses in /32 subnets. A new configuration option "classlessroute" is available, allowing users to disable this feature (the option defaults to true). Other DHCP clients already request this option by default (dhcpcd, for instance, and possibly Windows). If a DHCP server does not support this option, it will simply ignore it. Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* wwan: rename data filesSimon Hailes2016-10-26348-0/+10
| | | | | | This is to ensure that git can be cloned onto a windows drive without failing. Signed-off-by: Simon Hailes <btsimonh@googlemail.com>
* usbmode: rename data filesSimon Hailes2016-10-262-0/+11
| | | | | | This is to ensure that git can be cloned onto a windows drive without failing. Signed-off-by: Simon Hailes <btsimonh@googlemail.com>
* px5g-standalone: move to Encryption submenu and fix TitleAlberto Bursi2016-10-261-1/+2
| | | | | | | | moved px5g-standalone to Encryption submenu of Utilities. Fixed title by removing the first "standalone" word from title. The name is now consistent with other px5g packages, it is also shorter and will be shown in make menuconfig. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* px5g: move to Encryption submenuAlberto Bursi2016-10-261-0/+1
| | | | | | moved px5g to Encryption submenu of Utilities, in an effort to tidy up a bit the Utilities section of make menuconfig. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* package/uboot-envtools: Add support for ZyXEL NBG6817André Valentin2016-10-261-0/+3
| | | | Signed-off-by: André Valentin <avalentin@marcant.net>
* package/basefiles: add mkfs.ext4 and losetup binaries to ramfs listAndré Valentin2016-10-261-0/+2
| | | | | | | mkfs.ext4 und losetup are needed for sysupgrade support on mmc devices with automatic rootfs split (loopback device usage). Signed-off-by: André Valentin <avalentin@marcant.net>
* strace: Update to 4.14Daniel Engberg2016-10-261-2/+2
| | | | | | Update to version 4.14 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* qmi: add metric, defaultroute and peerdns options for qmi protocolMarcin Jurkowski2016-10-261-8/+10
| | | | | | | | | | | | | Adds generic network options for qmi protocol dynamic interfaces as suggested by Felix in https://lists.openwrt.org/pipermail/openwrt-devel/2016-February/039794.html. IPv6-related code taken from Bruno's patch https://patchwork.ozlabs.org/patch/584816. This depends on netifd patch https://patchwork.ozlabs.org/patch/686820/. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Signed-off-by: Bruno Randolf <br1@einfach.org>
* mbim: add metric, defaultroute and peerdns options for mbim protocolMarcin Jurkowski2016-10-261-2/+5
| | | | | | | | | | Adds generic network options for mbim protocol dynamic interfaces as suggested by Felix in https://lists.openwrt.org/pipermail/openwrt-devel/2016-February/039794.html. This depends on netifd patch https://patchwork.ozlabs.org/patch/686820/. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
* comgt: add metric, defaultroute and peerdns options for directip protocolMarcin Jurkowski2016-10-261-2/+5
| | | | | | | | | | Adds generic network options for directip protocol dynamic interfaces as suggested by Felix in https://lists.openwrt.org/pipermail/openwrt-devel/2016-February/039794.html. This depends on netifd patch https://patchwork.ozlabs.org/patch/686820/. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
* comgt: add metric, defaultroute and peerdns options for ncm protocolMarcin Jurkowski2016-10-261-2/+5
| | | | | | | | | | Adds generic network options for ncm protocol dynamic interfaces as suggested by Felix in http://lists.openwrt.org/pipermail/openwrt-devel/2016-February/039794.html. This depends on netifd patch https://patchwork.ozlabs.org/patch/686820/. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
* uboot-zynq: fix compile error for be short of dtcYutang Jiang2016-10-261-1/+2
| | | | | | | | | | | | | | | | | While enable zynq uboot: CONFIG_PACKAGE_uboot-zynq-zc702 CONFIG_PACKAGE_uboot-zynq-zed CONFIG_PACKAGE_uboot-zynq-zybo make will arise dtc error: ./scripts/dtc-version.sh: line 17: dtc: command not found ./scripts/dtc-version.sh: line 18: dtc: command not found *** Your dtc is too old, please upgrade to dtc 1.4 or newer make[4]: *** [checkdtc] Error 1 Pass the kernel dtc to uboot for compile. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* grub2: move to Boot Loaders categoryAlberto Bursi2016-10-261-3/+2
| | | | | | | | | | because boot loaders are in Boot Loaders, not in Utilities -> Boot Loaders Also moved brub2-editenv in Utilities -> Boot Loaders Part of a wider housekeeping effort on the packages repository. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* fconfig: move to Boot Loaders submenu of UtilitiesAlberto Bursi2016-10-261-0/+1
| | | | | | Boot Loaders submenu of Utilities is the most logical place to find fconfig and other bootloader tools. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 21:52:01 +0000