aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* uboot-sunxi: bump to 2019.01Zoltan HERPAI2019-03-135-9/+9
| | | | | | | | | | | | | | Tested on: Bananapro (A20) Banana Pi M3 (A83t) Linksprite pcDuino3 (A20) Olinuxino Lime (A10) Orange Pi 2 (H3) Pine64 (A64) Patches refreshed. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ipq40xx: add support for AVM FRITZ!Repeater 3000David Bauer2019-03-133-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Qualcomm IPQ4019 RAM: 256M (NANYA NT5CC128M16JR-EK) FLASH: 128M NAND (Macronix MX30LF1G18AC-XKI) ETH: Qualcomm QCA8072 WiFi2: IPQ4019 2T2R 2SS b/g/n WiFi5: IPQ4019 2T2R 2SS n/ac WiFi5: QCA9984 4T4R 4SS n/ac LED: - Connect green/blue/red - Power green BTN: WPS/Connect UART: 115200n8 3.3V VCC - RX - TX - GND (Square is VCC) Installation ------------ 1. Grab the uboot for the Device from the 'u-boot-fritz3000' subdirectory. Place it in the same directory as the 'eva_ramboot.py' script. It is located in the 'scripts/flashing' subdirectory of the OpenWRT tree. 2. Assign yourself the IP address 192.168.178.10/24. Connect your Computer to one of the boxes LAN ports. 3. Connect Power to the Box. As soon as the LAN port of your computer shows link, load the U-Boot to the box using following command. > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz3000.bin 4. The U-Boot will now start. Now assign yourself the IP address 192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP server root directory and rename it to 'FRITZ3000.bin'. 5. The Box will now boot OpenWRT from RAM. This can take up to two minutes. 6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using scp. SSH into the Box and first write the Bootloader to both previous kernel partitions. > mtd write /path/to/uboot-fritz3000.bin uboot0 > mtd write /path/to/uboot-fritz3000.bin uboot1 7. Remove the AVM filesystem partitions to make room for our kernel + rootfs + overlayfs. > ubirmvol /dev/ubi0 --name=avm_filesys_0 > ubirmvol /dev/ubi0 --name=avm_filesys_1 8. Flash OpenWRT peristently using sysupgrade. > sysupgrade -n /path/to/openwrt-sysupgrade.bin Signed-off-by: David Bauer <mail@david-bauer.net>
* fritz-tools: add support for IPQ40xx platformDavid Bauer2019-03-131-2/+10
| | | | | | | | AVM devices based on Qualcomm IPQ40xx do not store sector health information in the OOB area. Make this check optional to support this platform. Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-fritz4040: bump version to 2019-03-03David Bauer2019-03-131-3/+3
| | | | | | Adds support for the AVM FRITZ!Repeater 3000 Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: add support for Xiaomi Mi Router 3 ProOzgur Can Leonard2019-03-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware: CPU: MediaTek MT7621AT (2x880MHz) RAM: 512MB DDR3 FLASH: 256MB NAND WiFi: 2.4GHz 4x4 MT7615 b/g/n (Needs driver, See Issues!) WiFI: 5GHz 4x4 MT7615 a/n/ac (Needs driver, See Issues!) USB: 1x 3.0 ETH: 1x WAN 10/100/1000 3x LAN 10/100/1000 LED: Power/Status BTN: RESET UART: 115200 8n1 Partition layout and boot: Stock Xiaomi firmware has the MTD split into (among others) - kernel0 (@0x200000) - kernel1 (@0x600000) - rootfs0 - rootfs1 - overlay (ubi) Xiaomi uboot expects to find kernels at 0x200000 & 0x600000 referred to as system 1 & system 2 respectively. a kernel is considered suitable for handing control over if its linux magic number exists & uImage CRC are correct. If either of those conditions fail, a matching sys'n'_fail flag is set in uboot env & a restart performed in the hope that the alternate kernel is okay. If neither kernel checksums ok and both are marked failed, system 2 is booted anyway. Note uboot's tftp flash install writes the transferred image to both kernel partitions. Installation: Similar to the Xiaomi MIR3G, we keep stock Xiaomi firmware in kernel0 for ease of recovery, and install OpenWRT into kernel1 and after. The installation file for OpenWRT is a *squashfs-factory.bin file that contains the kernel and a ubi partition. This is flashed as follows: nvram set flag_try_sys1_failed=1 nvram set flag_try_sys2_failed=0 nvram commit dd if=factory.bin bs=1M count=4 | mtd write - kernel1 dd if=factory.bin bs=1M skip=4 | mtd write - rootfs0 reboot Reverting to stock: The part of stock firmware we've kept in kernel0 allows us to run stock recovery, which will re-flash stock firmware from a *.bin file on a USB. For this we do the following: fw_setenv flag_try_sys1_failed 0 fw_setenv flag_try_sys2_failed 1 reboot After reboot the LED status light will blink red, at which point pressing the 'reset' button will cause stock firmware to be installed from USB. Issues: OpenWRT currently does not have support for the MT7615 wifi chips. There is ongoing work to add mt7615 support to the open source mt76 driver. Until that support is in place, there are closed-source kernel modules that can be used. See: https://forum.openwrt.org/t/support-for-xiaomi-wifi-r3p-pro/20290/170 Signed-off-by: Ozgur Can Leonard <ozgurcan@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [02_network remaps, Added link to notes]
* ath79: add support for LibreRouter v1Santiago Piccinini2019-03-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SOC: QCA9558 RAM: 128M DDR2 Flash: 16MiB SPI-NOR ETH: QCA8337N: 2x 10/100/1000 PoE and PoE pass-through WiFi2: QCA9558 (bgn) 2T2R WiFi5: 2x mPCIE with AR9582 (an) 2T2R BTN: 1x Reset GPIO: multiple GPIO on header, PoE passthrough enable UART: 3.3V 115200 8N1 header on the board WDG: ATTiny13 watchdog JTAG: header on the board USB: 1x connector and 1x header on the board PoE: 10-32V input in ETH port 1, passthrough in port 2 mPCIE: 2x populated with radios (but replaceable) OpenWrt is preinstalled from factory. To install use <your-image>-sysupgade.bin using the web interface or with sysupgrade -n. Flash from bootloader (in case failsafe does not work) 1. Connect the LibreRouter with a serial adapter (TTL voltage) to the UART header in the board. 2. Connect an ETH cable and configure static ip addres 192.168.1.10/24 3. Turn on the device and stop the bootloader sending any key through the serial interface. 4. Use a TFTP server to serve <your image>-sysupgrade.bin file. 5. Execute the following commands at the bootloader prompt: ath> tftp 82000000 <your image>-sysupgrade.bin ath> erase 0x9f050000 +$filesize ath> cp.b 0x82000000 0x9f050000 $filesize ath> bootm 0x9f050000 More docs * Bootloader https://github.com/librerouterorg/u-boot * Board details (schematics, gerbers): https://github.com/librerouterorg/board Signed-off-by: Santiago Piccinini <spiccinini@altermundi.net>
* openssl: disable digests by default, misc fixesEneas U de Queiroz2019-03-124-2/+79
| | | | | | | | | | | | | | | | | | | | | | Openssh uses digest contexts across forks, which is not supported by the /dev/crypto engine. The speed of digests is usually not worth enabling them anyway. This changes the default of the DIGESTS option to NONE, so the user still has the option to enable them. Added another patch related to the use of encryption contexts across forks, that ignores a failure to close a previous open session when reinitializing a context, instead of failing the reinitialization. Added a link to the Cryptographic Hardware Accelerators document to the engine pacakges description, to provide more detailed instructions to configure the engines. Revert the removal of the OPENSSL_ENGINE_CRYPTO symbol, currently used by openssh. There is an open PR to update openssh; when merged, this symbol can be safely removed. Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [refresh patches]
* mac80211: rt2x00: import and update pending patchesDaniel Golle2019-03-1212-5/+192
| | | | | | | | | | | Imported from patchwork, patches marked with '=' have already been in our tree: [v3,1/4] cfg80211: add ratelimited variants of err and warn [v3,2/4] rt2x00: use ratelimited variants dev_warn/dev_err [v3,3/4] rt2x00: check number of EPROTO errors =[v3,4/4] rt2x00: do not print error when queue is full Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: Enable seccomp for powerpcWojciech Dubowik2019-03-111-4/+4
| | | | Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
* uboot-envtools: ramips: add support for ALFA Network Tube-E4GPiotr Dymacz2019-03-111-1/+2
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* busybox: add missing install dirHans Dedecker2019-03-111-1/+2
| | | | | | | | Add missing /usr/sbin install dir fixing : install: cannot create regular file 'build_dir/target-x86_64_musl/busybox-1.30.1/.pkgdir/busybox/usr/sbin/ntpd-hotplug': No such file or directory Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* nghttp2: bump to 1.37.0Hans Dedecker2019-03-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | cfb47d30 Take into account larger frame size for prioritization dbbe4e01 Remove unused field 371bc3a8 clang-format 5e7889c5 Update manual pages b1b2ad50 Bump up version number to 1.37.0, LT revision to 31:2:17 e043ca83 Update AUTHORS c2434dfb Simplify stream_less 816ad210 Reuse name when indexing header by referencing dynamic table f5feb16e Merge pull request #1295 from bratkartoffel/fix-compile-boringssl adf09f21 Merge pull request #1303 from donny-dont/fix-shared-install 2591960e Explicitly set install location when building shared libs d93842db nghttpx: Fix backend stall if header and request body are sent in 2 packets 8dc2b263 nghttpx: Use std::priority_queue 8d842701 Update manual pages de85b0fd Update README 5d6beed5 Merge branch 'nghttpx-backend-weight' 1ff9de4c nghttpx: Backend address selection with weight 34482ed4 Fix compilation with boringssl 9b6ced66 Bump up version number to 1.37.0-DEV Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* linux-atm: Fix compile problem with kernel 4.20Hauke Mehrtens2019-03-101-0/+52
| | | | | | | | | | | | | | | | This fixes the following compile problem with kernel 4.20: In file included from arp.c:20:0: include/linux/if_arp.h:121:16: error: 'IFNAMSIZ' undeclared here (not in a function) char arp_dev[IFNAMSIZ]; ^~~~~~~~ make[7]: *** [Makefile:459: arp.o] Error 1 This is caused by commit 6a12709da354 ("net: if_arp: use define instead of hard-coded value") in the upstream Linux kernel which is integrated in Linux 4.20. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* wolfssl: fix build in busybox environmentsMoritz Warning2019-03-102-2/+25
| | | | | | The configure script broke when used in alpine-3.9 based docker containers. Fixed in wolfSSL >3.15.7. Signed-off-by: Moritz Warning <moritzwarning@web.de>
* ltq-atm/ltq-ptm: re-enable/fix reset_ppe() functionality for VR9Martin Schiller2019-03-1014-65/+181
| | | | | | | | | | | | | | | This patch re-enables the reset_ppe() functionality for VR9 targets by using the new lantiq rcu subsystem. The reset sequence in the reset_ppe() function was taken from the ppa datapath driver of lantiq UGW 7.4.1. Additionally it adds the required reset definitions to the vr9 dtsi file. It also prepares the reset_ppe() function calls for the other lantiq targets. This feature is needed to be able to switch between ltq-atm/ltq-ptm driver in ATM/PTM Auto-Mode at runtime. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* fritz-tools: add fritz_tffs_nand_read toolAndy Binder2019-03-103-1/+581
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A tool for reading the TFFS partitions (a name-value storage usually found in AVM Fritz!Box based devices) on nand flash. Copyright (c) 2018 Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.DE> Based on the fritz_tffs_read tool: Copyright (c) 2015-2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com> and on the TFFS 2.0 kernel driver from AVM: Copyright (c) 2004-2007 AVM GmbH <fritzbox_info@avm.de> and the TFFS 3.0 kernel driver from AVM: Copyright (C) 2004-2014 AVM GmbH <fritzbox_info@avm.de> and the OpenWrt TFFS kernel driver: Copyright (c) 2013 John Crispin <blogic@openwrt.org> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.de> Signed-off-by: Andy Binder <AndyBinder@gmx.de>
* sunxi: add support for Orange Pi PC PlusAleksander Jan Bajkowski2019-03-091-0/+7
| | | | | | | | | | | | | | | | | CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.2 Ghz GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0) Memory: 1GB DDR3 (shared with GPU) Onboard: Storage TF card (Max. 64GB) / MMC card slot Onboard: Storage 8 GB eMMC Onboard: Network 10/100M Ethernet RJ45 Onboard: Network WiFi 802.11 b/g/n (Realtek RTL8189FTV) Onboard header: SPI, I2C, GPIO, UART USB 2.0: Three USB 2.0 HOST, One USB 2.0 OTG Known issues: -Wifi diesn't work Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* openssl: backport devcrypto changes from masterEneas U de Queiroz2019-03-099-25/+3678
| | | | | | | | | | | | | | | | | | | The patches to the /dev/crypto engine were commited to openssl master, and will be in the next major version (3.0). Changes: - Optimization in computing a digest in one operation, saving an ioctl - Runtime configuration options for the choice of algorithms to use - Command to dump useful information about the algorithms supported by the engine and the system. - Build the devcrypto engine as a dynamic module, like other engines. The devcrypto engine is built as a separate package by default, but options were added to allow building the engines into the main library. Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com> [refresh patches] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* 6to4: update OpenWrt documentation URLVieno Hakkerinen2019-03-091-1/+1
| | | | Signed-off-by: Vieno Hakkerinen <txt.file@txtfile.eu>
* uboot-envtools: ath79: add support for YunCore A770Piotr Dymacz2019-03-091-1/+2
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ipq-wifi: update ALFA Network AP120C-AC board-2.binPiotr Dymacz2019-03-081-0/+0
| | | | | | | Add specific 'variant' for 'bus=ahb,bmi-chip-id=0,bmi-board-id=25' BDF. Use the same value ('ALFA-Network-AP120C-AC') as sent upstream. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ucert: add PROVIDES also for minimal 'ucert' packageDaniel Golle2019-03-081-0/+1
| | | | | | | Otherwise ucert-full gets selected instead of ucert when depending on ucert. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mt76: update to the latest versionFelix Fietkau2019-03-071-3/+3
| | | | | | | | 1d7760d mt76: mt7603: set moredata flag when queueing ps-filtered packets 0b927b2 mt76: fix return value check in mt76_wmac_probe() e72376d mt76x02: fix hdr pointer in write txwi for USB Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: limit available channels via DTDavid Bauer2019-03-061-0/+39
| | | | | | | | | | | | | | | This backports upstream commit 34d5629 ath10k: limit available channels via DT ieee80211-freq-limit to the 4.19 ath10k-ct version. Without this patch, disabled channels are still listed as a supported configuration for the radio. The identical patch was also backported by OpenWRT to the non-ct driver. It can be dropped as soon as we switch to an ath10k-ct version based on 4.20 or higher. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath10k-firmware: update Candela Tech firmware imagesMichael Yartys2019-03-061-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Release notes since last update: wave-1 firmware: * Feb 14, 2019: Remove logic that causes assert when swba logic is not initialized. This was seen when trying to bring up 6 VAP vdevs. A similar fix went into wave-2 firmware some time ago. * Feb 27, 2019: Support up to 32 vAP vdevs, fix stack corruption when driver requests too many vAP. * Feb 28, 2019: Support beacon-tx-wmi callback message. This lets driver properly clean up beacon buffers so we don't crash (somethings the entire OS/system) due to DMA errors. wave-2 firmware: * Feb 27. 2019: Support up to 32 AP vdevs. Previous to this, stack would be corrupted if you went past 16 AP vdevs. * Feb 28, 2019: Support beacon-tx-wmi callback message. This lets driver properly clean up beacon buffers. In wave-1, this could crash the entire OS, but I didn't see the same crashes in wave-2, so maybe it is fixed in some other way. Add the feature regardless as it seems proper. Signed-off-by: Michael Yartys <michael.yartys@gmail.com>
* ath10k-ct: Update to 2019-02-28Michael Yartys2019-03-0610-53/+53
| | | | | | | | | 9360f389234a ath10k: Support up to 24 vAP per radio, fix DMA bug in wave-1. 9cbf8d430974 ath10k-ct: Add 4.20 driver, SGI support for fixed-rate tx. Runtime tested on: ipq806x Signed-off-by: Michael Yartys <michael.yartys@gmail.com>
* uqmi: inherit firewall zone membership to virtual sub interfacesJo-Philipp Wich2019-03-052-0/+20
| | | | | | | | | Fix an issue where subinterfaces were not added to the same firewall zone as their parent. Fixes: FS#2122 Signed-off-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mac80211: rt2x00: do not increment sequence number while re-transmittingVijayakumar Durai2019-03-051-0/+55
| | | | | | | | | | | Currently STA+AP re-transmitting the management frames with incremented sequence number if hardware is assigning the sequence. Fix is to assign the sequence number for Beacon by hardware and for other Management frames software will assign the sequence number Signed-off-by: Vijayakumar Durai <vijayakumar.durai1@vivint.com>
* mt76: update to the latest versionFelix Fietkau2019-03-031-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | 3c6df9b mt76: rewrite dma descriptor base and ring size on queue reset 30e757e mt76: mt76x02: when setting a key, use PN from mac80211 fa83406 mt76: mt76x2: implement full device restart on watchdog reset ead881b mt76: mt76x02: do not sync PN for keys with sw_iv set ba1d989 mt76: mmio: move mt76x02_set_irq_mask in mt76 module 283ebbe mt76: dma: move mt76x02_init_{tx,rx}_queue in mt76 module b216d3c mt76: introduce q->stopped parameter 8b437d2 mt76x02: clear sta and vif driver data structures on add 2c62d03 mt76x02: clear running flag when resetting state on restart 6b10cfc mt76: mt76x02: only update the base mac address if necessary 669bc49 mt76: mt76x02: reduce false positives in ED/CCA tx blocking 2ed9382 mt76: mt7603: fix tx status HT rate validation d2c6823 mt76: mt76x2: fix external LNA gain settings 8ee2259 mt76: mt76x2: fix 2.4 GHz channel gain settings 8bfe6d4 mt76: mt7603: clear ps filtering mode before releasing buffered frames d13b065 mt76: mt7603: fix up hardware queue index for PS filtered packets eb1ecc4 mt76: mt7603: notify mac80211 about buffered frames in ps queue 3687eec mt76: mt7603: clear the service period on releasing PS filtered packets 42ab27e mt76: when releasing PS frames, end the service period if no frame was found 461f3b0 mt76: mt76x02: disable ED/CCA by default Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: Activate DRIVER_11W_SUPPORT for more capable driversHauke Mehrtens2019-03-036-9/+9
| | | | | | | | | | ieee80211w support is only activated in hostapd when at least one capable driver is build into the image. Many drivers which are capable of ieee80211 (MFP) and have the MFP_CAPABLE set in the driver are still missing the DRIVER_11W_SUPPORT dependency. Add this to more driver capable of ieee80211w. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ltq-vdsl-fw: update download URLDaniel Golle2019-03-023-6/+6
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* iwinfo: update to latest gitDaniel Golle2019-03-011-3/+3
| | | | | | | | b514490 iwinfo: add device id for MediaTek MT7603E e9e1400 iwinfo: more Ralink and MediaTek WiSoC and PCIe chips cb108c5 iwinfo: fix capitalization of vendor name Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: add a fix to prevent unsafe queue wake calls during restartFelix Fietkau2019-03-011-0/+33
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport tx queue start/stop fixFelix Fietkau2019-03-016-15/+287
| | | | | | Among other things, it fixes a race condition on calling ieee80211_restart_hw Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libubox: bump to version 2019-02-27Yousong Zhou2019-03-011-4/+4
| | | | | | | | | | Contains the following change eeef7b5 blobmsg_json: blobmsg_format_string: do not escape '/' Resolves FS#2147 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* busybox: sync Config.in filesYousong Zhou2019-03-0125-825/+1225
| | | | | | | | | | | | | | The change was made with the following commands cd package/utils/busybox/config ../convert_menuconfig.pl ~/git-repo/openwrt/openwrt/build_dir/target-mips_24kc_musl/busybox-1.30.1 convert_defaults.pl has no changes other than overwriting defaults for BUSYBOX_DEFAULT_FEATURE_IPV6 Resolves FS#2146 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* busybox: unindent busybox Config.inYousong Zhou2019-03-0124-2267/+2267
| | | | | | | | | | | | | This is to align with upstream change 72089cf ("config: deindent all help texts") and to make the follow-up change syncing Config.in files with current busybox version more reviewable It was made with the following commands cd package/utils/busybox/config find . -name 'Config.in' | xargs sed -ir -e 's/^\t \([^ ]\)/\t\1/' Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* mac80211: rt2x00: cleanup ePA, RXIQ and TX-LOFT codeDaniel Golle2019-03-014-230/+84
| | | | | | | | | | consolidate patch 651-rt2x00-remove-unneccesary-code.patch. fixup the most obvious whitespace problems in RXIQ and TX-LOFT code. always backup registers bbpr1, bbpr4, bbpr241 and bbpr242 to avoid compiler warning about them being potentially uninitialized. no functional changes (intended) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: patch tracking cosmeticsDaniel Golle2019-03-019-0/+27
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-envtools: oxnas: sync with current oxnas/ox820 DTSDaniel Golle2019-03-011-5/+4
| | | | | | | | | Use tested values on shuttle,kd20 and assumed values for mitrastar,stg-212 and cloudengines,pogoplug*. akitio users have yet to report back stock flash layout to support vendor bootloader environment there as well. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* package/ncurses: change AR options to fix reproducible buildsAlexander Couzens2019-02-282-1/+23
| | | | | | | | | | ar has a deterministic (-D) and non-deterministic (-U) mode. OpenWrt is already using the deterministic mode by default, but ncurses' configure script force this to be non-deterministic. Since autoreconf fails to generate a new configure, the configure script is directly modified. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ipq40xx: add support for FritzBox 7530David Bauer2019-02-283-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Qualcomm IPQ4019 RAM: 256M FLASH: 128M NAND ETH: QCA8075 VDSL: Intel/Lantiq VRX518 PCIe attached currently not supported DECT: Dialog SC14448 currently not supported WiFi2: IPQ4019 2T2R 2SS b/g/n WiFi5: IPQ4019 2T2R 2SS n/ac LED: - Power/DSL green - WLAN green - FON/DECT green - Connect/WPS green - Info green - Info red BTN: - WLAN - FON - WPS/Connect UART: 115200n8 3.3V (located under the Dialog chip) VCC - RX - TX - GND (Square is VCC) Installation ------------ 1. Grab the uboot for the Device from the 'u-boot-fritz7530' subdirectory. Place it in the same directory as the 'eva_ramboot.py' script. It is located in the 'scripts/flashing' subdirectory of the OpenWRT tree. 2. Assign yourself the IP address 192.168.178.10/24. Connect your Computer to one of the boxes LAN ports. 3. Connect Power to the Box. As soon as the LAN port of your computer shows link, load the U-Boot to the box using following command. > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz7530.bin 4. The U-Boot will now start. Now assign yourself the IP address 192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP server root directory and rename it to 'FRITZ7530.bin'. 5. The Box will now boot OpenWRT from RAM. This can take up to two minutes. 6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using scp. SSH into the Box and first write the Bootloader to both previous kernel partitions. > mtd write /path/to/uboot-fritz7530.bin uboot0 > mtd write /path/to/uboot-fritz7530.bin uboot1 7. Remove the AVM filesystem partitions to make room for our kernel + rootfs + overlayfs. > ubirmvol /dev/ubi0 --name=avm_filesys_0 > ubirmvol /dev/ubi0 --name=avm_filesys_1 8. Flash OpenWRT peristently using sysupgrade. > sysupgrade -n /path/to/openwrt-sysupgrade.bin Signed-off-by: David Bauer <mail@david-bauer.net> [removed pcie-dts range node, refreshed on top of AP120-AC/E2600AC] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* uboot-fritz4040: bump version to 2019-02-08David Bauer2019-02-281-5/+6
| | | | | | | Adds support for the AVM FRITZ!Box 7530. Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [PKG_RELEASE]
* ipq40xx: add support for Qxwlan E2600AC C1 and C2张鹏2019-02-282-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Qxwlan E2600AC C1 based on IPQ4019 Specifications: SOC: Qualcomm IPQ4019 DRAM: 256 MiB FLASH: 32 MiB Winbond W25Q256 ETH: Qualcomm QCA8075 WLAN: 5G + 5G/2.4G * 2T2R 2.4/5 GHz - QCA4019 hw1.0 (SoC) * 2T2R 5 GHz - QCA4019 hw1.0 (SoC) INPUT: Reset buutton LED: 1x Power ,6 driven by gpio SERIAL: UART (J5) UUSB: USB3.0 POWER: 1x DC jack for main power input (9-24 V) SLOT: Pcie (J25), sim card (J11), SD card (J51) Flash instruction (using U-Boot CLI and tftp server): - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "sysupgrade" filename to "firmware.bin" and place it in tftp server directory. - Connect PC with one of RJ45 ports, power up the board and press "enter" key to access U-Boot CLI. - Use the following command to update the device to OpenWrt: "run lfw". Flash instruction (using U-Boot web-based recovery): - Configure PC with static IP 192.168.1.xxx(2-254)/24. - Connect PC with one of RJ45 ports, press the reset button, power up the board and keep button pressed for around 6-7 seconds, until LEDs start flashing. - Open your browser and enter 192.168.1.1, select "sysupgrade" image and click the upgrade button. Qxwlan E2600AC C2 based on IPQ4019 Specifications: SOC: Qualcomm IPQ4019 DRAM: 256 MiB NOR: 16 MiB Winbond W25Q128 NAND: 128MiB Micron MT29F1G08ABAEAWP ETH: Qualcomm QCA8075 WLAN: 5G + 5G/2.4G * 2T2R 2.4/5 GHz - QCA4019 hw1.0 (SoC) * 2T2R 5 GHz - QCA4019 hw1.0 (SoC) INPUT: Reset buutton LED: 1x Power, 6 driven by gpio SERIAL: UART (J5) USB: USB3.0 POWER: 1x DC jack for main power input (9-24 V) SLOT: Pcie (J25), sim card (J11), SD card (J51) Flash instruction (using U-Boot CLI and tftp server): - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "ubi" filename to "ubi-firmware.bin" and place it in tftp server directory. - Connect PC with one of RJ45 ports, power up the board and press "enter" key to access U-Boot CLI. - Use the following command to update the device to OpenWrt: "run lfw". Flash instruction (using U-Boot web-based recovery): - Configure PC with static IP 192.168.1.xxx(2-254)/24. - Connect PC with one of RJ45 ports, press the reset button, power up the board and keep button pressed for around 6-7 seconds, until LEDs start flashing. - Open your browser and enter 192.168.1.1, select "ubi" image and click the upgrade button. Signed-off-by: 张鹏 <sd20@qxwlan.com> [ added rng node. whitespace fixes, ported 02_network, ipq-wifi Makefile, misc dts fixes, trivial message changes ] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* wireguard: bump to 0.0.20190227Jason A. Donenfeld2019-02-281-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * wg-quick: freebsd: allow loopback to work FreeBSD adds a route for point-to-point destination addresses. We don't really want to specify any destination address, but unfortunately we have to. Before we tried to cheat by giving our own address as the destination, but this had the unfortunate effect of preventing loopback from working on our local ip address. We work around this with yet another kludge: we set the destination address to 127.0.0.1. Since 127.0.0.1 is already assigned to an interface, this has the same effect of not specifying a destination address, and therefore we accomplish the intended behavior. Note that the bad behavior is still present in Darwin, where such workaround does not exist. * tools: remove unused check phony declaration * highlighter: when subtracting char, cast to unsigned * chacha20: name enums * tools: fight compiler slightly harder * tools: c_acc doesn't need to be initialized * queueing: more reasonable allocator function convention Usual nits. * systemd: wg-quick should depend on nss-lookup.target Since wg-quick(8) calls wg(8) which does hostname lookups, we should probably only run this after we're allowed to look up hostnames. * compat: backport ALIGN_DOWN * noise: whiten the nanoseconds portion of the timestamp This mitigates unrelated sidechannel attacks that think they can turn WireGuard into a useful time oracle. * hashtables: decouple hashtable allocations from the main device allocation The hashtable allocations are quite large, and cause the device allocation in the net framework to stall sometimes while it tries to find a contiguous region that can fit the device struct. To fix the allocation stalls, decouple the hashtable allocations from the device allocation and allocate the hashtables with kvmalloc's implicit __GFP_NORETRY so that the allocations fall back to vmalloc with little resistance. * chacha20poly1305: permit unaligned strides on certain platforms The map allocations required to fix this are mostly slower than unaligned paths. * noise: store clamped key instead of raw key This causes `wg show` to now show the right thing. Useful for doing comparisons. * compat: ipv6_stub is sometimes null On ancient kernels, ipv6_stub is sometimes null in cases where IPv6 has been disabled with a command line flag or other failures. * Makefile: don't duplicate code in install and modules-install * Makefile: make the depmod path configurable * queueing: net-next has changed signature of skb_probe_transport_header A 5.1 change. This could change again, but for now it allows us to keep this snapshot aligned with our upstream submissions. * netlink: don't remove allowed ips for new peers * peer: only synchronize_rcu_bh and traverse trie once when removing all peers * allowedips: maintain per-peer list of allowedips This is a rather big and important change that makes it much much faster to do operations involving thousands of peers. Batch peer/allowedip addition and clearing is several orders of magnitude faster now. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* openssl: bump to release 1.1.1bEneas U de Queiroz2019-02-279-643/+5
| | | | | | | | | | | This is bugfix release that incorporated all of the devcrypto engine patches currently in the tree. The cleaning procedure in Package/Configure was not removing the dependency files, causing linking errors during a rebuild with different options. It was replaced by a simple make clean. Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
* odhcpd: update to latest git HEADHans Dedecker2019-02-271-3/+3
| | | | | | 16c5b6c ubus: always trigger an update if interface is not found Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* omcproxy: define configuration fileDavid Santamaría Rogado2019-02-271-1/+5
| | | | | | | omcproxy's configuration is lost on every update or installation. Avoid it by defining the configuration file. Signed-off-by: David Santamaría Rogado <howl.nsp@gmail.com>
* Revert "iw: compile with LTO enabled"Mantas Pucka2019-02-261-3/+2
| | | | | | | | | | | | | After update to 5.0.1 iw-full package failed to display command list on ipq40xx arch. Root cause was found to be LTO reordering causing incorrect detection of command struct size in: iw.c:552 cmd_size = labs((long)&__section_set - (long)&__section_get); This reverts commit ef16a394d2b24a363b50b5b4720cb23fe156c9da. Signed-off-by: Mantas Pucka <mantas@8devices.com>
* strace: update to version 2.26Hauke Mehrtens2019-02-263-3/+94
| | | | | | The new patch is a backport from current strace master. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>