aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* gdb: disable simulator ; it's broken on ppcAlexandru Ardelean2017-06-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Error is: ``` ompile-loc2c.o compile-c-support.o inflow.o init.o \ ../sim/ppc/libsim.a -lreadline ../opcodes/libopcodes.a ../bfd/libbfd.a -L./../zlib -lz ../libiberty/libiberty.a ../libdecnumber/libdecnumber.a -lncurses -lm ../libiberty/libiberty.a build-gnulib/import/libgnu.a -ldl -Wl,--dynamic-list=./proc-service.list ../sim/ppc/libsim.a(idecode.o): In function `update_time_from_event': idecode.c:(.text+0x170): undefined reference to `error' ../sim/ppc/libsim.a(idecode.o): In function `event_queue_tick': idecode.c:(.text+0x1cc): undefined reference to `error' idecode.c:(.text+0x28c): undefined reference to `error' idecode.c:(.text+0x318): undefined reference to `error' ../sim/ppc/libsim.a(idecode.o): In function `cpu_halt.constprop.6': idecode.c:(.text+0x398): undefined reference to `error' ../sim/ppc/libsim.a(idecode.o):idecode.c:(.text+0x4e4): more undefined references to `error' follow collect2: error: ld returned 1 exit status Makefile:1420: recipe for target 'gdb' failed make[5]: *** [gdb] Error 1 ``` Seems others are running into this as well. The problem seems to be that some code may be built as C++ and not C, which may explain the linker error. On this thread reply: https://sourceware.org/ml/gdb/2016-11/msg00045.html it mentions that the simulator should not call GDB's "error" function directly, but rather use the "host_callback" struct. I have no idea about the use of the GDB simulator within the OpenWrt/LEDE community. So, I took the easier route, which is to disable the simulator. (Also suggested here: https://sourceware.org/ml/gdb/2016-11/msg00047.html ) If needed, I can make an effort to fix the simulator for PPC. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* gdb: remove Build/Compile rule ; default one worksAlexandru Ardelean2017-06-071-7/+0
| | | | Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* package/grub2: update to 2.02Alif M. Ahmad2017-06-071-6/+3
| | | | | | Update to version 2.02 Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
* mac80211: use KERNEL_MAKEOPTSFelix Fietkau2017-06-072-6/+12
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: add KERNEL_MAKE and KERNEL_MAKE_FLAGS variables and move to kernel.mkFelix Fietkau2017-06-072-2/+2
| | | | | | | | This allows packages to use kernel make options without the forced -C $(LINUX_DIR). It also makes it more clear that it to be called from kernel module packages directly. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* perf: Depend on KERNEL_PERF_EVENTSFlorian Fainelli2017-06-051-1/+1
| | | | | | | | | | | | | | | | | | | | The kernel needs to have PERF_EVENTS built otherwise we will run into the following: root@(none):/# perf top perf_event_open(..., PERF_FLAG_FD_CLOEXEC) failed with unexpected error 89 (Function not implemented) perf_event_open(..., 0) failed unexpectedly with error 89 (Function not implemented) Error: The sys_perf_event_open() syscall returned with 89 (Function not implemented) for event (cycles). /bin/dmesg may provide additional information. No CONFIG_PERF_EVENTS=y kernel support configured? Make sure this functional dependency is captured. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* mdadm: Do not check RUN_DIRFlorian Fainelli2017-06-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Fixes build failure on hosts that do not have mdadm installed/configured: make[3]: Entering directory `/local/users/fainelli/openwrt/trunk/build_dir/target-mipsel-linux-gnu_glibc/mdadm-4.0' ***** Parent of /run/mdadm does not exist. Maybe set different RUN_DIR= ***** e.g. make RUN_DIR=/dev/.mdadm ***** or set CHECK_RUN_DIR=0 make[3]: *** [check_rundir] Error 1 make[3]: Leaving directory `/local/users/fainelli/openwrt/trunk/build_dir/target-mipsel-linux-gnu_glibc/mdadm-4.0' make[2]: *** [/local/users/fainelli/openwrt/trunk/build_dir/target-mipsel-linux-gnu_glibc/mdadm-4.0/.built] Error 2 make[2]: Leaving directory `/local/users/fainelli/openwrt/trunk/package/utils/mdadm' make[1]: *** [package/utils/mdadm/compile] Error 2 make[1]: Leaving directory `/local/users/fainelli/openwrt/trunk' make: *** [package/mdadm/compile] Error 2 Fixes: 980c41f8e04f ("utils/mdadm: Update to 4.0") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* lantiq: fix lantiq_mei.c and amazonse.dsti for adsl modem firmwareTino Reichardt2017-06-031-31/+29
| | | | | | | | | | | The ltq-adsl-mei package is used for 3 lantiq device types: danube, amazon-se and ar9. These different SoC's need also different definitions. Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de> [fix LTQ_USB_OC_INT for AR9 to match documentation] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: fix ifxmips_atm_amazon_se.cTino Reichardt2017-06-031-8/+0
| | | | | | Remove 6 defines, which were defined already some lines above. Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de>
* kernel: properly package 8250 serial PCI moduleDaniel Golle2017-06-031-4/+7
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Lantiq: make possible to tweak DSL SRN from UCIAndrea Merello2017-06-031-1/+26
| | | | | | | | | | | | | | | | | | | | | This patch makes possible to tweak the downstream SNR margin on Lantiq DSL devices. The UCI parameter 'network.dsl.ds_snr_offset' is used to set the SNR margin offset. It accepts values in range -50 to +50 in 0.1 dB units. The SNR margin can thus be modified in range -5.0 to +5.0 dB in 0.1 dB steps. Currently this should only affect ADSL (not VDSL). It should be very easy to make this work also on VDSL lines, but since I couldn't test on VDSL lines this patch does not do that yet. I have also a patch for LUCI about this, that I could submit. Tested on FB3370 (Lantiq VR9) and Telecom Italia ADSL2+ line. Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
* umdns: remove superfluous include in init scriptJo-Philipp Wich2017-06-021-2/+0
| | | | | | | | | | | | | The umdns init script includes function/network.sh globally, outside of any service procedure. This causes init script activation to fail in buildroot and IB context if umdns is set to builtin. Additionally, the network.sh helper is not actually used. Drop the entire include in order to repair init script activation in build host context. Fixes FS#658. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* dnsmasq: bump to 2.77Kevin Darbyshire-Bryant2017-06-011-4/+4
| | | | | | Bump to the 2.77 release after quite a few test & release candidates. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* mvebu: fix sysupgradeMatthias Schiffer2017-06-011-1/+1
| | | | | | | | | | | | | | | | | mvebu was modifying RAMFS_COPY_BIN and RAMFS_COPY_DATA from a sysupgrade_pre_upgrade hook. As the ramfs is created from stage2, this did not have an effect anymore after the staged sysupgrade changes. As it doesn't really hurt to copy fw_printenv and fw_setenv unconditionally, simply add them in /lib/upgrade/platform.sh, so stage2 will see them. Config copying is moved to a function called by platform_copy_config, where it belongs. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Fixes: FS#821 Fixes: 30f61a34b4cf "base-files: always use staged sysupgrade"
* ppp: propagate master firewall zone to dynamic slave interfaceHans Dedecker2017-05-312-1/+4
| | | | | | | | | | Assign the virtual DHCPv6 interface the firewall zone of the parent interface so fw3 knows the zone to which the virtual DHCPv6 interface belongs. This guarantees the firewall settings are applied correctly for the virtual DHCPv6 interface and allows to query the zone to which the virtual DHCPv6 interface belongs via the fw3 network option. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* usbmode: remove devices with unsupported modesJulian Labus2017-05-311-2/+7
| | | | | | | remove files which include the following mode options BlackberryMode OptionMode PantechMode QuantaMode Signed-off-by: Julian Labus <julian@labus-online.de>
* base-files: nand: use CI_KERNPART whenever the kernel volume is neededChristian Lamparter2017-05-311-4/+4
| | | | | | | | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. This patch is in continuation of: commit 93aa86040523 "procd: nand: make it possible to configure kernel and ubi partition" The $CI_KERNPART variable should be used in place of the fixed "kernel" partition name. This allows targets to specifiy alternate names for the kernel partition. Cc: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
* uboot-lantiq/spl: fixed uninitialized variable len in spl_uncompress_lzoMartin Schiller2017-05-312-4/+7
| | | | | | This fix is taken from uboot-lantiq v2014.07 (Daniel Schwierzeck) Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* uboot-lantiq: Support newer versions of the PEF7071 ethernetMartin Schiller2017-05-311-1/+1
| | | | | | This fix is taken from uboot-lantiq v2014.07 (Daniel Schwierzeck) Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* openvpn-easy-rsa: update to 3.0.1Luiz Angelo Daros de Luca2017-05-315-169/+26
| | | | | | | | | | | | | | | | | | | | | | easy-rsa v3 is now a single script. It expects a 'vars' configuration file which path can be set using easy-rsa options, environment variables or just looking in the current directory. The default usage would be: # cd /etc/easy-rsa # easy-rsa COMMAND [command-options] Following upstream changes, /etc/easy-rsa/pki replaces /etc/easy-rsa/keys directory. The default /etc/easy-rsa/pki dir is marked to be kept during upgrade (WARN: priv keys are saved in the system backup) /etc/easy-rsa/openssl.1.0.cnf is now marked as config file while index and serial got removed. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* mt76: update mirror hash after tar portablity fixFelix Fietkau2017-05-301-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: add support for EnGenius ENS202EXTMarty Plummer2017-05-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | EnGenius ENS202EXT is an outdoor wireless access point with 2-port 10/100 switch, detachable antennas and proprietery PoE. The device is based on Qualcomm/Atheros AR9341 v1. Specifications: - 535/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM - 16 MB of FLASH - UART (J1) header on PCB (unpopulated) - 2x 10/100 Mbps Ethernet - 2.4 GHz, up to 26dBm - 2x external, detachable antennas - 7x LED, 1x button Flash instructions: You have three options: - Use the vendor firmware upgrade page on the web interface and give it the factory.img. This is the easiest way to go about it. - If you have serial access during u-boot, interrupt the normal boot (any key before timeout) and run 'run failsafe_boot'; this will bring you to a minimal openwrt luci image on ip 192.168.1.1 useful if you've bricked the normal firmware. - Use the vendor's management cli, which can be accessed via telnet with the same credentials as the web login (default admin:admin), then issue the following commands: *** Hi admin, welcome to use cli(V-1.6.7) *** ---========= Commands Help =========--- stat -- Status sys -- System wless2 -- 2.4G-Wireless mgmt -- Management tree -- Tree help -- Help reboot -- Reboot ens202ext>mgmt Management ---========= Commands Help =========--- admin -- Administration mvlan -- Management VLAN settings snmp -- SNMP settings backup -- Backup/Restore settings autorb -- Auto reboot settings fwgrade -- Firmware upgrade time -- Time settings wifisch -- Wifi schedule log -- Log diag -- Diagnostics disc -- Device Discovery logout -- Logout help -- Help exit -- Exit ens202ext/mgmt>fwgrade Management --> Firmware upgrade ---========= Commands Help =========--- fwup -- Firmware upgrade help -- Help exit -- Exit ens202ext/mgmt/fwgrade>fwup http://web.server/lede-ar71xx-generic-ens202ext-squashfs-factory.bin Signed-off-by: Marty Plummer <ntzrmtthihu777@gmail.com>
* iproute2: bump to 4.11Kevin Darbyshire-Bryant2017-05-3016-529/+228
| | | | Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* u-boot-mvebu: clearfog: enable setexpr commandJosua Mayer2017-05-301-0/+28
| | | | Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
* u-boot-mvebu: clearfog: implement distro-bootJosua Mayer2017-05-305-49/+126
| | | | | | | Add a patchfile that implements distro-boot and is meant to go upstream Also make the other patches git-am'able for easier maintenance. Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
* u-boot-mvebu: update to 2017.03Josua Mayer2017-05-304-15/+26
| | | | Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
* mwlwifi: update to the latest versionAnsuel Smith2017-05-301-3/+3
| | | | Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* mt76: update to the latest version, fixes a mt7603 beacon issueFelix Fietkau2017-05-301-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* procd: update to latest git HEADMatthias Schiffer2017-05-301-3/+3
| | | | | | e7bb2c8 upgraded: define __GNU_SOURCE Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: add support for staged sysupgrades from failsafe modeMatthias Schiffer2017-05-293-10/+25
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: sysupgrade cleanupMatthias Schiffer2017-05-293-105/+102
| | | | | | | | | | | | Some functions only used by stage2 are moved there from common.sh. One piece that could still use more cleanup is platform_pre_upgrade: many targets reference files from there are aren't available in the ramfs, so we need to evaluate it before the switch; conversely, flash writes happen in that function on some targets. Targets that do the latter should be fixed eventually to use platform_do_upgrade for that purpose. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* fstools: snapshot: handle jffs2 conversion using upgradedMatthias Schiffer2017-05-292-7/+9
| | | | | | | We can reuse the kill_remaining and run_ramfs facilities of the stage2 run by upgraded. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* fstools: clean up trailing whitespace in snapshot scriptMatthias Schiffer2017-05-291-1/+1
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: always use staged sysupgradeMatthias Schiffer2017-05-294-148/+162
| | | | | | | | | | | Support for the -d and -p options is dropped; it may be added again at some point by adding these flags to the ubus sysupgrade call. A downside of this is that we get a lot less information about the progress of the upgrade: as soon as the actual upgrade starts, all shell sessions are killed to allow unmounting the root filesystem. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* procd: remove procd-nand packageMatthias Schiffer2017-05-294-61/+14
| | | | | | | | | | | We always want to support staged upgrades now, so it's better to include upgraded into the main package. /lib/upgrade/nand.sh is moved to base-files. The procd-nand-firstboot package is removed for now, it may return later as a separate package. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* procd: update to latest git HEADMatthias Schiffer2017-05-291-3/+3
| | | | | | | | | | | | | | | | 992b796 rcS: add missing fcntl.h include 63789e5 init: add support for sysupgrades triggered from preinit 5b1fb35 Remove code that has become unnecessary after sysupgrade changes 5918b6d upgraded: add support for passing a "command" argument to stage2 056d8dd upgraded: link dynamically, chroot during exec 7c6cf55 system: always support staged sysupgrade d42b21e procd/rcS: Use /dev/null as stdin e0098d4 service/instance: add an auto start option 1247db1 procd: Log initscript output prefixed with script name 8d720b2 procd: Don't use syslog before its initialization 2555474 procd: Add missing \n in debug message Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* procd: prepare NAND sysupgrade for making upgraded dynamically linkedMatthias Schiffer2017-05-291-2/+3
| | | | | | | | Use install_bin to copy upgraded with all dependencies. The old name /tmp/upgraded is temporarily retained as a symlink to avoid breaking things. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* procd: clean up trailing whitespace in nand.shMatthias Schiffer2017-05-291-2/+2
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mt76: update to the latest version, improves mt7603/7628 stabilityFelix Fietkau2017-05-291-4/+4
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* firewall: fix stray continue statementJo-Philipp Wich2017-05-271-4/+4
| | | | | | | The previous commit introduced a faulty continue statement which might lead to faulty rules not getting freed or reported. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* netifd: fix 6rd regression (FS#812)Hans Dedecker2017-05-271-3/+3
| | | | | | 08f1875 system-linux: fix 6rd regression Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* firewall: extend ubus support, exception handling, parse fixesJo-Philipp Wich2017-05-271-3/+3
| | | | | | | | | | | | | | | | | | | | | | | Update to latest Git HEAD in order to import a number of fixes and other improvements: 3d2c18a options: improve handling of negations when parsing space separated values 0e5dd73 iptables: support -i, -o, -s and -d in option extra 4cb06c7 ubus: increase ubus network interface dump timeout e5dfc82 iptables: add exception handling f625954 firewall3: add check_snat() function 7d3d9dc firewall3: display the section type for UBUS rules 53ef9f1 firewall3: add UBUS support for include scripts 5cd4af4 firewall3: add UBUS support for ipset sections 02d6832 firewall3: add UBUS support for forwarding sections 0a7d36d firewall3: add UBUS support for redirect sections d44f418 firewall3: add fw3_attr_parse_name_type() function e264c8e firewall3: replace warn_rule() by warn_section() 6039c7f firewall3: check the return value of fw3_parse_options() Fixes FS#548, FS#806, FS#811. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* samba: bump PKG_RELEASEJo-Philipp Wich2017-05-271-1/+1
| | | | | | | | | | | The previous CVE bugfix commit did not adjust PKG_RELEASE, therefor the fixed samba package does not appear as opkg update. Bump the PKG_RELEASE to signify upgrades to downstream users. Ref: https://forum.lede-project.org/t/sambacry-are-lede-devices-affected/3972/4 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Move enablemodem from ramips to new package adb-enablemodem and make it used ↵Filip Moc2017-05-272-0/+90
| | | | | | also by TL-MR6400 Signed-off-by: Filip Moc <lede@moc6.cz>
* usbmode: update usb-modeswitch-data to 20170205Julian Labus2017-05-271-2/+2
| | | | | | add support for new hardware Signed-off-by: Julian Labus <julian@labus-online.de>
* usbmode: update to latest versionJulian Labus2017-05-271-3/+3
| | | | | | 453da8e convert-modeswitch.pl: fix message indices Signed-off-by: Julian Labus <julian@labus-online.de>
* elfutils: Pass -Wno-unused-result to silence warnings as errorsFlorian Fainelli2017-05-261-1/+1
| | | | | | | | | | | | | | | | | | | elfutils turns on -Werror by default, and patch 100-musl-compat.patch changes how strerror_r is used and we no longer use the function's return value. This causes the following build error/warning to occur with glibc-based toolchains: dwfl_error.c: In function 'dwfl_errmsg': dwfl_error.c:158:18: error: ignoring return value of 'strerror_r', declared with attribute warn_unused_result [-Werror=unused-result] strerror_r (error & 0xffff, s, sizeof(s)); ^ cc1: all warnings being treated as errors Fixing this would be tricky as there are two possible signatures for strerror_r (XSI and GNU), just turn off unused-result warnings instead. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* dnsmasq: add dhcp-script hook for other packagesNick Brassel2017-05-263-5/+59
| | | | | | | | | | | | | Adds a script which acts as a hook for when dnsmasq creates/destroys a lease, or completes a TFTP file transfer. The hook loops through scripts in appropriate directories inside '/etc/hotplug.d', executing each one with the same arguments supplied by dnsmasq. In case dnsmasq is jailed by ujail the dhcp-script hook will not work as expected as ujail does not yet support executing a script within a jail. Signed-off-by: Nick Brassel <nick@tzarc.org> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* Revert "sysupgrade: run only one instance at a time."Jo-Philipp Wich2017-05-261-14/+0
| | | | | | | | | | | | | This reverts commit e96a9a9af82c00dcce606a84a7bb87a00411385d. The change breaks sysupgrade through LuCI and two-stage sysupgrade on NAND targets. There is also a mismatch of file paths in lock and unlock operations. This commit was apparently neither properly tested, nor reviewed, so drop it for now. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* iptables: fix typos in 600-shared-libext.patch (FS#711)Felix Fietkau2017-05-251-2/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 19:35:07 +0000