aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* busybox: drop providing virtual package ipHans Dedecker2018-03-221-1/+0
| | | | | | | | | | | | | | Drop providing the virtual package ip by busybox which was added in commit 1cec4d4ef0. Letting busybox provide the virtual package ip is not optimal for the following reasons : - Applications depending on ip expect either the ip-full or ip-tiny package to be enabled. - Busybox ip applet cannot be added or removed at runtime Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* firewall: update to latest git HEADHans Dedecker2018-03-221-3/+3
| | | | | | | | | 5cdf15e helpers.conf: add CT rtsp helper d5923f1 Reword rule comments c1a295a defaults: add support for xt_FLOWOFFLOAD rule 41c2ab5 ipsets: add support for specifying entries Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ath10k-firmware: Support CT IPQ4019 firmware.Ben Greear2018-03-221-3/+71
| | | | | | | Initial beta release of the CT IPQ4019 firmware. Features are similar to the CT 9984 firmware Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct: Force loading mac80211 and ath modules.Ben Greear2018-03-221-1/+1
| | | | | | | They are not automatically loaded on IPQ4019 (at least) machines for some reason. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct: update to latest version, enable AHB.Ben Greear2018-03-222-42/+8
| | | | | | | | | | | | | | | | The driver updates include: ath10k driver backport to fix WPA 'pn' related security bugs (4.13 based driver only currently), a fix for off-channel TX for CT wave-1 firmware, a likely fix for napi related crashes, and a backport of the firmware fetch patch. AHB is needed for the IPQ4019 platform radios. Signed-off-by: Ben Greear <greearb@candelatech.com> [use common subject format] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* intel-microcode: update to 20180312Zoltan HERPAI2018-03-211-3/+3
| | | | | | | | | | | | | | | | - Update microcode for 24 CPU types - Implements IBRS/IBPB/STIPB support, Spectre-v2 mitigation for: Sandybridge, Ivy Bridge, Haswell, Broadwell, Skylake, Kaby Lake, Coffee Lake - Missing production updates: - Broadwell-E/EX Xeons (sig 0x406f1) - Anniedale/Morefield, Apollo Lake, Avoton, Cherry Trail, Braswell, Gemini Lake, Denverton - New Microcodes: - sig 0x00050653, pf_mask 0x97, 2018-01-29, rev 0x1000140 - sig 0x00050665, pf_mask 0x10, 2018-01-22, rev 0xe000009 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: refresh patchesZoltan HERPAI2018-03-217-12/+12
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: fix build by adding comparabilities for old dtcHauke Mehrtens2018-03-211-0/+52
| | | | | | | | | We use the dtc from the kernel and that does not have all the options which u-boot would like to use now. make these parameters optional. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> [wigyori@uid0.hu: renamed to 221-compatible-old-dtc.patch from 220-] Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: bump again to 2017.11Zoltan HERPAI2018-03-2111-392/+36
| | | | | | | | | | | | | | | Runtime-tested on: - Pine64 (A64) - Orange Pi 2 (H3) - Bananapro (A20) - Olimex A20-Micro (A20) - Pcduino v3 (A20) - Pcduino v2 (A10) Compile-tested on: - all A8/A7/A53 boards Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* mac80211: backport brcmfmac fixes from 4.16Rafał Miłecki2018-03-218-3/+345
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* uboot-kirkwood: update to 2018.03Paul Wassi2018-03-2010-218/+120
| | | | | | | | | | | U-Boot now requires GCC > 5 Catch up with upstream and move some configuration options from the header files to the corresponding defconfig files. Also move some options of patch 010 affecting the whole platform to 010's device only. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* openvpn: remove deprecated config optionsHans Dedecker2018-03-202-8/+1
| | | | | | | | Remove deprecated config options in 2.5 as described in [0] [0] https://community.openvpn.net/openvpn/wiki/DeprecatedOptions Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mac80211: avoid changing skb truesize in A-MSDU aggregationFelix Fietkau2018-03-191-9/+1
| | | | | | Should fix recently reported data corruption issues Signed-off-by: Felix Fietkau <nbd@nbd.name>
* iproute2: fix hidden uint to uin64_t promotion in json_printKevin Darbyshire-Bryant2018-03-192-1/+66
| | | | | | | | | | | | | | | | | | | | | | | | | print_int used 'int' type internally, whereas print_uint used 'uint64_t' These helper functions eventually call vfprintf(fp, fmt, args) which is a variable argument list function and is dependent upon 'fmt' containing correct information about the length of the passed arguments. Unfortunately print_int v print_uint offered no clue to the programmer that internally passed ints to print_uint were being promoted to 64bits, thus the format passed in 'fmt' string vs the actual passed integer could be different lengths. This is even more interesting on big endian architectures where 'vfprintf' would be looking in the middle of an int64 type. Symptoms of this included tc qdisc showing bizarre values for a variety of fields across a variety of qdiscs (e.g. refcnt, flows, quantum) print_u/int now stick with native int size. A similar patch has been sent upstream. Fixes FS#1425 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: bump to 2.79 releaseKevin Darbyshire-Bryant2018-03-191-3/+3
| | | | | | | 94b6878 Tidy crypto.c of old library compat. Now need libnettle 3. 8b96552 Fix compiler warning. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* curl: Update to 7.59Rosen Penev2018-03-191-2/+2
| | | | | | Compile tested on ar71xx. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* firmware: add JBOOT based devices config extractorPawel Dembicki2018-03-184-0/+512
| | | | | | | Adds tool to extract MAC and pre-calibration data required for JBOOT based D-Link routers. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* ltq-vdsl-mei: Fix section mismatchHauke Mehrtens2018-03-181-0/+20
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ltq-deu: Fix section mismatchesHauke Mehrtens2018-03-188-42/+42
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* e2fsprogs: fix InstallDev recipeJo-Philipp Wich2018-03-181-1/+1
| | | | | | Create the correct bin directory before staging the host utilities. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mtd: fix compile warningsHauke Mehrtens2018-03-182-4/+4
| | | | | | | This callback should have one parameter less, this parameter is not used so this was not a so big problem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-mxs: fix compile problems related to OpenSSLHauke Mehrtens2018-03-172-1/+36
| | | | | | | | | | | | | | Use the UBOOT_MAKE_FLAGS defined in include/u-boot.mk and do not overwrite them to compile the host tools against the shipped LibreSSL. In addition add a patch to fix a compile problem when compiling the tools against LibreSSL caused by differences in the API between OpenSSL 1.1 and LibreSSL. This should fix the compile problems seen in build bot from time to time by not depending on the host libssl-dev package any more but using the LibreSSL version from OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-mxs: refresh patchesHauke Mehrtens2018-03-171-26/+0
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mwlwifi: Updated to upstream stable releaseGabe Rodriguez2018-03-172-95/+3
| | | | | | | | | | | mwlwifi was updated to a new stable. Included in this stable release are the followin benefits: - Fixed compiling for kernel 4.14 - Fixed crash on 88W8864 binary Compiled and tested on: WRT3200ACM and WRT1900AC Signed-off-by: Gabe Rodriguez <lifehacksback@gmail.com>
* openvpn: add config param verify_client_certChristian Bayer2018-03-172-1/+2
| | | | | | | | | Option --client-cert-not-required DEPRECATED is deprecated in v2.4 and removed in OpenVPN 2.5. Replaced by param --verify-client-cert none|optional|require in v2.4 see https://community.openvpn.net/openvpn/wiki/ DeprecatedOptions#a--client-cert-not-required Signed-off-by: Christian Bayer <cave@cavebeat.org> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_ RELEASE increase]
* ipq-wifi: add board-2.bin for ASUS RT-AC58UMathias Kresin2018-03-151-0/+0
| | | | | | | The existing file is 0 byte. Replace the ASUS RT-AC58U board-2.bin with the correct file. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq40xx: add Cisco Meraki MR33 SupportChris Blake2018-03-142-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for Cisco Meraki MR33 hardware highlights: SOC: IPQ4029 Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7 DRAM: 256 MiB DDR3L-1600 @ 627 MHz Micron MT41K128M16JT-125IT NAND: 128 MiB SLC NAND Spansion S34ML01G200TFV00 (106 MiB usable) ETH: Qualcomm Atheros AR8035 Gigabit PHY (1 x LAN/WAN) + PoE WLAN1: QCA9887 (168c:0050) PCIe 1x1:1 802.11abgn ac Dualband VHT80 WLAN2: Qualcomm Atheros QCA4029 2.4GHz 802.11bgn 2:2x2 WLAN3: Qualcomm Atheros QCA4029 5GHz 802.11a/n/ac 2:2x2 VHT80 LEDS: 1 x Programmable RGB+White Status LED (driven by Ti LP5562 on i2c-1) 1 x Orange LED Fault Indicator (shared with LP5562) 2 x LAN Activity / Speed LEDs (On the RJ45 Port) BUTTON: one Reset button MISC: Bluetooth LE Ti cc2650 PG2.3 4x4mm - BL_CONFIG at 0x0001FFD8 AT24C64 8KiB EEPROM Kensington Lock Serial: WARNING: The serial port needs a TTL/RS-232 3V3 level converter! The Serial setting is 115200-8-N-1. The board has a populated 1x4 0.1" header with half-height/low profile pins. The pinout is: VCC (little white arrow), RX, TX, GND. Flashing needs a serial adaptor, as well as patched ubootwrite utility (needs Little-Endian support). And a modified u-boot (enabled Ethernet). Meraki's original u-boot source can be found in: <https://github.com/riptidewave93/meraki-uboot/tree/mr33-20170427> Add images to do an installation via bootloader: 0. open up the MR33 and connect the serial console. 1. start the 2nd stage bootloader transfer from client pc: # ubootwrite.py --write=mr33-uboot.bin (The ubootwrite tool will interrupt the boot-process and hence it needs to listen for cues. If the connection is bad (due to the low-profile pins), the tool can fail multiple times and in weird ways. If you are not sure, just use a terminal program and see what the device is doing there. 2. power on the MR33 (with ethernet + serial cables attached) Warning: Make sure you do this in a private LAN that has no connection to the internet. - let it upload the u-boot this can take 250-300 seconds - 3. use a tftp client (in binary mode!) on your PC to upload the sysupgrade.bin (the u-boot is listening on 192.168.1.1) # tftp 192.168.1.1 binary put openwrt-ipq40xx-meraki_mr33-squashfs-sysupgrade.bin 4. wait for it to reboot 5. connect to your MR33 via ssh on 192.168.1.1 For more detailed instructions, please take a look at the: "Flashing Instructions for the MR33" PDF. This can be found on the wiki: <https://openwrt.org/toh/meraki/mr33> (A link to the mr33-uboot.bin + the modified ubootwrite is also there) Thanks to Jerome C. for sending an MR33 to Chris. Signed-off-by: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* base-files: add more name source to get_dt_led helper functionMathias Kresin2018-03-141-1/+4
| | | | | | | | Not all LED driver are using the label devicetree property for the led name. Add support for the TI/National Semiconductor LP55xx Led Drivers, which are using the chan-name property for the led name, as fallback. Signed-off-by: Mathias Kresin <dev@kresin.me>
* base-files: add function to get binary mac from fileMathias Kresin2018-03-141-6/+13
| | | | | | | Add a fucntion to get the a binary mac address from file. Use the new function for mtd_get_mac_binary() to limit duplicate code. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq40xx: add support for ASUS RT-AC58U/RT-ACRH13Christian Lamparter2018-03-142-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for ASUS RT-AC58U/RT-ACRH13. hardware highlights: SOC: IPQ4018 / QCA Dakota CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7 DRAM: 128 MiB DDR3L-1066 @ 537 MHz (1074?) NT5CC64M16GP-DI NOR: 2 MiB Macronix MX25L1606E (for boot, QSEE) NAND: 128 MiB Winbond W25NO1GVZE1G (cal + kernel + root, UBI) ETH: Qualcomm Atheros QCA8075 Gigabit Switch (4 x LAN, 1 x WAN) USB: 1 x 3.0 (via Synopsys DesignWare DWC3 controller in the SoC) WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2 INPUT: one Reset and one WPS button LEDS: Status, WAN, WIFI1/2, USB and LAN (one blue LED for each) Serial: WARNING: The serial port needs a TTL/RS-232 3V3 level converter! The Serial setting is 115200-8-N-1. The board has an unpopulated 1x4 0.1" header. The pinout (VDD, RX, GND, TX) is printed on the PCB right next to the connector. U-Boot Note: The ethernet driver isn't always reliable and can sometime time out... Don't worry, just retry. Access via the serial console is required. As well as a working TFTP-server setup and the initramfs image. (If not provided, it has to be built from the OpenWrt source. Make sure to enable LZMA as the compression for the INITRAMFS!) To install the image permanently, you have to do the following steps in the listed order. 1. Open up the router. There are four phillips screws hiding behind the four plastic feets on the underside. 2. Connect the serial cable (See notes above) 3. Connect your router via one of the four LAN-ports (yellow) to a PC which can set the IP-Address and ssh and scp from. If possible set your PC's IPv4 Address to 192.168.1.70 (As this is the IP-Address the Router's bootloader expects for the tftp server) 4. power up the router and enter the u-boot choose option 1 to upload the initramfs image. And follow through the ipv4 setup. Wait for your router's status LED to stop blinking rapidly and glow just blue. (The LAN LED should also be glowing blue). 3. Connect to the OpenWrt running in RAM The default IPv4-Address of your router will be 192.168.1.1. 1. Copy over the openwrt-sysupgrade.bin image to your router's temporary directory # scp openwrt-sysupgrade.bin root@192.168.1.1:/tmp 2. ssh from your PC into your router as root. # ssh root@192.168.1.1 The default OpenWrt-Image won't ask for a password. Simply hit the Enter-Key. Once connected...: run the following commands on your temporary installation 3. delete the "jffs2" ubi partition to make room for your new root partition # ubirmvol /dev/ubi0 --name=jffs2 4. install OpenWrt on the NAND Flash. # sysupgrade -v /tmp/openwrt-sysupgrade.bin - This will will automatically reboot the router - Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: ath10k: search all IEs for variant before falling backChristian Lamparter2018-03-142-0/+237
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the patch that was posted to ath10k-devel ML: <https://patchwork.kernel.org/patch/10233491/> |From: Thomas Hebb <tommyhebb@gmail.com> |Subject: [PATCH] ath10k: search all IEs for variant before falling back |Date: Wed, 21 Feb 2018 11:43:39 -0500 |[...] |This patch fixes the issue by first searching the entire file for the ID |with variant, and searching for the fallback ID only if that search |fails. It also includes some code cleanup in the area, as |ath10k_core_fetch_board_data_api_n() no longer does its own string |mangling to remove the variant from an ID, instead leaving that job to a |new flag passed to ath10k_core_create_board_name(). | |I've tested this patch on a QCA4019 and verified that the driver behaves |correctly for 1) both fallback and variant BDFs present, 2) only fallback |BDF present, and 3) no matching BDFs present. | |Fixes: 1657b8f84ed9 ("ath10k: search SMBIOS for OEM board file extension") |Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Note: 937-ath10k-calibration-variant.patch has been reassigned a new 081 number, as it now ships with upstream.... But also because this patch requires the change in ath10k_core_create_board_name(). Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx/ipq806x: move qcom-dwc3 usb driver to genericMathias Kresin2018-03-141-0/+36
| | | | | | | If the a kernel package exists within multiple targets an error/warning is shown. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq40xx: add targetJohn Crispin2018-03-146-7/+50
| | | | | | Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: John Crispin <john@phrozen.org>
* e2fsprogs: break out libcomerr/libss, FS#1310Andy Walsh2018-03-142-17/+117
| | | | | | | | | | | | | | | | | libext2fs breaks krb5 by always installing its own copies of libcom_err.so and libss.so. Move the libraries into separate libcomerr and libss packages respectively and add a host build recipe to stage the required compile_et and mk_cmds utilities for use by other packages. This allows the krb5 package to be fixed to use the system wide libcomerr and libss libraries. Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com> [rename libcom_err to libcomerr, make compile_et and mk_cmds relocatable, cleanup makefile, add dependency on host build, reword commit message] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* jsonfilter: update to latest git HEADJo-Philipp Wich2018-03-141-3/+3
| | | | | | | | c7e938d implement POSIX regexp support cd6629f lexer: fix encoding 7 bit escape sequences 8614470 main: implement array mode Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* dnsmasq: bump to 2.79rc2Hans Dedecker2018-03-131-2/+2
| | | | | | | | | | | | | | | | | | ae29065 Fix debian/changelog syntax. 6b2b564 Enhance --synth-domain to allow names with sequential integers. 4f7bb57 Fix deletion of dhcp-options from inotify dynamic files. 56f0623 Allow trailing dot in CNAME. f3223fb Fix nettle_hash() function to avoid ABI incompatibilities. 4c4f4c2 Debian dependency tweaking for new dnsmasq-base-lua package. 773af30 Man page typo fix. 4cc944b Merge branch 'master' of ssh://thekelleys.org.uk/var/local/git/dnsmasq 87e00fe Compiler warning fixes. e7a4af8 Compiler warning fixes. 2d69d61 Add liblua-dev to Debian build-depends. 30e4a94 Debian package: add dnsmasq-base-lua binary package. 232a8f3 Merge messages for release. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uboot-imx6: fix build with GCC 7Hauke Mehrtens2018-03-134-5/+1344
| | | | | | | | Backport the compiler support patches from upstream u-boot to this older version to make it compile with GCC 7. This was found by build bot. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* 6in4: support multiple additional user prefixesJo-Philipp Wich2018-03-132-6/+11
| | | | | | | | | | | | | | Support configuration in the form... list ip6prefix 2001:db8:1234::/64 list ip6prefix 2001:db8:5678::/64 ... to allow specifying multiple routed IPv6 prefixes. Implements feature request FS#1361. Signed-off-by: Jo-Philipp Wich <jo@mein.io> Acked-by: Hans Dedecker <dedeckeh@gmail.com>
* netifd: update to the latest version (fixes FS#1358)Felix Fietkau2018-03-131-3/+3
| | | | | | | | 1f5a29c ip: do not add local routes for host dependencies c06f842 device: add support for setting the isolate options for bridge ports 69aeaab interface-ip: fix route selection for host dependencies Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ppp: make ppp-multilink provide pppFelix Fietkau2018-03-121-9/+10
| | | | | | Fixes dependencies on ppp from other packages Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-fritz4040: fix build with gcc7Felix Fietkau2018-03-121-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* busybox: remove i386-specific build flagsMatthias Schiffer2018-03-121-0/+10
| | | | | | | | | | busybox tries to be smart and passes a number of additional flags to the compiler. Unfortunately, the i386-specific flags break ABI compatiblity with libc. Fixes busybox crashes observed on x86-generic with GCC 7. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mac80211: minstrel: make short preamble CCK available when not used at ↵Felix Fietkau2018-03-101-4/+12
| | | | | | | | | connect time The BSS short preamble state can change without rate control update notification. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix a tx queue memory accounting errorFelix Fietkau2018-03-101-0/+66
| | | | | | Fixes rare hard to trigger tx hangs after some time Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mvebu: Add subtarget for Cortex A9 buildHauke Mehrtens2018-03-101-0/+1
| | | | | | This is in preparation for adding a subtarget for the Cortex A53 later. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: add support for Turris OmniaRyan Mounce2018-03-101-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds support for the Turris Omnia and builds an eMMC sysupgrade image in the same format as the SolidRun ClearFog. An initramfs image in the simple yet Omnia-specific 'medkit' image format is also built in order to ease the initial flashing process. Notable hardware support omissions are support for switching between SFP cage and copper PHY, and RGB LED control. Due to a current limitation of DSA, only 1/2 CPU switch uplinks are used. Specifications: - Marvell Armada 385 1.6GHz dual-core ARMv7 CPU - 1GB DDR3 RAM - 8GB eMMC Flash - 5x Gigabit LAN via Marvell 88E6176 Switch (2x RGMII CPU ports) - 1x switchable RJ45 (88E1514 PHY) / SFP SGMII WAN - 2x USB 3.0 - 12x dimmable RGB LEDs controlled by independent MCU - 3x Mini PCIe slots - Optional Compex WLE200N2 Mini PCIe AR9287 2x2 802.11b/g/n (2.4GHz) - Optional Compex WLE900VX Mini PCIe QCA9880 3x3 802.11ac (2.4 / 5GHz) - Optional Quectel EC20 Mini PCIe LTE modem Flash instructions: If the U-Boot environment has been modified previously (likely manually via serial console), first use serial to reset the default environment. => env default -a => saveenv Method 1 - USB 'medkit' image w/o serial - Copy openwrt-mvebu-turris-omnia-sysupgrade.img.gz and omnia-medkit-openwrt-mvebu-turris-omnia-initramfs.tar.gz to the root of a USB flash drive formatted with FAT32 / ext2/3/4 / btrfs / XFS. Note that the medkit MUST be named omnia-medkit*.tar.gz - Disconnect other USB devices from the Omnia and connect the flash drive to either USB port. - Power on the Omnia and hold down the rear reset button until 4 LEDs are illuminated, then release. - Wait approximately 2 minutes for the Turris Omnia to flash itself with the temporary image, during which LEDs will change multiple times. - Connect a computer to a LAN port of the Turris Omnia with a DHCP client - (if necessary) ssh-keygen -R 192.168.1.1 - ssh root@192.168.1.1 $ mount /dev/sda1 /mnt $ sysupgrade /mnt/openwrt-mvebu-turris-omnia-sysupgrade.img.gz - Wait another minute for the final OpenWrt image to be flashed. The Turris Omnia will reboot itself and you can remove the flash drive. Method 2 - TFTP w/ serial - Extract omnia-medkit-openwrt-mvebu-turris-omnia-initramfs.tar.gz and copy dtb + zImage to your TFTP server (rename if desired) - Connect Turris Omnia WAN port to DHCP-enabled network with TFTP server - Connect serial console and interrupt U-Boot => dhcp => setenv serverip <tftp_server_ip_here> => tftpboot 0x01000000 zImage => tftpboot 0x02000000 dtb => bootz 0x01000000 - 0x02000000 - OpenWrt will now boot from ramdisk - Download openwrt-mvebu-turris-omnia-sysupgrade.img.gz to /tmp/ $ sysupgrade /tmp/openwrt-mvebu-turris-omnia-sysupgrade.img.gz - Wait another minute for the final OpenWrt image to be flashed. The Turris Omnia will reboot itself. Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
* firmware: ath10k-firmware: update QCA9984 firmware to 10.4-3.5.3-00053Henryk Heisig2018-03-091-1/+1
| | | | | | | | | | | | | | | | | | | This patch updates ath10k-firmware to use the firmware-5.bin_10.4-3.5.3-00053 firmware for the QCA9984. The update fixes "ath10k_pci 0001:01:00.0: Invalid VHT mcs 15 peer stats" spamming the kernel ring buffer at very high frequencies, but introduces the new "ath10k_pci 0001:01:00.0: Unknown eventid: 36925". This new warning doesn't appear to cause problems in practice and is only emitted relatively rarely, not causing dmesg to overflow within minutes. Tested on the ZyXEL NBG6817; early feedback also suggests this firmware to work well (with the same fixes and caveats) on the Netgear r7800 as well. Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* firmware: ath10k-firmware: update to 2018-02-09Henryk Heisig2018-03-091-4/+4
| | | | | | | This patch updates ath10k-firmware to last commit and use the firmware-5.bin_10.4-3.5.3-00053 firmware for the QCA9888. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* util-linux: added unshare and nsenter executablesToni Uhlig2018-03-091-0/+30
| | | | Signed-off-by: Toni Uhlig <matzeton@googlemail.com>
* iperf3: update to 3.5Philip Prindeville2018-03-092-67/+2
| | | | | | Get rid of patches which are already upstream. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>