aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* kirkwood: sync image filename with boardnameMathias Kresin2018-01-091-3/+11
| | | | | | | | | | Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kirkwood: use the generic board detectMathias Kresin2018-01-091-7/+7
| | | | | | | Drop the target specific detection function in favour of the generic one provided by base-files. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-kirkwood: fix default u-boot selectionMathias Kresin2018-01-091-0/+2
| | | | | | | | | Build the Seagate GoFlexHome u-boot for the Seagate GoFlexNet as well. The name clearly indicates that the u-boot can be used for both boards Build the Zyxel NSA310 u-boot if the NSA310B image is selected. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kirkwood: drop support for orphaned boardsMathias Kresin2018-01-093-31/+2
| | | | | | | No image build code for the Guruplug, Sheevaplug and NSA310S exists. Drop support for the boards for now. Signed-off-by: Mathias Kresin <dev@kresin.me>
* base-files: gpio switch: set output value with directionMathias Kresin2018-01-092-4/+3
| | | | | | | | | | | | Use the "low" and "high" values to configure the GPIO as an output with that initial value. It ensures that the gpio doesn't have a unwanted value during the time the direction is set to ouput and the actual value is applied. We don't need to take care of the GPIO polarity for now, since our exported GPIOs are always active low. Signed-off-by: Mathias Kresin <dev@kresin.me>
* base-files: gpio_switch: start before boot state done is setMathias Kresin2018-01-091-1/+1
| | | | | | | Start gpio_switch before the boot state is set to up/initialised/done. This way the exported GPIOs are available at the time rc.local is started. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: activate noise margin delta for VDSL tooHauke Mehrtens2018-01-071-2/+2
| | | | | | | | | | | Previously this was only activated for ADSL, this patch activates the same setting also for VDSL, this feature is also support for VDSL in the same way it works for ADSL. I tested it with DSL FW 5.7.9.5.1.7 against a Broadcom 177.140 DSLCO (Deutsche Telekom) and saw different data rates and Max. Attainable Data Rates depending on the ds_snr_offset settings I choose. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-envtool: remove superfluous + sign from PKG_BUILD_DEPENDSMatthias Schiffer2018-01-071-1/+1
| | | | | | A + sign does not have meaning in build depends. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* libubox: fix package bumpJo-Philipp Wich2018-01-071-4/+4
| | | | | | | | The previous commit was incorrectly rebased and referred to a not yet existing PROJECT_GIT variable. Fixes: d86a269c1f libubox: update to latest git HEAD Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* libubox: update to latest git HEADJo-Philipp Wich2018-01-071-1/+1
| | | | | | 1c08e80 jshn: properly support JSON "null" type Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "fstools: update to latest git HEAD"Jo-Philipp Wich2018-01-071-2/+2
| | | | | | | | This reverts commit df326e9b2e71a2c639371ef8acec0ac98bc36122. The referenced commit does not exist in the upstream repository. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* fstools: update to latest git HEADJohn Crispin2018-01-071-2/+2
| | | | | | | 2a9a6ea libfstools: optimize building directory string for glob de6b026 libfstools: support file paths longer than 255 chars Signed-off-by: John Crispin <john@phrozen.org>
* hostapd: bump PKG_RELEASE after 802.11w changesJo-Philipp Wich2018-01-071-1/+1
| | | | | Fixes: 8a57531855 "hostapd: set group_mgmt_cipher when ieee80211w is enabled" Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: fix packaging of kmod-gpio-nxp-74hc164Jo-Philipp Wich2018-01-071-3/+3
| | | | | | | | | | | | | | | | The NXP 74HC164 GPIO expander driver uses a different config symbol ("CONFIG_GPIO_74X164") and module name since since at least Kernel version 2.6.37. Update the kmod package definition accordingly by adjusting kconfig and module file names. This unrelated, but correct change has been separated from the WNR2000v5 support commits. Ref: https://github.com/lede-project/source/pull/1256 Suggested-by: Raphael Catolino <raphael.catolino@gmail.com> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* zlib: only enable NEON optimizations on eligible targetsJo-Philipp Wich2018-01-071-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | Instead of inferring the availability of NEON support from the target optimization flags, use a preprocessor test to decide whether to enable ARMv8 NEON optimizations. Fixes the following build error spotted by the mediatek/32 buildbot: [ 26%] Building C object CMakeFiles/zlib.dir/contrib/arm/inflate.o In file included from .../zlib-1.2.11/contrib/arm/chunkcopy.h:10:0, from .../zlib-1.2.11/contrib/arm/inflate.c:87: .../arm_neon.h:31:2: error: #error You must enable NEON instructions (e.g. -mfloat-abi=softfp -mfpu=neon) to use arm_neon.h #error You must enable NEON instructions (e.g. -mfloat-abi=softfp -mfpu=neon) to use arm_neon.h ^ In file included from .../zlib-1.2.11/contrib/arm/inflate.c:87:0: .../zlib-1.2.11/contrib/arm/chunkcopy.h:18:9: error: unknown type name 'uint8x16_t' typedef uint8x16_t chunkcopy_chunk_t; ^ [...] CMakeFiles/zlib.dir/build.make:302: recipe for target 'CMakeFiles/zlib.dir/contrib/arm/inflate.o' failed Fixes: 3acecba520 "package/libs/zlib: Add ARM and NEON optimizations" Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* hostapd: set group_mgmt_cipher when ieee80211w is enabledJo-Philipp Wich2018-01-071-1/+3
| | | | | | | | | | | | In order to properly support 802.11w, hostapd needs to advertise a group management cipher when negotiating associations. Introduce a new per-wifi-iface option "ieee80211w_mgmt_cipher" which defaults to the standard AES-128-CMAC cipher and always emit a "group_mgmt_cipher" setting in native hostapd config when 802.11w is enabled. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* argp-standalone: clean up patch fuzzKevin Darbyshire-Bryant2018-01-051-8/+8
| | | | | | Refresh patches to tidy up fuzz. No functional changes Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* lua: clean up patch fuzzKevin Darbyshire-Bryant2018-01-055-43/+44
| | | | | | Refresh patches to tidy up fuzz. No functional changes Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* busybox: clean up patch fuzzKevin Darbyshire-Bryant2018-01-052-8/+3
| | | | | | Refresh patches to tidy up fuzz. No functional changes Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* opkg: switch source url to git.openwrt.orgJo-Philipp Wich2018-01-041-2/+2
| | | | | | | As LEDE is rebranding to OpenWrt now, adjust the Git source references accordingly. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* netifd: update to latest git HEADHans Dedecker2018-01-041-3/+3
| | | | | | fd5c399 proto: allow dumping protocol handlers without config_params Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uci: add missing 'option' support to uci_rename()Tony Ambardar2018-01-021-2/+3
| | | | | | | When using the uci.sh wrapper, allow parameters to match those supported by the uci binary i.e. "uci rename <config>.<section>[.<option>]=<name>". Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* package/libs/zlib: Add host buildDaniel Engberg2018-01-021-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Some packages such as Python/Python3 (host pip/pip3) needs this to compile. More detailed explanation provided by Alexandru: "i need the zlib/host for Python/Python3 ; because, it seems the host pip/pip3 needs this to work ; i suspect in older versions this worked, because some of the host's build env would be used in the build, and then the zlib-dev from the host distro would be used ; now, the host-build does not seem to have any -I/usr/include stuff, which is good and it also seems that Python/Python3 does not like it if the zlib-dev package is too old, so using this zlib/host would be good for this as well" Source: https://github.com/lede-project/source/pull/1329#issuecomment-351055861 Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com> Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* package/libs/zlib: Add option for O3 optimizationDaniel Engberg2018-01-022-0/+21
| | | | | | | | | | Add option to use O3 optimization as not all devices have space constraints. This option is default using GCC in upstream but isn't in the CMake makefile for some reason. Source: https://github.com/madler/zlib/blob/master/configure#L170 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* package/libs/zlib: Add ARM and NEON optimizationsDaniel Engberg2018-01-024-1/+2770
| | | | | | | | | | | | | | | | | | | This adds two optimizations for ARM: NEON optimized Adler(-)32 checksum algorithm (ARMv7 and newer NEON CPUs) ARM(v7+) specific optimization for inflate I've also connected inflate optimization to the build using the following source as template. https://github.com/mirror/chromium/commit/0397489124ce7e6aced020f8b85f5034c7d5f49b#diff-a62ad2db6c83dbc205d34bb9a8884f16 Additional info: https://codereview.chromium.org/2676493007/ https://codereview.chromium.org/2722063002/ Sources: https://github.com/madler/zlib/pull/251 (only the first commit) https://github.com/madler/zlib/pull/256 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* package/libs/zlib: Use toolchain build logicDaniel Engberg2018-01-021-22/+4
| | | | | | Use build logic provided by toolchain instead of doing it manually. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* procd: procd_send_signal use signal namesKevin Darbyshire-Bryant2018-01-022-1/+5
| | | | | | | | | | | Usage documentation for 'procd_send_signal' states "The signal is SIGHUP by default, and must be specified by NAME." Make actual behaviour match the stated documented behaviour. https://wiki.openwrt.org/inbox/procd-init-scripts Suggested-by: Jo-Philip Wich <jow@mein.io> Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* procd: update to latest git HEADJohn Crispin2018-01-021-3/+3
| | | | | | | | a5954cf procd: Add %m to several functions that return errno. 810d7a5 procd: Remove redundant errno variable in several printf functions. fa5ce1c procd: Replace strerror(errno) with %m. Signed-off-by: John Crispin <john@phrozen.org>
* umdns: update to latest git HEADJohn Crispin2018-01-021-3/+3
| | | | | | 7897441 umdnsd: Replace strerror(errno) with %m. Signed-off-by: John Crispin <john@phrozen.org>
* kernel: make uas work during early bootDaniel Albers2018-01-021-1/+1
| | | | | | | | | | | | Add the uas(p) module to the modules loaded early on the boot process. The uas(p) is an modern alternative, which is used by the modern USB3 storage cases, compared to the bot protocol. To be able to use uas(p) storage cases for extroot, the kernel module has to be loaded before the search for extroot has been called. This patch changes the load order to support uas(p) storage cases for extroot. Signed-off-by: Daniel Albers <daniel.albers@public-files.de>
* fstools: update to latest git HEADJohn Crispin2018-01-021-3/+3
| | | | | | | | | 11efbf3 overlay: fix race condition when switching to jffs2 bdeb95a libblkid-tiny: add support for NTFS superblock ef2cc03 fstools: Replace strerror(errno) with %m format. 98fd5b4 libblkid-tiny: add support for UBI superblock Signed-off-by: John Crispin <john@phrozen.org>
* base-files: protect stop and reload actions with procd_lockRoman Yeryomin2018-01-021-0/+2
| | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> Signed-off-by: Andrejs Hanins <ahanins@gmail.com>
* procd: introduce procd_lock for init script protectionRoman Yeryomin2018-01-021-0/+15
| | | | | | | | | Use flock to protect init script from concurrent execution (of the same script). Important for services which generate native config files. Signed-off-by: Roman Yeryomin <roman@advem.lv> Signed-off-by: Andrejs Hanins <ahanins@gmail.com>
* busybox: enable flock by defaultRoman Yeryomin2018-01-021-1/+1
| | | | | | | This is needed for procd init script protection to work. flock adds 4248 bytes to stripped busybox binary. Signed-off-by: Roman Yeryomin <roman@advem.lv>
* busybox: backport cve-2017-16544 fixJohn Crispin2018-01-021-0/+40
| | | | | | | | | | | | | | | | | In the add_match function in libbb/lineedit.c in BusyBox through 1.27.2, the tab autocomplete feature of the shell, used to get a list of filenames in a directory, does not sanitize filenames and results in executing any escape sequence in the terminal. This could potentially result in code execution, arbitrary file writes, or other attacks. Fixes: FS#1181 - CVE-2017-16544: Backport the patch from: https://git.busybox.net/busybox/commit/?id=c3797d40a1c57352192c6106cc0f435e7d9c11e8 https://nvd.nist.gov/vuln/detail/CVE-2017-16544 Signed-off-by: Derek Werthmuller <thewerthfam@gmail.com> Signed-off-by: John Crispin <john@phrozen.org>
* base-files: rc.common: fix enable() return code and logicRoman Yeryomin2018-01-021-7/+8
| | | | | | | | | | | | | | | In current state, if there is START but no STOP, enbale() will return 1 (failure), which is wrong. Moreover there is no need to check for START/STOP twice. Instead, add err variable to save success state and and return it's value. Also eliminate the need to disable() by using 'ln -sf', which will first delete the old symlink if one exists. Changes from v1: - fixed description Signed-off-by: Roman Yeryomin <roman@advem.lv>
* procd: update to latest git HEADJohn Crispin2018-01-021-2/+2
| | | | | | | 7aad940 procd: initd: fix path allocation in early_insmod 006c19c procd: Remove unnecessary memset calls. Signed-off-by: John Crispin <john@phrozen.org>
* uci: bump to git HEAD versionJo-Philipp Wich2018-01-011-3/+3
| | | | | | | 5beb95d lua: additionally return name when looking up sections ff33bb2 lua: support extended section notation Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* nftables: fix sha256sumHauke Mehrtens2017-12-311-1/+1
| | | | | | The mirror was delivering a file with a different hash. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mwlwifi: update to version 10.3.4.0 / 2017-12-14Kabuli Chana2017-12-311-3/+3
| | | | | | Lastest stamped version Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
* kmod-sched-cake: bump to latest bakeKevin Darbyshire-Bryant2017-12-301-3/+3
| | | | | | | | | Fix overhead accounting error introduced by f33c4d6 refactor cake_advance_shaper and ack_filter Symptoms were links running under rate. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* iptables: fix nftables compile issue (FS#711)rektide de la faye2017-12-291-0/+20
| | | | | | | | | | | | | | | | Enabling IPTABLES_NFTABLES resulted in an error during build:# *** No rule to make target '../extensions/libext.a', needed by 'xtables-compat-multi'." Comments from Alexander Lochmann and Fedor Konstantinov in FS#711 provided fixes for this build error, allowing iptables to compile. https://bugs.lede-project.org/index.php?do=details&task_id=711. This commit updates the Makefile.am xtables_compat_multi_LDFLAGS and _LDADD, moving linking of extensions to LDFLAGS. Signed-off-by: rektide de la faye <rektide@voodoowarez.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* base-files: fix logic when to show failsafe bannerMatthias Schiffer2017-12-292-2/+2
| | | | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Fixes: 8170f280c4 ("base-files: set FAILSAFE in /etc/profile when /tmp/.failsafe exists")
* base-files: set FAILSAFE in /etc/profile when /tmp/.failsafe existsMatthias Schiffer2017-12-292-2/+5
| | | | | | | Since dropbear clears the environment, FAILSAFE was not set as intended in failsafe mode. This also broke sysupgrade from failsafe mode over SSH. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* busybox: add missing TARGET_CPPFLAGS and TARGET_LDFLAGSMatthias Schiffer2017-12-281-2/+3
| | | | | | | | | | | | | Unconditionally pass TARGET_CPPFLAGS (not passed at all before) and TARGET_LDFLAGS (passed only in certain non-default configuration before the Makefile streamlining). Without these flags, hardening options (PKG_FORTIFY_SOURCE and PKG_RELRO) were not actually applied to busybox. The addition of these flags increases the size of the stripped busybox binary by about 6KB (~4KB with fortify headers, ~2KB with "-znow -zrelro") with the default hardening options PKG_FORTIFY_SOURCE_1 and PKG_RELRO_FULL. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* busybox: streamline MakefileMatthias Schiffer2017-12-281-50/+17
| | | | | | | Use default Build/Install steps where possible. No binary change in default configuration, so PKG_RELEASE is not incremented. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* dnsmasq: send procd signal on service reloadFlorian Eckert2017-12-262-2/+2
| | | | | | | Send a SIGHUP signal via procd to the dnsmasq service so the instance(s) re-read(s) the /tmp/hosts/dhcp config. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* dnsmasq: rewrite config on host name modificationFlorian Eckert2017-12-261-1/+1
| | | | | | | If the hostname in /etc/config/system is modified the dnsmasq should also get triggered to rewrite/reload the config. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* layerscape: add byte_swap.py script for ls-rcw packageYangbo Lu2017-12-263-27/+67
| | | | | | | This patch is to add a byte_swap.py script for rcw bin byte swapping instead of using tclsh. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: fix PKG_BUILD_DIR for packagesYangbo Lu2017-12-262-2/+2
| | | | | | | | | | PKG_BUILD_DIR was defined with quoting PKG_VERSION in layerscape package makefiles. Now PKG_VERSION has been removed from these makefiles. When PKG_BUILD_DIR quotes PKG_VERSION, '=' should be used instead ':=' to make sure PKG_VERSION has been defined in common makefile. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 14:31:42 +0000