aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* uqmi: bump package releaseKoen Vandeputte2018-02-131-1/+1
| | | | | | fixes: da8990e717e1 ("uqmi: use built-in command for data-link verification") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: Add eTactica EG-200 supportKarl Palsson2018-02-131-0/+1
| | | | | | | | | | | | | | EG-200 is a DIN rail mountable device with one ethernet port, wifi, an RS-485 port, and an internal USB attached uSD card reader. Two leds, "modbus" and "etactica" are managed by userspace applications in factory firmware. Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Karl Palsson <karlp@etactica.com>
* uqmi: use built-in command for data-link verificationKoen Vandeputte2018-02-131-1/+19
| | | | | | | | | | | uqmi contains a command for directly querying the modem if there is a valid data connection, so let's use it. This avoids the cases were all previous tests are succesful, but the actual data link is not up for some reasons, leading to states were we thought the link was up when it actually wasn't .. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* uqmi: use correct value for connection checkingKoen Vandeputte2018-02-131-4/+8
| | | | | | | | | | | | | | Originally, the implementation only checked if uqmi command execution succeeded properly without actually checking it's returned data. This lead to a pass, even when the returned data was indicating an error. Rework the verification to actually check the returned data, which can only be correct if the uqmi command itself also executed correctly. On command execution success, value "pdh_" is a pure numeric value. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* uqmi: use general method for state cleaningKoen Vandeputte2018-02-131-10/+4
| | | | | | | | | | Debugging shows that using the general method properly cleans on each run, while the method specifying the client-ID shows "No effect" even while in connected state. Fixes several connectivity issues seen on specific modems. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* packages: uboot-mxs: override instead of appending u-boot make flagsMichael Heimpold2018-02-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | This prevents passing down the HOSTCC stuff set in u-boot.mk which results in linking errors against openssl: tools/mxsimage.o: In function `sb_aes_reinit': mxsimage.c:(.text+0x202): undefined reference to `EVP_CIPHER_CTX_reset' tools/mxsimage.o: In function `mxsimage_generate': mxsimage.c:(.text+0x110d): undefined reference to `EVP_MD_CTX_new' mxsimage.c:(.text+0x114f): undefined reference to `EVP_MD_CTX_free' mxsimage.c:(.text+0x11c3): undefined reference to `EVP_MD_CTX_new' mxsimage.c:(.text+0x1323): undefined reference to `EVP_MD_CTX_free' mxsimage.c:(.text+0x134a): undefined reference to `EVP_CIPHER_CTX_reset' tools/mxsimage.o: In function `mxsimage_verify_print_header': mxsimage.c:(.text+0x23ce): undefined reference to `EVP_MD_CTX_new' mxsimage.c:(.text+0x242c): undefined reference to `EVP_MD_CTX_new' mxsimage.c:(.text+0x246b): undefined reference to `EVP_MD_CTX_free' mxsimage.c:(.text+0x24ef): undefined reference to `EVP_CIPHER_CTX_reset' mxsimage.c:(.text+0x2e52): undefined reference to `EVP_MD_CTX_free' collect2: error: ld returned 1 exit status Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* packages: uboot-mxs: bump to 2017.11Michael Heimpold2018-02-132-120/+292
| | | | | | Also update the U-Boot BSP patch for I2SE Duckbill devices. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* iptables: Support building connlabel moduleKristian Evensen2018-02-132-0/+30
| | | | | | | | | | It is currently possible to enable connlabel-support in iptables. However, in order for connlabel to work properly, the kernel module must also be present. This patch adds support for building the connlabel-module, and selects it by default when connlabel-support is enabled. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
* layerscape: support ubifs rootfs in u-boot envYangbo Lu2018-02-135-15/+15
| | | | | | | ls1012ardb/ls1012afrdm/ls1046ardb/ls1088ardb firmwares now use ubifs rootfs. So u-boot env should be set accordingly. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update u-boot to LSDK1712Yangbo Lu2018-02-134-32/+32
| | | | | | | This patch is to update layerscape u-boot to NXP LSDK1712 release. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ppfe firmware to LSDK1712Yangbo Lu2018-02-131-5/+5
| | | | | | | | Updated ppfe firmware to NXP LSDK1712 release. Used ppfe firmware git tree on NXP github since it was migrated here from qoriq-open-source github. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add ls-rcw-bin packageYangbo Lu2018-02-132-28/+103
| | | | | | | | | | | | NXP LSDK1712 release used two rcw git trees. The original rcw git tree was still source code but dropping ls1012a/ls1088a/ls2088a boards in LSDK1712. Instead another new rcw git tree was used to just provided rcw binaries for these boards dropped. So this patch is to update ls-rcw to LSDK1712 release and add a new ls-rcw-bin package. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update PPA firmware to LSDK1712Yangbo Lu2018-02-131-3/+3
| | | | | | | This patch is to update PPA firmware to NXP LSDK1712 release. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: migrate fman-ucode to NXP githubYangbo Lu2018-02-131-1/+1
| | | | | | | | fman-ucode had been migrated from qoriq-open-source github to NXP github. So the Makefile should be fixed accordingly. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update MC firmware to LSDK1712Yangbo Lu2018-02-131-6/+6
| | | | | | | | Updated MC firmware to NXP LSDK1712 release. Used MC firmware git tree on NXP github since it was migrated here from qoriq-open-source github. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update restool to 2017-12-03Yangbo Lu2018-02-1313-759/+3
| | | | | | | Updated restool to 2017-12-03 and removed patches since the new version had involved them. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* kmod-sched: add sch_multiq to extra schedulersPhilip Prindeville2018-02-131-0/+1
| | | | | | | For hardware that supports multiple h/w output queues, add a compatible scheduler (NET_SCH_MULTIQ). Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* base-files: don't evaluate block-device ueventDaniel Golle2018-02-131-4/+8
| | | | | | | | | | | | | Current code and also before commit da52dd0c83 was vulnerable to shell injection using volume lables in the GPT partition table of block devices. Given that partition names can be freely defined in GPT tables we really shouldn't evaluate a string which is potentially crafted with evil intentions. Hence rather use `export -n` to absorb the uevent's variables into the environment. Fixes commit da52dd0c83 (base-files: quote values when evaluating uevent) Signed-off-by: Daniel Golle <daniel@makrotopia.org> [mschiffer@universe-factory.net: suggested export -n usage]
* kernel: add IEEE-1284 parallel port supportDaniel Gimpelevich2018-02-121-5/+40
| | | | | | | | | | The kmod-lp package included both lp.ko and ppdev.ko, but ECP device drivers may or may not require lp NOT to be loaded, needing only ppdev. Additionally, There were no packages for any parport interface modules, such as uss720 or parport_pc, provided here. It has not been otherwise possible to use PC-style parport hardware for kmod-lp. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
* broadcom-wl: fix compilation with 4.14Jonas Gorski2018-02-111-0/+10
| | | | | | | | The last_rx field was removed from net_device. Since the field wasn't used by the generic subsystem, and the driver only writes to it, just remove the usage. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* wrt55agv2-spidevs: remove obsolete packageFelix Fietkau2018-02-114-155/+0
| | | | | | | It hasn't compiled in a long time and needs to be updated before it can be restored anyway. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files: quote values when evaluating ueventDaniel Golle2018-02-111-3/+2
| | | | | | | | When sourcing /sys/class/block/*/uevent values have to be quoted as they may contain spaces (e.g. in PARTNAME). Fix this by pre-processing with sed before sourcing. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq-wifi: drop OpenMesh A42 board-2.binSven Eckelmann2018-02-112-2/+1
| | | | | | | | | | | The BDFs for OpenMesh A42 were upstreamed [1] to the ath10k-firmware repository and are now part of ath10k-firmware 2018-01-26. The ipq-wifi-openmesh_a42 package can now be dropped because OpenWrt already ships the QCA4019 board-2.bin from this version. [1] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* firmware: ath10k-firmware: update to 2018-01-26Sven Eckelmann2018-02-111-3/+3
| | | | | | | | | * introduces the BDFs for the OpenMesh A42 in /lib/firmware/ath10k/QCA4019/hw1.0/board-2.bin. * adds new firmware firmware-6.bin_RM.4.4.1.c1-00037-QCARMSWP-1 for QCA6174 hw3.0 Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* kexec-tools: bump version to 2.0.16Philip Prindeville2018-02-115-245/+3
| | | | | | All patches have been integrated upstream. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* kexec-tools: issue warning when dd'ing vmcorePhilip Prindeville2018-02-112-1/+3
| | | | | | | | With no warning, it just looks like the box has hung during boot. We don't want users resetting it without having captured a crashdump. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* firmware: add microcode package for IntelZoltan HERPAI2018-02-111-0/+49
| | | | | | | | | | | | | | | | Compiling the Intel microcode package results in a microcode.bin and a microcode-64.bin. As we can decide based on the subtarget which should be used, we'll only split the required .bin file with iucode-tool. x64 will get the intel-microcode-64.bin All other variants will get intel-microcode.bin The microcodes will be updated from preinit via a common script - that's the earliest place where we can do it. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* firmware: add microcode package for AMDZoltan HERPAI2018-02-111-0/+45
| | | | | | | | | | | Use the Debian repository for sourcing the ucode files. Current (20171205) includes support for fam17h CPUs already. The microcodes will be updated from preinit via a common script - that's the earliest place where we can do it. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* tools: add iucode-toolZoltan HERPAI2018-02-111-0/+47
| | | | | | | | | | | | Add tool to "compile" Intel microcode files. The tool will be compiled for host (to split the microcode.dat) and for target (to forcibly reload the microcode if required). Instead of using the large microcode.bin/microcode-64.bin, the splitted ucode files (separate for CPU families) will be installed. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* fstools: update to latest git HEADJohn Crispin2018-02-111-3/+3
| | | | | | | | 3d23981 strip trailing spaces from vfat labels c4a3c97 fix vfat volume label 5010710 block: support /dev/nvme* nodes Signed-off-by: John Crispin <john@phrozen.org>
* uboot-fritz4040: Fix build with HOSTCFLAGSHauke Mehrtens2018-02-111-1/+1
| | | | | | | | | | | | When we provide the HOSTCFLAGS to the U-Boot build it will fail because it can not find the u-boot provided header files any more. Just overwrite and not append the package specific configuration on top of the configuration provided by u-boot.mk. uboot-fritz4040 is based on U-Boot 2012.07 and this problem is probably similar to the problem seen with the lantiq and ar71xx u-boot build. Fixes: df9781a4205 ("u-boot,at91bootstrap: fix incorrect HOSTCPPFLAGS variable") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-fouFilip Moc2018-02-101-0/+22
| | | | | | | | | Once installed fou kernel module allows you to use FOU (Foo over UDP) and GUE (Generic UDP encapsulation) tunnel protocols. To get ip fou command working you also need to install ip-full. Signed-off-by: Filip Moc <lede@moc6.cz>
* uboot-mvebu: fix build ; use the build's tools/libresslAlexandru Ardelean2018-02-103-251/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since I have no openssl-dev on my machine, I first get this error: ``` tools/kwbimage.c:21:10: fatal error: openssl/bn.h: No such file or directory #include <openssl/bn.h> ``` After removing the UBOOT_MAKE_FLAGS the next error is: ``` tools/kwbimage.c:40:6: error: conflicting types for ‘EVP_MD_CTX_cleanup’ void EVP_MD_CTX_cleanup(EVP_MD_CTX *ctx) ``` After removing the OpenSSL patches the next error is: ``` HOSTLD tools/dumpimage /usr/bin/ld: cannot find -lssl /usr/bin/ld: cannot find -lcrypto collect2: error: ld returned 1 exit status scripts/Makefile.host:108: recipe for target 'tools/dumpimage' failed make[5]: *** [tools/dumpimage] Error 1 ``` So, the final part is to add the build system's HOST_LDFLAGS to the UBOOT_MAKE_FLAGS. (which was done in the previous commit) Then the image builds. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* u-boot,at91bootstrap: fix incorrect HOSTCPPFLAGS variableAlexandru Ardelean2018-02-101-1/+1
| | | | | | | | | | | | | | | | | This would should up as `$$(HOSTCPPFLAGS)` in the host CFLAGS. ``` make --jobserver-fds=3,4 -j -C <openwrt>/build_dir/target-arm_cortex-a8+vfpv3_musl_eabi/u-boot-A10-OLinuXino-Lime/u-boot-2017.07 CROSS_COMPILE=arm-openwrt-linux-muslgnueabi- DTC="<openwrt>/build_dir/target-arm_cortex-a8+vfpv3_musl_eabi/linux-sunxi_cortexa8/linux-4.9.76/scripts/dtc/dtc" HOSTCC="gcc" HOSTCFLAGS='-O2 -I<openwrt>/staging_dir/host/include -I<openwrt>/staging_dir/host/usr/include -I<openwrt>/staging_dir/hostpkg/include -I<openwrt>/staging_dir/target-arm_cortex-a8+vfpv3_musl_eabi/host/include $$(HOSTCPPFLAGS)' HOSTLDFLAGS="" BL31=<openwrt>/staging_dir/target-arm_cortex-a8+vfpv3_musl_eabi/image/bl31.bin ``` And then it would complain with: ``` /bin/sh: 1: HOSTCPPFLAGS: not found ``` Also, HOSTCPPFLAGS does not exist. The correct var is HOST_CPPFLAGS. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* valgrind: Fix compile on ARM64Hauke Mehrtens2018-02-101-2/+7
| | | | | | | Activate the support for 64 bit on all 64 bit CPUs and not only x86_64. ARM64 does not provide an xml file, so do not pack any. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bunwind: build for ARM64Hauke Mehrtens2018-02-101-1/+1
| | | | | | | ARM64 is supported by libunwind since some versions, allow building it for aarch64. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: fix build by adding comparabilities for old dtcHauke Mehrtens2018-02-101-0/+52
| | | | | | | We use the dtc from the kernel and that does not have all the options which u-boot would like to use now. make these parameters optional. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: refresh patchesHauke Mehrtens2018-02-106-10/+10
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mt76: update to the latest version, fixes mt7603 stability issuesFelix Fietkau2018-02-091-3/+3
| | | | | | | | 3413961 mt7603: avoid reordering qos-null data packets c60e6db mt76: toggle driver station powersave bit before notifying mac80211 246d548 mt76: stop tx queues from the driver callback instead of common code Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove kmod-spi-gpio-oldFelix Fietkau2018-02-091-16/+0
| | | | | | It is unused and has been deprecated for a long time Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wrt55agv2-spidevs: mark as brokenFelix Fietkau2018-02-091-1/+1
| | | | | | | The target it was meant for was updated to a version that this does not compile with. It probably also hasn't been used in years Signed-off-by: Felix Fietkau <nbd@nbd.name>
* odhcp6c: fix appending of emtpy sendopt value (FS#1336)Hans Dedecker2018-02-082-2/+2
| | | | | | | | Don't append an empty sendopts value as odhcp6c bails out immediately on an empty -x option triggering an infinite start loop of odhcp6c Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* libubox: bump to git HEAD versionHans Dedecker2018-02-081-3/+3
| | | | | | b0c830 sh/jshn.sh: add json_for_each_item() Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcp6c: change sendopts option into listHans Dedecker2018-02-082-7/+9
| | | | | | | | Commit a26045049b added support for sendopts as a string; since multiple sendopts values can be specified it makes more sense to model it as a list of strings. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* netifd: update to latest git HEADHans Dedecker2018-02-071-3/+3
| | | | | | 1be329c netifd-proto: add proto_config_add_array wrapper Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uboot-sunxi: bump to 2017.11Zoltan HERPAI2018-02-0611-392/+36
| | | | | | | | | | | | | | | Runtime-tested on: - Pine64 (A64) - Orange Pi 2 (H3) - Bananapro (A20) - Olimex A20-Micro (A20) - Pcduino v3 (A20) - Pcduino v2 (A10) Compile-tested on: - all A8/A7/A53 boards Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ltq-atm: cleanup unused variables and functionsMartin Schiller2018-02-051-41/+0
| | | | Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ltq-atm: rewrite tx path to use IRQsAlexander Couzens2018-02-052-46/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ATM subsystem is different from the generic ethernet NICs. The ATM subsystem requires a callback when a packet has been sent. It means a tx skb_buff need to be used after it has sent. While the generic NIC can fill up the TX ring and free skb_buffs if it encounter a ring buffer slot with an already sent skbuff. The ATM drivers need call the pop() function after it has send a single ATM package. The ATM subsystem controls via this ways the queuing. The ppe engine use DMA channels for read and write. Every atm_vcc has it's own TX DMA channel and each TX DMA channel has it's own ring buffer. The old driver had multiple issues: - Call the subsystem callback at the beginning of tx function (ppe_send). Didn't allowed the ATM subsystem to control the enqueued package amount. - Filled up the TX ring until full and fail futher - copy or decouple the skb from all other subsystem before giving it over to TX ring The new tx path uses interupts. - call the subsystem callback _after_ it was sent by hardware - no need to copy our decouple the skb any more - gives back control to the atm subsystem over the enqueued packages - use an interupt for every sent atm package Using interupts shouldn't be a problem because of the slow uplink bandwidth of ADSL. The speed _through_ the DSL router was always as high as it should be, only traffic generated on the router itself were affected. After changing to new tx path, the speed of iperf's run on the router itself reached the same speed. The master/trunk wasn't as much affected because of TCP optimisations (reboot-5022-gb2ea46fe236a). The following results are taken on the remote server, which receives the stream over the internet and the DSL line. The sync moves between every sync a litte bit, but is so far stable Latency / Interleave Delay: Down: Fast (0.25 ms) / Up: Fast (0.50 ms) Data Rate: Down: 13.287 Mb/s / Up: 1.151 Mb/s reboot-5521-g9f8d28285d without patch [ ID] Interval Transfer Bandwidth Retr [ 5] 0.00-10.04 sec 947 KBytes 773 Kbits/sec 0 sender [ 5] 0.00-10.04 sec 928 KBytes 757 Kbits/sec receiver reboot-5521-g9f8d28285d with patch [ 5] 0.00-10.06 sec 1.16 MBytes 970 Kbits/sec 0 sender [ 5] 0.00-10.06 sec 1.15 MBytes 959 Kbits/sec receiver v17.01.4-239-g55c23e44f4 without patch [ ID] Interval Transfer Bandwidth Retr [ 5] 0.00-10.04 sec 87.4 KBytes 71.3 Kbits/sec 0 sender [ 5] 0.00-10.04 sec 59.6 KBytes 48.7 Kbits/sec receiver v17.01.4-239-g55c23e44f4 with patch [ ID] Interval Transfer Bandwidth Retr [ 5] 0.00-10.05 sec 1.18 MBytes 983 Kbits/sec 1 sender [ 5] 0.00-10.05 sec 1.15 MBytes 959 Kbits/sec receiver Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* arm-trusted-firmware-sunxi: use release build and bump versionZoltan HERPAI2018-02-051-5/+4
| | | | | | | | | - use release build instead of debug to reduce size - bump to use latest commit in allwinner tree Tested on Pine64/1G. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* mt76: update to the latest versionFelix Fietkau2018-02-051-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 2b7fae4 mt76: fix returnvar.cocci warnings 939e3e0 mt76x2: dfs: avoid tasklet scheduling during mt76x2_dfs_init_params() cf59170 mt76x2: dfs: add set_domain handler 5e4d60e mt76x2: dfs: take into account dfs region in mt76x2_dfs_init_params() f76e25f mt76x2: fix WMM parameter configuration 34d612d mt76: retry rx polling as long as there is budget left 0f8327a mt76x2: fix TSF value in probe responses ad3f8e9 mt76: add an intermediate struct for rx status information 58a41f1 mt76: get station pointer by wcid and pass it to mac80211 b0508d3 mt76: implement A-MPDU rx reordering in the driver code cf3cfc4 mt76: split mt76_rx_complete 461cdf9 mt76: pass the per-vif wcid to the core for multicast rx 9b2c778 mt76: validate rx CCMP PN 302af90 mt76x2: init: disable all pending tasklets during device removal 9f685fe mt7603: init: disable tbtt tasklet during device removal c6f8cac mt76: let mac80211 validate CCMP PN for fragmented frames 3968dae mt7603: fix 40 mhz channel bandwidth reporting 9c2e03d mt7603: fix rx LDPC reporting f515dfc mt76: implement AP_LINK_PS 974142c mt76: implement processing of BlockAckReq frames c5209db mt76: avoid re-queueing A-MPDU rx reorder work if no frames are pending e67e7a5 mt76x2: do not set status->aggr for NULL data frames 8693864 mt76: check qos ack policy before reordering packets Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 22:18:44 +0000