aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* uboot-envtools: add support for ESPRESSObin and MACCHIATObinDamir Samardzic2018-04-251-0/+4
| | | | | | | | Added for convenience. These boards can be used as dev boards running various operating systems from different media, and this simplifies work with U-Boot environment. Signed-off-by: Damir Samardzic <damir.samardzic@sartura.hr>
* ipq40xx: add support for OpenMesh A62Sven Eckelmann2018-04-231-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * QCA IPQ4019 * 256 MB of RAM * 32 MB of SPI NOR flash (s25fl256s1) - 2x 15 MB available; but one of the 15 MB regions is the recovery image * 2T2R 2.4 GHz - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62 * 2T2R 5 GHz (channel 36-64) - QCA9888 hw2.0 (PCI) - requires special BDF in QCA9888/hw2.0/board-2.bin bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 * 2T2R 5 GHz (channel 100-165) - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62 * multi-color LED (controlled via red/green/blue GPIOs) * 1x button (reset; kmod-input-gpio-keys compatible) * external watchdog - triggered GPIO * 1x USB (xHCI) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x gigabit ethernet - phy@mdio3: + Label: Ethernet 1 + gmac0 (ethaddr) in original firmware + 802.3at POE+ - phy@mdio4: + Label: Ethernet 2 + gmac1 (eth1addr) in original firmware + 18-24V passive POE (mode B) * powered only via POE The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the factory image to the u-boot when the device boots up. The initramfs image can be started using setenv bootargs 'loglevel=8 earlycon=msm_serial_dm,0x78af000 console=ttyMSM0,115200 mtdparts=spi0.0:256k(0:SBL1),128k(0:MIBIB),384k(0:QSEE),64k(0:CDT),64k(0:DDRPARAMS),64k(0:APPSBLENV),512k(0:APPSBL),64k(0:ART),64k(0:custom),64k(0:KEYS),15552k(inactive),15552k(inactive2)' tftpboot 0x84000000 openwrt-ipq40xx-openmesh_a62-initramfs-fit-uImage.itb set fdt_high 0x85000000 bootm 0x84000000 Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* ipq-wifi: drop custom board-2.binsSven Eckelmann2018-04-237-7/+3
| | | | | | | | | | | | | The BDFs for all boards were upstreamed to the ath10k-firmware repository and are now part of ath10k-firmware 2018-04-19. We switched to the upstream board-2.bin, hence the files can be removed here. Keep the ipq-wifi package in case new boards are added. It might take some time till board-2.bins send upstream are merged. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* firmware: ath10k-firmware: update to 2018-04-19Sven Eckelmann2018-04-231-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * introduces the BDFs in /lib/firmware/ath10k/QCA4019/hw1.0/board-2.bin for: - 8devices Jalapeno - Asus RT-AC58U - AVM FRITZ!Box 4040 - GL.iNet GL-B1300 - Meraki MR33 - Netgear EX6100v2 - Netgear EX6150v2 - OpenMesh A62 * introduces the BDFs in /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin - OpenMesh A62 * adds new firmware for QCA6174 hw3.0 - firmware-6.bin_RM.4.4.1.c1-00038-QCARMSWP-1 - firmware-6.bin_RM.4.4.1.c1-00041-QCARMSWP-1 * various undocumented BDF updates to: - QCA4019 hw1.0: + bus=ahb,bmi-chip-id=0,bmi-board-id=16 + bus=ahb,bmi-chip-id=0,bmi-board-id=17 + bus=ahb,bmi-chip-id=0,bmi-board-id=19 + bus=ahb,bmi-chip-id=0,bmi-board-id=20 + bus=ahb,bmi-chip-id=0,bmi-board-id=21 + bus=ahb,bmi-chip-id=0,bmi-board-id=29 + bus=ahb,bmi-chip-id=0,bmi-board-id=30 - QCA9888 hw2.0: + bus=pci,bmi-chip-id=0,bmi-board-id=16 + bus=pci,bmi-chip-id=0,bmi-board-id=17 + bus=pci,bmi-chip-id=0,bmi-board-id=18 + bus=pci,bmi-chip-id=0,bmi-board-id=23 + bus=pci,bmi-chip-id=0,bmi-board-id=24 + bus=pci,bmi-chip-id=0,bmi-board-id=25 - QCA9984 hw1.0: + bus=pci,bmi-chip-id=0,bmi-board-id=1 + bus=pci,bmi-chip-id=0,bmi-board-id=3 + bus=pci,bmi-chip-id=0,bmi-board-id=5 + bus=pci,bmi-chip-id=0,bmi-board-id=6 + bus=pci,bmi-chip-id=0,bmi-board-id=7 + bus=pci,bmi-chip-id=0,bmi-board-id=8 Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* odhcpd: update to latest git HEADHans Dedecker2018-04-231-4/+4
| | | | | | | 4136529 dhcpv6-ia: keep tentative assignments alive for a short time 200cc8f dhcpv6-ia: make assignment lookup more strict Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mac80211: update patch to read ath10k variant from DTThomas Hebb2018-04-203-13/+18
| | | | | | | | | This patch was revised upstream before being merged, and OpenWrt's copy was never updated to reflect the revision. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> [refreshed patches] Signed-off-by: Mathias Kresin <dev@kresin.me>
* wireguard: bump to 20180420Kevin Darbyshire-Bryant2018-04-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | 7cc2668 version: bump snapshot 860c7c7 poly1305: do not place constants in different sections 5f1e4ca compat: remove unused dev_recursion_level backport 7e4b991 blake2s: remove unused helper 13225fc send: simplify skb_padding with nice macro a1525bf send: account for route-based MTU bbb2fde wg-quick: account for specified fwmark in auto routing mode c452105 qemu: bump default version dbe5223 version: bump snapshot 1d3ef31 chacha20poly1305: put magic constant behind macro cdc164c chacha20poly1305: add self tests from wycheproof 1060e54 curve25519: add self tests from wycheproof 0e1e127 wg-quick.8: fix typo 2b06b8e curve25519: precomp const correctness 8102664 curve25519: memzero in batches 1f54c43 curve25519: use cmov instead of xor for cswap fa5326f curve25519: use precomp implementation instead of sandy2x 9b19328 compat: support OpenSUSE 15 3102d28 compat: silence warning on frankenkernels 8f64c61 compat: stable kernels are now receiving b87b619 62127f9 wg-quick: hide errors on save Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* hostapd: fix encrypted mesh channel settingsDaniel Golle2018-04-205-1/+226
| | | | | | | | | | | | | | | Import two patches from Peter Oh to allow setting channel bandwidth in the way it already works for managed interfaces. This fixes mesh interfaces on 802.11ac devices always coming up in VHT80 mode. Add a patch to allow HT40 also on 2.4GHz if noscan option is set, which also skips secondary channel scan just like noscan works in AP mode. This time also make sure to add all files to the patch before committing it... Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* rpcd: update to latest HEADJo-Philipp Wich2018-04-201-3/+3
| | | | | | | | | | | | 6994c87 uci: fix session delta isolation f0f6f81 session: remove redundant key attribute to rpc_session_set() 3d400c7 session: support reclaiming pending apply session eb09f3a session: ignore non-string username attribute upon restore edd37f8 uci: add rpc_uci_replace_savedir() helper 2423162 uci: switch to proper save directory on apply/rollback 66a9bad uci: fix memory leak in rpc_uci_apply_timeout() Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "hostapd: fix encrypted mesh channel settings"Felix Fietkau2018-04-205-213/+1
| | | | | | | This reverts commit 7f52919a2f2894125b4dca611eb2d30181af7e0b, which is currently breaking the builds and needs to be reworked Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mtd: fix erase handling with partition offset on writeFelix Fietkau2018-04-201-1/+1
| | | | | | | | When a partition offset is given, it is used in an lseek call, which affects write, but not erase. Add it to the offset for erase calls as well Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-envtools: remove makefile duplication for supported targetsFelix Fietkau2018-04-201-47/+4
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix encrypted mesh channel settingsDaniel Golle2018-04-205-1/+213
| | | | | | | | | | | | Import two patches from Peter Oh to allow setting channel bandwidth in the way it already works for managed interfaces. This fixes mesh interfaces on 802.11ac devices always coming up in VHT80 mode. Add a patch to allow HT40 also on 2.4GHz if noscan option is set, which also skips secondary channel scan just like noscan works in AP mode. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: pass down noscan to wpa_supplicantDaniel Golle2018-04-202-2/+2
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* netifd: update to latest git HEADDaniel Golle2018-04-201-3/+3
| | | | | | b3dca7b wireless: include noscan option in common wdev vars Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* odhcpd: update to latest git HEAD (FS#1457)Hans Dedecker2018-04-191-4/+4
| | | | | | dcfc06a router: fix managed address configuration setting Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mac80211: join 5GHz checksLeon M. George2018-04-191-6/+3
| | | | | | | | | | Before this commit, devices supporting both 2.4GHz and 5GHz would be configured for 2.4GHz by default - unless they have VHT capabilities. With this commit, channel 36 is only set when the frequency is supported. VHT isn't checked unless that is the case. Signed-off-by: Leon M. George <leon@georgemail.eu>
* network/uqmi: pipe the output off qmi_wds_stop to /dev/nullFlorian Eckert2018-04-191-3/+8
| | | | | | | | | | Pipe uqmi output from qmi_wds_stop function into /dev/null. This will supress the following output in proto teardown. netifd: wwan (x): "No effect" netifd: wwan (x): Command failed: Permission denied Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* package/utils/lua: cleanup source mirrorsPaul Wassi2018-04-181-2/+0
| | | | | | Remove inactive mirrors from the sources list. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* uboot-envtools: update to 2018.03Luis Araneda2018-04-186-234/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several changes has been made: + AES support has been removed by upstream commit c6831c7 (2017-11-14) [remove patch "200-fw_env_no_aes.patch"] + Support for UBI volumes has beed added by upstream commit 34255b9 (2017-11-15) [remove patch "300-support-env-in-ubivol-chardev.patch"] + A command line argument has beed added ("-c") to manually indicate the location of the environment configuration file Also, patch "400-u-boot-2015.10-stdint.patch" is no longer necessary, and the config option to enable UBI support has been removed. Size comparisons: fw_printenv size: Target Before After ar71xx 15,189 bytes 18,133 bytes (+2,944 bytes) ipq40xx 20,873 bytes 20,987 bytes (+114 bytes) mvebu 20,881 bytes 20,991 bytes (+110 bytes) ramips 15,128 bytes 18,072 bytes (+2,944 bytes) OPKG package size: Target Before After ar71xx 11,309 bytes 12,875 bytes (+1,566 bytes) ipq40xx 11,772 bytes 13,299 bytes (+1,527 bytes) mvebu 11,609 bytes 13,114 bytes (+1,505 bytes) ramips 10,975 bytes 12,503 bytes (+1,528 bytes) Compile tested: ipq40xx (musl, glibc, gcc5-musl), ar71xx, mvebu, ramips Run tested: ipq40xx (ASUS RT-AC58U) Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* ustream-ssl: px5g: Rebuild packageHauke Mehrtens2018-04-182-2/+2
| | | | | | | | | | | | mbedtls changed in version 2.7.0 the soversion of the libmbedcrypto.so library, all applications using this shared library have to be recompiled to be able to load the new library. Some binaries got rebuild to for the 2.7.0 release and are now using libmbedcrypto.so.1, the older ones are still using libmbedcrypto.so.0. Fixes: 75c5ab4ca ("mbedtls: update to version 2.7.0") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mwlwifi: update to version 10.3.4.0-2018-03-30Kabuli Chana2018-04-181-3/+3
| | | | | | Upgrade 88W8964 firmware to 9.3.2.6 Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
* mac80211: ipw2200-fw: fix download mirror(s)Stefan Lippers-Hollmann2018-04-181-1/+5
| | | | | | | bughost.org hasn't existed for 6-8 years, add a couple of current mirrors to avoid the fallback to http://mirror2.openwrt.org/sources/. Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* mac80211: ipw2100-fw: fix download mirror(s)Stefan Lippers-Hollmann2018-04-181-1/+5
| | | | | | | bughost.org hasn't existed for 6-8 years, add a couple of current mirrors to avoid the fallback to http://mirror2.openwrt.org/sources/. Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* ath10k-ct: make it depend on PCI support againHauke Mehrtens2018-04-181-1/+1
| | | | | | | | | | | | The missing dependency causes build problems on systems without PCI support. The ath10k_pci kernel module depends on PCI support so this dependency should be added. ath10k now also supported the ahb interface on the IPQ4019 SoC, but this SoC also has PCI support so this extra dependency is not as problem. Fixes: d0f3dd5b9f34176 ("ath10k-ct: update to latest version, enable AHB.") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: ath10k: Suppress "Unknown eventid: 36925" warningsStefan Lippers-Hollmann2018-04-181-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | Merge upstream patch from Sathishkumar Muruganandam <murugana@codeaurora.org> for OpenWrt's backports package: https://lkml.kernel.org/r/<1522049641-19521-1-git-send-email-murugana@codeaurora.org> Commit-ID: 606204bb863fa3b0bb54929d79b4dc46338f9180 * FW has Smart Logging feature enabled by default for detecting failures * and processing FATAL_CONDITION_EVENTID (36925 - 0x903D) back to host. * * Since ath10k doesn't implement the Smart Logging and FATAL CONDITION * EVENT processing yet, suppressing the unknown event ID warning by moving * this under ATH10K_DBG_WMI. * * Simulated the same issue by having associated STA powered off when * ping flood was running from AP backbone. This triggerd STA KICKOUT * in AP followed by FATAL CONDITION event 36925. * * Issue was reproduced and verified in below DUT * ------------------------------------------------ * AP mode of OpenWRT QCA9984 running 6.0.8 with FW ver 10.4-3.5.3-00053 * * Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* mac80211: Fix loading of rsi_sdio moduleHauke Mehrtens2018-04-181-0/+96
| | | | | | | | When CONFIG_PM was not set rsi_sdio_reinit_device() was not compiled into the driver but referenced. This is a backport form the mainline Linux kernel. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: add RedPine RS9113 module supportEvgeniy Didin2018-04-183-0/+131
| | | | | | | | | | | RedPine RS9113 wireless module requires rsi91x driver to be built and linux-firmware/rsi/rs9113_wlan_qspi.rps to be installed. Also we add patch for successful compilation of rsi91x driver. Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: John Crispin <john@phrozen.org>
* hostapd: mesh: make forwarding configurableDaniel Golle2018-04-183-2/+245
| | | | | | | | | | | For unencrypted mesh networks our scripts take care of setting the various mesh_param values. wpa_supplicant changes somes of them when being used for SAE encrypted mesh and previously didn't allow configuring any of them. Add support for setting mesh_fwding (which has to be set to 0 when using other routing protocols on top of 802.11s) and update our script to pass the value to wpa_supplicant. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Revert "mac80211: pass hostapd control socket to mesh-mode supplicant"Daniel Golle2018-04-181-1/+1
| | | | | | | | This reverts commit 1356a66f94f31e636fafec514a1c658356ef51b3. The change breaks wpa_supplicant.conf generation, more work is needed to fix mesh+AP. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mt76: update to the latest versionFelix Fietkau2018-04-181-3/+3
| | | | | | | | ec8435e mt76: initialize rx lock earlier e08d5da mt76x2: fix is_mt7612 routine e2eedc9 mt7603: retry PSE reset calls Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: disable accept_ra by defaultMatthias Schiffer2018-04-172-1/+9
| | | | | | | | | | | Our commands setting accept_ra to 0 on all interfaces got lost in the transition to procd. This remained unnoticed for a long time, as we also enable forwarding on all interfaces, which prevents RA handling by default. Restore the commands, while also fixing a possible race condition in the old version. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mt76: update to the latest versionFelix Fietkau2018-04-171-3/+3
| | | | | | | | | ea6dd6f mt7603: add missing spin lock init 2d08440 mt76: add rcu locking around tx scheduling 8c92c91 mt7603: turn vif wcid entry back into a full mt7603_sta ca5cc9a mt76: fix concurrent rx calls on A-MPDU release Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files: /lib/functions.sh: remove unused insert_modulesMatthias Schiffer2018-04-172-11/+1
| | | | | | insert_modules has been unused since r5279. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* curl: Deprecate idn(1) support and switch to xz tarballDaniel Engberg2018-04-162-8/+9
| | | | | | | libidn(1) is deprecated, add libidn2 support Switch to xz tarball (smaller size) Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* fstools: update to latest master branchRafał Miłecki2018-04-161-3/+3
| | | | | | | | e243683 libfstools: move mount points when switching to JFFS2 3782b59 libfstools: add "const" to char pointer arguments in mount_move() 79721f0 libfstools: fix foreachdir() to pass dir with a trailing slash Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* netifd: update to latest git HEAD (coverity fixes)Hans Dedecker2018-04-161-3/+3
| | | | | | | | | | | | 513eb27 system-linux: check ioctl return value in system_vlan() df1625d system-linux: check ioctl return value in system_if_flags() 209c508 system-linux: fix segfault on alloc failure in system_if_check() 4a8e20e system-linux: fix segfault on error in system_add_ip6_tunnel() 36e4700 handler: fix resource leak on error in netifd_init_script_handlers() 86a0e7c system-linux: remove unnecessary open call in system_if_dump_info() 1e2cf67 system-linux: fix memory leak on error in system_add_vxlan() Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* lldpd: bump to 1.0.1Stijn Tintel2018-04-151-2/+2
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* nghttp2: bump to 1.31.1Hans Dedecker2018-04-151-2/+2
| | | | | | | | 1e22b36c Update manual pages 0f818baf Bump up version number to 1.31.1 c411d169 Fix frame handling Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mt76: update to the latest versionFelix Fietkau2018-04-151-3/+3
| | | | | | | | | | | | | | | 1d23142 mt76: add led active low to debugfs 549f43b mt7603: ensure that the ACK flag is set for A-MPDUs with any acked subframe df9f9f6 mt7603: always try tx rate1 first 9c52f36 mt7603: pull the final rate index from the status descriptor f36f308 mt7603: improve validation of rx frames 9a23989 mt7603: remove warning on rx with invalid channel info 7a31731 mt76: check for pending reset before attempting to schedule tx 873a7c9 mt7603: call mt76_txq_schedule_all as a barrier to prevent tx during reset d9e5da3 mt76: add rcu locking in tid reorder function a8e8921 mt7603: add more checks to avoid dereferencing invalid pointers in wcid lookup Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files: remove /etc/sysctl.d/ from conffilesMatthias Schiffer2018-04-131-3/+1
| | | | | | | | Let's use /etc/sysctl.d for package-provided snippets and leave /etc/sysctl.conf to the admin. Don't backup /etc/sysctl.d on upgrades, so old defaults get replaced properly. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: move netfilter sysctl defaults to specific kmod packagesMatthias Schiffer2018-04-135-13/+27
| | | | | | | Avoid warnings when applying settings for uninstalled kmods. See also FS#1073. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: move sysctl defaults to /etc/sysctl.d/10-default.confMatthias Schiffer2018-04-133-32/+35
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: evaluate /etc/sysctl.d/* before /etc/sysctl.confMatthias Schiffer2018-04-132-2/+2
| | | | | | | We can use /etc/sysctl.d/* for package-supplied sysctl snippets, giving admins the option to use /etc/sysctl.conf to override settings. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: remove /etc/uci-defaults/11_migrate-sysctlMatthias Schiffer2018-04-131-16/+0
| | | | | | | 11_migrate-sysctl has not been updated with new file hashes since 2012. Let's get rid of it. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ath10k-ct: Update firmwareBen Greear2018-04-131-24/+24
| | | | | | | | | | | | | | | This firmware has only small changes from the last commit, but it does have an important fix for at least some PTK rekey logic. The old firmware would have issues if the driver managed to set a clear key while encryption was 'enabled'. This new firmware for both wave-1 and wave-2 should not be susceptible to this type of bug any more. And remove mesh-bcast IE flag from wave-2, still need more work before we can enable that flag in ath10k-ct firmware it seems. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ipq40xx: unbundle firmware and board fileMathias Kresin2018-04-131-1/+1
| | | | | | | | | | | Don't select the firmware with the board file, it prevents an easy use of the -ct ath10k firmware. Select the firmware within the default packages instead. Remove the per device selection of the firmware now that it the firmware is selected by default. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq40xx: add support for Netgear EX6100v2/EX6150v2David Bauer2018-04-132-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: SOC: Qualcomm IPQ4018 (DAKOTA) ARM Quad-Core RAM: 256 MB Winbond W632GU6KB12J FLASH: 16 MiB Macronix MX25L12805D ETH: Qualcomm QCA8072 WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11b/g/n/ac 2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11n/ac 1x1 (EX6100) 2x2 (EX6150) INPUT: Power, WPS, reset button AP / Range-extender toggle LED: Power, Router, Extender (dual), WPS, Left-/Right-arrow SERIAL: Header next to QCA8072 chip. VCC, TX, RX, GND (Square hole is VCC) WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! The Serial setting is 115200-8-N-1. Tested and working: - Ethernet - 2.4 GHz WiFi (Correct MAC-address) - 5 GHz WiFi (Correct MAC-address) - Factory installation from WebIF - Factory installation from tftp - OpenWRT sysupgrade (Preserving and non-preserving) - LEDs - Buttons Not Working: - AP/Extender toggle-switch Untested: - Support on EX6100v2. They share the same GPL-Code and vendor-images. The 6100v2 seems to lack one 5GHz stream and differs in the 5GHz board-blob. I only own a EX6150v2, therefore i am only able to verify functionality on this device. Install via Web-Interface: Upload the factory image to the device to the Netgear Web-Interface. The device might asks you to confirm the update a second time due to detecting the OpenWRT firmware as older. The device will automatically reboot after the image is written to flash. Install via TFTP: Connect to the devices serial. Hit Enter-Key in bootloader to stop autobooting. Command "fw_recovery" will start a tftp server, waiting for a DNI image to be pushed. Assign your computer the IP-address 192.168.1.10/24. Push image with tftp -4 -v -m binary 192.168.1.1 -c put <OPENWRT_FACTORY> Device will erase factory-partition first, then writes the pushed image to flash and reboots. Parts of this commit are based on Thomas Hebb's work on the openwrt-devel mailinglist. See https://lists.openwrt.org/pipermail/openwrt-devel/2018-January/043418.html Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq-wifi: Add 8devices JalapenoRobert Marko2018-04-132-1/+2
| | | | | | | Add custom board-2.bin for 8devices Jalapeno. Upstreaming is in progress. Signed-off-by: Robert Marko <robimarko@gmail.com>
* hostapd: fix compile of -mini variantsDaniel Golle2018-04-131-0/+23
| | | | | | Fixes commit d88934aa5a (hostapd: update to git snapshot of 2018-04-09) Signed-off-by: Daniel Golle <daniel@makrotopia.org>