aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
...
* libubox: update to latest git HEADRoman Yeryomin2019-12-231-3/+3
| | | | | | | eb30a03 libubox, jshn: add option to write output to a file Signed-off-by: Roman Yeryomin <roman@advem.lv> (cherry picked from commit c0e7ec91a0927002942631bbc995b90f5f7dd7ed)
* kernel: remove LINUX_4_9 dependency of kmod-daxSungbo Eo2019-12-231-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch resolves recursive dependency warning on a feed package: $ make defconfig Collecting package info: done tmp/.config-package.in:104721:error: recursive dependency detected! For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" tmp/.config-package.in:104721:symbol PACKAGE_nfs-kernel-server depends on NFS_KERNEL_SERVER_V4 For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" feeds/packages/net/nfs-kernel-server/Config.in:4:symbol NFS_KERNEL_SERVER_V4 depends on PACKAGE_nfs-kernel-server # # configuration written to .config # 19.07 branch uses kernel 4.14 only, so CONFIG_LINUX_4_9 symbol is not needed anyway. Ref: https://github.com/openwrt/packages/issues/10490 Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: fix *-gpio-custom module unloadingSungbo Eo2019-12-234-6/+6
| | | | | | | | | | | | | | | | | | | | | | Unloading and reloading the modules fails, as platform_device_put() does not release resources fully. root@OpenWrt:/# insmod i2c-gpio-custom bus0=0,18,0,5 [ 196.860620] Custom GPIO-based I2C driver version 0.1.1 [ 196.871162] ------------[ cut here ]------------ [ 196.880517] WARNING: CPU: 0 PID: 1365 at fs/sysfs/dir.c:31 0x80112158 [ 196.893431] sysfs: cannot create duplicate filename '/devices/platform/i2c-gpio.0' ... [ 197.513200] kobject_add_internal failed for i2c-gpio.0 with -EEXIST, don't try to register things with the same name in the same directory. This patch fixes it by replacing platform_device_put() to platform_device_unregister(). Fixes: da7740853715 ("i2c-gpio-custom: minor bugfix") Fixes: 3bc81edc70e8 ("package: fix w1-gpio-custom package (closes #6770)") Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit a22b7a60d98836343c4f7b9ec0fcae68d9131522)
* adb: fix for SuperSpeed devicesBjørn Mork2019-12-233-2/+41
| | | | | | | | | | | | | | | The USB descriptor parsing in adb fails to detect SuperSpeed devices because of the SuperSpeed Endpoint Companion Descriptor. This cherry-picks the upstream fix for the problem. Unfortunately there never were a release with this fix before the conversion to C++, so upgrading to a newer version isn't an option. This makes adb work with SuperSpeed devices like the Sierra Wireless EM7565. Tested and verified. Signed-off-by: Bjørn Mork <bjorn@mork.no> (cherry picked from commit d034a1f4577108a465e8347d11a51dc0e5a29298)
* uhttpd: reset PKG_RELEASEJo-Philipp Wich2019-12-221-1/+1
| | | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 97af1fc979d0683649c6bea8a9245a6a9fa5413a)
* uhttpd: update to latest Git HEADJo-Philipp Wich2019-12-221-3/+3
| | | | | | | 5f9ae57 client: fix invalid data access through invalid content-length values Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit f34f9a414dd32311bda950776eb77e63c0c772cb)
* mac80211: brcm: add support for BCM4359 SDIO chipsetRafał Miłecki2019-12-197-0/+519
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 17e2246eca901fec79fbac5b7a90f68f60785c4e)
* mac80211: brcm: backport 5.5 and 5.6 kernel patchesRafał Miłecki2019-12-1910-1/+325
| | | | | | | | | | This update doesn't include: 3b1e0a7bdfee brcmfmac: add support for SAE authentication offload be898fed355e brcmfmac: send port authorized event for FT-802.1X due to nl80211 dependencies. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit c3aa33bf705027751b344bc668541e5d08ed9495)
* odhcpd: optimize syslog priority valuesHans Dedecker2019-12-161-3/+3
| | | | | | e53fec8 treewide: optimize syslog priority values Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ath10k-firmware: update Candela Tech firmware imagesKoen Vandeputte2019-12-101-24/+24
| | | | | | | | | | | | | | | The release notes since last time for wave-1: * November 29, 2019: Fix IBSS merge issue, related to TSF id leakage bug in firmware code. Thanks for Ahmed Zaki @ Mage-Networks for helping to diagnose and test. The release notes since last time for wave-2: * December 6, 2019: Fix 160Mhz problem caused by logic that did not take into account the fact that 160Mhz has only 1/2 of the NSS of lower bandwidths in the rate table. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit 30109782df3c74becd60dd13216346e1ea2fcc96)
* mac80211: unify setup of iw htmode for mesh and adhocSantiago Piccinini2019-11-301-49/+16
| | | | | | | | | | This also fixes mac80211_prepare_vif iw set channel in monitor or mesh mode. Signed-off-by: Santiago Piccinini <spiccinini@altermundi.net> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [daniel@makrotopia.org: fixed commit message] (cherry picked from commit c7fb12beb1d347f1cedc7890dbe2d441f70ccf62)
* ucert: update to latest git HEADDaniel Golle2019-11-301-3/+3
| | | | | | | | | | | | | e4bd927 cast ucert_argv to proper type when passing to execv Fixes warnings: warning: passing argument 2 of 'execv' from incompatible pointer type [-Wincompatible-pointer-types] 254 | execv(usign_argv[0], usign_argv) Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 9c272dd3e42a51c1343ed4fad54ac38bb97349dd)
* OpenWrt v19.07.0-rc2: revert to branch defaultsHauke Mehrtens2019-11-301-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v19.07.0-rc2: adjust config defaultsv19.07.0-rc2Hauke Mehrtens2019-11-301-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* busybox: add glibc dependency for vi regex optionSatadru Pramanik2019-11-301-1/+2
| | | | | | | | | | | | | | | | | | | Build with musl libc fails with BUSYBOX_DEFAULT_FEATURE_VI_REGEX_SEARCH enabled. Enabling BusyBox's vi regex search option depends upon GNU regex. Musl libc does not support GNU regex[1]. So this patch adds explicit dependency on GNU libc and while at it remove the FIXME comment. 1. https://wiki.musl-libc.org/functional-differences-from-glibc.html Ref: https://dev.archive.openwrt.org/ticket/21741.html Ref: https://forum.openwrt.org/t/busybox-not-compiling/ Ref: https://github.com/openwrt/packages/issues/4453 Signed-off-by: Satadru Pramanik <satadru@umich.edu> [commit subject/description tweaks, From: fix, USE_GLIBC fix, removed comments] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit f1410902e6c089a53935ab44e83207e877445bc5)
* usign: Activate LTO compile optionHauke Mehrtens2019-11-301-0/+3
| | | | | | | | | | | | | This decreases the size of the usign application by 16% on MIPS BE. old: 24,597 /usr/bin/usign new: 20,501 /usr/bin/usign Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 6ffd8a8f92ab5337ab967ab2922d7de7f0480bc9)
* swconfig: Activate LTO compile optionHauke Mehrtens2019-11-301-0/+3
| | | | | | | | | | | | | This decreases the size of the swconfig application by 25% on MIPS BE. old: 16,916 /sbin/swconfig new: 12,565 /sbin/swconfig Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit e926681387891fe9af89d884ebc3dce4c8c7f450)
* mtd: Activate LTO compile optionHauke Mehrtens2019-11-301-1/+2
| | | | | | | | | | | | | This decreases the size of the mtd application by 25% on MIPS BE. old: 20,597 /sbin/mtd new: 16,421 /sbin/mtd Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 1eb34b7287ed97ad1e2ae60a436babbb5c68076f)
* uboot-envtools: ath79: add support for YunCore XD4200 and A782Piotr Dymacz2019-11-261-1/+3
| | | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> (cherry picked from commit 5d2a900163d0a161e6fa5e63436b57deea31287e)
* base-files: config_generate: split macaddr with multiple ifacesSungbo Eo2019-11-262-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | netifd does not handle network.@device[x].name properly if it contains multiple ifaces separated by spaces. Due to this, board.d lan_mac setup does not work if multiple ifaces are set to LAN by ucidef_set_interface_lan. To fix this, create a device node for each member iface when running config_generate instead. Those are named based on the member ifname: ucidef_set_interface_lan "eth0 eth1.1" ucidef_set_interface_macaddr "lan" "yy:yy:yy:yy:yy:01" will return config device 'lan_eth0_dev' option name 'eth0' option macaddr 'yy:yy:yy:yy:yy:01' config device 'lan_eth1_1_dev' option name 'eth1.1' option macaddr 'yy:yy:yy:yy:yy:01' ref: https://github.com/openwrt/openwrt/pull/2542 Signed-off-by: Sungbo Eo <mans0n@gorani.run> [always use new scheme, extend description, change commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 298814e6be7640d89328de9e7c90d4349e30683f)
* uboot-envtools: ramips: add support for ALFA Network Quad-E4GPiotr Dymacz2019-11-241-0/+1
| | | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> (cherry picked from commit 10bcf1eb40b728b3583c1a7693111f27a9801dc5)
* uboot-envtools: ramips: add support for ALFA Network R36M-E4GPiotr Dymacz2019-11-241-0/+1
| | | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> (cherry picked from commit 3cfea3a32125a2c59dfaa9103804ad51609ebe9d)
* mac80211: add default value for noscanSebastian Kemper2019-11-231-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit b3d8b3a introduced a new test: [ -n "$noscan" -a "$noscan" -gt 0 ] && hostapd_noscan=1 But if length of "$noscan" is zero (noscan is not set) this doesn't stop the shell to evaluate the rest of the test. root@hank2:~# [ -n "$noscan" -a "$noscan" -gt 0 ] ash: out of range root@hank2:~# So when radios are brought up this shows in the log: Sat Nov 23 10:51:38 2019 daemon.info procd: - init complete - Sat Nov 23 10:52:24 2019 daemon.notice netifd: radio1 (1243): sh: out of range Sat Nov 23 10:52:25 2019 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2) Sat Nov 23 10:52:25 2019 daemon.notice netifd: radio0 (1242): sh: out of range Sat Nov 23 10:52:26 2019 authpriv.info dropbear[1536]: Not backgrounding This commit sets noscan to 0 if unset and removes the gratuitous length check, preventing the warning. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> (cherry picked from commit 28d84331f4bba5923059e701f5d4878b2df3fa79) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* e2fsprogs: Fix CVE-2019-5094 in libsupportHauke Mehrtens2019-11-222-1/+204
| | | | | | | | | This adds the following patch from debian: https://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git/commit/?h=debian/stable&id=09fe1fd2a1f9efc3091b4fc61f1876d0785956a8 libsupport: add checks to prevent buffer overrun bugs in quota code Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 0062aad8ecc9bbe36c55895fd78fcaf9a406b006)
* ipq40xx: add support for AVM FRITZ!Repeater 1200David Bauer2019-11-221-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: Qualcomm IPQ4019 RAM: 256M DDR3 FLASH: 128M NAND WiFi: 2T2R IPQ4019 bgn 2T2R IPQ4019 a/n/ac ETH: Atheros AR8033 RGMII PHY BTN: 1x Connect (WPS) LED: Power (green/red/yellow) Installation ------------ 1. Grab the uboot for the Device from the 'u-boot-fritz1200' subdirectory. Place it in the same directory as the 'eva_ramboot.py' script. It is located in the 'scripts/flashing' subdirectory of the OpenWRT tree. 2. Assign yourself the IP address 192.168.178.10/24. Connect your Computer to one of the boxes LAN ports. 3. Connect Power to the Box. As soon as the LAN port of your computer shows link, load the U-Boot to the box using following command. > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz1200.bin 4. The U-Boot will now start. Now assign yourself the IP address 192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP server root directory and rename it to 'FRITZ1200.bin'. 5. The Box will now boot OpenWRT from RAM. This can take up to two minutes. 6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using scp. SSH into the Box and first write the Bootloader to both previous kernel partitions. > mtd write /path/to/uboot-fritz1200.bin uboot0 > mtd write /path/to/uboot-fritz1200.bin uboot1 7. Remove the AVM filesystem partitions to make room for our kernel + rootfs + overlayfs. > ubirmvol /dev/ubi0 --name=avm_filesys_0 > ubirmvol /dev/ubi0 --name=avm_filesys_1 8. Flash OpenWRT peristently using sysupgrade. > sysupgrade -n /path/to/openwrt-sysupgrade.bin Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 7f187229a8e9b7966248b1e024217e07a9fc3e50) Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ipq-wifi: add AVM FRITZ!Repeater 1200 bdfDavid Bauer2019-11-222-0/+2
| | | | | | Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit c0f40781645297ad68678e3de2557b611e9f785c) Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* uboot-fritz4040: update to latest HEADDavid Bauer2019-11-221-3/+3
| | | | | | | | | | f92be9d add support for AVM FRITZ!Repeater 1200 d651302 enable support for Atheros AR8033 PHY e4c857c add machtype override hack Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 36f43b61a74ff12d75989d0aabe052945aacc8cf) Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mac80211: update to version 4.19.85Hauke Mehrtens2019-11-2218-421/+76
| | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* firewall: update to latest Git HEADJo-Philipp Wich2019-11-221-3/+3
| | | | | | | | 8174814 utils: persist effective extra_src and extra_dest options in state file 72a486f zones: fix emitting match rules for zones with only "extra" options Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 482114d3f78df2a19904cc8edf7d9adcfdbb8625)
* firewall: update to latest git HEADHans Dedecker2019-11-221-3/+3
| | | | | | | daed0cf utils: fix resource leak Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (cherry picked from commit 27bf8abe69f3b048cbcbf9d2e796ecba5f0a42e7)
* wireless-regdb: fix build when python2 from package feeds existsPetr Štetiar2019-11-221-1/+1
| | | | | | | | | | | | | | | | wireless-regdb fails to build if there is python2 installed from package feeds, as staging_dir/hostpkg/bin/python is python2 and staging_dir/hostpkg/bin takes precedence over staging_dir/host/bin (proper place with python -> python3 symlink) which leads to the build failure of wireless-regdb, so this patch makes it explicit which python should be used. Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Tested-by: Russell Senior <russell@personaltelco.net> Tested-by: Lucian Cristian <lucian.cristian@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit b6bae4a2c9f11f7e55319c2b4c709396ce649688)
* wireless-regdb: fix patch fuzzKevin Darbyshire-Bryant2019-11-221-1/+1
| | | | | | | Refresh patches to tidy up some fuzz warnings Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 12840674d0550e6f5aa077cd2b578988f0c07074)
* wireless-regdb: fix Makefile indentationJohn Crispin2019-11-221-5/+5
| | | | | Signed-off-by: John Crispin <john@phrozen.org> (cherry picked from commit 8562e77953e76c1ec7ba01ce18dc468d5628f3dc)
* wireless-regdb: set PKGARCH:=allPetr Štetiar2019-11-221-0/+1
| | | | | | | | | As it's an architecture-independent binary file. Ref: https://github.com/openwrt/openwrt/pull/1521#issuecomment-514687053 Suggested-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 57d1c05ec945b4853708d686c0782c4b1dcff0a9)
* wireless-regdb: prefer python provided by make variablePetr Štetiar2019-11-221-1/+1
| | | | | | | Usage of predefined make variables is preferred. Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit d3853d17a37a67541736b8b13f412a49ab382b9a)
* wireless-regdb: Make it build with python2Hauke Mehrtens2019-11-221-0/+58
| | | | | | | | | This backports a patch to build it work with python2 in addition to python3. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit d3a8a62692b06b3e5fe7077a2ce641fbf09cdc19)
* wireless-regdb: update to 2019.06.03Zachary Riedlshah2019-11-222-260/+8
| | | | | | | | | | | | | | | Fixes build issues on a python3 host (issues with the print statement formatting in the current build). Includes 100-regdb-write-firmware-file-format-version-code-20.patch and other fixes. Closes bugs.openwrt.org/index.php?do=details&task_id=1605. Uses the tarball as requested. Signed-off-by: Zachary Riedlshah <git@zacharyrs.me> (cherry picked from commit ef3f868da0d78adf2490a762ff567cf5b636c213)
* mac80211: backport upstream fixesKoen Vandeputte2019-11-193-0/+205
| | | | | | | This potentially fixes some issues seen on IBSS when interfaces go out of range and then re-appear. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mac80211: Adapt to changes to skb_get_hash_perturb()Hauke Mehrtens2019-11-181-0/+68
| | | | | | | | | | | The skb_get_hash_perturb() function now takes a siphash_key_t instead of an u32. This was changed in commit 55667441c84f ("net/flow_dissector: switch to siphash"). Use the correct type in the fq header file depending on the kernel version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> (cherry picked from commit eaa047179ad30d156d0c3da7ec225acfae7a9f00)
* mac80211: brcmfmac: fix PCIe reset crash and WARNINGRafał Miłecki2019-11-183-1/+85
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit cde8c2f2fba019c4cd3b9f6ad463ff86cc783061)
* kernel: fix typo in fb-sys-fops autoloadSungbo Eo2019-11-141-1/+1
| | | | | | | | AutoLoad parameter must match the exact kernel module name. Fix it. Fixes: 125f1ce9ad0c ("kernel: video: add DRM core and IMX DRM support for HDMI/LVDS") Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit 6990510aca41074351f92a5abc6f4afb4b606506)
* hostapd: add IEEE 802.11k supportKyle Copperfield2019-11-141-0/+13
| | | | | | | | | | | | Enables radio resource management to be reported by hostapd to clients. Ref: https://github.com/lede-project/source/pull/1430 Co-developed-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> Signed-off-by: Kyle Copperfield <kmcopper@danwin1210.me> [removed the DMARC crap] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 87f9292300cf56ad17f44363ced213c59a95ef44)
* hostapd: Add mesh support for wpad fullHauke Mehrtens2019-11-141-2/+2
| | | | | | | | | | | | | | | This increases the size of the binary slightly: old: 427722 wpad-wolfssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk 431696 wpad-openssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk new: 442109 wpad-wolfssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk 445997 wpad-openssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 49cc712b44c76e99bfb716c06700817692975e05)
* hostapd: use getrandom syscallHauke Mehrtens2019-11-147-7/+7
| | | | | | | | | hostapd will not use the getrandom() syscall and as a fallback use /dev/random, the syscall is supported since Linux 3.17 and in the musl, glibc and uclibc version used by OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 998686364da7d002ba9f6dbb43cc5f32294dd4ab)
* hostapd: Remove unneeded patchHauke Mehrtens2019-11-148-28/+14
| | | | | | | | All the content of this function is proceeded by IEEE8021X_EAPOL no code accesses the ssid variable outside of this ifdef. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 0d86bf518aaefa57bef577d09a18aff03eccb70c)
* hostapd: use config option CONFIG_NO_LINUX_PACKET_SOCKET_WARHauke Mehrtens2019-11-145-16/+4
| | | | | | | Instead of patching the workaround away, just use the config option. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 9b4a27455c17c00698ce7ce24e0bcad419c6319e)
* hostapd: Update to version 2.9 (2019-08-08)Hauke Mehrtens2019-11-1447-639/+272
| | | | | | | | | | | | | | | | | | | The size of the ipkgs increase a bit (between 0.7% and 1.1%): old 2019-04-21 (2.8): 288264 wpad-basic_2019-04-21-63962824-1_mipsel_24kc.ipk 256188 wpad-mini_2019-04-21-63962824-1_mipsel_24kc.ipk 427475 wpad-openssl_2019-04-21-63962824-1_mipsel_24kc.ipk 423071 wpad-wolfssl_2019-04-21-63962824-1_mipsel_24kc.ipk new 2019-08-08 (2.9): 290217 wpad-basic_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk 258745 wpad-mini_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk 431732 wpad-openssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk 427641 wpad-wolfssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 167028b750028ae3dac24f5ff96bbb1ba04e8bd7)
* hostapd: Update to version 2.8 (2019-04-21)Hauke Mehrtens2019-11-1489-5673/+532
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This also syncs the configuration files with the default configuration files, but no extra options are activated or deactivated. The mesh patches were partially merged into hostapd 2.8, the remaining patches were extracted from patchwork and are now applied by OpenWrt. The patches still have open questions which are not fixed by the author. They were taken from this page: https://patchwork.ozlabs.org/project/hostap/list/?series=62725&state=* The changes in 007-mesh-apply-channel-attributes-before-running-Mesh.patch where first applied to hostapd, but later reverted in hostapd commit 3e949655ccc5 because they caused memory leaks. The size of the ipkgs increase a bit (between 1.3% and 2.3%): old 2018-12-02 (2.7): 283337 wpad-basic_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk 252857 wpad-mini_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk 417473 wpad-openssl_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk 415105 wpad-wolfssl_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk new 2019-04-21 (2.8): 288264 wpad-basic_2019-04-21-63962824-1_mipsel_24kc.ipk 256188 wpad-mini_2019-04-21-63962824-1_mipsel_24kc.ipk 427475 wpad-openssl_2019-04-21-63962824-1_mipsel_24kc.ipk 423071 wpad-wolfssl_2019-04-21-63962824-1_mipsel_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> (cherry picked from commit 8af79550e6c280717660f66032d89d21007b15d2)
* hostapd: mirror ieee80211w ap mode defaults in station modeJo-Philipp Wich2019-11-142-1/+10
| | | | | | | | | | | | For AP mode, OpenWrt automatically sets ieee80211w to either 1 or 2, depending on whether the encryption is set to sae-mixed, or sae/owe/eap suite-b. Mirror the same defaults for client mode connections, in order to allow an OpenWrt station to associate to an OpenWrt ap with SAE, OWE or Suite-B encryption without the need to manually specify "option ieee80211w" on the station. Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit abb4f4075e791789fdb00731035e08a8cf51555f)
* hostapd: fix OWE settings in client modeJo-Philipp Wich2019-11-142-1/+2
| | | | | | | | | This changes fixes the generation of the wpa_supplicant client configuration in WPA3 OWE client mode. Instead of incorrectly emitting key_mgmt=NONE, use the proper key_mgmt=OWE setting instead. Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 4209b28d23b8bf28575af5e8904194f49b81532e)
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-29 06:01:14 +0000