aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: rt2x00: add incomplete support for external PA on MT7620Daniel Golle2017-04-241-0/+125
| | | | | | | | | | | | | | Do as the vendor driver does -- however, some devices apparently patched support for external PA into the driver similar to how it was done on Rt3352, using EEPROM_NIC_CONF1 rather than EEPROM_NIC_CONF2, hence we check for both fields. Somehow the vendor driver also no longer offers the option of only one of the TX paths having an external PA (which was probably to weird to ever be implemented in practise, though it doesn't seem like a particularly bad idea to me). Do the same in rt2x00 and enable support for external PA on both TX paths whenever it is set for TX0 in EEPROM. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: reorder patches and prepare for MT7620 external PADaniel Golle2017-04-245-0/+128
| | | | | | | | | Import change to make external PA capability consistent with the vendor driver instead of having the logic inverted. While at it, apply patches in the same order as they got merged upstream. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* iptables: fix wrong depends for nftables support (FS#707)Ansuel Smith2017-04-221-1/+1
| | | | | | | The dep for the nftables support was wrong, if someone actually enable that option gain a compilation error. This fix this problem. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* busybox: fix build of nslookup_lede applet without IPv6 (#728)Jo-Philipp Wich2017-04-211-9/+33
| | | | | | | | | Protect any IPv6 related with appropriate guards to fix compilation with disabled IPv6 support in Busybox. Fixes #728. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: dont replace the board nameMathias Kresin2017-04-211-1/+2
| | | | | | | | | | Use fixed led names and add each board variant instead of manipulating the board name. It makes the ramips board name function less different to the one used in other targets and allows to merge them with a common function. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mac80211: rt2800: fix mt7620 E2 channel registersTomislav Požega2017-04-181-0/+41
| | | | | | | | update RF register 47 and 54 values according to vendor driver Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [daniel@makrotopia.org: moved changes into a separate patch]
* mac80211: rt2800: fix mt7620 vco calibration registersTomislav Požega2017-04-181-0/+50
| | | | | | | | | | Use register values from init LNA function instead of the ones from restore LNA function. Apply register values based on rx path configuration. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [daniel@makrotopia.org: moved changes into a separate patch]
* mac80211: fix kconfig recursive dependency warningFelix Fietkau2017-04-181-2/+1
| | | | | | | | | | | | | Make brcmfmac depend on !TARGET_uml. Technically, brcmfmac could be built for uml because only SDIO support won't work on that target. However, selectively avoiding the dependency propagation of !TARGET_uml from kmod-mmc to avoid including a reference to BRCMFMAC_SDIO doesn't work. In practice, brcmfmac is completely useless on uml, so let's just disable it there. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: rt2x00: fix MT7620 LNA gain and VCO-after-ALCDaniel Golle2017-04-172-0/+88
| | | | | | | This should fix issues with bad RX as well as AP not coming up and/or scanning failing. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: fix uninitialized varname in init-scriptBastian Bittorf2017-04-171-1/+1
| | | | | | | | | minor/cosmetic: fixes the following misleading message: root@box:~ /etc/init.d/dnsmasq restart sh: out of range Signed-off-by: Bastian Bittorf <bb@npl.de>
* busybox: Move libresolv detection to LEDE MakefileFlorian Fainelli2017-04-122-18/+6
| | | | | | | | | | | Since the LEDE nslookup applet is already specific to LEDE, move the libresolv detection into the busybox Makefile that LEDE uses. This fixes builds with external toolchains that don't automatically search for headers and/or libraries without being told so. Fixes: de5b8e5d2fe1 ("busybox: add musl compatible nslookup replacement") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* mac80211: add rt2x00 debug symbols to PKG_CONFIG_DEPENDSJonas Gorski2017-04-121-0/+2
| | | | | | | Chaning these symbols require a recompilation of the modules, so make the system aware of it. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* mac80211: manually apply dependencies to prevent a recoursive oneJonas Gorski2017-04-121-1/+2
| | | | | | | Apply the !UML dependency to both the symbol and the DEPENDS so there is no recursive dependency anymore. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* grub2: update to 2.02~rc2Alif M. Ahmad2017-04-121-2/+2
| | | | | | Update to version 2.02~rc2. Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
* mac80211: conistent wireless.wiki.kernel.orgMatthias Fritzsche2017-04-121-7/+7
| | | | | | | Change all the URLs to wireless.wiki.kernel.org to have the same protocol, domain and path. Signed-off-by: Matthias Fritzsche <txt.file@txtfile.eu>
* iptables: set ABI_VERSION to force rebuild of dependent packagesFelix Fietkau2017-04-121-0/+4
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* iptables: bump to 1.6.1Ansuel Smith2017-04-129-304/+103
| | | | | | | | | Switch to git repo Removed musl patch Refreshed existing patch Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
* binutils: fix build with host gcc < 4.9Hauke Mehrtens2017-04-122-0/+1323
| | | | | | | | | binutils 2.27 checks if the target compiler supports -Wstack- usage=262144, and also uses this setting for the host compiler. If the host compiler is gcc < 4.9 binutils build will fail. This backports 2 commits which are fixing this problem for binutils 2.28. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* base-files: use restart if no reload hook for serviceAlexandru Ardelean2017-04-121-4/+3
| | | | | | | | | | | | | | | | | | | | | | | This was also working before, with a slightly different semantic. [ Original semantic ] If no reload hooks was implemented, the default one would kick in, it would return fail, and restart would happen. This would happen also in the case where a reload hook would be implemented, it would fail, and it would restart the service. [ New semantic ] The default reload hook calls restart. Services can implement their own reload. If reload fails, then the '/etc/init.d/<service> reload' would return a non-zero code, and the caller can choose a way to handle this. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* ath10k-firmware: update to latest versionPavel Kubelun2017-04-121-25/+2
| | | | | | Kvalo's repo has a newer version of qca9984 firmware. Use it instead. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* openvpn: add myself as maintainerFelix Fietkau2017-04-121-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* OpenVPN: Update to 2.4.1Daniel Engberg2017-04-124-20/+12
| | | | | | | | | Update OpenVPN to 2.4.1 Remove 200-small_build_enable_occ.patch as it's included upstream. Refresh patches Add mirror and switch to HTTPS Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* busybox: add musl compatible nslookup replacementJo-Philipp Wich2017-04-103-1/+931
| | | | | | | | Add an alternative nslookup applet implementation which is compatible with musl libc wrt. name server selection and which supports a number of additional features such as query type selection. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: make kmod-mmc unavailable on UMLJonas Gorski2017-04-101-0/+1
| | | | | | | | MMC requires IOMEM support, which UML doesn't have. Fixes mac80211 build, as mwifiex-sdio depends on MMC support. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* iproute2: add libgenl.h and ll_map.h to InstallDev sectionHans Dedecker2017-04-081-1/+1
| | | | | | | | Commit f4e312ddf855375667f43c842c7187934b8aca92 adds libnetlink to staging dir but did not add the header files libgenl.h and ll_map.h which define functions belonging to libnetlink lib Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dnsmasq: peacefully coexist with ISC DHCPdDaniel Golle2017-04-081-0/+9
| | | | | | | | Similar to odhcpd, allow using ISC DHCPd instead of dnsmasq. Disable DHCP and/or DHCP6 in case ISC DHCP is present and enabled. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath9k: drop obsolete patchMathias Kresin2017-04-084-43/+4
| | | | | | | Now that the wireless LEDs are added via platform leds this patch isn't required any longer. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath9k: ignore led_pin if ath9k GPIO controller is used with DTMathias Kresin2017-04-082-6/+8
| | | | | | | | Don't setup the default led pin if the ath9k GPIO controller is used via device tree to prevent collision. In case any of the pins exposed by the ath9k is used, the phyNtpt trigger needs to be set in userspace. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath9k: enable GPIO chip only if requested via DTMathias Kresin2017-04-082-10/+21
| | | | | | | | In case that the atheros device tree binding is used, enable access to the GPIO chip only if the gpio-controller device tree parameter is used for the ath9k node. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath9k: unset the default LED pin if used by platform ledsMathias Kresin2017-04-084-31/+27
| | | | | | | | | Unset the default LED gpio pin if the same gpio pin is used by a LED defined via platform LED. This prevents that the default led trigger gets assigned to this LED and the GPIO value gets changed on wifi up/down in case the led is not used for signaling the wifi state. Signed-off-by: Mathias Kresin <dev@kresin.me>
* firmware: rework fritz-tools packageMathias Kresin2017-04-086-30/+45
| | | | | | | | | | | | | | | | Split the fritz-tools into subpackages. fritz_tffs_read is usefull for all Fritz boards where fritz-cal_extract is only required for the Fritz 4040 at the moment. Rename the tffs related binary to the more catchy name fritz_tffs and move the whole package to utilities since the package doesn't really provide a firmware file. Make the fritz-tools available for all targets and build them shared. The tffs is used by avm on lantiq and ar71xx as well. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
* mdadm: extend uci config supportJo-Philipp Wich2017-04-083-7/+82
| | | | | | | Extend the mdadm package to allow to explicitely configure arrays as well as device list entries. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* opkg: backport upstream fixes, code cleanupsJo-Philipp Wich2017-04-081-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Update to latest Git in order to import the following fixes: 1d0263b check_data_file_clashes_change: remove duplicated offline root in paths a00a6a9 buildReplaces: do not add duplicated replacees 9fbedd8 opkg: compare-versions doesn't need any state 45b54f6 opkg_cmd: fix segmentation fault in opkg_compare_versions_cmd() 93de62b opkg_cmd: fix return of opkg compare-versions 51275a8 pkg_src_list_push: remove unused function 947d3d4 pkg_src_list_pop: remove unused function 980cfb2 str_list_push: remove unused function 52c31c1 str_list_prev: remove unused function 7d24212 str_list_last: remove unused function 48142a3 conffile_list_pop: remove unused function 46c5de5 pkg_dest_list_push: remove unused functions 368bb62 nv_pair_list_prev: remove unused function 2985c00 nv_pair_list_last: remove unused function f5082ac conffile_list_pop: remove unused function 89bf8b9 conffile_list_push: remove unused function 23d31fb active_list_sort: remove unused function 7fe45f2 active_list_add_depend: remove unused function 86b584d pkg_dependence_satisfied: remove unused function 816d330 Fix typo in pkg_hash_fetch_best_installation_candidate. 07f3b02 set_flags_from_control: remove function Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: add thermal monitor for nct6775/6776Philip Prindeville2017-04-071-0/+15
| | | | | | | Support for the nct6775/6776 hwmon chips, and other compatibles in the family as well as the Intel on-chip thermal sensors. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* uboot-ar71xx: fix build errorFelix Fietkau2017-04-061-0/+2
| | | | | | The HOSTCFLAGS override only works on newer u-boot versions Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: ensure that the metapackage gets built as .ipkFelix Fietkau2017-04-051-0/+4
| | | | | | Fixes errors during the image builder run Signed-off-by: Felix Fietkau <nbd@nbd.name>
* busybox: fix installation of cron and ntpd scripts in the default configFelix Fietkau2017-04-041-2/+2
| | | | | Fixes: 0b24850e9778 ("busybox: don't install NTP scripts if NTP isn't configured") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* u-boot.mk: pass HOSTCC and HOST_CFLAGS into the buildFelix Fietkau2017-04-041-0/+2
| | | | | | | Cuts build time on Mac OS X in half by avoiding repeated $(shell) calls from the build system Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-firmware: update the qca988x firmware to 10.2.4-1.0-00029Changmin Jang2017-04-041-4/+4
| | | | | | | | update the qca988x firmware to firmware-5.bin_10.2.4-1.0-00029. According to LEDE Forum, the new firmware supports mesh mode. Also, it seems to have several improvements. Signed-off-by: Changmin Jang <ckdalsdk12@gmail.com>
* uboot-lantiq: fix build error on mac os xFelix Fietkau2017-04-041-0/+18
| | | | | | asm/* includes are not safe for the host build Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport an upstream fix for queue start/stop handlingFelix Fietkau2017-04-031-0/+29
| | | | | | Fixes issues with 802.11s Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: fix fw3 warnings in dhcp scriptHans Dedecker2017-04-031-1/+1
| | | | | | Fix fw3 warnings in dhcp script in case fw3 is not enabled Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* build: move PKG_CONFIG_DEPENDS from feeds.mk to opkgFelix Fietkau2017-04-031-1/+8
| | | | | | | Normal packages don't rely on the feed configuration variables for the build step Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kexec-tools: get kexec running on MUSL and x86 hardwarePhilip Prindeville2017-04-032-0/+211
| | | | | | | Couple of important upstream patches (slated for 2.0.15) that are necessary for kexec to run on MUSL and on x86 hardware. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* busybox: don't install NTP scripts if NTP isn't configuredPhilip Prindeville2017-04-031-0/+4
| | | | | | | | If you're using Chrony or NTPD you don't want the busybox NTP server as well. Make it's installation truly conditional. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [simplify]
* modules: Add kmod-igbvf kernel module for Intel(R) 82576 Virtual Function ↵Ye Tao2017-04-031-0/+18
| | | | | | | | | | | | | | | | Ethernet adapters Intel(R) 82576 is an adapter which supports SR-IOV. Thus the host can assign Virtual Functions (VFs) to different VMs by the PCI-E Passthrough (e.g. VFIO for KVM), to gain different advantages (performance, VF to VF communications, host kernel offload, etc.). The driver of the passthroughed VFs is the igbvf (igb is NOT compatible). This is essential for VM guests, to enable them to utilize this feature. Signed-off-by: Ye Tao <tydus@hongo.wide.ad.jp>
* odhcpd: update to git HEAD version (FS#635)Hans Dedecker2017-04-011-3/+3
| | | | | | | | | | 3d9f406 rework IPv6 dns address selection (FS#635) bc6c3ac ndp: keep an exact copy of IPv6 interface addresses 6eb1e01 ndp: code cleanup eea7d03 rework IPv6 address dump logic 24d21c7 ndp: add syslog debug tracing Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mac80211: rt2x00: import upstream changes and rebase our patchesDaniel Golle2017-03-3049-189/+1676
| | | | | | | | Some of our local patches have been accepted upstream. And there are some more relevant changes (mostly for rt2800usb). Import them and rebase our remaining local patches on top. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: use logical interface name for dhcp relay configKarl Vogel2017-03-291-1/+2
| | | | | | | | | The relay section should use the logical interface name and not the linux network device name directly. This to be consistent with other sections of the dnsmasq config where 'interface' means the logical interface. Signed-off-by: Karl Vogel <karl.vogel@gmail.com>
* fstools: update to latest git HEADJohn Crispin2017-03-291-3/+3
| | | | | | | 20c16fc cmake: Make blockd link against libjson-c 92b4c2c libfstools: add basic documentation of mount functions Signed-off-by: John Crispin <john@phrozen.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 08:03:12 +0000