aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* devel/strace: fix build on mpc85xx targetAlexandru Ardelean2016-11-081-0/+14
| | | | | | | | | | | | | | | builbot faillog: https://downloads.lede-project.org/snapshots/faillogs/powerpc_8540/base/strace/compile.txt Seems that for PPC, the <linux/ptrace.h> header [from uapi] collides with musl's <sys/user.h>, for the pt_regs struct. Seems I tried to upstream this patch a while back: https://lists.openwrt.org/pipermail/openwrt-devel/2016-April/041093.html It seems to work on current LEDE trunk too. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* gcom: Fix 'mode' option for ncmCezary Jackiewicz2016-11-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For Huawei devices like E3372 proper command for set lte mode is: AT^SYSCFGEX="03",3fffffff,2,4,7fffffffffffffff,, Eval is required for proper quotation. Without this fix: Fri Nov 4 19:07:49 2016 daemon.notice netifd: Interface 'wan' is setting up now Fri Nov 4 19:07:52 2016 daemon.notice netifd: wan (2060): sending -> AT Fri Nov 4 19:07:52 2016 daemon.notice netifd: wan (2060): sending -> ATZ Fri Nov 4 19:07:53 2016 daemon.notice netifd: wan (2060): sending -> ATQ0 Fri Nov 4 19:07:53 2016 daemon.notice netifd: wan (2060): sending -> ATV1 Fri Nov 4 19:07:54 2016 daemon.notice netifd: wan (2060): sending -> ATE1 Fri Nov 4 19:07:55 2016 daemon.notice netifd: wan (2060): sending -> ATS0=0 Fri Nov 4 19:07:55 2016 daemon.notice netifd: wan (2060): sending -> AT+CGDCONT=1,"IP","internet" Fri Nov 4 19:07:57 2016 daemon.notice netifd: wan (2060): sending -> AT^SYSCFGEX=\"03\",3fffffff,2,4,7fffffffffffffff,, Fri Nov 4 19:07:58 2016 daemon.notice netifd: wan (2060): Error running AT-command Fri Nov 4 19:07:58 2016 daemon.notice netifd: wan (2060): Failed to set operating mode Fri Nov 4 19:07:58 2016 daemon.notice netifd: wan (2092): Stopping network ... With this fix: Fri Nov 4 19:10:59 2016 daemon.notice netifd: Interface 'wan' is setting up now Fri Nov 4 19:11:01 2016 daemon.notice netifd: wan (2539): sending -> AT Fri Nov 4 19:11:01 2016 daemon.notice netifd: wan (2539): sending -> ATZ Fri Nov 4 19:11:02 2016 daemon.notice netifd: wan (2539): sending -> ATQ0 Fri Nov 4 19:11:03 2016 daemon.notice netifd: wan (2539): sending -> ATV1 Fri Nov 4 19:11:03 2016 daemon.notice netifd: wan (2539): sending -> ATE1 Fri Nov 4 19:11:04 2016 daemon.notice netifd: wan (2539): sending -> ATS0=0 Fri Nov 4 19:11:05 2016 daemon.notice netifd: wan (2539): sending -> AT+CGDCONT=1,"IP","internet" Fri Nov 4 19:11:06 2016 daemon.notice netifd: wan (2539): sending -> AT^SYSCFGEX="03",3fffffff,2,4,7fffffffffffffff,, Fri Nov 4 19:11:07 2016 daemon.notice netifd: wan (2539): sending -> AT^NDISDUP=1,1,"internet" Fri Nov 4 19:11:08 2016 daemon.notice netifd: wan (2539): Connected, starting DHCP on wwan0 Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan' is now up Fri Nov 4 19:11:08 2016 daemon.notice netifd: Network device 'wwan0' link is up Fri Nov 4 19:11:08 2016 daemon.notice netifd: Network alias 'wwan0' link is up Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' is enabled Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' has link connectivity Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' is setting up now ... Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* kernel: fix kmod-sound-core build errorMathias Kresin2016-11-051-1/+1
| | | | | | Fix build error introduced with 2ab6aac. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: add SND_PCM_TIMER to kmod-sound-coreDmitry Sutyagin2016-11-051-0/+1
| | | | | | | | | | | | | | | | | | | FS#256 Fix audio not working due to unset SND_PCM_TIMER. CONFIG_SND_PCM_TIMER is required for ALSA to work (at least for some audio devices), otherwise applications using sound may fail. Can be reproduced by installing "alsa-utils-tests" and running "speaker-test": ... ALSA lib pcm_direct.c:1159:(snd1_pcm_direct_initialize_poll_fd) unable to open timer 'hw:CLASS=3,SCLASS=0,CARD=0,DEV=0,SUBDEV=0' ALSA lib pcm_dmix.c:1106:(snd_pcm_dmix_open) unable to initialize poll_fd Playback open error: -19,No such device The kernel size does not increase, only the size of the kernel module increases. Signed-off-by: Dmitry Sutyagin <f3flight@gmail.com>
* Revert "mt76: update to the latest version, adds a tx queue configuration fix"Felix Fietkau2016-11-051-2/+2
| | | | | | | This reverts commit 32867540ea18db2c8b025723768093cd5c12f22b. A report indicates that this causes a tx/rx throughput regression Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Revert "mwl8k: remove synchronous device init hack"Felix Fietkau2016-11-041-0/+20
| | | | | | | This reverts commit cb037d1842d93b37457c896a8949e135ed6e0065. See 6aa07b82027f for more information Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Revert "mac80211: remove ath10k delayed initialization hack"Felix Fietkau2016-11-041-0/+33
| | | | | | | | | This reverts commit efd9dec3195c603289ebb552f8650da9dd869828. ath10k can take a long time to probe, long enough for netifd to fail to initialize already configured wireless devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version, adds a tx queue configuration fixFelix Fietkau2016-11-041-2/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix A-MSDU tx aggregation (FS#174)Felix Fietkau2016-11-041-0/+34
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: minor cleanupFelix Fietkau2016-11-041-0/+29
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix a tx A-MPDU aggregation issueFelix Fietkau2016-11-041-0/+30
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: replace the previous fix with a revert of the faulty upstream commitFelix Fietkau2016-11-031-5/+6
| | | | | | This avoids potential breakage in rt2x00usb Signed-off-by: Felix Fietkau <nbd@nbd.name>
* elfutils: bump to 0.167Luiz Angelo Daros de Luca2016-11-038-134/+16
| | | | Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* mwl8k: remove synchronous device init hackFelix Fietkau2016-11-031-20/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: remove ath10k delayed initialization hackMathias Kresin2016-11-031-33/+0
| | | | | | | | | LEDE no longer requires all PHYs to be initialized to create the configuration files during bootup. This patch removes the now obsolete ath10k patch. Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* base-files, mac80211, broadcom-wl: wifi detection and configurationChristian Lamparter2016-11-035-6/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the wifi detection script is executed as part of the (early) boot process. Pluggable wifi USB devices, which are inserted at a later time are not automatically detected and therefore they don't show up in LuCI. A user has to deal with wifi detection manually, or restart the router. However, the current "sleep 1" window - which the boot process waits for wifi devices to "settle down" - is too short to detect wifi devices for some routers anyway. For example, this can happen with USB WLAN devices on the WNDR4700. This is because the usb controller needs to load its firmware from UBI and initialize, before it can operate. The issue can be seen on a BT HomeHub 5A as well as soon as the caldata are on an ubi volume. This is because the ath9k card has to be initialized by owl-loader first. Which has to wait for the firmware extraction script to retrieve the pci initialization values inside the caldata. This patch moves the wifi configuration to hotplug scripts. For mac80211, the wifi configuration will now automatically run any time a "ieee80211" device is added. Likewise broadcom-wl's script checks for new "net" devices which have the "wl$NUMBER" moniker. Issues with spawning multiple interface configuration - in case the detection script is run concurrently - have been resolved by using a named section for the initial configuration. Concurrent configuration scripts will now simply overwrite the same existing configuration. A workaround which preserves the "sleep 1" window for just the first boot has been added. This allows the existing brcm47xx boot and mvebu uci-default scripts to correctly setup the initial mac addresses and regulatory domain. And finally, the patch renames the "wifi detect" into "wifi config". As the script no longer produces any output that has to be redirected or appended to the configuration file. Thanks to Martin Blumenstingl for helping with the implementation and testing of the patch. Acked-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files, mac80211, broadcom-wl: use uci to populate wireless configChristian Lamparter2016-11-033-42/+37
| | | | | | | | | | | | | | | | | | | | Previously, wifi detect simply dumped its generated wireless configuration to STDOUT. A second step was needed to append the configuration to /etc/config/wireless (or create it, if it didn't exist). With this patch, The wifi detection script will now use uci to update the wireless configuration directly. This patch also makes the initially created wifi-iface a named section ('default_radio$X' for mac80211 and 'default_wl$X' for broadcom). With this change, uci will not print the cfgHASH to STDOUT (which would now corrupt the wireless configuration). It will also prevent adding duplicated wifi interface configurations, if the wifi configuration is run concurrently. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* base-files: generate /etc/config/wireless, if it doesn't existMathias Kresin2016-11-031-0/+2
| | | | | | | | | | | | This patch adds a check in "wifi detect" to test if the wireless configuration file does exist. If it doesn't exist, an empty /etc/config/wireless file will be created. This is necessary because uci doesn't create new files, instead the tool just exits with "uci: Entry not found". Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: fix regdomain change issues with CONFIG_ATH_USER_REGDFelix Fietkau2016-11-032-21/+38
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix a minor issue in the header padding patchFelix Fietkau2016-11-031-0/+9
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix AP powersave issues introduced in the last wireless-testing ↵Felix Fietkau2016-11-031-0/+27
| | | | | | update (FS#241) Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-envtools: move to Boot Loaders submenuAlberto Bursi2016-11-031-0/+1
| | | | | | Boot Loaders submenu is where other bootloader tools (fconfig and grub2-editenv) are. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* dnsmasq: support log-dhcp optionKarl Palsson2016-11-021-0/+1
| | | | | | Helpful when trying to resolve issues with quirky dhcp client devices. Signed-off-by: Karl Palsson <karlp@etactica.com>
* iproute2: rename ip to ip-tiny and let both ip-tiny and ip-full provide "ip"Jo-Philipp Wich2016-11-021-6/+7
| | | | | | | | | | | | | | | | | | Rename the "ip" package declaration to "ip-tiny" and let both "ip-tiny" and "ip-full" provide the virtual "ip" package. This allows users to freely choose the "ip" command variant while other packages can continue to depend on "ip" without needing to enforce a specific variant. Note that this commit does not add busybox as "ip" provider due to the following reasons: - The builtin Busybox ip applet cannot be added or removed at runtime - Both "ip-tiny" and "ip-full" are able to install without file clashes even if the busybox applet is enabled - The system is preferring full "ip-tiny" and "ip-full" at runtime, even if Busybox ip is still present. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uboot-sunxi: fix default config for OLIMEX A13 SOM (FS#239)Jo-Philipp Wich2016-11-0220-277/+58
| | | | | | | | | | | | | | | | | | The current uboot default config for the A13 SOM erroneously enables support for the AXP209 power regulator IC which is not present on the board. This superfluous support module sets an incorrect initial clock frequency and confuses the kernel, ultimately leading to a boot failure later on. Properly disable the PMIC support and enable the EHCI support by translating the deprecated SYS_EXTRA_OPTIONS values into proper SUNXI_NO_PMIC and USB_EHCI_HCD symbols respectively. Also rename 002-add-olimex-a13-som.diff to 002-add-olimex-a13-som.patch and refresh the remaining patches of the series while we're at it. Reported-by: Mario Fischer <mario-fischer@web.de> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* base-files: uci-defaults: support requesting untagged switch port configurationJo-Philipp Wich2016-11-021-8/+14
| | | | | | | | | | | | | Introduce support for a new [0-9]u@netdev syntax to ucidev_add_switch() to let board.d network files request default network switch configurations which do not use tagged CPU ports. This commit itself has no effect on generated configurations at the moment since we still emit untagged configurations by default but it allows boards to opt-out from default tagged configs in case we start emitting tagged settings by default. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* fstools: add build-depends on util-linuxJo-Philipp Wich2016-11-011-0/+1
| | | | | | | The libblkid probe support in fstools git head requires blkid/blkid.h for compilation, so add a build dependency on util-linux which provides libblkid. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* layerscape: add 64b/32b target for ls1012ardb deviceYutang Jiang2016-10-3192-5/+18046
| | | | | | | | | | | | | | | | | | | | | | | | The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* layerscape: add 64b/32b target for ls1043ardb deviceYutang Jiang2016-10-319-0/+832
| | | | | | | | | | | | | | | | | | Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* lantiq: added xrx200 as plattform for ltqvmmcStefan Koch2016-10-311-1/+1
| | | | Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
* lantiq: added xrx200 as plattform for ltqtapiStefan Koch2016-10-311-1/+1
| | | | Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
* lantiq: fix vmmc buildStefan Koch2016-10-312-5/+18
| | | | | | | | | | | | | (required not-distributable firmware blob - dump it by yourself from original firmware) Signed-off-by: Eddi De Pieri <eddi@depieri.net> (cherry picked from commit 47b1ff965b0cb57013b40fbe2bcd7f3c6eb6b606) Modified after cherry-pick: FW_MD5SUM in Makefile Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
* lantiq: ltq-vmmc add support for ar9-vr9Stefan Koch2016-10-311-0/+247
| | | | | | | | | (required not-distributable firmware blob - dump it by yourself from original firmware) Signed-off-by: Eddi De Pieri <eddi@depieri.net> (cherry picked from commit ea9e61b8eb61a2e362a50541f03466dc7d087947) Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
* fstools: update to latest git HEADJohn Crispin2016-10-311-3/+3
| | | | | | adds f2fs support Signed-off-by: John Crispin <john@phrozen.org>
* base-files: sysfixtime: Keep RTC time in UTC timezonePetr Štetiar2016-10-311-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to tell hwclock with -u commandline option, that we would like to keep our RTC clock in UTC timezone. Linux kernel expects RTC in UTC timezone anyway. In current state of things, we don't tell hwclock to load/store time from/to RTC in UTC timezone so it uses the timezone from the system time. If it's set to different timezone then UTC, sysfixtime is going to screw the time in RTC. I've following in the setup script: uci set system.@system[0].timezone='CET-1CEST,M3.5.0,M10.5.0/3' uci set system.@system[0].zonename='Europe/Prague' I've this RTC setup (rtc1 is RTC on i.MX6 SoC, rtc0 is battery backed RTC mcp7941x): rtc-ds1307 3-006f: rtc core: registered mcp7941x as rtc0 snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1 Then we can experience following (current time is 10:15am): $ date Fri Oct 21 10:15:07 CEST 2016 $ hwclock -r -f /dev/rtc0 Fri Oct 21 08:14:46 2016 0.000000 seconds $ hwclock -u -r -f /dev/rtc0 Fri Oct 21 10:14:46 2016 0.000000 seconds And after current broken sysfixtime: $ /etc/init.d/sysfixtime stop $ date Fri Oct 21 10:15:25 CEST 2016 $ hwclock -r -f /dev/rtc0 Fri Oct 21 10:15:31 2016 0.000000 seconds Now we've time in our battery backed RTC in CEST timezone instead of UTC. Then once again, but with this patch applied to sysfixtime, where hwclock is using correctly the -u parameter: $ /etc/init.d/sysfixtime stop $ date Fri Oct 21 10:15:53 CEST 2016 $ hwclock -r -f /dev/rtc0 Fri Oct 21 08:15:55 2016 0.000000 seconds Signed-off-by: Petr Štetiar <ynezz@true.cz> Acked-by: Jo-Philipp Wich <jo@mein.io>
* hostapd: properly package wpa-supplicant-meshAlexis Green2016-10-311-1/+2
| | | | | | | | | Ensure that selecting the wpa-supplicant-mesh package actually packages the wpa_supplicant binary with SAE support and add missing dependency on OpenSSL. Signed-off-by: Alexis Green <alexis@cessp.it> [Jo-Philipp Wich: slightly reword commit message for clarity] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* hostapd support for VLANs through a file in addition to Radius.Petr Konecny2016-10-311-18/+25
| | | | Signed-off-by: Petr Konecny <pekon@google.com>
* uhttpd: Add Basic Auth configDaniel Dickinson2016-10-312-1/+38
| | | | | | | | | | | | | | | | | We add an 'httpauth' section type that contains the options: prefix: What virtual or real URL is being protected username: The username for the Basic Auth dialogue password: Hashed (crypt()) or plaintext password for the Basic Auth dialogue httpauth section names are given included as list items to the instances to which they are to be applied. Further any existing httpd.conf file (really whatever is configured in the instance, but default of /etc/httpd.conf) is appended to the per-instance httpd.conf Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
* lldpd: freeze execution of lldpd during reloadAlexandru Ardelean2016-10-311-1/+5
| | | | | | | | | | During reload, we could send invalid information to the other side and confuse it. That's why, during reload we'll pause execution, do the reconfig and resume + update when reload is done. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* lldpd: fix reload function for when interfaces changeAlexandru Ardelean2016-10-312-20/+44
| | | | | | | | | | | | | | | | The problem is that interfaces are specified at start as command line arguments, making them unchange-able via reload. That means, we have to move (since lldpd allows this) the interfaces-match-pattern option to be in a config file and reload the configuration. It's either that, or do a 'restart'. Since we're generating the lldpd.conf file, we'll have to move the 'sysconfdir' of lldpd to /tmp, where the files will get written ; this will prevent any unncessary flash writes. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* ath10k-firmware: update qca9984 firmwarePavel Kubelun2016-10-311-2/+3
| | | | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> [Jo-Philipp Wich: add mirror sha256 sum] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* openvpn: cacert does not existJohn Crispin2016-10-271-2/+2
| | | | | | cacert is really called ca and already in the script Signed-off-by: John Crispin <john@phrozen.org>
* linux/modules: drop ledtrig-netfilterJohn Crispin2016-10-271-21/+0
| | | | | | this is a duplicate of kmod-ipt-led Signed-off-by: John Crispin <john@phrozen.org>
* openvpn: add handling for capath and cafileJohn Crispin2016-10-271-1/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* package/network/utils/ipset: Update to 6.30Daniel Engberg2016-10-271-2/+2
| | | | | | Updates to 6.30 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* util-linux: disc -> Disc and moved some packagesAlberto Bursi2016-10-271-11/+11
| | | | | | | | | Capitalized "disc" submenu name as all submenu names are capitalized (apart from "database", but I'll fix that later). moved "swap-utils" to Filesystem submenu as it is "formatting" a partition as swap so it looks out of place in Disc. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* ath10k-ct: Add QCA9888/9886 support, fix compat issue.Ben Greear2016-10-271-2/+2
| | | | | | | This should fix problems with latest backports, and also adds driver support for QCA9888 chipset. Signed-off-by: Ben Greear <greearb@candelatech.com>
* base-files: Ensure reset only works if an overlay existsChris Blake2016-10-271-1/+5
| | | | | | | | | | | | | | Currently the reset script will try to run jffs2reset on boards that are running a rw rootfs, such as ext4. This will cause jffs2reset to fail and the board to never reboot while the LED blinks until a manual reboot. This commit does two different things: 1. Disables reset on boards that do not have an overlay mount 2. Disables the Blinking LED after 5 seconds if the board does not support reset Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* netifd: update to latest git HEADJohn Crispin2016-10-271-3/+3
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* uboot-kirkwood: fix default bootcmd for Seagate DockstarPaul Wassi2016-10-271-1/+1
| | | | | | | Fix the default value for the 'bootcmd' environment variable. Therefore make the default bootcmd work for buildbot's images. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 00:45:02 +0000