aboutsummaryrefslogtreecommitdiffstats
path: root/package/utils
Commit message (Collapse)AuthorAgeFilesLines
* mediatek: add support for ZyXEL NWA50AX ProDavid Bauer2023-07-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Mediatek MT7981 RAM: 512M DDR4 FLASH: 256M NAND ETH: MaxLinear GPY211 (2.5GbE N Base-T) WiFi: Mediatek MT7981 (2.4GHz 2T2R:2 5GHz 3T3R:2 802.11ax) BTN: 1x Reset LED: 1x Multi-Color UART Console ------------ Available below the rubber cover next to the ethernet port. Settings: 115200 8N1 Layout: <12V> <LAN> GND-RX-TX-VCC Logic-Level is 3V3. Don't connect VCC to your UART adapter! Installation Web-UI ------------------- Upload the Factory image using the devices Web-Interface. As the device uses a dual-image partition layout, OpenWrt can only installed on Slot A. This requires the current active image prior flashing the device to be on Slot B. In case this is not the case, OpenWrt will boot only one time, returning to the ZyXEL firmware the second boot. If this happens, first install a ZyXEL firmware upgrade of any version and install OpenWrt after that. Installation TFTP / Recovery ---------------------------- This installation routine is especially useful in case of a bricked device. Attach to the UART console header of the device. Interrupt the boot procedure by pressing Enter. The bootloader has a reduced command-set available from CLI, but more commands can be executed by abusing the atns command. Boot a OpenWrt initramfs image available on a TFTP server at 192.168.1.66. Rename the image to nwa50axpro-openwrt-initramfs.bin. $ atnf nwa50axpro-openwrt-initramfs.bin $ atna 192.168.1.88 $ atns "192.168.1.66; tftpboot; setenv fdt_high 0xffffffffffffffff; bootm" Upon booting, set the booted image to the correct slot: $ zyxel-bootconfig /dev/mtd9 get-status $ zyxel-bootconfig /dev/mtd9 set-image-status 0 valid $ zyxel-bootconfig /dev/mtd9 set-active-image 0 Copy the OpenWrt sysupgrade image to the device using scp. Write the sysupgrade image to NAND using sysupgrade. $ sysupgrade -n image.bin Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit f0445746f6fd96fc7c5394b238153bd2ff22bc5b)
* busybox: update to 1.36.1Nick Hainke2023-05-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Release Notes: http://lists.busybox.net/pipermail/busybox-cvs/2023-May/041510.html Refresh commands, run after busybox is first built once (nothing changed compared to 1.36.0): cd package/utils/busybox/config/ ../convert_menuconfig.pl ../../../../build_dir/target-mipsel_24kc_musl/busybox-default/busybox-1.36.1 cd .. ./convert_defaults.pl ../../../build_dir/target-mipsel_24kc_musl/busybox-default/busybox-1.36.1/.config > Config-defaults.in Manual edits needed afterward: * Config-defaults.in: OpenWrt config symbol IPV6 logic applied to BUSYBOX_DEFAULT_FEATURE_IPV6 * Config-defaults.in: OpenWrt config TARGET_bcm53xx logic applied to BUSYBOX_DEFAULT_TRUNCATE (commit 547f1ec) * Config-defaults.in: OpenWrt logic applied to BUSYBOX_DEFAULT_LOGIN_SESSION_AS_CHILD (commit dc92917) * Config-defaults.in: correct the default ports that get reset BUSYBOX_DEFAULT_FEATURE_HTTPD_PORT_DEFAULT 80 BUSYBOX_DEFAULT_FEATURE_TELNETD_PORT_DEFAULT 23 * config/editors/Config.in: Add USE_GLIBC dependency to BUSYBOX_CONFIG_FEATURE_VI_REGEX_SEARCH (commit f141090) * config/shell/Config.in: change at "Options common to all shells" the conditional symbol SHELL_ASH --> BUSYBOX_CONFIG_SHELL_ASH (discussion in http://lists.openwrt.org/pipermail/openwrt-devel/2021-January/033140.html Apparently our script does not see the hidden option while prepending config options with "BUSYBOX_CONFIG_" which leads to a missed dependency when the options are later evaluated.) * Edit a few Config.in files by adding quotes to sourced items in config/Config.in, config/networking/Config.in and config/util-linux/Config.in (commit 1da014f) Tested-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 3b76f6eee430a107a0970583c1aa215b35f7e3e4) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* util-linux: Use SYS_getrandom in randutils.cHauke Mehrtens2023-05-192-15/+1
| | | | | | | | | | | The getrandom syscall is not hanging at bootup any more if there is not enough entropy. This was fixed upstream in 2018 in commit: https://github.com/util-linux/util-linux/commit/a9cf659e0508c1f56813a7d74c64f67bbc962538 This OpenWrt patch is not needed any more. This reverts commit e64463ebde55 ("util-linux: avoid using the getrandom syscall") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* util-linux: Fix taskset conflict with busyboxHauke Mehrtens2023-05-191-1/+2
| | | | | | | | | | This fixes the following error: * check_data_file_clashes: Package taskset wants to install file build_dir/target-powerpc_8548_musl/root-mpc85xx/usr/bin/taskset But that file is already provided by package * busybox * opkg_install_cmd: Cannot install package taskset. Fixes: 3c3d797c4dad ("busybox: enable taskset by default") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* f2fs-tools: update to 1.16.0Nick Hainke2023-05-193-172/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove upstramed patches: - 100-configure.ac-fix-AC_ARG_WITH.patch - 101-configure.ac-fix-cross-compilation.patch Remove deprecated f2fstat tool: https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=77bf7ed29f1dd1341079913f3b36fc62f812c4f5 Changelog: 06c027a f2fs-tools: upgrade version 1.16.0 542cc57 fsck.f2fs: fix sanity check logic for cp_payload a7df89e mkfs.f2fs: remove indentation c82985a fsck.f2fs: don't call report_zone on normal partition 0ac168e f2fs-tools: relax zone size of power of 2 641be32 mkfs.f2fs: trim all the devices except the first one 3835fef f2fs-tools: fix # of total segments 5b08ca9 f2fs_io: support AES_256_HCTR2 ae3301c f2fs_io: Fix out of tree builds ddbde27 fsck.f2fs: relocate chksum verification step during f2fs_do_mount() 77bf7ed f2fs-tools: Remove deprecated f2fstat fb6575e Remove sg_write_buffer 1bb669e fsck.f2fs: avoid uncessary recalculation ccd2361 fsck.f2fs: fix potential overflow of copying i_name cd6b133 fsck.f2fs: add parentheses for SB_MASK 399600a dump.f2fs: remove unavailable option -g 3e6e178 f2fs-tools: define HAVE_CLOCK_GETTIME properly 907b972 f2fs-tools: support F2FS_IOC_START_ATOMIC_REPLACE 9ff70fb f2fs-tools: give less overprovisioning space 844f821 f2fs-tools: set host-aware zoned device similar to host-managed one 88ac76d fsck.f2fs: fix missing to assign c.zoned_model 8cbe34e fsck.f2fs: trigger repairing if filesystem has inconsistent errors 2f1dde2 fsck.f2fs: trigger repairing if filesystem was forced to stop 465159f fsck.f2fs: export valid image size 3486b62 mkfs.f2fs: update allocation policy for ro feature bdd51e5 fsck.f2fs: fix __end_block_addr() 5a5e419 Always use sparse/sparse.h when building for Android 19f77c6 f2fs-tools: fix build error on lz4-1.9.4 986c1f1 Fix format strings in log messages 0d6acbe fsck.f2fs: use elapsed_time in checkpoint for period check 9b7a4c5 mkfs.f2fs: catch total_zones=0 instead of crashing 6148db3 f2fs-tools: use F2FS_BLKSIZE instead of PAGE_*_SIZE f09c2b7 f2fs_io: support triggering filesystem GC via ioctl 32e7d27 configure.ac: fix cross compilation 65fe94e configure.ac: fix AC_ARG_WITH 6325cf7 Use F2FS_BLKSIZE as the size of struct f2fs_summary_block c89be7a Use F2FS_BLKSIZE for dev_read_block() buffers 5317d18 Improve compile-time type checking for f2fs_report_zone() 92e2e52 Fix f2fs_report_zone() 648a491 Fix the struct f2fs_dentry_block definition c964547 resize.f2fs: add option to manually specify new overprovision a741438 fsck.f2fs: drop compression bit if inline_data is set 406b1c9 f2fs-tools: fix cannot get bdev information 9d0cb9e f2fs_io: add dsync option for write a7b8b46 tools: fix file too large causing overflow bddca6f dump.f2fs: add -I nid to dump inode by scan full disk ebc3879 android_config: add time headers c1144bf Check fallthrough in mount.h for Mac bcb9929 avoid unnecessary function 7d902f4 Fix dependencies on linux/blkzoned.h when using Bionic. 274abbb Remove unnecessary config.h 8c97ab3 libzone: remove duplicate header adcec10 Support zoned device if libc exists efc2bc7 mkfs.f2fs: fix typo 3034a41 mkfs.f2fs: split unused parameter dd8d8e5 f2fs-tools: do not use SG_IO in Android 4f216e6 f2fs-tools: move android_config before defining them 48c5dbb f2fscrypt: adjust config file first 4b55459 android_config: add missing uuid library Signed-off-by: Nick Hainke <vincent@systemli.org>
* util-linux: Fix build on powerpc and arcHauke Mehrtens2023-05-191-3/+15
| | | | | | | | | This fixes the build of util-linux on powerpc and arc. Both CPU architectures were not supported here in addition to the missing MIPS support. Fixes: 628a410ed149 ("util-linux: update to 2.39") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* util-linux: update to 2.39Thomas Weißschuh2023-05-1813-250/+29
| | | | | | | | | | | | | | | | | | | | | | | | Release Notes: https://cdn.kernel.org/pub/linux/utils/util-linux/v2.39/v2.39-ReleaseNotes Remove upstreamed: 030-meson-don-t-use-run.patch 040-meson-fix-cpu_set_t-test.patch 050-meson-fix-environ-search.patch 060-meson-add-_GNU_SOURCE-for-sighandler_t.patch 070-meson-fix-isnan-check.patch 080-meson-fix-tzname-check.patch 090-meson-libpam.patch 100-meson-make-libcap-ng-dependent-on-setpriv.patch 120-meson-get-the-project-version-from-the-version-gen-s.patch 130-meson-fix-error-in-processing-version-for-pc-files.patch New: 0001-test_enosys-add-support-for-mips.patch Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de> [Refresh patches] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ucode: update to the latest versionTianling Shen2023-05-181-3/+3
| | | | | | | | | 8f78aff2cb68 ubus: support multiple call return values 51f4dba67313 ucode: also link libresolv if ns_initparse() is not found 5c7d07773a59 uci: fix ctx.commit() without arguments 5163867269fc Merge pull request #148 from jow-/uci-fix-commit Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* px5g-wolfssl: replace COMMITCOUNT with real PKG_RELEASETianling Shen2023-05-181-1/+1
| | | | | | Similar to the AUTORELEASE conversion process. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* treewide: replace AUTORELEASE with real PKG_RELEASETianling Shen2023-05-183-3/+3
| | | | | | | | | | | | | | | | | | Based on Paul Fertser <fercerpav@gmail.com>'s guidance: Change AUTORELEASE in rules.mk to: ``` AUTORELEASE = $(if $(DUMP),0,$(shell sed -i "s/\$$(AUTORELEASE)/$(call commitcount,1)/" $(CURDIR)/Makefile)) ``` then update all affected packages by: ``` for i in $(git grep -l PKG_RELEASE:=.*AUTORELEASE | sed 's^.*/\([^/]*\)/Makefile^\1^';); do make package/$i/clean done ``` Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* secilc: update to 3.5Linhui Liu2023-05-181-2/+2
| | | | | | | | Release Notes: https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* policycoreutils: update to 3.5Linhui Liu2023-05-181-2/+2
| | | | | | | | Release Notes: https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* checkpolicy: update to 3.5Linhui Liu2023-05-181-2/+2
| | | | | | | | Release Notes: https://github.com/SELinuxProject/selinux/releases/download/3.4/RELEASE-3.4.txt https://github.com/SELinuxProject/selinux/releases/download/3.5/RELEASE-3.5.txt Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* mdadm: fix compilation with musl 1.2.4Nick Hainke2023-05-161-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | _LARGEFILE64_SOURCE has to be defined in the source, or CFLAGS can be used to pass -D_LARGEFILE64_SOURCE to allow to keep using LFS64 definitions. Fixes error in the form of: restripe.c: In function 'restore_stripes': restripe.c:758:43: error: 'off64_t' undeclared (first use in this function); did you mean 'off_t'? 758 | (off64_t)read_offset) { | ^~~~~~~ | off_t restripe.c:758:43: note: each undeclared identifier is reported only once for each function it appears in restripe.c:758:51: error: expected ')' before 'read_offset' 758 | (off64_t)read_offset) { | ^~~~~~~~~~~ | ) restripe.c:757:36: note: to match this '(' 757 | if (lseek64(source, read_offset, 0) != | ^ make[3]: *** [Makefile:193: restripe.o] Error 1 Fixes: fff878c5bcda ("toolchain/musl: update to 1.2.4") Signed-off-by: Nick Hainke <vincent@systemli.org>
* e2fsprogs: fix compilation with musl 1.2.4Tianling Shen2023-05-161-1/+5
| | | | | | | | | musl 1.2.4 deprecated legacy "LFS64" ("large file support") interfaces and autotools failed to check the lseek64 function. Force enable ac_cv_func_lseek64 to workaround it. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* f2fs-tools: fix compilation with musl 1.2.4Tianling Shen2023-05-161-1/+5
| | | | | | | | | musl 1.2.4 deprecated legacy "LFS64" ("large file support") interfaces and autotools failed to check the lseek64 function. Force enable ac_cv_func_lseek64 to workaround it. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* busybox: turn on BUSYBOX_DEFAULT_ASH_RANDOM_SUPPORT for having $RANDOMIlario Gelmetti2023-04-251-1/+1
| | | | | | $RANDOM shell variable is a convenient way for getting a random number from 0 to 32767 Signed-off-by: Ilario Gelmetti <iochesonome@gmail.com>
* busybox: Activate resize tool by defaultHauke Mehrtens2023-04-251-1/+1
| | | | | | | | | | | The resize tool will resize the prompt to match the current terminal size. This is helpful when connecting to the system using UART to make the vi or top output match the current terminal size. This increases the busybox binary size by 136 bytes and the ipkg size by 335 bytes on aarch64. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* yafut: add a kernel update tool for MikroTik NANDMichał Kępień2023-04-181-0/+35
| | | | | | | | | | | | | | | | | | | | | | Commit 9d96b6fb72 ("ath79/mikrotik: disable building NAND images") disabled building images for MikroTik devices with NAND flash due to a less than satisfactory method used for updating the kernel on those devices back then. To address the problem, add support for updating the kernel on MikroTik devices with NAND flash using a new tool, Yafut, which enables copying files from/to Yaffs file systems even if the kernel does not have native support for the Yaffs file system compiled in. Instead of erasing the entire NAND partition holding the kernel during every system upgrade (which is what the previously-used approach employing kernel2minor involved), Yafut preserves the Yaffs filesystem present on that partition and only replaces the kernel executable. This allows bad block information to be preserved across sysupgrade runs and also enables wear leveling on the NAND partition holding the kernel. Yafut does not rely on kernel2minor in any way and intends to eventually supersede the latter for NAND devices. Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
* busybox: enable taskset by defaultFelix Fietkau2023-04-011-3/+3
| | | | | | This is useful for controlling process affinity on SMP systems Signed-off-by: Felix Fietkau <nbd@nbd.name>
* util-linux: add rev utility packageOskari Rauta2023-03-251-1/+18
| | | | | | | | | | | | I found use for this in my scripts; I noticed that it is already compiled with util-linux - there just isn't package for it - let's package it then. Description: The rev utility copies the specified files to the standard output, reversing the order of characters in everyline. Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
* treewide: add support for "lto" in PKG_BUILD_FLAGSAndre Heider2023-03-212-7/+3
| | | | | | | | | | | | | | | | This reduces open coding and allows to easily add a knob to enable it treewide, where chosen packages can still opt-out via "no-lto". Some packages used LTO, but not the linker plugin. This unifies 'em all to attempt to produce better code. Quoting man gcc(1): "This improves the quality of optimization by exposing more code to the link-time optimizer." Also use -flto=auto instead of -flto=jobserver, as it's not guaranteed that every buildsystem uses +$(MAKE) correctly. Signed-off-by: Andre Heider <a.heider@gmail.com>
* treewide: add support for "gc-sections" in PKG_BUILD_FLAGSAndre Heider2023-03-213-8/+4
| | | | | | | | | | | | | | | This reduces open coding and allows to easily add a knob to enable it treewide, where chosen packages can still opt-out via "no-gc-sections". Note: libnl, mbedtls and opkg only used the CFLAGS part without the LDFLAGS counterpart. That doesn't help at all if the goal is to produce smaller binaries. I consider that an accident, and this fixes it. Note: there are also packages using only the LDFLAGS part. I didn't touch those, as gc might have been disabled via CFLAGS intentionally. Signed-off-by: Andre Heider <a.heider@gmail.com>
* treewide: replace PKG_USE_MIPS16:=0 with PKG_BUILD_FLAGS:=no-mips16Andre Heider2023-03-212-2/+2
| | | | | | | Keep backwards compatibility via PKG_USE_MIPS16 for now, as this is used in all package feeds. Signed-off-by: Andre Heider <a.heider@gmail.com>
* uencrypt: split common and library-specific codeEneas U de Queiroz2023-03-176-294/+382
| | | | | | | | | | | | | | This splits the code in 4 files: - uencrypt.h - uencrypt.c - main program - uencrypt-openssl.c - OpenSSL/wolfSSL implementation - uencrypt-mbedtls - mbedTLS implementation Other changes, accounting for ~400 bytes increase in ipk size: - more error condition checking and reporting, - hide key and iv command line arguments Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* uencrypt: add support for mbedtlsEneas U de Queiroz2023-03-174-52/+309
| | | | | | | | | | | | | | This commit includes some additional changes: - better handling of iv and keys in openssl/wolfssl variants - fix compiler warnings and whitespace - build all 3 variants as separate packages - adjust the new package name in targets' DEVICE_PACKAGES - remove PKG_FLAGS:=nonshared [Beeline SmartBox Flash - OK] Tested-by: Mikhail Zhilkin <csharper2005@gmail.com> [after test: replaced a hardcoded IV size of 16 by cipher_info->iv_size] Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* dtc: update to 1.7.0Nick Hainke2023-03-052-139/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changelog: 039a994 Bump version to v1.7.0 3f29d6d pylibfdt: add size_hint parameter for get_path 2022bb1 checks: Update #{size,address}-cells check for 'dma-ranges' abbd523 pylibfdt: Work-around SWIG limitations with flexible arrays a41509b libfdt: Replace deprecated 0-length arrays with proper flexible arrays 2cd89f8 dtc: Warning rather than error on possible truncation of cell values 55778a0 libfdt: tests: add get_next_tag_invalid_prop_len 7359034 libfdt: prevent integer overflow in fdt_next_tag 035fb90 libfdt: add fdt_get_property_by_offset_w helper 98a0700 Makefile: fix infinite recursion by dropping non-existent `%.output` a036cc7 Makefile: limit make re-execution to avoid infinite spin c6e9210 libdtc: remove duplicate judgments e37c256 Don't generate erroneous fixups from reference to path 5045465 libfdt: Don't mask fdt_get_name() returned error e64a204 manual.txt: Follow README.md and remove Jon f508c83 Update README in MANIFEST.in and setup.py to README.md c2ccf8a Add description of Signed-off-by lines 90b9d9d Split out information for contributors to CONTRIBUTING.md 0ee1d47 Remove Jon Loeliger from maintainers list b33a73c Convert README to README.md 7ad6073 Allow static building with meson fd9b8c9 Allow static building with make fda71da libfdt: Handle failed get_name() on BEGIN_NODE c7c7f17 Fix test script to run also on dash shell 01f23ff Add missing relref_merge test to meson test list ed31080 pylibfdt: add FdtRo.get_path() c001fc0 pylibfdt: fix swig build in install 26c54f8 tests: add test cases for label-relative path references ec7986e dtc: introduce label relative path references 651410e util: introduce xstrndup helper 4048aed setup.py: fix out of tree build ff5afb9 Handle integer overflow in check_property_phandle_args() ca72944 README: Explain how to add a new API function c0c2e11 Fix a UB when fdt_get_string return null cd5f69c tests: setprop_inplace: use xstrdup instead of unchecked strdup a04f690 pylibfdt: add Property.as_*int*_array() 8310271 pylibfdt: add Property.as_stringlist() d152126 Fix Python crash on getprop deallocation 17739b7 Support 'r' format for printing raw bytes with fdtget 45f3d1a libfdt: overlay: make overlay_get_target() public c19a4ba libfdt: fix an incorrect integer promotion 1cc41b1 pylibfdt: Add packaging metadata db72398 README: Update pylibfdt install instructions 383e148 pylibfdt: fix with Python 3.10 23b56cb pylibfdt: Move setup.py to the top level 69a7607 pylibfdt: Split setup.py author name and email 0b106a7 pylibfdt: Use setuptools_scm for the version c691776 pylibfdt: Use setuptools instead of distutils 5216f3f libfdt: Add static lib to meson build 4eda259 CI: Cirrus: bump used FreeBSD from 12.1 to 13.0 0a3a9d3 checks: Add an interrupt-map check 8fd2474 checks: Ensure '#interrupt-cells' only exists in interrupt providers d8d1a9a checks: Drop interrupt provider '#address-cells' check 52a16fd checks: Make interrupt_provider check dependent on interrupts_extended_is_cell 37fd700 treesource: Maintain phandle label/path on output e33ce1d flattree: Use '\n', not ';' to separate asm pseudo-ops d24cc18 asm: Use assembler macros instead of cpp macros ff3a30c asm: Use .asciz and .ascii instead of .string 5eb5927 fdtdump: fix -Werror=int-to-pointer-cast 0869f82 libfdt: Add ALIGNMENT error string 69595a1 checks: Fix bus-range check 72d09e2 Makefile: add -Wsign-compare to warning options b587787 checks: Fix signedness comparisons warnings 69bed6c dtc: Wrap phandle validity check 9102211 fdtget: Fix signedness comparisons warnings d966f08 tests: Fix signedness comparisons warnings ecfb438 dtc: Fix signedness comparisons warnings: pointer diff 5bec74a dtc: Fix signedness comparisons warnings: reservednum 24e7f51 fdtdump: Fix signedness comparisons warnings Remove upstreamed: - 0001-Support-r-format-for-printing-raw-bytes-with-fdtget.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* fritz-tools: fix segfault in caldata-extractDavid Bauer2023-03-022-4/+6
| | | | | | | * Fix incorrect error message in case input file opening fails * Don't close files in case the pointers are invalid Signed-off-by: David Bauer <mail@david-bauer.net>
* ucode: update to the latest versionFelix Fietkau2023-02-141-4/+4
| | | | | | | | | | | | | | 08c709c58187 rtnl: add support for registering an uloop based listener 599a7fb59380 Merge pull request #140 from nbd168/rtnl c4125c516e0a nl80211: fix NL80211_ATTR_SURVEY_INFO c43bb9d8fe8d Merge pull request #141 from dhewg/master c1342d934b2d nl80211: add missing ucv_get() calls 9022b270683a rtnl: add missing ucv_get() calls 837cffec5a5c Merge pull request #142 from nbd168/ref-fixes 65b1f181e642 rtnl: add missing uc_vm_registry_set call ab2f3f70257d Merge pull request #143 from nbd168/rtnl-fix Signed-off-by: Felix Fietkau <nbd@nbd.name>
* e2fsprogs: update to 1.47.0Nick Hainke2023-02-131-2/+2
| | | | | | | Release notes: https://e2fsprogs.sourceforge.net/e2fsprogs-release.html#1.47.0 Signed-off-by: Nick Hainke <vincent@systemli.org>
* e2fsprogs: update to 1.46.6Nick Hainke2023-02-082-53/+3
| | | | | | | | | | Release information: https://e2fsprogs.sourceforge.net/e2fsprogs-release.html#1.46.6 Remove upstreamed patch: - 004-CVE-2022-1304-libext2fs-add-sanity-check-to-extent-manipulation.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* ucode: update to the latest versionFelix Fietkau2023-01-291-4/+4
| | | | | | | | | | | 1c8df08824ef style: add .editorconfig file ec167d39b803 nl80211: refactor command bitmask handling 6704ec0d5b29 nl80211: add support for registering an uloop based listener 48a6eac1da15 fs: implement `fs.pipe()` f1be0d725735 types: fix array unshift operations and add test coverage 941d14837faf Merge pull request #138 from nbd168/nl80211 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ucode: move to the lang submenuAndre Heider2023-01-281-5/+9
| | | | | | | Just as lua or the various languages from the package feed. libucode is the exception, so move it to the libs menu instead. Signed-off-by: Andre Heider <a.heider@gmail.com>
* px5g-mbedtls: Use getrandom()Hauke Mehrtens2023-01-281-4/+8
| | | | | | | | | | | | | | | | Instead of accessing /dev/urandom use the getrandom syscall. This way we do not have to keep the file open all the time. This also fixes a compile error with glibc: -------- px5g-mbedtls.c: In function '_urandom': px5g-mbedtls.c:48:9: error: ignoring return value of 'read' declared with attribute 'warn_unused_result' [-Werror=unused-result] 48 | read(urandom_fd, out, len); | ^~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors -------- Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ucode: update to latest Git HEADBrian Norris2023-01-211-3/+3
| | | | | | | | | | | | | To bring in isatty() support. Includes new commits: be30472bfdbb fs: add `isatty()` function 0a58d510529e nl80211: add support for NL80211_ATTR_MPATH_INFO Signed-off-by: Brian Norris <computersforpeace@gmail.com> [ remove additional merge commit ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ucode-mod-bpf: add new package for a ucode libbpf bindingFelix Fietkau2023-01-092-0/+854
| | | | | | | | | | The bpf plugin provides functionality for loading and interacting with eBPF modules. It allows loading full modules and pinned maps/programs and supports interacting with maps and attaching programs as tc classifiers. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ucode: update to the latest versionFelix Fietkau2023-01-091-3/+3
| | | | | | | | | 34cfbb922c96 README.md: various spelling and documentation fixes ff32355ea645 build: make rtnl/nl80211 depend on linux instead of !APPLE c0e413c21f7b include: add uc_fn_thisval() 1e4d20932646 Merge pull request #134 from nbd168/thisval Signed-off-by: Felix Fietkau <nbd@nbd.name>
* busybox: update to 1.36.0Hannu Nyman2023-01-078-54/+120
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update busybox to version 1.36.0 * refresh patches (remove the backported upstream fix) * refresh config Config refresh: Refresh commands, run after busybox is first built once: cd package/utils/busybox/config/ ../convert_menuconfig.pl ../../../../build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/busybox-default/busybox-1.36.0 cd .. ./convert_defaults.pl ../../../build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/busybox-default/busybox-1.36.0/.config > Config-defaults.in Manual edits needed after config refresh: * Config-defaults.in: OpenWrt config symbol IPV6 logic applied to BUSYBOX_DEFAULT_FEATURE_IPV6 * Config-defaults.in: OpenWrt config TARGET_bcm53xx logic applied to BUSYBOX_DEFAULT_TRUNCATE (commit 547f1ec) * Config-defaults.in: OpenWrt logic applied to BUSYBOX_DEFAULT_LOGIN_SESSION_AS_CHILD (commit dc92917) * Config-defaults.in: correct the default ports that get reset BUSYBOX_DEFAULT_FEATURE_HTTPD_PORT_DEFAULT 80 BUSYBOX_DEFAULT_FEATURE_TELNETD_PORT_DEFAULT 23 * config/editors/Config.in: Add USE_GLIBC dependency to BUSYBOX_CONFIG_FEATURE_VI_REGEX_SEARCH (commit f141090) * config/shell/Config.in: change at "Options common to all shells" the conditional symbol SHELL_ASH --> BUSYBOX_CONFIG_SHELL_ASH (discussion in http://lists.openwrt.org/pipermail/openwrt-devel/2021-January/033140.html Apparently our script does not see the hidden option while prepending config options with "BUSYBOX_CONFIG_" which leads to a missed dependency when the options are later evaluated.) * Edit a few Config.in files by adding quotes to sourced items in config/Config.in, config/networking/Config.in and config/util-linux/Config.in (commit 1da014f) Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* util-linux: update to 2.38.1Linhui Liu2023-01-074-66/+3
| | | | | | | | | | | | Release Notes: https://cdn.kernel.org/pub/linux/utils/util-linux/v2.38/v2.38.1-ReleaseNotes Remove upstreamed: - 010-meson-typo.patch - 020-meson-fix-compilation-without-systemd.patch - 110-meson-fix-when-HAVE_CLOCK_GETTIME-is-set.patch Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
* zyxel-bootconfig: clean up scriptDavid Bauer2023-01-071-3/+1
| | | | | | Drop unused variable and fix identation. Signed-off-by: David Bauer <mail@david-bauer.net>
* treewide: Trigger reinstall of all wolfssl dependenciesHauke Mehrtens2023-01-012-2/+2
| | | | | | | | The ABI of the wolfssl library changed a bit between version 5.5.3 and 5.5.4. This release update will trigger a rebuild of all packages which are using wolfssl to make sure they are adapted to the new ABI. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tree-wide: Do not use package librt and libpthreadHauke Mehrtens2022-12-292-2/+1
| | | | | | | | | | | The libraries libpthread, libdl, libutil, libanl have been integrated into the libc library in version 2.34. it is not needed to explicitly link them any more. Most of the functions have been moved from the librt.so into libc.so some time ago already. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* fritz-tools: fritz_tffs_nand: cache already read sector idsAndre Heider2022-12-071-1/+17
| | | | | | | This speeds up the tool significantly, especially when using the "-a" argument. Signed-off-by: Andre Heider <a.heider@gmail.com>
* fritz-tools: fritz_tffs_nand: get rid of struct tffs_sectorsAndre Heider2022-12-071-12/+8
| | | | | | This doesn't help and "[0]" gets in the way of bounds checks. Signed-off-by: Andre Heider <a.heider@gmail.com>
* fritz-tools: fritz_tffs_nand: exclude oob code when disabledAndre Heider2022-12-071-6/+9
| | | | | | Skip unnecessary stuff if checking the oob data is disabled. Signed-off-by: Andre Heider <a.heider@gmail.com>
* e2fsprogs: Fix CVE-2022-1304Hauke Mehrtens2022-12-062-1/+51
| | | | | | | | | This fixes CVE-2022-1304: An out-of-bounds read/write vulnerability was found in e2fsprogs 1.46.5. This issue leads to a segmentation fault and possibly arbitrary code execution via a specially crafted filesystem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ucode: update to latest Git HEADJo-Philipp Wich2022-12-061-3/+3
| | | | | | | | | | | | | | | | | 46d93c9 tests: fixup testcases 4c654df types: adjust double printing format eac2add compiler: fix bytecode for logical assignments of properties 3903b18 fs: add `realpath()` function 8366102 math: add isnan() function eef83d3 tests: relax sleep() test 394e901 lib: uc_json(): accept trailing whitespace when parsing strings 1867c8b uloop: terminate parent uloop in task child processes d2cc003 uci: auto-load package in `ctx.foreach()` and `ctx.get_first()` 6c5ee53 compiler: ensure that arrow functions with block bodies return no value fdc9b6a compiler: fix `??=`, `||=` and `&&=` logical assignment semantics 88dcca7 add cmake to install requires for debian Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* busybox: awk: fix use after free (CVE-2022-30065)Hauke Mehrtens2022-11-051-0/+42
| | | | | | | | | | | This backports a commit which fixes a use after free bug in awk. CVE-2022-30065 description: A use-after-free in Busybox 1.35-x's awk applet leads to denial of service and possibly code execution when processing a crafted awk pattern in the copyvar function. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mtd-utils: update to 2.1.5Nick Hainke2022-10-222-3/+3
| | | | | | | | | | Release Notes: https://lore.kernel.org/buildroot/c0992bbb-9487-9a51-ea9f-39cf074b61ec@sigma-star.at/ Refresh patches: - 130-lzma_jffs2.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* ucode: update to latest Git HEADJo-Philipp Wich2022-10-181-3/+3
| | | | | | | 00af065 fs: expose `getdelim()` functionality through `fd.read()` 21ace5e lexer: fixes for regex literal parsing Signed-off-by: Jo-Philipp Wich <jo@mein.io>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 08:37:17 +0000