aboutsummaryrefslogtreecommitdiffstats
path: root/package/system
Commit message (Collapse)AuthorAgeFilesLines
* mtd: imagetag: fix compilation with changed mtd_fixtrx callRafał Miłecki2016-05-111-1/+4
| | | | | | Function mtd_fixtrx was changed during trx improvements. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* ubox: make logging code honour the hostname properlyJohn Crispin2016-05-101-2/+4
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ubox: turn logd into a separate packageblogic2016-05-101-3/+17
| | | | | | | | | Currently system log is always included as a part of ubox. Add logd as a seperate package and add it to default packages list. Signed-off-by: Andrej Vlasic <andrej.vlasic@sartura.hr> SVN-Revision: 49285
* mtd: add -c option for specifying amount of data to be used for checksumRafał Miłecki2016-05-093-12/+31
| | | | | | | | | | | | | | | So far fixtrx was calculating checksum over amount of data matching partition erase size. It was mostly a workaround of checksum problem after changing anything in initial TRX content (e.g. formatting JFFS2). Its main purpose was to make bootloader accept modified TRX. This didn't provide much protection of flash data against corruption. This new option lets caller request calculating checksum over a bigger amount of data. It may be used e.g. to include whole kernel data for checksum and hopefully make bootloader go info failsafe mode if something goes wrong. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: trx: use separated buffer for TRX headerRafał Miłecki2016-05-091-5/+18
| | | | | | | | We plan to adjust usage of the main buffer to allow reading custom amount of data for CRC32. This means we need another buffer that will be always block aligned. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: seama: exit with error if Seama header wasn't foundrmilecki2016-05-091-1/+1
| | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: seama: fix image data handlingrmilecki2016-05-091-28/+18
| | | | | | | | | | | | 1) Put sanity checks in one place 2) Respect provided offset 3) Read only as much data as needed for MD5 calculation Thanks to the last change this is a great speedup and memory saver. On devices with NAND flash we were allocating & reading about 128 MiB while something about 8 MiB is enough. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: seama: move buf allocation to the MD5 functionrmilecki2016-05-091-16/+22
| | | | | | This buf is only used in this function now, so lets move it there. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: seama: update MD5 using header in the first block bufferrmilecki2016-05-091-4/+3
| | | | | | | This will allow separating first block buffer from a buffer used for MD5 calculation. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: seama: add md5 to header structrmilecki2016-05-092-12/+11
| | | | | | | This allows us to drop some extra offset calculations and simplifies code a bit. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: check for Seama magic early when fixing MD5rmilecki2016-05-091-7/+21
| | | | | | | This avoid long (and unneeded) process of reading all data in case of running on MTD not containig Seama entity. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: add missing breaks in a switchrmilecki2016-05-091-0/+2
| | | | | | | On platforms supporting both: TRX and Seama calling "fixtrx" was resulting in trying to fix Seama as well. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: use tabs for indentsrmilecki2016-05-091-7/+7
| | | | | | This makes code style consistent across the whole file. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* signing: remove unatteded build key and use current keyring insteadJo-Philipp Wich2016-04-301-4/+3
| | | | | | | | Remove the public unatteded buildkey from the opkg package to avoid having hardcoded keys in tree. Use the external keyring package instead which can be easily updated by users. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* fstools: fix snapshot supportJohn Crispin2016-04-291-4/+4
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* fstools: update to latest git HEADJohn Crispin2016-04-291-2/+2
| | | | | | fixes snapshot support Signed-off-by: John Crispin <john@phrozen.org>
* fstools: update to latest git HEADJohn Crispin2016-04-291-2/+2
| | | | | | this adds the remount command to the block tool Signed-off-by: John Crispin <john@phrozen.org>
* lede-keyring: add the developer public keyringJohn Crispin2016-04-291-0/+40
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* opkg: fix use-after-free with duplicate packages on the command lineJo-Philipp Wich2016-04-232-1/+13
| | | | | | | | | When the same package file is specified multiple times on the opkg install command line, the name pointer on the argv array becomes stale after the package structures have been merged, leading to invalid memory accesses upon install. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* package: flag essential components as nonsharedJo-Philipp Wich2016-04-062-0/+3
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uci: commit through symlinksJo-Philipp Wich2016-03-311-2/+3
| | | | | | | Update to latest HEAD in order to not clobber symlinks in /etc/config on uci commit. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* fstools: respect mount flags for /overlay mountsJo-Philipp Wich2016-04-251-2/+2
| | | | | | | | | Respect user configured mount flags such as "ro" or "sync" when processing external overlay mount points. Signed-off-by: Jo-Philipp Wich <jo@mein.io> SVN-Revision: 49223
* rpcd: update to latest versionLuka Perkov2016-04-131-3/+3
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 49162
* procd: fix respawn related warningJohn Crispin2016-03-101-0/+1
| | | | | | | | WARNING: Variable 'respawn' does not exist or is not an array/object Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 48996
* procd: support pidfile writing.John Crispin2016-03-101-1/+2
| | | | | | | | | | | | procd from revision b12bb150ed38a4409bef5127c77b060ee616b860 supports writing a pidfile. This adds support for setting that parameter with standard init script hooks: procd_set_param pidfile /var/run/someprocess.pid Signed-off-by: Karl Palsson <karlp@etactica.com> SVN-Revision: 48984
* procd: bump to latest git HEADJohn Crispin2016-03-101-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 48981
* ubox: update to the latest version, fixes an error on processing invalid modulesFelix Fietkau2016-03-071-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48952
* opkg: Fix handling of sha256sums for conffilesJohn Crispin2016-03-042-1/+15
| | | | | | | | | MD5s are shorter than SHA256, so reading buffer has to be bigger to read the whole hash. Signed-off-by: Michal Hrusecky <michal.hrusecky@nic.cz> SVN-Revision: 48917
* procd: Allow to configure default respawn retry countJohn Crispin2016-03-041-0/+10
| | | | | | | | | | | | | | | | | | Extend /etc/config/system with a parameter to set the default respawn retry for procd launched services that have respawn enabled. config service option respawn_retry -1 All services that don't specify specific respawn parameters will get their defaults added by procd.sh. If respawn_retry is specified in /etc/config/system the default retry limit will be set to this value by procd. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> SVN-Revision: 48915
* mtd: fix reading of image magic bytes in smaller chunksJohn Crispin2016-03-031-5/+12
| | | | | | | | | | | | | | | The image_check currently fails when it cannot read all magic bytes in a single chunk. But this can happen when the data are read from a pipe. This currently breaks the openmesh.sh upgrade script with musl because it uses dd with a blocksize of 1 to copy the image file to the mtd process. The read can simply be repeated until enough bytes are read for the magic byte check. It only stops when either an error was returned or 0 bytes were read. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 48891
* opkg: Make opkg understand old md5John Crispin2016-03-012-21/+69
| | | | | | | | | | Opkg now uses sha256 by default and expects them. Making it optionally understand md5s also and detect md5 sum so we can migrate from configuration that used md5. Signed-off-by: Michal Hrusecky <Michal.Hrusecky@nic.cz> SVN-Revision: 48867
* procd: hotplug.json: allow passing hotplug events from all subsystemsJohn Crispin2016-02-261-12/+6
| | | | | | | | | | | There are time that programs need to be notified of events from subsystems that are not enumerated in the .json definition, e.g. QEMU guest agent by default requires /dev/virtio-ports/org.qemu.guest_agent.0 which is a symlink to /dev/vportMpN from virtio-ports subsystem. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 48799
* hotplug-preinit: remove superfluous `and`John Crispin2016-02-261-3/+1
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 48795
* mtd: fix Seama format after replacing EOF with sysupgrade dataRafał Miłecki2016-02-101-2/+13
| | | | | | | | | | Seama header has MD5 similarly to TRX and its CRC32. We need to update it after replacing anything in Seama entity content to make bootloader accept it. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48688
* ubox: fix kmodloader resource leaks (#21826)Jo-Philipp Wich2016-02-091-1/+1
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 48686
* ubox: fix open() error handling (#21826)Jo-Philipp Wich2016-02-091-2/+2
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 48683
* procd: honor CONFIG_TARGET_INIT_PATHJo-Philipp Wich2016-02-081-3/+10
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 48677
* udev: delete package, it is old and not used by any core packages/targetsFelix Fietkau2016-02-075-343/+0
| | | | | | | | udev or eudev will be added to the packages feed instead Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48644
* mtd: detect image format when writingRafał Miłecki2016-02-063-13/+60
| | | | | | | | | | | | | | | Recently TRX checking code was changed to detect Seama format and don't abort whole writing operation because of it. This isn't a good long-term solution. It's a poor idea to teach every format handler recognizing all possible formats. Instead it should be handled in a generic code which should run check depending on the detected format. This will also allow further improvements like fixing formats other than TRX after replacing JFFS2. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48639
* procd: update to the latest version, fixes a memory leak in trigger handlingFelix Fietkau2016-02-041-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48631
* uci: update to the latest version, fixes uci show output for anonymous ↵Felix Fietkau2016-02-021-2/+2
| | | | | | | | sections (#21781) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48617
* mtd: allow writing Seama files to "firmware" on Broadcom targetsRafał Miłecki2016-01-281-0/+6
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48534
* mtd: enable "fixseama" on bcm53xxRafał Miłecki2016-01-281-1/+1
| | | | | | | | There are D-Link bcm53xx devices using Seama format. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48521
* ubus: update to the latest version, fixes a memory leak on client disconnectFelix Fietkau2016-01-261-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48505
* usign: force installation to $(STAGING_DIR_HOST)Felix Fietkau2016-01-251-0/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48500
* opkg: depend on uclient-fetch, disable busybox wgetFelix Fietkau2016-01-191-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48386
* procd: emit events for sound subsystemJohn Crispin2016-01-191-1/+1
| | | | | | | | | | | | | | | | | | | | Useful e.g. for plugable USB-soundcards. With this change an event/hotplug-call looks like: ACTION: add DEVNAME: snd/timer DEVPATH: /devices/virtual/sound/timer SUBSYSTEM: sound ACTION: add DEVNAME: DEVPATH: /devices/platform/ehci-platform/usb1/1-1/1-1:1.0/sound/card0 SUBSYSTEM: sound ACTION: add DEVNAME: snd/controlC0 DEVPATH: /devices/platform/ehci-platform/usb1/1-1/1-1:1.0/sound/card0/controlC0 SUBSYSTEM: sound ACTION: add DEVNAME: snd/pcmC0D0p DEVPATH: /devices/platform/ehci-platform/usb1/1-1/1-1:1.0/sound/card0/pcmC0D0p SUBSYSTEM: sound ACTION: add DEVNAME: snd/pcmC0D0c DEVPATH: /devices/platform/ehci-platform/usb1/1-1/1-1:1.0/sound/card0/pcmC0D0c SUBSYSTEM: sound ACTION: add DEVNAME: dsp DEVPATH: /devices/platform/ehci-platform/usb1/1-1/1-1:1.0/sound/card0/dsp SUBSYSTEM: sound ACTION: add DEVNAME: audio DEVPATH: /devices/platform/ehci-platform/usb1/1-1/1-1:1.0/sound/card0/audio SUBSYSTEM: sound ACTION: add DEVNAME: mixer DEVPATH: /devices/platform/ehci-platform/usb1/1-1/1-1:1.0/sound/card0/mixer SUBSYSTEM: sound This fixes #21466. Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 48366
* ca-certificates: update to version 20160104Felix Fietkau2016-01-171-3/+5
| | | | | | | | | | - update to latest version 20160104 - remove cpu dependency (PKGARCH:=all) - set myself as package maintainer Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com> SVN-Revision: 48271
* procd: align early init PATH with rest of OpenWrtJo-Philipp Wich2016-01-141-3/+3
| | | | | | | | | | This fixes diverging executable search paths observed in programs launched throughn etifd which in turn inherited the search path from procd early on boot. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 48235
* ubus: update to the latest version, fixes an acl related crashFelix Fietkau2016-01-131-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48226