aboutsummaryrefslogtreecommitdiffstats
path: root/package/system/mtd
Commit message (Collapse)AuthorAgeFilesLines
* mtd: mark as nonshared to fix FS#484Mirko Parthey2018-06-011-0/+2
| | | | | | | | | | The mtd tool is built with different configurations depending on the target. For example, brcm47xx adds the fixtrx subcommand, without which an image fails when booting the second time. Mark the mtd package as nonshared to really fix FS#484. Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
* mtd: fix erase handling with partition offset on writeFelix Fietkau2018-04-201-1/+1
| | | | | | | | When a partition offset is given, it is used in an lseek call, which affects write, but not erase. Add it to the offset for erase calls as well Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: add support for D-Link DAP-1522 A1George Hopkins2018-02-131-1/+1
| | | | | | | | | | | | | | | | | | D-Link DAP-1522 is a wireless bridge/access point with 4 LAN ports and a dual-band wireless chipset. Specifications: - Ralink RT2880 - 32 MB of RAM - 4 MB of Flash - 4x 10/100/1000 Mbps Ethernet (RTL8366SR) - 802.11abgn (RT2850) Flash Instructions: 1. Download lede-ramips-rt288x-dap-1522-a1-squashfs-factory.bin 2. Open the web interface and upload the image Signed-off-by: George Hopkins <george-hopkins@null.net>
* mtd: add fixwrg commandGeorge Hopkins2018-02-134-3/+233
| | | | | | Add a command to fix WRG headers, based on wrgg.c. Signed-off-by: George Hopkins <george-hopkins@null.net>
* mtd: add fixwrgg commandStijn Tintel2016-10-275-3/+239
| | | | | | | Based on fixseama. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
* mtd: fix endianness detection on muslStijn Tintel2016-10-272-0/+2
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
* package/system/mtd: fix usage messagePaul Wassi2016-10-261-1/+1
| | | | | | Minor fix in the usage message on the explanation of the -p option. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* system/mtd: drop Build/Prepare rule in favor of default oneAlexandru Ardelean2016-10-151-5/+0
| | | | Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* mtd: fix up error messagesJohn Crispin2016-10-152-2/+2
| | | | | | remove the "Error fixing up TRX header" message which is misleading. Signed-off-by: John Crispin <john@phrozen.org>
* mtd: fix building with glibcJosua Mayer2016-08-181-0/+1
| | | | | | | | src/linksys_bootcount.c misses to include stdint.h. Apparently musl doesn't mind and includes this header by default, but glibc does not and causes the build to fail. Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
* mtd: support -c (datasize) option for fixseama commandRafał Miłecki2016-06-203-7/+9
| | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: add linksys_bootcount for ipq806xAdrian Panella2016-06-131-0/+1
| | | | | | Reset bc is needed for Linksys EA8500's dual boot. Signed-off-by: Adrian Panella <ianchi74@outlook.com>
* mtd: fix typo in error message for 'c' optionRafał Miłecki2016-06-111-1/+1
| | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* treewide: replace nbd@openwrt.org with nbd@nbd.nameFelix Fietkau2016-06-076-6/+6
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mtd: imagetag: fix compilation with changed mtd_fixtrx callRafał Miłecki2016-05-111-1/+4
| | | | | | Function mtd_fixtrx was changed during trx improvements. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: add -c option for specifying amount of data to be used for checksumRafał Miłecki2016-05-093-12/+31
| | | | | | | | | | | | | | | So far fixtrx was calculating checksum over amount of data matching partition erase size. It was mostly a workaround of checksum problem after changing anything in initial TRX content (e.g. formatting JFFS2). Its main purpose was to make bootloader accept modified TRX. This didn't provide much protection of flash data against corruption. This new option lets caller request calculating checksum over a bigger amount of data. It may be used e.g. to include whole kernel data for checksum and hopefully make bootloader go info failsafe mode if something goes wrong. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: trx: use separated buffer for TRX headerRafał Miłecki2016-05-091-5/+18
| | | | | | | | We plan to adjust usage of the main buffer to allow reading custom amount of data for CRC32. This means we need another buffer that will be always block aligned. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: seama: exit with error if Seama header wasn't foundrmilecki2016-05-091-1/+1
| | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: seama: fix image data handlingrmilecki2016-05-091-28/+18
| | | | | | | | | | | | 1) Put sanity checks in one place 2) Respect provided offset 3) Read only as much data as needed for MD5 calculation Thanks to the last change this is a great speedup and memory saver. On devices with NAND flash we were allocating & reading about 128 MiB while something about 8 MiB is enough. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: seama: move buf allocation to the MD5 functionrmilecki2016-05-091-16/+22
| | | | | | This buf is only used in this function now, so lets move it there. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: seama: update MD5 using header in the first block bufferrmilecki2016-05-091-4/+3
| | | | | | | This will allow separating first block buffer from a buffer used for MD5 calculation. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: seama: add md5 to header structrmilecki2016-05-092-12/+11
| | | | | | | This allows us to drop some extra offset calculations and simplifies code a bit. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: check for Seama magic early when fixing MD5rmilecki2016-05-091-7/+21
| | | | | | | This avoid long (and unneeded) process of reading all data in case of running on MTD not containig Seama entity. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: add missing breaks in a switchrmilecki2016-05-091-0/+2
| | | | | | | On platforms supporting both: TRX and Seama calling "fixtrx" was resulting in trying to fix Seama as well. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: use tabs for indentsrmilecki2016-05-091-7/+7
| | | | | | This makes code style consistent across the whole file. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: fix reading of image magic bytes in smaller chunksJohn Crispin2016-03-031-5/+12
| | | | | | | | | | | | | | | The image_check currently fails when it cannot read all magic bytes in a single chunk. But this can happen when the data are read from a pipe. This currently breaks the openmesh.sh upgrade script with musl because it uses dd with a blocksize of 1 to copy the image file to the mtd process. The read can simply be repeated until enough bytes are read for the magic byte check. It only stops when either an error was returned or 0 bytes were read. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 48891
* mtd: fix Seama format after replacing EOF with sysupgrade dataRafał Miłecki2016-02-101-2/+13
| | | | | | | | | | Seama header has MD5 similarly to TRX and its CRC32. We need to update it after replacing anything in Seama entity content to make bootloader accept it. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48688
* mtd: detect image format when writingRafał Miłecki2016-02-063-13/+60
| | | | | | | | | | | | | | | Recently TRX checking code was changed to detect Seama format and don't abort whole writing operation because of it. This isn't a good long-term solution. It's a poor idea to teach every format handler recognizing all possible formats. Instead it should be handled in a generic code which should run check depending on the detected format. This will also allow further improvements like fixing formats other than TRX after replacing JFFS2. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48639
* mtd: allow writing Seama files to "firmware" on Broadcom targetsRafał Miłecki2016-01-281-0/+6
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48534
* mtd: enable "fixseama" on bcm53xxRafał Miłecki2016-01-281-1/+1
| | | | | | | | There are D-Link bcm53xx devices using Seama format. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48521
* kirkwood: support Linksys boot counter on EA[34]500Luka Perkov2015-11-101-0/+1
| | | | | | | | | | | | | This is done with existing code from the WRT1900AC port. It makes sure the "auto_recovery" bootloader option is set, and resets the s_env boot counter after a successful boot. This gives users without a serial console connection some measure of safety. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47433
* mvebu: add support for the Linksys boot counterImre Kaloz2015-08-195-1/+129
| | | | | | | | | | | | | The u-boot boot counter was never reset after a successful boot, which sometimes could make some variables become out of sync. This patch adds support for the boot counter and enables auto_recovery unconditionally. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 46690
* mtd: add missing <endian.h> includeFelix Fietkau2015-06-051-0/+1
| | | | | | | | | | | | | | trx.c in mtd would not include endian.h, so on systems that do not have this header implicitly included from the other headers (like musl), both __BYTE_ORDER and __BIG_ENDIAN would be undefined and thus 0, leading to it always presuming a big-endian system. this would lead to issues when running mtd fixtrx on little-endian systems, as it would never recognize the TRX magic as result of the broken STORE32_LE() macro. Signed-off-by: Shiz <hi@shiz.me> Tested-by: Shiz <hi@shiz.me> SVN-Revision: 45896
* mtd: fix md5sum error checkingJohn Crispin2015-03-051-1/+1
| | | | | | | | | | | | | | In mtd_verify(), the return value of md5sum() has been interpreted as error if nonzero, while the function returns number of processed bytes, which caused mtd_verify() to always fail. This patch fixes error checking to interpret only negative values as errors. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> SVN-Revision: 44605
* package: mtd: move bcm963xx_tag definition into source codeJonas Gorski2015-02-271-1/+92
| | | | | | | | | | Remove the need for the header file to be exported - we don't need most of it anyway; all we care about are the offset of the rootfs length and header crc fields. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44557
* mtd: make the dump commnd honour the -o optionJohn Crispin2014-12-031-6/+5
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43512
* mtd: make the mtd dump call run properly on nand flashJohn Crispin2014-12-021-5/+18
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43503
* mtd: add ability to dump a mtd deviceJohn Crispin2014-12-021-5/+57
| | | | | | | | | this can be used on nand flashes and will skip bad blocks and run ecc on the read data before dumping it. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43500
* mtd: fix 2 compiler warningsJohn Crispin2014-11-261-2/+1
| | | | | | | | | mtd.c:544:7: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘ssize_t’ [-Wformat] mtd.c:602:1: warning: label ‘done’ defined but not used [-Wunused-label] Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43383
* license info - revert r43155John Crispin2014-11-031-1/+1
| | | | | | | | turns out that r43155 adds duplicate info. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43167
* Add more license tags with SPDX identifiersJohn Crispin2014-11-031-1/+1
| | | | | | | | | | | | | | | | | | Note, that licensing stuff is a nightmare: many packages does not clearly state their licenses, and often multiple source files are simply copied together - each with different licensing information in the file headers. I tried hard to ensure, that the license information extracted into the OpenWRT's makefiles fit the "spirit" of the packages, e.g. such small packages which come without a dedicated source archive "inherites" the OpenWRT's own license in my opinion. However, I can not garantee that I always picked the correct information and/or did not miss license information. Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 43155
* Add a few SPDX tagsSteven Barth2014-11-021-1/+1
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 43151
* bcm53xx: add fixtrxHauke Mehrtens2014-09-211-0/+1
| | | | | | | | | Without running fixtrx the image will not boot at the second time, because the CRC the boot loader check is invalid at that time. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 42639
* mtd: disable trx_check() for ar71xx, fixes a regression introduced in r42403Felix Fietkau2014-09-021-0/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42405
* mtd: Fix trx check after partition rename ("linux" to "firmware")Felix Fietkau2014-09-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | On brcm47xx (Huawei E970), I noticed that sysupgrade now tries to flash trx images which don't fit into the flash, resulting in non-booting system. I found that mtd does trx size checking only when flashing to a partition called "linux". This patch changes this to be "firmware". This matches the following patch which changed partition name in bcm47xxpart.c driver to "firmware": commit 86b4d5ef68ca77ff6724ebb9bddd6b93239c87fc Author: hauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73> Date: Sun Dec 1 16:32:32 2013 +0000 brcm47xx: use "firmware" partition name ... Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 38973 Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de> SVN-Revision: 42403
* mtd: fix compile error with muslFelix Fietkau2014-05-211-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40819
* mtd: improve mtd detectionJohn Crispin2014-03-301-1/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40301
* mtd: add support for bad blocks in NAND flashFelix Fietkau2014-03-263-5/+56
| | | | | | | | | | | | | NAND flash is very likely to contain bad blocks. Currently, mtd and therefore sysupgrade fails when it encounters a single bad block, potentially leaving an unbootable system. This patch allows the mtd utility to skip bad blocks in NAND flash and complete sysupgrade successfully. Patch by: Matthew Redfearn <matt.redfearn@nxp.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40021
* mtd: add a "mtd verify" callJohn Crispin2013-11-193-2/+72
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38871
* ar71xx: Unifi AP Pro sysupgrade patchFelix Fietkau2013-11-141-3/+12
| | | | | | | | | | | | | | | | | | The current implementation of mtd will not append the backup file created by sysupgrade to the correct partition, as mtd will append the data to first jffs2 partition it finds. As the kernel is also stored on a jffs2 partition (which resides before the overlay partition), the data will be appended to this partition. To fix this problem, a new option -s <number> skip the first n bytes when appending data to the jffs2 partiton, defaults to "0" is added to mtd. Signed-off-by: Peter Wagner <tripolar@gmx.at> SVN-Revision: 38807
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 16:52:34 +0000