aboutsummaryrefslogtreecommitdiffstats
path: root/package/network
Commit message (Collapse)AuthorAgeFilesLines
* umbim: allow forcing DHCP/DHCPv6 configurationLech Perczak2023-05-071-8/+8
| | | | | | | | | | | To support the widest variety of modems, allow restoring previous behaviour of configuring the link throug means of DHCP(v6) exclusively. Change the default value of "dhcp" and "dhcpv6" UCI options to "auto", while keeping the default behaviour of "prefer out-of-band configuration", intact. Setting "dhcp" or "dhcpv6" to boolean 1 will now force using DHCP and DHCPv6, respectively. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* iproute2: update to 6.3.0Nick Hainke2023-05-071-2/+2
| | | | | | | Release Notes: https://lore.kernel.org/netdev/20230427090253.7a92616b@hermes.local/T/ Signed-off-by: Nick Hainke <vincent@systemli.org>
* umbim: include MBIM-provided DNS servers also with DHCP modeLech Perczak2023-04-291-15/+18
| | | | | | | | In MBIM interfaces, DNS servers may be provided out-of-band regardless whether DHCP is used for configuration, or not. Move the DNS configuration outside "if" blocks to support that. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: extract common code from static and dhcp(v6) setup procedureLech Perczak2023-04-291-34/+16
| | | | | | | Beginnings and endings of sub-interface creation procedure were literally duplicates - extract them outside if "if" blocks Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: handle MTU configurationLech Perczak2023-04-291-2/+16
| | | | | | | | | Allow setting interface MTU through UCI. If this is not set, use MBIM-provided MTU, if provided through control channel. If separate MTUs are provided for IPv4 and IPv6, apply larger of them. This is very unlikely and possible only for IPv4v6 dual-stack configuration. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: delegate RFC7278 IPv6 prefixes from OOB configLech Perczak2023-04-291-0/+6
| | | | | | | Delegate prefixes received through MBIM control channel the same way, as would be done through DHCP, according to RFC7278. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: drop IP configuration parsing using 'eval'Lech Perczak2023-04-291-1/+0
| | | | | | Finally, when new helper is in use, drop old IP configuration parser. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: support multiple-valued configuration fieldsLech Perczak2023-04-291-10/+32
| | | | | | | | | MBIM supports multiple values for IP address and DNS server, and such configuration is available through output of MBIM. Use new helper method to support adding multiple addresses and DNS servers to static interfaces for both IPv4 and IPv6. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: add "_proto_mbim_get_field" helperLech Perczak2023-04-291-0/+12
| | | | | | | | | Add a new helper to extract IP configuration from umbim output. This is required to extract fields which can possibly have multiple values, namely IP addresses and DNS servers, and get rid of primitive parser using 'eval' builtin without support for this. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: log output of 'config' stepLech Perczak2023-04-291-1/+3
| | | | | | | | Display full configuration obtained using MBIM control channel in the log, from umbim output verbatim, for easier troubleshooting, and in preparation for parser refactoring. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: pass ipXtable to child interfacesLech Perczak2023-04-291-2/+8
| | | | | | | | Inspired by commti e51aa699f7ca, allow setting specific routing tables via ip4table and ip6table options, by passing them on child interfaces created by MBIM protocol handler. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: respect 'Enable IPv6 negotiation' optionLech Perczak2023-04-291-0/+4
| | | | | | | Don't bring IPv6 part of interface up if it's disabled, or system does not support it. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: use static config by default, fallback to DHCPLech Perczak2023-04-291-4/+7
| | | | | | | | | Finally, inspired by ModemManager's logic, make static configuration obtained through MBIM control channel, preferred. If IP configuration is not available this way, fallback to DHCP(v6) if enabled, else do not create a sub-interface for unavailable IP type. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: separate DHCPv6 configuration from DHCP(v4)Lech Perczak2023-04-291-3/+4
| | | | | | | | | | Now, that sub-interface setup is split by IP type, and separate checks are performed for DHCP selection, it is possible to control DHCP on v4 an v6 sub-interfaces instantly. Add "dhcpv6" variable, akin to QMI option, to control behaviour of DHCPv6 separately from IPv4 option, which is required for some mobile operators. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: restructure IPv4/IPv6 handlingLech Perczak2023-04-291-29/+25
| | | | | | | | Check whether interface is configured per IP type, not per DHCP. This is preparation to allow fallback to DHCP if static IP configuration is not available, which is the default option for MBIM modems Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: inherit firewall zone membership from parent interfaceLech Perczak2023-04-291-0/+6
| | | | | | | | Fix an issue where subinterfaces were not added to the same firewall zone as their parent. Inspired by 64bb88841fb. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: inherit "peerdns" option from parent interfaceLech Perczak2023-04-291-2/+2
| | | | | | | | MBIM protocol handler should intherit "peerdns" options from parent interface on sub-interfaces, otherwise upstream DNS servers are applied regardless of configuration. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: use IP configuration provided by MBIM by defaultLech Perczak2023-04-291-1/+1
| | | | | | | | | | | | Previously, DHCP was used. According to MBIM Specification v1.0 errata 1 [1], section 10.5.20, MBIM_CID_IP_CONFIGURATION, if MBIM information element containing IP configuration is available, host shall use it, and fall back to in-band mechanisms to acquire it therwise - therefore make static configuration the default. [1] https://www.usb.org/document-library/mobile-broadband-interface-model-v10-errata-1-and-adopters-agreement Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: detect actual connection IP typeLech Perczak2023-04-291-4/+10
| | | | | | | | | | | | Current implementation needlessly creates both IPv4 and IPv6 sub-interfaces for single-stack IP types. Limit this only to selected IP type. While at that, ensure that IP type is also passed to umbim during "connect" phase. In addition, detect the actual established connection type returned by umbim and set up subinterfaces according to that, not to requested configuration. While at that, allow empty IP type explicitly, interpreted as "any" according to MBIM specification. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: fail connect step immediatelyLech Perczak2023-04-291-3/+6
| | | | | | | | | | | | | Subsequent calls to 'umbim connect' do not have any effect if a failure occured, and in such case an infinite loop without timeout is created, leading to possibility of interface stuck at connecting forever. Drop this loop, and issue MBIM disconnect properly, so netifd can restart from scratch. This issue can be observed with Sierra EM7455 at changing APN, which causes network re-registration by default, and a MBIM transaction timeout, which is resolved on next interface bringup by netifd. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: connect session for only the selected PDP typeLech Perczak2023-04-291-48/+60
| | | | | | | | | Previous implementation automatically set up connections for both IPv4 and IPv6, even if one of them isn't supported. Respect the "pdptype" option in the same way, as it is done for QMI or NCM, and only start the respective PDN sessions, if set. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* umbim: add support for non-dhcp modeMartin Schiller2023-04-291-22/+64
| | | | | | | | | | There are mbim compatible wwan modules available which do not support the dhcp autoconfiguration. (e.g. gemalto Cinterion ELS81) This adds the possibility to get the configuration parameters from mbim. Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* hostapd: update to 2023-03-29Nick Hainke2023-04-2254-587/+504
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add patches: - 170-wpa_supplicant-fix-compiling-without-IEEE8021X_EAPOL.patch Remove upstreamed: - 170-DPP-fix-memleak-of-intro.peer_key.patch - 461-driver_nl80211-use-new-parameters-during-ibss-join.patch - 800-acs-don-t-select-indoor-channel-on-outdoor-operation.patch - 992-openssl-include-rsa.patch Automatically refreshed: - 011-mesh-use-deterministic-channel-on-channel-switch.patch - 021-fix-sta-add-after-previous-connection.patch - 022-hostapd-fix-use-of-uninitialized-stack-variables.patch - 030-driver_nl80211-rewrite-neigh-code-to-not-depend-on-l.patch - 040-mesh-allow-processing-authentication-frames-in-block.patch - 050-build_fix.patch - 110-mbedtls-TLS-crypto-option-initial-port.patch - 120-mbedtls-fips186_2_prf.patch - 140-tests-Makefile-make-run-tests-with-CONFIG_TLS.patch - 150-add-NULL-checks-encountered-during-tests-hwsim.patch - 160-dpp_pkex-EC-point-mul-w-value-prime.patch - 200-multicall.patch - 300-noscan.patch - 310-rescan_immediately.patch - 330-nl80211_fix_set_freq.patch - 341-mesh-ctrl-iface-channel-switch.patch - 360-ctrl_iface_reload.patch - 381-hostapd_cli_UNKNOWN-COMMAND.patch - 390-wpa_ie_cap_workaround.patch - 410-limit_debug_messages.patch - 420-indicate-features.patch - 430-hostapd_cli_ifdef.patch - 450-scan_wait.patch - 460-wpa_supplicant-add-new-config-params-to-be-used-with.patch - 463-add-mcast_rate-to-11s.patch - 465-hostapd-config-support-random-BSS-color.patch - 500-lto-jobserver-support.patch - 590-rrm-wnm-statistics.patch - 710-vlan_no_bridge.patch - 720-iface_max_num_sta.patch - 730-ft_iface.patch - 750-qos_map_set_without_interworking.patch - 751-qos_map_ignore_when_unsupported.patch - 760-dynamic_own_ip.patch - 761-shared_das_port.patch - 990-ctrl-make-WNM_AP-functions-dependant-on-CONFIG_AP.patch Manually refresh: - 010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch - 301-mesh-noscan.patch - 340-reload_freq_change.patch - 350-nl80211_del_beacon_bss.patch - 370-ap_sta_support.patch - 380-disable_ctrl_iface_mib.patch - 464-fix-mesh-obss-check.patch - 470-survey_data_fallback.patch - 600-ubus_support.patch - 700-wifi-reload.patch - 711-wds_bridge_force.patch - 740-snoop_iface.patch Tested-by: Packet Please <pktpls@systemli.org> [Fritzbox 4040 (ipq40xx), EAP225-Outdoor (ath79); 802.11s, WPA3 OWE, and WPA3 PSK] Tested-by: Andrew Sim <andrewsimz@gmail.com> [mediatek/filogic] Signed-off-by: Nick Hainke <vincent@systemli.org>
* netifd: update to the latest versionFelix Fietkau2023-04-171-3/+3
| | | | | | 7de5440a520f device: fix segfault when recreating devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tcpdump: update to 4.99.4Nick Hainke2023-04-171-2/+2
| | | | | | | | | Fixes CVE-2023-1801. Changelog can be found here: https://git.tcpdump.org/tcpdump/blob/55bc126b0216cfe409b8d6bd378f65679d136ddf:/CHANGES Signed-off-by: Nick Hainke <vincent@systemli.org>
* odhcpd: bump to latest git HEADChristian Marangi2023-04-041-3/+3
| | | | | | | | | 40ab806 config: use dedicated link local function to check interface a84bff2 netlink: add support for getting interface linklocal 2ea065f Revert "config: recheck have_link_local on interface reload if already init" 4b38e6b config: fix feature for enabling service only when interface RUNNING Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* uqmi: explicitly disconnect IPv6 address familyLech Perczak2023-04-021-0/+1
| | | | | | | | | | Some modems (namely, Telit LE910C4) require the IPv6 connection state to be cleared explicitly, to avoid reporting "no effect" if IPv6 connection is already connected through autoconnect mechanism, or during LTE default bearer attach, which would lead to established session, but without a way to inform protocol handler of the status. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* uqmi: set IPv6 family explicitly in status checkLech Perczak2023-04-021-1/+1
| | | | | | | | | | Some modems require CID to be set explicitly during IPv6 connection status check, others require IPv6 address family to be checked explicitly after establishing connection, in order to provide correct status. Set both fields in the request to satisfy them. Fixes: c8a88118af46 ("uqmi: set CID during 'query-data-status' operation") Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* netifd: strip mask from IP address in DHCP client paramsAndrey Erokhin2023-04-011-1/+1
| | | | | | | ipaddr option can be in CIDR notation, but udhcp wants just an IP address Signed-off-by: Andrey Erokhin <a.erokhin@inango-systems.com>
* dnsmasq: configure dynamic dhcp6 and dhcp4 independentlyIan Dall2023-04-011-2/+4
| | | | | | | | Given ipv6 has SLAAC it is quite plausible to wish to use dynamic dhcp4 but static dhcp6. This patch keeps dynamicdhcp as the default option for both, but is overridden by dynamicdhcpv6 or dynamicdhcpv4 Signed-off-by: Ian Dall <ian@beware.dropbear.id.au>
* dnsmasq: add dhcphostsfile to ujail sandboxRuben Jenster2023-04-011-0/+1
| | | | | | | The dhcphostsfile must be mounted into the (ujail) sandbox. The file can not be accessed without this mount. Signed-off-by: Ruben Jenster <rjenster@gmail.com>
* comgt: ncm: support Mikrotik R11e-LTE6 modemSzabolcs Hubai2023-03-291-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Mikrotik R11e-LTE6 modem is similar to ZTE MF286R modem, added earlier: it has a Marvel chip, able to work in ACM+RNDIS mode, knows ZTE specific commands, runs OpenWrt Barrier Breaker fork. While the modem is able to offer IPv6 address, the RNDIS setup is unable to complete if there is an IPv6 adress. While it works in ACM+RNDIS mode, the user experience isn't as good as with "proto 3g": the modem happily serves a local IP (192.168.1.xxx) without internet access. Of course, if the modem has enough time (for example at the second dialup), it will serve a public IP. Modifing the DHCP Lease (to a short interval before connect and back to default while finalizing) is a workaround to get a public IP at the first try. A safe workaround for this is to excercise an offline script of the pingcheck program: simply restart (ifdown - ifup) the connection. Another pitfall is that the modem writes a few messages at startup, which confuses the manufacturer detection algorithm and got disabled. daemon.notice netifd: Interface 'mikrotik' is setting up now daemon.notice netifd: mikrotik (2366): Failed to parse message data daemon.notice netifd: mikrotik (2366): WARNING: Variable 'ok' does not exist or is not an array/object daemon.notice netifd: mikrotik (2366): Unsupported modem daemon.notice netifd: mikrotik (2426): Stopping network mikrotik daemon.notice netifd: mikrotik (2426): Failed to parse message data daemon.notice netifd: mikrotik (2426): WARNING: Variable '*simdetec:1,sim' does not exist or is not an array/object daemon.notice netifd: mikrotik (2426): Unsupported modem daemon.notice netifd: Interface 'mikrotik' is now down A workaround for this is to use the "delay" option in the interface configuration. I want to thank Forum members dchard (in topic Adding support for MikroTik hAP ac3 LTE6 kit (D53GR_5HacD2HnD)) [1] and mrhaav (in topic OpenWrt X86_64 + Mikrotik R11e-LTE6) [2] for sharing their experiments and works. Another information page was found at eko.one.pl [3]. [1]: https://forum.openwrt.org/t/137555 [2]: https://forum.openwrt.org/t/151743 [3]: https://eko.one.pl/?p=modem-r11elte Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com>
* comgt: add quirk for Mikrotik modems based on Mikrotik R11e-LTE6Szabolcs Hubai2023-03-292-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MikroTik R11e-LTE6 modem goes into flight mode (CFUN=4) at startup and the radio is off (*RADIOPOWER: 0): AT+RESET OK OK *SIMDETEC:2,NOS *SIMDETEC:1,SIM *ICCID: 8936500119010596302 *EUICC: 1 +MSTK: 11, D025....74F3 *ADMINDATA: 0, 2, 0 +CPIN: READY *EUICC: 1 *ECCLIST: 5, 0, 112, 0, 000, 0, 08, 0, 118, 0, 911 +CREG: 0 $CREG: 0 +CESQ: 99,99,255,255,255,255 *CESQ: 99,99,255,255,255,255,0 +CGREG: 0 +CEREG: 0 +CESQ: 99,99,255,255,255,255 *CESQ: 99,99,255,255,255,255,0 *RADIOPOWER: 0 +MMSG: 0, 0 +MMSG: 0, 0 +MMSG: 1, 0 +MPBK: 1 While the chat script is able to establish the PPP connection, it's closed instantly by the modem: LCP terminated by peer. local2.info chat[7000]: send (ATD*99***1#^M) local2.info chat[7000]: expect (CONNECT) local2.info chat[7000]: ^M local2.info chat[7000]: ATD*99***1#^M^M local2.info chat[7000]: CONNECT local2.info chat[7000]: -- got it local2.info chat[7000]: send ( ^M) daemon.info pppd[6997]: Serial connection established. kern.info kernel: [ 453.659146] 3g-mikrotik: renamed from ppp0 daemon.info pppd[6997]: Renamed interface ppp0 to 3g-mikrotik daemon.info pppd[6997]: Using interface 3g-mikrotik daemon.notice pppd[6997]: Connect: 3g-mikrotik <--> /dev/ttyACM0 daemon.info pppd[6997]: LCP terminated by peer daemon.notice pppd[6997]: Connection terminated. daemon.notice pppd[6997]: Modem hangup daemon.info pppd[6997]: Exit. daemon.notice netifd: Interface 'mikrotik' is now down Sending "AT+CFUN=1" to modem deactivates the flight mode and solves the issue: daemon.notice netifd: Interface 'mikrotik' is setting up now daemon.notice netifd: mikrotik (7051): sending -> AT+CFUN=1 daemon.notice pppd[7137]: pppd 2.4.9 started by root, uid 0 local2.info chat[7140]: abort on (BUSY) local2.info chat[7140]: abort on (NO CARRIER) local2.info chat[7140]: abort on (ERROR) local2.info chat[7140]: report (CONNECT) local2.info chat[7140]: timeout set to 10 seconds local2.info chat[7140]: send (AT&F^M) local2.info chat[7140]: expect (OK) local2.info chat[7140]: ^M local2.info chat[7140]: +CESQ: 99,99,255,255,255,255^M local2.info chat[7140]: ^M local2.info chat[7140]: *CESQ: 99,99,255,255,255,255,0^M local2.info chat[7140]: AT&F^MAT&F^M^M local2.info chat[7140]: OK local2.info chat[7140]: -- got it ... local2.info chat[7140]: send (ATD*99***1#^M) local2.info chat[7140]: expect (CONNECT) local2.info chat[7140]: ^M local2.info chat[7140]: ATD*99***1#^M^M local2.info chat[7140]: CONNECT local2.info chat[7140]: -- got it local2.info chat[7140]: send ( ^M) daemon.info pppd[7137]: Serial connection established. kern.info kernel: [ 463.094254] 3g-mikrotik: renamed from ppp0 daemon.info pppd[7137]: Renamed interface ppp0 to 3g-mikrotik daemon.info pppd[7137]: Using interface 3g-mikrotik daemon.notice pppd[7137]: Connect: 3g-mikrotik <--> /dev/ttyACM0 daemon.warn pppd[7137]: Could not determine remote IP address: defaulting to 10.64.64.64 daemon.notice pppd[7137]: local IP address 100.112.63.62 daemon.notice pppd[7137]: remote IP address 10.64.64.64 daemon.notice pppd[7137]: primary DNS address 185.29.83.64 daemon.notice pppd[7137]: secondary DNS address 185.62.131.64 daemon.notice netifd: Network device '3g-mikrotik' link is up daemon.notice netifd: Interface 'mikrotik' is now up To send this AT command to the modem the "runcommand.gcom" script dependency is moved from comgt-ncm to comgt. As the comgt-ncm package depends on comgt already, this change is a NOOP from that point of view. But from the modem's point it is a low hanging fruit as the modem is usable with installing comgt and kmod-usb-ncm packages. Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com>
* ncm: add error check and retry mechanism for gcom callMike Wilson2023-03-281-4/+19
| | | | | | | | | | | | This patch solves the problem of receiving "error" responses when initially calling gcom. This avoids unnecessary NO_DEVICE failures. A retry loop retries the call after an "error" response within the specified delay. A successful response will continue with the connection immediately without waiting for max specified delay, bringing the interface up sooner. Signed-off-by: Mike Wilson <mikewse@hotmail.com>
* firewall4: update to the latest versionFelix Fietkau2023-03-241-3/+3
| | | | | | | | | | | 39e8c70957c7 fw4: fix handling the ipset "comment" option e6e82a55206c fw4: add further symbolic ICMP type declarations ce9a37829a76 tests: add testcase for automatic includes 30ee17a9c65d fw4: fix syntax errors in ICMP type declarations 1ecfadd52291 fw4: remove accidentally committed .orig and .rej file 04a06bd70b98 fw4: enable flowtable counters Signed-off-by: Felix Fietkau <nbd@nbd.name>
* odhcpd: bump to latest git HEADChristian Marangi2023-03-241-3/+3
| | | | | | 29c934d config: recheck have_link_local on interface reload if already init Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* odhcpd: bump to latest git HEADChristian Marangi2023-03-221-4/+4
| | | | | | | | | | | 7c0f603 router: skip RA and wait for LINK-LOCAL to be assigned ba30afc config: skip interface setup if interface not IFF_RUNNING 06b111e Revert "odhcpd: Reduce error messages" 90d6cc9 odhcpd: Reduce error messages Also drop AUTORELEASE since it got deprecated. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* treewide: add support for "lto" in PKG_BUILD_FLAGSAndre Heider2023-03-2112-36/+23
| | | | | | | | | | | | | | | | This reduces open coding and allows to easily add a knob to enable it treewide, where chosen packages can still opt-out via "no-lto". Some packages used LTO, but not the linker plugin. This unifies 'em all to attempt to produce better code. Quoting man gcc(1): "This improves the quality of optimization by exposing more code to the link-time optimizer." Also use -flto=auto instead of -flto=jobserver, as it's not guaranteed that every buildsystem uses +$(MAKE) correctly. Signed-off-by: Andre Heider <a.heider@gmail.com>
* treewide: add support for "gc-sections" in PKG_BUILD_FLAGSAndre Heider2023-03-2110-27/+27
| | | | | | | | | | | | | | | This reduces open coding and allows to easily add a knob to enable it treewide, where chosen packages can still opt-out via "no-gc-sections". Note: libnl, mbedtls and opkg only used the CFLAGS part without the LDFLAGS counterpart. That doesn't help at all if the goal is to produce smaller binaries. I consider that an accident, and this fixes it. Note: there are also packages using only the LDFLAGS part. I didn't touch those, as gc might have been disabled via CFLAGS intentionally. Signed-off-by: Andre Heider <a.heider@gmail.com>
* treewide: replace PKG_USE_MIPS16:=0 with PKG_BUILD_FLAGS:=no-mips16Andre Heider2023-03-212-2/+2
| | | | | | | Keep backwards compatibility via PKG_USE_MIPS16 for now, as this is used in all package feeds. Signed-off-by: Andre Heider <a.heider@gmail.com>
* nftables: update to 1.0.7Nick Hainke2023-03-191-2/+2
| | | | | | | Release Notes: https://marc.info/?l=netfilter-devel&m=167873533214563&w=2 Signed-off-by: Nick Hainke <vincent@systemli.org>
* odhcp6c: add "verbose" optionMark Mentovai2023-03-142-3/+6
| | | | | | | | | odhcp6c logs messages related to its activity when invoked with -v, but there is no way to configure this from within OpenWrt. This adds a UCI option to turn on odhcp6c logging, disabled by default. To enable, set, for example, network.wan6.verbose = 1. Signed-off-by: Mark Mentovai <mark@mentovai.com>
* qosify: update to the latest versionFelix Fietkau2023-03-071-3/+3
| | | | | | | | | ca4509cf84d2 bpf: switch to using bpf_skb_utils.h d064439009d0 qosify-bpf: skip unnecessary flow lookups 9c625ae96f2d map: fix deleting port based rules 9a47ea4b683d map: fix return code check for bpf_map_get_next_key calls Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: enable radius server supportFelix Fietkau2023-03-071-1/+1
| | | | | | This is useful in combination with the built-in eap server support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add missing return code for the bss_mgmt_enable ubus methodFelix Fietkau2023-03-071-0/+2
| | | | | | Fixes bogus errors on ubus calls Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add support for defining multiple acct/auth serversFelix Fietkau2023-03-071-25/+25
| | | | | | | This allows adding backup servers, in case the primary ones fail. Assume that port and shared secret are going to be the same. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* binutils: Update to version 2.40Hauke Mehrtens2023-03-051-1/+1
| | | | | | | | | | | | | | | | | | | binutils 2.39: https://lists.gnu.org/archive/html/info-gnu/2022-08/msg00002.html binutils 2.40: https://lists.gnu.org/archive/html/info-gnu/2023-01/msg00003.html This version includes a new libsframe.so library, pack it into the libbfd package as it is used by this library. Also deactivate some optional configuration options for now. An extra patch to fix compile problem in AARCH64 is added. gprofng needs a C++ standard library, deactivate it for now. Activate feature-disassembler-init-styled in bpftools too to fix compilation with the updated binutils. An bpftool version 7.0 or later is needed for binutils 2.39 and later. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bpftool: Update to version 7.1.0Hauke Mehrtens2023-03-053-11/+11
| | | | | | | | | | | | | | | | | | | bpftool changelog: https://github.com/libbpf/bpftool/releases libbpf changelog: https://github.com/libbpf/libbpf/releases This updates the bfptool to version 7.1.0. This also includes an update of the libbpf to version 1.1. This also adds some new feature options and removes some old ones which were also removed form the source code. zlib for example is now mandatory. Add -flto also to LD flags to make it really work. Before this change bpftool was on a git commit between version 6.7 and 6.8 and libbpf was on a commit between version 0.7 and 0.8. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* dnsmasq: bump to v2.89Kevin Darbyshire-Bryant2023-02-253-5/+5
| | | | Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* netifd: update to the latest versionHauke Mehrtens2023-02-251-4/+4
| | | | | | | | | | ed65a00 netifd: bridge: Fix format string position 19372d8 netifd: Fix multiple -Wsign-compare warnings 8ebf033 netifd: Do not return values in void function c77417a netifd: Explicitly zero initialize variables 463a120 netifd: Activate -Wextra compile warnings Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 22:04:10 +0000