aboutsummaryrefslogtreecommitdiffstats
path: root/package/network/utils/uqmi
Commit message (Collapse)AuthorAgeFilesLines
* network/uqmi: pipe the output off qmi_wds_stop to /dev/nullFlorian Eckert2018-04-191-3/+8
| | | | | | | | | | Pipe uqmi output from qmi_wds_stop function into /dev/null. This will supress the following output in proto teardown. netifd: wwan (x): "No effect" netifd: wwan (x): Command failed: Permission denied Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* uqmi: ensure CID is a numeric value before proceedingKoen Vandeputte2018-02-201-4/+4
| | | | | | | | | | | The current implementation only checked if uqmi itself executed correctly which is also the case when the returned value is actually an error. Rework this, checking that CID is a numeric value, which can only be true if uqmi itself also executed correctly. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* uqmi: bump package releaseKoen Vandeputte2018-02-131-1/+1
| | | | | | fixes: da8990e717e1 ("uqmi: use built-in command for data-link verification") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* uqmi: use built-in command for data-link verificationKoen Vandeputte2018-02-131-1/+19
| | | | | | | | | | | uqmi contains a command for directly querying the modem if there is a valid data connection, so let's use it. This avoids the cases were all previous tests are succesful, but the actual data link is not up for some reasons, leading to states were we thought the link was up when it actually wasn't .. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* uqmi: use correct value for connection checkingKoen Vandeputte2018-02-131-4/+8
| | | | | | | | | | | | | | Originally, the implementation only checked if uqmi command execution succeeded properly without actually checking it's returned data. This lead to a pass, even when the returned data was indicating an error. Rework the verification to actually check the returned data, which can only be correct if the uqmi command itself also executed correctly. On command execution success, value "pdh_" is a pure numeric value. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* uqmi: use general method for state cleaningKoen Vandeputte2018-02-131-10/+4
| | | | | | | | | | Debugging shows that using the general method properly cleans on each run, while the method specifying the client-ID shows "No effect" even while in connected state. Fixes several connectivity issues seen on specific modems. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* uqmi: silence error on pin verificationKoen Vandeputte2018-01-221-1/+1
| | | | | | | | | | | | If a device only supports the 2nd verification method (uim), the first method will fail as expected reporting an error: "Command not supported" Silence both separate methods and only report an error regarding pin verification if both fail. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* uqmi: fix raw-ip mode for newer lte modemsKoen Vandeputte2018-01-152-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some newer LTE modems, like the MC7455 or EC25-E do not support "802.3" mode, and will stay in "raw-ip" regardless of the mode being set. In this case, the driver must be informed that it should handle all packets in raw mode. [1] This commit fixes connectivity issues for these devices. Before: [ Node 5 ] udhcpc -i wwan0 udhcpc: started, v1.27.2 udhcpc: sending discover udhcpc: sending discover udhcpc: sending discover After: [ Node 5 ] udhcpc -i wwan0 udhcpc: started, v1.27.2 udhcpc: sending discover udhcpc: sending select for 100.66.245.226 udhcpc: lease of 100.66.245.226 obtained, lease time 7200 udhcpc: ifconfig wwan0 100.66.245.226 netmask 255.255.255.252 broadcast + udhcpc: setting default routers: 100.66.245.225 [1] https://lists.freedesktop.org/archives/libqmi- devel/2017-January/002064.html Tested on cns3xxx using a Sierra Wireless MC7455 LTE-A Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> [bumped PKG_RELEASE] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* treewide: replace LEDE_GIT with PROJECT_GITJo-Philipp Wich2018-01-101-1/+1
| | | | | | | Remove LEDE_GIT references in favor to the new name-agnostic PROJECT_GIT variable. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uqmi: replace legacy command invoke with newer typeKoen Vandeputte2017-10-241-7/+7
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* uqmi: also try newer pin verificationKoen Vandeputte2017-10-241-1/+1
| | | | | | | | | Newer devices tend to only support the newer version of the pin verification command, so also try that one. Fixes PIN issues with modems like the Sierra Wireless MC7455 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* net: uqmi: fix blocking in endless loops when unplugging deviceAlexandru Ardelean2017-10-091-0/+2
| | | | | | | | | | | If you unplug a QMI device, the /dev/cdc-wdmX device disappears but uqmi will continue to poll it endlessly. Then, when you plug it back, you have 2 uqmi processes, and that's bad, because 2 processes talking QMI to the same device [and the same time] doesn't seem to work well. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* uqmi: mark as nonshared because of the usb dependenciesFelix Fietkau2017-01-131-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Revert the recent dependency and metadata scanning reworkFelix Fietkau2017-01-111-1/+1
| | | | | | | | | | | | | | | This reverts the following commits: fbe522d1204149b6c128d55e360bfc15fa8258e1 278ad007ee03c4455c3507322e34b0e3e6ec050d 863888e44f7a1fb1675a2e7a2eaabfec3561d2a2 96daf6352f6e04bc22789466cb5409b93fbec191 cfd83555fc4f0bab18a26f6812da18e64df46ff3 This seems to trigger some mconf bugs when built with all feeds packages, so I will try to find a less intrusive solution before the release. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uqmi: allow build without USB_SUPPORTFelix Fietkau2017-01-111-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* treewide: clean up and unify PKG_VERSION for git based downloadsFelix Fietkau2016-12-221-5/+3
| | | | | | Also use default defintions for PKG_SOURCE_SUBDIR, PKG_SOURCE Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uqmi: add plmn set functionality for netifd proto handlerFlorian Eckert2016-12-221-2/+22
| | | | | | | uqmi has the possibility to allow the modem to start a regsitration process only to this specified plmn Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
* uqmi: Prevent 'POLICY MISMATH' error.Nickolay Ledovskikh2016-12-201-0/+1
| | | | | | | Add uqmi 'sync' command call to release stalled cid when preparing to setup new connection. As a result it prevents 'POLICY MISMATCH' errors. Signed-off-by: Nickolay Ledovskikh <nledovskikh@gmail.com>
* uqmi: bump to latest git HEADJohn Crispin2016-12-201-2/+2
| | | | | | | 8ceeab6 uqmi: Change returned value to QMI_CMD_REQUEST for 'sync' command. 1dc7be1 uqmi: Add sync command to release all cids. Signed-off-by: John Crispin <john@phrozen.org>
* uqmi: add support of using device symlinks.Nickolay Ledovskikh2016-12-201-0/+2
| | | | | | | It's useful when using multiple usb devices that should be bound to certain usb ports. Symlinks are created by hotplug handlers. Signed-off-by: Nickolay Ledovskikh <nledovskikh@gmail.com>
* treewide: clean up download hashesFelix Fietkau2016-12-161-1/+1
| | | | | | Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uqmi: Add support for specifying profile indexMatti Laakso2016-12-142-82/+93
| | | | | | | | | | | | | | Update uqmi to latest version, which brings about support for specifying a call profile index instead of APN. A specific index different from 1 must be used for some service provider and modem combinations. Also change option dhcp to dhcpv6, since IPv4 now always uses DHCP, replace option ipv6 with pdptype, which is less ambiguous, and make autoconnect optional and default it to off for IPv6 due to it not working with statically configured IPv6. Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
* uqmi: moved to WWAN submenuAlberto Bursi2016-11-081-0/+1
| | | | | | Moving uqmi to WWAN submenu Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* qmi: add metric, defaultroute and peerdns options for qmi protocolMarcin Jurkowski2016-10-261-8/+10
| | | | | | | | | | | | | Adds generic network options for qmi protocol dynamic interfaces as suggested by Felix in https://lists.openwrt.org/pipermail/openwrt-devel/2016-February/039794.html. IPv6-related code taken from Bruno's patch https://patchwork.ozlabs.org/patch/584816. This depends on netifd patch https://patchwork.ozlabs.org/patch/686820/. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Signed-off-by: Bruno Randolf <br1@einfach.org>
* uqmi: re-enable autoconnect which was dropped without explanationFelix Fietkau2016-10-121-14/+24
| | | | | | | Fixes a regression in commit 8f24ee638275: "uqmi: Add proper IPv6 support" Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uqmi: always use DHCP for IPv4Felix Fietkau2016-10-121-54/+30
| | | | | | | | | | | Commit 8f24ee638275 ("uqmi: Add proper IPv6 support") changed the code to fetch the IPv4 address via QMI by default instead of using DHCP to make it consistent with the IPv6 codepath. This breaks on at least some Sierra Wireless cards, where data exchanges fail to work until the host has fetched a DHCP lease. Leave v6 as it is, but always use DHCP for v4. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* source: Switch to xz for packages and tools where possibleDaniel Engberg2016-10-061-3/+2
| | | | | | | | | | | * Change git packages to xz * Update mirror checksums in packages where they are used * Change a few source tarballs to xz if available upstream * Remove unused lines in packages we're touching, requested by jow- and blogic * We're relying more on xz-utils so add official mirror as primary source, master site as secondary. * Add SHA256 checksums to multiple git tarball packages Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* uqmi: update to the latest version, adds QMI-in-MBIM supportFelix Fietkau2016-08-241-2/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uqmi: add metric option to interface configFlorian Eckert2016-07-261-2/+7
| | | | | | It is now possible to add an metric option for the qmi proto in dhcp mode. Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
* uqmi: fix option ipv6Florian Eckert2016-07-261-5/+1
| | | | | | | If option ist not set then ipv6 is still enabled on this Interface. Check if variable is zero will fix this issue. Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
* package/*: update git urls for project reposJohn Crispin2016-06-131-1/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* uqmi: move to git.openwrt.orgFelix Fietkau2016-01-041-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48124
* uqmi: Add qmi.sh executable bit and fix option dhcpFelix Fietkau2015-09-212-2/+2
| | | | | | | | | | Using protocol qmi does not work since qmi.sh is not executable. Setting option dhcp explicitely to 0 actually enables it. This patch fixes both problems. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 47014
* uqmi: Add proper IPv6 supportSteven Barth2015-09-112-58/+145
| | | | | | | | | | | | | | | | | | | | | Use the new --ip-family option to start both IPv4 and IPv6 sessions by default. Autoconnect can't be used when starting two sessions, so revert back to using the client IDs and packet data handles for handling the network connection. Some modem firmwares do not implement a RA server, therefore by default use outband IP configuration and static addressing. Some other firmwares report bogus IP configuration with the WDS get current settings command. In this case inband configuration with DHCP/RA can be optionally enabled by setting option dhcp to 1. Per 3GPP standard a /64 prefix is served to all clients, which is extended to LAN as specified in RFC 7278. v2: Restrict the IPv6 gateway route source address Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 46843
* comgt/umbim/uqmi: enable RFC 7278 for 3g/4g by defaultSteven Barth2015-09-031-0/+1
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46780
* uqmi: auto retry when bringup failsJohn Crispin2015-04-211-1/+15
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45556
* network: also shorten virtual interface names of ppp and 3g/4g connectionsSteven Barth2015-04-171-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45479
* ncm, qmi, mbim: Add dependency on wwan packageJohn Crispin2015-03-091-1/+1
| | | | | | | | | | The wwan package holds the hotplug script to set mobile broadband interfaces (un)available. Add it as a dependency to comgt-ncm, uqmi and umbim. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 44631
* uqmi: Add --delete-message for deleting SMS messagesJohn Crispin2014-12-031-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43504
* uqmi: fix SEGFAULT on reading Unicode sms messagesJohn Crispin2014-12-011-2/+2
| | | | | | | | | Added complementary blobmsg_close_table() before returning from function on error. Signed-off-by: Sławomir Demeszko <s.demeszko@wireless-instruments.com> SVN-Revision: 43477
* uqmi: update to the latest version, also set 802.3 data format via the WDA ↵Felix Fietkau2014-11-252-2/+3
| | | | | | | | service Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43381
* uqmi: update to latest git HEADJohn Crispin2014-11-191-2/+2
| | | | | | | | | * fixes a bug in multipart sms * adds a new call to read the sim phone number (partially functioanl) Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43310
* Add a few SPDX tagsSteven Barth2014-11-021-1/+1
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 43151
* uqmi: update to latest git HEADJohn Crispin2014-10-311-3/+3
| | | | | | | | this adds support for pin set/unlock/... and iccid. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43127
* wwan: add a generic 3g/4g protoJohn Crispin2014-10-081-5/+13
| | | | | | | | | this proto handler will detect which of 3g, qmi, mbim, ncm or directip you need for a stick and setup uci automagically Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42837
* uqmi: dont use proto_block_restartJohn Crispin2014-10-081-5/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42835
* uqmi: make the proto depend on the usb driverJohn Crispin2014-10-081-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42834
* uqmi: set data format to 802.3 at startupFelix Fietkau2014-10-021-0/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42724
* uqmi: do not wait for network connection before starting dhcpFelix Fietkau2014-10-021-11/+9
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42723
* uqmi: update to the latest versionFelix Fietkau2014-10-021-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42722
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-04 13:36:18 +0000