aboutsummaryrefslogtreecommitdiffstats
path: root/package/network/utils/comgt
Commit message (Collapse)AuthorAgeFilesLines
* comgt-ncm: add support for UNISOC SL8563 based TOZED TL70-CArınç ÜNAL2023-05-181-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | TOZED TL70-C is an LTE CAT6 cellular modem based on UNISOC SL8563. UNISOC was formerly called Spreadtrum hence the manufacturer name detected on the modem is spreadtrum. The connect and disconnect commands bring up and down the usb0 interface. They are Base64 encoded as that's what the AT command accepts. The modem can do up to 4 APNs by bringing the USB interfaces, usb0 to usb3, up. Setting the USB interfaces up: connmanctl ndisdial AT^NDISDUN="usb0",1,1 connmanctl ndisdial AT^NDISDUN="usb1",1,2 connmanctl ndisdial AT^NDISDUN="usb2",1,3 connmanctl ndisdial AT^NDISDUN="usb3",1,4 Setting the USB interfaces down: connmanctl ndisdial AT^NDISDUN="usb0",0,1 connmanctl ndisdial AT^NDISDUN="usb1",0,2 connmanctl ndisdial AT^NDISDUN="usb2",0,3 connmanctl ndisdial AT^NDISDUN="usb3",0,4 Co-developed-by: Andre Cruz <me@1conan.com> Signed-off-by: Andre Cruz <me@1conan.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* comgt: ncm: support Mikrotik R11e-LTE6 modemSzabolcs Hubai2023-03-291-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Mikrotik R11e-LTE6 modem is similar to ZTE MF286R modem, added earlier: it has a Marvel chip, able to work in ACM+RNDIS mode, knows ZTE specific commands, runs OpenWrt Barrier Breaker fork. While the modem is able to offer IPv6 address, the RNDIS setup is unable to complete if there is an IPv6 adress. While it works in ACM+RNDIS mode, the user experience isn't as good as with "proto 3g": the modem happily serves a local IP (192.168.1.xxx) without internet access. Of course, if the modem has enough time (for example at the second dialup), it will serve a public IP. Modifing the DHCP Lease (to a short interval before connect and back to default while finalizing) is a workaround to get a public IP at the first try. A safe workaround for this is to excercise an offline script of the pingcheck program: simply restart (ifdown - ifup) the connection. Another pitfall is that the modem writes a few messages at startup, which confuses the manufacturer detection algorithm and got disabled. daemon.notice netifd: Interface 'mikrotik' is setting up now daemon.notice netifd: mikrotik (2366): Failed to parse message data daemon.notice netifd: mikrotik (2366): WARNING: Variable 'ok' does not exist or is not an array/object daemon.notice netifd: mikrotik (2366): Unsupported modem daemon.notice netifd: mikrotik (2426): Stopping network mikrotik daemon.notice netifd: mikrotik (2426): Failed to parse message data daemon.notice netifd: mikrotik (2426): WARNING: Variable '*simdetec:1,sim' does not exist or is not an array/object daemon.notice netifd: mikrotik (2426): Unsupported modem daemon.notice netifd: Interface 'mikrotik' is now down A workaround for this is to use the "delay" option in the interface configuration. I want to thank Forum members dchard (in topic Adding support for MikroTik hAP ac3 LTE6 kit (D53GR_5HacD2HnD)) [1] and mrhaav (in topic OpenWrt X86_64 + Mikrotik R11e-LTE6) [2] for sharing their experiments and works. Another information page was found at eko.one.pl [3]. [1]: https://forum.openwrt.org/t/137555 [2]: https://forum.openwrt.org/t/151743 [3]: https://eko.one.pl/?p=modem-r11elte Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com>
* comgt: add quirk for Mikrotik modems based on Mikrotik R11e-LTE6Szabolcs Hubai2023-03-292-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MikroTik R11e-LTE6 modem goes into flight mode (CFUN=4) at startup and the radio is off (*RADIOPOWER: 0): AT+RESET OK OK *SIMDETEC:2,NOS *SIMDETEC:1,SIM *ICCID: 8936500119010596302 *EUICC: 1 +MSTK: 11, D025....74F3 *ADMINDATA: 0, 2, 0 +CPIN: READY *EUICC: 1 *ECCLIST: 5, 0, 112, 0, 000, 0, 08, 0, 118, 0, 911 +CREG: 0 $CREG: 0 +CESQ: 99,99,255,255,255,255 *CESQ: 99,99,255,255,255,255,0 +CGREG: 0 +CEREG: 0 +CESQ: 99,99,255,255,255,255 *CESQ: 99,99,255,255,255,255,0 *RADIOPOWER: 0 +MMSG: 0, 0 +MMSG: 0, 0 +MMSG: 1, 0 +MPBK: 1 While the chat script is able to establish the PPP connection, it's closed instantly by the modem: LCP terminated by peer. local2.info chat[7000]: send (ATD*99***1#^M) local2.info chat[7000]: expect (CONNECT) local2.info chat[7000]: ^M local2.info chat[7000]: ATD*99***1#^M^M local2.info chat[7000]: CONNECT local2.info chat[7000]: -- got it local2.info chat[7000]: send ( ^M) daemon.info pppd[6997]: Serial connection established. kern.info kernel: [ 453.659146] 3g-mikrotik: renamed from ppp0 daemon.info pppd[6997]: Renamed interface ppp0 to 3g-mikrotik daemon.info pppd[6997]: Using interface 3g-mikrotik daemon.notice pppd[6997]: Connect: 3g-mikrotik <--> /dev/ttyACM0 daemon.info pppd[6997]: LCP terminated by peer daemon.notice pppd[6997]: Connection terminated. daemon.notice pppd[6997]: Modem hangup daemon.info pppd[6997]: Exit. daemon.notice netifd: Interface 'mikrotik' is now down Sending "AT+CFUN=1" to modem deactivates the flight mode and solves the issue: daemon.notice netifd: Interface 'mikrotik' is setting up now daemon.notice netifd: mikrotik (7051): sending -> AT+CFUN=1 daemon.notice pppd[7137]: pppd 2.4.9 started by root, uid 0 local2.info chat[7140]: abort on (BUSY) local2.info chat[7140]: abort on (NO CARRIER) local2.info chat[7140]: abort on (ERROR) local2.info chat[7140]: report (CONNECT) local2.info chat[7140]: timeout set to 10 seconds local2.info chat[7140]: send (AT&F^M) local2.info chat[7140]: expect (OK) local2.info chat[7140]: ^M local2.info chat[7140]: +CESQ: 99,99,255,255,255,255^M local2.info chat[7140]: ^M local2.info chat[7140]: *CESQ: 99,99,255,255,255,255,0^M local2.info chat[7140]: AT&F^MAT&F^M^M local2.info chat[7140]: OK local2.info chat[7140]: -- got it ... local2.info chat[7140]: send (ATD*99***1#^M) local2.info chat[7140]: expect (CONNECT) local2.info chat[7140]: ^M local2.info chat[7140]: ATD*99***1#^M^M local2.info chat[7140]: CONNECT local2.info chat[7140]: -- got it local2.info chat[7140]: send ( ^M) daemon.info pppd[7137]: Serial connection established. kern.info kernel: [ 463.094254] 3g-mikrotik: renamed from ppp0 daemon.info pppd[7137]: Renamed interface ppp0 to 3g-mikrotik daemon.info pppd[7137]: Using interface 3g-mikrotik daemon.notice pppd[7137]: Connect: 3g-mikrotik <--> /dev/ttyACM0 daemon.warn pppd[7137]: Could not determine remote IP address: defaulting to 10.64.64.64 daemon.notice pppd[7137]: local IP address 100.112.63.62 daemon.notice pppd[7137]: remote IP address 10.64.64.64 daemon.notice pppd[7137]: primary DNS address 185.29.83.64 daemon.notice pppd[7137]: secondary DNS address 185.62.131.64 daemon.notice netifd: Network device '3g-mikrotik' link is up daemon.notice netifd: Interface 'mikrotik' is now up To send this AT command to the modem the "runcommand.gcom" script dependency is moved from comgt-ncm to comgt. As the comgt-ncm package depends on comgt already, this change is a NOOP from that point of view. But from the modem's point it is a low hanging fruit as the modem is usable with installing comgt and kmod-usb-ncm packages. Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com>
* ncm: add error check and retry mechanism for gcom callMike Wilson2023-03-281-4/+19
| | | | | | | | | | | | This patch solves the problem of receiving "error" responses when initially calling gcom. This avoids unnecessary NO_DEVICE failures. A retry loop retries the call after an "error" response within the specified delay. A successful response will continue with the connection immediately without waiting for max specified delay, bringing the interface up sooner. Signed-off-by: Mike Wilson <mikewse@hotmail.com>
* comgt-ncm: add support for quectel modem EC200T-EUJan-Niklas Burfeind2022-12-072-0/+22
| | | | | | | | | context_type is an integer mapping of pdptype: 1: IPV4 2: IPV6 3: IPV4V6 Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
* comgt: support ZTE MF286R modemCezary Jackiewicz2022-04-162-1/+23
| | | | | | | | | | | | The modem is based on Marvell PXA1826 and uses ACM+RNDIS interface to establish connection with custom commands specific to ZTE modems. Two variants of modems were discovered, some identifying themselves as "ZTE", and others as plain "Marvell", the chipset manufacturer. The modem itself runs a fork of OpenWrt inside, which root shell can be accessed via ADB interface. Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* comgt: ncm: try to detect interface for ttyACM portsLech Perczak2022-04-161-0/+4
| | | | | | | | | | | Some modems expose ttyACM as their control ports, which have the "device" symlink pointing one level down in sysfs tree. Try to find network interfaces for them as well, this is commonly used for modems exposing ACM + RNDIS or ACM + ECM interface combinations. Co-developed-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* comgt: ncm: select first available network interface for deviceLech Perczak2022-04-161-3/+4
| | | | | | | | | | | | | Some modems expose multiple network interfaces on the same USB device, causing the connection setup script to fail, because glob matching in the detection phase causes 'ls' to output more than one interface name plus their base directories in sysfs. Avoid that by listing the directories explicitly and then selecting first available interface. This is the case for some variants of ZTE MF286R built-in modem, which exposes both RNDIS and CDC-ECM network interfaces, causing the connection setup to fail. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* comgt: ncm: allow specification of interface nameLech Perczak2022-04-161-14/+18
| | | | | | | | | | | | Add ifname property to UCI, which can be used to override the autodetected interface name in case the detection fails due to having none or more than one interface exposed by the modem, which is not explicitly linked to TTY port. This is needed on certain variants of ZTE MF286R built-in modem, which exposes both RNDIS and CDC-ECM interfaces on the modem, on which the automatic detection may select the wrong network interface. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* package/comgt: Handle bind/unbind eventsArjun AK2021-07-021-0/+2
| | | | | | | | | | | | | This script was expecting only add/remove events which has not been the case since Kernel 4.12 (which added bind/unbind). Bind events were getting treated as remove events which would cause hotplugged 3g modems to not work. More info: https://lkml.org/lkml/2018/12/23/128 https://github.com/systemd/systemd/issues/8221 Signed-off-by: Arjun AK <arjunak234@gmail.com>
* comgt: add new script to send ussd request and get the answerKirill Lukonin2020-07-081-0/+21
| | | | | | | | | | | New script for comgt. Should help to fetch balance or any additional information with USSD. This script uses the standard AT command which should be supported by all modems. Run-tested on: Mikrotik wAP LTE KIT Signed-off-by: Kirill Lukonin <klukonin@gmail.com> [fixed from/sob] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* comgt-ncm: do not attempt to connect if the control device is invalidRozhuk Ivan2020-06-171-16/+46
| | | | | | | | | | | | | | | | | | | | | | After a hardware reconnect, the control device might be unavailable and attempting to interact with it will lead to hanging gcom calls, leaving the protocol setup in an unrecoverable state. Change the protocol handler to bail out early and notify netifd if the control device is not defined or if the underlying device node does not exist. Also ensure that the "disconnect", "connect" and "setmode" commands are actually defined before trying to invoke them. Finally attempt to re-query the device manufacturer if it is unset in the interface state in order to prevent UNUPPORTED_MODEM errors after a modem hardware reconnect. Signed-off-by: Rozhuk Ivan <rozhuk.im@gmail.com> [reword subject and commit message] Ref: https://github.com/openwrt/openwrt/pull/2352 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* comgt: replace backticks by $(...)Adrian Schmutzler2020-05-131-2/+2
| | | | | | This replaces deprecated backticks by more versatile $(...) syntax. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* comgt: fix hotplug event handlingRozhuk Ivan2020-03-162-5/+5
| | | | | | | | | Hotplug manager send: "remove" -> "add" -> "bind" events, script interpret bind as "not add" = "remove" and mark device as unavailable. Signed-off-by: Rozhuk Ivan <rozhuk.im@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* comgt-ncm: add driver dependencies againVincent Wiemann2019-08-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | In the commit 623716dd4318 ("comgt-ncm: Fix NCM protocol") the dependencies to vendor NCM drivers were removed, because: > comgt-ncm should not depend on the USB-serial-related kernel modules, > as the cdc-wdm control device works without them. There is also no need > to depend on kmod-huawei-cdc-ncm, since other manufacturers (like > Ericsson and Samsung) which use other kernel modules should also be > supported. From a user-perspective this does not make sense, as installing comgt-ncm (or luci-proto-ncm) should install all needed dependencies for using such a device. Furthermore depending on kmod-huawei-cdc-ncm does not mean that Ericsson and Samsung devices can't be supported. By the way it seems that Ericsson and Samsung devices never used NCM, but act as serial modems. Thus this commit adds the dependencies again. Signed-off-by: Vincent Wiemann <vincent.wiemann@ironai.com> [fixed title capitalization, formatted commit message, renamed Sony-Ericsson to Ericsson] Signed-off-by: David Bauer <mail@david-bauer.net>
* comgt: add delay option for 3g protoFlorian Eckert2019-07-031-0/+4
| | | | | | | All protos for wwan (ncm,qmi,mbim) do have a delay option. To standardize that add also the missing delay option to the 3g proto. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* uqmi: inherit firewall zone membership to virtual sub interfacesJo-Philipp Wich2019-03-051-0/+10
| | | | | | | | | Fix an issue where subinterfaces were not added to the same firewall zone as their parent. Fixes: FS#2122 Signed-off-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* comgt: Fix 3g.sh permissionsRosen Penev2018-12-061-2/+2
| | | | | | 3g.sh needs to be executable. 600 is not correct for that. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* comgt: Install hotplug and netifd files as 600Rosen Penev2018-10-111-3/+3
| | | | | | procd and netifd both run as root. These files are not used elsewhere. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* comgt: increase timeout on runcommandsGiuseppe Lippolis2018-08-291-1/+1
| | | | | | | | | Some combination of modem/wireless operator requires more time to execute the commands. Tested on DWR-512 embedded wwan modem and italian operator iliad (new virtual operator). Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
* treewide: fix shellscript syntax errors/typosLorenzo Santina2017-09-133-4/+3
| | | | | | | | | Fix multiple syntax errors in shelscripts (of packages only) These errors were causing many conditions to not working properly Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> [increase PKG_RELEASE, drop command substitution from directip.sh] Signed-off-by: Mathias Kresin <dev@kresin.em>
* DWR-512: adding wwan support for the dwr-512 3G modemGiuseppe Lippolis2017-05-252-2/+36
| | | | | | | | | This PR allow the 3G modem embedded in the DWR-512 to be managed by the wwan-ncm scripts. The modem will use the usb-option and usb-cdc-ether drivers. The DWR-512 DT is updated accordingly. Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
* comgt-3g: enable modem before to setpinGiuseppe Lippolis2017-05-182-1/+2
| | | | | | some modems needs to be enabled with CFUN=1 before to set the pin Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
* comgt: mark as nonshared because of the usb dependenciesFelix Fietkau2017-01-131-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Revert the recent dependency and metadata scanning reworkFelix Fietkau2017-01-111-1/+1
| | | | | | | | | | | | | | | This reverts the following commits: fbe522d1204149b6c128d55e360bfc15fa8258e1 278ad007ee03c4455c3507322e34b0e3e6ec050d 863888e44f7a1fb1675a2e7a2eaabfec3561d2a2 96daf6352f6e04bc22789466cb5409b93fbec191 cfd83555fc4f0bab18a26f6812da18e64df46ff3 This seems to trigger some mconf bugs when built with all feeds packages, so I will try to find a less intrusive solution before the release. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* comgt: allow build without USB_SUPPORTFelix Fietkau2017-01-111-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* comgt-ncm: fix typo Fix typo in ncm.sh. Resolves:Cezary Jackiewicz2016-12-221-1/+1
| | | | | | Wed Dec 21 09:55:54 2016 daemon.notice netifd: wan (4455): ./ncm.sh: eval: line 1: =IP: not found Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* comgt: add support of using device symlinks.Nickolay Ledovskikh2016-12-203-0/+5
| | | | | | | It's useful when using multiple usb devices that should be bound to certain usb ports. Symlinks are created by hotplug handlers. Signed-off-by: Nickolay Ledovskikh <nledovskikh@gmail.com>
* treewide: clean up download hashesFelix Fietkau2016-12-161-1/+1
| | | | | | Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* comgt-ncm: Add support for specifying profile indexMatti Laakso2016-12-144-56/+51
| | | | | | | | | | | | | | | Add support for specifying a call profile index instead of APN. A specific index different from 1 must be used for some service provider and modem combinations. In addition, change the manufacturer detection to use the standard AT+CGMI command, which produces more predictable output than ATI, remove the redundant ipv6 option, since it is less ambiguous to directly specify the PDP context type with mobile connections, and fix missing device during teardown when using ncm through the wwan proto. Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
* comgt: move to WWAN submenu, fixed linkAlberto Bursi2016-11-081-3/+4
| | | | | | | | moving comgt and its modules to WWAN submenu to join uqmi as both are tools for WWAN modems. I replaced the link with comgt's ubuntu manpage because the old link isn't working anymore. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* gcom: Fix 'mode' option for ncmCezary Jackiewicz2016-11-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For Huawei devices like E3372 proper command for set lte mode is: AT^SYSCFGEX="03",3fffffff,2,4,7fffffffffffffff,, Eval is required for proper quotation. Without this fix: Fri Nov 4 19:07:49 2016 daemon.notice netifd: Interface 'wan' is setting up now Fri Nov 4 19:07:52 2016 daemon.notice netifd: wan (2060): sending -> AT Fri Nov 4 19:07:52 2016 daemon.notice netifd: wan (2060): sending -> ATZ Fri Nov 4 19:07:53 2016 daemon.notice netifd: wan (2060): sending -> ATQ0 Fri Nov 4 19:07:53 2016 daemon.notice netifd: wan (2060): sending -> ATV1 Fri Nov 4 19:07:54 2016 daemon.notice netifd: wan (2060): sending -> ATE1 Fri Nov 4 19:07:55 2016 daemon.notice netifd: wan (2060): sending -> ATS0=0 Fri Nov 4 19:07:55 2016 daemon.notice netifd: wan (2060): sending -> AT+CGDCONT=1,"IP","internet" Fri Nov 4 19:07:57 2016 daemon.notice netifd: wan (2060): sending -> AT^SYSCFGEX=\"03\",3fffffff,2,4,7fffffffffffffff,, Fri Nov 4 19:07:58 2016 daemon.notice netifd: wan (2060): Error running AT-command Fri Nov 4 19:07:58 2016 daemon.notice netifd: wan (2060): Failed to set operating mode Fri Nov 4 19:07:58 2016 daemon.notice netifd: wan (2092): Stopping network ... With this fix: Fri Nov 4 19:10:59 2016 daemon.notice netifd: Interface 'wan' is setting up now Fri Nov 4 19:11:01 2016 daemon.notice netifd: wan (2539): sending -> AT Fri Nov 4 19:11:01 2016 daemon.notice netifd: wan (2539): sending -> ATZ Fri Nov 4 19:11:02 2016 daemon.notice netifd: wan (2539): sending -> ATQ0 Fri Nov 4 19:11:03 2016 daemon.notice netifd: wan (2539): sending -> ATV1 Fri Nov 4 19:11:03 2016 daemon.notice netifd: wan (2539): sending -> ATE1 Fri Nov 4 19:11:04 2016 daemon.notice netifd: wan (2539): sending -> ATS0=0 Fri Nov 4 19:11:05 2016 daemon.notice netifd: wan (2539): sending -> AT+CGDCONT=1,"IP","internet" Fri Nov 4 19:11:06 2016 daemon.notice netifd: wan (2539): sending -> AT^SYSCFGEX="03",3fffffff,2,4,7fffffffffffffff,, Fri Nov 4 19:11:07 2016 daemon.notice netifd: wan (2539): sending -> AT^NDISDUP=1,1,"internet" Fri Nov 4 19:11:08 2016 daemon.notice netifd: wan (2539): Connected, starting DHCP on wwan0 Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan' is now up Fri Nov 4 19:11:08 2016 daemon.notice netifd: Network device 'wwan0' link is up Fri Nov 4 19:11:08 2016 daemon.notice netifd: Network alias 'wwan0' link is up Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' is enabled Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' has link connectivity Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' is setting up now ... Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* comgt: add metric, defaultroute and peerdns options for directip protocolMarcin Jurkowski2016-10-261-2/+5
| | | | | | | | | | Adds generic network options for directip protocol dynamic interfaces as suggested by Felix in https://lists.openwrt.org/pipermail/openwrt-devel/2016-February/039794.html. This depends on netifd patch https://patchwork.ozlabs.org/patch/686820/. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
* comgt: add metric, defaultroute and peerdns options for ncm protocolMarcin Jurkowski2016-10-261-2/+5
| | | | | | | | | | Adds generic network options for ncm protocol dynamic interfaces as suggested by Felix in http://lists.openwrt.org/pipermail/openwrt-devel/2016-February/039794.html. This depends on netifd patch https://patchwork.ozlabs.org/patch/686820/. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
* treewide: replace nbd@openwrt.org with nbd@nbd.nameFelix Fietkau2016-06-071-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ppp: use more reliable way to set script environmentSteven Barth2015-09-152-4/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46942
* comgt-ncm: Add possibility to choose PDP context typeSteven Barth2015-09-113-14/+50
| | | | | | | | | | | | | | | | | By setting the option pdptype to IP, IPV6 or IPV4V6 the user can choose the context type between IPv4, IPv6 and dual stack, respectively. The default setting is dual stack, except if option ipv6=0 is specified, in which case IPv4 context is the default. This allows for an out-of-the-box IPv6 support with modems utilizing NCM-like protocols. While we are at it, also add commands for Sierra DirectIP modems (currently untested), which will allow us to drop the separate comgt-directip package (once tested and verified working). Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 46844
* comgt/umbim/uqmi: enable RFC 7278 for 3g/4g by defaultSteven Barth2015-09-033-0/+5
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46780
* comgt: make ncm proto work via wwan protoJohn Crispin2015-07-081-0/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 46272
* comgt: the package contained too many filesJohn Crispin2015-05-231-1/+0
| | | | | | | | fixes #19698 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45741
* network: also shorten virtual interface names of ppp and 3g/4g connectionsSteven Barth2015-04-172-4/+4
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45479
* packages: use $(LN) macro, make symlinks relativeNicolas Thill2015-04-031-1/+1
| | | | | | Signed-off-by: Nicolas Thill <nico@openwrt.org> SVN-Revision: 45250
* ncm, qmi, mbim: Add dependency on wwan packageJohn Crispin2015-03-091-1/+1
| | | | | | | | | | The wwan package holds the hotplug script to set mobile broadband interfaces (un)available. Add it as a dependency to comgt-ncm, uqmi and umbim. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 44631
* ncm: Remove unnecessary proto_set_available commandsJohn Crispin2015-03-091-5/+0
| | | | | | | | | Interface should not be set unavailable in all error cases, returning 1 is enough. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 44630
* comgt, wwan: Move USB data files to wwan packageJohn Crispin2015-03-09348-1739/+0
| | | | | | | | | USB modem data files should be a part of the wwan package, which actually uses them unlike comgt. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 44628
* comgt: Use TCGETS and TCSETS ioctls for struct termiosJohn Crispin2015-02-223-14/+90
| | | | | | | | | | When passing struct termios to ioctl TCGETS and TCSETS should be used instead of TCGETA and TCSETA, which are meant for the older struct termio. Should fix https://dev.openwrt.org/ticket/19012 Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 44506
* comgt-ncm: Fix NCM protocolJohn Crispin2015-01-284-36/+61
| | | | | | | | | | | | | | | | | | | This patch fixes the NCM protocol by adding the missing ifname to the netifd script and changing one unintended "send" statement to "print" in runcommand.gcom. It also cleans up logging and makes the manufacturer names case-insensitive. Furthermore, comgt-ncm should not depend on the USB-serial-related kernel modules, as the cdc-wdm control device works without them. There is also no need to depend on kmod-huawei-cdc-ncm, since other manufacturers (like Sony-Ericsson and Samsung) which use other kernel modules should also be supported. I'd appreciate if someone with Samsung or Sony-Ericsson modems could test this, I was only able to test it with Huawei E3276, E3372 and E353. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 44182
* comgt: Allow using non-TTY devicesJohn Crispin2015-01-201-0/+68
| | | | | | | | | | | | | Some Huawei mobile broadband sticks utilizing the NCM protocol expose the control channel as a cdc-wdm device node instead of a virtual TTY. This device node does not support the terminal ioctls. This patch adds a check whether the provided device is a TTY or not and does not attempt to use the terminal ioctls if they are not supported. v2: reduce diffstat by simplifying code a little Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 44054
* license info - revert r43155John Crispin2014-11-031-3/+0
| | | | | | | | turns out that r43155 adds duplicate info. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43167
* Add more license tags with SPDX identifiersJohn Crispin2014-11-031-0/+3
| | | | | | | | | | | | | | | | | | Note, that licensing stuff is a nightmare: many packages does not clearly state their licenses, and often multiple source files are simply copied together - each with different licensing information in the file headers. I tried hard to ensure, that the license information extracted into the OpenWRT's makefiles fit the "spirit" of the packages, e.g. such small packages which come without a dedicated source archive "inherites" the OpenWRT's own license in my opinion. However, I can not garantee that I always picked the correct information and/or did not miss license information. Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 43155
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-22 23:28:57 +0000