aboutsummaryrefslogtreecommitdiffstats
path: root/package/network/services/hostapd
Commit message (Collapse)AuthorAgeFilesLines
* hostapd: refresh patchesChristian Marangi2023-11-094-10/+10
| | | | | | | Refresh patches for hostapd using make package/hostapd/refresh. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 05e516b12d4463e40df6d97a03bc6aa621c245f5)
* hostapd: permit 40MHz in 802.1s only also for 2.4GHz g/n with noscanChristian Marangi2023-11-091-0/+9
| | | | | | | | | | | | | | Currently for 802.1s only, for wifi 2.4GHz in g/n mode, 40MHz is never permitted. This is probably due to the complexity of setting periodic check for the intolerant bit. When noscan option is set, we ignore the presence of the intoleran bit in near AP, so we can enable 40MHz and ignore any complex logic for checking. Fixes: #13112 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 6c9ac57d58ab0d2c71fb51120a2166b7e0bd7183)
* hostapd: permit also channel 7 for 2.5GHz to be set to HT40PLUSChristian Marangi2023-11-091-1/+1
| | | | | | | | Also channel 7 for 2.4GHz can be set to HT40PLUS. Permit this and add it to the list of the channels. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit b1c7b1bd67ca40289dfb7acd03e12ce43618d548)
* hostapd: fix broke noscan option for meshChristian Marangi2023-11-092-3/+3
| | | | | | | | | | noscan option for mesh was broken and actually never applied. This is caused by a typo where ssid->noscan value is check instead of conf->noscan resulting in the logic swapped and broken. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 1b5ea2e199fcf391f88afd0322de449459399be4)
* hostapd: use rtnl to set up interfacesFelix Fietkau2023-11-083-5/+11
| | | | | | | In wpa_supplicant, set up wlan interfaces before adding them Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit c2a30b6e01aa756cd7d50c578ab4344c725ecc59)
* wifi: fix applying mesh parameters when wpa_supplicant is in useFelix Fietkau2023-11-083-26/+71
| | | | | | | | Apply them directly using nl80211 after setting up the interface. Use the same method in wdev.uc as well Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 531314260d2e50e984e1671f88662b469dffb16e)
* hostapd: fix broken WPS on broadcom-wl and ath11kPetr Štetiar2023-11-021-0/+62
| | | | | | | | | | | | | | | | | | | | | Upgrading wpa_supplicant from 2.9 to 2.10 breaks broadcom-wl/ath11k based adapters. The reason for it is hostapd tries to install additional IEs for scanning while the driver does not support this. The kernel indicates the maximum number of bytes for additional scan IEs using the NL80211_ATTR_MAX_SCAN_IE_LEN attribute. Save this value and only add additional scan IEs in case the driver can accommodate these additional IEs. Bug: http://lists.infradead.org/pipermail/hostap/2022-January/040178.html Bug-Debian: https://bugs.debian.org/1004524 Bug-ArchLinux: https://bugs.archlinux.org/task/73495 Upstream-Status: Changes Requested [https://patchwork.ozlabs.org/project/hostap/patch/20220130192200.10883-1-mail@david-bauer.net] Reported-by: Étienne Morice <neon.emorice@mail.com> Tested-by: Étienne Morice <neon.emorice@mail.com> Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 6dca88aa4acd60229147628cb920d05a1136666d)
* hostapd: fix OWE association with mbedtlsDavid Bauer2023-10-312-1/+92
| | | | | | | | | | | | | | | | | The code for hostapd-mbedtls did not work when used for OWE association. When handling association requests, the buffer offsets and length assumptions were incorrect, leading to never calculating the y point, thus denying association. Also when crafting the association response, the buffer contained the trailing key-type. Fix up both issues to adhere to the specification and make hostapd-mbedtls work with the OWE security type. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 39341f422f895a37b405b753c3630b1bdc9b8c6e)
* hostapd: do not trim trailing whitespace, except for newlineFelix Fietkau2023-10-311-2/+2
| | | | | | | Fixes adding SSID or key with trailing whitespace Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit a2d8226c4f45555f49542d6f047b70d44f23f7ec)
* hostapd: increase PKG_RELEASE to fix buildsNick Hainke2023-09-291-1/+1
| | | | | | | | Recent hostapd changes just edited the ucode files. It is required to bump the PKG_RELEASE to include the newest changes in the latest builds. Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 91d2ead3c3bf75b279f861ad5d11b64bf31478f0)
* hostapd: fix wpa_supplicant mac address allocation on ap+staFelix Fietkau2023-09-281-9/+10
| | | | | | | | | | | | If the full interface is restarted while bringing up an AP, it can trigger a wpa_supplicant interface start before wpa_supplicant is notified of the allocated mac addresses. Fix this by moving the iface_update_supplicant_macaddr call to just after the point where mac addresses are allocated. Reported-by: Michael-cy Lee (李峻宇) <Michael-cy.Lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit abceef120d57bf066941882630a76788eb4985a9)
* hostapd: fix mac address of interfaces created via wdev.ucFelix Fietkau2023-09-271-1/+1
| | | | | | | Use the wdev config with the generated MAC address Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 0c43a48735959245f18d79a6e908d3b45cff0a94)
* hostapd: fix rare crash with AP+STA and ACS enabledFelix Fietkau2023-09-271-13/+14
| | | | | | | | Ensure that the iface disable in uc_hostapd_iface_start also clears the ACS state. Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit f1bb528ae7631c60b95499b7e8a1948c3e6a42f0)
* hostapd: fix patch rebase after a crash fixFelix Fietkau2023-09-221-5/+5
| | | | | | | | | The patch refresh accidentally moved the hostapd_ucode_free_iface call to the wrong function Fixes: e9722aef9e84 ("hostapd: fix a crash when disabling an interface during channel list update") Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 3a5ad6e3d74da713c0fc7d63b8026a56d16e198b)
* hostapd: fix wpa_supplicant bringup with non-nl80211 driversFelix Fietkau2023-09-221-0/+17
| | | | | | | Needed for wired 802.1x Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit fd6d7aafb2c3d335a3d192c308ffdace8d292e9f)
* hostapd: add missing NULL pointer check in uc_hostapd_iface_stopFelix Fietkau2023-09-201-0/+3
| | | | | | | Avoid crashing if the interface has already been removed Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 4145ff4d8a29c1c7a1569bb06fa4d1fe9808c94f)
* hostapd: fix a crash when disabling an interface during channel list updateFelix Fietkau2023-09-202-4/+32
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit e9722aef9e84110331706f74f7de0942c8d657ed)
* hostapd: use phy name for hostapd interfaces instead of first-bss ifnameFelix Fietkau2023-09-193-9/+21
| | | | | | | Improves reliability in error handling Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit a511480368a03f754aa6ce7887633247a07ea166)
* hostapd: select libopenssl-legacy for openssl variantsFelix Fietkau2023-09-181-7/+8
| | | | | | | Without it, a lot of authentication modes fail without obvious error messages Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 560965d5826626e3be8c1f1db194db43cc7002cf)
* hostapd: remove eap-eap192 auth type valueFelix Fietkau2023-09-181-12/+4
| | | | | | | It is no longer used Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit b0501d380f65ae9f82173b35b820c9c6adb92493)
* hostapd: support eap-eap2 and eap2 auth_type valuesFelix Fietkau2023-09-181-7/+15
| | | | | | | | WPA3 Enterprise-transitional requires optional MFP support and SHA1+SHA256 WPA3 Enterprise-only requires SHA1 support disabled and mandatory MFP. Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit b63df6ce5d0639e6106967fd445c96518da52afb)
* hostapd: fix FILS key mgmt type for WPA3 Enterprise 192 bitFelix Fietkau2023-09-181-0/+4
| | | | | | | Use the SHA384 variant to account for longer keys with more security Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit f0d1349b52983400e7526f3ab57dc6a0f2cc771a)
* hostapd: backport from master, including ucode based reload supportFelix Fietkau2023-09-1865-1474/+5265
| | | | | | | This significantly improves config reload behavior and also fixes some corner cases related to running AP + mesh interfaces at the same time. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: revert upstream commit to fix #13156Stijn Tintel2023-08-191-0/+63
| | | | | | | | | | | | | Commit e978072baaca ("Do prune_association only after the STA is authorized") causes issues when an STA roams from one interface to another interface on the same PHY. The mt7915 driver is not able to handle this properly. While the commits fixes a DoS, there are other devices and drivers with the same limitation, so revert to the orginal behavior for now, until we have a better solution in place. Fixes: #13156 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 324673914d42f5fb9b70cc73e955117828b99f3b)
* hostapd: add fix for dealing with VHT 160 MHz via ext nss bwFelix Fietkau2023-08-1511-15/+156
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit adfeda849198b33ffa7a7ef233ae8a4df22bbc2d)
* hostapd: update to 2023-06-22Andre Heider2023-07-2032-202/+162
| | | | | | | | | | | | | | | Removed, merged upstream: - 170-wpa_supplicant-fix-compiling-without-IEEE8021X_EAPOL.patch Manually refreshed: - 040-mesh-allow-processing-authentication-frames-in-block.patch - 600-ubus_support.patch - 761-shared_das_port.patch Fixes: #12661 Fixes: 304423a4 ("hostapd: update to 2023-03-29") Signed-off-by: Andre Heider <a.heider@gmail.com> (cherry picked from commit cd804c1ebb34c9740f8ad9fe393a81f3efb7b009)
* treewide: replace AUTORELEASE with real PKG_RELEASETianling Shen2023-05-181-1/+1
| | | | | | | | | | | | | | | | | | Based on Paul Fertser <fercerpav@gmail.com>'s guidance: Change AUTORELEASE in rules.mk to: ``` AUTORELEASE = $(if $(DUMP),0,$(shell sed -i "s/\$$(AUTORELEASE)/$(call commitcount,1)/" $(CURDIR)/Makefile)) ``` then update all affected packages by: ``` for i in $(git grep -l PKG_RELEASE:=.*AUTORELEASE | sed 's^.*/\([^/]*\)/Makefile^\1^';); do make package/$i/clean done ``` Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* hostapd: update to 2023-03-29Nick Hainke2023-04-2254-587/+504
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add patches: - 170-wpa_supplicant-fix-compiling-without-IEEE8021X_EAPOL.patch Remove upstreamed: - 170-DPP-fix-memleak-of-intro.peer_key.patch - 461-driver_nl80211-use-new-parameters-during-ibss-join.patch - 800-acs-don-t-select-indoor-channel-on-outdoor-operation.patch - 992-openssl-include-rsa.patch Automatically refreshed: - 011-mesh-use-deterministic-channel-on-channel-switch.patch - 021-fix-sta-add-after-previous-connection.patch - 022-hostapd-fix-use-of-uninitialized-stack-variables.patch - 030-driver_nl80211-rewrite-neigh-code-to-not-depend-on-l.patch - 040-mesh-allow-processing-authentication-frames-in-block.patch - 050-build_fix.patch - 110-mbedtls-TLS-crypto-option-initial-port.patch - 120-mbedtls-fips186_2_prf.patch - 140-tests-Makefile-make-run-tests-with-CONFIG_TLS.patch - 150-add-NULL-checks-encountered-during-tests-hwsim.patch - 160-dpp_pkex-EC-point-mul-w-value-prime.patch - 200-multicall.patch - 300-noscan.patch - 310-rescan_immediately.patch - 330-nl80211_fix_set_freq.patch - 341-mesh-ctrl-iface-channel-switch.patch - 360-ctrl_iface_reload.patch - 381-hostapd_cli_UNKNOWN-COMMAND.patch - 390-wpa_ie_cap_workaround.patch - 410-limit_debug_messages.patch - 420-indicate-features.patch - 430-hostapd_cli_ifdef.patch - 450-scan_wait.patch - 460-wpa_supplicant-add-new-config-params-to-be-used-with.patch - 463-add-mcast_rate-to-11s.patch - 465-hostapd-config-support-random-BSS-color.patch - 500-lto-jobserver-support.patch - 590-rrm-wnm-statistics.patch - 710-vlan_no_bridge.patch - 720-iface_max_num_sta.patch - 730-ft_iface.patch - 750-qos_map_set_without_interworking.patch - 751-qos_map_ignore_when_unsupported.patch - 760-dynamic_own_ip.patch - 761-shared_das_port.patch - 990-ctrl-make-WNM_AP-functions-dependant-on-CONFIG_AP.patch Manually refresh: - 010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch - 301-mesh-noscan.patch - 340-reload_freq_change.patch - 350-nl80211_del_beacon_bss.patch - 370-ap_sta_support.patch - 380-disable_ctrl_iface_mib.patch - 464-fix-mesh-obss-check.patch - 470-survey_data_fallback.patch - 600-ubus_support.patch - 700-wifi-reload.patch - 711-wds_bridge_force.patch - 740-snoop_iface.patch Tested-by: Packet Please <pktpls@systemli.org> [Fritzbox 4040 (ipq40xx), EAP225-Outdoor (ath79); 802.11s, WPA3 OWE, and WPA3 PSK] Tested-by: Andrew Sim <andrewsimz@gmail.com> [mediatek/filogic] Signed-off-by: Nick Hainke <vincent@systemli.org>
* treewide: add support for "lto" in PKG_BUILD_FLAGSAndre Heider2023-03-211-3/+2
| | | | | | | | | | | | | | | | This reduces open coding and allows to easily add a knob to enable it treewide, where chosen packages can still opt-out via "no-lto". Some packages used LTO, but not the linker plugin. This unifies 'em all to attempt to produce better code. Quoting man gcc(1): "This improves the quality of optimization by exposing more code to the link-time optimizer." Also use -flto=auto instead of -flto=jobserver, as it's not guaranteed that every buildsystem uses +$(MAKE) correctly. Signed-off-by: Andre Heider <a.heider@gmail.com>
* treewide: add support for "gc-sections" in PKG_BUILD_FLAGSAndre Heider2023-03-211-2/+4
| | | | | | | | | | | | | | | This reduces open coding and allows to easily add a knob to enable it treewide, where chosen packages can still opt-out via "no-gc-sections". Note: libnl, mbedtls and opkg only used the CFLAGS part without the LDFLAGS counterpart. That doesn't help at all if the goal is to produce smaller binaries. I consider that an accident, and this fixes it. Note: there are also packages using only the LDFLAGS part. I didn't touch those, as gc might have been disabled via CFLAGS intentionally. Signed-off-by: Andre Heider <a.heider@gmail.com>
* hostapd: enable radius server supportFelix Fietkau2023-03-071-1/+1
| | | | | | This is useful in combination with the built-in eap server support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add missing return code for the bss_mgmt_enable ubus methodFelix Fietkau2023-03-071-0/+2
| | | | | | Fixes bogus errors on ubus calls Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add support for defining multiple acct/auth serversFelix Fietkau2023-03-071-25/+25
| | | | | | | This allows adding backup servers, in case the primary ones fail. Assume that port and shared secret are going to be the same. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: always use sae_password for mesh/SAE authLeon M. Busch-George2023-02-191-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a corner case when using passwords that are exactly 64 characters in length with mesh mode or passwords longer than 63 characters with SAE because 'psk' is used instead of 'sae_password'. SAE is obligatory for 802.11s (mesh point). The 'psk' option for hostapd is suited for WPA2 and enforces length restrictions on passwords. Values of 64 characters are treated as PMKs. With SAE, PMKs are always generated during the handshake and there are no length restrictions. The 'sae_password' option is more suited for SAE and should be used instead. Before this patch, the 'sae_password' option is only used with mesh mode passwords that are not 64 characters long. As a consequence: - mesh passwords can't be 64 characters in length - SAE only works with passwords with lengths >8 and <=63 (due to psk limitation). Fix this by always using 'sae_password' with SAE/mesh and applying the PMK differentiation only when PSK is used. Fixes: #11324 Signed-off-by: Leon M. Busch-George <leon@georgemail.eu> [ improve commit description ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* hostapd: add quotes in assignmentsLeon M. Busch-George2023-02-191-6/+6
| | | | | | It's generally advised to use quotes for variable assignments in bash. Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
* treewide: Trigger reinstall of all wolfssl dependenciesHauke Mehrtens2023-01-011-1/+1
| | | | | | | | The ABI of the wolfssl library changed a bit between version 5.5.3 and 5.5.4. This release update will trigger a rebuild of all packages which are using wolfssl to make sure they are adapted to the new ABI. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tree-wide: Do not use package librt and libpthreadHauke Mehrtens2022-12-291-5/+0
| | | | | | | | | | | The libraries libpthread, libdl, libutil, libanl have been integrated into the libc library in version 2.34. it is not needed to explicitly link them any more. Most of the functions have been moved from the librt.so into libc.so some time ago already. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: allow sharing the incoming DAS port across multiple interfacesFelix Fietkau2022-12-271-0/+298
| | | | | | Use the NAS identifier to find the right receiver context on incoming messages Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add mbedtls variantRosen Penev2022-12-1911-12/+10188
| | | | | | | This adds the current WIP mbedtls patches for hostapd. The motivation here is to reduce size. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* hostapd: enable coredumpsFelix Fietkau2022-12-161-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: always set a default for the nas identifierFelix Fietkau2022-12-161-2/+3
| | | | | | | It is used for both 802.11r and WPA enterprise. Setting it when not needed is harmless Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add support for automatically setting RADIUS own-ip dynamicallyFelix Fietkau2022-12-162-2/+118
| | | | | | Some servers use the NAS-IP-Address attribute as a destination address Signed-off-by: Felix Fietkau <nbd@nbd.name>
* treewide: remove DRIVER_11N_SUPPORTAndre Heider2022-12-133-15/+0
| | | | | | | | | | | | hostapd's compile time option CONFIG_IEEE80211N was removed almost 3 years ago, 80.211n/HT is always included since then. Noticed because `hostapd -v11n` confusingly returned an error. See hostapd's commit: f3bcd69603 "Remove CONFIG_IEEE80211N build option" Signed-off-by: Andre Heider <a.heider@gmail.com>
* hostapd: fix 350-nl80211_del_beacon_bss.patchAndre Heider2022-12-131-1/+1
| | | | | | | | | | | | | | | | | Pass the expected struct: ../src/drivers/driver_nl80211.c: In function 'wpa_driver_nl80211_del_beacon': ../src/drivers/driver_nl80211.c:2945:31: warning: passing argument 1 of 'nl80211_bss_msg' from incompatible pointer type [-Wincompatible-pointer-types] 2945 | msg = nl80211_bss_msg(drv, 0, NL80211_CMD_DEL_BEACON); | ^~~ | | | struct wpa_driver_nl80211_data * ../src/drivers/driver_nl80211.c:695:50: note: expected 'struct i802_bss *' but argument is of type 'struct wpa_driver_nl80211_data *' 695 | struct nl_msg * nl80211_bss_msg(struct i802_bss *bss, int flags, uint8_t cmd) | ~~~~~~~~~~~~~~~~~^~~ Fixes: 35ff1affe8 "hostapd: update to 2022-05-08" Signed-off-by: Andre Heider <a.heider@gmail.com>
* hostapd: remove an unused function from ubus.cAndre Heider2022-12-131-26/+0
| | | | | | | eee80211_frequency_to_channel() isn't used anymore, which is a leftover from: 2a31e9ca97 "hostapd: add op-class to get_status output" Signed-off-by: Andre Heider <a.heider@gmail.com>
* hostapd: use wpa_supplicant for unencrypted mesh connectionsFelix Fietkau2022-12-102-2/+6
| | | | | | It's more reliable than using iw Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: remove invalid dtim_period option processingFelix Fietkau2022-11-101-2/+1
| | | | | | | | dtim_period is a bss property, not a device one. It is already handled properly in mac80211.sh Fixes: 30c64825c7ed ("hostapd: add dtim_period, local_pwr_constraint, spectrum_mgmt_required") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add measurement report value for beacon reportsNick Hainke2022-10-131-0/+1
| | | | | | | | | | | | | | | | | Add the measurement report value to the beacon reports send via ubus. It is possible to derive from the measurement report if a station refused to do a beacon report and why. It is important to know why a station refuses to do a beacon-report. In particular, we should not request a beacon report from a station again that refused a beacon-report before. The rejection reasons can be found by looking at the bits defined by: - MEASUREMENT_REPORT_MODE_ACCEPT - MEASUREMENT_REPORT_MODE_REJECT_LATE - MEASUREMENT_REPORT_MODE_REJECT_INCAPABLE - MEASUREMENT_REPORT_MODE_REJECT_REFUSED Suggested-by: Ian Clowes <clowes_ian@hotmail.com> Signed-off-by: Nick Hainke <vincent@systemli.org>
* treewide: fix security issues by bumping all packages using libwolfsslPetr Štetiar2022-10-031-1/+1
| | | | | | | | | | | | | | | | | As wolfSSL is having hard time maintaining ABI compatibility between releases, we need to manually force rebuild of packages depending on libwolfssl and thus force their upgrade. Otherwise due to the ABI handling we would endup with possibly two libwolfssl libraries in the system, including the patched libwolfssl-5.5.1, but still have vulnerable services running using the vulnerable libwolfssl-5.4.0. So in order to propagate update of libwolfssl to latest stable release done in commit ec8fb542ec3e4 ("wolfssl: fix TLSv1.3 RCE in uhttpd by using 5.5.1-stable (CVE-2022-39173)") which fixes several remotely exploitable vulnerabilities, we need to bump PKG_RELEASE of all packages using wolfSSL library. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* hostapd: add ubus notification on sta authorizedFelix Fietkau2022-09-223-2/+79
| | | | | | | Also include the station auth_type in the ubus and log message in order to detect, if clients used FT or FILS to associate Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2025-07-24 13:06:26 +0000