aboutsummaryrefslogtreecommitdiffstats
path: root/package/network/services/hostapd/patches/600-ubus_support.patch
Commit message (Collapse)AuthorAgeFilesLines
* hostapd: add ubus link-measurements notificationsDavid Bauer2022-04-171-0/+10
| | | | | | | Notify external ubus subscribers of received link-measurement reports. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit f6445cfa1acb32676723c49da3e3158b64a4b3d2)
* hostapd: refresh patchesDavid Bauer2022-02-081-17/+17
| | | | | | Refresh patches after updating to hostapd v2.10. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: refresh patchsetNick Hainke2021-12-311-6/+6
| | | | | | | | | | | | | | Recently the hostapd has undergone many changes. The patches were not refreshed. Refreshed with make package/hostapd/{clean,refresh} Refreshed: - 380-disable_ctrl_iface_mib.patch - 600-ubus_support.patch - 700-wifi-reload.patch - 720-iface_max_num_sta.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* hostapd: provide BSS-transition-queries to ubus subscribersDavid Bauer2021-12-201-3/+13
| | | | | | | | | | | | | | | Provide incoming BSS transition queries to ubus subscribers. This allows external steering daemons to provide clients with an optimal list of transition candidates. This commit has no functional state in case no ubus subscriber is present or it does not handle this ubus message. To prevent hostapd from sending out a generic response by itself, a subscribing daemon has to return a non-zero response code to hostapd. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: enable FILS support in the full config and add build feature discoveryFelix Fietkau2021-12-101-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add a patch that allows processing auth requests for peers in ↵Felix Fietkau2021-11-241-5/+5
| | | | | | | | | | | | | | | blocked state If authentication fails repeatedly e.g. because of a weak signal, the link can end up in blocked state. If one of the nodes tries to establish a link again before it is unblocked on the other side, it will block the link to that other side. The same happens on the other side when it unblocks the link. In that scenario, the link never recovers on its own. To fix this, allow restarting authentication even if the link is in blocked state, but don't initiate the attempt until the blocked period is over. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix use after free bugsDavid Bauer2021-11-191-6/+6
| | | | | | | Using a pointer one lifter after it freed is not the best idea. Let's not do that. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: ubus: fix uninitialized pointerDavid Bauer2021-10-211-1/+1
| | | | | | | This fixes passing a bogus non-null pointer to the ubus handler in case the transition request is rejected. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: fix goto loop for ubus assoc handlerDavid Bauer2021-10-191-8/+7
| | | | | | | | | | When a ubus event handler denies a association with a non-zero return value, the code jumps to preceeding code, creating an endless loop until the event handler accepts the assc request. Move the ubus handler further up the code to avoid creating such a loop. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: ubus: add notification for BSS transition responseDavid Bauer2021-10-131-0/+30
| | | | | | | | | To allow steering daemons to be aware of the STA-decided transition target, publish WNM transition responses to ubus. This way, steerings daemons can learn about STA-chosen targets and send a better selection of transition candidates. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: make it possible to update station airtime weights via ubusFelix Fietkau2021-07-121-0/+41
| | | | | | This allows dynamic tuning based on other runtime information Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix adding back stations after a missed deauth/disassocFelix Fietkau2021-05-261-5/+5
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: update to version 2021-05-21Felix Fietkau2021-05-261-39/+39
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: report radar detected events via ubusFelix Fietkau2021-05-261-0/+11
| | | | | | Events are reported on all BSS interfaces Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add ubus notifications for adding/removing vlan interfacesFelix Fietkau2021-05-181-0/+38
| | | | | | | This can be used to handle network configuration of dynamically created vlan interfaces in a more flexible way Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: update mesh DFS patches and add mesh HE supportDaniel Golle2020-07-301-5/+5
| | | | | | | | | | | | | | | | Drop outdated and by now broken patchset originally supplied by Peter Oh in August 2018 but never merged upstream. Instead add the more promissing rework recently submitted by Markus Theil who picked up Peter's patchset, fixed and completed it and added support for HE (802.11ax) in mesh mode. This is only compile tested and needs some real-life testing. Fixes: FS#3214 Fixes: 167028b750 ("hostapd: Update to version 2.9 (2019-08-08)") Fixes: 0a3ec87a66 ("hostapd: update to latest Git hostap_2_9-1238-gdd2daf0848ed") Fixes: 017320ead3 ("hostapd: bring back mesh patches") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: fix compilation of wpa_supplicantKarel Kočí2020-06-181-4/+4
| | | | | | | | | | | | | Ubus patch as it seems have been broken by some rebase in the past as the location of line that adds ubus object file was in condition for CONFIG_MACSEC. That condition was adding object files that are not touched by ubus patch. This means ubus.o does not have to be included in that case. When it has to be and when build fails is when CONFIG_AP is set. All files included in wpa_supplicant that are touched by this patch are in this condition. This means that this is for sure the original place for it. Signed-off-by: Karel Kočí <karel.koci@nic.cz>
* hostapd: update to latest Git hostap_2_9-1331-g5a8b366233f5Petr Štetiar2020-06-091-17/+17
| | | | | | | | | | | | | Bump to latest Git and refresh all patches in order to get fix for "UPnP SUBSCRIBE misbehavior in hostapd WPS AP" (CVE-2020-12695). General security vulnerability in the way the callback URLs in the UPnP SUBSCRIBE command are used were reported (VU#339275, CVE-2020-12695). Some of the described issues may be applicable to the use of UPnP in WPS AP mode functionality for supporting external registrars. Ref: https://w1.fi/security/2020-1/ Signed-off-by: Petr Štetiar <ynezz@true.cz>
* hostapd: bring back mesh patchesDaniel Golle2020-05-211-23/+23
| | | | | | | | | | | | | Bring back 802.11s mesh features to the level previously available before the recent hostapd version bump. This is mostly to support use of 802.11s on DFS channels, but also making mesh forwarding configurable which is crucial for use of 802.11s MAC with other routing protocols, such as batman-adv, on top. While at it, fix new compiler warning by adapting 700-wifi-reload.patch to upstream changes, now building without any warnings again. Fixes: 0a3ec87a66 ("hostapd: update to latest Git hostap_2_9-1238-gdd2daf0848ed") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: update to latest Git hostap_2_9-1238-gdd2daf0848edPetr Štetiar2020-05-211-60/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bump package to latest upstream Git HEAD which is commit dd2daf0848ed ("HE: Process HE 6 GHz band capab from associating HE STA"). Since last update there was 1238 commits done in the upstream tree with 618 files changed, 53399 insertions, 24928 deletions. I didn't bothered to rebase mesh patches as the changes seems not trivial and I don't have enough knowledge of those parts to do/test that properly, so someone else has to forward port them, ideally upstream them so we don't need to bother anymore. I've just deleted them for now: 004-mesh-use-setup-completion-callback-to-complete-mesh-.patch 005-mesh-update-ssid-frequency-as-pri-sec-channel-switch.patch 006-mesh-inform-kernel-driver-DFS-handler-in-userspace.patch 007-mesh-apply-channel-attributes-before-running-Mesh.patch 011-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch 013-mesh-do-not-allow-pri-sec-channel-switch.patch 015-mesh-do-not-use-offchan-mgmt-tx-on-DFS.patch 016-mesh-fix-channel-switch-error-during-CAC.patch 018-mesh-make-forwarding-configurable.patch Refreshed all other patches, removed upstreamed patches: 051-wpa_supplicant-fix-race-condition-in-mesh-mpm-new-pe.patch 067-0001-AP-Silently-ignore-management-frame-from-unexpected-.patch 070-driver_nl80211-fix-WMM-queue-mapping-for-regulatory-.patch 071-driver_nl80211-fix-regulatory-limits-for-wmm-cwmin-c.patch 090-wolfssl-fix-crypto_bignum_sum.patch 091-0001-wolfssl-Fix-compiler-warnings-on-size_t-printf-forma.patch 091-0002-wolfssl-Fix-crypto_bignum_rand-implementation.patch 091-0003-wolfssl-Do-not-hardcode-include-directory-in-wpa_sup.patch 800-usleep.patch Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ipq8065/NBG6817; ipq40xx/MAP-AC2200] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* hostapd: reduce to a single instance per serviceDaniel Golle2020-04-141-56/+10
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: expose beacon reports through ubusNick Hainke2020-03-301-0/+12
| | | | | | | | | | | | | | | | | | | Subscribe to beacon reports through ubus. Can be used for hearing map and client steering purposes. First enable rrm: ubus call hostapd.wlan0 bss_mgmt_enable '{"beacon_report":True}' Subscribe to the hostapd notifications via ubus. Request beacon report: ubus call hostapd.wlan0 rrm_beacon_req '{"addr":"00:xx:xx:xx:xx:xx", "op_class":0, "channel":1, "duration":1,"mode":2,"bssid":"ff:ff:ff:ff:ff:ff", "ssid":""}' Signed-off-by: Nick Hainke <vincent@systemli.org> [rework identation] Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: add ubus reloadJohn Crispin2019-11-121-2/+125
| | | | | | | | | | | | | | | Add ubus interface to hostapd and wpa_supplicant to allow dynamically reloading wiface configuration without having to restart the hostapd process. As a consequence, both hostapd and wpa_supplicant are now started persistently on boot for each wifi device in the system and then receive ubus calls adding, modifying or removing interface configuration. At a later stage it would be desirable to reduce the services to one single instance managing all radios. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: Remove unneeded patchHauke Mehrtens2019-09-221-2/+2
| | | | | | | All the content of this function is proceeded by IEEE8021X_EAPOL no code accesses the ssid variable outside of this ifdef. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: Update to version 2.9 (2019-08-08)Hauke Mehrtens2019-09-221-24/+24
| | | | | | | | | | | | | | | | | | The size of the ipkgs increase a bit (between 0.7% and 1.1%): old 2019-04-21 (2.8): 288264 wpad-basic_2019-04-21-63962824-1_mipsel_24kc.ipk 256188 wpad-mini_2019-04-21-63962824-1_mipsel_24kc.ipk 427475 wpad-openssl_2019-04-21-63962824-1_mipsel_24kc.ipk 423071 wpad-wolfssl_2019-04-21-63962824-1_mipsel_24kc.ipk new 2019-08-08 (2.9): 290217 wpad-basic_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk 258745 wpad-mini_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk 431732 wpad-openssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk 427641 wpad-wolfssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: Update to version 2.8 (2019-04-21)Hauke Mehrtens2019-09-221-120/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This also syncs the configuration files with the default configuration files, but no extra options are activated or deactivated. The mesh patches were partially merged into hostapd 2.8, the remaining patches were extracted from patchwork and are now applied by OpenWrt. The patches still have open questions which are not fixed by the author. They were taken from this page: https://patchwork.ozlabs.org/project/hostap/list/?series=62725&state=* The changes in 007-mesh-apply-channel-attributes-before-running-Mesh.patch where first applied to hostapd, but later reverted in hostapd commit 3e949655ccc5 because they caused memory leaks. The size of the ipkgs increase a bit (between 1.3% and 2.3%): old 2018-12-02 (2.7): 283337 wpad-basic_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk 252857 wpad-mini_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk 417473 wpad-openssl_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk 415105 wpad-wolfssl_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk new 2019-04-21 (2.8): 288264 wpad-basic_2019-04-21-63962824-1_mipsel_24kc.ipk 256188 wpad-mini_2019-04-21-63962824-1_mipsel_24kc.ipk 427475 wpad-openssl_2019-04-21-63962824-1_mipsel_24kc.ipk 423071 wpad-wolfssl_2019-04-21-63962824-1_mipsel_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* hostapd: Fix AP mode PMF disconnection protection bypassHauke Mehrtens2019-09-211-3/+3
| | | | | | | | This fixes * CVE-2019-16275 AP mode PMF disconnection protection bypass https://w1.fi/security/2019-7/ap-mode-pmf-disconnection-protection-bypass.txt Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: add Multi-AP patches and config optionsArnout Vandecappelle (Essensium/Mind)2019-02-201-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | Cherry-pick Multi-AP commits from uptream: 9c06f0f6a hostapd: Add Multi-AP protocol support 5abc7823b wpa_supplicant: Add Multi-AP backhaul STA support a1debd338 tests: Refactor test_multi_ap bfcdac1c8 Multi-AP: Don't reject backhaul STA on fronthaul BSS cb3c156e7 tests: Update multi_ap_fronthaul_on_ap to match implementation 56a2d788f WPS: Add multi_ap_subelem to wps_build_wfa_ext() 83ebf5586 wpa_supplicant: Support Multi-AP backhaul STA onboarding with WPS 66819b07b hostapd: Support Multi-AP backhaul STA onboarding with WPS 8682f384c hostapd: Add README-MULTI-AP b1daf498a tests: Multi-AP WPS provisioning Add support for Multi-AP to the UCI configuration. Every wifi-iface gets an option 'multi_ap'. For APs, its value can be 0 (multi-AP support disabled), 1 (backhaul AP), 2 (fronthaul AP), or 3 (fronthaul + backhaul AP). For STAs, it can be 0 (not a backhaul STA) or 1 (backhaul STA, can only associate with backhaul AP). Also add new optional parameter to wps_start ubus call of wpa_supplicant to indicate that a Multi-AP backhaul link is required. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* hostapd: update to version 2018-12-02 (2.7)Hauke Mehrtens2019-01-021-29/+29
| | | | | | | | | | This updates hostapd to version the git version from 2018-12-02 which matches the 2.7 release. The removed patches were are already available in the upstream code, one additional backport is needed to fix a compile problem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: add support for WPS pushbutton stationDaniel Golle2018-12-121-0/+82
| | | | | | | | | | | | | | | | | | | | | | similar to hostapd, also add a ubus interface for wpa_supplicant which will allow handling WPS push-button just as it works for hostapd. In order to have wpa_supplicant running without any network configuration (so you can use it to retrieve credentials via WPS), configure wifi-iface in /etc/config/wireless: config wifi-iface 'default_radio0' option device 'radio0' option network 'wwan' option mode 'sta' option encryption 'wps' This section will automatically be edited if credentials have successfully been acquired via WPS. Size difference (mips_24kc): roughly +4kb for the 'full' variants of wpa_supplicant and wpad which do support WPS. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: fix MAC filter related log spamJo-Philipp Wich2018-10-161-10/+10
| | | | | | | | Backport two upstream fixes to address overly verbose logging of MAC ACL rejection messages. Fixes: FS#1468 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* hostapd: add ht and vht support in handle event function Add ht and vht ↵Nick Hainke2018-07-301-2/+3
| | | | | | capabilities. If a device sends a probe request, the capabilities are added. Signed-off-by: Nick Hainke <vincent@systemli.org>
* hostapd: remove unused struct hostapd_ubus_ifaceFelix Fietkau2018-07-221-10/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: update packaging and patchesDaniel Golle2018-05-311-10/+10
| | | | | | | | | | Clean up conflicts/provides/depends hell and add PROVIDES for eapol-test variants while at it. Update mesh-DFS patchset from Peter Oh to v5 (with local fixes) which allows to drop two revert-patches for upstream commits which previously were necessary to un-break mesh-DFS support. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: update to git HEAD of 2018-05-21, allow build against wolfsslDaniel Golle2018-05-241-16/+16
| | | | | | | Support for building wpa_supplicant/hostapd against wolfssl has been added upstream recently, add build option to allow users using it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: update to git snapshot of 2018-04-09Daniel Golle2018-04-131-17/+17
| | | | | | | | | And import patchset to allow 802.11s mesh on DFS channels, see also http://lists.infradead.org/pipermail/hostap/2018-April/038418.html Fix sae_password for encryption mesh (sent upstream as well). Also refreshed existing patches and fixed 463-add-mcast_rate-to-11s. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: update to git snapshot of 2018-03-26Daniel Golle2018-03-271-24/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patches were merged upstream: 000-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch replaced by commit 0e3bd7ac6 001-Prevent-reinstallation-of-an-already-in-use-group-ke.patch replaced by commit cb5132bb3 002-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch replaced by commit 87e2db16b 003-Prevent-installation-of-an-all-zero-TK.patch replaced by commit 53bb18cc8 004-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch replaced by commit 0adc9b28b 005-TDLS-Reject-TPK-TK-reconfiguration.patch replaced by commit ff89af96e 006-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch replaced by commit adae51f8b 007-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch replaced by commit 2a9c5217b 008-WPA-Extra-defense-against-PTK-reinstalls-in-4-way-ha.patch replaced by commit a00e946c1 009-Clear-PMK-length-and-check-for-this-when-deriving-PT.patch replaced by commit b488a1294 010-Optional-AP-side-workaround-for-key-reinstallation-a.patch replaced by commit 6f234c1e2 011-Additional-consistentcy-checks-for-PTK-component-len.patch replaced by commit a6ea66530 012-Clear-BSSID-information-in-supplicant-state-machine-.patch replaced by commit c0fe5f125 013-WNM-Ignore-WNM-Sleep-Mode-Request-in-wnm_sleep_mode-.patch replaced by commit 114f2830d Some patches had to be modified to work with changed upstream source: 380-disable_ctrl_iface_mib.patch (adding more ifdef'ery) plus some minor knits needed for other patches to apply which are not worth being explicitely listed here. For SAE key management in mesh mode, use the newly introduce sae_password parameter instead of the psk parameter to also support SAE keys which would fail the checks applied on the psk field (ie. length and such). This fixes compatibility issues for users migrating from authsae. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: return with 80211 codes in handle event functionNick Hainke2018-02-211-13/+27
| | | | | | | | | | | If the auth or assoc request was denied the reason was always WLAN_STATUS_UNSPECIFIED_FAILURE. That's why for example the wpa supplicant was always trying to reconnect to the AP. Now it's possible to give reasoncodes why the auth or assoc was denied. Signed-off-by: Nick Hainke <vincent@systemli.org>
* hostapd: add support for turning on 802.11k/v features via ubusFelix Fietkau2018-02-211-0/+17
| | | | | | | Neighbor reports are enabled implicitly on use, beacon reports and BSS transition management need to be enabled explicitly Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: refresh ubus patchFelix Fietkau2017-11-151-36/+18
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix up ubus supportJohn Crispin2017-10-251-18/+44
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* hostapd: backport extra changes related to KRACKStijn Tintel2017-10-171-1/+1
| | | | | | | | While these changes are not included in the advisory, upstream encourages users to merge them. See http://lists.infradead.org/pipermail/hostap/2017-October/037989.html Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* hostapd: merge fixes for WPA packet number reuse with replayed messages and ↵Felix Fietkau2017-10-161-13/+13
| | | | | | | | | | | | | | | | | | | | | key reinstallation Fixes: - CERT case ID: VU#228519 - CVE-2017-13077 - CVE-2017-13078 - CVE-2017-13079 - CVE-2017-13080 - CVE-2017-13081 - CVE-2017-13082 - CVE-2017-13086 - CVE-2017-13087 - CVE-2017-13088 For more information see: https://w1.fi/security/2017-1/wpa-packet-number-reuse-with-replayed-messages.txt Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: update to version 2017-08-24Koen Vandeputte2017-10-071-36/+34
| | | | | | | | | | | | - Deleted upstreamed patches & parts - Refreshed all Compile tested: full-option package + tools (hostapd + wpa_supplicant) Run-tested: hostapd wpa2 hotspot & wpa_supplicant IBSS link Targets: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* hostapd: add additional ubus notificationsJohn Crispin2017-08-221-2/+47
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* hostapd: fix reload frequency change patchAbhilash Tuse2017-05-031-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When sta is configured, hostapd receives 'stop' and 'update' command from wpa_supplicant. In the update command, hostapd gets sta parameters with which it configures ap. Problem is, with the default wireless configuration: mode:11g freq:2.4GHz channel:1 If sta is connected to 5GHz network, then ap does not work. Ideally with 340-reload_freq_change.patch hostapd should reload the frequency changes and start ap in 5GHz, but ap becomes invisible in the network. This issue can be reproduced with following /etc/config/wireless: config wifi-device radio0 option type mac80211 option channel 1 option hwmode 11g option path 'virtual/uccp420/uccwlan' option htmode 'none' config wifi-iface 'ap' option device 'radio0' option encryption 'none' option mode 'ap' option network 'ap' option ssid 'MyTestNet' option encryption none config wifi-iface 'sta' option device radio0 option network sta option mode sta option ssid TestNet-5G option encryption psk2 option key 12345 This change updates current_mode structure based on configured hw_mode received from wpa_supplicant. Also prepare rates table after frequency selection. Signed-off-by: Abhilash Tuse <Abhilash.Tuse@imgtec.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup, patch refresh]
* hostapd: backport a few upstream fixesFelix Fietkau2017-01-151-2/+2
| | | | | | | | Fixes reassoc issues with WDS mode Fixes reassoc issues in AP mode Fixes IBSS reauthentication issues Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: update to version 2016-12-15Koen Vandeputte2016-12-201-17/+18
| | | | | | | | | | | | | Update to latest upstream HEAD: - Refreshed all - Delete patches and parts which made it upstream Compile tested Full & Mini configs Run-tested Mini config Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [another update, remove broken patch]
* network/services/hostapd: move whole files outside of patches and drop ↵Alexandru Ardelean2016-10-151-620/+0
| | | | | | | | | | Build/Prepare rule in favor of default one This more of a demo for the previous commit that comes with this one, where I added support for copying source from 'src' to the build dir(s). Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* hostapd: update to version 2016-09-05Felix Fietkau2016-09-081-10/+10
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-29 13:55:53 +0000