aboutsummaryrefslogtreecommitdiffstats
path: root/package/network/services/hostapd/files
Commit message (Collapse)AuthorAgeFilesLines
* hostapd: fix variable shadowingDavid Bauer2020-11-171-0/+2
| | | | | | Fixes commit 838b412cb527 ("hostapd: add interworking support") Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: wpas: add missing config symbolsDavid Bauer2020-10-281-2/+2
| | | | | | | | | | | | | | | This adds missing config symbols for interworking as well as Hotspot 2.0 to the wpa_supplicant-full configuration. These symbols were added to the hostapd-full configuration prior to this commit. Without adding them to the wpa_supplicant configuration, building of wpad-full fails. Thanks to Rene for reaching out on IRC. Fixes: commit be9694aaa297 ("hostapd: add UCI support for Hotspot 2.0") Fixes: commit 838b412cb527 ("hostapd: add interworking support") Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: add interworking supportDavid Bauer2020-10-282-1/+79
| | | | | | | | | | | | | | | | | | | | | | | | This adds configuration options to enable interworking for hostapd. All options require iw_enabled to be set to 1 for a given VAP. All IEEE802.11u related settings are supported with exception of the venue information which will be added as separate UCI sections at a later point. The options use the same name as the ones from the hostapd.conf file with a "iw_" prefix added. All UCI configuration options are passed without further modifications to hostapd with exceptions of the following options, whose elements can be provided using UCI lis elements: - iw_roaming_consortium - iw_anqp_elem - iw_nai_realm - iw_domain_name - iw_anqp_3gpp_cell_net Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: add FTM responder supportDavid Bauer2020-10-281-0/+13
| | | | | | | | | | | | | | | This adds support for enabling the FTM responder flag for the APs extended capabilities. On supported hardware, enabling the ftm_responder config key for a given AP will enable the FTM responder bit. FTM support itself is unconditionally implemented in the devices firmware (ath10k 2nd generation with 3.2.1.1 firmware). There's currently no softmac implementation. Also allow to configure LCI and civic location information which can be transmitted to a FTM initiator. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: remove ieee80211v optionDavid Bauer2020-10-281-14/+6
| | | | | | | | | | | | | Remove the ieee80211v option. It previously was required to be enabled in order to use time_advertisement, time_zone, wnm_sleep_mode and bss_transition, however it didn't enable any of these options by default. Remove it, as configuring these options independently is enough. This change does not influence the behavior of any already configured setting. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: make rrm report independent of ieee80211k settingDavid Bauer2020-10-281-5/+4
| | | | | | | | Allow to configure both RRM beacon as well as neighbor reports independently and only enable them by default in case the ieee80211k config option is set. Signed-off-by: David Bauer <mail@david-bauer.net>
* mac80211: add support for specifying a per-device scan listFelix Fietkau2020-09-291-0/+1
| | | | | | | This is useful to bring up multiple client mode interfaces on a single channel much faster without having to scan through a lot of channels Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add support for per-BSS airtime configurationDavid Bauer2020-09-112-3/+13
| | | | | | | | | | | | Add support for per-BSS airtime weight configuration. This allows to set a airtime weight per BSS as well as a ratio limit based on the weight. Support for this feature is only enabled in the full flavors of hostapd. Consult the hostapd.conf documentation (Airtime policy configuration) for more information on the inner workings of the exposed settings. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: add UCI support for Hotspot 2.0Daniel Golle2020-09-081-2/+102
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: recognize option "key" as alias for "auth_secret"Jo-Philipp Wich2020-08-071-1/+1
| | | | | | | | | | | | | | The hostapd configuration logic is supposed to accept "option key" as legacy alias for "option auth_secret". This particular fallback option failed to work though because "key" was not a registered configuration variable. Fix this issue by registering the "key" option as well, similar to the existing "server" nad "port" options. Ref: https://github.com/openwrt/openwrt/pull/3282 Suggested-by: Michael Jones <mike@meshplusplus.com> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* hostapd: make "key" option optional if "wpa_psk_file" is providedJo-Philipp Wich2020-08-071-5/+5
| | | | | | | | | | | | | If an existing "wpa_psk_file" is passed to hostapd, the "key" option may be omitted. While we're at it, also improve the passphrase length checking to ensure that it is either exactly 64 bytes or 8 to 63 bytes. Fixes: FS#2689 Ref: https://github.com/openwrt/openwrt/pull/3283 Suggested-by: Michael Jones <mike@meshplusplus.com> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* hostapd: fix incorrect service nameDavid Bauer2020-07-311-1/+1
| | | | | | | | | | | | | | When retrieving the PID for hostapd and wpa_supplicant via ubus the wrong service name is currently used. This leads to the following error in the log: netifd: radio0 (1409): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process path (/proc/exe) Fixing the service name retrieves the correct PID and therefore the warning won't occur. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: hostapd_set_psk_file: fix defaut value for macJohann Neuhauser2020-06-131-1/+1
| | | | | | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. Bringing up of station vlan fails if the optional mac entry isn't set. The default mac "00:00:00:00:00:00", which should match all stations, is mistakenly set to the non used variable "isolate". This results in a wrong formatted .psk file which has to be "vlan_id mac key". fixes: 5aa2ddd0: hostapd: add support for wifi-station and wifi-vlan sections Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de>
* hostapd: silence rmStijn Tintel2020-06-081-2/+2
| | | | | | | | | | | | When bringing up wifi the first time after boot, these warnings appear: netifd: radio0 (1370): rm: can't remove '/var/run/hostapd-wlan0.psk': No such file or directory netifd: radio0 (1370): rm: can't remove '/var/run/hostapd-wlan0.vlan': No such file or directory Silence them by adding the "-f" option to rm. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
* hostapd: add support for wifi-station and wifi-vlan sectionsJohn Crispin2020-06-041-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for 2 new uci sections. config wifi-vlan # iface is optional. if it is not defined the vlan will apply # to all interfaces option iface default_radio0 option name guest option vid 100 option network guest config wifi-station # iface is optional. if it is not defined the station will apply # to all interfaces option iface default_radio0 # mac is optional. if it is not defined it will be a catch all # for any sta using this key option mac '00:11:22:33:44:55' # vid is optional. if it is not defined, the sta will be part of # the primary iface. option vid 100 option key testtest With this patch applied it is possible to use multiple PSKs on a single BSS. Signed-off-by: John Crispin <john@phrozen.org>
* hostapd: Add disable_vht when using NOHT/HT* modesEnrique Rodríguez Valencia2020-05-281-1/+2
| | | | | | disable_vht parameter needs to be set when using wpa_supplicant NOHT/HT* modes. Signed-off-by: Enrique Rodríguez Valencia <enrique.rodriguez@galgus.net>
* hostapd: reduce to a single instance per serviceDaniel Golle2020-04-143-49/+28
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* wpa_supplicant: disable CONFIG_WRITE functionalityKirill Lukonin2020-04-132-2/+2
| | | | | | | | | CONFIG_WRITE functionality is not used and could be removed. Looks helpful for devices with small flash because wpad is also affected. Little testing shows that about 6 KB could be saved. Signed-off-by: Kirill Lukonin <klukonin@gmail.com>
* hostapd: Add 802.11r support for WPA3-EnterpriseJesus Fernandez Manzano2020-03-301-0/+1
| | | | Signed-off-by: Jesus Fernandez Manzano <jesus.manzano@galgus.net>
* hostapd: start hostapd/wpa_supplicant for all wiphy devicesPiotr Dymacz2020-02-241-1/+1
| | | | | | | | | | | | | | c888e17e06 ("hostapd: manage instances via procd instead of pidfile") added procd support for managing hostapd and wpa_supplicant daemons but at the same time limited wiphy names to 'phy*'. This brings back initial behaviour (introduced in 60fb4c92b6 ("hostapd: add ubus reload") and makes procd manage daemons for any wiphy device found in '/sys/class/ieee80211'. CC: Felix Fietkau <nbd@nbd.name> CC: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* hostapd: remove some bashismsSven Roederer2020-01-261-3/+3
| | | | | | | | | "[[" is a bash extension for test. As the ash-implementation is not fully compatible we drop its usage. Signed-off-by: Sven Roederer <devel-sven@geroedel.de> [remove shebang, slightly facelift commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* hostapd: add support for system cert bundle validationDavid Lam2020-01-161-5/+14
| | | | | | | | | | | | | | Currently, it is very cumbersome for a user to connect to a WPA-Enterprise based network securely because the RADIUS server's CA certificate must first be extracted from the EAPOL handshake using tcpdump or other methods before it can be pinned using the ca_cert(2) fields. To make this process easier and more secure (combined with changes in openwrt/openwrt#2654), this commit adds support for validating against the built-in CA bundle when the ca-bundle package is installed. Related LuCI changes in openwrt/luci#3513. Signed-off-by: David Lam <david@thedavid.net> [bump PKG_RELEASE] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* hostapd: cleanup IBSS-RSNDaniel Golle2020-01-161-5/+1
| | | | | | set noscan also for IBSS and remove redundant/obsolete variable. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: add wpa_strict_rekey supportKyle Copperfield2020-01-151-1/+3
| | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. Rekey GTK on STA disassociate Signed-off-by: Kyle Copperfield <kmcopper@danwin1210.me>
* hostapd: add dtim_period, local_pwr_constraint, spectrum_mgmt_requiredKyle Copperfield2020-01-151-2/+11
| | | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. Allows dtim_period to be configurable, the default is from hostapd. Adds additional regulatory tunables for power constraint and spectrum managment. Signed-off-by: Kyle Copperfield <kmcopper@danwin1210.me>
* hostapd: add support for subject validationDavid Lam2020-01-141-0/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The wpa_supplicant supports certificate subject validation via the subject match(2) and altsubject_match(2) fields. domain_match(2) and domain_suffix_match(2) fields are also supported for advanced matches. This validation is especially important when connecting to access points that use PAP as the Phase 2 authentication type. Without proper validation, the user's password can be transmitted to a rogue access point in plaintext without the user's knowledge. Most organizations already require these attributes to be included to ensure that the connection from the STA and the AP is secure. Includes LuCI changes via openwrt/luci#3444. From the documentation: subject_match - Constraint for server certificate subject. This substring is matched against the subject of the authentication server certificate. If this string is set, the server sertificate is only accepted if it contains this string in the subject. The subject string is in following format: /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as .example.com subject_match2 - Constraint for server certificate subject. This field is like subject_match, but used for phase 2 (inside EAP-TTLS/PEAP/FAST tunnel) authentication. altsubject_match - Constraint for server certificate alt. subject. Semicolon separated string of entries to be matched against the alternative subject name of the authentication server certificate. If this string is set, the server sertificate is only accepted if it contains one of the entries in an alternative subject name extension. altSubjectName string is in following format: TYPE:VALUE Example: EMAIL:server@example.com Example: DNS:server.example.com;DNS:server2.example.com Following types are supported: EMAIL, DNS, URI altsubject_match2 - Constraint for server certificate alt. subject. This field is like altsubject_match, but used for phase 2 (inside EAP-TTLS/PEAP/FAST tunnel) authentication. domain_match - Constraint for server domain name. If set, this FQDN is used as a full match requirement for the server certificate in SubjectAltName dNSName element(s). If a matching dNSName is found, this constraint is met. If no dNSName values are present, this constraint is matched against SubjectName CN using same full match comparison. This behavior is similar to domain_suffix_match, but has the requirement of a full match, i.e., no subdomains or wildcard matches are allowed. Case-insensitive comparison is used, so "Example.com" matches "example.com", but would not match "test.Example.com". More than one match string can be provided by using semicolons to separate the strings (e.g., example.org;example.com). When multiple strings are specified, a match with any one of the values is considered a sufficient match for the certificate, i.e., the conditions are ORed together. domain_match2 - Constraint for server domain name. This field is like domain_match, but used for phase 2 (inside EAP-TTLS/PEAP/FAST tunnel) authentication. domain_suffix_match - Constraint for server domain name. If set, this FQDN is used as a suffix match requirement for the AAA server certificate in SubjectAltName dNSName element(s). If a matching dNSName is found, this constraint is met. If no dNSName values are present, this constraint is matched against SubjectName CN using same suffix match comparison. Suffix match here means that the host/domain name is compared one label at a time starting from the top-level domain and all the labels in domain_suffix_match shall be included in the certificate. The certificate may include additional sub-level labels in addition to the required labels. More than one match string can be provided by using semicolons to separate the strings (e.g., example.org;example.com). When multiple strings are specified, a match with any one of the values is considered a sufficient match for the certificate, i.e., the conditions are ORed together. For example, domain_suffix_match=example.com would match test.example.com but would not match test-example.com. This field is like domain_match, but used for phase 2 (inside EAP-TTLS/PEAP/FAST tunnel) authentication. domain_suffix_match2 - Constraint for server domain name. This field is like domain_suffix_match, but used for phase 2 (inside EAP-TTLS/PEAP/FAST tunnel) authentication. Signed-off-by: David Lam <david@thedavid.net>
* hostapd: disable ft_psk_generate_local for non-PSK networksDavid Bauer2020-01-091-1/+9
| | | | | | | | | | | | Without this commit, ft_psk_generate_local is enabled for non-PSK networks by default. This breaks 802.11r for EAP networks. Disable ft_psk_generate_local by default for non-PSK networks resolves this misbehavior. Reported-by: Martin Weinelt <martin@darmstadt.freifunk.net> Signed-off-by: David Bauer <mail@david-bauer.net> Tested-by: Martin Weinelt <martin@darmstadt.freifunk.net>
* hostapd: re-introduce process trackingDaniel Golle2019-12-081-0/+4
| | | | | | | | | | | Before commit 60fb4c92b6 ("hostapd: add ubus reload") netifd was tracking hostapd/wpa_supplicant and restarting wifi in case of a process crash. Restore this behaviour by tracking the PIDs of hostapd and wpa_supplicant. Also make sure hostapd and/or wpa_supplicant have been started before emmitting ubus calls to them using ubus wait_for. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: manage instances via procd instead of pidfileFelix Fietkau2019-12-081-9/+41
| | | | | | | | Allows graceful restart of crashing hostapd/wpa_supplicant instances Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [daniel@makrotopia.org: attempt to launch only present services]
* hostapd: enable CTRL_IFACE_MIB for hostapd-fullDavid Bauer2019-12-087-0/+35
| | | | | | | | This enables the CTRL_IFACE_MIB symbol for wpad-full and hostapd-full. If it is not enabled, statistic outputs such as "hostapd_cli all_sta" are empty. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: add ubus reloadJohn Crispin2019-11-122-12/+27
| | | | | | | | | | | | | | | Add ubus interface to hostapd and wpa_supplicant to allow dynamically reloading wiface configuration without having to restart the hostapd process. As a consequence, both hostapd and wpa_supplicant are now started persistently on boot for each wifi device in the system and then receive ubus calls adding, modifying or removing interface configuration. At a later stage it would be desirable to reduce the services to one single instance managing all radios. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: enable PMKSA and OK caching for WPA3-PersonalDavid Bauer2019-11-041-1/+8
| | | | | | | | | | | | | This enables PMKSA and opportunistic key caching by default for WPA2/WPA3-Personal, WPA3-Personal and OWE auth types. Otherwise, Apple devices won't connect to the WPA3 network. This should not degrade security, as there's no external authentication provider. Tested with OCEDO Koala and iPhone 7 (iOS 13.1). Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: add IEEE 802.11k supportKyle Copperfield2019-11-021-0/+13
| | | | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. Enables radio resource management to be reported by hostapd to clients. Ref: https://github.com/lede-project/source/pull/1430 Co-developed-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> Signed-off-by: Kyle Copperfield <kmcopper@danwin1210.me>
* hostapd: use getrandom syscallHauke Mehrtens2019-09-227-7/+7
| | | | | | | | hostapd will not use the getrandom() syscall and as a fallback use /dev/random, the syscall is supported since Linux 3.17 and in the musl, glibc and uclibc version used by OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: use config option CONFIG_NO_LINUX_PACKET_SOCKET_WARHauke Mehrtens2019-09-224-4/+4
| | | | | | Instead of patching the workaround away, just use the config option. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: Update to version 2.9 (2019-08-08)Hauke Mehrtens2019-09-227-9/+91
| | | | | | | | | | | | | | | | | | The size of the ipkgs increase a bit (between 0.7% and 1.1%): old 2019-04-21 (2.8): 288264 wpad-basic_2019-04-21-63962824-1_mipsel_24kc.ipk 256188 wpad-mini_2019-04-21-63962824-1_mipsel_24kc.ipk 427475 wpad-openssl_2019-04-21-63962824-1_mipsel_24kc.ipk 423071 wpad-wolfssl_2019-04-21-63962824-1_mipsel_24kc.ipk new 2019-08-08 (2.9): 290217 wpad-basic_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk 258745 wpad-mini_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk 431732 wpad-openssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk 427641 wpad-wolfssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: Update to version 2.8 (2019-04-21)Hauke Mehrtens2019-09-227-63/+111
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This also syncs the configuration files with the default configuration files, but no extra options are activated or deactivated. The mesh patches were partially merged into hostapd 2.8, the remaining patches were extracted from patchwork and are now applied by OpenWrt. The patches still have open questions which are not fixed by the author. They were taken from this page: https://patchwork.ozlabs.org/project/hostap/list/?series=62725&state=* The changes in 007-mesh-apply-channel-attributes-before-running-Mesh.patch where first applied to hostapd, but later reverted in hostapd commit 3e949655ccc5 because they caused memory leaks. The size of the ipkgs increase a bit (between 1.3% and 2.3%): old 2018-12-02 (2.7): 283337 wpad-basic_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk 252857 wpad-mini_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk 417473 wpad-openssl_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk 415105 wpad-wolfssl_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk new 2019-04-21 (2.8): 288264 wpad-basic_2019-04-21-63962824-1_mipsel_24kc.ipk 256188 wpad-mini_2019-04-21-63962824-1_mipsel_24kc.ipk 427475 wpad-openssl_2019-04-21-63962824-1_mipsel_24kc.ipk 423071 wpad-wolfssl_2019-04-21-63962824-1_mipsel_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* hostapd: mirror ieee80211w ap mode defaults in station modeJo-Philipp Wich2019-09-201-0/+9
| | | | | | | | | | | For AP mode, OpenWrt automatically sets ieee80211w to either 1 or 2, depending on whether the encryption is set to sae-mixed, or sae/owe/eap suite-b. Mirror the same defaults for client mode connections, in order to allow an OpenWrt station to associate to an OpenWrt ap with SAE, OWE or Suite-B encryption without the need to manually specify "option ieee80211w" on the station. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* hostapd: fix OWE settings in client modeJo-Philipp Wich2019-09-201-0/+1
| | | | | | | | This changes fixes the generation of the wpa_supplicant client configuration in WPA3 OWE client mode. Instead of incorrectly emitting key_mgmt=NONE, use the proper key_mgmt=OWE setting instead. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* hostapd: add Multi-AP patches and config optionsArnout Vandecappelle (Essensium/Mind)2019-02-202-6/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | Cherry-pick Multi-AP commits from uptream: 9c06f0f6a hostapd: Add Multi-AP protocol support 5abc7823b wpa_supplicant: Add Multi-AP backhaul STA support a1debd338 tests: Refactor test_multi_ap bfcdac1c8 Multi-AP: Don't reject backhaul STA on fronthaul BSS cb3c156e7 tests: Update multi_ap_fronthaul_on_ap to match implementation 56a2d788f WPS: Add multi_ap_subelem to wps_build_wfa_ext() 83ebf5586 wpa_supplicant: Support Multi-AP backhaul STA onboarding with WPS 66819b07b hostapd: Support Multi-AP backhaul STA onboarding with WPS 8682f384c hostapd: Add README-MULTI-AP b1daf498a tests: Multi-AP WPS provisioning Add support for Multi-AP to the UCI configuration. Every wifi-iface gets an option 'multi_ap'. For APs, its value can be 0 (multi-AP support disabled), 1 (backhaul AP), 2 (fronthaul AP), or 3 (fronthaul + backhaul AP). For STAs, it can be 0 (not a backhaul STA) or 1 (backhaul STA, can only associate with backhaul AP). Also add new optional parameter to wps_start ubus call of wpa_supplicant to indicate that a Multi-AP backhaul link is required. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* hostapd: enable CONFIG_DEBUG_SYSLOG for wpa_supplicantFelix Fietkau2019-02-174-8/+8
| | | | | | | It was already enabled for wpad builds and since commit 6a15077e2d7fa the script relies on it. Size impact is minimal (2 kb on MIPS .ipk). Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: send wpa_supplicant logging output to syslogFelix Fietkau2019-02-121-1/+1
| | | | | | Helpful for debugging network connectivity issues Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add support for WPS pushbutton stationDaniel Golle2018-12-126-5/+77
| | | | | | | | | | | | | | | | | | | | | | similar to hostapd, also add a ubus interface for wpa_supplicant which will allow handling WPS push-button just as it works for hostapd. In order to have wpa_supplicant running without any network configuration (so you can use it to retrieve credentials via WPS), configure wifi-iface in /etc/config/wireless: config wifi-iface 'default_radio0' option device 'radio0' option network 'wwan' option mode 'sta' option encryption 'wps' This section will automatically be edited if credentials have successfully been acquired via WPS. Size difference (mips_24kc): roughly +4kb for the 'full' variants of wpa_supplicant and wpad which do support WPS. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: add utf8_ssid flag & enable as defaultKevin Darbyshire-Bryant2018-11-141-2/+4
| | | | | | | | | | | | | SSIDs may contain UTF8 characters but ideally hostapd should be told this is the case so it can advertise the fact. Default enable this option. add uci option utf8_ssid '0'/'1' for disable/enable e.g. config wifi-iface option utf8_ssid '0' Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* hostapd: add basic variantKevin Darbyshire-Bryant2018-10-162-0/+973
| | | | | | | | Add a basic variant which provides WPA-PSK only, 802.11r and 802.11w and is intended to support 11r & 11w (subject to driver support) out of the box. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* hostapd: Add WPA-EAP-SUITE-B-192 (WPA3-Enterprise)Hauke Mehrtens2018-10-141-3/+12
| | | | | | | | | | | | This adds support for the WPA3-Enterprise mode authentication. The settings for the WPA3-Enterpriese mode are defined in WPA3_Specification_v1.0.pdf. This mode also requires ieee80211w and guarantees at least 192 bit of security. This does not increase the ipkg size by a significant size. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: Activate Opportunistic Wireless Encryption (OWE)Hauke Mehrtens2018-10-141-2/+15
| | | | | | | | | | | | | | | | | | OWE is defined in RFC 8110 and provides encryption and forward security for open networks. This is based on the requirements in the Wifi alliance document Opportunistic_Wireless_Encryption_Specification_v1.0_0.pdf The wifi alliance requires ieee80211w for the OWE mode. This also makes it possible to configure the OWE transission mode which allows it operate an open and an OWE BSSID in parallel and the client should only show one network. This increases the ipkg size by 5.800 Bytes. Old: 402.541 Bytes New: 408.341 Bytes Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: Activate Simultaneous Authentication of Equals (SAE)Hauke Mehrtens2018-10-141-7/+36
| | | | | | | | | | | | | | | | | | | | This build the full openssl and wolfssl versions with SAE support which is the main part of WPA3 PSK. This needs elliptic curve cryptography which is only provided by these two external cryptographic libraries and not by the internal implementation. The WPA3_Specification_v1.0.pdf file says that in SAE only mode Protected Management Frames (PMF) is required, in mixed mode with WPA2-PSK PMF should be required for clients using SAE, and optional for clients using WPA2-PSK. The defaults are set now accordingly. This increases the ipkg size by 8.515 Bytes. Old: 394.026 Bytes New: 402.541 Bytes Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: sync config with default configurationHauke Mehrtens2018-10-145-35/+41
| | | | | | | | | This replaces the configuration files with the versions from the hostapd project and the adaptions done by OpenWrt. The resulting binaries should be the same. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* hostapd: add support for client taxonomy in the full configFelix Fietkau2018-06-051-1/+1
| | | | | | | This can be used to fingerprint clients to try to identify the exact model Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-29 10:07:29 +0000