aboutsummaryrefslogtreecommitdiffstats
path: root/package/network/services/dnsmasq/files
Commit message (Collapse)AuthorAgeFilesLines
* dnsmasq: add procd interface index trackingValentyn Datsko2022-04-101-0/+5
| | | | | | | | | | | | | | Problem exist when dnsmasq is exclusively bind to particular interface. After reconfiguring or restarting this interface, its index changes, but dnsmasq uses the old one. When this problem occurs, dnsmasq does not listen on the correct interface so DHCP does not work, and clients do not get an IP address. Procd netdev param can be added to restart dnsmasq when the interface index is changed. Signed-off-by: Valentyn Datsko <valikk.d@gmail.com> [combined into a single &&-connected statement] Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 76f55e3c3f32dea63a385e9b3c8eaed1322089c7)
* dnsmasq: fix ismounted checkOldřich Jedlička2021-11-231-2/+2
| | | | | | | | Fix the return value, shell return codes should be 0 to indicate success (i.e. mount point found), 1 should be failure (i.e. mount point not-found). Fixes: ac4e8aa ("dnsmasq: fix more dnsmasq jail issues") Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
* dnsmasq: add ubus acl to allow calls to hotplug.tftp objectDaniel Golle2021-11-121-0/+3
| | | | | | | | dnsmasq may call hotplug.dhcp, hotplug.neigh and hotplug.tftp. Only the first two callees were listed in the ACL, so add missing hotplug.tftp. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: add match_tag for --dhcp-hostPaul Fertser2021-11-091-3/+8
| | | | | | | | | | | | | | | | | | | A set of tags can be specified for --dhcp-host option to restrict the assignment to the requests which match all the tags. Example usage: config vendorclass option networkid 'udhcp' option vendorclass 'udhcp' config host option mac '*:*:*:*:*:*' list match_tag 'switch.10' list match_tag 'udhcp' option ip '192.168.25.10' Signed-off-by: Paul Fertser <fercerpav@gmail.com>
* dnsmasq: fix jail mount in case of ignore_hosts_dir being setDaniel Golle2021-11-011-3/+2
| | | | | | | | | Commit a2fcd3900c ("dnsmasq: improve init script") broke the existing handling for hosts_dir. Remove the redundant mount again to fix it. Reported-by: Hartmut Birr <e9hack@gmail.com> Fixes: a2fcd3900c ("dnsmasq: improve init script") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: improve init scriptDaniel Golle2021-10-311-1/+4
| | | | | | | | * fix restart in LuCI (inherited umask was to restrictive) * make directory of hosts-file (!= /tmp) accessible in ujail Reported-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: add explicit "set:" for client-matching optionsPaul Fertser2021-10-031-6/+6
| | | | | | | | | Bring the usage in line with the dnsmasq man page and the other options where set: is mandatory. No functional change. Signed-off-by: Paul Fertser <fercerpav@gmail.com>
* dnsmasq: add config option for connmark DNS filteringEtan Kissling2021-09-141-0/+12
| | | | | | | | | This adds uci support to configure connmark based DNS filtering. Signed-off-by: Etan Kissling <etan_kissling@apple.com> (imported from upstream mailing list https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2021q2/015151.html) Signed-off-by: Etan Kissling <etan.kissling@gmail.com>
* dnsmasq: reset EXTRA_MOUNT in the right placeDaniel Golle2021-08-011-2/+2
| | | | | | | | | EXTRA_MOUNT variable should be reset in dnsmasq_start() rather than just once at the beginning of the script. Fixes: ac4e8aa2f8 ("dnsmasq: fix more dnsmasq jail issues") Reported-by: Hartmut Birr <e9hack@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: fix more dnsmasq jail issuesDaniel Golle2021-08-011-10/+26
| | | | | | | | | | | | * remove superflus mounts of /dev/null and /dev/urandom * reset EXTRA_MOUNTS at the beginning of the script * add mount according to ignore_hosts_dir * don't add mount for file which is inside a directory already in the EXTRA_MOUNTS list Fixes: 59c63224e1 ("dnsmasq: rework jail mounts") Reported-by: Hartmut Birr <e9hack@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: rework jail mountsDaniel Golle2021-08-011-1/+7
| | | | | | | | | | | | * split into multiple lines to improve readability * use EXTRA_MOUNT for addnhosts instead of blindly adding /tmp/hosts * remove no longer needed mount for /sbin/hotplug-call * add dhcp-script.sh dependencies (jshn, ubus) Fixes: 3a94c2ca5c ("dnsmasq: add /tmp/hosts/ to jail_mount") Fixes: aed95c4cb8 ("dnsmasq: switch to ubus-based hotplug call") Reported-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: add /tmp/hosts/ to jail_mountNick Hainke2021-07-191-1/+1
| | | | | | | Programs like the olsr-name-plugin write hostname files to "/tmp/hosts/". If you don't add this to the jail_mount, dnsmasq can't read it anymore. Signed-off-by: Nick Hainke <vincent@systemli.org>
* dnsmasq: use local option for local domain parameterKevin Darbyshire-Bryant2021-07-051-1/+1
| | | | | | | | | '--local' is a synonym for '--server' so let's use '--local' in the resultant config file for uci's 'local' instead of uci's local parameter being turned into '--server'. Slightly less confusion all round. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: distinct Ubus names for multiple instancesEtan Kissling2021-06-291-3/+29
| | | | | | | | | | | | | | | | | | | | | | | | Currently, when using multiple dnsmasq instances they are all assigned to the same Ubus instance name. This does not work, as only a single instance can register with Ubus at a time. In the log, this leads to `Cannot add object to UBus: Invalid argument` error messages. Furthermore, upstream 3c93e8eb41952a9c91699386132d6fe83050e9be changes behaviour so that instead of the log, dnsmasq exits at start instead. With this patch, all dnsmasq instances are assigned unique names so that they can register with Ubus concurrently. One of the enabled instances is always assigned the previous default name "dnsmasq" to avoid breaking backwards compatibility with other software relying on that default. Previously, a random instance got assigned that name (while the others produced error logs). Now, the first unnamed dnsmasq config section is assigned the default name. If there are no unnamed dnsmasq sections the first encountered named dnsmasq config section is assigned instead. A similar issue exists for Dbus and was similarly addressed. Signed-off-by: Etan Kissling <etan.kissling@gmail.com> [tweaked commit message] dnsmasq was not crashing it is exiting Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* Revert "dnsmasq: add config option for connmark DNS filtering"Kevin Darbyshire-Bryant2021-06-261-12/+0
| | | | | | | | | This reverts commit dea4bae7c2b963af02e1e3e3bdb5cd656a5ea3d3. dnsmasq v2.86test3 has some issues with ubus and needs reverting, hence this needs reverting. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: add config option for connmark DNS filteringEtan Kissling2021-06-261-0/+12
| | | | | | | | This adds uci support to configure connmark based DNS filtering. Signed-off-by: Etan Kissling <etan_kissling@apple.com> (See https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2021q2/015151.html) Signed-off-by: Etan Kissling <etan.kissling@gmail.com>
* dnsmasq: add ignore hosts dir to dnsmasq init scriptJoão Henriques2021-04-241-1/+6
| | | | | | | | When running multiple instances of dnsmasq, for example one being for the lan and another for a guest network, it might not be desirable to have the same dns names configured in both networks Signed-off-by: João Henriques <joaoh88@gmail.com>
* dnsmasq: switch to ubus-based hotplug callDaniel Golle2021-02-084-37/+45
| | | | | | | | Use new ubus-based hotplug call in dhcp-script.sh As sysntpd now makes use of the new ubus-based hotplug calls, dnsmasq no longer needs to ship ACL to cover ntpd-hotplug. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: 'ipset' config sectionsAleksandr Mezin2020-11-111-0/+27
| | | | | | | | | | | | | | | | | | | | | | | Allow configuring ipsets with dedicated config sections: config ipset list name 'ss_rules_dst_forward' list name 'ss_rules6_dst_forward' list domain 't.me' list domain 'telegram.org' instead of current, rather inconvenient syntax: config dnsmasq ... list ipset '/t.me/telegram.org/ss_rules_dst_forward,ss_rules6_dst_forward' Current syntax will still continue to work though. With this change, a LuCI GUI for DNS ipsets should be easy to implement. Signed-off-by: Aleksandr Mezin <mezin.alexander@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* dnsmasq: explictly set ednspacket_max valueJan Pavlinec2020-11-091-0/+1
| | | | | | | This is related to DNS Flag Day 2020. It sets default ends buffer size value to 1232. Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
* dnsmasq: include IPv6 local nameserver entryJoel Johnson2020-10-261-0/+1
| | | | | | | | | For IPv6 native connections when using IPv6 DNS lookups, there is no valid default resolver if ignoring WAN DHCP provided nameservers. This uses a runtime check to determine if IPv6 is supported on the host. Signed-off-by: Joel Johnson <mrjoel@lixil.net>
* busybox: make username consistentDaniel Golle2020-10-251-1/+1
| | | | | | | | | ntpd in packages feed had already a user 'ntp' with UID 123 declared. Rename the username of busybox-ntpd to be 'ntp' instead of 'ntpd' so it doesn't clash. Reported-by: Etienne Champetier <champetier.etienne@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: adapt to non-root ntpdDaniel Golle2020-10-251-0/+8
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: fix handling ignore condition for dnssecYousong Zhou2020-09-251-0/+1
| | | | | | | | | | It should return false to indicate that the option should not be ignored Fixes 064dc1e8 ("dnsmasq: abort when dnssec requested but not available") Reported-by: Sami Olmari <sami@olmari.fi> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* dnsmasq: support tftp_unique_root in /etc/config/dhcpW. Michael Petullo2020-09-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The TFTP server provided by dnsmasq supports serving a select boot image based on the client's MAC or IP address. This allows an administrator to activate this feature in /etc/config/dhcp. Here is an example /etc/config/dhcp that configures dnsmasq with --tftp-unique-root=mac: ... config dnsmasq option enable_tftp 1 option tftp_root /usr/libexec/tftpboot option tftp_unique_root mac config boot router option serveraddress 192.168.1.1 option servername tftp.example.com option filename openwrt-initramfs-kernel.bin ... With this configuration, dnsmasq will serve /usr/libexec/tftpboot/00-11-22-33-44-55/openwrt-initramfs-kernel.bin to the client with MAC address 00:11:22:33:44:55. Signed-off-by: W. Michael Petullo <mike@flyn.org>
* dnsmasq: abort dhcp_check on interface stateDavid Bauer2020-08-201-2/+2
| | | | | | | | | Abort the dhcp-check based on the interface instead of the carrier state. In cases where the interface is up but the carrier is down, netifd won't cause a dnsmasq reload, thus dhcp won't become active on this interface. Signed-off-by: David Bauer <mail@david-bauer.net>
* dnsmasq: abort when dnssec requested but not availableYousong Zhou2020-08-071-2/+6
| | | | | | | | | | | | | | | | | | | | | | Before this commit, if uci option "dnssec" was set, we pass "--dnssec" and friends to dnsmasq, let it start and decide whether to quit and whether to emit message for diagnosis # dnsmasq --dnssec; echo $? dnsmasq: DNSSEC not available: set HAVE_DNSSEC in src/config.h 1 DNSSEC as a feature is different from others like dhcp, tftp in that it's a security feature. Better be explicit. With this change committed, we make it so by not allowing it in the first in the initscript, should dnsmasq later decides to not quit (not likely) or quit without above explicit error (unlikely but less so ;) So this is just being proactive. on/off choices with uci option "dnssec" are still available like before Link: https://github.com/openwrt/openwrt/pull/3265#issuecomment-667795302 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* dnsmasq: hotplug script tidyupKevin Darbyshire-Bryant2020-05-101-5/+2
| | | | | | | | Hotplug scripts are sourced so the #!/bin/sh is superfluous/deceptive. Re-arrange script to only source 'procd' if we get to the stage of needing to signal the process, reduce hotplug processing load a little. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: always inform about disabled dhcp servicePetr Štetiar2020-04-301-6/+6
| | | | | | | | | | | | | | | | | Init script checks for an already active DHCP server on the interface and if such DHCP server is found, then it logs "refusing to start DHCP" message, starts dnsmasq without DHCP service unless `option force 1` is set and caches the DHCP server check result. Each consecutive service start then uses this cached DHCP server check result, but doesn't provide log feedback about disabled DHCP service anymore. So this patch ensures, that the log message about disabled DHCP service on particular interface is always provided. Acked-by: Hans Dedecker <dedeckeh@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* dnsmasq: fix dnssec+ntp chicken-and-egg workaround (FS#2574)Henrique de Moraes Holschuh2020-03-251-3/+2
| | | | | | | | | | | | | | | | | | | | | | | Fix the test for an enabled sysntp initscript in dnsmasq.init, and get rid of "test -o" while at it. Issue reproduced on openwrt-19.07 with the help of pool.ntp.br and an RTC-less ath79 router. dnssec-no-timecheck would be clearly missing from /var/etc/dnsmasq.conf.* while the router was still a few days in the past due to non-working DNSSEC + DNS-based NTP server config. The fix was tested with the router in the "DNSSEC broken state": it properly started dnsmasq in dnssec-no-timecheck mode, and eventually ntp was able to resolve the server name to an IP address, and set the system time. DNSSEC was then enabled by SIGINT through the ntp hotplug hook, as expected. A missing system.ntp.enabled UCI node is required for the bug to show up. The reasons for why it would be missing in the first place were not investigated. Signed-off-by: Henrique de Moraes Holschuh <henrique@nic.br> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* dnsmasq: init: get rid of test -a and test -oHenrique de Moraes Holschuh2020-03-251-17/+17
| | | | | | | Refer to shellcheck SC2166. There are just too many caveats that are shell-dependent on test -a and test -o to use them. Signed-off-by: Henrique de Moraes Holschuh <henrique@nic.br>
* dnsmasq: add 'scriptarp' optionJordan Sokolic2020-03-221-0/+2
| | | | | | | | | | | Add option 'scriptarp' to uci dnsmasq config to enable --script-arp functions. The default setting is false, meaning any scripts in `/etc/hotplug.d/neigh` intended to be triggered by `/usr/lib/dnsmasq/dhcp-script.sh` will fail to execute. Also enable --script-arp if has_handlers returns true. Signed-off-by: Jordan Sokolic <oofnik@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* dnsmasq: fix uci-defaults script to exit 0 so it is cleaned upRussell Senior2020-02-191-0/+2
| | | | | | | | | | A file, package/network/services/dnsmasq/files/50-dnsmasq-migrate-resolv-conf-auto.sh, was added in commit 6a2855212096d2c486961a0841b037bae4b75de7, but it does not exit in a way that tells the uci-defaults mechanism that it succeeded, and so it is not cleaned up after running successfully. Add an exit 0 to the end to correct that. Signed-off-by: Russell Senior <russell@personaltelco.net>
* dnsmasq: add uci-defaults script for config migrationDaniel Golle2020-01-091-0/+6
| | | | | | | | | When running sysupgrade from an existing configuration, UCI option dhcp.@dnsmasq[0].resolvfile needs to be modified in case it has not been changed from it's original value. Accomplish that using a uci-defaults script. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: switch to /tmp/resolv.conf.d/resolv.conf.autoDaniel Golle2020-01-072-7/+8
| | | | | | | Mount-bind directory instead of resolv.conf.auto file in jail to avoid problems when the file is deleted/replaced. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: correct sense & usage of dnsseccheckunsignedKevin Darbyshire-Bryant2019-11-231-1/+2
| | | | | | | | | | | | | dnsmasq v2.80 made 'dnssec-check-unsigned' the default, thus the uci option was rendered ineffectual: we checked unsigned zones no matter the setting. Disabling the checking of unsigned zones is now achieve with the "--dnssec-check-unsigned=no" dnsmasq option. Update init script to pass required option in the disabled case. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: move feature detection inside a shell funcYousong Zhou2019-06-111-6/+9
| | | | | | Resolves openwrt/packages#9219 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* dnsmasq: skip options that are not compiled inYousong Zhou2019-06-091-2/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is to make life easier for users with customized build of dnsmasq-full variant. Currently dnsmasq config generated by current service script will be rejected by dnsmasq build lacking DHCP feature - Options like --dhcp-leasefile have default values. Deleting them from uci config or setting them to empty value will make them take on default value in the end - Options like --dhcp-broadcast are output unconditionally Tackle this by - Check availablility of features from output of "dnsmasq --version" - Make a list of options guarded by HAVE_xx macros in src/options.c of dnsmasq source code - Ignore these options in xappend() Two things to note in this implementation - The option list is not exhaustive. Supposedly only those options that may cause dnsmasq to reject with "unsupported option (check that dnsmasq was compiled with DHCP/TFTP/DNSSEC/DBus support)" are taken into account here - This provides a way out but users' cooperation is still needed. E.g. option dnssec needs to be turned off, otherwise the service script will try to add --conf-file pointing to dnssec specific anchor file which dnsmasq lacking dnssec support will reject Resolves FS#2281 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* package/dnsmasq: add max_ttl/min_cache_ttl/max_cache_ttlAlexander Couzens2019-02-241-0/+3
| | | | | | | | | max_ttl - limit the ttl in the dns answer if greater as $max_ttl min_cache_ttl - force caching of dns answers even the ttl in the answer is lower than the $min_cache_ttl max_cache_ttl - cache only dns answer for $max_cache_ttl. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* dnsmasq: prefer localuse over resolvfile guessworkYousong Zhou2019-02-231-4/+4
| | | | | | | | | This makes it clear that localuse when explicitly specified in the config will have its final say on whether or not the initscript should touch /etc/resolv.conf, no matter whatever the result of previous guesswork would be Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* dnsmasq: allow using dnsmasq as the sole resolverYousong Zhou2019-02-191-15/+15
| | | | | | | | | | | | | | | | | | | | Currently it seems impossible to configure /etc/config/dhcp to achieve the following use case - run dnsmasq with no-resolv - re-generate /etc/resolv.conf with "nameserver 127.0.0.1" Before this change, we have to set resolvfile to /tmp/resolv.conf.auto to achive the 2nd effect above, but setting resolvfile requires noresolv being false. A new boolean option "localuse" is added to indicate that we intend to use dnsmasq as the local dns resolver. It's false by default and to align with old behaviour it will be true automatically if resolvfile is set to /tmp/resolv.conf.auto Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Acked-by: Hans Dedecker <dedeckeh@gmail.com>
* dnsmasq: add rapid commit config optionHans Dedecker2019-02-131-0/+1
| | | | | | | Add config option rapidcommit to enable support for DHCPv4 rapid commit (RFC4039) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dnsmasq: fix dnsmasq failure to start when ujail'dChristian Lamparter2018-10-161-1/+1
| | | | | | | | | | | | | | This patch fixes jailed dnsmasq running into the following issue: |dnsmasq[1]: cannot read /usr/share/dnsmasq/dhcpbogushostname.conf: No such file or directory |dnsmasq[1]: FAILED to start up |procd: Instance dnsmasq::cfg01411c s in a crash loop 6 crashes, 0 seconds since last crash Fixes: a45f4f50e16 ("dnsmasq: add dhcp-ignore-names support - CERT VU#598349") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [bump package release] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: add dhcp-ignore-names support - CERT VU#598349Kevin Darbyshire-Bryant2018-10-092-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | dnsmasq v2.80test8 adds the ability to ignore dhcp client's requests for specific hostnames. Clients claiming certain hostnames and thus claiming DNS namespace represent a potential security risk. e.g. a malicious host could claim 'wpad' for itself and redirect other web client requests to it for nefarious purpose. See CERT VU#598349 for more details. Some Samsung TVs are claiming the hostname 'localhost', it is believed not (yet) for nefarious purposes. /usr/share/dnsmasq/dhcpbogushostname.conf contains a list of hostnames in correct syntax to be excluded. e.g. dhcp-name-match=set:dhcp_bogus_hostname,localhost Inclusion of this file is controlled by uci option dhcpbogushostname which is enabled by default. To be absolutely clear, DHCP leases to these requesting hosts are still permitted, but they do NOT get to claim ownership of the hostname itself and hence put into DNS for other hosts to be confused/manipulate by. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: bump to dnsmasq v2.80test5Hans Dedecker2018-09-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refresh patches Remove 240-ubus patch as upstream accepted. Add uci option ubus which allows to enable/disable ubus support (enabled by default) Upstream commits since last bump: da8b651 Implement --address=/example.com/# c5db8f9 Tidy 7f876b64c22b2b18412e2e3d8506ee33e42db7c 974a6d0 Add --caa-record b758b67 Improve logging of RRs from --dns-rr. 9bafdc6 Tidy up file parsing code. 97f876b Properly deal with unaligned addresses in DHCPv6 packets. cbfbd17 Fix broken DNSSEC records in previous. b6f926f Don't return NXDOMAIN to empty non-terminals. c822620 Add --dhcp-name-match 397c050 Handle case of --auth-zone but no --auth-server. 1682d15 Add missing EDNS0 section. EDNS0 section missing in replies to EDNS0-containing queries where answer generated from --local=/<domain>/ dd33e98 Fix crash parsing a --synth-domain with no prefix. Problem introduced in 2.79/6b2b564ac34cb3c862f168e6b1457f9f0b9ca69c c16d966 Add copyright to src/metrics.h 1dfed16 Remove C99 only code. 6f835ed Format fixes - ubus.c 9d6fd17 dnsmasq.c fix OPT_UBUS option usage 8c1b6a5 New metrics and ubus files. 8dcdb33 Add --enable-ubus option. aba8bbb Add collection of metrics caf4d57 Add OpenWRT ubus patch Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dnsmasq: remove creation of /etc/ethersHans Dedecker2018-08-211-3/+0
| | | | | | | | Remove creation of file /etc/ethers in dnsmasq init script as the file is now created by default in the base-files package by commit fa3301a28e Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dnsmasq: don't use network functions at boottime (FS#1542)Hans Dedecker2018-07-171-5/+14
| | | | | | | | | | | | As dnsmasq is started earlier than netifd usage of network.sh functions at boottime will fail; therefore don't call at boottime the functions which construct the dhcp pool/relay info. As interface triggers are installed the dhcp pool/relay info will be constructed when the interface gets reported as up by netifd. At the same time also register interface triggers based on DHCP relay config. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dnsmasq: fix dnsmasq startup issueHans Dedecker2018-06-201-8/+0
| | | | | | | | | | | Commit ecd954d530 installs specific interface triggers which rewrites the dnsmasq config file and restarts dnsmasq if the network interface becomes active for which a trigger has been installed. In case no dhcp sections are specified or ignore is set to 1 dnsmasq will not be started at startup which breaks DNS resolving. Fix this by ditching the BOOT check in start_service and always start dnsmasq at startup. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dnsmasq: fix confdir option processing (FS#1572)Hans Dedecker2018-06-111-1/+2
| | | | | | | | Fix condir option processing allowing to use the format "<directory>[,<file-extension>......]," as documented on the dnsmasq man page which previously resulted into bogus dir being created. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* Revert "dnsmasq: use "hostsdir" instead of "addn-hosts""Hans Dedecker2018-05-241-1/+1
| | | | | | | | | This reverts commit a03035dad198cd4b51645ceb43c1170f9cf95f16 as it has several issues: -Host file is located in a directory which is not unique per dnsmasq instance -odhcpd writes host info into the same directory but still sends a SIGHUP to dnsmasq Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-28 13:37:18 +0000