aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel
Commit message (Collapse)AuthorAgeFilesLines
* kernel: fix missing mhi control devicesKoen Vandeputte2022-08-081-4/+6
| | | | | | | | | | | | | | Both of these packages depend on CONFIG_WWAN in the kernel. Also fix the missing "wwan" subfolder in the path. This fixes the missing devices in /dev after booting an MHI capable modem. Fixes: 2519190fec ("kernel: package mhi wwan ctrl driver") Fixes: 6af46796fa ("kernel: package mhi mbim driver") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mac80211: backport upstream fix for unitialized lock usageKoen Vandeputte2022-08-081-0/+46
| | | | | | | | | | | | | | | Backports upstream fix from 5.19 lockdep complains use of uninitialized spinlock at ieee80211_do_stop() [1], for commit f856373e2f31ffd3 ("wifi: mac80211: do not wake queues on a vif that is being stopped") guards clear_bit() using fq.lock even before fq_init() from ieee80211_txq_setup_flows() initializes this spinlock. According to discussion [2], Toke was not happy with expanding usage of fq.lock. Since __ieee80211_wake_txqs() is called under RCU read lock, we can instead use synchronize_rcu() for flushing ieee80211_wake_txqs(). Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: netsupport: Extract act_policeHauke Mehrtens2022-08-061-2/+13
| | | | | | | This extracts kmod-sched-act-police to allow using it without adding all the packages from the big kmod-sched package. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
* kernel: ipt-ipset: Add ipset/ip_set_hash_ipmac.koHauke Mehrtens2022-08-061-0/+1
| | | | | | | Add the ipset/ip_set_hash_ipmac.ko file. The CONFIG_IP_SET_HASH_IPMAC KConfig option is already set by the package. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
* kernel: netsupport: Add kmod-sched-act-sampleThomas Langer2022-08-061-0/+20
| | | | | | | | This adds the act_sample.ko and psample.ko kernel module which allows traffic sampling. Signed-off-by: Thomas Langer <tlanger@maxlinear.com> Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
* kernel: netsupport: Extract sched-prio and sched-redThomas Langer2022-08-061-3/+33
| | | | | | | | | Extract the kmod-sched-prio and kmod-sched-red kernel modules from the big kmod-sched package. This allows adding the two kernel modules to OpenWrt without adding the kmod-sched and all its depdnecy. Signed-off-by: Thomas Langer <tlanger@maxlinear.com> Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
* kernel: netsupport: Add kmod-sched-drrHauke Mehrtens2022-08-061-0/+16
| | | | | | This adds a package with the DRR scheduler. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
* kernel: netsupport: kmod-sched: Reorder packagesHauke Mehrtens2022-08-061-49/+53
| | | | | | | | This puts the kmod-sched packages into an alphabetical order. I kept the kmod-sched-core at the top as this is the main package. No changes other than reordering were done. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
* kernel: netsupport: kmod-sched: explicitly define included modulesThomas Langer2022-08-061-6/+5
| | | | | | | | | | Change SCHED_MODULES_EXTRA to an explicit list of modules instead of taking everything that is not filtered out. This removes the need of updating the filter each time an extra sch_*, act_* or similar is added with an own kmod definition. Signed-off-by: Thomas Langer <tlanger@maxlinear.com> Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
* kernel: netsupport: kmod-sched: Add kmod-lib-textsearch dependencyHauke Mehrtens2022-08-061-1/+1
| | | | | | | The CONFIG_NET_EMATCH_TEXT configuration option depends on the kmod-lib-textsearch package. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
* kernel: netsupport: kmod-sched: Remove sch_fq_codel and sch_fifoHauke Mehrtens2022-08-061-3/+1
| | | | | | | | | The sch_fq_codel.ko and the sch_fifo.ko are always compiled into the kernel, they are activated in the generic kernel configuration. There is no need to activate the build of these kernel modules in the kmod-sched* packages. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
* kernel: add kmod-usb-hid-mcp2221Leo Soares2022-08-051-0/+17
| | | | | | | | | | "The MCP2221 is a USB-to-UART/I2C serial converter which enables USB connectivity in applications that have a UART and I2C interfaces." <https://www.microchip.com/en-us/product/MCP2221> Signed-off-by: Leo Soares <leo@hyper.ag> (replaced GPIOLIB KConfig with @GPIO_SUPPORT) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: usb-serial-cp210x: @GPIO_SUPPORTChristian Lamparter2022-08-051-2/+2
| | | | | | | | | | all other drivers depend on @GPIO_SUPPORT rather than forcing CONFIG_GPIOLIB=y. (I wonder what would happen if someone decides to try UML with USBIP?) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: Update to version 5.15.58-1Hauke Mehrtens2022-07-3130-247/+91
| | | | | | | | This updates mac80211 to version 5.15.58-1 which is based on kernel 5.15.58. The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-nvme packageDaniel Golle2022-07-301-0/+23
| | | | | | | | | | | | | | | | Add driver for NVM Express block devices, ie. PCIe connected SSDs. Targets which allow booting from NVMe (x86, maybe some mvebu boards come to mind) should have it built-in, so rootfs can be mounted from there. For targets without NVMe support in bootloader or BIOS/firmware it's sufficient to provide the kernel module package. On targets having the NVMe driver built-in the resulting kmod package is an empty dummy. In any case, depending on or installing kmod-nvme results in driver support being available (either because it was already built-in or because the relevant kernel modules are added and loaded). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: netconsole: add network console logging supportCatalin Toda2022-07-171-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Accessing the console on many devices is difficult. netconsole eases debugging on devices that crash after the network is up. Reference to the netconsole documentation in upstream Linux: <https://www.kernel.org/doc/html/latest/networking/netconsole.html> | |netconsole=[+][src-port]@[src-ip]/[<dev>],[tgt-port]@<tgt-ip>/[tgt-macaddr] | | where | + if present, enable extended console support | src-port source for UDP packets (defaults to 6665) | src-ip source IP to use (interface address) | dev network interface (eth0) | tgt-port port for logging agent (6666) | tgt-ip IP address for logging agent | tgt-macaddr ethernet MAC address for logging agent (broadcast) OpenWrt specific notes: OpenWrt's device userspace scripts are attaching the network interface (i.e. eth0) to a (virtual) bridge (br-lan) device. This will cause netconsole to report: |network logging stopped on interface eth0 as it is joining a master device (and unfortunately the traffic/logs to stop at this point) As a workaround, the netconsole module can be manually loaded again after the bridge has been setup with: insmod netconsole netconsole=@/br-lan,@192.168.1.x/MA:C... One way of catching errors before the handoff, try to append the /etc/modules.conf file with the following extra line: options netconsole netconsole=@/eth0,@192.168.1.x/MA:C... and install the kmod-netconsole (=y) into the base image. Signed-off-by: Catalin Toda <catalinii@yahoo.com> (Added commit message from PR, added links to documentation) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* module/firmware: remove intersil PRISM54 supportChristian Lamparter2022-07-151-17/+0
| | | | | | | | | | | the legacy driver was dropped in linux 5.14-rc3: commit d249ff28b1d8 ("intersil: remove obsolete prism54 wireless driver") Quoting Lukas Bulwahn: "p54 replaces prism54 so users should be unaffected." Reported-by: Marius Dinu <m95d+git@psihoexpert.ro> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: fix AQL issue with multicast trafficFelix Fietkau2022-07-131-0/+30
| | | | | | Exclude multicast from pending AQL budget Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: enable CONFIG_BRCMFMAC_SDIO for imx/cortexa7Lech Perczak2022-07-111-0/+1
| | | | | | | TechNexion PICO-PI-IMX7D uses BCM4339 Wi-Fi interface in SDIO mode. Enable SDIO support for imx/cortexa7 to fully support it in images. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* kernel: add kmod-btsdio packageLech Perczak2022-07-111-0/+18
| | | | | | | | Add package supporting Bluetooth HCI interfaces connected over SDIO. Signed-off-by: Lech Perczak <lech.perczak@gmail.com> [pepe2k@gmail.com: dropped rfkill dependency, other minor text fixes] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* kernel: add kmod-touchscreen-edt-ft5x06 packageLech Perczak2022-07-111-0/+21
| | | | | | | This module contains driver for touchscreen used in TechNexion PICO-PI-IMX7D board. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ksmbd: fix compile on kernel 5.15.52+Kevin Darbyshire-Bryant2022-07-091-0/+69
| | | | | | | Backport upstream fix to build on kernel 5.15.52 or later since kernel devs backported newer functionality to older kernels. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mac80211: Add DRIVER_11AX_SUPPORT dependency to mac80211-hwsim and iwlwifiHauke Mehrtens2022-07-032-2/+2
| | | | | | | The mac80211-hwsim and the Intel iwlwifi driver support ieee80211ax, add the missing DRIVER_11AX_SUPPORT dependency too. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mt76: update to the latest versionFelix Fietkau2022-07-031-3/+3
| | | | | | 93e3fce916c6 mt76: pass original queue id from __mt76_tx_queue_skb to the driver Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: rename patch to avoid duplicate patch numberFelix Fietkau2022-07-021-0/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2022-07-021-3/+3
| | | | | | | c07f45927839 firmware: update mt7622 firmware to version 20220630 af406a2d1c36 mt76: do not use skb_set_queue_mapping for internal purposes Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix mesh queue selection issueFelix Fietkau2022-07-021-0/+28
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: netdevices: load rtl8366s on bootLuiz Angelo Daros de Luca2022-07-011-1/+1
| | | | | | | This external switch driver should be loaded on boot for network support in failsafe mode. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* kernel: netdevices: add rtl8367 moduleLuiz Angelo Daros de Luca2022-07-011-0/+16
| | | | | | | Create a package for rtl8367 to use it as loadable module instead of a builtin one. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* kernel: netdevices: load rtl8366rb on bootLuiz Angelo Daros de Luca2022-07-011-1/+1
| | | | | | | This external switch driver should be loaded on boot for network support in failsafe mode. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* mac80211: read alternative brcm fw names from DTStijn Tintel2022-07-011-0/+205
| | | | | | This patch is required for the Raspberry Pi Zero 2 W. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* mac80211: add patch for mwifiex to fix cryptic errors/warningsJosef Schlehofer2022-06-291-0/+200
| | | | | | | | | | | | | | | In Turris MOX SDIO card [1], which uses Marvell 88W997 and its driver mwifiex, you might get cryptic messages, which are not helpful to use. @pali created patch, which improves messages by the driver and he will send this to Linux kernel soon. Before: [ 81.026156] mwifiex_sdio mmc1:0001:1: CMD_RESP: cmd 0x20 error, result=0x1 After: [ 15.784018] mwifiex_sdio mmc1:0001:1: CMD_RESP: cmd RF_ANTENNA (0x20) error, result=0x1 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* mac80211: mwl: add patch to raise global limit of SSID up to 4Josef Schlehofer2022-06-291-0/+46
| | | | | | | SDIO chip 88W9997 from NXP [1] is quite limited by its firmware and driver. Add hacky patch to allow up to 4 SSID instead of 3 SSID. Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* hostapd: introduce min_tx_power optionStijn Tintel2022-06-281-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce a new option min_tx_power to configure the minimum permitted max TX power (in dBm) for ACS and DFS channel selection. Imagine the following regulatory rules: * 5180 MHz [36] (21.0 dBm) * 5200 MHz [40] (21.0 dBm) * 5220 MHz [44] (21.0 dBm) * 5240 MHz [48] (21.0 dBm) * 5260 MHz [52] (20.0 dBm) (radar detection) * 5280 MHz [56] (20.0 dBm) (radar detection) * 5300 MHz [60] (20.0 dBm) (radar detection) * 5320 MHz [64] (20.0 dBm) (radar detection) * 5500 MHz [100] (21.0 dBm) (radar detection) * 5520 MHz [104] (21.0 dBm) (radar detection) * 5540 MHz [108] (21.0 dBm) (radar detection) * 5560 MHz [112] (21.0 dBm) (radar detection) * 5580 MHz [116] (21.0 dBm) (radar detection) * 5600 MHz [120] (21.0 dBm) (radar detection) * 5620 MHz [124] (21.0 dBm) (radar detection) * 5640 MHz [128] (21.0 dBm) (radar detection) * 5660 MHz [132] (21.0 dBm) (radar detection) * 5680 MHz [136] (21.0 dBm) (radar detection) * 5700 MHz [140] (21.0 dBm) (radar detection) * 5720 MHz [144] (13.0 dBm) (radar detection) * 5745 MHz [149] (13.0 dBm) * 5765 MHz [153] (13.0 dBm) * 5785 MHz [157] (13.0 dBm) * 5805 MHz [161] (13.0 dBm) * 5825 MHz [165] (13.0 dBm) * 5845 MHz [169] (13.0 dBm) * 5865 MHz [173] (13.0 dBm) When ACS or DFS end up selecting channel 144 or higher, some clients might no longer be able to communicate with the AP due to the TX power being limited to 13 dBm. Setting min_tx_power to 20 will result in hostapd not considering these channels during ACS or after a DFS event. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: David Bauer <mail@david-bauer.net>
* hostapd: introduce background_radar optionStijn Tintel2022-06-281-1/+6
| | | | | | | | | | | | | | Introduce a new option background_radar to toggle hostapd's background radar feature. Enabling this allows DFS CAC to run on dedicated radio RF chains while the radio(s) are otherwise running normal AP activities on other channels. As OpenWrt configures hostapd to use a channel list even when a single channel is configured, using this feature requires a list of channels in /etc/config/wireless. Alternatively, channel can be set to auto. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: David Bauer <mail@david-bauer.net>
* ath10k: enable encapsulation offload by defaultTiago Gaspar2022-06-271-1/+2
| | | | | | | | | | | | | | Enable ath10k offload by default. This improves wireless performance without requiring user configuration. This adds ath10k_core to the AUTOLOAD section so that the frame_mode paramter can be added to /etc/modules.d and passed to the driver. The frame_mode 2 enables ethernet mode on the firmware/driver. This parameter is set by passing a different value to the frame_mode value on kmod insmod. Link to the original patchset: https://patchwork.kernel.org/project/linux-wireless/cover/20220516032519.29831-1-ryazanov.s.a@gmail.com/ Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com>
* mac80211: increase airtime scheduler quantumFelix Fietkau2022-06-261-0/+53
| | | | | | improves performance by requiring fewer iterations over tx queues Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add airtime fairness improvementsFelix Fietkau2022-06-259-6/+1698
| | | | | | | | This reverts the airtime scheduler back from the virtual-time based scheduler to the deficit round robin scheduler implementation. This reduces burstiness and improves fairness by improving interaction with AQL. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2022-06-241-3/+3
| | | | | | | | | | | | | | | 1696f9eb8b40 mt76: mt7915: do not copy ieee80211_ops pointer in mt7915_mmio_probe a4db5869d660 mt76: mt7915: update mpdu density in 6g capability 500c18014d95 mt76: mt7915: add sta_rec with EXTRA_INFO_NEW for the first time only 3ef66fc7c714 mt76: do not check the ccmp pn for ONLY_MONITOR frame dd682eead016 mt76: mt7915: update the maximum size of beacon offload 4fb991f2c997 mt76: mt7615: add sta_rec with EXTRA_INFO_NEW for the first time only ba39ed3b44f1 mt76: mt76x02: improve reliability of the beacon hang check fd8211cf7c59 mt76: mt7921: sync with updated patch f2edd340ddb4 mt76: allow receiving frames with invalid CCMP PN via monitor interfaces b6e865e2cc70 mt76: mt7615: fix throughput regression on DFS channels Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: brcmfmac: allow setting MAC from NVMEM cellsTomasz Maciej Nowak2022-06-243-4/+107
| | | | | | | | | The MAC can be stored in OTP memory or in flash memory, currently the driver could read it only from OTP. Backport the patch allowing setting the MAC address from flash. Some modules have the OTP programmed but the ODM/OEM decided to overwrite it with value stored in flash. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* kernel: clean-up after kernel 5.4 removalTomasz Maciej Nowak2022-06-248-30/+19
| | | | | | | These narrowments are no longer useful, since there's no lower version than 5.10 supported in tree. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* mt76: update to the latest versionFelix Fietkau2022-06-211-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4554ee652caf mt76: mt7921: fix warning Using plain integer as NULL pointer a3f1d6ccf3ca mt76: mt7921: add missing bh-disable around rx napi schedule 9aeca2a5ce47 mt76: mt7921: get rid of mt7921_mcu_exit fee8a5911c76 mt76: connac: move shared fw structures in connac module db4d784ae7ba mt76: mt7921: move fw toggle in mt7921_load_firmware 16ab6bf49556 mt76: connac: move mt76_connac2_load_ram in connac module 29fd748801c6 mt76: connac: move mt76_connac2_load_patch in connac module 051c68d18214 mt76: mt7663: rely on mt76_connac2_fw_trailer d6ae3505ac6c mt76: enable the VHT extended NSS BW feature 488a5ccc9762 mt76: mt7921: rely on mt76_dev in mt7921_mac_write_txwi signature 934029bb93e2 mt76: mt7915: rely on mt76_dev in mt7915_mac_write_txwi signature ecefae4c7d72 mt76: connac: move mac connac2 defs in mt76_connac2_mac.h b5eecc841df8 mt76: connac: move connac2_mac_write_txwi in mt76_connac module 012e619a07b9 mt76: connac: move mt76_connac2_mac_add_txs_skb in connac module 1b492be795ea mt76: mt7921: not support beacon offload disable command f1f46d3b4b19 mt76: mt7921: fix command timeout in AP stop period cae61112ef1d mt76: connac: move HE radiotap parsing in connac module 487674062643 mt76: connac: move mt76_connac2_reverse_frag0_hdr_trans in mt76-connac module 649bdc4983c4 mt76: connac: move mt76_connac2_mac_fill_rx_rate in connac module cb75aaa39252 mt76: mt7921s: remove unnecessary goto in mt7921s_mcu_drv_pmctrl e0eaf66eaebb mt76: mt7615: do not update pm stats in case of error f8d125b4ea30 mt76: mt7921: do not update pm states in case of error 6329a834907e mt76: mt7921s: fix possible sdio deadlock in command fail 8a04f1b04662 mt76: mt7921: fix aggregation subframes setting to HE max e52283439094 mt76: mt7915: disable UL MU-MIMO for mt7915 fd3958970e3d mt76: mt7921: enlarge maximum VHT MPDU length to 11454 18df38fe77f7 mt76: mt7915: get rid of unnecessary new line in mt7915_mac_write_txwi 149e95f5d7a6 mt76: connac: move mt76_connac_fw_txp in common module 899d192e8a79 mt76: move mt7615_txp_ptr in mt76_connac module 7184f0a6f6a5 mt76: connac: move mt76_connac_tx_free in shared code c42d45278fa5 mt76: connac: move mt76_connac_tx_complete_skb in shared code 0993f4ef96f8 mt76: connac: move mt76_connac_write_hw_txp in shared code 467960fab791 mt76: connac: move mt7615_txp_skb_unmap in common code 2e758064b085 mt76: mt7915: rely on mt76_connac_tx_free 2065a7901671 mt76: move mcu_txd/mcu_rxd structures in shared code 576c1b7c472b mt76: move mt76_connac2_mcu_fill_message in mt76_connac module 7275f7758090 mt76: mt7915: fix incorrect testmode ipg on band 1 caused by wmm_idx Signed-off-by: Felix Fietkau <nbd@nbd.name>
* broadcom-wl: Fix compilation with kernel 5.10Florian Fainelli2022-06-204-8/+50
| | | | | | | | | | | | | This adds a few fixes for compiling against Linux 5.10: 1. segment_eq() has been removed with upstream commit 428e2976a5bf7e7f5554286d7a5a33b8147b106a ("uaccess: remove segment_eq") and can use uaccess_kernel() instead 2. ioremap_nocache() is removed and is now an alias for ioremap() with upstream commit 4bdc0d676a643140bdf17dbf7eafedee3d496a3c ("remove ioremap_nocache and devm_ioremap_nocache") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* ath10k: backport encapsulation offload supportZhijun You2022-06-1911-20/+520
| | | | | | | | This backports encap offload support from upstream. On some ath10k devices there can be about 10% improvement on tx throughput. Users can turn it on by setting frame_mode=2. Signed-off-by: Zhijun You <hujy652@gmail.com>
* kernel: add kmod-leds-pca955xChris Blake2022-06-191-0/+19
| | | | | | | | | This patch adds support for the mainline kernel module for the PCA955x LED driver. Note this requires i2c and GPIO support. Also worth calling out this driver also enables GPIO support, depending on device tree configuration. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* netfilter: kmod-nft-xfrmFlorian Eckert2022-06-191-0/+11
| | | | | | Add kmod-nft-xfrm package. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* Revert "mac80211: add airtime fairness rework/fixes"Felix Fietkau2022-06-183-986/+2
| | | | | | | This reverts commit 96012227e578a0d8dcfa86823db97345e98e2c8f. Needs some more work until it is ready Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Revert "mac80211: sync airtime fairness fixes with updated upstream submission"Felix Fietkau2022-06-186-239/+90
| | | | | | | This reverts commit 958785508cc802de75698607670f9a236883d24d. Needs some more work until it is ready Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: sync airtime fairness fixes with updated upstream submissionFelix Fietkau2022-06-156-90/+239
| | | | | | | | - fix ath10k latency issues - reject too large weight values - code cleanup Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: sync nl80211.h with upstreamDavid Bauer2022-06-111-0/+22
| | | | | | | | | | | | Sync nl80211.h with upstream in order to maintain parity with nl80211_copy.h shipped with hostapd. This is necessary, as currently the enum value for NL80211_EXT_FEATURE_RADAR_BACKGROUND mismatches between hostapd and mac80211. This breaks background radar capability detection in hostapd. Reported-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David Bauer <mail@david-bauer.net>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-01 19:40:27 +0000