aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: brcm: backport remaining brcmfmac 5.2 patchesRafał Miłecki2019-06-168-1/+361
| | | | | | | This improves FullMAC firmware compatibility, adds logging in case of firmware crash and *may* fix "Invalid packet id" errors. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* netsupport: improve xfrm module supportAndré Valentin2019-06-161-2/+2
| | | | | | | -switch to module autoprobe -exclude 4.9 kernel Signed-off-by: André Valentin <avalentin@marcant.net>
* mac80211: refresh patchesChristian Lamparter2019-06-152-19/+16
| | | | Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: ath10k: adjust tx power reduction for US regulatory domainSven Eckelmann2019-06-151-0/+101
| | | | | | | | | | | | | | | | | | | | | | | | FCC allows maximum antenna gain of 6 dBi. 15.247(b)(4): > (4) The conducted output power limit > specified in paragraph (b) of this section > is based on the use of antennas > with directional gains that do not exceed > 6 dBi. Except as shown in paragraph > (c) of this section, if transmitting > antennas of directional gain greater > than 6 dBi are used, the conducted > output power from the intentional radiator > shall be reduced below the stated > values in paragraphs (b)(1), (b)(2), > and (b)(3) of this section, as appropriate, > by the amount in dB that the > directional gain of the antenna exceeds > 6 dBi. https://www.gpo.gov/fdsys/pkg/CFR-2013-title47-vol1/pdf/CFR-2013-title47-vol1-sec15-247.pdf Signed-off-by: Sven Eckelmann <sven@narfation.org>
* mac80211: ath10k: fix max antenna gain unitSven Eckelmann2019-06-151-0/+49
| | | | | | | | | | | | | | | Most of the txpower for the ath10k firmware is stored as twicepower (0.5 dB steps). This isn't the case for max_antenna_gain - which is still expected by the firmware as dB. The firmware is converting it from dB to the internal (twicepower) representation when it calculates the limits of a channel. This can be seen in tpc_stats when configuring "12" as max_antenna_gain. Instead of the expected 12 (6 dB), the tpc_stats shows 24 (12 dB). Tested on QCA9888 and IPQ4019 with firmware 10.4-3.5.3-00057. Signed-off-by: Sven Eckelmann <sven@narfation.org>
* mac80211: ath9k: Increase allowed antenna gain to 6 dBiSven Eckelmann2019-06-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | FCC allows maximum antenna gain of 6 dBi. 15.247(b)(4): > (4) The conducted output power limit > specified in paragraph (b) of this section > is based on the use of antennas > with directional gains that do not exceed > 6 dBi. Except as shown in paragraph > (c) of this section, if transmitting > antennas of directional gain greater > than 6 dBi are used, the conducted > output power from the intentional radiator > shall be reduced below the stated > values in paragraphs (b)(1), (b)(2), > and (b)(3) of this section, as appropriate, > by the amount in dB that the > directional gain of the antenna exceeds > 6 dBi. Signed-off-by: Sven Eckelmann <sven@narfation.org>
* kernel: Add AEAD and RNG support to kmod-crypto-userRosen Penev2019-06-151-1/+5
| | | | | | | | Now that kernel 3.18 is gone, we can safely add these features. Tested on Turris Omnia. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ath10k-ct: Update to 2019-06-13Kevin Darbyshire-Bryant2019-06-139-23/+23
| | | | | | | | | | | | Changes: ath10k: Improve PMF/MPF mgt frame check And add a driver for 5.2 (beta, not even tested yet) kernel. Refresh patches. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* netsupport: add xfrmi interface supportAndré Valentin2019-06-091-0/+16
| | | | | | | | Add support for xfrm interfaces in kernel. XFRM interfaces are used by the IPsec stack for tunneling. XFRM interfaces are available since linux 4.19. Signed-off-by: André Valentin <avalentin@marcant.net>
* gpio-button-hotplug: gpio-keys: fix always missing first eventPetr Štetiar2019-06-091-9/+2
| | | | | | | | | | | | | Commit afc056d7dc83 ("gpio-button-hotplug: support interrupt properties") changed the gpio-keys interrupt handling logic in a way, that it always misses first event, which causes issues with rc.button scripts, so this patch restores the previous behaviour. Fixes: afc056d7dc83 ("gpio-button-hotplug: support interrupt properties") Reported-by: Kristian Evensen <kristian.evensen@gmail.com> Tested-by: Kuan-Yi Li <kyli.tw@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [drop state check]
* gpio-button-hotplug: fix wrong initial seen valuePetr Štetiar2019-06-091-0/+3
| | | | | | | | | | | | | | | Currently the generated event contains wrong seen value, when the button is pressed for the first time: rmmod gpio_button_hotplug; modprobe gpio_button_hotplug [ pressing the wps key immediately after modprobe ] gpio-keys: create event, name=wps, seen=1088, pressed=1 So this patch adds a check for this corner case and makes seen=0 if the button is pressed for the first time. Tested-by: Kuan-Yi Li <kyli.tw@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* gpio-button-hotplug: use pr_debug and pr_errPetr Štetiar2019-06-091-17/+6
| | | | | | | pr_debug can be used with dynamic debugging. Tested-by: Kuan-Yi Li <kyli.tw@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: backport act_ctinfoKevin Darbyshire-Bryant2019-06-061-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ctinfo is a new tc filter action module. It is designed to restore information contained in firewall conntrack marks to other packet fields and is typically used on packet ingress paths. At present it has two independent sub-functions or operating modes, DSCP restoration mode & skb mark restoration mode. The DSCP restore mode: This mode copies DSCP values that have been placed in the firewall conntrack mark back into the IPv4/v6 diffserv fields of relevant packets. The DSCP restoration is intended for use and has been found useful for restoring ingress classifications based on egress classifications across links that bleach or otherwise change DSCP, typically home ISP Internet links. Restoring DSCP on ingress on the WAN link allows qdiscs such as but by no means limited to CAKE to shape inbound packets according to policies that are easier to set & mark on egress. Ingress classification is traditionally a challenging task since iptables rules haven't yet run and tc filter/eBPF programs are pre-NAT lookups, hence are unable to see internal IPv4 addresses as used on the typical home masquerading gateway. Thus marking the connection in some manner on egress for later restoration of classification on ingress is easier to implement. Parameters related to DSCP restore mode: dscpmask - a 32 bit mask of 6 contiguous bits and indicate bits of the conntrack mark field contain the DSCP value to be restored. statemask - a 32 bit mask of (usually) 1 bit length, outside the area specified by dscpmask. This represents a conditional operation flag whereby the DSCP is only restored if the flag is set. This is useful to implement a 'one shot' iptables based classification where the 'complicated' iptables rules are only run once to classify the connection on initial (egress) packet and subsequent packets are all marked/restored with the same DSCP. A mask of zero disables the conditional behaviour ie. the conntrack mark DSCP bits are always restored to the ip diffserv field (assuming the conntrack entry is found & the skb is an ipv4/ipv6 type) e.g. dscpmask 0xfc000000 statemask 0x01000000 |----0xFC----conntrack mark----000000---| | Bits 31-26 | bit 25 | bit24 |~~~ Bit 0| | DSCP | unused | flag |unused | |-----------------------0x01---000000---| | | | | ---| Conditional flag v only restore if set |-ip diffserv-| | 6 bits | |-------------| The skb mark restore mode (cpmark): This mode copies the firewall conntrack mark to the skb's mark field. It is completely the functional equivalent of the existing act_connmark action with the additional feature of being able to apply a mask to the restored value. Parameters related to skb mark restore mode: mask - a 32 bit mask applied to the firewall conntrack mark to mask out bits unwanted for restoration. This can be useful where the conntrack mark is being used for different purposes by different applications. If not specified and by default the whole mark field is copied (i.e. default mask of 0xffffffff) e.g. mask 0x00ffffff to mask out the top 8 bits being used by the aforementioned DSCP restore mode. |----0x00----conntrack mark----ffffff---| | Bits 31-24 | | | DSCP & flag| some value here | |---------------------------------------| | | v |------------skb mark-------------------| | | | | zeroed | | |---------------------------------------| Overall parameters: zone - conntrack zone control - action related control (reclassify | pipe | drop | continue | ok | goto chain <CHAIN_INDEX>) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Make suitable adjustments for backporting to 4.14 & 4.19 and add to SCHED_MODULES_FILTER Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: add package for atusb wpan moduleSebastian Meiling2019-06-061-0/+11
| | | | | | | | This adds a new package for the kernel module of the ATUSB WPAN driver. Signed-off-by: Sebastian Meiling <s@mlng.net> [fixed SoB: and From: mismatch] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* Revert "kernel: backport act_ctinfo"Kevin Darbyshire-Bryant2019-06-061-9/+1
| | | | | | | | | | This reverts commit 7c50182e0cdce0366715082872a2afbcf208bbf8. Produces build error: Package kmod-sched is missing dependencies for the following libraries: nf_conntrack.ko Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: backport act_ctinfoKevin Darbyshire-Bryant2019-06-061-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ctinfo is a new tc filter action module. It is designed to restore information contained in firewall conntrack marks to other packet fields and is typically used on packet ingress paths. At present it has two independent sub-functions or operating modes, DSCP restoration mode & skb mark restoration mode. The DSCP restore mode: This mode copies DSCP values that have been placed in the firewall conntrack mark back into the IPv4/v6 diffserv fields of relevant packets. The DSCP restoration is intended for use and has been found useful for restoring ingress classifications based on egress classifications across links that bleach or otherwise change DSCP, typically home ISP Internet links. Restoring DSCP on ingress on the WAN link allows qdiscs such as but by no means limited to CAKE to shape inbound packets according to policies that are easier to set & mark on egress. Ingress classification is traditionally a challenging task since iptables rules haven't yet run and tc filter/eBPF programs are pre-NAT lookups, hence are unable to see internal IPv4 addresses as used on the typical home masquerading gateway. Thus marking the connection in some manner on egress for later restoration of classification on ingress is easier to implement. Parameters related to DSCP restore mode: dscpmask - a 32 bit mask of 6 contiguous bits and indicate bits of the conntrack mark field contain the DSCP value to be restored. statemask - a 32 bit mask of (usually) 1 bit length, outside the area specified by dscpmask. This represents a conditional operation flag whereby the DSCP is only restored if the flag is set. This is useful to implement a 'one shot' iptables based classification where the 'complicated' iptables rules are only run once to classify the connection on initial (egress) packet and subsequent packets are all marked/restored with the same DSCP. A mask of zero disables the conditional behaviour ie. the conntrack mark DSCP bits are always restored to the ip diffserv field (assuming the conntrack entry is found & the skb is an ipv4/ipv6 type) e.g. dscpmask 0xfc000000 statemask 0x01000000 |----0xFC----conntrack mark----000000---| | Bits 31-26 | bit 25 | bit24 |~~~ Bit 0| | DSCP | unused | flag |unused | |-----------------------0x01---000000---| | | | | ---| Conditional flag v only restore if set |-ip diffserv-| | 6 bits | |-------------| The skb mark restore mode (cpmark): This mode copies the firewall conntrack mark to the skb's mark field. It is completely the functional equivalent of the existing act_connmark action with the additional feature of being able to apply a mask to the restored value. Parameters related to skb mark restore mode: mask - a 32 bit mask applied to the firewall conntrack mark to mask out bits unwanted for restoration. This can be useful where the conntrack mark is being used for different purposes by different applications. If not specified and by default the whole mark field is copied (i.e. default mask of 0xffffffff) e.g. mask 0x00ffffff to mask out the top 8 bits being used by the aforementioned DSCP restore mode. |----0x00----conntrack mark----ffffff---| | Bits 31-24 | | | DSCP & flag| some value here | |---------------------------------------| | | v |------------skb mark-------------------| | | | | zeroed | | |---------------------------------------| Overall parameters: zone - conntrack zone control - action related control (reclassify | pipe | drop | continue | ok | goto chain <CHAIN_INDEX>) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Make suitable adjustments for backporting to 4.14 & 4.19 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* gpio-button-hotplug: support interrupt propertiesChristian Lamparter2019-05-311-21/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Upstream Linux's input gpio-keys driver supports specifying a external interrupt for a gpio via the 'interrupts' properties as well as having support for software debounce. This patch ports these features to OpenWrt's event version. Only the "pure" interrupt-driven support is left behind, since this goes a bit against the "gpio" in the "gpio-keys" and I don't have a real device to test this with. This patch also silences the generated warnings showing up since 4.14 due to the 'constification' of the struct gpio_keys_button *buttons variable in the upstream struct gpio_keys_platform_data declaration. gpio-button-hotplug.c: In function 'gpio_keys_get_devtree_pdata': gpio-button-hotplug.c:392:10: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] button = &pdata->buttons[i++]; ^ gpio-button-hotplug.c: In function 'gpio_keys_button_probe': gpio-button-hotplug.c:537:12: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] bdata->b = &pdata->buttons[i]; ^ gpio-button-hotplug.c: In function 'gpio_keys_probe': gpio-button-hotplug.c:563:37: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] struct gpio_keys_button *button = &pdata->buttons[i]; ^ Acked-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* gpio-button-hotplug: add KEY_POWER2 handlingAlan Swanson2019-05-301-0/+1
| | | | | | | | | | | | | | | | For devices such as BTHOMEHUBV5A with both reset and restart buttons, its easily accessible restart button has been assigned to KEY_POWER power script to poweroff preventing accidental (or malicious) factory resets by KEY_RESTART reset script. However an easily accessible button immediately powering off the device is also undesirable. As KEY_RESTART is already used for reset script (and there's no KEY_REBOOT in Linux input events), use KEY_POWER2 for rebooting via new reboot script with 5 second seen delay. Fixes: FS#1965 Signed-off-by: Alan Swanson <reiver@improbability.net> Signed-off-by: Petr Štetiar <ynezz@true.cz> [long line wrap]
* button-hotplug: add KEY_POWER2 handlingAlan Swanson2019-05-301-0/+1
| | | | | | | | | | | | | | | | For devices such as BTHOMEHUBV5A with both reset and restart buttons, its easily accessible restart button has been assigned to KEY_POWER power script to poweroff preventing accidental (or malicious) factory resets by KEY_RESTART reset script. However an easily accessible button immediately powering off the device is also undesirable. As KEY_RESTART is already used for reset script (and there's no KEY_REBOOT in Linux input events), use KEY_POWER2 for rebooting via new reboot script with 5 second seen delay. Fixes: FS#1965 Signed-off-by: Alan Swanson <reiver@improbability.net> Signed-off-by: Petr Štetiar <ynezz@true.cz> [long line wrap]
* ath10k-ct: Update to current versionRobert Marko2019-05-1111-48/+48
| | | | | | | | | | | | | This patch updates ath10k-ct to current version. Changes are: ath10k-ct: Fix printing PN in peer stats. Previous logic was incorrect. Also add set-special API to enable returning PN. Patches refreshed and tested on 8devices Jalapeno dev board(IPQ4019) Signed-off-by: Robert Marko <robimarko@gmail.com>
* ramips: mt7620: fix dependenciesDeng Qingfang2019-05-111-7/+7
| | | | | | | | | | | | | MT7620 integrated WMAC does not need RT2x00 PCI driver or firmware Also corrected kmod-eeprom-93cx6 and kmod-lib-crc-itu-t dependencies according to original Kconfig and lsmod output This will remove some unnecessary packages from MT7620 target to save some space Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [75 characters per line in the commit message]
* kernel: Remove support for kernel 3.18Hauke Mehrtens2019-05-0324-293/+38
| | | | | | | | | | No target is using kernel 3.18 anymore, remove all the generic support for kernel 3.18. The removed packages are depending on kernel 3.18 only and are not used on any recent kernel. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* omap24xx: Remove unmaintained targetHauke Mehrtens2019-05-032-26/+2
| | | | | | | | | | | | This target only supports kernel 4.1, which is not supported in OpenWrt any more for multiple releases. It also looks like there is no active maintainer for this target. Remove the code and all the packages which are only used by this target. To add this target to OpenWrt again port it to a recent and supported kernel version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* adm5120: Remove unmaintained targetHauke Mehrtens2019-05-031-2/+1
| | | | | | | | | | | | This target only supports kernel 3.18, which is not supported in OpenWrt any more for multiple releases. It also looks like there is no active maintainer for this target. Remove the code and all the packages which are only used by this target. To add this target to OpenWrt again port it to a recent and supported kernel version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: iio: Fix BMP280 Auto probingRobert Marko2019-05-021-2/+2
| | | | | | | | Currently Auto probing for BMP/BME280 does not work because kernel module name in the call is not correct. Package name was used instead of kernel module name. Signed-off-by: Robert Marko <robimarko@gmail.com>
* mac80211: rt2x00: replace patches with upstream versionDaniel Golle2019-04-2922-1203/+959
| | | | | | | | | | Support for RT3883/RT3663 was merged upstream [1]. Use that patch instead of our original series. The resulting source tree is exactly identical, this commit is merely reorganizing the patches. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git/commit/?id=d0e61a0f7cca51ce340a5a73595189972122ff25 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: fix regression in skb resizing optimization in monitor mode (FS#2254)Felix Fietkau2019-04-241-21/+21
| | | | | | | struct ieee80211_local needs to be passed in separately instead of dereferencing the (potentially NULL) sdata Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: Update to 2019-04-08Koen Vandeputte2019-04-231-3/+3
| | | | | | | | | | | | | | | | 9cd701a4f028 ath10k-ct: Add PN get/set API for wave-2 firmware. 5c8a4668323b ath10k-ct: Support over-riding the power ctl table in eeprom 75e2705f31bb ath10k-ct: CCA, eeprom, other changes. a696e602a0fc ath10k-ct: Attempt to fix-out-of-tree compile for 4.16 a2aec62262df ath10k: Improve beacon tx status for 4.20 kernel. be5c21a82b15 ath10k-ct: Fix out-of-tree compile for 4.20, pull in stable changes for 4.19 Fixes compile errors when using the 4.20 flavour. Also the amount of beacon errors seems to have dropped. Tested on a Mikrotik RB912UAGS-5HPacD Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mac80211: brcm: backport brcmfmac 5.2 patchesRafał Miłecki2019-04-1818-1/+1410
| | | | | | | This includes some USB fixes and early work on FullMAC firmware crash recovery. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: Fix kmod-drm-amdgpu and kmod-drm-radeon dependenciesLucian Cristian2019-04-161-7/+40
| | | | | | | | | | | | | | | | | | Currently the Geode builds fails on following kernel module missing dependencies: Package kmod-drm-amdgpu is missing dependencies for the following libraries: backlight.ko drm_kms_helper.ko fb.ko ttm.ko So this patch tries to fix the kmod-drm-amdgpu module dependecies. Fixes: 2f239c0 ("x86: video: add amdgpu DRM kernel package") Fixes: 2f6918e ("x86: video: add radeon DRM module support") Tested-by: Tomasz Maciej Nowak <tomek_n@o2.pl> Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* layerscape: unbreak ehci-fsl interaction with mpc85xxChristian Lamparter2019-04-151-22/+9
| | | | | | | | | | Both targets have their own idea of how to use ehci-fsl. This patch reverts part of commit 68b8d3b0796d ("kernel: usb: add FSL EHCI package") and moves ehci-fsl back into kmod-usb2, while also making it hopefully useable for the mpc85xx target. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: Fix rate_idx underflow in mwl8k (FS#2218)Petr Štetiar2019-04-142-1/+81
| | | | | | | Add a patch for mwl8k which fixes endless reboot loops on Linksys EA4500 with certain 5G configurations. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: usb: add FSL EHCI packageDavid Bauer2019-04-131-2/+21
| | | | | | | Add kernel module package for the Freescale USB2 EHCI used on the mpc85xx platform. Signed-off-by: David Bauer <mail@david-bauer.net>
* mac80211: rt2x00: replace patch with upstream versionDaniel Golle2019-04-123-57/+96
| | | | | | | | Replace the patch introduced by commit d0b969eee8 ("mac80211: rt2x00: do not increment sequence number while re-transmitting") was merged into wireless-drivers.git. Replace our version with the merged version. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: Add RIPEMD160 moduleRosen Penev2019-04-061-0/+12
| | | | | | | | After getting rid of cryptsetup's heavy openssl dependency, there is now the problem of missing RIPEMD160 support. RIPEMD160 is used for True/Vera crypt volumes as well as old LUKS1 ones. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: can: add Xilinx CAN IP kernel module packageLuis Araneda2019-04-061-1/+13
| | | | | | | This driver is required to use the CAN IP on devices from the zynq target Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* kernel: sound: add missing symbol to sound-soc-coreLuis Araneda2019-04-061-0/+1
| | | | | | | This fixes compilation on zynq target when migrating to sound kmod packages Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* mac80211: update to version 4.19.32-1Hauke Mehrtens2019-04-0615-185/+89
| | | | | | | | The removed patches are now integrated in the upstream kernel. Refresh all patches on top of the new backports release. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* kernel: package rtc-em3027 moduleTomasz Maciej Nowak2019-04-061-0/+18
| | | | | | Support for Microelectronic EM3027 real time clock chip. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* tegra: add new targetTomasz Maciej Nowak2019-04-061-2/+2
| | | | | | | | | | New target introduces initial support for NVIDIA Tegra SoC based devices. It focuses on Tegra 2 CPUs, for successors supporting NEON instruction set the target should be split in two subtargets. This initial commit doesn't create any device image, it's groundwork for further additions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* mac80211: set noscan=1 if sta/adhoc/mesh interfaces are presentFelix Fietkau2019-04-031-1/+10
| | | | | | Fixes channel selection issues and suppresses an unnecessary extra scan Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: improve performance by deferring tx queue selectionFelix Fietkau2019-04-031-0/+183
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mwlwifi: Fix pcie timeout issueKabuli Chana2019-04-011-3/+3
| | | | | | | | | | | | Increase MAX_WAIT_FW_COMPLETE_ITERATIONS to 10000 as before commit e5e0700 to prevent timeout as reported here: #308 (Original OP issue is probably not related though as his post preceeds commit e5e0700). compile/test target mvebu/mamba, rango Signed-off-by: Kabuli Chana <newtownBuild@gmail.com> [commit subject and message tweaks] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: fix missing dependency in 4.14.108Koen Vandeputte2019-03-271-1/+1
| | | | | | | | | | | | The 4.14.108 bump introduced a missing dependency when building specific netfilters. Thsi was not seen as the error does not occur on all targets. Thanks to Jo-Philipp Wich for providing the fix Fixes: af6c86dbe56e ("kernel: bump 4.14 to 4.14.108") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mt76: update to the latest versionFelix Fietkau2019-03-271-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | f2a18f5 mt76x02: introduce mt76x02_beacon.c 91ade88 mt76x02: add hrtimer for pre TBTT for USB 6370485 mt76x02: introduce beacon_ops 37af803 mt76x02u: implement beacon_ops 41d6190 mt76x02: generalize some mmio beaconing functions dcccc04 mt76x02u: add sta_ps 5ac5289 mt76x02: disable HW encryption for group frames e284cc2 mt76x02u: implement pre TBTT work for USB 77e56b8 mt76x02: make beacon slots bigger for USB d4c740f mt76x02u: add mt76_release_buffered_frames 65e6344 mt76: unify set_tim f720e49 mt76x02: enable AP mode for USB cf1838d mt76usb: change mt76u_submit_buf 16b2ccf mt76: remove rx_page_lock e1bfbeb mt76usb: change mt76u_fill_rx_sg arguments e9c0171 mt76usb: use usb_dev private data a4eb5db mt76usb: remove mt76u_buf redundant fileds 3f9b68d mt76usb: move mt76u_buf->done to queue entry 4a366bd mt76usb: remove mt76u_buf and use urb directly 0904bc4 mt76usb: remove MT_RXQ_MAIN queue from mt76u_urb_alloc 42f2899 mt76usb: resue mt76u_urb_alloc for tx 4d4d73a mt76usb: remove unneded sg_init_table 57309c7 mt76usb: allocate urb and sg as linear data 2e89721 mt76usb: remove queue variable from rx_tasklet 30a256a mt76x02: remove extra_tx_headroom (obsoleted by mac8211 skb aligning) ae166b0 Revert "mt76: mt7603: store software PN/IV in wcid" bf6e72d Revert "mt76: mt76x02: store software PN/IV in wcid" a11b673 mt76: fix tx power issues Signed-off-by: Felix Fietkau <nbd@nbd.name>
* linux: Add kmod-sched-act-vlanHauke Mehrtens2019-03-251-0/+16
| | | | | | This allows to configure rules to push or pop vlan headers. Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
* linux: Add kmod-sched-flowerHauke Mehrtens2019-03-251-0/+16
| | | | | | | This allows to classify packets based on a configurable combination of packet keys and masks. Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
* linux: Add kmod-sched-mqprioHauke Mehrtens2019-03-251-0/+16
| | | | | | This adds Multi-queue priority scheduler (MQPRIO). Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
* linux: Add kmod-crxypto-xcbcHauke Mehrtens2019-03-251-0/+12
| | | | | | This can be used for IPsec. Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
* ath10k-ct: Update to 2019-03-25Christian Lamparter2019-03-256-23/+23
| | | | | | | | 2e917efb607f ath10k: Add slow-pci bus work-around, sw-crypt blockack support. cc73ceb0dbc7 ath10k: Fix out-of-tree compile for 4.16 driver. 4b3cf7c20972 ath10k: Improve tx-status reporting. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 19:45:01 +0000