aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel
Commit message (Collapse)AuthorAgeFilesLines
* ath9k: fix dynack in IBSS modeKoen Vandeputte2018-11-065-0/+309
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, dynack was only tested upstream using AP/STA mode. Testing it on IBSS, showed that late-ack detection was broken. This is caused due to dynack using Association Request/Response frames for late-ack detection, which IBSS does not use. Also allowing Authentication frames here solves this. A second issue also got fixed, which was also seen AP/STA mode: When a station was added, the estimated value would be exponentially averaged using 0 as a starting point. This means that on larger distances, the ack timeout was still not high enough before synchronizing would run out of late-ack's for estimation. Fix this by using the initial estimated value as a baseline and only start averaging in the following estimation rounds. Test setup: - 2x identical devices: RB912UAG-5HPnD + 19dB sector - IBSS - 2x2 802.11an (ar9340), HT20, long GI - RSSI's -70 / -71 - Real distance: 23910 meter Results (60s iperf runs): Fixed coverage class 54 (up to 24300m): * 21.5 Mbits/sec Dynack: * 28.9 Mbits/sec Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: Remove dependencies on old kernelsRosen Penev2018-11-016-8/+8
| | | | | | Kernels 4.1 and 4.4 are not part of the tree anymore. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mwlwifi: update to version 10.3.8.0-20181029Kabuli Chana2018-11-011-3/+3
| | | | | | compile / test target mvebu / mamba Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
* kernel: add kmod-usb-serial-mos7840Thomas Fuzeau2018-11-011-0/+15
| | | | | | Enable build of kernel module for mos7840 usb-serial devices. Signed-off-by: Thomas Fuzeau <tfuzeau@loocla.com>
* mt76: update to the latest versionFelix Fietkau2018-10-271-3/+3
| | | | | | fdc63f1 mt76: fix regression in tx status handling Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: Fix dependencies for PCI supportDaniel Engberg2018-10-261-5/+5
| | | | | | | | | | USB support doesn't necessarily mean that there's PCI support available so move that to the drivers which requires PCI support. This applies to the sunxi platform for instance. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> Signed-off-by: Felix Fietkau <nbd@nbd.name> [fix mt76x0e]
* mt76: update to the latest versionFelix Fietkau2018-10-251-3/+3
| | | | | | | | | | | 0b8b15f mt7603: use common mmio mcu struct d612e2e mt76: mt76x02: skip station tx status for non-sta wcid entries d89d84b mt76: mt76x02: only override control->sta on sw-encrypted tx 9d59d2a mt76: add support for reporting tx status with skb ed17ba2 mt7603: use common tx status handling code 14b6c59 mt76x0: use band parameter for LC calibration Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mwlwifi: driver version to 10.3.8.0-20181022Jonathan Lancett2018-10-241-3/+3
| | | | | | | | | | | | Upgrade 88W8997 firmware to 8.4.0.52. Removed unnecessary firmware settings. Added vendor events. Fixed crash problem when module is removed. Modified the code to protect tx queues. Signed-off-by: Jonathan Lancett <j.lancett@ntlworld.com> [tidy commit message] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mt76: update to the latest versionFelix Fietkau2018-10-231-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | d033272 mt76: mt76x0: handle chip specific initval differences 1a2b2dc mt76: usb: fix static tracepoints 11151f4 mt76x0: antenna select corrections dade109 mt76x0: init: simplify mt76x0_init_mac_registers 3c54612 mt76x0: pci: add missing MODULE_FIRMWARE macro 97e0269 mt76x0: mac: remove mt76x0_mac_set_ampdu_factor 5d8c4bf mt76x0: align mt76x0u and mt76x0e fw version d4391ae mt76: move mt76x02_mac_set_short_preamble in mt76x02_mac.c aa6ebf9 mt76: move mt76x02_init_device in mt76x02-lib module a4a08c3 mt76: move mac beacon routines in mt76x02-lib module 6b69650 mt76: move tx beacon routines in mt76x02-lib module 8486047 mt76x0: pci: add pre_tbtt_tasklet support acd4c99 mt76: move mt76x02_sw_scan and mt76x02_sw_scan_complete in mt76x02-lib module 2d736cf mt76: move mt76x02_get_txpower in mt76x02_util.c aa1d6bd mt76: move mt76x02_sta_ps in mt76x02-lib module e684281 mt76: introduce mt76x02_init_beacon_config routine c181d97 mt76x0: pci: enable AP support 3b86d99 mt76: move mt76x02_set_tx_ackto in mt76x02-lib module 41d7ef7 mt76x0: update init vals for MT_TX_PROT registers fe5a149 mt76: move tx protection routines in mt76x02-lib module 5bca2de mt76: move mt76x02_bss_info_changed in mt76x02-lib module d21a835 mt76: move dfs support in mt76x02-lib module ba9d424 mt76x0: pci: add DFS support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: hermes-pcmcia: add missing dependency to kmod-pcmcia-coreHauke Mehrtens2018-10-211-1/+1
| | | | | | This fixes a build problem on x86. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mwlwifi: driver version to 10.3.8.0-20181008Yufei Miao2018-10-201-3/+3
| | | | Signed-off-by: Yufei Miao <myf@myf.cloud>
* kernel/modules: Aosong AM2315/AM2320 IIO kernel module support enabled.Roman Bazalevskiy2018-10-201-0/+13
| | | | Signed-off-by: Roman Bazalevskiy <rvb@rvb.name>
* kernel/modules: add kmod-fou6 packageDeng Qingfang2018-10-201-0/+21
| | | | | | IPv6 support for Foo-over-UDP tunnel Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* gemini: Break out USB to packagesLinus Walleij2018-10-201-0/+11
| | | | | | | | | | | | This creates a new kernel package for the fotg210 host controller and uses that with the gemini to shrink the kernel. The SQ201 needs the USB2 PCI package as well. The build system required me to make kernel_oldconfig beofore it would build without errors so some minor unrelated Kconfig entries are changed. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* mt76: update to the latest versionFelix Fietkau2018-10-181-3/+3
| | | | | | | | | | | b51337a mt76: clean up unused leftover EXPORT_SYMBOLs 383b228 mt76x0: reduce duplication in setting rf bandwidth parameters a1a4528 mt76: mt76x0: handle chip specific initval differences f473340 mt76: usb: fix static tracepoints 3a975b4 mt76x0: antenna select corrections 37c1150 mt76x0: init: simplify mt76x0_init_mac_registers Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version, add mt76x0 firmware, enable mt76x0eFelix Fietkau2018-10-161-3/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 96fa353 mt76: do not store aggregation sequence number for null-data frames c50dca8 mt76x0: print BBP version only for debug ddc9e05 mt76x0: correct RF access via RF_CSR register. 02d2385 mt76: allow to identify bus c438e67 mt76x0: correct RF reg pairs write for PCIe c83abb8 mt76x0: use bus helper to identify rf access method 9c272ff mt76x0: phy: fix bank check in mt76x0_rf_csr_{wr,rr} 1945d57 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mcu.c 214eab7 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_phy.c 29bc2ae mt76: use mt76x02_dev instead of mt76_dev in mt76x02_util.c 08ecb5f mt76: use mt76x02_dev instead of mt76_dev in mt76x02_usb_mcu.c fd9b2b0 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mac.c f37bd25 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_txrx.c 48950cb mt76: use mt76x02_dev instead of mt76_dev in mt76x02_eeprom.c 06276cc mt76x0: pci: report firmware version using ethtool 72546ed mt76x0: pci: add missing mac80211 callbacks 4de98cd mt76: disable ldpc coding for mt76x0 devices f0951c2 mt76x0: pci: add mt76x0_register_device in mt76x0e_register_device 4f3685e mt76: reserve enough room for USB tx skbs 5e6907f mt76x0: remove dma.h acfc5a9 mt76x0: pci: fix set external PA I/O current 2b79bb7 mt76: mt76x0e: another fix for the external PA current setting 8a0acfd mt76x0: phy: fix restore phase in mt76x0_phy_recalibrate_after_assoc e9e949b mt76x0: phy: remove channel parameter from mt76x0_phy_set_chan_bbp_params 1775717 mt76: move mt76x02_phy_set_bw in mt76x02-lib module f82134f mt76: move mt76x02_phy_set_band in mt76x02-lib module 3eaa34f mt76x0: pci: rename mt76x0_phy_calibrate 7269fb4 mt76x0: pci: introduce mt76x0_phy_calirate routine a514b75 mt76x0: phy: update set_channel for mt76x0e devices 62a1bc5 mt76x0: eeprom: introduce mt76x0_tssi_enabled routine a48481d mt76x0: phy: add phy/vco temperature compensation cc34ce9 mt76: move rssi_gain_thresh routines in mt76x02-lib module eaf9751 mt76: move mt76x02_phy_adjust_vga_gain in mt76/mt76x02_phy.c 2715e7c mt76: introduce mt76x02_init_agc_gain routine 87fcb31 mt76x0: phy: align channel gain logic to mt76x2 one 98f8ef7 mt76x0: phy: do not run calibration during channel switch cf859ad mt76x2: align mt76x2 and mt76x2u firmware 1f3f767 mt76x2u: align channel gain logic to mt76x2 one d1c1454 treewide: Replace more open-coded allocation size multiplications bcbecd2 mt76x0: phy: use proper name convention b6694e6 mt76x0: phy: simplify rf configuration routines da129c9 mt76x0: phy: improve code readability in initvals_phy.h eab7ab1 mt76x0: pci: add get_survey support 9e493f7 mt76: move mt76x02_mac_work routine in mt76x02-lib module ecec6ba mt76: move mt76x02_debugfs in mt76x02-lib module 4f3b608 mt76x0: use shared debugfs implementation 6aae25b mt76x0: use mt76x02_mac_work as stats handler b228a45 mt76x2u: introduce mac workqueue support 4671af4 mt76x0: phy: unify calibration between mt76x0u and mt76x0e 5ed28f3 mt76x0: do not perform MCU calibration for MT7630 9b844da add mt7610e firmware Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: move mt76x2e firmware to kmod-mt76x2-common and use it for mt76x2uFelix Fietkau2018-10-141-1/+7
| | | | | | USB and PCIe devices can run the same firmware Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix A-MSDU packet handling with TCP retransmissionFelix Fietkau2018-10-112-1/+32
| | | | | | | Improves local TCP throughput and fixes use-after-free bugs that could lead to crashes. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: Update to 29-09-2018Robert Marko2018-10-113-102/+4
| | | | | | | | | | | | | | | | | Update ath10k-ct to be able to drop 210-ath10k-fix-recent-bandwidth-conversion-bug.patch as its upstream. b9989fbd5d6e ath10k-ct: Add upstream patch to fix peer rate reporting. ac9224344dbf ath10k-ct: Support sending custom frames with no-ack flag. bc938bc2021e ath10k-ct: Support sending pkts with specific rate on 10.4 firmware. Runtime tested on: - GL-iNet GL-B1300 - Mikrotik RB912 + QCA9882 Signed-off-by: Robert Marko <robimarko@gmail.com> [Added list of all changes from previous version + add own test device] Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* netfilter: add missing dependency for kernel 4.14Koen Vandeputte2018-10-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since kernel 4.14.75 commit ("netfilter: xt_cluster: add dependency on conntrack module") a dependency is required on kmod-nf-conntrack. It seems this was already present for kmod-ipt-clusterip but not yet for kmod-ipt-cluster Add it fixing a build error when including kmod-ipt-cluster: Package kmod-ipt-cluster is missing dependencies for the following libraries: nf_conntrack.ko modules/netfilter.mk:665: recipe for target '/mnt/ramdisk/koen/firmware/builds/openwrt/bin/targets/cns3xxx/generic/packages/kmod-ipt-cluster_4.14.75-1_arm_mpcore_vfp.ipk' failed make[3]: *** [/mnt/ramdisk/koen/firmware/builds/openwrt/bin/targets/cns3xxx/generic/packages/kmod-ipt-cluster_4.14.75-1_arm_mpcore_vfp.ipk] Error 1 make[3]: Leaving directory '/mnt/ramdisk/koen/firmware/builds/openwrt/package/kernel/linux' Command exited with non-zero status 2 time: package/kernel/linux/compile#1.80#0.05#2.07 package/Makefile:107: recipe for target 'package/kernel/linux/compile' failed make[2]: *** [package/kernel/linux/compile] Error 2 make[2]: Leaving directory '/mnt/ramdisk/koen/firmware/builds/openwrt' package/Makefile:103: recipe for target '/mnt/ramdisk/koen/firmware/builds/openwrt/staging_dir/target-arm_mpcore+vfp_musl_eabi/stamp/.package_compile' failed make[1]: *** [/mnt/ramdisk/koen/firmware/builds/openwrt/staging_dir/target-arm_mpcore+vfp_musl_eabi/stamp/.package_compile] Error 2 make[1]: Leaving directory '/mnt/ramdisk/koen/firmware/builds/openwrt' /mnt/ramdisk/koen/firmware/builds/openwrt/include/toplevel.mk:216: recipe for target 'world' failed make: *** [world] Error 2 Fixes: f983956a8b72 ("kernel: bump 4.14 to 4.14.75") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v4.14.75&id=b969656b46626a674232c0eadf92a394b89df07c
* mt76: fix typo in kmod-mt76x0u package descriptionFelix Fietkau2018-10-091-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: Use @KERNEL alias instead of hardlinkDaniel Engberg2018-10-071-1/+1
| | | | | | Use @KERNEL alias provided by toolchain instead of relying on a specific site. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* mt76: fix dependenciesFelix Fietkau2018-10-061-1/+2
| | | | | | | - make kmod-mt76-core hidden - select kmod-mt76-core and kmod-usb-core from mt76-usb Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-10-061-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 053de5c mt76x0: pci: add mt76x0e_cleanup routine c6b1926 mt76x2: move mt76x2 source files to mt76x2 folder 6afb1b8 mt76: fix header guard macro define names 05c7f24 mt76: fix frag length allocation for usb 6856ef6 mt76: usb: fix hw initialization sequence 3d43146 mt76x0: usb: stop cal/mac workqueues at hw stop bef08cc mt76: move mt76x02_tx_get_max_txpwr_adj in mt76x02_util.c cd42111 mt76: add get_tx_txpwr_adj function pointer to mt76_driver_ops c49a3ae mt76: move mt76x02_mac_write_txwi in mt76x02-lib module 4bae980 mt76: usb: use mt76x02u_tx_prepare_skb to fill txwi e0847b4 mt76x0: init: remove unnecessary configurations e802b5c mt76: move mt76x02_phy_get_min_avg_rssi in mt76x02_phy.c 2742847 mt76: move mt76x02_rx_get_sta and mt76x02_rx_get_sta_wcid in mt76x02_util.h c26f9fd mt76x0: mac: use sta ewma estimation for rssi tracking 330fbe3 mt76x0: remove unused variable in mt76x0_dev a56efc5 mt76x0: remove hw_atomic_mutex mutex in mt76x0_dev abd1daa mt76x2: move mt76x2_dev in mt76x02_util.h d5d1e59 mt76x0: merge mt76x0_dev in mt76x02_dev e236ba5 mt76: move mt76x02_mac_process_rx in mt76x02-lib module 724d547 mt76: unify rxwi parsing between mt76x2 and mt76x0 drivers ec3d829 mt76: move mt76x02_tx in mt76x02-lib module 159f767 mt76: move txrx shared routines in mt76x02_txrx.c 9c874cd mt76: rename mt76x02_util.h in mt76x02.h fd9174f mt76x2: remove leftover function declatarions 608708a mt76: move tpc routines in mt76x02-lib module 45b8f5e mt76: move mt76x02_tx_prepare_skb in mt76x02_txrx.c 9a39521 mt76: usb: move mt76x02u_tx_complete_skb in mt76x02_usb_core.c 3770c54 mt76: move mt76x02_mac_poll_tx_status in mt76x02-lib moudle 9730290 mt76: move mt76x02_tx_complete in mt76x02-lib module 99e0486 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mmio.c 3d2cfe3 mt76: move tx_tasklet management in mt76x02-lib moudle e61671e mt76: move irq handler in mt76x02-lib moudle d533f13 mt76x0: pci: report firmware version using ethtool Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: move marvell packaging code to marvell.mkFelix Fietkau2018-10-062-87/+91
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: move intel packaging code to intel.mkFelix Fietkau2018-10-062-200/+201
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: move realtek packaging code to realtek.mkFelix Fietkau2018-10-062-169/+171
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: move broadcom packaging code to broadcom.mkFelix Fietkau2018-10-062-484/+489
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: move atheros/qca packaging code to ath.mkFelix Fietkau2018-10-062-270/+278
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: move rt2x00 packaging code to ralink.mkFelix Fietkau2018-10-062-203/+209
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: remove duplicated lines for building packages, use PKG_DRIVERS insteadFelix Fietkau2018-10-061-78/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kmod-sched-cake: bump to 20181002Kevin Darbyshire-Bryant2018-10-022-26/+4
| | | | | | | | Revert "Add workaround for wrong skb->mac_len values after splitting GSO" Remove our local patch which did the same thing. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kmod-sched-cake: don't gso fixup on fixed kernelsKevin Darbyshire-Bryant2018-10-022-1/+23
| | | | | | | | Kernels 4.14.73 & 4.9.140 include the gso fixup fix, so cake doesn't need to do it. Let's not waste cpu cycles by doing it in cake which could be really important on cpu constrained devices. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mt76: update to the latest version, fixes mt76x2 beacon issueFelix Fietkau2018-10-011-3/+3
| | | | | | 94d4445 mt76: mt76x2: fix multi-interface beacon configuration Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: Add missing config option for NFSDv4Hauke Mehrtens2018-09-291-0/+1
| | | | | | | | This configuration option is not set when building the layerscape/armv8_64b target. Fixes: 92aa21497b2 ("kernel: build support for NFSv4 in nfsd") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: build support for NFSv4 in nfsdW. Michael Petullo2018-09-291-1/+5
| | | | Signed-off-by: W. Michael Petullo <mike@flyn.org>
* samsung: Add missing dependencies to kmod-of-mdioHauke Mehrtens2018-09-291-2/+2
| | | | | | | The samsung target builds of_mdio.ko as a module, add the needed dependency to it. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: fix management frame protection issue with mt76 (and possibly ↵Felix Fietkau2018-09-291-0/+25
| | | | | | | | | other drivers) Software crypto wasn't working for management frames because the flag indicating management frame crypto was missing Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to latest, adds mt76x0u and mt76x2u support, fixes a mt7603 ↵Felix Fietkau2018-09-291-5/+110
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | powersave issue d220f43 Revert "mt76x2: reset HW before probe" 0853d79 Revert "mt76x2: add functions for setting extended MAC address registers" 8ba17b1 Revert "mt76: use a per rx queue page fragment cache" 3f0ac35 mt76x2: init: disable APCLI by default 38014de mt76x2: remove unnecessary break in mt76x2_mac_process_tx_rate() fbf4791 mt76x2: fix TXD_INFO bitmask definition d00c616 mt76x2: fix mrr idx/count estimation in mt76x2_mac_fill_tx_status() 0d42d22 mt76: introduce mt76_{incr,decr} utility routines 0f6379a mt76x2: dfs: add sw event ring buffer df8071f mt76x2: dfs: add sw pattern detector 016df9c mt76x2: debugfs: add sw pulse statistics to dfs debugfs a6915cb mt76: move MT_TXD_INFO, MT_MCU_MSG and MT_RX_FCE_INFO defs in dma.h 911e6aa mt76x2: move mt76x2_fw_header and mt76x2_patch_header definitions in mcu.h c55d29b mt76x2: move utility routines in mt76x2.h d08ea82 mt76x2: introduce mt76x2_init_device routine 6a1e809 mt76x2: move interface_modes definition in mt76x2_init 5aa0972 mt76x2: introduce mt76x2_mac_load_tx_status routine 730b86c mt76x2: add napi struct to mt76_rx_poll_complete/mt76_rx_complete signatures 1ab6cea mt76x2: add buffer len to mt76x2_mac_write_txwi signature 7ac6dac mt76: rename mt76_tx_queue_skb in mt76_dma_tx_queue_skb 66f3949 mt76: introduce tx_queue_skb function pointer in mt76_bus_ops d099694 mt76: introduce mt76x2-common module 9bf1aa1 mt76: add mt76x2_tx_common to mt76x2-common module 29f960a mt76: add mt76x2_mac_common to mt76x2-common module 8f568ce mt76: add mt76x2_init_common to mt76x2-common module 61c4c61 mt76: add mt76x2_common to mt76x2-common module 264edbe mt76: add mt76x2_phy_common to mt76x2-common module 7625508 mt76: move mt76x2_debugfs in mt76-common module 99a3afa mt76: add usb support to mt76 layer 25b4598 mt76: add driver code for MT76x2u based devices 253c443 mt76x0: core files 6ed7bc2 mt76x0: mac files a2c1068 mt76x0: usb files c332481 mt76x0: mcu files 0d7d9ed mt76x0: phy files 5d50834 mt76x0: init files c633654 mt76x0: eeprom files 18a9d4e mt76x0: trace and debugfs files 7395bba mt76x0: dma and tx files 08dec4c mt76x0: main file 5892efd mt76: add more states e176af8 mt76: Kconfig and Makefile for mt76x0 driver 5c38d48 mt76x0: disable HW before probe 2f37f60 mt76x0: load firmware from mediatek subdir 1388140 mt76x0: rename mt76_* functions 1cb65d5 mt76x0: rename trace symbols 4fe2b16 mt76x0: correct type for eeprom gain value 560b643 mt76x0: perform mt76x0_mac_set_ampdu_factor d1645aa mt76x0: Remove VLA usage f8a0da4 mt76: Fix comparisons with invalid hardware key index 884eca5 mt76: unify wait_for_mac fc636f0 mt76: rename mt76x2_regs.h 493feb9 mt76: merge mt76x0/regs.h into mt76x02_regs.h a238099 mt76: create new mt76x02-lib module for common mt76x{0,2} code 55bceee mt76: unify mac_get_key_info f6c19cf mt76: add helpers for register access with mt76_dev struct 34a95b8 mt76: unify mac_shared_key_setup 4286255 mt76: unify mt76x02_mac_wcid_set_key 732535e mt76: unify mac_wcid_setup 51b74ac mt76: use mac_wcid_set_drop in mt76x0 1b4a98f mt76x0: use mt76_wcid_free in mt76x0 fcf2130 mt76: unify mt76x02_vif struct 1f35eb5 mt76: unify sta structure part 1 086ea9f mt76: unify sta structure part 2 caff9a2 mt76x0: initalize custom tx queues 7362da7 mt76x0: use mt76x02_sta and mt76x02_tx_status 3a03aa1 mt76: move mt76_reg_pair definition in mt76.h a853831 mt76: split __mt76u_mcu_send_msg and mt76u_mcu_send_msg routines a80564f mt76: move mt76x2u_mcu_deinit routine in mt76-usb module ac92496 mt76: add multiple regs read support to usb_mcu layer 8b0e08f mt76x0: use mt76u_init for bus initialization ef32115 mt76x0: remove mt76x0_vendor_reset routine 949858f mt76x0: remove mt76x0_vendor_single_wr routine 21ecb9b mt76x0: remove mt76x0_mcu_msg_alloc routine 4cfeebb mt76x0: use shared mt76 usb mcu completion 2600712 mt76x0: remove mt76x0_complete_urb routine 0bd0fe8 mt76x0: remove mt76x0_vendor_request routine f88bde2 mt76x0: remove unused mt76x0_wait_asic_ready routine 7eca333 mt76x0: use mt76u_mcu_send_msg utility routine to send fw cmds 8fedb79 mt76x0: remove unused mt76x0_mcu structure e8fe4f3 mt76x0: use mt76u_mcu_fw_send_data for fw uploading b9c46a8 mt76x0: remove unused routines for usb_buff alloc/free ed3366d mt76: Enable NL80211_EXT_FEATURE_CQM_RSSI_LIST 9867146 mt76: verify evt type in usb mcu response 82a8c8a mt76: move wcid fields to common mt76_dev struct f409c6b mt76: unify sta_add / sta_remove d972ddd mt76: pratially unify add_interface f8f5788 mt76x0: fix wrong usage of wcid_mask in remove_interface 380f89c mt76: unify ampdu_action 8c7098e mt76: unify set_key 2a20cfc mt76x0: remove empty sta_notify a690333 mt76: unify AC to hw queue mapping 4453308 mt76: unify conf_tx d9352cb mt76x0: remove vif_mask 196720e mt76: unify remove_interface 57c3e89 mt76: unify add_interface 91fce2f mt76: unify sta_rate_tbl_update and related helpers 3977f48 mt76: unify txwi and rxwi structures 41e0403 mt76: unify load_tx_status 4674502 mt76: unify send_tx_status and related helpers 02816b0 mt76: use mt76_rx_status in mt76x0 0a17b1e mt76: unify mac_process_rate 8aac175 mt76x0: reserve enough space in mac80211 81a655a mt76: unify {insert/remove}_hdr_pad d8f7d2e mt76: partially unify filling txwi fields 3533718 mt76x2: change mt76x2_tx_complete routine signature 469aeb1 mt76: move mt76x2_tx_complete routine in mt76x02-lib module 87f138b mt76: move mt76x2u_remove_dma_hdr in mt76x02-lib module c87a7e8 mt76: move mt76x2u_tx_complete_skb in mt76x02-lib moudule b85e072 mt76: move mt76_qsel definition in dma.h 53b3c5a mt76: move mt76x2u_set_txinfo in mt76x02-lib module 34cec25 mt76x0: introduce mt76x0_tx_prepare_skb routine 6c5ac15 mt76: move mt76x2u_tx_status_data in mt76x02-lib module 0ba8261 mt76x0: init mt76_driver_ops callbacks 2615090 mt76x0: use mt76_alloc_device for device allocation 3c40eaf mt76x0: disable usb rx bulk aggregation 746edd7 mt76x0: mark device as running in mt76x0_start dd77785 mt76x0: simplify mt76_mac_process_rx signature 3739601 mt76x0: add mt76x0_queue_rx_skb routine 062aaa8 mt76x0: unify tx/rx datapath with mt76x2u driver 85f171f mt76x0: stop stat workqueue at hw stop 8c68115 mt76x0: set max fragments size ac02f5c mt76x0: remove unused dma.c source file 964df72 mt76x0: remove unused stat work_queue afb34b8 mt76x0: remove unused {tx/rx}_queue definitions a4fd791 mt76x0: remove unused mt76x0_tx_status routine 0e92ff6 mt76x0: remove unused endpoint definitions 8340e19 mt76x0: remove unused stat_work bfbbf05 mt76x0: enable per-sta tx queueing a8fcaa3 mt76x0: init hw capabilities 6a9b73c mt76x0: trim rx skb to proper length aa0c279 mt76: remove unused MT76_MORE_STATS state 873d792 mt76x0: remove mt76x0_stop_hardware routine 246a216 mt76: move mt76 rate definitions in mt76x02-lib module aae3fb8 mt76x0: alloc mcu buffers first in mt76x0_mcu_cmd_init 3c693a1 mt76x0: fix memory leak during hw probe 98faee1 mt76x0: move stop related routines in mt76x0_mac_stop d07c02a mt76x0: move mt76x0_init_hardware in mt76x0_register_device 12c01f4 mt76x0: do not free/alloc buffers during suspend/resume 297cc34 mt76x0: remove has_{2,5}ghz fields of mt76x0_eeprom_params 2d77a9a mt76x0: use mt76_register_device for device registration bb57912 mt76x0: inital split between pci and usb 3e241f3 mt76x0: remove unused mt76x0_wcid a8c61c2 mt76x0: remove some usb specific code from mt76x0_register_device e4a7387 mt76x0: make device allocation bus neutral 6da4642 mt76x0: run vco calibration for each channel configuration 1ac35da mt76: move mt76x0 and mt76x2 mcu shared defs in mt76x02_mcu.h 4d43674 mt76: add mt76_mcu_ops data structure for mcu related pointers 479b153 mt76: add usb implementation of {wr,rd}_rp e525b01 mt76: add rd_rp and wr_rp to bus_ops/mcu_ops f5590b0 mt76: usb: use common helpers for mcu_alloc_msg()/mcu_send_msg() d2773ce mt76: usb: move mt76x02 mcu code in mt76x02-usb module 6337ffb mt76: usb: move mt76u_skb_dma_info in mt76x02_usb_core.c 5a79f17 mt76x02: move TXD/RXD/MCU definitions in mt76x02_dma.h 88ece32 mt76x02: add static qualifier to mt76x02_remove_dma_hdr d63b72f mt76x0: remove unused mt76x0_burst_read_regs 0aef244 mt76x0: remove mt76x0_burst_write_regs() 14aaf87 mt76: usb: remove skb check in mt76x{0,2}u mcu routines 46ba81c mt76x2: use mt76_dev instead of mt76x2_dev in mt76x2_tx_queue_mcu dbc4442 mt76x2: remove leftover mt76u_buf data structure in mt76x2_mcu 26909cd mt76: introduce mmio data structure in mt76_dev 425e7e0 mt76: move __iomem regs in mt76_mmio 28cfe61 mt76x2: use mt76_dev instead of mt76x2_dev in mt76x2_mcu_msg_send a1e27de mt76x2: use common helpers for mcu_alloc_msg()/mcu_send_msg() 90b1eac mt76: unify firmware header between mt76x0 and mt76x2 a0cbd4b mt76: move mt76{0,2} mcu shared code in mt76x02_mcu.c a633c61 mt76x2: move mt76x2 mcu shared code in mt76x2_mcu_common.c ce91108 mt76: move shared mcu_calibrate routine in mt76x02-lib module 2b3b4df mt76x2: move mt76x2_phy_tssi_compensate in mt76x2-common module 39a380a mt76: use a per rx queue page fragment cache b4a2141 mt76x2u: run device cleanup routine if resume fails df11092 treewide: Use struct_size() for kmalloc()-family 788becd treewide: devm_kzalloc() -> devm_kcalloc() 971005a mt76x2u: Add support for Alfa AWUS036ACM 878b0bd mt76: fix debugfs_simple_attr.cocci warnings 44ed12d wireless: Use octal not symbolic permissions a6f80ef build: make building 76x2e and 7603e optional 1047913 mt76x0: usb: move firmware loading to usb.c 26b20f8 mt76x0: remove mcu source file 44145f3 mt76x0: remove unused usb header file d56be99 mt76x0: usb: remove mt76_fw definition 3733445 mt76x2: fix tx power configuration for VHT mcs 9 0aced80 mt76x0: pci: add mt7650 PCI ID 35e88c0 mt76x0: pci: add fw uploading routine 3991afa mt76: move seq_put_array in mt76-core module 6cf6fba mt76: add stbc entries to mt76_rate_power 4451f99 mt76: move common eeprom definitions in mt76x02-lib module c9100cb mt76: move eeprom utility routines in mt76x02_eeprom.h 611b8c7 mt76: move mt76x2_eeprom_get in mt76x02_eeprom.h b59ed56 mt76: move mt76x02_mac_setaddr in mt76x02-lib module 844daeb mt76: move mt76x2_get_efuse_data in mt76x02-lib module 7556cb9 mt76: move mt76x2_ext_pa_enabled routine in mt76x02_eeprom.c 19d7853 mt76x0: remove mt76x0_set_country_reg routine ba7a3da mt76: add mt76x02_get_rx_gain and mt76x02_get_lna_gain utility routines 35b0a2a mt76x0: unify lna_gain parsing 2a470db mt76x0: unify rssi_offset parsing fe89537 mt76x0: unify temperature offset parsing 76bc22f mt76x0: unify freq offset parsing bedeb3d mt76: move mt76x02_eeprom_parse_hw_cap in mt76x02-lib module 1adcd39 mt76x0: unify parse hw capabilities df23620 mt76: move mt76x2_tssi_enabled in mt76x02_eeprom.h ebca136 mt76: usb: remove WARN_ON in mt76u_get_rx_entry_len cf8f750 mt76: fix return value of mt76x02_wait_for_mac f802bd5 mt76: move mt76_rate_power in mt76_dev 4b6093c mt76: add mt76x02_phy_set_txpower utility routine c206b8c mt76: move rate_txpower handler in mt76 debugfs 4da6fd3 mt76: move mt76x02_rate_power_val in mt76x02-lib module fb3806d mt76x0: remove mt76x0_phy_set_tx_power and mt76x0_extra_power_over_mac 730db56 mt76x0: remove eeprom dependency from mt76x0_set_tx_power_per_rate 212fa2c mt76x0: remove eeprom dependency from mt76x0_get_power_info 280e452 mt76x0: use shared debugfs implementation 21fddc3 mt76x0: phy: introduce mt76x0_phy_set_txpower routine b0d85d4 mt76: include linux/module.h in files using MODULE_* a47083b mt76: report firmware version using ethtool dc66f7c mt76: usb: make rx page_frag_cache access atomic 09d696b mt76: use skb_pad() instead of __skb_pad() e8d7890 mt76x0: add quirk to disable 2.4GHz band for Archer T1U e76fe15 mt76x2: disable WLAN core before probe 41c552f mt76x0: work around cflags issue in compat layer for trace.h b95bc8a mt76x0: use mt76_poll in mt76x0_set_wlan_state 3a3554a mt76: move wait_for_wpdma in mt76x02_dma.h 0527feb mt76: add mt76x02_dma_enable/mt76x02_dma_disable utility routines a8fda4b mt76: move mt76x02_set_irq_mask in mt76x02_mmio.c 11e3028 mt76: move queue initialization in mt76x02_mmio.c 5a29094 mt76: move mt76x02_beacon_offset in mt76x02_util.c 5f1d0ff mt76: mmio: add implementation of wr_rp and rd_rp 47eee35 mt76: move mt76x2_wait_for_bbp in mt76x02-lib module 7cc4be7 mt76x0: update initvals to latest version of vendor driver e1a2179 mt76x0: pci: move mcu code in pci_mcu.c 886f6fc mt76x0: usb: move mcu code in usb_mcu.c c7b28f4 mt76x0: use mt76x02 utility routines in mt76x0 init code 005d40a mt76x0: init: remove duplicated initialization 94776fe mt76x0: init: remove MT_PBF_SYS_CTRL configuration in mt76x0_reset_csr_bbp 5bb8339 mt76x0: init rx filter in mt76x0_init_hardware fe1379a mt76: add mt76x02_mac_start routine da982d3 mt76x0: usb: move initialization code in usb.c 22be43e mt76x0: pci: add hw initialization at bootstrap 15a50e1 mt76x0: phy: set antenna parameter according to wireless band 5d2a331 mt76: move set_{tx,rx}_path routines in mt76x02-lib module 8050d71 mt76x0: add ieee80211_ops ops pointer to mt76x0_alloc_device signature c240904 mt76x0: pci: add mt76x0e_{start/stop} callbacks b50f38a mt76x0: eeprom: load eeprom data from mtd by default fb5bae0 mt76x0: usb: move mt76x0u_tx_prepare_skb in usb.c 4047e1f move mt7603 source files to mt7603/ 14f70f4 mt7603: fix wcid for frames sent via drv_tx 542f17e mt76: fix handling ps-poll frames 7464cc9 mt76: check aggregation sequence number for frames sent via drv_tx Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: fix bandwidth conversion bugHauke Mehrtens2018-09-281-0/+98
| | | | | | | | | | This backports a patch from the upstream kernel which was also shipped previously in mac80211. This fixes the following warning: WARNING: CPU: 0 PID: 2881 at backports-4.19-rc5-1/net/wireless/util.c:1146 cfg80211_calculate_bitrate+0x238/0x348 [cfg80211] invalid rate bw=2, mcs=0, nss=1 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-ct: adds leds supportAnsuel Smith2018-09-283-0/+663
| | | | | | This rework and adds patch from ath10k source to make leds work also on candela source Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* mac80211: fix ipw200 build with kernel < 4.10Hauke Mehrtens2018-09-281-0/+34
| | | | | | | The __change_mtu() function is only compiled when CPTCFG_IPW2200_PROMISCUOUS is set, more it to the general area. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Use backports-4.19-rc5-1.tar.xzHauke Mehrtens2018-09-277-14/+349
| | | | | | | | | | This is an official release with some minor changes compared to the unofficial 4.19-rc4-1 we used before. * added bcma and ssb again, which is removed in OpenWrt * fix to build with kernel 4.19 * other minor fixes not relevant for Openwrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-ct: update to version ath10k-4.16Hauke Mehrtens2018-09-264-9/+219
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: fix compile warning in 986-rt2x00-add-TX-LOFT-calibration.patchHauke Mehrtens2018-09-261-1/+1
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Add patches which were added laterHauke Mehrtens2018-09-2618-677/+1
| | | | | | | | These patches were added after the new matches structure for the mac80211 package was created. All the deleted patches are already integrated in kernel 4.19-rc4. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: update to version based on 4.19-rc4Hauke Mehrtens2018-09-26105-1092/+403
| | | | | | | | | | | | This updates mac80211 to backports based on kernel 4.19-rc4. I plan to integrate all the patches which are in this tar into upstream backports soon. I used the backports generated from this code: https://github.com/hauke/backports/commits/wip2 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: rt2x00: add experimental patches from Stanislaw GruszkaDaniel Golle2018-09-265-0/+1067
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: remove obsolete patchDaniel Golle2018-09-261-136/+0
| | | | | | | | According to Stanislaw Gruszka the patch 600-23-rt2x00-rt2800mmio-add-a-workaround-for-spurious-TX_F.patch should be dropped. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: add TX LOFT calibrationTomislav Požega2018-09-261-0/+1005
| | | | | | Add TX LOFT calibration from mtk driver. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-02 21:44:09 +0000