aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel
Commit message (Collapse)AuthorAgeFilesLines
...
* mac80211: ath11k: sync with ath-nextRobert Marko2023-02-2220-4/+1616
| | | | | | | | | | | | Synchronize the ath11k backports with the current ath-next tree. This backports several memory leak issues, PCI IRQ fixup, peer add locking fix as well as IPQ5018 support, though IPQ5018 support is unused for now. This allows to easily backport further fixes as cherry picking them has started requiring manual conflict resolution. Signed-off-by: Robert Marko <robimarko@gmail.com>
* mac80211: fix mesh issues and improve performanceFelix Fietkau2023-02-206-1/+939
| | | | | | | fix forwarding received mesh a-msdu packets add fast xmit support for mesh to improve performance Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: kmod-ramoops: Include pstore console supportBrian Norris2023-02-181-1/+2
| | | | | | | | | | | | | | | | | Pstore ramoops support is useful even when there isn't an explicit panic/crash. We can log all kernel messages via a "console", and then retrieve them in the event of some non-kernel-panic reset (e.g., watchdog). Since the buffer memory is already reserved, there isn't much overhead to doing this. The new console files will show up as: /sys/fs/pstore/console-ramoops-N Cc: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* kernel: can: fix MCP251x CAN controller module autoloadTim Harvey2023-02-181-1/+1
| | | | | | Fix autoload module name for can-mcp251x kmod. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* netfilter: add kmod-nf-conntrackAviana Cruz2023-02-181-0/+23
| | | | | | | | | There have been some demands for the `ct count` expression, like https://forum.openwrt.org/t/22-03-2-unable-to-use-ct-count-nft-rules/146680. This adds the required kernel modules for the expression to work. Signed-off-by: Aviana Cruz <gwencroft@proton.me>
* kernel: modules: package Aquantia PHY driverRobert Marko2023-02-151-0/+16
| | | | | | | | | | | | | Package the Aquantia AQR PHY driver as kmod. This enables using the Aquantia driver with hwmon support on targets where hwmon is not compiled-in. Currently, in case when AQR driver is compiled-in but hwmon core is not hwmon code in AQR driver will not get compiled because of macro IS_REACHABLE(CONFIG_HWMON) evaluating to false. Signed-off-by: Robert Marko <robimarko@gmail.com>
* mac80211: add fixes for receiving A-MSDU packets on mesh interfacesFelix Fietkau2023-02-138-34/+1141
| | | | | | | | The standard defines the A-MSDU header length field differently for mesh compared to other modes. Deal with this accordingly and work around broken implementations (e.g. ath10k, ath11k). Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: kmod-fs-ntfs3: fix typoXu Yiming2023-02-091-1/+1
| | | | | | Fix typo that mistaken the description of ntfs3 for fuse. Signed-off-by: Xu Yiming <xuyiming.open@outlook.com>
* kernel: modules: add lkdtm moduleBrian Norris2023-02-031-0/+16
| | | | | | Useful for debugging panic/error handling, crash logging, and more. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* ltq-vdsl-vr9: fix upstream MINEFTRJan Hoffmann2023-02-032-1/+23
| | | | | | | | The upstream value read from the device seems to already be in bits per second, so there is no need to multiply by 1000 again (which for typical values causes an overflow of the 32-bit unsigned integer). Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* mt76: update PKG_SOURCE_HASHFelix Fietkau2023-02-021-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: fix typo in PKG_SOURCE_DATEFelix Fietkau2023-02-021-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version, import WED related mtk_eth_soc patchesFelix Fietkau2023-02-021-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 6c256218e59e wifi: mt76: dma: use napi_build_skb 679254c50f27 mt7915: add CONFIG_MT76_LEDS to cflags 15b9dd6b1b6a wifi: mt76: mt7915: call mt7915_mcu_set_thermal_throttling() only after init_work 8e5c21fe7c5c wifi: mt76: mt7915: rework mt7915_mcu_set_thermal_throttling 87cb74fe42d9 wifi: mt76: mt7915: rework mt7915_thermal_temp_store() c6f24b83eba5 wifi: mt76: mt7915: add error message in mt7915_thermal_set_cur_throttle_state() 99e96b89ee4d wifi: mt76: mt7915: add chip id condition in mt7915_check_eeprom() 833cd420480f wifi: mt76: mt7921: fix channel switch fail in monitor mode f1f8bae6092d wifi: mt76: mt7921: add ack signal support f47087a6dd62 wifi: mt76: mt7996: fix chainmask calculation in mt7996_set_antenna() 2f3b0acc1588 wifi: mt76: mt7996: update register for CFEND_RATE 7e9540dcbd70 wifi: mt76: mt7996: do not hardcode vht beamform cap a37e427d0959 wifi: mt76: connac: fix POWER_CTRL command name typo 98aa346042bd wifi: mt76: mt7915: remove BW160 and BW80+80 support 94fed6a43541 wifi: mt76: mt7921: fix invalid remain_on_channel duration 3c162384d80a wifi: mt76: introduce mt76_queue_is_wed_rx utility routine a409a9454587 wifi: mt76: mt7915: fix memory leak in mt7915_mcu_exit 8b27ecd3a684 wifi: mt76: mt7996: fix memory leak in mt7996_mcu_exit 683760461dd0 wifi: mt76: dma: free rx_head in mt76_dma_rx_cleanup 0c750cf08f85 wifi: mt76: dma: fix memory leak running mt76_dma_tx_cleanup 5de9ae29bea2 wifi: mt76: mt7915: avoid mcu_restart function pointer dad96dd3e62d wifi: mt76: mt7603: avoid mcu_restart function pointer 19d36dd9c8ea wifi: mt76: mt7615: avoid mcu_restart function pointer 6fe2c2383d3d wifi: mt76: mt7921: avoid mcu_restart function pointer 9df89143bf71 wifi: mt76: mt7915: get rid of wed rx_buf_ring page_frag_cache 8d51d11760cb wifi: mt76: fix switch default case in mt7996_reverse_frag0_hdr_trans 0d8057dbd51c wifi: mt76: mt7921u: add support for Comfast CF-952AX ddbf4e933d54 wifi: mt76: mt7915: set sku initial value to zero 06a8904e954e wifi: mt76: mt7915: wed: enable red per-band token drop 724a337caef9 wifi: mt76: mt7915: fix WED TxS reporting 747ca943a5bb wifi: mt76: add flexible polling wait-interval support 133d7859977a wifi: mt76: mt7921: reduce polling time in pmctrl 5fe319a0550e wifi: mt76: add memory barrier to SDIO queue kick 822f060b9d19 wifi: mt76: mt7921: fix rx filter incorrect by drv/fw inconsistent c6794954a723 wifi: mt76: mt7915: fix memory leak in mt7915_mmio_wed_init_rx_buf 9686cd7cc65c wifi: mt76: switch to page_pool allocator 04da4eaa8235 wifi: mt76: enable page_pool stats 1af4a911ebcb wifi: mt76: mt7915: release rxwi in mt7915_wed_release_rx_buf e8c10835cf06 wifi: mt76: fix compile error without CONFIG_PAGE_POOL_STATS 0cf0ede7cc42 net: ethernet: mtk_wed: add reset to rx_ring_setup callback 715b3ed9708a net: ethernet: mtk_wed: add reset to tx_ring_setup callback 9107381d0ff3 wifi: mt76: mt7921: fix error code of return in mt7921_acpi_read 36d2a5bf7802 wifi: mt76: mt7996: rely on mt76_connac2_mac_tx_rate_val c67f57d2cda2 wifi: mt76: dma: add reset to mt76_dma_wed_setup signature 3dace36e2941 wifi: mt76: dma: reset wed queues in mt76_dma_rx_reset 4b229d2da562 wifi: mt76: mt7915: add mt7915 wed reset callbacks f83958376085 wifi: mt76: mt7915: complete wed reset support 321edbb414dc wifi: mt76: mt7996: rely on mt76_connac_txp_common structure bdb7dc38a6d1 wifi: mt76: mt7996: rely on mt76_connac_txp_skb_unmap 8688756305c6 wifi: mt76: mt7996: rely on mt76_connac_tx_complete_skb fbf986dbd4c0 wifi: mt76: mt7996: rely on mt76_connac2_mac_decode_he_radiotap adc556cbce37 wifi: mt76: mt7996: avoid mcu_restart function pointer 5eb4e2303be4 wifi: mt76: remove __mt76_mcu_restart macro e7a61c5f70f5 wifi: mt76: add EHT phy type b375845abc10 wifi: mt76: connac: add CMD_CBW_320MHZ 68b17a243332 wifi: mt76: connac: add helpers for EHT capability 02ec1f61b3a2 wifi: mt76: connac: add cmd id related to EHT support 9209294cd81b wifi: mt76: increase wcid size to 1088 5e85136c9b2f wifi: mt76: add EHT rate stats for ethtool a171f672fdeb wifi: mt76: mt7996: add variants support eda8fd62c105 wifi: mt76: mt7996: add helpers for wtbl and interface limit 4a5a9f4cdc3b wifi: mt76: mt7996: rework capability init 06b73c155680 wifi: mt76: mt7996: add EHT capability init ae71a1b8294f wifi: mt76: mt7996: add support for EHT rate report 65bdfae2991d wifi: mt76: mt7996: enable EHT support in firmware b2360d59747c wifi: mt76: mt7996: add EHT beamforming support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport napi_build_skb for 5.10Felix Fietkau2023-01-291-0/+11
| | | | | | It is needed for an upcoming mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add kmod-lib-842Tony Butler2023-01-281-0/+22
| | | | | | | | | | "842" is a compression scheme and this is the software implementation which is too slow to really use beyond a proof of concept. It can be selected in ZRAM, ZSWAP, or `fs/pstore`, and is here for completeness. In general you need a Power8 or better with 842-in-hardware for it to be fast, but other 842-accelerators are emerging. Signed-off-by: Tony Butler <spudz76@gmail.com>
* mac80211: use 802.11ax iw modesDavid Bauer2023-01-281-3/+3
| | | | | | | | | | This adds missing HE modes to mac80211_prepare_ht_modes. Previously mesh without wpa_supplicant would be initialized with 802.11g /NO-HT only, as this method did not parse channel bandwidth for HE operation. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: add new ltq-vdsl-vr11 driverMartin Schiller2023-01-166-0/+349
| | | | | | | | | | | | | | This uses version 4.23.1 of the drv_dsl_cpe_api package from the Intel UGW 8.5.2.10 for the VRX518. Signed-off-by: Martin Schiller <ms.3headeddevs@gmail.com> [rebased and updated for kernel 5.10] Signed-off-by: Jan Hoffmann <jan@3e8.eu> [update to 4.23.1, switch to tag tarball, update patches] Signed-off-by: Andre Heider <a.heider@gmail.com> [added fix for elapsed time and upstream MINEFTR] Signed-off-by: Jan Hoffmann <jan@3e8.eu> Signed-off-by: Andre Heider <a.heider@gmail.com>
* kernel: add new ltq-vdsl-vr11-mei driverMartin Schiller2023-01-168-0/+278
| | | | | | | | | | | | | | This uses version 1.11.1 of the drv_mei_cpe package from the Intel UGW 8.5.2.10 for the VRX518. Signed-off-by: Martin Schiller <ms.3headeddevs@gmail.com> [updated for kernel 5.10] Signed-off-by: Jan Hoffmann <jan@3e8.eu> [update to 1.11.1, switch to tag tarball, update patches] Signed-off-by: Andre Heider <a.heider@gmail.com> [update for kernel 5.15] Signed-off-by: Jan Hoffmann <jan@3e8.eu> Signed-off-by: Andre Heider <a.heider@gmail.com>
* ltq-ifxos: enable for ipq40xxAndre Heider2023-01-161-5/+3
| | | | | | This is required for the MEI CPE driver. Signed-off-by: Andre Heider <a.heider@gmail.com>
* kernel: add Intel/Lantiq VRX518 TC driverMartin Schiller2023-01-166-0/+3174
| | | | | | | | | | | | | This driver version is also included in Intel UGW 8.5.2.10. Signed-off-by: Martin Schiller <ms.3headeddevs@gmail.com> [updated for kernel 5.10] Signed-off-by: Jan Hoffmann <jan@3e8.eu> [update to 1.5.12.4, switch to tag tarball] Signed-off-by: Andre Heider <a.heider@gmail.com> [add working software data path] Signed-off-by: Jan Hoffmann <jan@3e8.eu> Signed-off-by: Andre Heider <a.heider@gmail.com>
* kernel: add Intel/Lantiq VRX518 EP driverMartin Schiller2023-01-1616-0/+4870
| | | | | | | | | | | | | This driver was picked from the Intel UGW 8.5.2. Signed-off-by: Martin Schiller <ms.3headeddevs@gmail.com> [updated for kernel 5.10] Signed-off-by: Jan Hoffmann <jan@3e8.eu> [update to 8.5.2] Signed-off-by: Andre Heider <a.heider@gmail.com> [fix masking interrupts and add locking] Signed-off-by: Jan Hoffmann <jan@3e8.eu> Signed-off-by: Andre Heider <a.heider@gmail.com>
* kernel: add Qualcomm NSS dataplane ethernet driverRobert Marko2023-01-1616-0/+917
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Qualcomm NSS-DP is as its name says Qualcomms ethernet driver for the NSS subsystem (Networking subsystem) built-into various Qualcomm SoCs. It has 2 modes of operation: * Without NSS FW and rest of code required for offloading This is the one that we will use as the amount of kernel patching required for NSS offloading and the fact that its not upstreamable at all makes it unusable for us. Driver in this mode is rather basic, it currently only offers NAPI GRO (Added by us as part of the fixup) and basically relies on the powerfull CPU to get good throughput. * With NSS FW and rest of code required for offloading In this mode, driver just registers the interfaces and hooks them into NSS-ECM to allow offloading. This mode is not viable for use in OpenWrt due to reasons already described above. This driver is required for ipq807x to have wired networking until a better one is available, so lets add the fixed-up version for 5.15 for now. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: add Qualcomm SSDK driverRobert Marko2023-01-1612-0/+657
| | | | | | | | | | | | | | | | Qualcomm SSDK is driver for Qualcomm Atheros switches and PHY-s. It is quite complicated and used by rest of the Qualcomm SDK stack for anything switch or PHY related. It is required for IPQ807x support as currently, there is no better driver for the built-in switch or UNIPHY. So, lets add the fixed-up version that supports kernel 5.15 for use on ipq807x target until a better driver is available. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Robert Marko <robimarko@gmail.com>
* mac80211: add ath11k AHB supportRobert Marko2023-01-164-2/+116
| | | | | | | | | | | | | | | | | This is the follow up to the PCI support commit now providing support for AHB variant as well, though currently only for ipq807x as that is only OpenWrt supported SoC ath11k supports as well. Currently, we are disabling coldboot calibration on ipq807x as it does not work, there is a remoteproc bug that makes it come late out of reset so disable coldboot until that is fixed. Also, as ath11k is quite memory hungry, we are introducing a config option to use the limits for 512MB of RAM, similar to what QCA does downstream but in way simpler and cleaner way so that 512MB save some RAM. 512MB profile is also set as the default for now. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq807x: add Qualcomm Atheros IPQ807x targetRobert Marko2023-01-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Qualcomm Atheros IPQ807x is a modern WiSoC featuring: * Quad Core ARMv8 Cortex A-53 * @ 2.2 GHz (IPQ8072A/4A/6A/8A) Codename Hawkeye * @ 1.4 GHz (IPQ8070A/1A) Codename Acorn * Dual Band simultaneaous IEEE 802.11ax * 5G: 8x8/80 or 4x4/160MHz (IPQ8074A/8A) * 5G: 4x4/80 or 2x2/160MHz (IPQ8071A/2A/6A) * 5G: 2x2/80MHz (IPQ8070A) * 2G: 4x4/40MHz (IPQ8072A/4A/6A/8A) * 2G: 2x2/40MHz (IPQ8070A/1A) * 1x PSGMII via QCA8072/5 (Max 5x 1GbE ports) * 2x SGMII/USXGMII (1/2.5/5/10 GbE) on Hawkeye * 2x SGMII/USXGMII (1/2.5/5 GbE) on Acorn * DDR3L/4 32/16 bit up to 2400MT/s * SDIO 3.0/SD card 3.0/eMMC 5.1 * Dual USB 3.0 * One PCIe Gen2.1 and one PCIe Gen3.0 port (Single lane) * Parallel NAND (ONFI)/LCD * 6x QUP BLSP SPI/I2C/UART * I2S, PCM, and TDMA * HW PWM * 1.8V configurable GPIO * Companion PMP8074 PMIC via SPMI (GPIOS, RTC etc) Note that only v2 SOC models aka the ones ending with A suffix are supported, v1 models do not comply to the final 802.11ax and have lower clocks, lack the Gen3 PCIe etc. SoC itself has two UBI32 cores for the NSS offloading system, however currently no offloading is supported. Signed-off-by: Robert Marko <robimarko@gmail.com>
* mac80211: ath11k: hack for multiple card supportRobert Marko2023-01-163-1/+302
| | | | | | | | | | | | This is a temporary workaround for supporting multiple cards or AHB+PCI. There is ongoing upstream work to properly support this based of advertised FW features, but that is still ongoing. This is only supported on QCN9074 cards due to FW limitation, so HW ID is checked in order to prevent breaking QCA6390 and other popular cards. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq40xx: add support for Linksys WHW03 V2Vincent Tremblay2023-01-151-0/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SOC: Qualcomm IPQ4019 WiFi 1: QCA4019 IEEE 802.11b/g/n WiFi 2: QCA4019 IEEE 802.11a/n/ac WiFi 3: QCA8888 IEEE 802.11a/n/ac Bluetooth: Qualcomm CSR8811 (A12U) Zigbee: Silicon Labs EM3581 NCP + Skyworks SE2432L Ethernet: Qualcomm Atheros QCA8072 (2-port) Flash 1: Mactronix MX30LF4G18AC-XKI RAM (NAND): SK hynix H5TC4G63CFR-PBA (512MB) LED Controller: NXP PCA9633 (I2C) Buttons: Single reset button (GPIO). - The three WiFis were fully tested and are configured with the same settings as in the vendor firmware. - The specific board files were submitted to the ATH10k mailing list but I'm still waiting for a reply. They can be removed once they are approved upstream. - Two ethernet ports are accessible on the device. By default one is configured as WAN and the other one is LAN. They are fully working. Bluetooth: ======== - Fully working with the following caveats: - RFKILL need to be enabled in the kernel. - An older version of bluez is needed as bccmd is needed to configure the chip. Zigbee: ====== - The spidev device is available in the /dev directory. - GPIOs are configured the same way as in the vendor firmware. - Tests are on-going. I am working on getting access to the Silicon Labs stack to validate that it is fully working. Installation: ========= The squash-factory image can be installed via the Linksys Web UI: 1. Open "http://192.168.1.1/ca" (Change the IP with the IP of your device). 2. Login with your admin password. 3. To enter into the support mode, click on the "CA" link and the bottom of the page. 4. Open the "Connectivity" menu and upload the squash-factory image with the "Choose file" button. 5. Click start. Ignore all the prompts and warnings by click "yes" in all the popups. The device uses a dual partition mechanism. The device automatically revert to the previous partition after 3 failed boot attempts. If you want to force the previous firmware to load, you can turn off and then turn on the device for 2 seconds, 3 times in a row. It can also be done via TFTP: 1. Setup a local TFTP server and configure its IP to 192.168.1.100. 2. Rename your image to "nodes_v2.img" and put it to the TFTP root of your server. 3. Connect to the device through the serial console. 4. Power on device and press enter when prompted to drop into U-Boot. 5. Flash the partition of your choice by typing "run flashimg" or "run flashimg2". 6. Once flashed, enter "reset" to reboot the device. Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Vincent Tremblay <vincent@vtremblay.dev>
* mac80211: ath11k: fix monitor bringupRobert Marko2023-01-122-0/+240
| | | | | | | | | | Currently, ath11k will crash the crash if we try to bringup the monitor mode interface. Luckily, it has already been fixed upstream, so backport the patches fixing it. Fixes: 93ae4353cdf6 ("mac80211: add ath11k PCI support") Signed-off-by: Robert Marko <robimarko@gmail.com>
* ksmbd: Fix ZDI-CAN-18259Hauke Mehrtens2023-01-113-1/+100
| | | | | | | | | | | This fixes a security problem in ksmbd. It currently has the ZDI-CAN-18259 ID assigned, but no CVE yet. Backported from: https://github.com/cifsd-team/ksmbd/commit/8824b7af409f51f1316e92e9887c2fd48c0b26d6 https://github.com/cifsd-team/ksmbd/commit/cc4f3b5a6ab4693aba94a45cc073188df4d67175 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* rtl8812au-ct: Ignore address errorsHauke Mehrtens2023-01-091-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GCC 12.2.0 shows these error messages: ```` rtl8812au-ct-2021-11-07-39df5596/core/rtw_sta_mgt.c: In function 'rtw_mfree_stainfo': rtl8812au-ct-2021-11-07-39df5596/core/rtw_sta_mgt.c:210:24: error: the comparison will always evaluate as 'true' for the address of 'lock' will never be NULL [-Werror=address] 210 | if(&psta->lock != NULL) | ^~ In file included from rtl8812au-ct-2021-11-07-39df5596/include/drv_types.h:109, from rtl8812au-ct-2021-11-07-39df5596/core/rtw_sta_mgt.c:22: rtl8812au-ct-2021-11-07-39df5596/include/sta_info.h:95:17: note: 'lock' declared here 95 | _lock lock; | ^~~~ ```` ```` CC [M] rtl8812au-ct-2021-11-07-39df5596/os_dep/linux/ioctl_cfg80211.o rtl8812au-ct-2021-11-07-39df5596/os_dep/linux/ioctl_cfg80211.c: In function 'cfg80211_rtw_scan': rtl8812au-ct-2021-11-07-39df5596/os_dep/linux/ioctl_cfg80211.c:2176:32: warning: the comparison will always evaluate as 'true' for the address of 'ssid' will never be NULL [-Waddress] 2176 | if(ssids->ssid != NULL | ^~ In file included from rtl8812au-ct-2021-11-07-39df5596/include/osdep_service_linux.h:88, from rtl8812au-ct-2021-11-07-39df5596/include/osdep_service.h:41, from rtl8812au-ct-2021-11-07-39df5596/include/drv_types.h:32, from rtl8812au-ct-2021-11-07-39df5596/os_dep/linux/ioctl_cfg80211.c:22: /home/hauke/openwrt/openwrt/staging_dir/target-mips_24kc_musl/usr/include/mac80211/net/cfg80211.h:2364:12: note: 'ssid' declared here 2364 | u8 ssid[IEEE80211_MAX_SSID_LEN]; | ^~~~ ```` ```` CC [M] rtl8812au-ct-2021-11-07-39df5596/hal/OUTSRC/phydm_debug.o rtl8812au-ct-2021-11-07-39df5596/hal/OUTSRC/phydm_debug.c: In function 'phydm_cmd_parser': rtl8812au-ct-2021-11-07-39df5596/hal/OUTSRC/phydm_debug.c:873:28: warning: the comparison will always evaluate as 'true' for the pointer operand in 'input + ((sizetype)i + 1) * 16' must not be NULL [-Waddress] 873 | if(input[i+1]) { | ^~~~~ rtl8812au-ct-2021-11-07-39df5596/hal/OUTSRC/phydm_debug.c:894:28: warning: the comparison will always evaluate as 'true' for the pointer operand in 'input + ((sizetype)i + 1) * 16' must not be NULL [-Waddress] 894 | if(input[i+1]) { | ^~~~~ ```` This one was only seen on the rockchip/armv8 target: ```` CC [M] rtl8812au-ct-2021-11-07-39df5596/core/rtw_br_ext.o In function '__nat25_add_pppoe_tag', inlined from 'nat25_db_handle' at rtl8812au-ct-2021-11-07-39df5596/core/rtw_br_ext.c:909:10: rtl8812au-ct-2021-11-07-39df5596/core/rtw_br_ext.c:118:9: error: 'memcpy' reading between 2052 and 9220 bytes from a region of size 40 [-Werror=stringop-overread] 118 | memcpy((unsigned char *)ph->tag, tag, data_len); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ rtl8812au-ct-2021-11-07-39df5596/core/rtw_br_ext.c: In function 'nat25_db_handle': rtl8812au-ct-2021-11-07-39df5596/core/rtw_br_ext.c:878:63: note: source object 'tag_buf' of size 40 878 | unsigned char tag_buf[40]; | ^~~~~~~ ```` Most of them are looking like real errors to me, but some fixes need a deeper understanding of the driver and probably bigger changes to the driver. Ignore these error messages for now. It would be nice if someone would fix them. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mt76: add stand-alone MT7622 firmware packageShiji Yang2023-01-071-4/+16
| | | | | | | | | Add a separate firmware package to avoid installing the MT7615 firmware on all MT7622 target devices by default. Now we only add MT7615 firmware packages for devices that use MT7615E. This commit also removes the explicit dependency on kmod-mt7615e to refine the package dependency. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* mt76: add stand-alone MT7915 firmware packageShiji Yang2023-01-071-1/+8
| | | | | | | | | The mt7915e driver supports MT7915, MT7916 and MT7986 chips. And Only MT7915 series chips need the MT7915 firmware. To save storage, extract them from the common code package and create a new package to provide the firmware. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* mt76: remove unnecessary dependency from mt7915eShiji Yang2023-01-071-1/+1
| | | | | | | | | The kmod-mt7615-common package does not contain any code that related to mt7915e Wi-Fi6 driver, so remove it. Tested on ramips/mt7621: SIM SIMAX1800T Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* mac80211: fix receiving multicast packets on multiple sta interfacesFelix Fietkau2022-12-301-26/+30
| | | | | | Also fix MLO sta sdata link initialization Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: Do not build brcmsmac on bcm47xx_legacyHauke Mehrtens2022-12-241-1/+1
| | | | | | | | | brcmsmac needs bcma. bcma is build into the kernel for the other bcm47xx subtargets, but not for the legacy target because it only uses ssb. We could build bcma as a module for bcm47xx_legacy, but none of these old devices uses a wifi card supported by brcsmac. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mt76: update to the latest versionFelix Fietkau2022-12-221-3/+3
| | | | | | | a03ef0aab93e wifi: mt76: mt7921: fix deadlock in mt7921_abort_roc 5b509e80384a wifi: mt76: dma: fix a regression in adding rx buffers Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add ath11k PCI supportRobert Marko2022-12-1920-4/+1718
| | | | | | | | | | | | | | | | | | | | | | ath11k is the upstream driver for Qualcomm 802.11ax radios, both for the internal AHB and PCI based cards. This commit does however only provide PCI support while AHB will follow but its SoC specific so it will require an OpenWrt target first. It differs a bit from ath10k as it requires stuff like QRTR, MHI and QMI helpers. PCI variant requires qrtr-mhi and mhi-bus which backports do provide, however we are dropping those in a patch as they will conflict with support for the AHB variant as that one requires qrtr-smd which in turn requires RPMSG and GLINK and its not feasable to provide those in backports as they are really SoC specific. QRTR and MHI in kernel 5.10 are not usable and backporting the changes is not easy as they have changed drastically from 5.10 to 5.15 ath11k will only be available on targets that use kernel 5.15. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: package QRTR supportRobert Marko2022-12-191-0/+64
| | | | | | | | | | | | | | | | | QRTR is Qualcomm IPC router protocol and ath11k requires it for both AHB and PCI support, so package it as a kernel module so it can be added as a dependency to the ath11k module. Only kernel 5.15 is currently supported due to various things missing in 5.10 whose backporting is out of scope for this patch. SMD, TUN and MHI variants are packaged. SMD variant depends on the ipq807x target as it has dependency on the RPMSG drivers which are Qualcomm and SoC specific anyway. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: Make use of KERNEL_MAKEHauke Mehrtens2022-12-1710-31/+13
| | | | | | | | | | | | Make use of KERNEL_MAKE in kernel packages were easily possible. This moves some more code to common places and reduces the number of lines. It is defined like this: KERNEL_MAKE = $(MAKE) $(KERNEL_MAKEOPTS) KERNEL_MAKEOPTS = -C $(LINUX_DIR) $(KERNEL_MAKE_FLAGS) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add driver package for WS2812B LEDsChuanhong Guo2022-12-163-0/+268
| | | | | | | Two WS2812B (NeoPixel) clones are used in Xiaomi Redmi AX6000 as indicator lights. Add a driver for controlling it using SPI MOSI. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mac80211: fix a regression in processing management frames for AP VLAN ↵Felix Fietkau2022-12-161-21/+22
| | | | | | | | interfaces Fixes re-assoc of WDS stations Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: work around a race condition on detecting a phy while bringing it upFelix Fietkau2022-12-161-0/+4
| | | | | | | | When reloading modules and running wifi, a phy can sometimes be renamed while in the middle of a hotplug call that tries to detect new phys This can lead to bogus wifi-device sections being created Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix uninitialized variable in rx->link/link_sta initialization fixFelix Fietkau2022-12-161-23/+15
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix connecting multiple wds stations to an APFelix Fietkau2022-12-142-1/+26
| | | | | | A faulty check prevented the AP_VLAN interfaces from being brought up Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add a fix for a crash in __ieee80211_rx_h_amsduFelix Fietkau2022-12-131-0/+413
| | | | | | Fix initialization of rx->link_sta Signed-off-by: Felix Fietkau <nbd@nbd.name>
* treewide: remove DRIVER_11N_SUPPORTAndre Heider2022-12-1311-21/+21
| | | | | | | | | | | | hostapd's compile time option CONFIG_IEEE80211N was removed almost 3 years ago, 80.211n/HT is always included since then. Noticed because `hostapd -v11n` confusingly returned an error. See hostapd's commit: f3bcd69603 "Remove CONFIG_IEEE80211N build option" Signed-off-by: Andre Heider <a.heider@gmail.com>
* ath9k: add missing dependency on random coreFelix Fietkau2022-12-131-1/+1
| | | | | Reported-by: Hartmut Birr <e9hack@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: modules/lib-lz4: add lz4hc_compressTony Butler2022-12-112-1/+7
| | | | | | | | | enable option `CONFIG_CRYPTO_LZ4HC` to match default kernel config this only adds the `lz4hc_compress` module, and has no effect on the `lz4_decompress` module which already supports any flavor Signed-off-by: Tony Butler <spudz76@gmail.com>
* rtl8812au-ct: fix build with newer backports cfg80211 apiFelix Fietkau2022-12-111-0/+56
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2022-12-102-1611/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ec46d7486ab9 sync with upstream 2575de3aea33 wifi: mt76: mt7921: introduce chanctx support 473cebb3c3e1 wifi: mt76: fix bandwidth 80MHz link fail in 6GHz band de3e77227f62 wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices f0c191a9f6cd wifi: mt76: mt7996: add missing argument in mt7996_queue_rx_skb() d3838a52df62 wifi: mt76: mt7996: enable use_cts_prot support 98492dff3bec wifi: mt76: mt7996: enable ack signal support 2a41e7a82f86 wifi: mt76: mt7996: add support to configure spatial reuse parameter set 194cb3392829 mt76: mt7915: add missing of_node_put() f91d6f3b73ac wifi: mt76: mt7921s: fix slab-out-of-bounds access in sdio host 1ce4970d799f wifi: mt76: mt7915: fix mt7915_rate_txpower_get() resource leaks 379f3fc0fc43 wifi: mt76: mt7996: fix insecure data handling of mt7996_mcu_ie_countdown() 233c272f0f86 wifi: mt76: mt7996: fix insecure data handling of mt7996_mcu_rx_radar_detected() 5616c4cc1d5d wifi: mt76: mt7996: fix integer handling issue of mt7996_rf_regval_set() f9598e6d4c2c wifi: mt76: mt7915: split mcu chan_mib array up b252d94bd763 wifi: mt76: mt7915: check return value before accessing free_block_num f1cc3696d725 wifi: mt76: mt7996: check return value before accessing free_block_num b94ba58fa698 wifi: mt76: mt7915: check the correctness of event data 35843a1670c0 wifi: mt76: mt7915: drop always true condition of __mt7915_reg_addr() 01a256c1dc41 wifi: mt76: mt7996: drop always true condition of __mt7996_reg_addr() 5185bbab8953 wifi: mt76: mt7996: fix endianness warning in mt7996_mcu_sta_he_tlv eeb6949c4d06 wifi: mt76: mt76x0: fix oob access in mt76x0_phy_get_target_power 063823aba978 wifi: mt76: mt7921: add support to update fw capability with MTFG table a44109267e4e wifi: mt76: mt7996: fix unintended sign extension of mt7996_hw_queue_read() be5dbb781068 wifi: mt76: mt7915: fix unintended sign extension of mt7915_hw_queue_read() adf9042b6f63 wifi: mt76: fix coverity uninit_use_in_call in mt76_connac2_reverse_frag0_hdr_trans() 551201379efe wifi: mt76: move leds field in leds struct 14fbb6d6e85e wifi: mt76: move leds struct in mt76_phy 81edc468fc62 wifi: mt76: mt7915: enable per-phy led support bbad827e447f wifi: mt76: mt7615: enable per-phy led support 8e7e7e52fc09 wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails 95c66d651133 wifi: mt76: handle possible mt76_rx_token_consume failures 52d04463a66e wifi: mt76: dma: rely on queue page_frag_cache for wed rx queues 7fae1de12ae7 wifi: mt76: mt7921: resource leaks at mt7921_check_offload_capability() Signed-off-by: Felix Fietkau <nbd@nbd.name>