aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel
Commit message (Collapse)AuthorAgeFilesLines
* kernel: modules: package Marvell gigE PHY driverDaniel Golle2022-11-151-0/+34
| | | | | | | | | | | | | | | | | | | Some copper SFP modules come with Marvell's 88E1xxx PHY and need this module to function. Package it, so users can easily install this PHY driver and use e.g. FINISAR CORP. FCLF-8521-3-HC SFP. Without marvell PHY driver: sfp sfp2: module FINISAR CORP. FCLF-8521-3-HC rev A sn XXXXXXX dc XXXXXX mt7530 mdio-bus:1f sfp2: validation with support 0000000,00000000,00000000 failed: -22 sfp sfp2: sfp_add_phy failed: -22 With marvell PHY driver: sfp sfp2: module FINISAR CORP. FCLF-8521-3-HC rev A sn XXXXXXX dc XXXXXX mt7530 mdio-bus:1f sfp2: switched to inband/sgmii link mode mt7530 mdio-bus:1f sfp2: PHY [i2c:sfp2:16] driver [Marvell 88E1111] (irq=POLL) mt7530 mdio-bus:1f sfp2: Link is Up - 1Gbps/Full - flow control rx/tx Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: add kmod-hwmon-sht3x supportUwe Kleine-König2022-11-131-0/+15
| | | | | | | The driver supports the temperature and humidity sensors chips SHT3x and STS3x by Sensirion. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
* mt76: move the mt7921 firmware to its own packageAndre Heider2022-11-121-3/+9
| | | | | | | | | It's not just required for the PCI version, but for USB and presumably SDIO as well. Tested with 0e8d:7961 Comfast CF-953AX (MT7921AU). Signed-off-by: Andre Heider <a.heider@gmail.com>
* mt76: update to the latest versionFelix Fietkau2022-11-121-3/+3
| | | | | | 4bf2607362fc wifi: mt76: fix dbdc number of spatial streams limit Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: support for Realtek USB bluetooth devicesQuintin Hill2022-11-121-2/+3
| | | | | | | | | | | USB adaptors with the RTL8761B chipset are cheap and readily available but so far support is missing in Openwrt. Enable the relevant kernel options and add a module to the kmod-bluetooth package. Increases size of kmod-bluetooth ipk from 279140 bytes to 285320 bytes on my ath79 build. Tested on a WNDR3700v4 with rtl8761bu firmware. Signed-off-by: Quintin Hill <stuff@quintin.me.uk>
* mt76: update to the latest versionFelix Fietkau2022-11-112-16/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 8cc34bdc9ef0 wifi: mt76: mt7921: set MT_DRV_AMSDU_OFFLOAD for USB/SDIO 2182de50a37c wifi: mt76: fix receiving LLC packets on mt7615/mt7915 269df4b01f27 wifi: mt76: fix rx checksum offload on mt7615/mt7915/mt7921 fa4ace8e3b58 ieee80211: add EHT 1K aggregation definitions 176df35e7e80 wifi: mt76: mt7915: improve accuracy of time_busy calculation 94b335fa88e1 wifi: mt76: mt7915: add ack signal support 3365c129f73c wifi: mt76: mt7915: enable use_cts_prot support ad9bd2ba361e wifi: mt76: mt7615: enable use_cts_prot support 68bdcccb0aa7 wifi: mt76: mt7915: fix reporting of TX AGGR histogram 242fece4323f wifi: mt76: mt7921: fix reporting of TX AGGR histogram 75003c69a9bd wifi: mt76: mt7615: rely on mt7615_phy in mt7615_mac_reset_counters 65c70a32f1cf wifi: mt76: move aggr_stats array in mt76_phy b1ddf8bec058 wifi: mt76: mt7915: rework mt7915_dma_reset() 1ad31c3f76f4 wifi: mt76: mt7915: enable full system reset support 6b0668de7a53 wifi: mt76: mt7915: add full system reset into debugfs a5e48378d2a6 wifi: mt76: mt7915: enable coredump support 1e9060420c92 wifi: mt76: mt7915: fix incorrect tx path number configuration 0263711ba362 wifi: mt76: mt7915: fix antenna selection with bad eeprom. 869815e5ef86 wifi: mt76: mt7915: Fix chainmask calculation on mt7915 DBDC fc410557b7e1 wifi: mt76: mt7915: Fix VHT beamforming capabilities with DBDC daa30a31cf70 wifi: mt76: mt7915: don't claim 160MHz support with mt7915 DBDC 80bcecdbc2ff wifi: mt76: connac: update nss calculation in txs 465219c1f56c wifi: mt76: do not run mt76u_status_worker if the device is not running c7db15903e5c wifi: mt76: connac: add mt76_connac_mcu_uni_set_chctx 7a2b1a13b1b0 wifi: mt76: mt7921: add chanctx parameter to mt76_connac_mcu_uni_add_bss signature dece6921e606 wifi: mt76: mt7921: add unified ROC cmd/event support d4da182389b6 wifi: mt76: mt7921: drop ieee80211_[start, stop]_queues in driver 0c3ef988d8dc wifi: mt76: connac: accept hw scan request at a time c477225fd10e mt7615: update cr4 firmware to 20190415154149 413a4bf39513 mt76: mt7915: fix unused-but-set variable f5034abea899 mt76: mt7915: fix format string a9ac73ed8275 wifi: mt76: mt7615: increase eeprom size for mt7663 4a27f23fc4f2 linux-firmware: update firmware for MT7921 WiFi device Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix mesh airtime link metric estimationFelix Fietkau2022-11-101-0/+36
| | | | | | fix reading the per-packet rate on devices with firmware rate control Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: remove old legacy legacy driversFelix Fietkau2022-11-0910-834/+5
| | | | | | | | | | | Get rid of drivers that are either limited to 802.11b/g or don't even support cfg80211/mac80211. Most of these are either limited to boards that we don't even support anymore because of firmware size, or were only used for custom hacks by a really small number of users in the past. Let's get rid of those to reduce the maintenance effort and the number of useless packages Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: add firmware package for mt7916Andrew Powers-Holmes2022-11-091-0/+16
| | | | | | | | | | Add kernel package 'mt7916-firmware' with firmware files for MT7916E devices. These share the same driver as the MT7915 chipset, but use their own firmware. Tested using a pair of AsiaRF AW7916-NPD cards. Signed-off-by: Andrew Powers-Holmes <aholmes@omnom.net>
* mac80211: subsys: add tags to upstreamed patchesNick Hainke2022-11-0932-0/+0
| | | | | | Some patches were already upstreamed. Signed-off-by: Nick Hainke <vincent@systemli.org>
* mac80211: rt2x00: add tags to upstreamed patchesNick Hainke2022-11-0916-0/+0
| | | | | | Some patches are already upstreamed. Signed-off-by: Nick Hainke <vincent@systemli.org>
* mac80211: brcm: add tag to upstreamed patchNick Hainke2022-11-091-0/+0
| | | | | | Add tag to upstreamed patch. Signed-off-by: Nick Hainke <vincent@systemli.org>
* mac80211: ath9k: add tag to upstreamed patchNick Hainke2022-11-091-0/+0
| | | | | | Add tag to upstreamed patch. Signed-off-by: Nick Hainke <vincent@systemli.org>
* mac80211: ath10k: add tags for upstreamed patchesNick Hainke2022-11-096-0/+0
| | | | | | Add tags to already upstreamed patches. Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: improve description of NTFS kernel packagesRafał Miłecki2022-11-081-4/+8
| | | | | | This helps choosing the right NTFS driver from two available options. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ltq-tapi: Fix compile with kernel 5.15Hauke Mehrtens2022-11-051-0/+14
| | | | | | | | | | Do not use find_vpid(), but get_task_pid() to get the pid from pThrCntrl->tid. This is now a ponter to struct task_struct instead of an integer. This fixes the build of ltq-tapi with lantiq/xway. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ltq-ifxos: Fix compile with ltq-tapiHauke Mehrtens2022-11-051-0/+11
| | | | | | | Do not include asm/irq.h directly, but include linux/interrupt.h instead. This fixes the build of ltq-tapi with lantiq/xway. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: further cleanup of xfrm[4|6]_mode*Martin Schiller2022-11-051-6/+0
| | | | | | | | | In my commit da5c45f4d886 ("kernel: remove handling of xfrm[4|6]_mode_* modules") I missed a few default config options and description entries. Those should be gone as well. Fixes: da5c45f4d886 ("kernel: remove handling of xfrm[4|6]_mode_* modules") Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* kernel: sort filesystems symbols alphabeticallyRafał Miłecki2022-11-021-35/+36
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: Add kmod-drm-ttm-helperHauke Mehrtens2022-11-011-2/+16
| | | | | | | | | | | | Add a package for drm_ttm_helper.ko. CONFIG_DRM_TTM_HELPER is compiled into the kernel on armvirt/64, x86/64, x86/generic and x86/legacy because also some DRM drivers are compiled into the kernel. On x86/geode it is not compiled into the kernel, but kmod-drm-amdgpu and kmod-drm-radeon depend on it. This fixes the x86/geode build. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: remove handling of xfrm[4|6]_mode_* modulesMartin Schiller2022-10-311-12/+2
| | | | | | | | | | | | | | | For kernel versions before 5.2, the required IPsec modes have to be enabled explicitly (they are built-in for newer kernels). Commit 1556ed155a9a ("kernel: mode_beet mode_transport mode_tunnel xfram modules") tried to handle this, but it does not really work. Since we don't support these kernel versions anymore and the code is also broken, let's remove it. Signed-off-by: Martin Schiller <ms@dev.tdt.de> [Remove old generic config options too] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: replace gpio-mcp23s08 with pinctrl-mcp23s08*Florian Eckert2022-10-301-10/+43
| | | | | | | | | | | | The kernel module gpio-mcp23s08 has been replaced by the new pinctrl-mcp23s08* kernel modules. There are now 3 kernel modules for this device - Common module for both I2C and SPI kmod-pinctrl-mcp23s08 - Module for I2C kmod-pinctrl-mcp23s08-i2c - Module for SPI kmod-pinctrl-mcp23s08-spi Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* mac80211: fix masking nested A-MSDU support for meshAndre Heider2022-10-251-1/+1
| | | | | | | | | CONFIG_MAC80211_MESH isn't defined for this package, rendering the patch useless. Match protecting the access of sta_info.mesh with the very same define declaring it. Fixes 45109f69a6 "mac80211: fix compile error when mesh is disabled" Signed-off-by: Andre Heider <a.heider@gmail.com>
* mac80211: use KERNEL_MAKEOPTS instead of KERNEL_MAKE_FLAGSFelix Fietkau2022-10-241-2/+2
| | | | | | Fixes issues with disabling stack validation on non-linux systems Signed-off-by: Felix Fietkau <nbd@nbd.name>
* button-hotplug: simplify buildFelix Fietkau2022-10-243-19/+2
| | | | | | Remove unnecessary kconfig junk Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: Update to version 5.15.74-1Hauke Mehrtens2022-10-2329-2258/+36
| | | | | | | | This updates mac80211 to version 5.15.74-1 which is based on kernel 5.15.74. The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ksmbd: update to 3.4.6Nick Hainke2022-10-232-71/+2
| | | | | | | | | | Release Announcement: https://github.com/cifsd-team/ksmbd/releases/tag/3.4.6 Remove upstreamed: - 10-fix-build-on-kernel-5.15.52-or-higher.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: ltq-adsl-mei: Fix compilation with Linux 5.15Martin Blumenstingl2022-10-221-0/+1
| | | | | | | struct of_device_id is not implicitly included anymore. Include <linux/mod_devicetable.h> to fix compilation on Linux 5.15. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: ltq-vmmc: Fix compilation with Linux 5.15Martin Blumenstingl2022-10-221-0/+10
| | | | | | | MODULE_SUPPORTED_DEVICE is gone after Linux 5.15. Drop it's usage on newer kernels to fix compilation with Linux 5.15. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: ltq-vdsl-vr9-mei: Fix compilation with Linux 5.15Martin Blumenstingl2022-10-222-10/+71
| | | | | | | The result of copy_to_user() now has to be checked explicitly. Also MODULE_SUPPORTED_DEVICE is gone after Linux 5.10. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: ltq-tapi: Fix compilation with Linux 5.15Martin Blumenstingl2022-10-221-0/+10
| | | | | | | MODULE_SUPPORTED_DEVICE was removed after Linux 5.10. Drop it from the driver as well. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: ltq-deu: Fix compilation with Linux 5.15Martin Blumenstingl2022-10-223-0/+11
| | | | | | | | | | struct of_device_id is not implicitly included anymore. Include <linux/mod_devicetable.h> to fix compilation on Linux 5.15. Also upstream commit a24d22b225ce15 ("crypto: sha - split sha.h into sha1.h and sha2.h") from Linux 5.11 moves functionality from sha.h to sha1.h. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* ltq-ifxos: add compatibility with kernel 5.15Jan Hoffmann2022-10-221-0/+68
| | | | | | | set_fs is no longer supported since kernel 5.13 for mips. Signed-off-by: Jan Hoffmann <jan@3e8.eu> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: x86: Add glue_helper.ko only on kernel < 5.12Hauke Mehrtens2022-10-221-2/+2
| | | | | | | This module was removed with kernel 5.12. This fixes the build of the x86 target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: modules: iio: create and use AddDependsDaniel Golle2022-10-191-52/+55
| | | | | | Just like for other subsystems, create a reusable AddDepends call. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: test for kernel version greater 5.13 to fix mmc-spiNick Hainke2022-10-191-2/+3
| | | | | | | | | | The of_mmc_spi.o resource is provider agnostic in kernels greater 5.13 and does not depend anymore on CONFIG_OF [0]. [0] - https://github.com/torvalds/linux/commit/edd602146507532c1714d8428f654b87205f492e Suggested-by: John Thomson <git@johnthomson.fastmail.com.au> Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: disable kmod-fs-ntfs3 for Linux 5.10Rafał Miłecki2022-10-191-0/+1
| | | | | | | | This new NTFS driver was added in kernel 5.15. Avoid building empty package for kernel 5.10. Fixes: bd0db6017b192 ("kernel: 5.15: add new module") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* rtl8812au-ct: Fix compileHauke Mehrtens2022-10-181-0/+24
| | | | | | | | Replace the extern inline with a static inline. With extern inline the compiler will generate the function in all compile units including this file which breaks linking later. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: use board.json provided phy names in generated default configFelix Fietkau2022-10-141-51/+62
| | | | | | The phy will be automatically renamed on setup Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: change the default config for a renamed wiphyFelix Fietkau2022-10-141-21/+28
| | | | | | use option phy to reference the device instead of path/macaddr Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix detecting highest radio* config section indexFelix Fietkau2022-10-141-5/+10
| | | | | | Deal with gaps by iterating over existing sections instead of counting Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: rename phy according to board.json entries on bringupFelix Fietkau2022-10-141-3/+65
| | | | | | | This allows phy names specified in board.json to be used directly instead of the path option Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: change default ifname to <phy>-<type><index>Felix Fietkau2022-10-141-2/+17
| | | | | | | | This makes it clear, which phy a wlan device belongs to and also helps with telling them apart by including the mode in the ifname. Preparation for automatically renaming PHYs Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix typo in netifd scriptFelix Fietkau2022-10-131-1/+1
| | | | | | Reported-by: Chad Monroe <chad.monroe@smartrg.com> Fixes: 590eaaeed59a ("mac80211: fix issues in HE capabilities") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add patch that gives the driver more control over netdev offloadsFelix Fietkau2022-10-131-0/+513
| | | | | | This can be used to selectively disable checksum, SG or GSO offloads Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport security fixesFelix Fietkau2022-10-1316-3/+2059
| | | | | | | | | | | This mainly affects scanning and beacon parsing, especially with MBSSID enabled Fixes: CVE-2022-41674 Fixes: CVE-2022-42719 Fixes: CVE-2022-42720 Fixes: CVE-2022-42721 Fixes: CVE-2022-42722 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix issues in HE capabilitiesFelix Fietkau2022-10-131-10/+22
| | | | | | | | | | | Enable HE SU beamformee by default Fix spatial reuse configuration: - he_spr_sr_control is not a bool for enabling, it contains multiple bits which disable features that should be disabled by default - one of the features (PSR) can be enabled through he_spr_psr_enabled - add option to disable bss color / spatial reuse Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: sync rx STP fix with updated versionFelix Fietkau2022-10-071-12/+14
| | | | | | Add back skb length check and fix a minor issue in protocol detection Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix issues with receiving small STP packetsFelix Fietkau2022-10-072-0/+122
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix compile error when mesh is disabledKoen Vandeputte2022-10-041-1/+3
| | | | | | | | | | | | | | | | | | | This fixes following compile error seen when building mac80211 with mesh disabled: .../backports-5.15.58-1/net/mac80211/agg-rx.c: In function 'ieee80211_send_addba_resp': ...backports-5.15.58-1/net/mac80211/agg-rx.c:255:17: error: 'struct sta_info' has no member named 'mesh' 255 | if (!sta->mesh) | ^~ sta_info.h shows this item as being optional based on flags: struct mesh_sta *mesh; Guard the check to fix this. Fixes: f96744ba6b ("mac80211: mask nested A-MSDU support for mesh") Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-21 13:17:42 +0000