aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel
Commit message (Collapse)AuthorAgeFilesLines
* kernel: add new ltq-vdsl-vr11-mei driverMartin Schiller2023-01-168-0/+278
| | | | | | | | | | | | | | This uses version 1.11.1 of the drv_mei_cpe package from the Intel UGW 8.5.2.10 for the VRX518. Signed-off-by: Martin Schiller <ms.3headeddevs@gmail.com> [updated for kernel 5.10] Signed-off-by: Jan Hoffmann <jan@3e8.eu> [update to 1.11.1, switch to tag tarball, update patches] Signed-off-by: Andre Heider <a.heider@gmail.com> [update for kernel 5.15] Signed-off-by: Jan Hoffmann <jan@3e8.eu> Signed-off-by: Andre Heider <a.heider@gmail.com>
* ltq-ifxos: enable for ipq40xxAndre Heider2023-01-161-5/+3
| | | | | | This is required for the MEI CPE driver. Signed-off-by: Andre Heider <a.heider@gmail.com>
* kernel: add Intel/Lantiq VRX518 TC driverMartin Schiller2023-01-166-0/+3174
| | | | | | | | | | | | | This driver version is also included in Intel UGW 8.5.2.10. Signed-off-by: Martin Schiller <ms.3headeddevs@gmail.com> [updated for kernel 5.10] Signed-off-by: Jan Hoffmann <jan@3e8.eu> [update to 1.5.12.4, switch to tag tarball] Signed-off-by: Andre Heider <a.heider@gmail.com> [add working software data path] Signed-off-by: Jan Hoffmann <jan@3e8.eu> Signed-off-by: Andre Heider <a.heider@gmail.com>
* kernel: add Intel/Lantiq VRX518 EP driverMartin Schiller2023-01-1616-0/+4870
| | | | | | | | | | | | | This driver was picked from the Intel UGW 8.5.2. Signed-off-by: Martin Schiller <ms.3headeddevs@gmail.com> [updated for kernel 5.10] Signed-off-by: Jan Hoffmann <jan@3e8.eu> [update to 8.5.2] Signed-off-by: Andre Heider <a.heider@gmail.com> [fix masking interrupts and add locking] Signed-off-by: Jan Hoffmann <jan@3e8.eu> Signed-off-by: Andre Heider <a.heider@gmail.com>
* kernel: add Qualcomm NSS dataplane ethernet driverRobert Marko2023-01-1616-0/+917
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Qualcomm NSS-DP is as its name says Qualcomms ethernet driver for the NSS subsystem (Networking subsystem) built-into various Qualcomm SoCs. It has 2 modes of operation: * Without NSS FW and rest of code required for offloading This is the one that we will use as the amount of kernel patching required for NSS offloading and the fact that its not upstreamable at all makes it unusable for us. Driver in this mode is rather basic, it currently only offers NAPI GRO (Added by us as part of the fixup) and basically relies on the powerfull CPU to get good throughput. * With NSS FW and rest of code required for offloading In this mode, driver just registers the interfaces and hooks them into NSS-ECM to allow offloading. This mode is not viable for use in OpenWrt due to reasons already described above. This driver is required for ipq807x to have wired networking until a better one is available, so lets add the fixed-up version for 5.15 for now. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: add Qualcomm SSDK driverRobert Marko2023-01-1612-0/+657
| | | | | | | | | | | | | | | | Qualcomm SSDK is driver for Qualcomm Atheros switches and PHY-s. It is quite complicated and used by rest of the Qualcomm SDK stack for anything switch or PHY related. It is required for IPQ807x support as currently, there is no better driver for the built-in switch or UNIPHY. So, lets add the fixed-up version that supports kernel 5.15 for use on ipq807x target until a better driver is available. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Robert Marko <robimarko@gmail.com>
* mac80211: add ath11k AHB supportRobert Marko2023-01-164-2/+116
| | | | | | | | | | | | | | | | | This is the follow up to the PCI support commit now providing support for AHB variant as well, though currently only for ipq807x as that is only OpenWrt supported SoC ath11k supports as well. Currently, we are disabling coldboot calibration on ipq807x as it does not work, there is a remoteproc bug that makes it come late out of reset so disable coldboot until that is fixed. Also, as ath11k is quite memory hungry, we are introducing a config option to use the limits for 512MB of RAM, similar to what QCA does downstream but in way simpler and cleaner way so that 512MB save some RAM. 512MB profile is also set as the default for now. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq807x: add Qualcomm Atheros IPQ807x targetRobert Marko2023-01-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Qualcomm Atheros IPQ807x is a modern WiSoC featuring: * Quad Core ARMv8 Cortex A-53 * @ 2.2 GHz (IPQ8072A/4A/6A/8A) Codename Hawkeye * @ 1.4 GHz (IPQ8070A/1A) Codename Acorn * Dual Band simultaneaous IEEE 802.11ax * 5G: 8x8/80 or 4x4/160MHz (IPQ8074A/8A) * 5G: 4x4/80 or 2x2/160MHz (IPQ8071A/2A/6A) * 5G: 2x2/80MHz (IPQ8070A) * 2G: 4x4/40MHz (IPQ8072A/4A/6A/8A) * 2G: 2x2/40MHz (IPQ8070A/1A) * 1x PSGMII via QCA8072/5 (Max 5x 1GbE ports) * 2x SGMII/USXGMII (1/2.5/5/10 GbE) on Hawkeye * 2x SGMII/USXGMII (1/2.5/5 GbE) on Acorn * DDR3L/4 32/16 bit up to 2400MT/s * SDIO 3.0/SD card 3.0/eMMC 5.1 * Dual USB 3.0 * One PCIe Gen2.1 and one PCIe Gen3.0 port (Single lane) * Parallel NAND (ONFI)/LCD * 6x QUP BLSP SPI/I2C/UART * I2S, PCM, and TDMA * HW PWM * 1.8V configurable GPIO * Companion PMP8074 PMIC via SPMI (GPIOS, RTC etc) Note that only v2 SOC models aka the ones ending with A suffix are supported, v1 models do not comply to the final 802.11ax and have lower clocks, lack the Gen3 PCIe etc. SoC itself has two UBI32 cores for the NSS offloading system, however currently no offloading is supported. Signed-off-by: Robert Marko <robimarko@gmail.com>
* mac80211: ath11k: hack for multiple card supportRobert Marko2023-01-163-1/+302
| | | | | | | | | | | | This is a temporary workaround for supporting multiple cards or AHB+PCI. There is ongoing upstream work to properly support this based of advertised FW features, but that is still ongoing. This is only supported on QCN9074 cards due to FW limitation, so HW ID is checked in order to prevent breaking QCA6390 and other popular cards. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq40xx: add support for Linksys WHW03 V2Vincent Tremblay2023-01-151-0/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SOC: Qualcomm IPQ4019 WiFi 1: QCA4019 IEEE 802.11b/g/n WiFi 2: QCA4019 IEEE 802.11a/n/ac WiFi 3: QCA8888 IEEE 802.11a/n/ac Bluetooth: Qualcomm CSR8811 (A12U) Zigbee: Silicon Labs EM3581 NCP + Skyworks SE2432L Ethernet: Qualcomm Atheros QCA8072 (2-port) Flash 1: Mactronix MX30LF4G18AC-XKI RAM (NAND): SK hynix H5TC4G63CFR-PBA (512MB) LED Controller: NXP PCA9633 (I2C) Buttons: Single reset button (GPIO). - The three WiFis were fully tested and are configured with the same settings as in the vendor firmware. - The specific board files were submitted to the ATH10k mailing list but I'm still waiting for a reply. They can be removed once they are approved upstream. - Two ethernet ports are accessible on the device. By default one is configured as WAN and the other one is LAN. They are fully working. Bluetooth: ======== - Fully working with the following caveats: - RFKILL need to be enabled in the kernel. - An older version of bluez is needed as bccmd is needed to configure the chip. Zigbee: ====== - The spidev device is available in the /dev directory. - GPIOs are configured the same way as in the vendor firmware. - Tests are on-going. I am working on getting access to the Silicon Labs stack to validate that it is fully working. Installation: ========= The squash-factory image can be installed via the Linksys Web UI: 1. Open "http://192.168.1.1/ca" (Change the IP with the IP of your device). 2. Login with your admin password. 3. To enter into the support mode, click on the "CA" link and the bottom of the page. 4. Open the "Connectivity" menu and upload the squash-factory image with the "Choose file" button. 5. Click start. Ignore all the prompts and warnings by click "yes" in all the popups. The device uses a dual partition mechanism. The device automatically revert to the previous partition after 3 failed boot attempts. If you want to force the previous firmware to load, you can turn off and then turn on the device for 2 seconds, 3 times in a row. It can also be done via TFTP: 1. Setup a local TFTP server and configure its IP to 192.168.1.100. 2. Rename your image to "nodes_v2.img" and put it to the TFTP root of your server. 3. Connect to the device through the serial console. 4. Power on device and press enter when prompted to drop into U-Boot. 5. Flash the partition of your choice by typing "run flashimg" or "run flashimg2". 6. Once flashed, enter "reset" to reboot the device. Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Vincent Tremblay <vincent@vtremblay.dev>
* mac80211: ath11k: fix monitor bringupRobert Marko2023-01-122-0/+240
| | | | | | | | | | Currently, ath11k will crash the crash if we try to bringup the monitor mode interface. Luckily, it has already been fixed upstream, so backport the patches fixing it. Fixes: 93ae4353cdf6 ("mac80211: add ath11k PCI support") Signed-off-by: Robert Marko <robimarko@gmail.com>
* ksmbd: Fix ZDI-CAN-18259Hauke Mehrtens2023-01-113-1/+100
| | | | | | | | | | | This fixes a security problem in ksmbd. It currently has the ZDI-CAN-18259 ID assigned, but no CVE yet. Backported from: https://github.com/cifsd-team/ksmbd/commit/8824b7af409f51f1316e92e9887c2fd48c0b26d6 https://github.com/cifsd-team/ksmbd/commit/cc4f3b5a6ab4693aba94a45cc073188df4d67175 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* rtl8812au-ct: Ignore address errorsHauke Mehrtens2023-01-091-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GCC 12.2.0 shows these error messages: ```` rtl8812au-ct-2021-11-07-39df5596/core/rtw_sta_mgt.c: In function 'rtw_mfree_stainfo': rtl8812au-ct-2021-11-07-39df5596/core/rtw_sta_mgt.c:210:24: error: the comparison will always evaluate as 'true' for the address of 'lock' will never be NULL [-Werror=address] 210 | if(&psta->lock != NULL) | ^~ In file included from rtl8812au-ct-2021-11-07-39df5596/include/drv_types.h:109, from rtl8812au-ct-2021-11-07-39df5596/core/rtw_sta_mgt.c:22: rtl8812au-ct-2021-11-07-39df5596/include/sta_info.h:95:17: note: 'lock' declared here 95 | _lock lock; | ^~~~ ```` ```` CC [M] rtl8812au-ct-2021-11-07-39df5596/os_dep/linux/ioctl_cfg80211.o rtl8812au-ct-2021-11-07-39df5596/os_dep/linux/ioctl_cfg80211.c: In function 'cfg80211_rtw_scan': rtl8812au-ct-2021-11-07-39df5596/os_dep/linux/ioctl_cfg80211.c:2176:32: warning: the comparison will always evaluate as 'true' for the address of 'ssid' will never be NULL [-Waddress] 2176 | if(ssids->ssid != NULL | ^~ In file included from rtl8812au-ct-2021-11-07-39df5596/include/osdep_service_linux.h:88, from rtl8812au-ct-2021-11-07-39df5596/include/osdep_service.h:41, from rtl8812au-ct-2021-11-07-39df5596/include/drv_types.h:32, from rtl8812au-ct-2021-11-07-39df5596/os_dep/linux/ioctl_cfg80211.c:22: /home/hauke/openwrt/openwrt/staging_dir/target-mips_24kc_musl/usr/include/mac80211/net/cfg80211.h:2364:12: note: 'ssid' declared here 2364 | u8 ssid[IEEE80211_MAX_SSID_LEN]; | ^~~~ ```` ```` CC [M] rtl8812au-ct-2021-11-07-39df5596/hal/OUTSRC/phydm_debug.o rtl8812au-ct-2021-11-07-39df5596/hal/OUTSRC/phydm_debug.c: In function 'phydm_cmd_parser': rtl8812au-ct-2021-11-07-39df5596/hal/OUTSRC/phydm_debug.c:873:28: warning: the comparison will always evaluate as 'true' for the pointer operand in 'input + ((sizetype)i + 1) * 16' must not be NULL [-Waddress] 873 | if(input[i+1]) { | ^~~~~ rtl8812au-ct-2021-11-07-39df5596/hal/OUTSRC/phydm_debug.c:894:28: warning: the comparison will always evaluate as 'true' for the pointer operand in 'input + ((sizetype)i + 1) * 16' must not be NULL [-Waddress] 894 | if(input[i+1]) { | ^~~~~ ```` This one was only seen on the rockchip/armv8 target: ```` CC [M] rtl8812au-ct-2021-11-07-39df5596/core/rtw_br_ext.o In function '__nat25_add_pppoe_tag', inlined from 'nat25_db_handle' at rtl8812au-ct-2021-11-07-39df5596/core/rtw_br_ext.c:909:10: rtl8812au-ct-2021-11-07-39df5596/core/rtw_br_ext.c:118:9: error: 'memcpy' reading between 2052 and 9220 bytes from a region of size 40 [-Werror=stringop-overread] 118 | memcpy((unsigned char *)ph->tag, tag, data_len); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ rtl8812au-ct-2021-11-07-39df5596/core/rtw_br_ext.c: In function 'nat25_db_handle': rtl8812au-ct-2021-11-07-39df5596/core/rtw_br_ext.c:878:63: note: source object 'tag_buf' of size 40 878 | unsigned char tag_buf[40]; | ^~~~~~~ ```` Most of them are looking like real errors to me, but some fixes need a deeper understanding of the driver and probably bigger changes to the driver. Ignore these error messages for now. It would be nice if someone would fix them. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mt76: add stand-alone MT7622 firmware packageShiji Yang2023-01-071-4/+16
| | | | | | | | | Add a separate firmware package to avoid installing the MT7615 firmware on all MT7622 target devices by default. Now we only add MT7615 firmware packages for devices that use MT7615E. This commit also removes the explicit dependency on kmod-mt7615e to refine the package dependency. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* mt76: add stand-alone MT7915 firmware packageShiji Yang2023-01-071-1/+8
| | | | | | | | | The mt7915e driver supports MT7915, MT7916 and MT7986 chips. And Only MT7915 series chips need the MT7915 firmware. To save storage, extract them from the common code package and create a new package to provide the firmware. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* mt76: remove unnecessary dependency from mt7915eShiji Yang2023-01-071-1/+1
| | | | | | | | | The kmod-mt7615-common package does not contain any code that related to mt7915e Wi-Fi6 driver, so remove it. Tested on ramips/mt7621: SIM SIMAX1800T Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* mac80211: fix receiving multicast packets on multiple sta interfacesFelix Fietkau2022-12-301-26/+30
| | | | | | Also fix MLO sta sdata link initialization Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: Do not build brcmsmac on bcm47xx_legacyHauke Mehrtens2022-12-241-1/+1
| | | | | | | | | brcmsmac needs bcma. bcma is build into the kernel for the other bcm47xx subtargets, but not for the legacy target because it only uses ssb. We could build bcma as a module for bcm47xx_legacy, but none of these old devices uses a wifi card supported by brcsmac. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mt76: update to the latest versionFelix Fietkau2022-12-221-3/+3
| | | | | | | a03ef0aab93e wifi: mt76: mt7921: fix deadlock in mt7921_abort_roc 5b509e80384a wifi: mt76: dma: fix a regression in adding rx buffers Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add ath11k PCI supportRobert Marko2022-12-1920-4/+1718
| | | | | | | | | | | | | | | | | | | | | | ath11k is the upstream driver for Qualcomm 802.11ax radios, both for the internal AHB and PCI based cards. This commit does however only provide PCI support while AHB will follow but its SoC specific so it will require an OpenWrt target first. It differs a bit from ath10k as it requires stuff like QRTR, MHI and QMI helpers. PCI variant requires qrtr-mhi and mhi-bus which backports do provide, however we are dropping those in a patch as they will conflict with support for the AHB variant as that one requires qrtr-smd which in turn requires RPMSG and GLINK and its not feasable to provide those in backports as they are really SoC specific. QRTR and MHI in kernel 5.10 are not usable and backporting the changes is not easy as they have changed drastically from 5.10 to 5.15 ath11k will only be available on targets that use kernel 5.15. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: package QRTR supportRobert Marko2022-12-191-0/+64
| | | | | | | | | | | | | | | | | QRTR is Qualcomm IPC router protocol and ath11k requires it for both AHB and PCI support, so package it as a kernel module so it can be added as a dependency to the ath11k module. Only kernel 5.15 is currently supported due to various things missing in 5.10 whose backporting is out of scope for this patch. SMD, TUN and MHI variants are packaged. SMD variant depends on the ipq807x target as it has dependency on the RPMSG drivers which are Qualcomm and SoC specific anyway. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: Make use of KERNEL_MAKEHauke Mehrtens2022-12-1710-31/+13
| | | | | | | | | | | | Make use of KERNEL_MAKE in kernel packages were easily possible. This moves some more code to common places and reduces the number of lines. It is defined like this: KERNEL_MAKE = $(MAKE) $(KERNEL_MAKEOPTS) KERNEL_MAKEOPTS = -C $(LINUX_DIR) $(KERNEL_MAKE_FLAGS) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add driver package for WS2812B LEDsChuanhong Guo2022-12-163-0/+268
| | | | | | | Two WS2812B (NeoPixel) clones are used in Xiaomi Redmi AX6000 as indicator lights. Add a driver for controlling it using SPI MOSI. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mac80211: fix a regression in processing management frames for AP VLAN ↵Felix Fietkau2022-12-161-21/+22
| | | | | | | | interfaces Fixes re-assoc of WDS stations Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: work around a race condition on detecting a phy while bringing it upFelix Fietkau2022-12-161-0/+4
| | | | | | | | When reloading modules and running wifi, a phy can sometimes be renamed while in the middle of a hotplug call that tries to detect new phys This can lead to bogus wifi-device sections being created Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix uninitialized variable in rx->link/link_sta initialization fixFelix Fietkau2022-12-161-23/+15
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix connecting multiple wds stations to an APFelix Fietkau2022-12-142-1/+26
| | | | | | A faulty check prevented the AP_VLAN interfaces from being brought up Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add a fix for a crash in __ieee80211_rx_h_amsduFelix Fietkau2022-12-131-0/+413
| | | | | | Fix initialization of rx->link_sta Signed-off-by: Felix Fietkau <nbd@nbd.name>
* treewide: remove DRIVER_11N_SUPPORTAndre Heider2022-12-1311-21/+21
| | | | | | | | | | | | hostapd's compile time option CONFIG_IEEE80211N was removed almost 3 years ago, 80.211n/HT is always included since then. Noticed because `hostapd -v11n` confusingly returned an error. See hostapd's commit: f3bcd69603 "Remove CONFIG_IEEE80211N build option" Signed-off-by: Andre Heider <a.heider@gmail.com>
* ath9k: add missing dependency on random coreFelix Fietkau2022-12-131-1/+1
| | | | | Reported-by: Hartmut Birr <e9hack@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: modules/lib-lz4: add lz4hc_compressTony Butler2022-12-112-1/+7
| | | | | | | | | enable option `CONFIG_CRYPTO_LZ4HC` to match default kernel config this only adds the `lz4hc_compress` module, and has no effect on the `lz4_decompress` module which already supports any flavor Signed-off-by: Tony Butler <spudz76@gmail.com>
* rtl8812au-ct: fix build with newer backports cfg80211 apiFelix Fietkau2022-12-111-0/+56
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2022-12-102-1611/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ec46d7486ab9 sync with upstream 2575de3aea33 wifi: mt76: mt7921: introduce chanctx support 473cebb3c3e1 wifi: mt76: fix bandwidth 80MHz link fail in 6GHz band de3e77227f62 wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices f0c191a9f6cd wifi: mt76: mt7996: add missing argument in mt7996_queue_rx_skb() d3838a52df62 wifi: mt76: mt7996: enable use_cts_prot support 98492dff3bec wifi: mt76: mt7996: enable ack signal support 2a41e7a82f86 wifi: mt76: mt7996: add support to configure spatial reuse parameter set 194cb3392829 mt76: mt7915: add missing of_node_put() f91d6f3b73ac wifi: mt76: mt7921s: fix slab-out-of-bounds access in sdio host 1ce4970d799f wifi: mt76: mt7915: fix mt7915_rate_txpower_get() resource leaks 379f3fc0fc43 wifi: mt76: mt7996: fix insecure data handling of mt7996_mcu_ie_countdown() 233c272f0f86 wifi: mt76: mt7996: fix insecure data handling of mt7996_mcu_rx_radar_detected() 5616c4cc1d5d wifi: mt76: mt7996: fix integer handling issue of mt7996_rf_regval_set() f9598e6d4c2c wifi: mt76: mt7915: split mcu chan_mib array up b252d94bd763 wifi: mt76: mt7915: check return value before accessing free_block_num f1cc3696d725 wifi: mt76: mt7996: check return value before accessing free_block_num b94ba58fa698 wifi: mt76: mt7915: check the correctness of event data 35843a1670c0 wifi: mt76: mt7915: drop always true condition of __mt7915_reg_addr() 01a256c1dc41 wifi: mt76: mt7996: drop always true condition of __mt7996_reg_addr() 5185bbab8953 wifi: mt76: mt7996: fix endianness warning in mt7996_mcu_sta_he_tlv eeb6949c4d06 wifi: mt76: mt76x0: fix oob access in mt76x0_phy_get_target_power 063823aba978 wifi: mt76: mt7921: add support to update fw capability with MTFG table a44109267e4e wifi: mt76: mt7996: fix unintended sign extension of mt7996_hw_queue_read() be5dbb781068 wifi: mt76: mt7915: fix unintended sign extension of mt7915_hw_queue_read() adf9042b6f63 wifi: mt76: fix coverity uninit_use_in_call in mt76_connac2_reverse_frag0_hdr_trans() 551201379efe wifi: mt76: move leds field in leds struct 14fbb6d6e85e wifi: mt76: move leds struct in mt76_phy 81edc468fc62 wifi: mt76: mt7915: enable per-phy led support bbad827e447f wifi: mt76: mt7615: enable per-phy led support 8e7e7e52fc09 wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails 95c66d651133 wifi: mt76: handle possible mt76_rx_token_consume failures 52d04463a66e wifi: mt76: dma: rely on queue page_frag_cache for wed rx queues 7fae1de12ae7 wifi: mt76: mt7921: resource leaks at mt7921_check_offload_capability() Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: update to linux 6.1-rc8Felix Fietkau2022-12-10125-9643/+4153
| | | | | | This should help stay in sync with upstream development Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to version 2022-12-01Felix Fietkau2022-12-101-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 3deafbad7061 wifi: mt76: mt7915: fix uninitialized irq_mask 6ca31dc64da4 wifi: mt76: mt7921: introduce remain_on_channel support 7962005b0734 wifi: mt76: connac: rework macros for unified command 3b2882ca704e wifi: mt76: connac: update struct sta_rec_phy c4d46cb1dd45 wifi: mt76: connac: rework fields for larger bandwidth support in sta_rec_bf 532c322fd72f wifi: mt76: connac: add more unified command IDs 4c43e060726b wifi: mt76: connac: introduce unified event table 4c423058920d wifi: mt76: connac: add more bss info command tags 143d7ab8ef92 wifi: mt76: connac: add more starec command tags 733ef9887b2c wifi: mt76: connac: introduce helper for mt7996 chipset 8e309b5560e1 wifi: mt76: mt7921: fix wrong power after multiple SAR set d791ed1f5877 wifi: mt76: mt7915: add missing MODULE_PARM_DESC 3b8eed9c3866 wifi: mt76: mt7915: add support to configure spatial reuse parameter set 417cca39bab2 wifi: mt76: introduce rxwi and rx token utility routines 629f8631f54f wifi: mt76: add WED RX support to mt76_dma_{add,get}_buf 13c2dc8993b6 wifi: mt76: add WED RX support to mt76_dma_rx_fill 86e94f4162b7 wifi: mt76: add WED RX support to dma queue alloc 1361519851f3 wifi: mt76: add info parameter to rx_skb signature a2e5e0667553 wifi: mt76: connac: introduce mt76_connac_mcu_sta_wed_update utility routine f38faf294310 wifi: mt76: mt7915: enable WED RX support a887a5feb3d1 wifi: mt76: mt7915: enable WED RX stats 4c23061ebcfc wifi: mt76: mt7915: add basedband Txpower info into debugfs a9c88ded5cac wifi: mt76: mt7915: enable .sta_set_txpwr support 2c172bb6cd9f wifi: mt76: mt7915: fix band_idx usage 1b88dd07f153 linux-firmware: update firmware for MT7915 6196f6080506 linux-firmware: update firmware for MT7916 daae6ca5d81f linux-firmware: update firmware for MT7986 e7a9f7a0440c wifi: mt76: mt7915: fix unused-but-set warning 340f3be65397 wifi: mt76: fix coverity overrun-call in mt76_get_txpower() aa7132da0326 wifi: mt76: mt7915: fix endianness of mt7915_mcu_set_obss_spr_pd() a36017d09324 wifi: mt76: mt7921: Add missing __packed annotation of struct mt7921_clc 66dc48bea883 wifi: mt76: do not send firmware FW_FEATURE_NON_DL region fa79eeeadc2d mt76: mt7915: Fix PCI device refcount leak in mt7915_pci_init_hif2() ff94604b2edd wifi: mt76: mt7915: introduce mt7915_get_power_bound() 5082a58f8082 wifi: mt76: mt7915: enable per bandwidth power limit support a7b915302147 wifi: mt76: mt7915: fix scene detection flow of spatial reuse 525592c28d6b wifi: mt76: mt7915: rely on band_idx of mt76_phy cdd7229e769b wifi: mt76: mt7915: mmio: fix naming convention Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: use wpa_supplicant for unencrypted mesh connectionsFelix Fietkau2022-12-101-1/+1
| | | | | | It's more reliable than using iw Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: Update to version 5.15.81Hauke Mehrtens2022-12-0328-359/+56
| | | | | | The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: subsys: complete patch files for use with git amNick Hainke2022-11-275-4/+47
| | | | | | | Adding proper fields to patch files allowing for `git am` to properly function. Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel/module/iio: add TI am335x ADC driverAlexander Couzens2022-11-241-0/+14
| | | | | | | Add the iio driver for the embedded ADC in the TI Sitara am335x SoCs. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* lantiq: ltq-tapi: add customer pulse digit timeJonas Albrecht2022-11-182-1/+53
| | | | | | | | | | | | | | | | | | | | | With this patch you can change the pulse digit time by loading the Lantiq FXS driver kernel module called ltq-tapi. This is relevant for old rotaryphones that uses pulsedialing. The default values are: 30-80ms for the low pulse 30-80ms for the high pulse 300ms for minimum Interdigit time this is OK but on some Phones it can be usefull to customize the values If you want to change the values to high and low pulse to 40-90ms and minimum interdigit time to 400ms than change /etc/modules.d/20-ltq-tapi to (without linebrakes): drv_tapi min_digit_low=40 min_digit_high=90 max_digit_low=40 \ max_digit_high=90 min_interdigit=400 Signed-off-by: Jonas Albrecht <plonkbong100@protonmail.com>
* kernel: modules: package Marvell gigE PHY driverDaniel Golle2022-11-151-0/+34
| | | | | | | | | | | | | | | | | | | Some copper SFP modules come with Marvell's 88E1xxx PHY and need this module to function. Package it, so users can easily install this PHY driver and use e.g. FINISAR CORP. FCLF-8521-3-HC SFP. Without marvell PHY driver: sfp sfp2: module FINISAR CORP. FCLF-8521-3-HC rev A sn XXXXXXX dc XXXXXX mt7530 mdio-bus:1f sfp2: validation with support 0000000,00000000,00000000 failed: -22 sfp sfp2: sfp_add_phy failed: -22 With marvell PHY driver: sfp sfp2: module FINISAR CORP. FCLF-8521-3-HC rev A sn XXXXXXX dc XXXXXX mt7530 mdio-bus:1f sfp2: switched to inband/sgmii link mode mt7530 mdio-bus:1f sfp2: PHY [i2c:sfp2:16] driver [Marvell 88E1111] (irq=POLL) mt7530 mdio-bus:1f sfp2: Link is Up - 1Gbps/Full - flow control rx/tx Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: add kmod-hwmon-sht3x supportUwe Kleine-König2022-11-131-0/+15
| | | | | | | The driver supports the temperature and humidity sensors chips SHT3x and STS3x by Sensirion. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
* mt76: move the mt7921 firmware to its own packageAndre Heider2022-11-121-3/+9
| | | | | | | | | It's not just required for the PCI version, but for USB and presumably SDIO as well. Tested with 0e8d:7961 Comfast CF-953AX (MT7921AU). Signed-off-by: Andre Heider <a.heider@gmail.com>
* mt76: update to the latest versionFelix Fietkau2022-11-121-3/+3
| | | | | | 4bf2607362fc wifi: mt76: fix dbdc number of spatial streams limit Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: support for Realtek USB bluetooth devicesQuintin Hill2022-11-121-2/+3
| | | | | | | | | | | USB adaptors with the RTL8761B chipset are cheap and readily available but so far support is missing in Openwrt. Enable the relevant kernel options and add a module to the kmod-bluetooth package. Increases size of kmod-bluetooth ipk from 279140 bytes to 285320 bytes on my ath79 build. Tested on a WNDR3700v4 with rtl8761bu firmware. Signed-off-by: Quintin Hill <stuff@quintin.me.uk>
* mt76: update to the latest versionFelix Fietkau2022-11-112-16/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 8cc34bdc9ef0 wifi: mt76: mt7921: set MT_DRV_AMSDU_OFFLOAD for USB/SDIO 2182de50a37c wifi: mt76: fix receiving LLC packets on mt7615/mt7915 269df4b01f27 wifi: mt76: fix rx checksum offload on mt7615/mt7915/mt7921 fa4ace8e3b58 ieee80211: add EHT 1K aggregation definitions 176df35e7e80 wifi: mt76: mt7915: improve accuracy of time_busy calculation 94b335fa88e1 wifi: mt76: mt7915: add ack signal support 3365c129f73c wifi: mt76: mt7915: enable use_cts_prot support ad9bd2ba361e wifi: mt76: mt7615: enable use_cts_prot support 68bdcccb0aa7 wifi: mt76: mt7915: fix reporting of TX AGGR histogram 242fece4323f wifi: mt76: mt7921: fix reporting of TX AGGR histogram 75003c69a9bd wifi: mt76: mt7615: rely on mt7615_phy in mt7615_mac_reset_counters 65c70a32f1cf wifi: mt76: move aggr_stats array in mt76_phy b1ddf8bec058 wifi: mt76: mt7915: rework mt7915_dma_reset() 1ad31c3f76f4 wifi: mt76: mt7915: enable full system reset support 6b0668de7a53 wifi: mt76: mt7915: add full system reset into debugfs a5e48378d2a6 wifi: mt76: mt7915: enable coredump support 1e9060420c92 wifi: mt76: mt7915: fix incorrect tx path number configuration 0263711ba362 wifi: mt76: mt7915: fix antenna selection with bad eeprom. 869815e5ef86 wifi: mt76: mt7915: Fix chainmask calculation on mt7915 DBDC fc410557b7e1 wifi: mt76: mt7915: Fix VHT beamforming capabilities with DBDC daa30a31cf70 wifi: mt76: mt7915: don't claim 160MHz support with mt7915 DBDC 80bcecdbc2ff wifi: mt76: connac: update nss calculation in txs 465219c1f56c wifi: mt76: do not run mt76u_status_worker if the device is not running c7db15903e5c wifi: mt76: connac: add mt76_connac_mcu_uni_set_chctx 7a2b1a13b1b0 wifi: mt76: mt7921: add chanctx parameter to mt76_connac_mcu_uni_add_bss signature dece6921e606 wifi: mt76: mt7921: add unified ROC cmd/event support d4da182389b6 wifi: mt76: mt7921: drop ieee80211_[start, stop]_queues in driver 0c3ef988d8dc wifi: mt76: connac: accept hw scan request at a time c477225fd10e mt7615: update cr4 firmware to 20190415154149 413a4bf39513 mt76: mt7915: fix unused-but-set variable f5034abea899 mt76: mt7915: fix format string a9ac73ed8275 wifi: mt76: mt7615: increase eeprom size for mt7663 4a27f23fc4f2 linux-firmware: update firmware for MT7921 WiFi device Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix mesh airtime link metric estimationFelix Fietkau2022-11-101-0/+36
| | | | | | fix reading the per-packet rate on devices with firmware rate control Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: remove old legacy legacy driversFelix Fietkau2022-11-0910-834/+5
| | | | | | | | | | | Get rid of drivers that are either limited to 802.11b/g or don't even support cfg80211/mac80211. Most of these are either limited to boards that we don't even support anymore because of firmware size, or were only used for custom hacks by a really small number of users in the past. Let's get rid of those to reduce the maintenance effort and the number of useless packages Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: add firmware package for mt7916Andrew Powers-Holmes2022-11-091-0/+16
| | | | | | | | | | Add kernel package 'mt7916-firmware' with firmware files for MT7916E devices. These share the same driver as the MT7915 chipset, but use their own firmware. Tested using a pair of AsiaRF AW7916-NPD cards. Signed-off-by: Andrew Powers-Holmes <aholmes@omnom.net>
* mac80211: subsys: add tags to upstreamed patchesNick Hainke2022-11-0932-0/+0
| | | | | | Some patches were already upstreamed. Signed-off-by: Nick Hainke <vincent@systemli.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-20 04:09:27 +0000