aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel
Commit message (Collapse)AuthorAgeFilesLines
* kernel: remove mvsw61xx swconfig driverDENG Qingfang2020-11-161-14/+0
| | | | | | | All targets that used mvsw61xx have switched to upstream mv88e6xxx DSA driver, so it can be removed. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* kernel: remove kmod-capiFelix Fietkau2020-11-131-20/+0
| | | | | | We don't package any driver that uses this module Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add module support Solarflare network adapterTan Zien2020-11-121-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to Solarflare user guide it is recommended to install lm-sensors and use the following command to obtain adapter health info $ sensors | grep sfc sfc pci 0400 sfc pci 0401 $ sensors sfc pci 0400 sfc pci 0400 Adapter: PCI adapter 1.2V supply: N/A 3.3V supply: +3.22 V (min = +3.00 V, max = +3.60 V) 12.0V supply: +12.14 V (min = +11.04 V, max = +12.96 V) 0.9V supply (ext. ADC): +1.03 V (min = +0.50 V, max = +1.10 V) (crit max = +1.15 V) 0.9V phase A supply: N/A PHY overcurrent: N/A ERROR: Can't get value of subfeature temp1_alarm: Can't read PHY temp.: N/A AOE FPGA temp.: +68.0°C (low = +0.0°C, high = +95.0°C) (crit = +105.0°C) Ambient temp.: +56.0°C (low = +0.0°C, high = +75.0°C) (crit = +85.0°C) Controller die (TDIODE) temp.: +77.0°C (low = +0.0°C, high = +95.0°C) (crit = +105.0°C) Board front temp.: +59.0°C (low = +0.0°C, high = +75.0°C) (crit = +85.0°C) Board back temp.: +62.0°C (low = +0.0°C, high = +75.0°C) (crit = +85.0°C) 1.2V supply current: N/A 0.9V phase A supply current: N/A 3.3V supply current: N/A 12V supply current: N/A Signed-off-by: Tan Zien <nabsdh9@gmail.com>
* netfilter: Add queue support for nftablesBrett Mastbergen2020-11-121-0/+12
| | | | | | | | | This change adds the configuration option to build and include the nft_queue kernel module, which allows traffic to be queued up to userspace from an nftables rule Tested-by: Sébastien Delafond sdelafond@gmail.com Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
* mac80211: add minstrel fixes that fix mt76 issues in legacy modeFelix Fietkau2020-11-122-0/+122
| | | | | | | | Remove deferred sampling code which does not work well with rate tables + probing. Fix tx status handling if the first invalid rate idx is not set to -1 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport the new tasklet APIFelix Fietkau2020-11-121-0/+35
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: ath9k: enable OEM cards support on x86Rafał Dzięgiel2020-11-041-0/+1
| | | | | | | | | | | A lot of devices running OpenWrt x86 arch (32 or 64 bit) are either "home-made routers" or devices that use PC class OEM components. This commit enables OEM cards support on those devices by default. Signed-off-by: Rafał Dzięgiel <rafostar.github@gmail.com> [reformat commit message] Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: remove obsolete kernel version switches for 4.19Adrian Schmutzler2020-10-3012-77/+19
| | | | | | | This removes switches dependent on kernel version 4.19 as well as several packages/modules selected only for that version. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* Revert "kmod-nft-reject: Fix for "nft_reject_ipv4.ko missing" warning"Daniel Golle2020-10-301-3/+0
| | | | | | | | | This reverts commit 7f94e2afcf090f751c9f7f7ea46e8ef8d93ee84b. Package kmod-nft-core is missing dependencies for the following libraries: nft_reject.ko Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kmod-nft-reject: Fix for "nft_reject_ipv4.ko missing" warningPhilip Prindeville2020-10-301-0/+3
| | | | | | | | | | Seeing the following: ERROR: module '/home/philipp/lede/build_dir/target-x86_64_musl/linux-x86_64/linux-5.4.33/net/ipv4/netfilter/nft_reject_ipv4.ko' is missing. modules/netfilter.mk:1068: recipe for target '/home/philipp/lede/bin/targets/x86/64/packages/kmod-nft-core_5.4.33-1_x86_64.ipk' failed make[3]: *** [/home/philipp/lede/bin/targets/x86/64/packages/kmod-nft-core_5.4.33-1_x86_64.ipk] Error 1 Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* mac80211: Fix wpa_supplicant config removal ubus callSven Eckelmann2020-10-282-2/+2
| | | | | | | | | | | | | | | If mac80211_setup_supplicant() is called with enabled=0 then it should just destroy the interface and remove the configuration from wpa_supplicant. But the ubus method call always returned Command failed: Method not found because the actual name of the method is "config_remove". Fixes: b5516603dd90 ("mac80211: more wifi reconf related fixes") Signed-off-by: Sven Eckelmann <sven@narfation.org> [bump PKG_RELEASE] Signed-off-by: David Bauer <mail@david-bauer.net>
* mac80211: pass phy name to hostapd_set_bss_optionsDavid Bauer2020-10-281-1/+1
| | | | | | | | | | | | hostapd_set_bss_options expects the PHY as second and the VIF as third argument. However, only the VIF was passed as second argument without a third argument at all. This was never a problem, as both PHY and VIF were never accessed. However, with FTM support the PHY is needed to determine the HW support when configuring the BSS. Signed-off-by: David Bauer <mail@david-bauer.net>
* mac80211: rt2x00: save survey for every channel visitedMarkov Mikhail2020-10-211-0/+183
| | | | | | | | | | | | | | | rt2800 olny gives you survey for current channel. Survey-based ACS algorithms are failing to perform their job when working with rt2800. Make rt2800 save survey for every channel visited and be able to give away that information. There is a bug registred https://dev.archive.openwrt.org/ticket/19081 and this patch solves the issue. Signed-off-by: Markov Mikhail <markov.mikhail@itmh.ru>
* mac80211: fix memory leak on filtered powersave framesFelix Fietkau2020-10-171-0/+55
| | | | | | | | | | After the status rework, ieee80211_tx_status_ext is leaking un-acknowledged packets for stations in powersave mode. To fix this, move the code handling those packets from __ieee80211_tx_status into ieee80211_tx_status_ext Reported-by: Tobias Waldvogel <tobias.waldvogel@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add a kmod package for the SoC S/PDIF codecAndre Heider2020-10-111-0/+14
| | | | | | | | Size of the modules for a Cortex A7 build: 43920 linux-5.4.66/sound/soc/codecs/snd-soc-spdif-rx.ko 44044 linux-5.4.66/sound/soc/codecs/snd-soc-spdif-tx.ko Signed-off-by: Andre Heider <a.heider@gmail.com>
* kernel: fix name of CONFIG_SND_SOC_GENERIC_DMAENGINE_PCMAndre Heider2020-10-111-2/+2
| | | | | | | | | CONFIG_SND_SOC_DMAENGINE_PCM was removed and replaced with CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM seven years ago, see: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=28c4468b00a1e55e08cc20117de968f7c6275441 https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b7ae6f31d8243ec684af16bc5c763eccdfabaec0 Signed-off-by: Andre Heider <a.heider@gmail.com>
* kernel: Move CONFIG_*_FS_XATTR to generic kernel configHauke Mehrtens2020-10-111-3/+1
| | | | | | | This option is now activated in the generic kernel configuration, no need to do it for a specific package. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: move CONFIG_F2FS_CHECK_FS to generic kernel configHauke Mehrtens2020-10-111-4/+1
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Move CONFIG_F2FS_FS_SECURITY to generic kernel configHauke Mehrtens2020-10-111-1/+0
| | | | | | | Move the CONFIG_F2FS_FS_SECURITY kernel configuration option to the generic kernel configuration. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Remove 2FS_FS_XATTR and F2FS_STAT_FS symbols from target configsHauke Mehrtens2020-10-111-2/+0
| | | | | | | This config option was moved to the generic kernel configuration. Fixes: ab1bd576562b ("kernel: move F2FS_FS_XATTR and F2FS_STAT_FS symbols to generic") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* rt2x00: mt7620: differentiate based on SoC's CHIP_VERDaniel Golle2020-10-092-0/+547
| | | | | | | | | | | | | | | | | | | | | | | The vendor driver does things differently based on what it finds in the SoC's CHIP_VER register, which should tell whether this is MT7620N or MT7620A (PKG) and probably also the revision (VER) and most likely also something about the silicon implementer (ECO). Introduce codepaths just like the ones in the vendor driver to handle the different chips properly. Some of those paths are most likely dead code and left-overs from FPGA versions or early prototypes of the chip. It'd thus be great if people can post their kernel logs, at least the line telling the chip version and eco, so we know what's actually out there in the wild -- all I could find is [ 0.000000] SoC Type: Ralink MT7620A ver:2 eco:6 and [ 0.000000] SoC Type: Ralink MT7620N ver:2 eco:6 which would make things easier, as then we really just need to know whether it's MT7620N or MT7620A and not care about FPGA or prototypes with ver <= 1 and eco <= 2. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* layerscape: add layerscape's SATA driver packagePawel Dembicki2020-10-021-1/+1
| | | | | | | | | | | This patch intruduce SATA support for layerscape devices. Target specific package with ahci_qoriq driver was added to local modules.mk. Kmod package was added to default packages for devices with SATA interface. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com>
* mac80211: add support for specifying a per-device scan listFelix Fietkau2020-09-291-0/+2
| | | | | | | This is useful to bring up multiple client mode interfaces on a single channel much faster without having to scan through a lot of channels Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport sched_set_fifo_lowFelix Fietkau2020-09-291-0/+32
| | | | | | This is needed for newer mt76 updates Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: another fix for the sta connection monitorFelix Fietkau2020-09-291-5/+37
| | | | | | Make the code more closely match the original behavior Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: define PWM_SUPPORT arch feature flagChristian Lamparter2020-09-251-0/+16
| | | | | | | | | | As the PWM has its own sub-system in the Linux kernel, I think it should be handled in the same way as GPIO, RTC, PCI... This patch introduces a specific feature flag "pwm" and the "leds-pwm" kernel module as the first customer. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mt76: update to the latest versionFelix Fietkau2020-09-231-3/+3
| | | | | | | | | 73301065ac32 mt76: mt7615: reduce maximum VHT MPDU length to 7991 8c47ed12c2be mt76: mt7915: add offchannel condition in switch channel command 1449e602fa10 mt76: Convert to DEFINE_SHOW_ATTRIBUTE b22977c2727d mt76: mt7663s: remove max_tx_fragments limitation Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: update sta connection monitor regression fixFelix Fietkau2020-09-231-15/+27
| | | | | | Reset the connection monitor on all acked frames Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix regression in station connection monitor optimizationFelix Fietkau2020-09-211-0/+26
| | | | | | | | | When the nulldata frame was acked, the probe send count needs to be reset, otherwise it will keep increasing until the connection is considered dead, even though it fine. Reported-by: Georgi Valkov <gvalkov@abv.bg> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: select the first available channel for 5GHz interfacesDavide Fioravanti2020-09-201-2/+2
| | | | | | | | | | Some 5GHz wifi interfaces, especially in Tri-band routers, can't use channel 36. In these cases, the default configuration for 5GHz interfaces, once enabled, doesn't work. This patch selects the first non-disabled channel for 5GHz interfaces. Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
* kernel: drop kmod-bmp085, kmod-bmp085-i2c and kmod-bmp085-spiAleksander Jan Bajkowski2020-09-181-47/+0
| | | | | | | | | | CONFIG_BMP085* is replaced by CONFIG_BMP280 since 4.9[1] and this package is empty. OpenWRT also has kmod-iio-bmp280* package and we can drop old packages. 1. [ misc: retire the old BMP085 driver ] (https://github.com/torvalds/linux/commit/832c8232dd7be4977ae9fb9c7cbc4decce19a8fc#diff-5000d544d790c669405eb2a6775e5981) Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* kernel: add module support Intel Ethernet Controller I225 SeriesTan Zien2020-09-181-0/+15
| | | | | | add kernel module igc support Intel Ethernet Controller I225 Series. Signed-off-by: Tan Zien <nabsdh9@gmail.com>
* mt76: update to the latest versionFelix Fietkau2020-09-181-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 3b946a6dc588 mt76: dma: cache dma map address/len in struct mt76_queue_entry c4c8b6a20d3b mt76: mt7915: fix HE BSS info 15391c1c947f mt76: fix tx hang on non-AQL frame limit 72c8a81e64e8 mt76: mt7915: fix encap offload multicast traffic with 4-address mode 69b3f868d14b mt76: mt7915: use napi_consume_skb to bulk-free tx skbs 5f080033ec7d mt76: move txwi handling code to dma.c, since it is mmio specific b1f425686125 mt76: mt7915: fix VHT LDPC capability 8f48855f5d14 mt76: mt7915: simplify mt7915_lmac_mapping cfaf40858718 mt76: mt7915: fix queue/tid mapping for airtime reporting 115b62efac21 mt76: remove retry_q from struct mt76_txq and related code e22c65cdc585 mt76: mt7915: simplify checks for the 802.3 offload path bab866a01e4f mt76: mt7915: fix unexpected firmware mode 0fc3c5eb61d0 mt76: dma: queue more rx frames internally before passing them to the stack 130e5de09364 Revert "mt76: dma: queue more rx frames internally before passing them to the stack" e3af31409d41 update mt7915 firmware to the latest version e2b8a4ec9891 mt76: testmode: add a limit for queued tx_frames packets 146488631f7b mt76: mt7615: Remove set but unused variable 'index' 0b7d2b76288e mt76: mt7615: fix VHT LDPC capability 848f4a6334a8 mt76: mt7622: fix fw hang on mt7622 0a955d944bd0 mt76: mt7663s: do not use altx for ctl/mgmt traffic 13b96411513b mt76: mt7663s: split mt7663s_tx_update_sched in mt7663s_tx_{pick,update}_quota d62ba15b1bbf mt76: mt7663s: introduce __mt7663s_xmit_queue routine fdf14d1b6aec mt76: move pad estimation out of mt76_skb_adjust_pad d048f8e87ba0 mt76: mt7663s: fix possible quota leak in mt7663s_refill_sched_quota 979c0fdc5d27 mt76: mt7663s: introduce sdio tx aggregation 56e77a3a3ade mt76: mt7663: check isr read return value in mt7663s_rx_work f96cffa03e57 mt76: mt7615: unlock dfs bands 1ccd31bbe1f4 mt76: Use fallthrough pseudo-keyword 448cd2d36ee2 mt76: mt76x0: Move tables used only by init.c to their own header file 17ba3432f5af Revert "mt76: mt7615: unlock dfs bands" fee1f4a8e87f mt76: mt7915: fix possible memory leak in mt7915_mcu_add_beacon 5b78e5292777 mt76: Fix unsigned expressions compared with zero ec84891a4d23 mt76: mt7915: convert to use le16_add_cpu() Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: do not allow bigger VHT MPDUs than the hardware supportsFelix Fietkau2020-09-171-0/+34
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: allow bigger A-MSDU sizes in VHT, even if HT is limitedFelix Fietkau2020-09-161-0/+26
| | | | | | Improves tx throughput when connecting to some APs (e.g. Asus RT-AC88U) Signed-off-by: Felix Fietkau <nbd@nbd.name>
* cns3xxx: drop targetAdrian Schmutzler2020-09-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | This target has not been updated to 5.4 yet, and the only person trying it (Koen) decided to retreat based on the following reasons: - The target is not DT-aware at all - The huge amount of effort required - The SoC itself reached EoL at Cavium for some time now - Upstream removed some important parts as it's also slowly getting EoL over there - The commercial product that used this will fade out shortly - The amount of download for this binary suggest that the target is not that popular Since nobody has picked up the work since then, and this is the last remaining 4.19-only target, finally drop it now. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: improve the description of fs-nfs-v4Bob Cai2020-09-101-1/+1
| | | | | | | | | | | TITLE is "NFS4 filesystem client support" (Line 428) but the description is "Kernel module for NFS v4 support" (Line 438). Use "Kernel module for NFS v4 client support" on line 438. Signed-off-by: Bob Cai <1119283622@qq.com> [commit title/message facelift] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mac80211: update encap offload patches to the latest versionFelix Fietkau2020-09-0917-149/+1199
| | | | | | | Minor cleanup and code reorganization, along with a change to not disable offload anymore when a tkip or sw crypto key is added Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath25: add back target supportAdrian Schmutzler2020-09-061-3/+7
| | | | | | | | | | | | Discussion on the mailing list reveals that this target has active users. As we are finally able to upgrade this target to kernel 5.4, add it back to master. This reverts commit 7d29a5571403 ("ath25: drop target") and immediately moves the relevant files to 5.4, without touching the content. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mac80211: add preliminary support for enabling 802.11ax in configFelix Fietkau2020-09-041-12/+37
| | | | | | No advanced features are configurable yet, just basic enabling of HE modes Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove obsolete kernel version switches for 4.14Adrian Schmutzler2020-09-0223-1083/+34
| | | | | | | | | | This removes switches dependent on kernel version 4.14 as well as several packages/modules selected only for that version. This also removes sched-cake-virtual, which is not required anymore now that we have only one variant of cake. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* samsung: drop targetAdrian Schmutzler2020-09-021-2/+2
| | | | | | | | | This target is still on kernel 4.14, and no attempt has been made to update it to a newer kernel. Since we already are two LTS versions ahead of that the target is dropped, as the chance of somebody bumping it will only decrease with time. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath25: drop targetAdrian Schmutzler2020-09-021-7/+3
| | | | | | | | | | | | | This target still only works with kernel 4.14, and not so recent attempts of getting newer kernel versions supported did not lead to success. Therefore, drop the target, as we are already two LTS kernel versions ahead and it does not seem like anybody will pick up the work. Patchwork series: https://patchwork.ozlabs.org/project/openwrt/list/?series=169991&state=* Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mac80211: remove an obsolete patch that is no longer doing anything usefulFelix Fietkau2020-09-018-32/+17
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add more AQL fixes/improvementsFelix Fietkau2020-09-012-0/+72
| | | | | | Fix aggregation length estimation, add HE and VHT160 support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* treewide: https for downloads.openwrt.org sourcesPaul Spooren2020-08-312-2/+2
| | | | | | | Instead of using http and https for source downloads from downloads.openwrt.org, always use https for it's better security. Signed-off-by: Paul Spooren <mail@aparcar.org>
* leds: add activity led trigger kernel module packageSven Wegener2020-08-301-0/+14
| | | | | | | The activity trigger flashes like the heartbeat trigger, but adjusts based on system load. Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
* mac80211: Fix potential endless loopHauke Mehrtens2020-08-301-0/+31
| | | | | | Backport a fix from kernel 5.8.3. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ar71xx: drop targetAdrian Schmutzler2020-08-304-42/+7
| | | | | | | | | | This target has been mostly replaced by ath79 and won't be included in the upcoming release anymore. Finally put it to rest. This also removes all references in packages, tools, etc. as well as the uboot-ar71xx and vsc73x5-ucode packages. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mt76: update to the latest versionFelix Fietkau2020-08-251-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | f0beb7cbc443 mt76: mt7663u: fix memory leaks in mt7663u_probe 90c8422d3f56 mt76: mt7915: fix typo in function name 9cbbe4a30eaf mac80211: simplify TX aggregation start 974486ec2642 util: in worker setup, only overwrite function pointer if not NULL 519510277a8b mt76: initialize tx worker function earlier 3c361b1e3f4e mt76: mt7663u: fix dma header initialization e8d489647c7f mt76: usb: fix use of q->head and q->tail 8124daf53130 mt76: sdio: fix use of q->head and q->tail 3c2cd8580377 mt76: unify queue tx cleanup code 780cdabb8659 mt76: remove qid argument to drv->tx_complete_skb 05aa857861fc mt76: remove swq from struct mt76_sw_queue e861cb051833 mt76: rely on AQL for burst size limits on tx queueing 3218b914a2fb mt76: remove struct mt76_sw_queue 23529b5e93c1 mt76: mt7603: tune tx ring size f6ca436ebea4 mt76: mt76x02: tune tx ring size 97e65131440c mt76: mt7603: check for single-stream EEPROM configuration 957b6c5ac273 mt76: mt7615: fix MT_ANT_SWITCH_CON register definition 96a541eedda9 mt76: mt7615: fix antenna selection for testmode tx_frames b36d7ae096a3 mt76: mt7603: move number of streams detection to eeprom init Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 21:51:32 +0000