aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: backport MBSSID supportFelix Fietkau2022-03-185-7/+554
| | | | | | Required for an upcoming mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2022-03-151-4/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 378b638c70c0 mt76: mt7915: fix unused variable with testmode disabled 4f4309542862 mt76: mt7915: only use u32_get_bits with constant value de06d828a0bf mt76: mt7921: fix injected MPDU transmission to not use HW A-MSDU c007ba3ec7a9 mt76: mt7915: simplify conditional 64c74dc93f68 mt76: fix dfs state issue with 160 MHz channels d3471b0d92c1 mt76: mt7615: honor ret from mt7615_mcu_restart in mt7663u_mcu_init f4c87b32e0e9 mt76: mt7663u: introduce mt7663u_mcu_power_on routine 82de5987af54 mt76: mt7921: fix up the monitor mode c501df4086e1 mt76: mt7921: use mt76_hw instead of open coding it 594ee03d5a11 mt76: mt7915: fix DFS no radar detection event d8d2b383a241 mt76: split single ldpc cap bit into bits 0f336fba20fe mt76: mt7921: make mt7921_init_tx_queues static 00a066ce9914 mt76: mt7921: fix xmit-queue dump for usb and sdio d6d2479568b2 mt76: mt7921: fix mt7921_queues_acq implementation d17b74420199 mt76: fix monitor mode crash with sdio driver c374559eae6f mt76: mt7915: allow beaconing on all chains b219af63b9ce mt76: connac: add 6 GHz support for wtbl and starec configuration 630384cb3246 mt76: mt7915: add 6 GHz support 28ff1bddc7e8 mt76: mt7915: fix eeprom fields of txpower init values d4b226cc15e7 mt76: mt7915: add txpower init for 6GHz 31e820d4ce4b mt76: mt7921: get rid of mt7921_wait_for_mcu_init declaration 9fee1faf6028 mt76: mt7915: check for devm_pinctrl_get() failure 31a970940b97 mt76: connac: make read-only array ba_range static const e49af7036bbc mt76: use le32/16_get_bits() whenever possible 0664d39039c2 mt76: fix invalid rssi report f16fc9d96105 mt76: mt7915: set band1 TGID field in tx descriptor 67ce2708dcef mt76: mt7915: fix beamforming mib stats 6e899abec818 mt76: mt7915: fix phy cap in mt7915_set_stream_he_txbf_caps() c6780c85cff2 mt76: mt7915: fix typos in comments aa6eadc09a83 mt76: usb: add req_type to ___mt76u_rr signature 74a519ab8353 mt76: usb: add req_type to ___mt76u_wr signature 2651d2c66cbd mt76: usb: introduce __mt76u_init utility routine c03e095eee27 mt76: mt7921: disable runtime pm for usb 41085cdcd7e3 mt76: mt7921: update mt7921_skb_add_usb_sdio_hdr to support usb e700aba6bae3 mt76: mt7921: move mt7921_usb_sdio_tx_prepare_skb in common mac code 056b7f4ebcc6 mt76: mt7921: move mt7921_usb_sdio_tx_complete_skb in common mac code. 0abf682a3def mt76: mt7921: move mt7921_usb_sdio_tx_status_data in mac common code. b0c60d5252de mt76: mt7921: add mt7921u driver 053668acdaf8 mt76: mt7921: move mt7921_init_hw in a dedicated work Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: headers: fix lockdep_assert_not_held()Petr Štetiar2022-03-152-1/+40
| | | | | | | | | | | | | | LOCK_STATE_HELD define was omitted during backport of lockdep_assert_not_held() which leads to build failures of kernels with CONFIG_LOCKDEP=y: backports-5.15.8-1/backport-include/linux/lockdep.h:16:47: error: 'LOCK_STATE_HELD' undeclared (first use in this function) Fix it by adding missing LOCK_STATE_HELD define. References: PR#9373 Reported-by: Oskari Rauta <oskari.rauta@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel/modules: add kmod-inet-diag packageTianling Shen2022-03-131-0/+25
| | | | | | | Add option to compile kmod-inet-diag, support for INET (TCP, DCCP, etc) socket monitoring interface used by native Linux tools such as ss. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* bpf-headers: ship a modified version of stdarg.h from musl to fix ebpf build ↵Felix Fietkau2022-03-072-0/+22
| | | | | | on glibc Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: kmod-tcp-scalable: add scalable tcp congestion algorithmCatalin Toda2022-03-011-0/+18
| | | | Signed-off-by: Catalin Toda <catalinii@gmail.com>
* netfilter: add kmod-nft-tproxyYousong Zhou2022-02-281-0/+11
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* netfilter: add kmod-nft-socketYousong Zhou2022-02-281-0/+11
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* netfilter: separate packages for kmod-ipt-socket and kmod-ipt-tproxyYousong Zhou2022-02-281-1/+38
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* mac80211: add #if guards against 5.4 compile failuresChristian Lamparter2022-02-253-8/+14
| | | | | | | | | | | | | | | | | Both struct net_device_path_ctx and struct net_device_path are not available in 5.4. This causes an build error on the bcm63xx target. |mac80211/driver-ops.h: In function 'drv_net_fill_forward_path': |driver-ops.h:1502:57: error: passing argument 4 of |'local->ops->net_fill_forward_path' from incompatible pointer type | [-Werror=incompatible-pointer-types] | 1502 | ctx, path); | | ^~~ | | | | | struct net_device_path_ctx * Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: package ramoops pstore-ram crash log storageHannu Nyman2022-02-242-0/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Package the ability to log kernel crashes to 'ramoops' pstore files into RAM in /sys/fs/pstore Reference to the ramoops admin guide in upstream Linux: https://www.kernel.org/doc/html/v5.10/admin-guide/ramoops.html The files in RAM survive a warm reboot, but not a cold reboot. Note: kmod-ramoops selects kmod-pstore and kmod-reed-solomon. The feature can be used by selecting the kmod-ramoops and adding a ramoops reserved-memory definition to the device DTS. Example from R7800: reserved-memory { rsvd@5fe00000 { reg = <0x5fe00000 0x200000>; reusable; }; ramoops@42100000 { compatible = "ramoops"; reg = <0x42100000 0x40000>; record-size = <0x4000>; console-size = <0x4000>; ftrace-size = <0x4000>; pmsg-size = <0x4000>; }; }; If no definition has been made in DTS, no crash log is stored for the device. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (added CONFIG_EFI_VARS_PSTORE disable)
* mac80211: add debug compile option for rtw88 devicesFlorian Eckert2022-02-201-0/+18
| | | | | | | | | | | | | This commit adds the following package compile options. CONFIG_PACKAGE_RTW88_DEBGUG: Compile the driver with additional debug logging output CONFIG_PACKAGE_RTW88_DEBGUGFS: Add the possibility to map information about the driver rtw88 into debugfs. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* kernel: add kmod-hwmon-lm70 supportChristian Lamparter2022-02-191-0/+17
| | | | | | | | package hwmon's lm70.ko. This module supports the National Semiconductor/TI LM70,LM71,LM74 and TI TMP121,TMP122,TMP123 and TMP124 chips (all SPI). Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ksmbd: add out-of-tree moduleRosen Penev2022-02-192-0/+84
| | | | | | | | | | | | | ksmbd is an upstream linux alternative to Samba which is lighterweight and more performant, especially on underpowered devices. Moving it here from the packages feed as it is now an upstream kernel module. Also easier to update as version updates can be coordinated better The next LTS kernel (5.15) has this included. A depend on kernel < 5.15 will need to be added later. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* linux/modules: split up oid_registryRosen Penev2022-02-192-2/+12
| | | | | | This will be needed by ksmbd in a following commit. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* gpio-nxp-74hc153: remove packageMauri Sandberg2022-02-193-327/+0
| | | | | | | This module was used solely by Buffalo WZR-HP-G300NH devices and has become obsolete with the introduction of gpio-cascade. Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
* kernel: add package kmod-gpio-cascadeMauri Sandberg2022-02-191-0/+20
| | | | | | | Adds kernel module for Generic GPIO cascade. Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi> Signed-off-by: Petr Štetiar <ynezz@true.cz> [missing commit description]
* kernel: add package kmod-multiplexerMauri Sandberg2022-02-191-0/+34
| | | | | | | Adds new kernel module for GPIO controlled multiplexer support. Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi> Signed-off-by: Petr Štetiar <ynezz@true.cz> [missing commit description]
* mt76: update to the latest versionFelix Fietkau2022-02-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | ddd3c2f38b30 mt76: redefine mt76_for_each_q_rx to adapt mt7986 changes 7fa5229a4228 mt76: improve signal strength reporting 025a72cd2d24 mt76: mt7915: fix injected MPDU transmission to not use HW A-MSDU 8c765fd92d97 mt76: mt7615: introduce SAR support 799a15bb68f9 mt76: fix endianness errors in reverse_frag0_hdr_trans c114919f0c08 mt76: mt7915: Fix channel state update error issue 93191a37e59a mt76: mt7915: fix potential memory leak of fw monitor packets cde589b2efb7 mt76: mt7921s: fix missing fc type/sub-type for 802.11 pkts 6ef22f4dc4e4 mt76: mt7915: add support for MT7986 7f1818cd8f2d mt76: mt7915: introduce band_idx in mt7915_phy 1d57a0d506db mt76: mt7915: initialize smps mode in mt7915_mcu_sta_rate_ctrl_tlv() 1f2a4816a3de mt76: mt7615: fix compiler warning on frame size d60f335e785b mt76: mt7915: fix endianness warnings in mt7915_debugfs_rx_fw_monitor d0ab636cb61c mt76: mt7915: fix endianness warnings in mt7915_mac_tx_free() 9d9bd7b3c48c mt76: connac: adjust wlan_idx size from u8 to u16 be1091f1172d mt76: mt7615: Fix assigning negative values to unsigned variable d4fc42889a30 mt76: mt7915: check band idx for bcc event 98ee3e2889ea mt76: mt7915: fix logic error and remove the unused member of mt7915_dev bbbbafb67bac mt76: mt7915: fix compiler warning abd80cf68db1 mt76: mt7915: fix the muru tlv issue a050c14b5631 mt76: mt7915: use min_t() to make code cleaner 9fee8f3736eb mt76: mt7915e: Fix degraded performance after temporary overheat f2e1a62cf0d0 mt76: mt7915e: Add a hwmon attribute to get the actual throttle state. c67df0d3130a mt76: mt7915e: Enable thermal management by default Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix traffic stalls on forwarded mesh packets due to wrong AC selectionFelix Fietkau2022-02-151-0/+50
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix rekey failure in drivers with 802.3 decap offloadFelix Fietkau2022-02-121-0/+43
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bpf-headers: fix build error when testing kernel is usedAnsuel Smith2022-02-061-0/+3
| | | | | | | | | | | | Now that we have separate files for each kernel version, only the version/hash for the target kernel are available. This cause a missing hash error (and wrong kernel version) for bpf-headers when a testing kernel version is used for the current target. Fix this error by manually including the kernel version/hash file for the specific kernel version requested. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* kernel: usb: remove left-over LINUX_5_10 dependency symbolChristian Lamparter2022-02-041-1/+1
| | | | | | | | this should have been removed together with linux 5.4 APM821XX support. Currently, this didn't hurt or broke something. But it will in the next stable kernel release. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* bpf-headers: fix build error from within the SDKFelix Fietkau2022-02-041-0/+1
| | | | | | | | The SDK does not ship the generic platform files. Use relative path for GENERIC_PLATFORM_DIR to make it work. This points it at the files from the feed directory instead of the base SDK path Signed-off-by: Felix Fietkau <nbd@nbd.name>
* om-watchdog: Drop unused packageSven Eckelmann2022-02-033-87/+0
| | | | | | | All devices which used this package migrated to the kernel GPIO-line watchdog driver and configure it over their DT. Signed-off-by: Sven Eckelmann <sven@narfation.org>
* mt76: update to the latest versionFelix Fietkau2022-02-031-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 833b9d7fcf7f mt76: allow drivers to drop rx packets early f703084f31cb mt76: mt7915: process txfree and txstatus without allocating skbs 047b9a9e78b3 mt76: mt7615: in debugfs queue stats, skip wmm index 3 on mt7663 fea36e02075c mt76: only kick tx queue if frames were queued 8381e54ebfb5 linux-firmware: update firmware for MT7921 WiFi device d57dadb8c861 Revert "mt76: only kick tx queue if frames were queued" 3a21d6e2153b mt76: mt7663: disable 4addr capability f1d66cf7a6c5 mt76: connac: fix possible NULL pointer dereference in mt76_connac_get_phy_mode_v2 c9a4146404d4 sync with upstream 4ed8c910b94e mt76: mt7921: fix possible resume failure bf105aa6cd2f mt76: mt7921: fix network buffer leak by txs missing e2b454b6fb30 mt76: connac: introduce MCU_EXT macros 5a87f5497c9b mt76: connac: align MCU_EXT definitions with 7915 driver 720ddc32507d mt76: connac: remove MCU_FW_PREFIX bit da5128a59eda mt76: connac: introduce MCU_UNI_CMD macro 116109bee7cb mt76: connac: introduce MCU_CE_CMD macro f96fbdf038d5 mt76: connac: rely on MCU_CMD macro 922f0d408413 mt76: mt7915: rely on mt76_connac definitions b4ae1da1d1e0 mt76: mt7921: reduce log severity levels for informative messages db105a722b87 mt76: mt7921s: make pm->suspended usage consistent e2cc063238c0 mt76: mt7921s: fix suspend error with enlarging mcu timeout value 812b73f2f1e0 mt76: mt7915: introduce mt76_vif in mt7915_vif b041a8a30055 mt76: mt7915: add mu-mimo and ofdma debugfs knobs b851a3e7839d mt76: mt7921: remove dead definitions 266c7a9f2994 mt76: connac: rely on le16_add_cpu in mt76_connac_mcu_add_nested_tlv 19cc7d83190c mt76: mt7921: clear pm->suspended in mt7921_mac_reset_work 928c4550e413 mt76: mt7921s: make pm->suspended usage consistent [update] 8d6c68a7d0d1 mt76: mt7921: fix possible resume failure [update] 26fb105e538c mt76: mt7921s: fix cmd timeout in throughput test 9db482264389 mt76: mt7921: fix build regression 3edb87cdf138 mt7915: formatting change to sync with upstream 5cad38ba247d mt76: mt7915: add mt7915_mmio_probe() as a common probing function 15f9f88b362a mt76: mt7915: refine register definition de49cf43ef34 mt76: add MT_RXQ_MAIN_WA for mt7916 6032c35f1306 mt76: mt7915: rework dma.c to adapt mt7916 changes 074d7c5381ed mt76: mt7915: add firmware support for mt7916 27b3253318e7 mt76: mt7915: rework eeprom.c to adapt mt7916 changes 030540246088 mt76: mt7915: enlarge wcid size to 544 400129c69f91 mt76: mt7915: add txfree event v3 cbbb3f65fcd0 mt76: mt7915: update rx rate reporting for mt7916 eb51c4deef0e mt76: mt7915: update mt7915_chan_mib_offs for mt7916 fb4709222028 mt76: mt7915: add mt7916 calibrated data support e758feeaf1d6 mt76: mt7915: add device id for mt7916 115ea27a5cab mt76: connac: fix sta_rec_wtbl tag len b3f922266685 mt76: mt7915: rely on mt76_connac_mcu_alloc_sta_req bac5eda1f5b2 mt76: mt7915: rely on mt76_connac_mcu_alloc_wtbl_req b44485d5c8ac mt76: mt7915: rely on mt76_connac_mcu_add_tlv routine 9cc58e254d53 mt76: connac: move mt76_connac_mcu_get_cipher in common code 60dcd9f09ff6 mt76: connac: move mt76_connac_chan_bw in common code a8d0b7d0cc60 mt76: mt7915: rely on mt76_connac_get_phy utilities 4441db30c1c1 mt76: connac: move mt76_connac_mcu_add_key in connac module 794b6f18d0fb mt76: mt7915: fix code defect 9d2a01b6cb60 mt76: set wlan_idx_hi on mt7916 2c89977b32c2 mt76: mt7915: fix kernel build warning 6c4874839830 mt76: make mt76_sar_capa static 215fdcc7ca6c mt76: mt7915: use proper aid value in mt7915_mcu_wtbl_generic_tlv in sta mode bc254718b40e mt76: mt7915: use proper aid value in mt7915_mcu_sta_basic_tlv 22fcff5ff21a mt76: sdio: lock sdio when it is needed 4669882aa595 mt76: mt7921s: clear MT76_STATE_MCU_RUNNING immediately after reset 944545855e0f mt76: mt7921s: update mt7921s_wfsys_reset sequence 854c8d076a34 mt76: mt7915: move pci specific code back to pci.c a77da27796f2 mt76: mt7915: fix warning: variable 'base' is used uninitialized 7b5e69961c71 mt76: mt7915: fix warning: variable 'flags' set but not used b5138e7b89f9 mt76: mt7921: fix a possible race enabling/disabling runtime-pm af218fbe2500 linux-firmware: update firmware for MT7921 WiFi device 31c19c467950 mt76: mt7915: remove duplicated defs in mcu.h 9198eca1b16f mt76: connac: move mt76_connac_mcu_bss_omac_tlv in connac module 829d87a93a51 mt76: connac: move mt76_connac_mcu_bss_ext_tlv in connac module 50956cf17901 mt76: connac: move mt76_connac_mcu_bss_basic_tlv in connac module bda40f4e1d5e mt76: mt7915: rely on mt76_connac_mcu_sta_ba_tlv 4728939c1d48 mt76: mt7915: rely on mt76_connac_mcu_wtbl_ba_tlv e3ae1828068b mt76: mt7915: rely on mt76_connac_mcu_sta_ba d9e9989eca07 mt76: mt7915: rely on mt76_connac_mcu_wtbl_generic_tlv 168713595fff mt76: mt7915: rely on mt76_connac_mcu_sta_basic_tlv 60394d3e3504 mt76: mt7915: rely on mt76_connac_mcu_sta_uapsd 3a79454d078d mt76: mt7915: rely on mt76_connac_mcu_wtbl_smps_tlv 9ae9aa6c1aea mt76: mt7915: rely on mt76_connac_mcu_wtbl_ht_tlv fd8cdfab91e4 mt76: mt7915: rely on mt76_connac_mcu_wtbl_hdr_trans_tlv a92024c5a5b5 mt76: connac: move mt76_connac_mcu_wtbl_update_hdr_trans in connac module 6dc585a3a274 mt76: connac: introduce is_connac_v1 utility routine 0f29d2aa5a72 mt76: connac: move mt76_connac_mcu_set_pm in connac module dcf408ff8a5e mt76: mt7921: get rid of mt7921_mcu_get_eeprom 77b2a8601fc1 mt76: mt7915: rely on mt76_connac_mcu_start_firmware 65f78dee243a mt76: connac: move mt76_connac_mcu_restart in common module 5adf5b14040b mt76: mt7915: rely on mt76_connac_mcu_patch_sem_ctrl/mt76_connac_mcu_start_patch 69bf1dabe78f mt76: mt7915: rely on mt76_connac_mcu_init_download 951b1ddd370e mt76: connac: move mt76_connac_mcu_gen_dl_mode in mt76-connac module 0826b3992238 mt76: mt7915: rely on mt76_connac_mcu_set_rts_thresh 058de6d36fa9 mt76: connac: move mt76_connac_mcu_rdd_cmd in mt76-connac module aafda86aed2b mt76: mt7921e: make dev->fw_assert usage consistent def12bef91a3 mt76: mt7921: forbid the doze mode when coredump is in progress 009414d27d37 mt76: mt76_connac: fix MCU_CE_CMD_SET_ROC definition error 3c5856eca223 mt76: mt7921: set EDCA parameters with the MCU CE command 01a3d73b452e mt76: mt7615: fix a possible race enabling/disabling runtime-pm 123ed864d1ae mt76: mt7921e: process txfree and txstatus without allocating skbs 018f98abba68 mt76: connac: add support for passing the cipher field in bss_info 288e7443e35c mt76: mt7615: update bss_info with cipher after setting the group key 36e1577cb3d3 mt76: mt7915: update bss_info with cipher after setting the group key d42590d8fcc8 mt76: make cipher in struct mt76_vif u8 instead of enum 11602b8505c6 mt76: mt7615e: process txfree and txstatus without allocating skbs 2ef775c10bd3 linux-firmware: add firmware for MT7916 976ea3879730 mt76: mt7915: add support for passing chip/firmware debug data to user space d11bd7bd83f4 tools: add support for sending firmware debug data via udp dc8e2e8dcd34 mt76: mt7921: do not always disable fw runtime-pm 7063127f852b mt76: mt7921: fix a leftover race in runtime-pm f78f4334b0b2 mt76: mt7615: fix a leftover race in runtime-pm f1f94d19c160 mt76: mt7915: fix ht mcs in mt7915_mac_add_txs_skb() c2ff2f0d6d19 mt76: mt7921: fix ht mcs in mt7921_mac_add_txs_skb() 3e7954a0b32e mt76: mt7921s: fix mt7921s_mcu_[fw|drv]_pmctrl 3c2cc9034376 mt76: mt7921e: fix possible probe failure after reboot f7f6c6dcc6eb mt76: mt7921: fix crash when startup fails. 8656198c925b mt76: sdio: disable interrupt in mt76s_sdio_irq 6204d61ab821 mt76: mt7921: fix endianness issues in mt7921_mcu_set_tx() 68c5aa56f5f2 mt76: mt7921: toggle runtime-pm adding a monitor vif 541e4e8d3c3e mt76: mt7915: set bssinfo/starec command when adding interface 78770f741af9 mt76: mt7915: introduce mt7915_set_radar_background routine 93c03778f92e mt76: mt7915: enable radar trigger on rdd2 4c76a6c3a1f2 mt76: mt7915: introduce rdd_monitor debugfs node 5b94045f927e mt76: mt7915: report radar pattern if detected by rdd2 22094b27ff6a mt76: mt7915: enable radar background detection 4282ca57a143 mt76: connac: move mt76_connac_lmac_mapping in mt76-connac module 0f16c67657a2 mt76: mt7915: add missing DATA4_TB_SPTL_REUSE1 to mt7915_mac_decode_he_radiotap 9a16d33311a7 mt76: mt7921: remove duplicated code in mt7921_mac_decode_he_radiotap 639b55fdc95e mt76: mt7615: add support for LG LGSBWAC02 (MT7663BUN) ebbd2717a16e mt76: mt7663s: flush runtime-pm queue after waking up the device 37c3bf2256de mt76: mt7603: check sta_rates pointer in mt7603_sta_rate_tbl_update 96959bd15eef mt76: mt7615: check sta_rates pointer in mt7615_sta_rate_tbl_update 4e42e55ce636 mt76: stop the radar detector after leaving dfs channel 8b32439d5a86 mt76: mt7915: fix possible memory leak in mt7915_mcu_add_sta b4e6f0d6f15a mt76: mt7921s: fix a possible memory leak in mt7921_load_patch 15398f1e8385 mt76: mt7915: fix mcs_map in mt7915_mcu_set_sta_he_mcs() 607eda6eb032 mt76: mt7915: update max_mpdu_size in mt7915_mcu_sta_amsdu_tlv() 69d20f2e6cb0 mt76: mt7915: fix the nss setting in bitrates c3ffa536249a mt76: sdio: honor the largest Tx buffer the hardware can support e3e3562f8fa0 mt76: mt7921s: run sleep mode by default 553200cf63fd firmware: update mt7662 firmware to version 2.3 20d1fed838b9 mt76x02: improve mac error check/reset reliability 9b2ac62d6f31 mt76: mt76x02: improve tx hang detection fae295af31eb mt76: mt7915: fix/rewrite the dfs state handling logic e0f9479bf893 mt76: mt7615: fix/rewrite the dfs state handling logic 822e1135e7e1 mt76: mt76x02: use mt76_phy_dfs_state to determine radar detector state f8c0ed1e6bdf mt76: do not always copy ethhdr in reverse_frag0_hdr_trans ab9b8078427a mt76: dma: initialize skip_unmap in mt76_dma_rx_fill Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport support for background radar detectionFelix Fietkau2022-02-039-12/+1627
| | | | | | Will be used in an upcoming mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport MBSSID/EMA support patchesFelix Fietkau2022-02-033-16/+771
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: reorganize patchesFelix Fietkau2022-02-0312-0/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport support for ndo_fill_forward_pathFelix Fietkau2022-02-031-0/+172
| | | | | | Will be used in an upcoming mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netfilter: add kmod-nft-compatEtienne Champetier2022-02-021-0/+11
| | | | | | This modules is required by iptables-nft Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kernel: add kmod-vrfMarek Behún2022-02-011-0/+17
| | | | | | | | | | | Add option to compile kmod-vrf, support for Virtual Routing and Forwarding (Lite). This module depends on NET_L3_MASTER_DEV, which is a boolean kernel option, so we need to create a configuration option also for this, and make kmod-vrf depend on it. Signed-off-by: Marek Behún <kabel@kernel.org>
* kernel: Make kmod-usb-net-lan78xx depend on kmod-of-mdioHauke Mehrtens2022-02-011-1/+1
| | | | | | | kmod-usb-net-lan78xx depends on kmod-of-mdio when this package is activated. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* netfilter: correct some dependenciesTiago Gaspar2022-01-271-2/+2
| | | | | | | | | | | | nf-nathelper-extra and nf-conntrack-netlink had iptables related dependencies, yet, when looking for the respective kernel symbols and checking it's dependencies it was confirmed that iptables wasn't required and that these were either it's own moodule or tool independent (nftables or iptables). Correct these and make sure no unneeded extras are pulled in. Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com>
* ltq-vdsl-mei: Remove static linkingHauke Mehrtens2022-01-211-0/+47
| | | | | | | | | This removes -static compile option. The -static option tells GCC to link this statically with the libc, which we do not want in OpenWrt. We want to link everything dynamically to the libc. This fixes a compile problem with glibc. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add missing kmod+regmap-i2c dependency for NCT7802Y moduleChristian Lamparter2022-01-151-1/+1
| | | | | | | | | | x86, mt7623 and others buildbot failed due to: |Package kmod-hwmon-nct7802 is missing dependencies for the following libraries: |regmap-core.ko |regmap-i2c.ko Fixes: 1ed50b92d157 ("package: kernel: add driver module for NCT7802Y") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mvebu: cortexa9: Add support for Ctera C200-V2Pawel Dembicki2022-01-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2-Bay NAS - maximum two 3.5" Harddisks Hardware: - SoC: Marvell 88F6707-A1 ARMv7 Processor 1,2GHz (ARMADA 370 SoC) - Ram: 1GB (2x Nanya NT5CC512M8DN-D1) - NAND Flash: 256MB (ESMT F59L2G81A-25T) - Lan: 1x GBE (Marvell 88E1318-NNB2) - Storage: 2x SATA HDD 3.5" Slot - USB: 2x USB 3.0 port (Renesas uPD720202) - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND) - LEDs: 13x GPIO controlled - Buttons: 2x GPIO controlled Known issues: - Buzzer is unused due lack of proper driver - USB1/2 usbport ledtrigger won't work (through DT) - Renesas uPD720202 requires firmware file. It's possible to find non-free binary. Please look for 'UPDATE.mem' file and put in into '/lib/firmware/renesas_usb_fw.mem' file. Installation: - Apply factory initramfs image via stock web-gui. - Do sysupgrade to make installation complete. Back to stock: - OpenWrt rootfs partition use unused space after stock firmware. - Full revert is possible. - Login via ssh and run: ## ctera_c200-v2_back_to_factory start ## . /lib/functions.sh part=$(find_mtd_part "active_bank") active_bank=$(strings "$part" | grep bank) if [ "$active_bank" = "bank1" ]; then echo "bank2" > /tmp/change_bank else echo "bank1" > /tmp/change_bank fi mtd write /tmp/change_bank active_bank reboot ## ctera_c200-v2_back_to_factory end ## Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> (put back-to-stock script into commit message, removed dup. SUBPAGESIZE var, added 01_leds for non-working dt-usb-port trigger) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* package: kernel: add driver module for NCT7802YPawel Dembicki2022-01-151-0/+15
| | | | | | | | | | | | This commit add package with hwmon-nct7802 module. This driver implements support for the Nuvoton NCT7802Y hardware monitoring chip. NCT7802Y supports 6 temperature sensors, 5 voltage sensors, and 3 fan speed sensors. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> (fixed c&p'ed module description) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: add kmod-usb-net-lan78xxJosef Schlehofer2022-01-081-0/+17
| | | | | | | | | | | | | | | | | Add kernel module for Microchip LAN78XX based USB 2 & USB 3 10/100/1000 Ethernet adapters. [1] This kernel module is required for the Seeed Studio's Mini Router based on RPI CM4 [2]. [1] <https://cateee.net/lkddb/web-lkddb/USB_LAN78XX.html> [2] <https://www.seeedstudio.com/Dual-GbE-Carrier-Board-with-4GB-RAM-32GB-eMMC-RPi-CM4-Case-p-5029.html> Link: <https://github.com/openwrt/openwrt/pull/4893> Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (added kmod-phy-microchip and kmod-fixed-phy dependencies, rpi3 needs lan78xx but has it built-in) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: provide kmod-fixed-phy as separate kmodChristian Lamparter2022-01-081-2/+17
| | | | | | | | | | Almost all targets have the fixed-phy feature built into the kernel. One big exception is x86. This caused a problem with the upcoming LAN78xx usb driver. Hence this patch breaks out the fixed-phy from of_mdio (which didn't include the .ko) and puts into a separate module. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: add kmod-phy-microchipChristian Lamparter2022-01-081-0/+15
| | | | | | | | phy drivers for Microchip's LAN88xx PHYs. This is needed for the "LAN7801" variant of the upstream lan78xx usb ethernet driver. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* linux-firmware: add new package r8152-firmwareMarty Jones2022-01-081-0/+1
| | | | | | | | | | | | | | Linux upstream commit https://github.com/torvalds/linux/commit/9370f2d05a2a150b0aa719a3070b26d478180df3 add load firmware file through request_firmware,this affect the nanopi r2s and some USB adapters in kernel 5.10 with this error: 'r8152 4-1:1.0: unable to load firmware patch rtl_nic/rtl8153b-2.fw' This patch split the USB NIC firmware files from r8169 firmware, and adds r8152-firmware to r8152 driver. Add kmod-usb-net-cdc-ncm to support RTL8156A and RTL8156B 2.5G ethernet adapters supported since v5.13-rc1. https://github.com/torvalds/linux/commit/195aae321c829dd1945900d75561e6aa79cce208 Signed-off-by: Marty Jones <mj8263788@gmail.com>
* ltq-ifxos: update to 1.7.1Jan Hoffmann2022-01-086-234/+34
| | | | | | Signed-off-by: Jan Hoffmann <jan@3e8.eu> [fix warnings, switch to tag tarball, update patches] Signed-off-by: Andre Heider <a.heider@gmail.com>
* ltq-vdsl: move to the default device name /dev/dsl_cpe_api/0Andre Heider2022-01-081-2/+2
| | | | | | | This makes patching it for ltq-vdsl-app unnecessary and paves the way for VRX518 support. Signed-off-by: Andre Heider <a.heider@gmail.com>
* ltq-deu: disable arc4 algorithmDaniel Kestrel2022-01-061-4/+4
| | | | | | | ARC4 was used for WEP, which is not secure anymore. Therefor it is disabled in the driver, but the code is not removed for now. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: add aes_gcm algorithmDaniel Kestrel2022-01-061-0/+313
| | | | | | | | | | | | The lantiq AES hardware does not support the gcm algorithm. But it can be implemented in the driver as a combination of the aes_ctr algorithm and the xor plus gfmul operations for the hashing. Due to the wrapping of the several algorithms and the inefficient 16 byte block by 16 byte block invokation in the kernel implementations, this driver is about 3 times faster for the larger block sizes. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: change PKG_RELEASE to AUTORELEASEDaniel Kestrel2022-01-061-1/+1
| | | | | | As per suggestion by adschm, PKG_RELEASE is set to AUTORELEASE. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: remove redundant code for setting the key in aesDaniel Kestrel2022-01-061-120/+4
| | | | | | | | | | After adding xts and cbcmac the aes algorithm source had three sections for setting the aes key to the hardware which are identical. Method aes_set_key_hw was created which is now called from within the spinlock secured control sections in methods ifx_deu_aes, ifx_deu_aes_xts and aes_cbcmac_final_impl and reduces the size of ifxmips_aes.c. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: add shash cbcmac-aes algorithm to the driverDaniel Kestrel2022-01-061-5/+362
| | | | | | | | | | | | | | | | | | | Since commit 53b6783 hostapd is using the kernel api which includes the cbcmac-aes shash algorithm. The kernels implementation is a wrapper around the aes encryption algorithm, which encrypts block (16 bytes) by block. When the ltq-deu driver is present, it uses hardware aes, but every 16 byte encrypt requires setting the key. This is very inefficient and is a huge overhead. Since the cbcmac-aes is simply a hash that uses the cbc aes algorithm starting with an iv set to x'00' with an optional ecb aes encryption of a possible last incomplete block that is padded with the positional bytes of the last cbc encrypted block, this algorithm is now added to the driver. Most of the code is derived from md5-hmac and tailored for aes. Tested with the kernels crypto testmgr including extra tests against the kernels generic ccm module implementation. This patch also fixes the overallocation in the aes_ctx that is caused by using u32 instead of u8 for the aes keys. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* ltq-deu: remove driver disablement for kernel 5.4 and aboveDaniel Kestrel2022-01-061-1/+1
| | | | | | | | Remove the dependency on kernel 5.4 from the Makefile to allow the driver to compile with kernel 5.10 or kernel versions higher than 5.4. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 08:28:58 +0000