aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel
Commit message (Collapse)AuthorAgeFilesLines
* mt76: update to the latest versionFelix Fietkau2019-01-251-3/+3
| | | | | | | | | | | | | | | | | | | | | 3e9a7d5 Revert "mt7603: fix txd q_idx field value" 815fd03 mt7603: fix CCA timing values b35cc8e mt7603: set timing on channel change before starting MAC 79b337c mt7603: move CF-End rate update to mt7603_mac_set_timing 3df341d mt7603: avoid redundant MAC timing updates 1c751f3 mt76: avoid scheduling tx queues for powersave stations 2efa389 mt7603: limit station power save queue length to 64 63a79ff mt76: do not report out-of-range rx nss fe30bd3 mt7603: issue PSE reset on tx hang ce8cc5d mt7603: issue PSE client reset on init e342cc5 mt7603: fix buffered multicast count register aa470d8 mt7603: fix buffered multicast queue flush b4ee01f mt76: fix tx status timeout processing 7d00d58 mt76x02: fix per-chain signal strength reporting 64abb35 mt76: fix corrupted software generated tx CCMP PN 0b939dc mt76: fix resetting software IV flag on key delete Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: ath10k: remove "ath10k: fix otp failure result" patchChristian Lamparter2019-01-241-11/+0
| | | | | | | | | | | | | | Initially this patch was introduced as a quick fix following the removal of 936-ath10k_skip_otp_check.patch which caused multiple ath10k pcie devices in various ipq806x and ar71xx/ath79 targets to malfunction. Thankfully, the affected devices have been updated to utilize the pre-caldata method. And finally with the switch to ath10k-ct, which never had the patch or any reports of similar issues, I think it's time to remove this patch since it is no longer needed. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mt76: update to the latest versionFelix Fietkau2019-01-201-3/+3
| | | | | | | | | | | | | | | d273ddd mt7603: fix number of frames limit in .release_buffered_frames 63bf183 mt76: add channel switch announcement support e45db12 mt7603: fix tx status info 9d11596 mt7603: discard bogus tx status data 4bcb2f9 mt7603: fix txd q_idx field value 4206db7 mt76: set IEEE80211_HW_NEEDS_UNIQUE_STA_ADDR flag c4e4982 mt7603: set IEEE80211_HW_TX_STATUS_NO_AMPDU_LEN 702f557 mt7603: use maximum tx count for buffered multicast packets 158529d mt7603: fix PSE reset retry sequence fc31457 mt7603: implement support for SMPS Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add support for indicating missing tx A-MPDU lengthFelix Fietkau2019-01-201-0/+121
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kmod-sched-cake: bump to latest cakeKevin Darbyshire-Bryant2019-01-141-3/+3
| | | | | | | | | | 331ac70 Correctly update parent qlen when splitting GSO packets 581967c Makefile: Hook into Kbuild/Kconfig infrastructure The parent qlen change is relevant if using cake as a leaf qdisc, the makefile is a no-op. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel/modules: Fix build of kmod-pmbusHauke Mehrtens2019-01-131-1/+1
| | | | | | | | This fixes two build problems introduced with the recently added new kernel module package. Fixes: ed2839ac4190 ("kernel/modules: add kmod-pmbus-zl6100 module") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel/modules: add kmod-pmbus-zl6100 modulePawel Dembicki2019-01-131-0/+30
| | | | | | | | | | | | This patch adds the kmod packaging for the Intersil / Zilker Labs ZL6100 and compatible digital DC-DC controllers as well as the core kernel module for the Power Management Bus. Add: kmod-pmbus-core kmod-pmbus-zl6100 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* cryptodev-linux: Update to 1.10Daniel Engberg2019-01-121-6/+5
| | | | | | | Update cryptodev-linux to 1.10 Switch from git to codeload generated tarball Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* mt76: fix typo in version numberFelix Fietkau2019-01-111-2/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2019-01-111-3/+3
| | | | | | | | | | | | | | | | | | | | | 58988a3 mt76: fix signedness of rx status signal field bce700d mt7603: fix signal strength reporting on single-stream devices 148219d mt7603: fix checkpatch issues 2a092e2 mt7603: fix per-rate retry accounting 962152b mt7603: fix WMM TXOP limit configuration 24ec040 mt7603: fix BSSID configuration in AP mode 48fb011 mt7603: fix CF-End transmit rate when 11b stations are connected 9daa5ff mt76: make const array 'data' static, shrinks object size 7d4a95c mt76: dma: avoid indirect call in mt76_dma_tx_queue_skb f84b008 mt76: fix tx status reporting for non-probing frames 8167074 Revert "mt7603: update firmware to 20161027164355" 2ad54b2 mt76: move wcid rssi ewma init to mt76 core d77c861 mt76: fix rssi ewma tracking eca96cd mt76: use proper name for __MT76x02_H macro d1bc504 mt76: fix building without CONFIG_LEDS_CLASS a946b78 mt76: add led support to mt76x0e driver Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: brcmfmac: backport fixes from the 5.0-rc1Rafał Miłecki2019-01-083-0/+229
| | | | | | | | | This fixes: 1) Getting STA info with newer firmwares 2) Getting DMI / UEFI / OF data 3) Possible memory corruption in firmware loading code Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: brcmfmac: trivial patches rename to use v5.0Rafał Miłecki2019-01-0810-0/+0
| | | | | | This matches Linus releasing 5.0-rc1 in place of 4.21-rc1. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: brcmfmac: fix use-after-free & possible NULL pointer dereferenceRafał Miłecki2019-01-071-3/+2
| | | | | | | | | | 1) Using fwctx variable after brcmf_fw_request_done() was executed meant accessing freed memory. 2) Using fwctx->completion for the wait_for_completion_timeout() call could reuslt in NULL pointer dereference on fw loading error or if brcmf_fw_request_done() was executed quickly enough. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: add ABI_VERSION to fix rebuild of dependent packages after upgradesFelix Fietkau2019-01-061-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: 4.19: kmod-ptp-gianfar follow upstream changesPawel Dembicki2019-01-051-1/+17
| | | | | | | | | | This patch deprecates the kmod-ptp-gianfar package and introduces kmod-ptp-qoriq for 4.19+ in its place. This has become necessary due to the linux kernel commit ceefc71d4c05 ("ptp: rework gianfar_ptp as QorIQ common PTP driver") Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
* kernel: Fix kmod-w1 dependency on hwmon-core for 4.19Petr Štetiar2019-01-031-1/+1
| | | | | | kmod-w1 depends on kmod-hwmon-core since Linux 4.14 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: Fix rtc-ds1307 dependency on hwmon-core for 4.19Petr Štetiar2019-01-031-1/+1
| | | | | | | | | | | | | | | | | | | | It seems, that since Linux 4.18-rc1 rtc-ds1307 depends on hwmon-core. commit 6b583a64fd1e019fd01626b46892ebf2361951c5 Author: Heiner Kallweit <hkallweit1@gmail.com> Date: Wed Sep 27 22:41:26 2017 +0200 rtc: ds1307: simplify hwmon config We don't have to define an extra config symbol, IS_REACHABLE does what we need. And having this config symbol just to save the few bytes of hwmon support on non-DS3231 chips isn't worth it IMO (especially as the symbol is set per default). While at it, use the same dependency check for `kmod-regmap` as well, so it's future proof as well. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mt76: update to the latest versionFelix Fietkau2018-12-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 417ab77 mt7603: improve recovery from PSE reset failure fea7ad8 mt76: move mt76x02_phy_get_min_avg_rssi to mt76 core 9d009be mt7603: add dynamic sensitivity tuning based on false CCA events 2c8e9ac mt7603: initialize channel maximum power from eeprom data b2cc29b mt76: move mt76x02_get_txpower to mt76 core 6203d46 mt7603: add support for setting transmit power 294e095 mt7603: reset DMA scheduler on MT7628 8178f0d mt7603: apply efuse data only when it exists e67e551 mt76: dma: remove napi from mt76_dma_rx_fill signature 0490bd2 mt76: usb: do not build the skb if reported len does not fit in buf_size eb076ae mt76: Add missing include of linux/module.h 1d2819e mt76: fix typo in mt76x02_check_mac_err routine 9c9fae3 mt76: mac: run mt76x02_mac_work routine atomically 6be90b6 mt76: usb: avoid queue/status spinlocks while passing tx status to mac80211 40dad32 mt76x0: pci: fix ACS support d94e9c4 mt76x02: do not set protection on set_rts_threshold callback 0d83d73 mt76x02: fixup MT_PROT_RATE_* defines 628f8d7 mt76x02: set protection according to ht operation element f7d8c17 mt76x0: configure MT_VHT_HT_FBK_CFG1 10f57cf mt76x2: add static qualifier to mt76x2_init_hardware 37b2ad3 mt76: dfs: run mt76x02_dfs_set_domain atomically 51b6daf mt76x2: init: set default value for MT_TX_LINK_CFG 9661da4 mt76: add energy detect CCA support to mt76x{0,2}e drivers 876d0e9 mt76: mac: minor optimizations in mt76x02_mac_tx_rate_val c78e317 mt76: dma: do not build skb if reported len does not fit in buf_size 3598046 mt76: mmio: introduce mt76x02_check_tx_hang watchdog Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: modules: usb: Add DWC3 Qualcomm kmodRobert Marko2018-12-271-1/+21
| | | | | | | | | Since kernel 4.18 support for Qualcomm glue layer was moved from DWC3 OF Simple to a separate DWC3 QCOM module. So lets add it and make it depend on 4.19 kernel and make sure that DWC3 OF Simple is not included if 4.19 is used. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ath10k-ct: Update to 2018-12-20Robert Marko2018-12-244-21/+21
| | | | | | | | | | | This version removes a lot of unusefull warnings that would quickly overflow the dmesg. Warnings like this: ath10k_ahb a800000.wifi: Invalid legacy rate 26 peer stats ath10k_ahb a000000.wifi: Invalid VHT mcs 15 peer stats On this version I only had 2 warnings at all. Tested on 8devices Jalapeno. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ath9k: Avoid OF no-eeprom quirks when no qca,no-eepromDaniel F. Dickinson2018-12-221-0/+73
| | | | | | | | | | | | | | | | | | Based on the process of discovery in https://github.com/openwrt/openwrt/pull/1613, it has become clear that (at least) the PowerCloud System CR5000 was unable to get working 5GHz wireless (PCIe) because AH_USE_EEPROM was unconditionally masked out, not only when qca,noeeprom was in the DTS. This patch moves mask AH_USE_EEPROM into the if ... qca,noeeprom OF test. Thanks to Christian Lampartar (@chunkeey) for the heavy lifting and help. Patch has been prepared for upstream and will be submitted after review by @chunkeey and @xdarklight. Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
* mac80211: backport upstream fixesKoen Vandeputte2018-12-202-0/+89
| | | | | | | d350a0f43118 nl80211: fix memory leak if validate_pae_over_nl80211() fails a50e5fb8db83 mac80211: fix a kernel panic when TXing after TXQ teardown Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mwlwifi: update to version 10.3.8.0-20181210Jo-Philipp Wich2018-12-201-3/+3
| | | | | | | | | | | | 67ce93e Fix compile error on kernel 4.15+ c1345bb Change driver version to 10.3.8.0-20181210. 9cb815b Upgrade 88W8997 firmware to 8.4.4.6. 433fc6d Fix non-backport use of nla_parse before 4.12.0 3b36e21 Use wiphy_to_ieee80211_hw() instead of wiphy_priv() 97ebcfa Change driver version to 10.3.8.0-20181120. f000953 Upgrade 88W8997 firmware to 8.4.4.4. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: Fix usb-chipidea dependency on ulpi.ko for 4.19Petr Štetiar2018-12-181-1/+2
| | | | | | | | | | | | | | | | | | | It seems, that since Linux 4.18-rc2 ci_hdrc depends on ulpi. commit a930d8bd94d8db7715d1af74299f710b1fb22fc8 Author: Fabio Estevam <fabio.estevam@nxp.com> Date: Wed Jul 4 10:09:58 2018 -0300 usb: chipidea: Always build ULPI code Commit 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51") causes a kernel hang on imx51 systems that use the ULPI interface and do not select the CONFIG_USB_CHIPIDEA_ULPI option. In order to avoid such potential misuse, let's always build the chipidea ULPI code into the final ci_hdrc object. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel/modules: HMC5843 3D-compass kernel module support enabled.Roman Bazalevsky2018-12-161-0/+17
| | | | Signed-off-by: Roman Bazalevsky <rvb@rvb.name>
* netfilter: Add fib support for nftablesBrett Mastbergen2018-12-161-0/+12
| | | | Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
* mt76: fix dependenciesDeng Qingfang2018-12-161-1/+1
| | | | | | Only MT76x0U needs kmod-mt76x02-usb Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* rtl8812au: Add out-of-tree driver.Ben Greear2018-12-162-0/+68
| | | | | | | | | Use a forked version of the rtl8812au driver that works better with OpenWRT (fix compile bugs, fix phy MAC address, etc) Signed-off-by: Ben Greear <greearb@candelatech.com> [update to 2018-11-16, replace rtw_byteorder.h, rename folder] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-ct: Update to 2018-12-11 and use version based on 4.19Hauke Mehrtens2018-12-155-24/+583
| | | | | | | | | | This updates the ath10k-ct driver to the version from 2018-12-11 and selects the ath10k-ct version based on kernel 4.19 by default. CONFIG_ATH10K_CE was introduced between kernel 4.16 and 4.19 and is a mandatory option. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: netfilter: chain filters merged into nf_tables.koHauke Mehrtens2018-12-151-1/+1
| | | | | | | | | | | | | | | | | | In mainline kernel commit 02c7b25e5f5 ("netfilter: nf_tables: build-in filter chain type") all chain filters were merged into one file and into one kernel module to save some memory. The code protected by these configuration options CONFIG_NF_TABLES_BRIDGE, CONFIG_NF_TABLES_IPV4, CONFIG_NF_TABLES_ARP, CONFIG_NF_TABLES_IPV6, CONFIG_NF_TABLES_NETDEV and CONFIG_NF_TABLES_INET was merged into the nft_chain_filter.c file which is now always compiled into the nf_tables.ko file. This only happened in kernel 4.19 and OpenWrt has to select these as modules in older kennel versions. Mark them as build-in in the kernel 4.19 specific kernel configuration file which will then not be overwritten by the package specific settings which try to make them modular again. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: tg3: Do not depend on kmod-hwmon-core on kernel 4.19Hauke Mehrtens2018-12-151-1/+1
| | | | | | Like on kernel 4.14 this dependency is deactivated in OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Add missing dependency to kmod-regmapHauke Mehrtens2018-12-151-2/+2
| | | | | | Like on kernel 4.14 some kernel modules depend now on regmap. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Make video-gspca-core depend on vidobuf2Hauke Mehrtens2018-12-151-1/+1
| | | | | | This new dependency is needed for kernel 4.19. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Always activate CONFIG_HW_RANDOM_TPMHauke Mehrtens2018-12-151-1/+1
| | | | | | | CONFIG_HW_RANDOM_TPM does not activate a separate kernel module any more, but it only activates the random code in the tpm.ko. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Make kmod-mpls depend on iptunnel in kernel 4.19Hauke Mehrtens2018-12-151-1/+1
| | | | | | This new dependency is needed with kernel 4.19. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Adapt to move of autofs4 in kernel 4.19Hauke Mehrtens2018-12-151-2/+6
| | | | | | autofs4 is now in the fs/autofs/ folder in kernel 4.19 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Adapt to new location of video-videobuf2 in kernel 4.19Hauke Mehrtens2018-12-151-5/+9
| | | | | | | | The video-videobuf2 kernel modules were moved to a new folder in kernel 4.19. videobuf2-v4l2.ko is only available since kernel 4.4, blacklist this kmod completely on kernel 3.18. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Add dependencies for kernel 4.19Hauke Mehrtens2018-12-153-3/+3
| | | | | | These dependencies are needed on kernel 4.14 and kernel 4.19. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Use crypto_simd.ko instead of lrw.ko for x86Hauke Mehrtens2018-12-151-2/+3
| | | | | | | | The x86 optimized cryptographic algorithm kernel modules now mostly use crypto_simd.ko instead of lrw.ko in kernel 4.19. Add the new module to the kmod-crypto-misc package. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Remove crypto/ablk_helper.ko on kernel 4.19Hauke Mehrtens2018-12-151-4/+4
| | | | | | | This module was removed in kernel 4.17, all users are refactored to not need this any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: extract asn1_decoder.koHauke Mehrtens2018-12-153-3/+13
| | | | | | | The asn1_decoder.ko module is needed by the kmod-nf-nathelper-extra package in kernel 4.19, extract it and add the missing dependencies. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add missing dependency to kmod-crypto-acompressHauke Mehrtens2018-12-152-3/+3
| | | | | | | Like kernel on 4.14 some modules need the dependency to kmod-crypto-acompress on kernel 4.19. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Adapt to moved kvaser_usb.ko in kernel 4.19Hauke Mehrtens2018-12-151-1/+3
| | | | | | In kernel 4.19 the kvaser_usb.ko file moved into its own directory. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Use kmod-dax on kernel 4.19Hauke Mehrtens2018-12-151-2/+2
| | | | | | Like on kernel 4.14 kmod-dax is needed by kmod-dm also in kernel 4.19. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* i2c-gpio-custom: Adapt to moved include fileHauke Mehrtens2018-12-151-0/+5
| | | | | | The i2c-gpio.h file was moved in kernel 4.18. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Deactivate *-gpio-custom drivers for 4.19Hauke Mehrtens2018-12-153-3/+3
| | | | | | | Kernel interface changed with kernel 4.19, it does not accept raw GPIO numbers any more. Deactivate these drivers on kernel 4.19 for now. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Add kmod-phy-realtekHauke Mehrtens2018-12-151-1/+17
| | | | | | | | The r8169 driver uses the phy lib with the realtek phy driver in kernel 4.19 instead of integrating the phy driver into the mac driver. Add the new phy driver and add this missing dependency. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Replace ledtrig-netdev with upstream backportHauke Mehrtens2018-12-151-1/+1
| | | | | | | | | | | The ledtrig-netdev was added to upstream Linux kernel 4.16, replace our own version with the patch based on the upstream version. This will remove the ledtrig-netdev support from kernel 3.18, because I not want to spend time on backporting it to 3.18. This will make it easier to use the upstream version with kernel 4.19, by just not applying this patch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 4.19.7-1Hauke Mehrtens2018-12-1322-236/+52
| | | | | | | | | | | This updates the backports package used in mac80211 to version 4.19.7-1 which is based on kernel 4.19.7. This integrates all the stable fixes introduces in this kernel version. The deleted patches are not needed any more because they are either included in the upstream Linux kernel 4.19.7 or in backports 4.19.7-1. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kmod-dma-buf: fix build with external kernelStijn Tintel2018-12-121-1/+5
| | | | | | | | | | In hack/904-debloat_dma_buf.patch, DMA_SHARED_BUFFER is changed from bool to tristate. As this patch is not applied to external kernel sources, build fails if kmod-dma-buf is enabled. Fix this by only including the module file if CONFIG_EXTERNAL_KERNEL_TREE and CONFIG_KERNEL_GIT_CLONE_URI are not enabled. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>