| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
| |
8a78567 mt76: fix compilation warning in mt76_eeprom_override()
Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The mt76 driver does load the firmware for the MT7615 chip from
/lib/firmware/mediatek instead of /lib/firmware. The driver loads the
firmware from this path since mt76 commit
ea3ab68c7589 ("mt76: mt7615: fix mt7615 firmware path definitions").
Fixes: a2e2c40b5ebd ("mt76: update to the latest openwrt-19.07 version")
Reported-by: Stijn Segers <foss@volatilesystems.org>
Signed-off-by: David Bauer <mail@david-bauer.net>
Tested-by: Stijn Segers <foss@volatilesystems.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
330e832 mt76: mt76x0: fix default mac address overwrite
f97c33e mt76: mt7603: fix input validation issues for powersave-filtered frames
875f6d7 mt76: mt7615: increase MCU command timeout
abd7d86 mt76: clear skb pointers from rx aggregation reorder buffer during cleanup
96c7b07 mt76: eeprom: add support for big endian eeprom partition
19c8e20 mt76: fix possible undetected invalid MAC address
df64c56 mt76: Off by one in mt76_calc_rx_airtime()
1702b24 mt76: mt7603: reset STA_CCA counter setting the channel
383a631 mt76: mt76x0u: do not reset radio on resume
2dcfbdd mt76: disable bh in mt76_dma_rx_poll
947d20d mt76: fix rx dma ring descriptor state on reset
f3348f5 mt7615: replace sta_state callback with sta_add/sta_remove
faf5e6f mt76: mt7615: read {tx,rx} mask from eeprom
db78ee0 mt76: move mt76_get_antenna in mt76_core module
7121e16 mt76: fix possible out-of-bound access in mt7615_fill_txs/mt7603_fill_txs
5dfb0ec mt76: mt7615: disable radar pattern detector during scanning
e2f90ad mt76: move interface_modes definition in mt76_core module
cfdb751 mt76: mt7615: add ibss support
e0731a8 mt76: move SUPPORTS_REORDERING_BUFFER hw property in mt76_register_device
a85c06c mt76: use mt76_dev in mt76_is_{mmio,usb}
ea19cd7 mt76: Remove set but not used variable 'idx'
3cbaf81 mt76: mt76u: rely on a dedicated stats workqueue
20f0589 mt76: mt76u: rely on usb_interface instead of usb_dev
f2be00b mt76: dma: fix buffer unmap with non-linear skbs
c14d656 mt76: mt76x2e: disable pcie_aspm by default
58e1e96 mt76: mt7615: remove unneeded semicolon
c93a2d1 mt76: mt76x02u: update ewma pkt len in mt76x02u_tx_prepare_skb
1987b74 mt76: mt76x0: remove 350ms delay in mt76x0_phy_calibrate
50b1e9b mt76: refactor cc_lock locking scheme
d868638 mt76: remove obsolete .add_buf() from struct mt76_queue_ops
dc14ac6 mt7615: remove vif sta from poll list on interface remove
2a0a191 mt7603: remove vif sta from poll list on interface remove
d3a5895 mt76: fix a-mpdu boundary detection issue for airtime reporting
391e148 mt76: add sanity check for a-mpdu rx wcid index
01642d8 mt76: mt76x02: fix use-after-free in tx status code handling airtime
c11a4ad mt76: mt76x0: eeprom: add support for MAC address from OF
d94cc81 mt76: drop rcu read lock in mt76_rx_aggr_stop
7d8764d mt76: avoid enabling interrupt if NAPI poll is still pending
5b02a07 mt76: add missing locking around ampdu action
71c2ef0 mt76: fix aggregation stop issue
6f7d0f5 mt76: fix use-after-free bug in airtime fairness code
8f22de0 mt76: do not use devm API for led classdev
e7199f9 mt76: enable airtime fairness
81f2be0 mt76: mt7615: track tx/rx airtime for airtime fairness
2579122 mt76: mt7615: introduce mt7615_mac_wtbl_update routine
d91f7c1 mt76: mt7615: fix survey channel busy time
028071d mt76: mt7615: report tx_time, bss_rx and busy time to mac80211
0e5050e mt76: mt76x02: track approximate tx airtime for airtime fairness and survey
3429cc7 mt76: mt76x02: move MT_CH_TIME_CFG init to mt76x02_mac_cc_reset
de118bb mt76: unify channel survey update code
fdf0163 mt76: mt7603: switch to a different counter for survey busy time
ee31030 mt76: mt7603: track tx airtime for airtime fairness and survey
f34b1ae mt76: track rx airtime for airtime fairness and survey
a1d6891 mt76: store current channel survey_state in struct mt76_dev
b042987 mt76: rename mt76_driver_ops txwi_flags to drv_flags and include tx aligned4
2027763 mt76: report rx a-mpdu subframe status
1ddcadb mt76: mt7603: remove q_rx field from struct mt7603_dev
ea3ab68 mt76: mt7615: fix mt7615 firmware path definitions
081926a mt76: mt7603: collect aggregation stats
696c0fc mt76: mt7615: collect aggregation stats
23e8aed mt76: move aggr_stats array in mt76_dev
1118b5e mt76: mt7615: add queue entry in debugfs
fbc59e6 mt76: move queue debugfs entry to driver specific code
0b01ace mt76: mt76x02u: move mt76x02u_mac_start in mt76x02-usb module
c394887 mt76: mt76x0u: reset counter starting the device
0355b7a mt76: mt76x2: move mt76x02_mac_reset_counters in mt76x02_mac_start
f3792b5 mt76: mt76x02: move mac_reset_counter in mt76x02_lib module
63e8152 mt76: mt7615: enable SCS by default
b140512 mt76: mt76x0e: make array mt76x0_chan_map static const, makes object smaller
a20c20b mt76: usb: add lockdep_assert_held in __mt76u_vendor_request
0308d75 mt76: remove empty flag in mt76_txq_schedule_list
0efbc5d mt76: use cancel_delayed_work_sync in mt76_rx_aggr_shutdown
9c5df3c mt76: remove aggr_work field from struct mt76_wcid
8739f87 mt76: mt7615: fix control frame rx in monitor mode
e07407a mt7603: fix build with CONFIG_KERNEL_DYNAMIC_DEBUG=y
c7f8214 mt76: mt7615: add support to read temperature from mcu
6797378 mt76: mt7615: introduce mt7615_txwi_to_txp utility routine
496c78e mt76: mt76x0: remove unneeded return value on set channel
1d2acd5 mt76: mt76x0: remove redundant chandef copy
0167bfa mt76: make mt76_rx_convert static
Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
|
|
|
|
|
|
|
|
| |
This adds a (currently missing) throughput LED trigger for the rt2x00
driver. Previously, LED triggers had to be assigned to the netdev, which
was limited to a single VAP.
Signed-off-by: David Bauer <mail@david-bauer.net>
Tested-by: Christoph Krapp <achterin@googlemail.com>
(cherry picked from commit 985ec835aea100e9245baaef8ebb15628601fe5e)
|
|
|
|
|
| |
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry-picked from commit fa37dbbc43db23a0ce7256f47943f38a1dcc9027)
|
|
|
|
|
| |
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry-picked from commit 6a3739dc42c1d9626e5784d9316c56962bd8f016)
|
|
|
|
|
|
|
| |
Required for newer versions of mt76
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry-picked from commit d64daf7026ce47788f12130462a3107bdab8718f)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
According to many bugreports [0][1][2] the default ath10k-ct kernel
module is unusable on devices with just 64 MiB RAM or with 128 MiB and
dual ath10k cards. The target boards boot but eventually oom-killer
starts to interfere with normal operation, so the current state is
effectively broken.
Since the two patches in question have a performance impact (and
possibly some other unexpected side-effects) a dedicated build variant
is added so that users of the low RAM devices can still benefit from all
the ath10k-ct advantages.
According to testing [3] results, the issue can be experienced even with
"a 256MB device with three radios". Measured performance impact of
implementing small buffers was lowering "the maximum 5 GHz throughput on
an IPQ40xx device without RPS/XPS optimizations from 494/432 Mbit/s for
TCP transfers (download/upload) to 438/343 Mbit/s"
The patches were apparently inspired by QSDK tweaks used by ODMs for the
affected devices.
[0] http://lists.infradead.org/pipermail/openwrt-devel/2019-December/020573.html
[1] https://github.com/openwrt/openwrt/pull/1077
[2] https://bugs.openwrt.org/index.php?do=details&task_id=2664
[3] https://github.com/freifunk-gluon/gluon/pull/1440#issue-195607701
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
[Remove double CONFIG_ATH10K-CT_LEDS entry]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 1ac627024de916eb157659caf49f93fa89d3b19a)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch resolves recursive dependency warning on a feed package:
$ make defconfig
Collecting package info: done
tmp/.config-package.in:104721:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:104721:symbol PACKAGE_nfs-kernel-server depends on NFS_KERNEL_SERVER_V4
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
feeds/packages/net/nfs-kernel-server/Config.in:4:symbol NFS_KERNEL_SERVER_V4 depends on PACKAGE_nfs-kernel-server
#
# configuration written to .config
#
19.07 branch uses kernel 4.14 only, so CONFIG_LINUX_4_9 symbol is not
needed anyway.
Ref: https://github.com/openwrt/packages/issues/10490
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Unloading and reloading the modules fails, as platform_device_put() does not
release resources fully.
root@OpenWrt:/# insmod i2c-gpio-custom bus0=0,18,0,5
[ 196.860620] Custom GPIO-based I2C driver version 0.1.1
[ 196.871162] ------------[ cut here ]------------
[ 196.880517] WARNING: CPU: 0 PID: 1365 at fs/sysfs/dir.c:31 0x80112158
[ 196.893431] sysfs: cannot create duplicate filename '/devices/platform/i2c-gpio.0'
...
[ 197.513200] kobject_add_internal failed for i2c-gpio.0 with -EEXIST, don't try to register things with the same name in the same directory.
This patch fixes it by replacing platform_device_put() to
platform_device_unregister().
Fixes: da7740853715 ("i2c-gpio-custom: minor bugfix")
Fixes: 3bc81edc70e8 ("package: fix w1-gpio-custom package (closes #6770)")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
(cherry picked from commit a22b7a60d98836343c4f7b9ec0fcae68d9131522)
|
|
|
|
|
| |
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 17e2246eca901fec79fbac5b7a90f68f60785c4e)
|
|
|
|
|
|
|
|
|
|
| |
This update doesn't include:
3b1e0a7bdfee brcmfmac: add support for SAE authentication offload
be898fed355e brcmfmac: send port authorized event for FT-802.1X
due to nl80211 dependencies.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit c3aa33bf705027751b344bc668541e5d08ed9495)
|
|
|
|
|
|
|
|
|
|
| |
This also fixes mac80211_prepare_vif iw set channel in monitor or
mesh mode.
Signed-off-by: Santiago Piccinini <spiccinini@altermundi.net>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[daniel@makrotopia.org: fixed commit message]
(cherry picked from commit c7fb12beb1d347f1cedc7890dbe2d441f70ccf62)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit b3d8b3a introduced a new test:
[ -n "$noscan" -a "$noscan" -gt 0 ] && hostapd_noscan=1
But if length of "$noscan" is zero (noscan is not set) this doesn't stop
the shell to evaluate the rest of the test.
root@hank2:~# [ -n "$noscan" -a "$noscan" -gt 0 ]
ash: out of range
root@hank2:~#
So when radios are brought up this shows in the log:
Sat Nov 23 10:51:38 2019 daemon.info procd: - init complete -
Sat Nov 23 10:52:24 2019 daemon.notice netifd: radio1 (1243): sh: out of range
Sat Nov 23 10:52:25 2019 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2)
Sat Nov 23 10:52:25 2019 daemon.notice netifd: radio0 (1242): sh: out of range
Sat Nov 23 10:52:26 2019 authpriv.info dropbear[1536]: Not backgrounding
This commit sets noscan to 0 if unset and removes the gratuitous length
check, preventing the warning.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
(cherry picked from commit 28d84331f4bba5923059e701f5d4878b2df3fa79)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
|
|
|
|
| |
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
|
|
|
|
|
|
|
| |
This potentially fixes some issues seen on IBSS
when interfaces go out of range and then re-appear.
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
|
|
|
|
|
|
|
|
|
|
|
| |
The skb_get_hash_perturb() function now takes a siphash_key_t instead of
an u32. This was changed in commit 55667441c84f ("net/flow_dissector:
switch to siphash"). Use the correct type in the fq header file
depending on the kernel version.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
(cherry picked from commit eaa047179ad30d156d0c3da7ec225acfae7a9f00)
|
|
|
|
|
| |
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit cde8c2f2fba019c4cd3b9f6ad463ff86cc783061)
|
|
|
|
|
|
|
|
| |
AutoLoad parameter must match the exact kernel module name. Fix it.
Fixes: 125f1ce9ad0c ("kernel: video: add DRM core and IMX DRM support for HDMI/LVDS")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
(cherry picked from commit 6990510aca41074351f92a5abc6f4afb4b606506)
|
|
|
|
|
|
|
|
|
|
|
| |
Instead of depending on kmod-usb2 make it depend on the normal USB
dependencies. This should hopefully fix some problems seen in the build
bot builds for powerpc_8540.
In addition also activate DRIVER_11N_SUPPORT support.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 3ff3b044c01949cd7280978b17d0348ee9e7f4ae)
|
|
|
|
|
|
|
|
|
|
|
|
| |
The QCA953x only supports 25 MHz refclk, however some OEMs set an
invalid bootstrap value for the REF_CLK option, which would break the
clock detection in ath9k.
Force the QCA953x refclk to 25MHz in ath9k, as this is (according to the
datasheet) the only valid frequency.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 4c6fe32468bc60cc25a8c298498c0be3c73e7378)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Import patches from upstream to sync 19.07 with master:
9f3e3323e996 rt2x00: allow to specify watchdog interval
2034afe4db4a rt2800: add helpers for reading dma done index
759c5b599cf4 rt2800: initial watchdog implementation
09db3b000619 rt2800: add pre_reset_hw callback
710e6cc1595e rt2800: do not nullify initialization vector data
e403fa31ed71 rt2x00: add restart hw
0f47aeeada2a rt2800: do not enable watchdog by default
41a531ffa4c5 rt2x00usb: fix rx queue hang
3b902fa811cf rt2x00usb: remove unnecessary rx flag checks
1dc244064c47 rt2x00: no need to check return value of debugfs_create functions
706f0182b1ad rt2800usb: Add new rt2800usb device PLANEX GW-USMicroN
95844124385e rt2x00: clear IV's on start to fix AP mode regression
567a9b766b47 rt2x00: do not set IEEE80211_TX_STAT_AMPDU_NO_BACK on tx status
14d5e14c8a6c rt2x00: clear up IV's on key removal
13fa451568ab Revert "rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band"
--pending-- rt2800: remove errornous duplicate condition
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
|
|
|
|
|
|
|
|
|
| |
The kconfig symbol is an invisible one since its introduction. It is
not supposed to be enabled on its own.
Resolves FS#1821
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry picked from commit 4bf9bec361699e1c033460964158531adf15d7ee)
|
|
|
|
|
|
|
|
| |
Improves rate control responsiveness and performance
Signed-off-by: Felix Fietkau <nbd@nbd.name>
[reworked to apply on 4.19.79 mac80211 + renumbered + refreshed]
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
|
|
|
|
|
|
|
|
| |
Fixes: 4b3d17b709a5 ("kernel: add kmod-fb-sys-ram")
Fixes: b774acb47912 ("package/modules: add missing gspca video drivers for 2.6.32 (patch from #6595)")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
(cherry picked from commit 9f73fad359663fef4decc7440796ec7d3b2b70f7)
|
|
|
|
|
|
|
|
|
|
|
|
| |
Upon writing to "remove" file, debugfs_remove_recursive() blocks while
holding rtnl_lock. This is because debugfs' file_ops callbacks are
executed in debugfs_use_file_*() context which prevents file removal.
Fix this by only flagging the device for removal and then do the cleanup
in file_ops.release callback which is executed out of that context.
Signed-off-by: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>
(cherry picked from commit c2635b871d1dd03a6608a9255222672decd49e09)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since v3.11, netdevice notification data are of type
"struct netdev_notifier_info". Handle it as such!
This should fix a critical bug in which devices are unable get released
because trelay does not release resources in response to UNREGISTER
event spamming the log with something like:
unregister_netdevice: waiting for eth0.1 to become free. Usage count = 1
Signed-off-by: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>
(cherry picked from commit 77cfc0739d30c1282f7de24d2ec086d244e34bb7)
|
|
|
|
| |
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
|
|
|
|
|
|
|
|
| |
The destination buffer size `d_len` is passed to `lzma_inflate` as a
pointer. Therefore, it needs to be dereferenced to compare its content.
Signed-off-by: Christian Franke <nobody@nowhere.ws>
(cherry picked from commit d544bc84a07f299ac1e513715301cae5fbd30923)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
|
|
|
|
|
|
|
|
|
| |
5e8cd86f90da ath10k-ct: Backport ap-vlan code from 5.2 to 4.20 and 4.19 drivers.
0c518586bd7f ath10k-ct: Fix a few warning splats.
Adds AP VLAN.
Refreshed all patches.
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
|
|
|
|
|
| |
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 4fc0a61ed3da96330d30703a2a039a6a06dc0b2f)
|
|
|
|
|
|
|
|
|
|
| |
add module to support Emulex OneConnect
common in 10Gbit SFP+ cards by Dell/HP/IBM
supports OneConnect OCe10xxx OCe11xxx OCe14xxx,
LightPulse LPe12xxx
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
(cherry picked from commit 827f47749b75dcc6b650297b9303c27127b15201)
|
|
|
|
|
|
|
|
| |
This makes brcmfmac use the same wiphy after PCIe reset to help user
space handle corner cases (e.g. firmware crash).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit f39f4b2f6d4300995270f635261b07197e8cf61e)
|
|
|
|
|
|
|
|
| |
Patch getting RAM info got upstreamed. A debugging fs entry for testing
reset feature was added.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 681acdcc54d2e59135bb706c38bed942f74ccf74)
|
|
|
|
|
| |
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry picked from commit f0f5cb26cb7ced03c70063d08c90d211f80b7a31)
|
|
|
|
|
|
|
| |
This is used by PISEN WMB001N.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
(cherry picked from commit 11182349e1f31f873ebddd69d6b87dec638eaabf)
|
|
|
|
|
|
|
|
|
|
|
|
| |
This changes the default PKG_BUILD_DIR to take BUILD_VARIANT into
account (if set), so that packages do not need to manually override
PKG_BUILD_DIR just to handle variants.
This also updates most base packages with variants to use the updated
default PKG_BUILD_DIR.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
(cherry picked from commit e545fac8d968864a965edb9e50c6f90940b0a6c9)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
After commit e82a4d9cfb ("config: regenerate *_shipped sources") the mconf
parser became more strict as a side effect and started to spew a series of
warnings when evaluating our generated kconfig sources:
tmp/.config-package.in:705:warning: ignoring unsupported character '@'
The root cause of these warnings is a wrong use of the @SYMBOL dependency
syntax in various Makefile. Fix the corresponding Makefiles by turning
`@SYM||@SYM2` expressions into the proper `@(SYM||SYM2)` form.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 74739c4228f3bd0aa757165c67c53016c3deb544)
|
|
|
|
|
|
|
|
|
|
| |
By default, set BE tx queue TXOP limit to 2.0 in the hostapd config
Many vendor drivers are doing similar things to boost throughput.
On MT7612 under ideal conditions, it improves tx throughput from 470 Mbit/s
to about 570 Mbit/s.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry-picked from commit 8650201f10afe83387fd6cde00b08172172eeba3)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Close cooperation with Lorenzo Bianconi resulted
in these patches which fix all remaining seen issues
when using dynack.
Fix link losses when:
- Late Ack's are not seen or not present
- switching from too low static coverage class to dynack on a live link
These are fixed by setting the Ack Timeout/Slottime to
the max possible value for the currently used channel width when
a new station has been discovered.
When traffic flows, dynack is able to adjust to optimal values
within a few packets received (typically < 1 second)
These changes have been thoroughly tested on ~60 offshore devices
all interconnected using mesh over IBSS and dynack enabled on all.
Distances between devices varied from <100m up to ~35km
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
(cherry picked from commit f6e8ba0238fe349b7529357793e2fb18635819ed)
|
|
|
|
|
|
|
|
|
|
|
|
| |
Changes:
9e5ab25027e0 ath10k-ct: Update to latest 5.2 upstream, support bigger mtu, 160Mhz
Removed upstreamed patches:
- 204-ath10k-fix-max-antenna-gain-unit.patch
- 205-ath10k-adjust-tx-power-reduction-for-US-regulatory-d.patch
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the ath10k-ct package ships multiple versions of the ath10k-ct driver,
OpenWrt currently only uses the version 4.19, but we still ship some
patches for older versions. Remove all patches only touching older
versions and also remove the patch for older versions from patches which
do the same changes to multiple versions of ath10k-ct.
This removes some unneeded patches, the end binary should stay the same.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 10fe5ca3629c4739763df0274610b43eebd1ee3a)
|
|
|
|
|
| |
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 8f61b4cac412fd3dbda08b0b1aac34a29e6ed290)
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Changes:
ath10k: Improve PMF/MPF mgt frame check
And add a driver for 5.2 (beta, not even tested yet) kernel.
Refresh patches.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(cherry picked from commit 49b3dcb2ab8a5023a210a50de8157b650ab60c81)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
b3a29655ae0b mt76x02: fix crash on device reset
ffddb685a679 mt76x02u: check chip version on probe
7fc5f925ec35 mt76x2u: remove duplicated entry in mt76x2u_device_table
61311d9b307a mt76: introduce mt76_free_device routine
a7dfcf2e2498 mt76: move mac_work in mt76_dev
334b4cedf2b0 mt76: add mac80211 driver for MT7615 PCIe-based chipsets
edb2a001b695 mt76: add unlikely() for dma_mapping_error() check
355c07904da7 mt76: use macro for sn and seq_ctrl conversion
133bffba8bb2 add firmware for MT7615E
49d9c1b29f1d mt76: usb: reduce locking in mt76u_tx_tasklet
3e371ca35c7f mt76: set txwi_size according to the driver value
50073265559a mt76: add skb pointer to mt76_tx_info
c47a5685d00b mt76: dma: introduce skb field in mt76_txwi_cache
9029560fad1f mt76: dma: add skb check for dummy pointer
e9eea3923774 mt76: mt7615: use sizeof instead of sizeof_field
98c5359e9649 Revert "mt76: fix potential deadlock on cancelling workqueues"
bc9baa7b12b9 mt76x02u: remove bogus stop on suspend
6c1cab9abafc mt76usb: fix tx/rx stop
0e674c50a5a3 mt76x02: remove bogus mutex usage
59f7bb6fbfc5 Revert "mt76: mt76x02: send no-skb tx status without holding the status lock"
b0f2a30452f0 mt76x02: avoid status_list.lock and sta->rate_ctrl_lock dependency
62054defd78a mt76: mt7603: remove query from mt7603_mcu_msg_send signature
e79d96acf597 mt76: mt7603: use standard signature for mt7603_mcu_msg_send
be8f0394e335 mt76: mt7603: initialize mt76_mcu_ops data structure
9a9c6569e987 mt76: introduce mt76_mcu_restart macro
980b91e04006 mt76: mt7603: init mcu_restart function pointer
a97db3f3ceee mt76: mt7603: run __mt76_mcu_send_msg in mt7603_mcu_send_firmware
151115f8160b mt76: mt76x02: mt76x02_poll_tx() can be static
7391f98f8b4b mt76: fix endianness sparse warnings
6c06f7381129 mt76: mt7603: report firmware version using ethtool
f06647efbd1c mt76: usb: use EP max packet aligned buffer sizes for rx
f43fccf0990e mt76: move beacon_int in mt76_dev
74ab2cf6171e mt76: move beacon_mask in mt76_dev
23c2f94deeeb mt76: add TX/RX antenna pattern capabilities
6e790e106a84 mt76: move pre_tbtt_tasklet in mt76_dev
7606c08414e5 mt76: mt7603: enable/disable pre_tbtt_tasklet in mt7603_set_channel
ff22eee58520 mt76: do not enable/disable pre_tbtt_tasklet in scan_start/scan_complete
3157385e2277 mt76: mt7603: dynamically alloc mcu req in mt7603_mcu_set_eeprom
cc674e2d1f10 mt76: mt76x02: remove useless return in mt76x02_resync_beacon_timer
6b184272ba15 mt76: move tx_napi in mt76_dev
bce63c453c85 mt76: mt7603: use napi polling for tx cleanup
4afd89e8ab20 mt76: mt7615: use napi polling for tx cleanup
2cb46830faf7 mt76: move netif_napi_del in mt76_dma_cleanup
b4ceb9f7c791 mt76: Fix a signedness bug in mt7615_add_interface()
d00dc9524068 mt76: mt7615: Use after free in mt7615_mcu_set_bcn()
4e0ccc6a2da6 mt76: mt7615: Make mt7615_irq_handler static
0fd552a55847 mt7615: mcu: simplify __mt7615_mcu_set_wtbl
50f70948ffcc mt7615: mcu: simplify __mt7615_mcu_set_sta_rec
4434d04d3c50 mt7615: mcu: remove bss_info_convert_vif_type routine
083fbb97223c mt7615: mcu: use proper msg size in mt7615_mcu_add_wtbl_bmc
f61ca8019129 mt7615: mcu: use proper msg size in mt7615_mcu_add_wtbl
35bd12d609ac mt7615: mcu: unify mt7615_mcu_add_wtbl_bmc and mt7615_mcu_del_wtbl_bmc
f8f990b9092e mt7615: mcu: remove unused parameter in mt7615_mcu_del_wtbl
965bca14795e mt7615: remove query from mt7615_mcu_msg_send signature
9b9ca18d9602 mt7615: remove dest from mt7615_mcu_msg_send signature
935b7e5edaba mt7615: mcu: remove skb_ret from mt7615_mcu_msg_send
2442db44c2ab mt7615: mcu: unify __mt7615_mcu_set_dev_info and mt7615_mcu_set_dev_info
645bc458e1ab mt7615: mcu: do not use function pointers whenever possible
40c4201c28bf mt7615: mcu: remove unused structure in mcu.h
a8834a233fa7 mt7615: mcu: use standard signature for mt7615_mcu_msg_send
824d25c44124 mt7615: initialize mt76_mcu_ops data structure
d9434275a872 mt7615: mcu: init mcu_restart function pointer
c2211e478c6e mt7615: mcu: run __mt76_mcu_send_msg in mt7615_mcu_send_firmware
cb63a06c403a mt76: mt7603: stop mac80211 queues before setting the channel
c6aaa3a2a9ea mt76: mt7615: rearrange cleanup operations in mt7615_unregister_device
97609f3708c7 mt76: mt7615: add static qualifier to mt7615_rx_poll_complete
f9dadd2d9377 mt76: mt7603: add debugfs knob to enable/disable edcca
89cda5d85498 mt7603: fix reading target tx power from eeprom
77d0e3378bd1 mt76: fix setting chan->max_power
f575da2f01a4 mt76: mt76x02: fix tx status reporting issues
a5d18dca9d3e mt76: mt76x02: fix tx reordering on rate control probing without a-mpdu
bd32a93e4996 mt76: mt76x02: remove enable from mt76x02_edcca_init signature
18386eef1d22 mt76: mt76x2u: remove mt76x02_edcca_init in mt76x2u_set_channel
da3514f6de4f mt76: mt76x2: move mutex_lock inside mt76x2_set_channel
0d4719c327ca mt76: mt76x02: run mt76x02_edcca_init atomically in mt76_edcca_set
fd5af7397257 mt76: mt76x02: fix edcca file permission
a0f51f276104 mt76: mt7615: do not process rx packets if the device is not initialized
753cdee4f6f6 mt76: mt7615: stop mcu first in mt7615_unregister_device
899efe755bae mt76: move mt76_insert_ccmp_hdr in mt76-module
6960b6e2d163 mt76: mt7615: add support for mtd eeprom parsing
4bcb0577daa5 mt76: mt7615: select wifi band according to eeprom
866f2c6cd0a2 mt76: generalize mt76_get_txpower for 4x4:4 devices
514fb04492a6 mt76: mt7615: add the capability to configure tx power
ced9d43a8a85 mt76: mt7615: init get_txpower mac80211 callback
8abd502a5f86 mt76: mt7615: rearrange locking in mt7615_config
5b9b62e0b00c mt76: move mt76_get_rate in mt76-module
661c7c8e1acc mt76: Remove set but not used variables 'pid' and 'final_mpdu'
f072c7ba2150 mt76: mt7615: enable support for mesh
28d9496205a6 mt76: mt7615: fix slow performance when enable encryption
827b9ade1672 mt76: mt7615: remove unused variable in mt7615_mcu_set_bcn
34eea1414b8b mt76: mt7615: remove key check in mt7615_mcu_set_wtbl_key
2bfae5a25251 mt76: usb: fix rx A-MSDU support
b0335320fc2c mt76: usb: do not always copy the first part of received frames
3e7fc1573c6f mt76x02: fix reporting of non-probing frames with tx status requested
0d5caead9765 Revert "mt76: usb: do not always copy the first part of received frames"
335e8c6baf77 Revert "mt76: usb: fix rx A-MSDU support"
47ddf4b722a1 mt76: revert support for TX_NEEDS_ALIGNED4_SKBS
0b6520bd1c98 mt7603: rework and fix tx status reporting
539b6796605c mt7603: improve hardware rate switching configuration
d86d6efa7214 mt76x0: fix RF frontend initialization for external PA
f476a14761ec mt76x02: fix endian issue in tx status reporting patch
f8d051785221 mt76: mt7615: simplify mt7615_mcu_set_sta_rec routine
73ff45f618fd mt76: mt7615: add support for per-chain signal strength reporting
9b67ae62d9ea mt76: mt7615: init per-channel target power
160fdc05e260 mt76: mt7615: take into account extPA when configuring tx power
2211d9370976 mt76: mt76x02u: fix sparse warnings: should it be static?
3750533a37a4 mt76: mt7615: fix incorrect settings in mesh mode
c37c1ca3fa01 mt76: mt7615: update peer's bssid when state transition occurs
9dd1089a29af mt76: mt76u: reduce rx memory footprint
0789f45e52c5 mt76: mt7615: remove cfg80211_chan_def from mt7615_set_channel signature
2dca431cd7fc mt76: move nl80211_dfs_regions in mt76_dev data structure
3386ccf7842b mt76: mt76u: get rid of {out,in}_max_packet
d680ab01cddd mt76: usb: fix rx A-MSDU support
6cafaca7225d mt7603: use READ_ONCE instead of ACCESS_ONCE
9e2e0b857710 mt76: round up length on mt76_wr_copy
e378ef1bc1e5 mt76: mt7615: fix sparse warnings: warning: restricted __le16 degrades to integer
7991dd7e25c8 mt76: mt7615: introduce mt7615_regd_notifier
901a4c7b7f8c mt76: mt7615: add hw dfs pattern detector support
57c600e5b945 mt76: mt7615: do not perform txcalibration before cac is complited
6afc9521962f mt76: mt7615: add csa support
8919516006e4 mt76: mt7615: add radar pattern test knob to debugfs
3be723cad7a9 mt76: mt7615: clean up FWDL TXQ during/after firmware upload
47fe37e22fdf mt76: mt7615: fall back to sw encryption for unsupported ciphers
bc5e0417939f mt76: mt7603: enable hardware rate up/down selection
ae760db52abc mt76: mt7615: move mt7615_mcu_set_rates to mac.c
2ae01f7e7715 mt76: mt7615: reset rate index/counters on rate table update
6f9837833baf mt76: mt7615: sync with mt7603 rate control changes
edbe88ec7c1f mt76: usb: fix endian in mt76u_copy
f43b6228facf mt76: usb: remove unneeded {put,get}_unaligned
5e1e5b75d6e8 mt76: usb: use full intermediate buffer in mt76u_copy
017d0ff097f7 mt76: mt76u: fix typo in mt76u_fill_rx_sg
2c0ccf1561c1 mt76: mt7615: always release sem in mt7615_load_patch
0c6f1a2b3c33 mt76: mt7615: introduce mt7615_mcu_send_ram_firmware routine
3dfc1eeffedf mt76: mt7615: fix sparse warnings: incorrect type in assignment (different base types)
947532099c3e mt76: mt7603: fix sparse warnings: warning: incorrect type in assignment (different base types)
e07451d27941 mt76: mt7615: fix sparse warnings: warning: cast from restricted __le16
b973bef0f87f mt7603: do not use tssi-off power value for mt7628
8fc3e6e02e96 mt76: mt7615: fix using VHT STBC rates
b21b99187a54 mt76: mt7615: fix PS buffering of action frames
3d43dd886951 mt76: mt7615: fix invalid fallback rates
0ce46825b8df mt76: mt7603: fix invalid fallback rates
3b08966d99ae Revert "mt76: usb: use full intermediate buffer in mt76u_copy"
48800e7b6088 Revert "mt76: usb: remove unneeded {put,get}_unaligned"
439354d54085 Revert "mt76: usb: fix endian in mt76u_copy"
8c1da9367beb mt76: usb: fix endian in mt76u_copy
307be50cc5f4 mt76: usb: remove unneeded {put,get}_unaligned
5d298297c00c mt76: mt76x02: use params->ssn value directly
f74d117ed41c mt76: mt7603: use params->ssn value directly
649f2e83742e mt76: mt7615: use params->ssn value directly
b647180c86be mt76: mt7615: unlock dfs bands
410923fa24de Revert accidental debugging change
3d7f7384bef0 mt76: mt7615: add missing register initialization
75656a4590a3 net: wireless: support of_get_mac_address new ERR_PTR error
fb0f432834c0 mt76: stop rx aggregation on station removal
76aada563b66 mt76: dma: reset q->rx_buf on rx reset
3245ca8b8aeb mt76: check of_get_mac_address for NULL as well to restore old kernel compat
8e495245ab3d mt76: mt7615: move mt7615_mac_get_key_info in mac.c
e4f48a8df6aa mt76: mt7615: add mt7615_mac_wtbl_addr routine
e8c95e5a41f0 mt76: mt7615: introduce mt7615_mac_wtbl_set_key routine
d998b90c4bed mt76: mt7615: remove wtbl_sec_key definition
60d279ec2762 mt76: mt7615: add set_key_cmd and mt76_wcid to mt7615_mac_wtbl_set_key signature
4947ad4eab6a mt76: introduce mt76_mmio_read_copy routine
4d9001b8ab1d mt76: mt7615: fix MT7615_WATCHDOG_TIME definition
3d6796b867b6 mt76: mt7603: fix watchdog rescheduling in mt7603_set_channel
8d7a48030005 mt76: mt7615: add 4 WMM sets support
ae0f11149248 mt76: mt7615: update cw_min/max related settings
8b7bbd017654 mt76: mt7603: fix some checkpatch warnings
e6045467848d mt76: mt7615: fix some checkpatch warnings
c415c676e255 mt76: mt76x02: fix some checkpatch warnings
f625afcedc9b mt76: switch to SPDX tag instead of verbose boilerplate text
4d57f1cee4aa mt76: mt7615: rework locking scheme for mt7615_set_channel
2becd13be766 mt76: mt7615: add Smart Carrier Sense support
20f0c196722a mt76: mt76x02: introduce mt76x02_pre_tbtt_enable and mt76x02_beacon_enable macros
ae83a05b1050 mt76: mt76x02: do not copy beacon skb in mt76x02_mac_set_beacon_enable
92fa62ace198 mt76: mt76x02u: enable multi-vif support
c6dabfe953af mt76: mt76x02u: enable survey support
1f44159b41ff mt76: mt7603: move survey_time in mt76_dev
9657e6304322 mt76: mt7615: enable survey support
af860c0decb1 mt76: move mt76_tx_tasklet in mt76 module
a9d2a28b39fc mt76: mt7603: remove unnecessary mcu queue initialization
281b10fc1fe6 mt76: mt7615: add BIP_CMAC_128 cipher support
37673a4181e4 mt76: fix some checkpatch warnings
a7fa32603981 mt76: add default implementation for mt76_sw_scan/mt76_sw_scan_complete
5c35bdf057af mt7615: apply calibration-free data from OTP
0e3baf0213c9 mt76: fix a leaked reference by adding a missing of_node_put
2d5928fef23d net: Remove dev_err() usage after platform_get_irq()
a0824197ab00 mt76: mt76x0e: disable 5GHz band for MT7630E
4d8a9f20610f mt76: do not send BAR frame on tx aggregation flush stop
2a0edbb4473b mt76: remove offchannel check in tx scheduling
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
| |
Required for an upcoming mt76 update
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry-picked from commit 0441edfb7fe0e927f51b291c2d996da68ac78dd2)
|
|
|
|
|
|
|
| |
Also include follow-up regression fix from master
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry-picked from commits 9861050b85e5 and f0992d7a309f)
|
|
|
|
| |
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
|
|
|
|
|
|
|
|
| |
This updates to backports-4.19.57-1 which contains the wireless
subsystem and driver from kernel 4.19.57.
The removed patches are applied upstream.
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
|
|
|
|
|
|
| |
This provides a complete console messages dump.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 6a7b201b6c5c82d3d8d392ae931100c1909869e0)
|