aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel
Commit message (Collapse)AuthorAgeFilesLines
* kmod-sched-cake: bump to latest bake of cake for 17.01Kevin Darbyshire-Bryant2017-12-301-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There has been recent significant activity with the cake qdisc of late but in the cobalt branch. Some of that effort is related to upstreaming to kernel & iproute2 mainline but we're not quite there yet. Relevant feature changes: ingress mode: Instead of only counting packets that make it past the shaper, include packets we've decided to drop as well, since they did arrive with us on the link and took link capacity. This mode is more suitable for shaping the ingress of a link (e.g. from ISP) rather than the more normal egress. ptm mode: Minor optimisation in packet overhead calculation. dual-src/dsthost/triple-isolate: Optimise only calculating src or dst host hashes only if required. ack-filter/ack-filter-aggressive: Filter excessive TCP ACKS. Useful in highly assymetric links (downstream v upstream capacity) where the majority of upstream link capacity is occupied with ACKS for downstream traffic. A separate iproute2 patch to teach it about Cake's new features will follow. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mac80211: don't pass the hostapd ctrl iface in adhocAntonio Quartulli2017-12-131-2/+8
| | | | | | | | Passing the ctrl iface to wpa_supplicant will automatically cause wpa_supplicant to send "STOP_AP" messages to the hostapd. This breaks the AP interfaces. Signed-off-by: Antonio Quartulli <ordex@autistici.org> (cherry picked from commit 0da54fa6428ea98d31b49f5d9a4a272214f5d188)
* kmod-sched-cake: drop maintainerKevin Darbyshire-Bryant2017-12-131-1/+0
| | | | | | | Drop myself from maintainership of 'cake'. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> (cherry picked from commit c7f8bcede6be73d0c07e058d57b55e4efc746440)
* netfilter: add iptables-mod-rpfilter packageAlin Nastac2017-12-131-0/+18
| | | | | | | | | | Unlike /proc/sys/net/ipv4/conf/INTF/rp_filter flag, rule iptables -t raw -I PREROUTING -m rpfilter --invert -j DROP prevents conntrack table to become full when a packet flood with randomly selected source IP addresses is received from the lan side. Signed-off-by: Alin Nastac <alin.nastac@gmail.com> (cherry picked from commit d8748e537f11ab5f2b5e2ed25d94baa5ce353984)
* mac80211: gracefully handle preexisting VIFJo-Philipp Wich2017-12-131-0/+6
| | | | | | | | | | | | | | | | | | | | | Gracefully handle cases where the to-be-created wireless interface already exists on the system which might commonly happen with non-multi-SSID capable wireless drivers. This fixes commit 8301e613655c2d95fa5430a1a57d92d966fdc70b which caused previously ignored "Too many open files in system (-23)" errors to fail the wireless setup procedure. With the updated approach we'll still try recreating the vif after one second if the first attempt to do so failed with ENFILE but we will now consider the operation successfull if a second attempt still yields ENFILE with the requested ifname already existing on the system. Fixes FS#664, FS#704. Suggested-by: Vittorio Gambaletta <openwrt@vittgam.net> Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 4a033475453b63d0d5ae41489e7c395882567698)
* kernel: allow selecting RTC drivers on targets without explicit RTC supportFelix Fietkau2017-12-131-8/+15
| | | | | | | Keep them disabled by default to avoid pulling in extra kernel bloat Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 5afe9a054cbcb1630a42200f3ac799432522a87d)
* mac80211: Fix race condition leading to wifi interfaces not coming up at ↵Vittorio Gambaletta2017-12-131-5/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | boot sometimes. In the drv_mac80211_setup function, mac80211_interface_cleanup is called to ask the kernel to delete all existing interfaces for the phy that is being configured via netlink. Later in the first function, mac80211_prepare_vif is called to set up the new interfaces as required. But sometimes, when mac80211_prepare_vif (and so the relevant `iw phy x interface add y` command) runs, the kernel might still be cleaning up the old interface with the same ifname. It usually takes very few time to do that; possibly a few milliseconds of sleep in the script after detecting this error condition could be enough, but the busybox sh does not support sub-second sleep intervals. When this happens, iw obviously fails to create the new interface; and the following message is printed in the system log, followed by subsequent failure messages from hostapd in case this would have been an AP interface. Tue Mar 14 04:21:57 2017 daemon.notice netifd: radio1 (2767): command failed: Too many open files in system (-23) This was a long-standing issue existing since at least OpenWrt Backfire, and today I finally managed to debug and (hopefully) solve it. It was happening very few times on most devices; but it was happening a lot more frequently on fast platforms with multiple radios, such as the powerpc-based dual-ath9k-radio tl-wdr4900-v1. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> (cherry picked from commit 8301e613655c2d95fa5430a1a57d92d966fdc70b)
* mt76: update to the latest versionFelix Fietkau2017-12-041-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Significant performance/stability improvements for MT76x2 and MT7603. Adds LED support. Changes: 2895775 mt76x2: mcu: remove unused parameter in mt76x2_mcu_msg_alloc signature 1dae8f0 mt7603: mcu: remove unused parameter in mt7603_mcu_msg_alloc() signature 5e49aa9 Fix errors found by cppcheck 1b8c8a0 mt7603: add LED definition registers 4d83561 mt76x2: add LED register definitions 2f40e4a mt76x2: Support using PCI ID as chip ID 27c64bc mt76: add led support using mac80211 led framework dfd64fc mt76x2: init: add ma80211 led callbacks 215edf1 mt7603: init: add ma80211 led callbacks 9d36ff2 mt76x2: Add PCI identifier for MT7602 0b7984e mt7603: remove unnecessary mcu register read function f5498d2 debugfs: add support for changing the LED pin 8e453b3 mac80211: move DT led configuration to the "led" child node 8f1673a mt76x2: limit client WCID entries to 0-127 f9d9c22 mt76x2: clear drop flag for all WCIDs on init 0dd8b68 mt76x2: clear per-WCID tx rate lookup register 3e5afe7 mt76x2: add helper function for setting drop mask 941555b mt76x2: clear drop mask when sending a PS response 7dfb354 mt76: increase rx ring size for mt76x2 73902dc mt76x2: add rx statistics registers fe79816 mt76x2: fix LNA gain register annotation cc588c5 mt76x2: sync channel gain value with latest reference driver 60a4d67 mt76x2: implement dynamic AGC tuning based on false packet detection count 4bc9aa9 mt76x2: add more gain tuning based on the latest reference driver 0a0d16f mt76x2: sync tx power related values with reference driver 8c821aa mac80211: add missing include 82acc85 mt7603: add missing include required on newer kernels 2c1a77c mt76x2: fix transmission of encrypted management frames 0532315 mt76x2: increase OFDM SIFS time 1acde21 mt76x2: add channel argument to eeprom tx power functions 58364a2 mt76x2: initialize channel power limits c2bd89e mt76x2: convert between per-chain tx power and combined output e7eaa7c mt7603: rename mt7603_mac_reset to mt7603_pse_reset ea4c2a1 mt7603: rename MT_PSE_RESET register c86c3a0 mt7603: remove watchdog reset on interface stop 4490f93 mt7603: remove WARN_ON_ONCE for workaround checks 3075059 mt7603: simplify PSE reset 4ed7e07 mt7603: warn if PSE reset fails 7dc8db1 mt7603: clean up dma debug reads 41e6a04 mt7603: make mt7603_mac_watchdog_reset() static dc7a351 mt7603: clear wtbl PS bit for powersave responses 123acf2 mt7603: set tx-skip flag for powersave clients 7dd2a9e mt7603: initialize wtbl ps flag on station add 86ddef3 mt76x2: remove some harmless WARN_ONs in tx status and rx path e326bc2 mt7603: remove some harmless WARN_ONs in rx path Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport kernel fix for CVE-2017-13080Stijn Tintel2017-10-171-0/+81
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 2f701194c29da50bfda968a83c6609843f74a7f4)
* mac80211: Update wireless-regdb to master-2017-03-07Ryan Mounce2017-10-161-12/+19
| | | | | | | | | | | | | | | | | The short log of changes since the 2016-06-10 release is below. Jouni Malinen (1): wireless-regdb: Remove DFS requirement for India (IN) Ryan Mounce (1): wireless-regdb: Update rules for Australia (AU) and add 60GHz rules Seth Forshee (2): wireless-regdb: Update 5 GHz rules for Canada wireless-regdb: update regulatory.bin based on preceding changes Signed-off-by: Ryan Mounce <ryan@mounce.com.au> (cherry picked from commit 8b12e62e9cd6ba2e3bb2e7f2555180df0173c7c6)
* brcmfmac: backport length check in brcmf_cfg80211_escan_handler()Felix Fietkau2017-10-161-0/+63
| | | | | | Fixes CVE-2017-0786 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: sync with version 878456caf60d from masterFelix Fietkau2017-10-131-4/+4
| | | | | | | Backport required DT changes from commit dabdd123c90c. Significantly improves stability and performance for MT76x2 and MT7603 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ltq-vdsl-mei: revert disable optimized firmware downloadMathias Kresin2017-09-301-2/+2
| | | | | | | | | | | | This reverts commit b428f45c062dc8ca8c2f35f491fa467dc5b85519. If the optimized firmware download is disabled, the xdsl subsystem hangs in the "idle request" state after physically disconnecting and reconnecting the xdsl modem from the line. It might fix the failing line init on boot as well. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ltq-vdsl-mei: disable optimized firmware downloadMathias Kresin2017-09-281-2/+2
| | | | | | | | | With ltq-vdsl-mei 1.5.17.6 an optimized firmware download was added and enabled by default. As soon as the optimized firmware download is enabled, a watchdog based reboot is trigger between 24h to 48h of uptime if the board isn't connected to a xdsl line. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ltq-vdsl: fix PM thread suspend and resume handlingMartin Schiller2017-09-282-1/+108
| | | | | | | | This is a backport form drv_dsl_cpe_api-4.18.10 and fixes some PM thread handling issues which lead to high system load and watchdog trigger within 1h of uptime for boards not connected to a xdsl line. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* treewide: fix shellscript syntax errors/typosLorenzo Santina2017-09-132-2/+2
| | | | | | | | | Fix multiple syntax errors in shelscripts (of packages only) These errors were causing many conditions to not working properly Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> [increase PKG_RELEASE, drop command substitution from directip.sh] Signed-off-by: Mathias Kresin <dev@kresin.em>
* kernel: netfilter: fix nf-nathelper(-extra) descriptionUwe Arnold2017-07-251-2/+2
| | | | | | | | | The tftp and irc netfilter modules are provided by nf-nathelper-extra and not by nf-nathelper. Signed-off-by: Uwe Arnold <donvipre@gmail.com> [move the irc module as well] Signed-off-by: Mathias Kresin <dev@kresin.me>
* mwlwifi: update to version 10.3.4.0 / 2017-06-06Jo-Philipp Wich2017-06-081-3/+3
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mac80211, hostapd: always explicitly set beacon intervalMatthias Schiffer2017-05-272-5/+7
| | | | | | | | | | | | | | | | One of the latest mac80211 updates added sanity checks, requiring the beacon intervals of all VIFs of the same radio to match. This often broke AP+11s setups, as these modes use different default intervals, at least in some configurations (observed on ath9k). Instead of relying on driver or hostapd defaults, change the scripts to always explicitly set the beacon interval, defaulting to 100. This also applies the beacon interval to 11s interfaces, which had been forgotten before. VIF-specific beacon_int setting is removed from hostapd.sh. Fixes FS#619. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: fix autoloading arch-specific modulesYousong Zhou2017-05-253-9/+9
| | | | | | Fixes FS#745 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* backlight-pwm: fix module descriptionYousong Zhou2017-05-251-1/+1
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* om-watchdog: add support for Teltonika RUT5xx (ramips)Steffen Weinreich2017-05-152-1/+10
| | | | | | | | | | | Add rut5xx GPIO PIN selection to om-package startup script. Testet on a RUT500 device, the timeout value of the hardware watchdog is about 280 sec. Signed-off-by: Steffen Weinreich <steve@weinreich.org> [split into two commits, bump PKG_RELEASE] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* om-watchdog: cosmetic code style fixesPiotr Dymacz2017-05-151-31/+31
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* om-watchdog: cleanup MakefilePiotr Dymacz2017-05-151-8/+0
| | | | | | Drop redundant Build/Prepare, empty lines and duplicated Build/Compile. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* mac80211: rt2800: fix mt7620 E2 channel registersTomislav Požega2017-05-021-0/+41
| | | | | | | | update RF register 47 and 54 values according to vendor driver Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [daniel@makrotopia.org: moved changes into a separate patch]
* mac80211: rt2800: fix mt7620 vco calibration registersTomislav Požega2017-05-021-0/+50
| | | | | | | | | | Use register values from init LNA function instead of the ones from restore LNA function. Apply register values based on rx path configuration. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [daniel@makrotopia.org: moved changes into a separate patch]
* mac80211: rt2x00: fix MT7620 LNA gain and VCO-after-ALCDaniel Golle2017-05-022-0/+88
| | | | | | | This should fix issues with bad RX as well as AP not coming up and/or scanning failing. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: import upstream changes and rebase our patchesDaniel Golle2017-05-0249-189/+1676
| | | | | | | | Some of our local patches have been accepted upstream. And there are some more relevant changes (mostly for rt2800usb). Import them and rebase our remaining local patches on top. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* rt2x00: mt7620: make fixes requested upstreamDaniel Golle2017-05-021-170/+674
| | | | | | | | Introduce RT6352 instead of matching against RF7620. Clean up channel setting rfvals. Port bandwidth filter calibration. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* rt2x00: mt7620: yet another beauty sessionDaniel Golle2017-05-021-171/+524
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So here is another round of improvements for MT7620 WiFi. This commit fixes a few significant issues related to TX_PWR_CFG_x and TX_ALC and also makes the code more readable by adding register descriptions for things added for MT7620 and use the usual bit-field access macros and the now defined macros instead of plain bit-ops and magic numbers. Properly describe EEPROM_TARGET_POWER at word 0x68 (== byte 0xD0) and thereby fix internal TXALC which would otherwise just read out-of-bounds of the EEPROM map. Split-out tx-power/ALC related stuff into an additional function. Fix VCO calibration, it was carried out properly in the channel switching but incomplete in the actual VCO calibration function. Also there is no need to trigger VCO calibration in channel switching, the VCO calibration function is already being called at this point. Remove it from channel switching function to avoid redundant code. The TX power calibration differs significantly from all other Mediatek/Ralink chips: They finally allow 0.5dB steps stored as 8-bit values for (almost) each bitrate -- and promptly ran out of space and for some reason didn't want to change the EEPROM layout. The hence opted for a scheme of sharing values for some adjecent bitrates and a highly over-complicated (or obfuscated?) way to populate the TX_PWR_CFG_x registers with the values stored in the EEPROM. The code here now looks much less complicated than what you see in the vendor's driver, however, it does the exact same thing: bGpwrdeltaMinus is a constant and always TRUE, hence half of the code was dead. Gpwrdelta is always 0 (rather than using the value read from the EEPROM). What remains is some very grotesque effort to avoid 0x20, probably some hardware bug related to some misunderstanding of what a singed 8-bit value is (imagine: if it was a signed 6-bit value then someone could believe that 0x20 == 0x0). And then they didn't clean it up once they later on anandonned that whole story of having a constant offset for 40 MHz channels and just set the offset to be constant 0 -- there is no effort for avoiding 0x20 for the 20 MHz values stored in the EEPROM, hence that's probably just a forbidden value in the EEPROM specs and won't appear anyway... Anyway, the whole thing felt like solving some college math test where in the end everything cancels out and the result equals 0 ;) To make sure that channel bandwidth power compensation really doesn't need to be taken care of, output a warning when the corresponding value stored in the EEPROM is non-zero. Also there is no apparent reason to refrain from initializing RFCSR register 13, it doesn't fail what-so-ever. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: add rt2x00 debug symbols to PKG_CONFIG_DEPENDSJonas Gorski2017-05-021-0/+2
| | | | | | | Chaning these symbols require a recompilation of the modules, so make the system aware of it. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ath9k: fix power limits on initFelix Fietkau2017-05-021-0/+47
| | | | | | | | | | | | | | | The tx power applied by set_txpower is limited by the CTL (conformance test limit) entries in the EEPROM. These can change based on the user configured regulatory domain. Depending on the EEPROM data this can cause the tx power to become too limited, if the original regdomain CTLs impose lowr limits than the CTLs of the user configured regdomain. To fix this issue, set the initial channel limits without any CTL restrictions and only apply the CTL at run time when setting the channel and the real tx power. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath: do not apply broken power limits with ATH_USER_REGDFelix Fietkau2017-05-023-12/+44
| | | | | | | | | If a device uses the default EEPROM code, typically only the main CTLs are valid, and they do not apply properly when switching to a different regulatory domain. If the regdomain deviates from the EEPROM one, force the world roaming regdomain to ensure that power limits are sane Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: ensure that the metapackage gets built as .ipkFelix Fietkau2017-04-051-0/+4
| | | | | | Fixes errors during the image builder run Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport an upstream fix for queue start/stop handlingFelix Fietkau2017-04-031-0/+29
| | | | | | Fixes issues with 802.11s Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: mwifiex-sdio: select DRIVER_11AC_SUPPORTÁlvaro Fernández Rojas2017-03-111-1/+1
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mac80211: mwifiex-pcie: select DRIVER_11AC_SUPPORTÁlvaro Fernández Rojas2017-03-111-1/+1
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mac80211: add support for Marvell 802.11n/802.11ac SDIO Wireless cardsHenryk Heisig2017-03-111-1/+18
| | | | | | | | This adds option to build kernel module and firmware packages for a Marvell 8887 SDIO Wireless device Signed-off-by: Henryk Heisig <hyniu@o2.pl> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708-gpu-fw: update to latest versionÁlvaro Fernández Rojas2017-03-081-8/+8
| | | | | | This is needed in order to add support for the new RPi Zero W Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: add Chinese codepagesHsing-Wang Liao2017-03-011-0/+32
| | | | Signed-off-by: Hsing-Wang Liao <kuoruan@gmail.com>
* leds-apu2: Add PC Engines APU2 LED driverChris Blake2017-03-014-0/+435
| | | | | | | This adds support for the PCB LEDs and Reset Button found on the PC Engines APU2/APU3 embedded boards. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* netfilter: re-enable TEE support for kernel 4.4Koen Vandeputte2017-03-011-1/+1
| | | | | | | | | It got disabled in commit 4454a3fb6375cf1adf17f63a54cd7660bc40caa7 but works nicely these days. Tested on cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* gpio-nct5104d: Add nct5104d driver packageChris Blake2017-03-014-0/+519
| | | | | | | | | | | | | | This adds support for the SuperIO chip nct5104d found on the PC Engines APU boards, which allows for a handful of additional ports, such as 2x additional UART pinouts, enabling an external watchdog (no driver for this functionality yet), and 16 GPIO pins. More info can be found at https://pcengines.ch/ht_gpio.htm Thanks to @feckert for helping package this. Cc: Florian Eckert <Eckert.Florian@googlemail.com> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* x86: drop ep80579-driversMathias Kresin2017-03-0129-13884/+0
| | | | | | | | The subtarget on which the driver still depends was removed with dee8986b95dcc200550faebe49c143e5d2357c60 because it was unmaintained for a long time. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mac80211: hwsim: select DRIVER_11AC_SUPPORT and DRIVER_11W_SUPPORTYousong Zhou2017-02-261-1/+1
| | | | | | | | This is required for default wireless configuration of malta target to work out of the box again. Fixes "77ece30e: hostapd: Add ability to specify that that wireless driver supports 802.11ac" Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* acx-mac80211: fix scan API error that could lead to a crashFelix Fietkau2017-02-241-0/+29
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: sync with master branch as of 9edff13abd97Felix Fietkau2017-02-24214-12942/+1799
| | | | | | | | | | | | | | | | Includes the following changes: 9edff13abd mac80211: disable potentially harmful PS software retry for A-MPDU sessions 75216a76b0 mac80211: backport upstream fix for CSA in IBSS mode 368cc8ef47 mac80211: update brcmfmac backporting brcmf_err cleanups 66a63d25c4 mac80211: fix build on linux 3.18 9eacb9d7fc rt2x00: mt7620: lots of improvements fd94fa61a7 mac80211: brcmfmac: update Raspberry Pi patches for linux 4.9 649e766a64 mac80211: update to wireless-testing 2017-01-31 47540afa5d ath9k: add a warning to the tx99 config option b367eef21d mac80211: rt2x00: add support for external LNA on MT7620 9200e168f2 mac80211: move (& update) upstream accepted brcmfmac patches Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: depend on kmod-hwmon-core, it gets used when CONFIG_THERMAL is setFelix Fietkau2017-02-241-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: fix kernel api compatibility issuesFelix Fietkau2017-02-242-0/+108
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: Fix performance of 2x2 hardware running 3x3 firmware.Ben Greear2017-02-241-3/+3
| | | | | | | The driver had a bug when calculating the rateset. This resolves that and allows full VHT mcs rates on 2x2 hardware. Signed-off-by: Ben Greear <greearb@candelatech.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 08:43:18 +0000