aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel
Commit message (Collapse)AuthorAgeFilesLines
...
* mac80211: ath10k: use tpt LED trigger by defaultMathias Kresin2018-06-251-0/+53
| | | | | | | | Use the tpt LED trigger for each created phy led. Ths way LEDs attached to the ath10k GPIO pins are indicating the phy status and blink on traffic. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mac80211: drop 355-ath9k-limit-retries-for-powersave-response-frames.patchJohn Crispin2018-06-2219-243/+157
| | | | | | several people reported this bug to be causing drop out issues Signed-off-by: John Crispin <john@phrozen.org>
* mac80211: ath10k fix vht160 firmware crashAnsuel Smith2018-06-222-0/+182
| | | | | | When the 160mhz width is selected the ath10k firmware crash. This fix this problem. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* mac80211: ath10k add leds supportAnsuel Smith2018-06-221-0/+617
| | | | | | This adds support for leds handled by the wireless chipset. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* kernel: define THERMAL_EMERGENCY_POWEROFF_DELAY_MSStijn Tintel2018-06-211-0/+1
| | | | | | | | Enabling CONFIG_ATH10K_THERMAL on targets that don't have CONFIG_THERMAL enabled in their kernel config causes build to fail due to missing symbol THERMAL_EMERGENCY_POWEROFF_DELAY_MS. Add it to kmod-thermal. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ltq-vdsl-fw: fix ltq-vdsl-vr9-vectoring-fw-installer package installDaniel Golle2018-06-211-1/+1
| | | | | | | The package is not being generated otherwise, which is fatal because it is part of the subtargets default package set... Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mt76: update to the latest versionFelix Fietkau2018-06-211-3/+3
| | | | | | 1d4ca10 mt76x2: track rssi for gain adjustment per station Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ltq-vdsl-fw: add meaningful version informationDaniel Golle2018-06-201-1/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ltq-vdsl-fw: add nonshared flagDaniel Golle2018-06-191-0/+2
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mwlwifi: update to version 10.3.8.0-20180615Kabuli Chana2018-06-191-4/+13
| | | | | | | | fix mcs rate for HT support 88W8997 protect rxringdone Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
* kernel/modules: kmod-chaoskey: Add missing dependencyHauke Mehrtens2018-06-181-0/+1
| | | | | | | | This new package was missing the dependency to kmod-random-core which caused some build errors. Fixes: 163ab9135a9 ("kernel/modules: add chaoskey module, hardware TRNG") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ltq_atm: burn ifx_atm_alloc_tx with fireKevin Darbyshire-Bryant2018-06-181-44/+1
| | | | | | | | Drop code that was never used. Tested on: BT HomeHub 5a Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel/modules: add chaoskey module, hardware TRNGHannu Nyman2018-06-181-0/+15
| | | | | | | | | | | | | | Package the driver for Chaoskey, a USB dongle that provides a True Random Number Generator (TRNG) and feeds entropy to kernel. Chaoskey driver is included the upstream Linux sources, so only packaging it is needed. Run-tested with ipq806x/R7800 and mvebu/WRT3200ACM. (Requires CONFIG_HW_RANDOM kernel option.) Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* mt76: update to the latest versionFelix Fietkau2018-06-181-3/+3
| | | | | | | 072fdac mt76x2: mac: consider multicast/broadcast frames in ewma rssi estimation f450659 mt76x2: improve gain adjustment in noisy environments Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport brcmfmac changes from kernel 4.18Rafał Miłecki2018-06-1811-0/+631
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: backport brcmfmac firmware & clm_blob loading reworkRafał Miłecki2018-06-188-41/+1392
| | | | | | It backports remaining brcmfmac changes from 4.17. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: backport brcmfmac data structure reworkRafał Miłecki2018-06-1710-9/+1426
| | | | | | It backports brcmfmac commits from kernel 4.17. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: backport "brcmfmac: cleanup and some rework" from 4.17Rafał Miłecki2018-06-179-1/+772
| | | | | | | | | | | It was described by Arend as: > This series is intended for 4.17 and includes following: > > * rework bus layer attach code. > * remove duplicate variable declaration. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mt76: update to the latest versionFelix Fietkau2018-06-151-3/+3
| | | | | | | | | | | | 9090f9c mt76x2: fix threshold for gain adjustment 2cbaa57 mt76x2: fix swapped values for RXO-18 in gain control a39ab70 mt76x2: adjust AGC control register 26 based on gain for VHT80 4936c0c mt76x2: clear false CCA counters after changing gain settings 1528fe7 mt76x2: fix variable gain adjustment range f3522e1 mt76x2: add a debugfs file to dump agc calibration information 65e161b mt76x2: fix tracking rssi for dynamic gain adjustment Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ltq-vdsl-fw: strip legacy dsl_fw logicDaniel Golle2018-06-151-11/+1
| | | | | | We unfortunately dropped support for persistent in-flash DSL firmware. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* lantiq-vdsl-fw: update to provide recent vectoring firmwareDaniel Golle2018-06-153-11/+12
| | | | | | | | | | | | | | Recent Speedport firmware downloads only work over HTTPS, so the user either needs to provide the already downloaded file or install ustream-ssl-* as well as ca-certificates or ca-bundle. So to get VDSL2 with vectoring on xRX200, simply run vdsl_fw_install.sh on the target and either provide the downloaded file as instructed or make sure the device is connected to the Internet and can download that HTTPS url itself. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Revert "lantiq: get rid of ltq-vdsl-fw"Daniel Golle2018-06-159-0/+1259
| | | | | | This reverts commit 0938233fcdef67d969f9429a10761cc640c6d56d. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel/modules: fix kmod-mdio-gpio module dependenciesHauke Mehrtens2018-06-101-1/+1
| | | | | | | | | | | On some targets this module depends on kmod-of-mdio. This is similar to the fixes done in: dc629d9cf5a ("kernel: fix kmod-switch-rtl8366-smi dependency") 56bd23cf529 ("kernel: let kmod-rtl8366-smi conditionally depend on kmod-of-mdio") Fixes: 32f32398af976e ("kernel/modules: add kmod-mdio-gpio module") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel/modules: add kmod-switch-rtl8306 moduleMartin Schiller2018-06-091-0/+16
| | | | | | | Add kernel module for kmod-switch-rtl8306. Signed-off-by: Florian Eckert <fe@dev.tdt.de> Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* kernel/modules: add kmod-mdio-gpio moduleMartin Schiller2018-06-091-0/+20
| | | | | | | Add kernel module package for kmod-mdio-gpio. Signed-off-by: Florian Eckert <fe@dev.tdt.de> Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* kernel/modules: add kmod-adcxx moduleFlorian Eckert2018-06-091-0/+22
| | | | | | Add kernel module package for kmod-adcxx. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* kernel/modules: add kmod-random-tpm moduleMartin Schiller2018-06-091-0/+16
| | | | | | | Add kernel module package for kmod-random-tpm. Signed-off-by: Florian Eckert <fe@dev.tdt.de> Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* mac80211: ath10k: Allow to enable the thermal code of ath10kSven Eckelmann2018-06-094-3/+24
| | | | | | | | | | | | | | | Some ath10k firmware versions allow to access the chip internal a temperature sensor and allow to reduce the amount of the time when the card is allowed to send. The latter is required on devices which tend to overheat. An userspace service has to read /sys/class/ieee80211/phy*/device/hwmon/hwmon*/temp1_input regularly and then decide how much the device has to be throttled. This can be done by writing to /sys/class/ieee80211/phy*/device/cooling_device/cur_state. By default it is not throttled (0) but it can be throttled up to 100(%). Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* ltq-vdsl-mei: reset g_tx_link_rate on showtime exitMartin Schiller2018-06-091-0/+12
| | | | | | | | | | | | Without this change, ifx_mei_atm_showtime_check() will always return "showtime" after one call of MEI_InternalXtmSwhowtimeEntrySignal() was done, even if MEI_InternalXtmSwhowtimeExitSignal() was called in the meantime. The ifx_mei_atm_showtime_check() function is used by the ltq-atm and ltq-ptm driver. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* brcm2708: Update brcm2708-gpu-fw packageChristo Nedev2018-06-071-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem - rapsberry pi 3 b/b+ does not boot with bcm2710 images! How Raspberry Pi boots Actualy? When Raspberry is switched on GPU is activated. 1. GPU execute First stage bootloader from ROM. First stage bootloader mount the FAT boot partition on the SD card and execute second stage bootloader (bootcode.bin). 2. Second stage bootloader (bootcode.bin) activate SDRAM. Load the GPU firmware (start.elf). 3. GPU firmware (start.elf) a) display Rainbow splash. b) read firmware configuration file config.txt and split the RAM using fixup.dat. c) loads a cmdline.txt d) enables the CPU. e) loads the kernel image configurable via config.txt In your target/linux/brcm2708/image/config.txt 493 ## kernel (string) 494 ## Alternative name to use when loading kernel. 495 ## 496 #kernel="" it is not configured! But in your target/linux/brcm2708/image/Makefile 75 KERNEL_IMG := kernel8.img 76 DEVICE_TITLE := Raspberry Pi 3B/3B+ you have kernel8.img GPU Firmware search order by default for a PI 3 is: kernel8.img if found boot in 64 bit mode kernel8-32.img if found boot in 32 bit mode kernel7.img if found boot in 32 bit mode kernel.img if found boot in 32 bit mode But a PI 2 will start the search from kernel7.img and a PI 1 only looks for kernel.img. Оbviously the kernel has been found. But something goes wrong and the device is restarted. In your package/kernel/brcm2708-gpu-fw/Makefile 11 PKG_NAME:=brcm2708-gpu-fw 12 PKG_VERSION:=2017-08-08 13 PKG_RELEASE:=e7ba7ab135f5a68b2c00a919ea9ac8d5528a5d5b boot loader is 10 monts old. In conclusion, the best way to solve the problem is to update the boot loader! Fixup_cd.dat and start_cd.elf files are not necessary. These are used when GPU memory is set to 16 MB, which disables some GPU features. I did not remove them just in case! cheers Signed-off-by: Christo Nedev <christo.nedev@gmail.com>
* kernel: modules: package module for Exar 8250 UARTsDaniel Golle2018-06-051-0/+16
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mt76: update to the latest versionFelix Fietkau2018-06-051-3/+3
| | | | | | | | | | | | | | | 20c0766 mt7603: adjust rx hang watchdog for MT7628 664e321 mt7603: add extra PSE hang check signature for MT7628 f24b56f update MT7628 firmware to the latest version d87e4b0 mt7603: clear PSE reset bit if PSE reset fails 0ef26ef mt76: only stop tx queues on offchannel, not during the entire scan f399da3 mt76: prevent tx scheduling during channel change 21c1e1e mt76: move ieee80211_hw allocation to common core 730c292 mt76: wait for pending tx to complete before switching channel fcbb49e mt76x2: use udelay instead of usleep_range in mt76x2_mac_stop 792dbe0 mt7603: do not hold dev->mutex while flushing dev->mac_work Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: Update driver to latestKoen Vandeputte2018-06-011-3/+3
| | | | | | | | | | 127f98189ee5 ath10k: Fix bad return w/out unlock, compile w/out debugfs b8f48f3c138f Fix survey-dump for 4.7, 4.9 and 4.13 kernels. fa8259ad5d6d ath10k-ct: Support survey dump in 10.1 firmware. 2853e1337ecf ath10k-ct: Add 4.16 ath10k-ct driver to package. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> CC: Ben Greear <greearb@candelatech.com>
* mac80211: rt2x00: no longer use TXOP_BACKOFF for probe framesDaniel Golle2018-05-282-1/+48
| | | | | | | Import a revert-commit from Stanislaw Gruszka which significantly improves WiFi performance on rt2x00 based hardware. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: add missing softdog symbolJohn Crispin2018-05-271-1/+2
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ath79: make ahb wifi workJohn Crispin2018-05-242-4/+339
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* kernel: merge kmod-fbcon with kmod-fbTomasz Maciej Nowak2018-05-211-36/+14
| | | | | | | | | | | | | As of commit in kernel: 6104c37094 fbcon: Make fbcon a built-time depency for fbdev framebuffer console is build in into framebuffer module and there's no standalone fbcon module. Therefore drop the kmod-fbcon and enable console in kmod-fb. The only targets which use these modules are imx6 and geode, both are on kernel 4.14 so no fallback for other kernels is introduced. Being at that this commit also fixes autoload of fbdev for x86. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* kernel: Add configfs support for USB HID gadgetHarvey Phillips2018-05-211-0/+17
| | | | | | | Added a rule to usb.mk to build usb_f_hid.ko for configfs support Tested on a Raspberry Pi Zero W Signed-off-by: Harvey Phillips <xcellerator@gmx.com>
* mt76: update to the latest versionFelix Fietkau2018-05-181-3/+3
| | | | | | | 73edb22 mt76: discard early received packets if not running yet 0b8d1dd mt76: fix beacon timer drift Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: whitespace fixesJohn Crispin2018-05-181-2/+0
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* kmod-sched-cake: bump to latest 20180515Kevin Darbyshire-Bryant2018-05-161-3/+3
| | | | | | | | Following changes as part of the kernel upstreaming attempts. And fix a slight fsck up when calculating overheads for GSO packets. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mt76: update to the latest versionFelix Fietkau2018-05-151-3/+3
| | | | | | | | | b2ecc52 mt76x2: fix avg_rssi estimation fd58b28 mt76x2: add a polling delay in mt76x2_mac_stop routine a78673d mt76: fix sending encrypted broadcast packets for secondary interfaces e87f925 mt76x2: apply coverage class on slot time too Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: refactor non-{sae,dfs} mesh initializationDaniel Golle2018-05-152-47/+48
| | | | | | | | | | | | Refactor mesh initialization into a separate function, do some cleaning on the way to make the code more readable. Changes: * Move iw mesh setup to new mac80211_setup_mesh() * fallback on 'ssid' parameter in case 'mesh_id' isn't set * move setting of freq variable to shared code as it is needed for both, the wpa_supplicant and the iw based setup. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: Re-enable encrypted 11s meshpointSven Eckelmann2018-05-142-2/+2
| | | | | | | | | | The commit 574e4377fad5 ("mac80211: properly setup mesh interface") uses the variable $wpa to decide whether encrypted meshpoint is requested by the user or not. But the variable $wpa will only be set correctly after the function wireless_vif_parse_encryption is called. Fixes: 574e4377fad5 ("mac80211: properly setup mesh interface") Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* mac80211: properly setup mesh interfaceDaniel Golle2018-05-142-4/+15
| | | | | | | Setup wpa_supplicant for encrypted mesh or when using DFS channels and adjust interface setup to pass fixed frequency for mesh mode. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: let kmod-rtl8366-smi conditionally depend on kmod-of-mdioJo-Philipp Wich2018-05-131-1/+1
| | | | | | | | | | | | We cannot depend on CONFIG_OF in the module definition context as this symbol is not defined for OpenWrt menuconfig. Depend on the targets that appear to need the kmod-of-mdio module instead. The target dependency list may not be complete, it is based on the build failures encountered by the build bots. Fixes: dc629d9cf5 ("kernel: fix kmod-switch-rtl8366-smi dependency") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: fix kmod-switch-rtl8366-smi dependencyJohn Crispin2018-05-101-1/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* kernel: fix chipidea2 dependenciesJohn Crispin2018-05-091-1/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* kmod-sched-cake: bump to latest cake 2018-05-07Kevin Darbyshire-Bryant2018-05-081-3/+3
| | | | | | | | | | | | | | No functional change. Code tidy ups. 735eaf2 Make sure we don't reallocate q->tins (we didn't anyway but his really makes sure) 6c5ad6e Get rid of __GFP_NOWARN flag for memory allocation 2a37333 Don't need the wrapper for kvfree, and no need to check before calling it 2b1c631 Whitespace fix 7fe6e28 compat tidyup (for older kernel versions <4.4) 93b805c pedant tidy up superfluous semicolons on switch statements Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: fix build error for external kernel.Sandeep Sheriker Mallikarjun2018-05-072-6/+15
| | | | | | | | | | fixed build error when external kernel is selected from menuconfig. The patches present in target/linux/generic does not gets applied to external kernel and build fails while compiling mac82011 & regmap-core kernel modules. as a fix added check in Makefile for CONFIG_EXTERNAL_KERNEL_TREE present or not. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>