aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: don't pass the hostapd ctrl iface in adhocAntonio Quartulli2017-11-151-2/+8
| | | | | | | Passing the ctrl iface to wpa_supplicant will automatically cause wpa_supplicant to send "STOP_AP" messages to the hostapd. This breaks the AP interfaces. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* ltq-ptm: add missing depency to ltq-?dsl-*-meiJonas Gorski2017-11-071-0/+5
| | | | | | | Add the required dependency to the mei driver as cought by the depenceny checker. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ltq-atm: fix dependency for xrx200Jonas Gorski2017-11-071-1/+1
| | | | | | | Ad the missing dependency for the xrx200 variant, which depends on the vdsl mei driver. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ltq-adsl-mei: use the same file name for all variantJonas Gorski2017-11-073-8/+4
| | | | | | | | | | | Due to limitations in the symvers treatment and the mei drivers exporting the same funtions, modpost might use the wrong mei driver to link against. Work around this by renaming them all to the same name, making it always the "right" module name even if the wrong file was used. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* partially revert "mwlwifi: switch to AutoProbe"Jonas Gorski2017-11-071-1/+1
| | | | | | | | | | | | | Apearently we need to ensure mwlwifi loads before mwifiex on the WRT3200ACM, else mwifiex will claim the wifi. Fix this by reverting to AutoLoad, but keep the removal of mac80211 line. This partially reverts commit 471d5dc6e3c16a2bef9bde2b788b563a00357292. Fixes: 471d5dc6e3c1 ("mwlwifi: switch to AutoProbe") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* netfilter, iptables: add optional CHECKSUM moduleDenis Osvald2017-11-061-0/+17
| | | | Signed-off-by: Denis Osvald <denis.osvald@sartura.hr>
* package: kernel: dtc: Add DTO supportMarek Vasut2017-11-061-0/+642
| | | | | | Add patch with the DT overlay support into the DTC package. Signed-off-by: Marek Vasut <marex@denx.de>
* ath9k: unset the default LED pin if used by platform buttonsMathias Kresin2017-11-041-4/+7
| | | | | | | | | | Unset the default LED gpio pin if the same gpio pin is used by a button defined via platform button. It prevents the change of the GPIO value on wireless up/down or wireless traffic. Fixes: FS#1129 Signed-off-by: Mathias Kresin <dev@kresin.me>
* ltq-atm: add missing dependency to kmod-ltq-adsl-*-meiMathias Kresin2017-11-031-2/+2
| | | | | | | | | | | | | Commit 2e496876c60 fixed the generation of the depends line for external kernel modules which makes it possible for the build system to automatically detect this missing dependency. This fixes the packaging of kmod-ltq-atm for the ar9, xway and xway-legacy subtarget. Fixes: FS#1124 Signed-off-by: Mathias Kresin <dev@kresin.me>
* acx-mac80211: allow compilation on 4.9Jonas Gorski2017-10-291-1/+1
| | | | | | acx-mac80211 compiles fine with 4.9, so no reason to not allow it. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ar7-atm: fix function signatures with expected onesJonas Gorski2017-10-292-0/+126
| | | | | | | Newer kernels treat differing signatures an error, not just a warning, so fix the signatures to match. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ar7-atm: fixup proc fixesJonas Gorski2017-10-296-24/+90
| | | | | | | They were incomplete, so fix them to properly update the function signatures to what is expected. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ar7-atm: drop LINUX_VERSION testsJonas Gorski2017-10-2914-339/+199
| | | | | | | | | Minimum supported kernel is 3.18, so we don't need to test for anything older. In addition, the API hasn't changed since then, so we don't need to check for any kernel version at all. This helps to keeps the amount of changes more managable. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ltq-atm: Add missing dependency to kmod-ltq-adsl-ase-meiHauke Mehrtens2017-10-291-1/+1
| | | | | | | | | Commit 2e496876c60 fixed the generation of the depends line for external kernel modules which makes it possible for the build system to automatically detect this missing dependency. This fixes the build bot build of the lantiq/aes target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* build: use KERNEL_MAKE_FLAGS for kernel file compilationsKarl Vogel2017-10-2918-36/+18
| | | | | | | The build system already defines KERNEL_CROSS which defaults to TARGET_CROSS. Make use of this variable for kernel makefiles. Signed-off-by: Karl Vogel <karl.vogel@gmail.com>
* mwlwifi: switch to AutoProbeJonas Gorski2017-10-271-1/+1
| | | | | | | Now that we have working module dependency generation, we can switch to AutoProbe and let modprobe handle loading required modules. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* mt76: switch to AutoProbeJonas Gorski2017-10-271-3/+2
| | | | | | | Now that we have working module dependency generation, we can switch to AutoProbe and let modprobe handle loading required modules. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* mac80211: ath10k: switch to AutoProbeJonas Gorski2017-10-271-1/+1
| | | | | | | Now that we have working module dependency generation, we can switch to AutoProbe and let modprobe handle loading required modules. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* broadcom-wl: switch to AutoProbeJonas Gorski2017-10-271-1/+1
| | | | | | | Now that we have working module dependency generation, we can switch to AutoProbe and let modprobe handle loading required modules. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* broadcom-wl: reorder kmod build and pass EXTRA_VERSIONSJonas Gorski2017-10-271-5/+7
| | | | | | | | | Reoder the build to build the glue module first and pass the glue module's Module.symvers to the wl driver builds. This allows modpost to properly store a wl_glue dependency in the driver. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* broadcom-wl: define module directoriesJonas Gorski2017-10-271-0/+2
| | | | | | | Define the module subdirs so our build system properly picks up the Module.symvers. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ath10k-ct: switch to AutoProbeJonas Gorski2017-10-271-1/+1
| | | | | | | Now that we have working module dependency generation, we can switch to AutoProbe and let modprobe handle loading required modules. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ath10k-ct: define module directoriesJonas Gorski2017-10-271-0/+1
| | | | | | | Define the module subdir so our buildsystem properly picks up the Module.symvers. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* acx-mac80211: drop PKG_BUILD_DEPENDSJonas Gorski2017-10-271-1/+0
| | | | | | | We already have a DEPENDS on mac80211, which should be enough to ensure headers are available before build. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* acx-mac80211: switch to AutoProbeJonas Gorski2017-10-271-1/+1
| | | | | | | Now that we have working module dependency generation, we can switch to AutoProbe and let modprobe handle loading required modules. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* mac80211: backport fixes for fix for CVE-2017-13080Jonas Gorski2017-10-262-0/+106
| | | | | | | Backport two fixes for the fix of CVE-2017-13080, preventing side channel attacks and making it work for TKIP. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ltq-atm: remove xrx200 special handlingMathias Kresin2017-10-251-5/+1
| | | | | | | | The lantiq ATM driver is load for all subtargets on demand now. There is not need to handle the xrx200 ATM driver in a special way any longer. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ltq-adsl-app: use notification based ATM/PTM driver loadMathias Kresin2017-10-251-2/+1
| | | | | | | This patch removes the fixed atm/ptm driver loading and switches to notification based driver loading. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: add kmod-iio-bmp280Stijn Tintel2017-10-231-0/+48
| | | | | | | | | | This driver supports the Bosch Sensortec BMP180/BMP280 pressure and temperature sensors. It also supports the BME280 sensors with an additional humidity channel. Tested I2C and SPI modes with a BME280 sensor on a Raspberry Pi Zero W. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: move IIO modules to iio.mkStijn Tintel2017-10-232-65/+72
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* broadcom-wl: fix compile with kernel 4.9Hauke Mehrtens2017-10-181-4/+5
| | | | | | | ENOENT could not be found by the compiler when compiling again kernel 4.9. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: backport kernel fix for CVE-2017-13080Stijn Tintel2017-10-171-0/+81
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* mac80211: ath6kl: add missing usb-core dependency to kmod-ath6kl-usbHauke Mehrtens2017-10-151-1/+1
| | | | | | | This fixes a build problem with many targets. Fixes 618ed77a17422a ("mac80211: add ath6kl kernel modules") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-macsec module for 4.9Christian Lamparter2017-10-151-0/+15
| | | | | | | | | | | | | | | | | | | MACsec/IEEE 802.1AE is useful to secure communication to and from endpoints at Layer 2. Starting with 4.6, the linux kernel provides a universal macsec driver for authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Note: LEDE can utilize MACsec with a static connectivity association key (static PSK) with the ip-full package installed. <http://man7.org/linux/man-pages/man8/ip-macsec.8.html> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* package/kernel/leds-apu2: add apu3 board detectionFlorian Eckert2017-10-151-1/+4
| | | | Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* package/kernel/leds-apu2: fix whitespacesFlorian Eckert2017-10-151-15/+15
| | | | Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* mac80211: add ath6kl kernel modulesBen Whitten2017-10-151-2/+47
| | | | | | Allow board to include the ath6kl kernel modules. Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
* mac80211: fix tx power regressionFelix Fietkau2017-10-131-1/+1
| | | | | | | Revert an accidental change that was introduced by having an old version of the patch in my git tree, which was merged in 609208597b6d Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2017-10-132-89/+3
| | | | | | | e781569 update to latest mac80211/cfg80211 API changes 37654d7 mt76x2: fix tx status ampdu length corner case Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: update to wireless-testing 2017-10-06Felix Fietkau2017-10-1316-202/+351
| | | | | | | Rework the code to get rid of some extra kernel module dependencies introduced in the last update. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: activate user space firmware loading againHauke Mehrtens2017-10-124-10/+46
| | | | | | | | | This backports a patch from kernel 4.14 to the ath10k-ct version based on kernel 4.13. Some devices are using a user space script to load the calibration data from the flash and this was not trigged any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-ct driver: use dma_alloc_coherent, 4.13 based driverBen Greear2017-10-121-6/+11
| | | | | | | | | | This should help ath10k work on systems with little or no IOMMU memory. apu2 can boot two 9888 NICs now, for instance. From upstream patch by Adrian Chadd. And, start building the 4.13 based CT ath10k driver. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ltq-vmmc: disable for falconMathias Kresin2017-10-041-1/+1
| | | | | | | The module fails to compile with falcon. Remove the falcon depends from the module to not (try to) compile it for falcon any longer. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ltq-ptm: mark AmazonSE support as brokenMathias Kresin2017-10-041-0/+3
| | | | | | | | Albeit ltq-ptm is supported on AmazonSE, the package fails to compile. Mark the AmazonSE variant as broken to not mark it unnecessary harder to fix (and test) the compile error. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mac80211: fix compile error on PowerPC (PPC_85xx)Hauke Mehrtens2017-10-011-0/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Including linux/interrupt.h in linux/hrtimer.h causes this error message on PowerPC builds on x86, ARM and MIPS it works: CC [M] /backports-4.14-rc2-1/compat/main.o In file included from /backports-4.14-rc2-1/backport-include/linux/printk.h:5:0, from ./include/linux/kernel.h:13, from /backports-4.14-rc2-1/backport-include/linux/kernel.h:3, from ./include/linux/list.h:8, from /backports-4.14-rc2-1/backport-include/linux/list.h:3, from ./include/linux/module.h:9, from /backports-4.14-rc2-1/backport-include/linux/module.h:3, from /backports-4.14-rc2-1/compat/main.c:1: ./include/linux/ratelimit.h: In function 'ratelimit_state_exit': ./include/linux/ratelimit.h:62:11: error: dereferencing pointer to incomplete type 'struct task_struct' current->comm, rs->missed); ^ ./include/linux/printk.h:279:37: note: in definition of macro 'pr_warning' printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) ^ ./include/linux/ratelimit.h:61:3: note: in expansion of macro 'pr_warn' pr_warn("%s: %d output lines suppressed due to ratelimiting\n", ^ The backport of the hrtimer_start() functions needs the linux/interrupt.h because some parts are defined there. Fix this by moving the hrtimer_start() backport to the linux/interrupt.h backport header file. Fixes: a8f63a0717f5: ("mac80211: update to backports-4.14-rc2") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: update to backports-4.14-rc2Hauke Mehrtens2017-10-01147-7114/+529
| | | | | | | | | | | | | | | | | | | | This updates mac80211 to backprots-4.14-rc2. This was compile and runtime tested with ath9k, ath10k and b43 with multiple stations and ieee80211w and in different scenarios by many other people. To create the backports-4.14-rc2-1.tar.xz use this repository: https://git.kernel.org/pub/scm/linux/kernel/git/backports/backports.git from tag v4.14-rc2-1 Then run this: ./gentree.py --git-revision v4.14-rc2 --clean <path to linux repo> ../backports-4.14-rc2-1 This also adapts the ath10k-ct and mt76 driver to the changed cfg80211 APIs and syncs the nl80211.h file in iw with the new version from backports-4.14-rc2. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ltq-vdsl-mei: revert disable optimized firmware downloadMathias Kresin2017-09-301-2/+2
| | | | | | | | | | | | This reverts commit b428f45c062dc8ca8c2f35f491fa467dc5b85519. If the optimized firmware download is disabled, the xdsl subsystem hangs in the "idle request" state after physically disconnecting and reconnecting the xdsl modem from the line. It might fix the failing line init on boot as well. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mt76: update to the latest version, improves mt7603 stabilityFelix Fietkau2017-09-281-3/+3
| | | | | | | | cb83f33 mt7603: mac: fix logic in mt7603_tx_hang() 21f20b4 mt7603: mac: fix register configuration in mt7603_rx_dma_busy() d5e945e mt7603: mcu: fix indentation of mcu command definition Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ltq-vdsl-mei: disable optimized firmware downloadMathias Kresin2017-09-281-2/+2
| | | | | | | | | With ltq-vdsl-mei 1.5.17.6 an optimized firmware download was added and enabled by default. As soon as the optimized firmware download is enabled, a watchdog based reboot is trigger between 24h to 48h of uptime if the board isn't connected to a xdsl line. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ltq-vdsl: fix PM thread suspend and resume handlingMartin Schiller2017-09-282-1/+108
| | | | | | | | This is a backport form drv_dsl_cpe_api-4.18.10 and fixes some PM thread handling issues which lead to high system load and watchdog trigger within 1h of uptime for boards not connected to a xdsl line. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 16:57:57 +0000