aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel
Commit message (Collapse)AuthorAgeFilesLines
* ath9k: register GPIO chip for OF targetsMathias Kresin2019-02-102-10/+19
| | | | | | | | | | | | | | | | | | | | This partitialy reverts commit f506de2cdaf9. Registering the GPIO chip without a parent device completely breaks the ath9k GPIOs for device tree targets. As long as boards using the devicetree don't have the gpio-controller property set for the ath9k node, the unloading of the driver works as expected. Register the GPIO chip with the ath9k device as parent only for OF targets to find a trade-off between the needs of driver developers and the broken LEDs and buttons seen by users. Fixes: FS#2098 Signed-off-by: Mathias Kresin <dev@kresin.me> (cherry picked from commit d35f2a5565fc51fb277f72a8565c871ce1785588)
* mt76: update to the latest versionFelix Fietkau2019-01-311-3/+3
| | | | | | | | | | | | | | | | a4ec45c mt7603: fix LED support (copy CFLAGS from main Makefile) edda5c5 mt76x02: use mask for vifs dd52191 mt76x02: use commmon add interface for mt76x2u a80acaf mt76x02: initialize mutli bss mode when set up address 38e832d mt76x02: minor beaconing init changes 171adaf mt76x02: init beacon config for mt76x2u dcab682 mt76: beaconing fixes for USB ff81de1 mt76x02: enable support for IBSS and MESH 8027b5d mt7603: remove copyright headers e747e80 mt76: fix software encryption issues 2afa0d7 mt7603: remove WCID override for software encrypted frames Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2019-01-301-3/+3
| | | | | | | | | | | | | | c3da1aa mt7603: trigger beacon stuck detection faster 7a53138 mt7603: trigger watchdog reset if flushing CAB queue fails 6eef33b mt7603: remove mt7603_txq_init ae30c30 mt76: add driver callback for when a sta is associated 0db925f mt7603: update HT/VHT capabilities after assoc b5ac8e4 mt7603: initialize LED callbacks only if CONFIG_MT76_LEDS is set c989bac mt76x0: eeprom: fix chan_vs_power map in mt76x0_get_power_info 24bd2c0 mt76x0: phy: report target_power in debugfs bc7ce2a mt76x0: init: introduce mt76x0_init_txpower routine Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2019-01-251-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | d273ddd mt7603: fix number of frames limit in .release_buffered_frames 63bf183 mt76: add channel switch announcement support e45db12 mt7603: fix tx status info 9d11596 mt7603: discard bogus tx status data 4bcb2f9 mt7603: fix txd q_idx field value 4206db7 mt76: set IEEE80211_HW_NEEDS_UNIQUE_STA_ADDR flag c4e4982 mt7603: set IEEE80211_HW_TX_STATUS_NO_AMPDU_LEN 702f557 mt7603: use maximum tx count for buffered multicast packets 158529d mt7603: fix PSE reset retry sequence fc31457 mt7603: implement support for SMPS 3e9a7d5 Revert "mt7603: fix txd q_idx field value" 815fd03 mt7603: fix CCA timing values b35cc8e mt7603: set timing on channel change before starting MAC 79b337c mt7603: move CF-End rate update to mt7603_mac_set_timing 3df341d mt7603: avoid redundant MAC timing updates 1c751f3 mt76: avoid scheduling tx queues for powersave stations 2efa389 mt7603: limit station power save queue length to 64 63a79ff mt76: do not report out-of-range rx nss fe30bd3 mt7603: issue PSE reset on tx hang ce8cc5d mt7603: issue PSE client reset on init e342cc5 mt7603: fix buffered multicast count register aa470d8 mt7603: fix buffered multicast queue flush b4ee01f mt76: fix tx status timeout processing 7d00d58 mt76x02: fix per-chain signal strength reporting 64abb35 mt76: fix corrupted software generated tx CCMP PN 0b939dc mt76: fix resetting software IV flag on key delete Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kmod-sched-cake: bump to latest cakeKevin Darbyshire-Bryant2019-01-161-3/+3
| | | | | | | | | | | 331ac70 Correctly update parent qlen when splitting GSO packets 581967c Makefile: Hook into Kbuild/Kconfig infrastructure The parent qlen change is potentially relevant for us, the makefile is a no-op. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 55e0a7131a4b6e98d7cd623727f8ac5c4702b60d)
* mt76: update to the latest versionFelix Fietkau2019-01-141-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 6745830 mt76: fix race condition in station removal 7e5c819 mt76: add mt76_sta_remove helper 75aa36e mt7603: use wcid/wcid_mask from struct mt76_dev fd85ff9 mt7603: use mt76_sta_remove helper 0848d2d mt7603: simplify mt7603_mcu_msg_send, remove skb_ret handling 83a80ca mt76: request tx status for powersave released EOSP packet df5c797 mt76: fix uninitialized mutex access setting rts threshold 0bfa98e mt76: introduce mt76x02_config_mac_addr_list routine 4248446 mt76x0: pci: enable VHT rates in IBSS mode f75efd8 mt76x2u: phy: add TX_SHAPING calibration c1d67b4 mt76x2u: phy: run phy_channel_calibrate after channel switch 9fe0fe8 mt76x2u: main: use mt76x02_bss_info_changed utility routine 3fc95d7 mt76x2u: init: remove mt76x2u_init_beacon_offsets routine 88f6883 mt76: remove wait argument from mt76x02_mcu_calibrate 009ab91 mt76: clean up more unused EXPORT_SYMBOLs 963768d mt76x02: fix regression in tx station race condition fix d7788cc mt76: mt76x02: make group_wcid the first member in struct mt76x02_vif e65ad4c mt7603: make group_wcid the first member in struct mt7603_vif 7b1373e mt76: mt76x02: remove mt76x02_txq_init a97127b mt76: replace sta_add/remove ops with common sta_state function 13f1e82 mt7603: clear wtbl entry for removed stations 90e2c1b mt7603: add mt7603_wtbl_set_skip_tx, change mt7603_wtbl_set_ps users 41931e4 mt7603: toggle skip_tx on station add/remove d0fdf01 mt7603: avoid unnecessary wtbl writes for ps-filter 96b3b3d mt76x2u: main: fix typo setting sta_state mac80211 callback 471d397 mt7603: fix priority for buffered multicast packets 3873e82 mt7603: fix MT_BMAP_0/MT_GROUP_THD_0 register initializion for mt7628 749d5c3 mt7603: fix reserved page handling for mt7628 d22799b mt7603: reduce reserved pages for beacons 42c5281 mt7603: fix maximum frame size in scheduler init fa7335b mt76: fix potential NULL pointer dereference in mt76_stop_tx_queues 84aa12a mt76: fix potential null pointer deref in mt76_sta_add 7c4c33c mt7603: skip efuse tx power data for mt7628 ca2c875 mt7603: add support for accessing remapped registers via ops b44d793 mt7603: clear PSE redirections before MCU init 82363ab mt7603: move tx status to rx queue 0 c09e8a4 mt7603: fix buffering of tx packets for powersave clients 4734108 mt7603: use mt7603_wtbl_clear on station removal 9428e34 mt7603: fix watchdog reset sequence b3f82a3 mt7603: report PSE reset failures via debugfs a301dec mt7603: add back PSE client reset code 94cebfc mt7603: fix handling lost interrupt events during watchdog reset b38fe7d mt7603: only issue PSE reset on PSE stuck da666a7 mt7603: issue PSE reset if firmware debug register indicates stuck queues 5fb60a7 mt7603: fix aggregation size handling 31cd20e mt7603: issue PSE reset on stuck beacon 4063ae1 mt7603: check for PSE hang / stuck beacon first 00e03b9 mt7603: fix MT_WF_PHY_CR_RXTD_BASE definition c3efb5d mt7603: add support for detecting MT7688 and single stream devices 2a136cb mt7603: fix TKIP key setup cd456ca mt7603: disable broken support for WEP hardware encryption 3ecb7f8 mt7603: fix hardware queue assignment 6ac9653 mt7603: fix CAB queue limits d22feb0 mt7603: move cab queue enabling to pre-tbtt tasklet 44bb372 mt7603: fix CAB queue flush mask 5a5b396 mt76: throttle transmission of buffered multicast packets 8084323 mt7603: implement code for adjusting energy detect CCA thresholds 8929a6e mt7603: increase MCU timeout f2ba65f mt7603: update firmware to 20161027164355 0ad998b mt7603: increase aggregation limits (based on vendor driver changes) da00af0 mt7603: clear bit 18 in MT_SEC_SCR to fix ICV error 417ab77 mt7603: improve recovery from PSE reset failure fea7ad8 mt76: move mt76x02_phy_get_min_avg_rssi to mt76 core 9d009be mt7603: add dynamic sensitivity tuning based on false CCA events 2c8e9ac mt7603: initialize channel maximum power from eeprom data b2cc29b mt76: move mt76x02_get_txpower to mt76 core 6203d46 mt7603: add support for setting transmit power 294e095 mt7603: reset DMA scheduler on MT7628 8178f0d mt7603: apply efuse data only when it exists e67e551 mt76: dma: remove napi from mt76_dma_rx_fill signature 0490bd2 mt76: usb: do not build the skb if reported len does not fit in buf_size eb076ae mt76: Add missing include of linux/module.h 1d2819e mt76: fix typo in mt76x02_check_mac_err routine 9c9fae3 mt76: mac: run mt76x02_mac_work routine atomically 6be90b6 mt76: usb: avoid queue/status spinlocks while passing tx status to mac80211 40dad32 mt76x0: pci: fix ACS support d94e9c4 mt76x02: do not set protection on set_rts_threshold callback 0d83d73 mt76x02: fixup MT_PROT_RATE_* defines 628f8d7 mt76x02: set protection according to ht operation element f7d8c17 mt76x0: configure MT_VHT_HT_FBK_CFG1 10f57cf mt76x2: add static qualifier to mt76x2_init_hardware 37b2ad3 mt76: dfs: run mt76x02_dfs_set_domain atomically 51b6daf mt76x2: init: set default value for MT_TX_LINK_CFG 9661da4 mt76: add energy detect CCA support to mt76x{0,2}e drivers 876d0e9 mt76: mac: minor optimizations in mt76x02_mac_tx_rate_val c78e317 mt76: dma: do not build skb if reported len does not fit in buf_size 3598046 mt76: mmio: introduce mt76x02_check_tx_hang watchdog 58988a3 mt76: fix signedness of rx status signal field bce700d mt7603: fix signal strength reporting on single-stream devices 148219d mt7603: fix checkpatch issues 2a092e2 mt7603: fix per-rate retry accounting 962152b mt7603: fix WMM TXOP limit configuration 24ec040 mt7603: fix BSSID configuration in AP mode 48fb011 mt7603: fix CF-End transmit rate when 11b stations are connected 9daa5ff mt76: make const array 'data' static, shrinks object size 7d4a95c mt76: dma: avoid indirect call in mt76_dma_tx_queue_skb f84b008 mt76: fix tx status reporting for non-probing frames 8167074 Revert "mt7603: update firmware to 20161027164355" 2ad54b2 mt76: move wcid rssi ewma init to mt76 core d77c861 mt76: fix rssi ewma tracking eca96cd mt76: use proper name for __MT76x02_H macro d1bc504 mt76: fix building without CONFIG_LEDS_CLASS a946b78 mt76: add led support to mt76x0e driver Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: brcmfmac: backport firmware loading changes & fix memory bugsRafał Miłecki2019-01-088-15/+620
| | | | | | | | | | | | | | | | This pick most of brcmfmac changes backported into the master in commits 5932eb690f24 ("mac80211: brcmfmac: backport firmware loading cleanup") 3eab6b8275b2 ("mac80211: brcmfmac: backport NVRAM loading improvements") 529c95cc15dc ("mac80211: brcmfmac: fix use-after-free & possible NULL pointer dereference") It's more than would be normally backported into a stable branch but it seems required. Firmware loading cleanups are needed to allow fix memory bugs in a reliable way. Memory fixes are really important to avoid corrupting memory and risking a NULL pointer dereference. Hopefully this stuff has received enough testing in the master. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* brcm2708-gpu-fw: update to git HEADStijn Tintel2018-12-271-7/+7
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 42ca32ad2ffc2fcd22878173eba011962d369c50)
* mwlwifi: update to version 10.3.8.0-20181114Kabuli Chana2018-12-181-3/+3
| | | | | | | compile / test target mvebu / mamba Signed-off-by: Kabuli Chana <newtownBuild@gmail.com> (backported from 392eea392cdae42d4e388e9f1a89bb6fb4e849b6)
* mwlwifi: update to version 10.3.8.0-20181029Kabuli Chana2018-12-181-3/+3
| | | | | | | compile / test target mvebu / mamba Signed-off-by: Kabuli Chana <newtownBuild@gmail.com> (backported from 390158bd2b0bab61e3c454a006fa68a4ad98dfdc)
* mwlwifi: driver version to 10.3.8.0-20181022Jonathan Lancett2018-12-181-3/+3
| | | | | | | | | | | | | Upgrade 88W8997 firmware to 8.4.0.52. Removed unnecessary firmware settings. Added vendor events. Fixed crash problem when module is removed. Modified the code to protect tx queues. Signed-off-by: Jonathan Lancett <j.lancett@ntlworld.com> [tidy commit message] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (backported from 9ac73502405b4d4f110e4901df7d05b7f7bcd781)
* mwlwifi: driver version to 10.3.8.0-20181008Yufei Miao2018-12-181-3/+3
| | | | | Signed-off-by: Yufei Miao <myf@myf.cloud> (backported from 260be8a5790416a8e8e42eb59d5b24a656e4bedb)
* kernel: Add missing config option for NFSDv4Hauke Mehrtens2018-12-181-0/+1
| | | | | | | | | This configuration option is not set when building the layerscape/armv8_64b target. Fixes: 92aa21497b2 ("kernel: build support for NFSv4 in nfsd") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (backported from 99e1a12fd0448bc045da7f3776e804df187ee7a2)
* kernel: build support for NFSv4 in nfsdW. Michael Petullo2018-12-181-1/+5
| | | | | Signed-off-by: W. Michael Petullo <mike@flyn.org> (backported from 92aa21497b22bcf03862cf9da8e89ef007affebd)
* kernel: add missing dependency to regmap to kmod-gpio-mcp23s08Hauke Mehrtens2018-12-181-1/+1
| | | | | | | | This fixes a build problem recently introduced. Fixes: a904003b9b5f ("kernel: fix kmod-gpio-mcp23s08 for linux 4.14") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (backported from e882e63f1e1169030389b304489ab8a7d785df33)
* mwlwifi: driver version to 10.3.8.0-20180920Jonathan Lancett2018-12-181-3/+3
| | | | | | | Signed-off-by: Jonathan Lancett <j.lancett@ntlworld.com> [minor tweak to commit title] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (backported from 95b3f8ec8d4d27525c8eb016b70290d380c55d0a)
* kernel: add kmod-tcp-bbrKeith Wong2018-12-183-0/+40
| | | | | | | | | | | | | This adds support for BBR (Bottleneck Bandwidth and RTT) TCP congestion control. Applications (e.g. webservers, VPN client/server) which initiate connections from router side can benefit from this. This provide an easier way for users to use BBR by selecting / installing kmod-tcp-bbr instead of altering kernel config and compiling firmware by themselves. Signed-off-by: Keith Wong <keithwky@gmail.com> (backported from 79c233daa4caee1a8af0c7a91e1d4aee96d410e9)
* kernel: fix kmod-gpio-mcp23s08 for linux 4.14Martin Schiller2018-12-181-3/+7
| | | | | Signed-off-by: Martin Schiller <ms@dev.tdt.de> (backported from a904003b9b5fe2744ee5d5d8718c54d001f1c93e)
* mwlwifi: Update to 10.3.8.0-20180810Daniel Engberg2018-12-181-3/+3
| | | | | | | Update mwlwifi to 10.3.8.0-20180810 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> (backported from e1a1add5178b6a943c6272776ba3af06b3f953a8)
* kernel: package x86-optimized crypto-misc modulesDaniel Gimpelevich2018-12-181-2/+50
| | | | | | | | | | | | | Some of the modules in the crypto-misc package have alternate implementations optimized for different x86 instruction set extensions, but only one of these was built for this package until now: twofish-i586.ko Tested with insmod, on both x86 and x86_64. The modules now have an autoload, which they previous didn't, loading the dependencies in the correct order. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> (backported from c762817c9211f439c5da6ea30b6ed828c9861c4f)
* include: add netdev family support for nftablesRosy Song2018-12-181-0/+20
| | | | | Signed-off-by: Rosy Song <rosysong@rosinson.com> (backported from b4d4e4ceb56825033dd4c8e401e9250ae5042a99)
* brcm2708: Update brcm2708-gpu-fw packageChristo Nedev2018-12-181-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem - rapsberry pi 3 b/b+ does not boot with bcm2710 images! How Raspberry Pi boots Actualy? When Raspberry is switched on GPU is activated. 1. GPU execute First stage bootloader from ROM. First stage bootloader mount the FAT boot partition on the SD card and execute second stage bootloader (bootcode.bin). 2. Second stage bootloader (bootcode.bin) activate SDRAM. Load the GPU firmware (start.elf). 3. GPU firmware (start.elf) a) display Rainbow splash. b) read firmware configuration file config.txt and split the RAM using fixup.dat. c) loads a cmdline.txt d) enables the CPU. e) loads the kernel image configurable via config.txt In your target/linux/brcm2708/image/config.txt 493 ## kernel (string) 494 ## Alternative name to use when loading kernel. 495 ## 496 #kernel="" it is not configured! But in your target/linux/brcm2708/image/Makefile 75 KERNEL_IMG := kernel8.img 76 DEVICE_TITLE := Raspberry Pi 3B/3B+ you have kernel8.img GPU Firmware search order by default for a PI 3 is: kernel8.img if found boot in 64 bit mode kernel8-32.img if found boot in 32 bit mode kernel7.img if found boot in 32 bit mode kernel.img if found boot in 32 bit mode But a PI 2 will start the search from kernel7.img and a PI 1 only looks for kernel.img. Оbviously the kernel has been found. But something goes wrong and the device is restarted. In your package/kernel/brcm2708-gpu-fw/Makefile 11 PKG_NAME:=brcm2708-gpu-fw 12 PKG_VERSION:=2017-08-08 13 PKG_RELEASE:=e7ba7ab135f5a68b2c00a919ea9ac8d5528a5d5b boot loader is 10 monts old. In conclusion, the best way to solve the problem is to update the boot loader! Fixup_cd.dat and start_cd.elf files are not necessary. These are used when GPU memory is set to 16 MB, which disables some GPU features. I did not remove them just in case! cheers Signed-off-by: Christo Nedev <christo.nedev@gmail.com> (backported from c335649629e641209a3539209defffeea090ad8f)
* netfilter: add bpf match supportAlin Nastac2018-12-181-0/+1
| | | | | | | | | | Add xt_bpf modules to {kmod-ipt,iptables-mod}-filter. Match using Linux Socket Filter. Expects a BPF program in decimal format. This is the format generated by the nfbpf_compile utility. Signed-off-by: Alin Nastac <alin.nastac@gmail.com> (backported from ab07ae2f27dd920cb7ba186d9f7ad2ccb1c980c4)
* kernel: merge kmod-fbcon with kmod-fbTomasz Maciej Nowak2018-12-181-36/+14
| | | | | | | | | | | | | | As of commit in kernel: 6104c37094 fbcon: Make fbcon a built-time depency for fbdev framebuffer console is build in into framebuffer module and there's no standalone fbcon module. Therefore drop the kmod-fbcon and enable console in kmod-fb. The only targets which use these modules are imx6 and geode, both are on kernel 4.14 so no fallback for other kernels is introduced. Being at that this commit also fixes autoload of fbdev for x86. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl> (backported from 9c0ddafd4663948fe5c6f3f4a7a7601fdbb36737)
* mac80211: fix spurious disconnections with powersave clientsFelix Fietkau2018-11-131-0/+26
| | | | | | Affects all drivers using ieee80211_tx_status_noskb, e.g. ath9k and mt76 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version, sync with masterFelix Fietkau2018-11-131-10/+147
| | | | | | | | - adds new drivers for mt76x2u, mt76x0u and mt76x0e - adds back fixed version of the tx status fixes - improves mt7603e stability Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: brcmfmac: add 2 more recent changesRafał Miłecki2018-11-093-0/+112
| | | | | | | | | | First one is a fix for reporting channels to the user space. Important for users as they could try setting invalid channel and fail to start an interface. Later is a support for newer FullMAC chipset firmwares. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: backport firmware_request_nowarn and firmware_request_cacheFelix Fietkau2018-11-091-0/+19
| | | | | | Required for an mt76 update to the latest version from master Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: backport and include linux/overflow.hFelix Fietkau2018-11-091-0/+322
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport sg_init_marker()Felix Fietkau2018-11-091-0/+30
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: brcmutil: backport chanspec debugging patchRafał Miłecki2018-11-071-0/+83
| | | | | | It helps debugging possible WARN-ings. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: brcmfmac: backport the latest 4.20 changesRafał Miłecki2018-11-074-0/+244
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit b50f162b3cce3d95874e4394f4765413f58765f1)
* mac80211: brcmfmac: rename 4.20 backport patchesRafał Miłecki2018-11-074-0/+0
| | | | | | | Include kernel version to help tracking changes. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit f7a3459ab9c4d8f5102c8ae0861ca481571703f7)
* mac80211: add iw command wrapper with error loggingRafał Miłecki2018-11-071-0/+4
| | | | | | | | | | | | | | | | | | | | | | Currently it's close to impossible to tell what part of mac80211 setup went wrong. Errors logged into system log look like this: radio0 (6155): command failed: No error information (-524) radio0 (6155): command failed: Not supported (-95) radio0 (6155): command failed: I/O error (-5) radio0 (6155): command failed: Too many open files in system (-23) With this commit change it's getting clear: command failed: No error information (-524) Failed command: iw dev wlan0 del command failed: Not supported (-95) Failed command: iw phy phy0 set antenna_gain 0 command failed: I/O error (-5) Failed command: iw phy phy0 set distance 0 command failed: Too many open files in system (-23) Failed command: iw phy phy0 interface add wlan0 type __ap Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit ffa80bf5a784a34b81e32144669f30560780bdb6)
* ath9k: fix dynack in IBSS modeKoen Vandeputte2018-11-065-0/+309
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, dynack was only tested upstream using AP/STA mode. Testing it on IBSS, showed that late-ack detection was broken. This is caused due to dynack using Association Request/Response frames for late-ack detection, which IBSS does not use. Also allowing Authentication frames here solves this. A second issue also got fixed, which was also seen AP/STA mode: When a station was added, the estimated value would be exponentially averaged using 0 as a starting point. This means that on larger distances, the ack timeout was still not high enough before synchronizing would run out of late-ack's for estimation. Fix this by using the initial estimated value as a baseline and only start averaging in the following estimation rounds. Test setup: - 2x identical devices: RB912UAG-5HPnD + 19dB sector - IBSS - 2x2 802.11an (ar9340), HT20, long GI - RSSI's -70 / -71 - Real distance: 23910 meter Results (60s iperf runs): Fixed coverage class 54 (up to 24300m): * 21.5 Mbits/sec Dynack: * 28.9 Mbits/sec Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* Revert "mt76: update to the latest version"Felix Fietkau2018-11-011-3/+3
| | | | | | | | | | | | This reverts the following commits: 24ca1cda38fbc3c5ae1302e44ea9dba20cf01ea0 79989634289b25a09a533fb97b26e34cc7e81ea1 The update was reported to cause stability issues. Revert until those are resolved Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-10-271-3/+3
| | | | | | 71b7a4a mt76: fix regression in tx status handling Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-10-261-3/+3
| | | | | | | | | 199d6bf mt76x2: skip station tx status for non-sta wcid entries d83ac6e mt76: only override control->sta on sw-encrypted tx 23abe5d mt76: add support for reporting tx status with skb f8ce59e mt7603: use common tx status handling code Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix A-MSDU packet handling with TCP retransmissionFelix Fietkau2018-10-111-0/+31
| | | | | | | Improves local TCP throughput and fixes use-after-free bugs that could lead to crashes. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netfilter: add missing dependency for kernel 4.14Koen Vandeputte2018-10-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since kernel 4.14.75 commit ("netfilter: xt_cluster: add dependency on conntrack module") a dependency is required on kmod-nf-conntrack. It seems this was already present for kmod-ipt-clusterip but not yet for kmod-ipt-cluster Add it fixing a build error when including kmod-ipt-cluster: Package kmod-ipt-cluster is missing dependencies for the following libraries: nf_conntrack.ko modules/netfilter.mk:665: recipe for target '/mnt/ramdisk/koen/firmware/builds/openwrt/bin/targets/cns3xxx/generic/packages/kmod-ipt-cluster_4.14.75-1_arm_mpcore_vfp.ipk' failed make[3]: *** [/mnt/ramdisk/koen/firmware/builds/openwrt/bin/targets/cns3xxx/generic/packages/kmod-ipt-cluster_4.14.75-1_arm_mpcore_vfp.ipk] Error 1 make[3]: Leaving directory '/mnt/ramdisk/koen/firmware/builds/openwrt/package/kernel/linux' Command exited with non-zero status 2 time: package/kernel/linux/compile#1.80#0.05#2.07 package/Makefile:107: recipe for target 'package/kernel/linux/compile' failed make[2]: *** [package/kernel/linux/compile] Error 2 make[2]: Leaving directory '/mnt/ramdisk/koen/firmware/builds/openwrt' package/Makefile:103: recipe for target '/mnt/ramdisk/koen/firmware/builds/openwrt/staging_dir/target-arm_mpcore+vfp_musl_eabi/stamp/.package_compile' failed make[1]: *** [/mnt/ramdisk/koen/firmware/builds/openwrt/staging_dir/target-arm_mpcore+vfp_musl_eabi/stamp/.package_compile] Error 2 make[1]: Leaving directory '/mnt/ramdisk/koen/firmware/builds/openwrt' /mnt/ramdisk/koen/firmware/builds/openwrt/include/toplevel.mk:216: recipe for target 'world' failed make: *** [world] Error 2 Fixes: bba743458eb4 ("kernel: bump 4.14 to 4.14.75") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v4.14.75&id=b969656b46626a674232c0eadf92a394b89df07c
* kmod-sched-cake: bump to 20181002Kevin Darbyshire-Bryant2018-10-022-26/+4
| | | | | | | | | Revert "Add workaround for wrong skb->mac_len values after splitting GSO" Remove our local patch which did the same thing. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 885052fbfb0ea5ee49e6abc6878ae99ee011688b)
* kmod-sched-cake: don't gso fixup on fixed kernelsKevin Darbyshire-Bryant2018-10-022-1/+23
| | | | | | | | | Kernels 4.14.73 & 4.9.140 include the gso fixup fix, so cake doesn't need to do it. Let's not waste cpu cycles by doing it in cake which could be really important on cpu constrained devices. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit b47614f9f18c7d1c24104ef1d53c8d1ac8920ba4)
* mt76: update to the latest version, fixes mt76x2 beacon issueFelix Fietkau2018-10-011-3/+3
| | | | | | 53e1110 mt76: mt76x2: fix multi-interface beacon configuration Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix management frame protection issue with mt76 (and possibly ↵Felix Fietkau2018-09-291-0/+25
| | | | | | | | | other drivers) Software crypto wasn't working for management frames because the flag indicating management frame crypto was missing Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version from the 18.06 branchFelix Fietkau2018-09-291-3/+3
| | | | | | | | 497c304 mt7603: fix wcid for frames sent via drv_tx 27af7a5 mt76: fix handling ps-poll frames c3dba28 mt76: check aggregation sequence number for frames sent via drv_tx Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix tx queue allocation for active monitor interfacesFelix Fietkau2018-09-221-0/+26
| | | | | | Fixes a crash with drivers like ath9k Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: fix tx power issue for mt76x2Felix Fietkau2018-09-221-3/+3
| | | | | | 6e1898d mt76x2: fix tx power configuration for VHT mcs 9 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport upstream fixesKoen Vandeputte2018-09-2116-55/+702
| | | | | | | | | | | Backport most significant upstream fixes (excl. hwsim fixes) Refreshed all patches. Contains important fixes for CSA (Channel Switch Announcement) and A-MSDU frames. [slightly altered to apply cleanly] Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath9k: fix unloading the moduleFelix Fietkau2018-09-202-15/+10
| | | | | | | | | Registering a GPIO chip with the ath9k device as parent prevents unload, because the gpiochip core increases the module use count. Unfortunately, the only way to avoid this at the moment seems to be to register the GPIO chip without a parent device Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kmod-sched-cake: fix 6in4/gso performance issueKevin Darbyshire-Bryant2018-09-121-3/+3
| | | | | | | | | Bump to latest upstream cake: Add workaround for wrong skb->mac_len values after splitting GSO Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 66fd41ba79356b1b776ba29dd8191039abc23061)
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-08 05:39:24 +0000