| Commit message (Collapse) | Author | Age | Files | Lines |
... | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
d033272 mt76: mt76x0: handle chip specific initval differences
1a2b2dc mt76: usb: fix static tracepoints
11151f4 mt76x0: antenna select corrections
dade109 mt76x0: init: simplify mt76x0_init_mac_registers
3c54612 mt76x0: pci: add missing MODULE_FIRMWARE macro
97e0269 mt76x0: mac: remove mt76x0_mac_set_ampdu_factor
5d8c4bf mt76x0: align mt76x0u and mt76x0e fw version
d4391ae mt76: move mt76x02_mac_set_short_preamble in mt76x02_mac.c
aa6ebf9 mt76: move mt76x02_init_device in mt76x02-lib module
a4a08c3 mt76: move mac beacon routines in mt76x02-lib module
6b69650 mt76: move tx beacon routines in mt76x02-lib module
8486047 mt76x0: pci: add pre_tbtt_tasklet support
acd4c99 mt76: move mt76x02_sw_scan and mt76x02_sw_scan_complete in mt76x02-lib module
2d736cf mt76: move mt76x02_get_txpower in mt76x02_util.c
aa1d6bd mt76: move mt76x02_sta_ps in mt76x02-lib module
e684281 mt76: introduce mt76x02_init_beacon_config routine
c181d97 mt76x0: pci: enable AP support
3b86d99 mt76: move mt76x02_set_tx_ackto in mt76x02-lib module
41d7ef7 mt76x0: update init vals for MT_TX_PROT registers
fe5a149 mt76: move tx protection routines in mt76x02-lib module
5bca2de mt76: move mt76x02_bss_info_changed in mt76x02-lib module
d21a835 mt76: move dfs support in mt76x02-lib module
ba9d424 mt76x0: pci: add DFS support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
|
|
| |
b51337a mt76: clean up unused leftover EXPORT_SYMBOLs
383b228 mt76x0: reduce duplication in setting rf bandwidth parameters
a1a4528 mt76: mt76x0: handle chip specific initval differences
f473340 mt76: usb: fix static tracepoints
3a975b4 mt76x0: antenna select corrections
37c1150 mt76x0: init: simplify mt76x0_init_mac_registers
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
96fa353 mt76: do not store aggregation sequence number for null-data frames
c50dca8 mt76x0: print BBP version only for debug
ddc9e05 mt76x0: correct RF access via RF_CSR register.
02d2385 mt76: allow to identify bus
c438e67 mt76x0: correct RF reg pairs write for PCIe
c83abb8 mt76x0: use bus helper to identify rf access method
9c272ff mt76x0: phy: fix bank check in mt76x0_rf_csr_{wr,rr}
1945d57 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mcu.c
214eab7 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_phy.c
29bc2ae mt76: use mt76x02_dev instead of mt76_dev in mt76x02_util.c
08ecb5f mt76: use mt76x02_dev instead of mt76_dev in mt76x02_usb_mcu.c
fd9b2b0 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mac.c
f37bd25 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_txrx.c
48950cb mt76: use mt76x02_dev instead of mt76_dev in mt76x02_eeprom.c
06276cc mt76x0: pci: report firmware version using ethtool
72546ed mt76x0: pci: add missing mac80211 callbacks
4de98cd mt76: disable ldpc coding for mt76x0 devices
f0951c2 mt76x0: pci: add mt76x0_register_device in mt76x0e_register_device
4f3685e mt76: reserve enough room for USB tx skbs
5e6907f mt76x0: remove dma.h
acfc5a9 mt76x0: pci: fix set external PA I/O current
2b79bb7 mt76: mt76x0e: another fix for the external PA current setting
8a0acfd mt76x0: phy: fix restore phase in mt76x0_phy_recalibrate_after_assoc
e9e949b mt76x0: phy: remove channel parameter from mt76x0_phy_set_chan_bbp_params
1775717 mt76: move mt76x02_phy_set_bw in mt76x02-lib module
f82134f mt76: move mt76x02_phy_set_band in mt76x02-lib module
3eaa34f mt76x0: pci: rename mt76x0_phy_calibrate
7269fb4 mt76x0: pci: introduce mt76x0_phy_calirate routine
a514b75 mt76x0: phy: update set_channel for mt76x0e devices
62a1bc5 mt76x0: eeprom: introduce mt76x0_tssi_enabled routine
a48481d mt76x0: phy: add phy/vco temperature compensation
cc34ce9 mt76: move rssi_gain_thresh routines in mt76x02-lib module
eaf9751 mt76: move mt76x02_phy_adjust_vga_gain in mt76/mt76x02_phy.c
2715e7c mt76: introduce mt76x02_init_agc_gain routine
87fcb31 mt76x0: phy: align channel gain logic to mt76x2 one
98f8ef7 mt76x0: phy: do not run calibration during channel switch
cf859ad mt76x2: align mt76x2 and mt76x2u firmware
1f3f767 mt76x2u: align channel gain logic to mt76x2 one
d1c1454 treewide: Replace more open-coded allocation size multiplications
bcbecd2 mt76x0: phy: use proper name convention
b6694e6 mt76x0: phy: simplify rf configuration routines
da129c9 mt76x0: phy: improve code readability in initvals_phy.h
eab7ab1 mt76x0: pci: add get_survey support
9e493f7 mt76: move mt76x02_mac_work routine in mt76x02-lib module
ecec6ba mt76: move mt76x02_debugfs in mt76x02-lib module
4f3b608 mt76x0: use shared debugfs implementation
6aae25b mt76x0: use mt76x02_mac_work as stats handler
b228a45 mt76x2u: introduce mac workqueue support
4671af4 mt76x0: phy: unify calibration between mt76x0u and mt76x0e
5ed28f3 mt76x0: do not perform MCU calibration for MT7630
9b844da add mt7610e firmware
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
| |
USB and PCIe devices can run the same firmware
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
| |
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
| |
- make kmod-mt76-core hidden
- select kmod-mt76-core and kmod-usb-core from mt76-usb
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
053de5c mt76x0: pci: add mt76x0e_cleanup routine
c6b1926 mt76x2: move mt76x2 source files to mt76x2 folder
6afb1b8 mt76: fix header guard macro define names
05c7f24 mt76: fix frag length allocation for usb
6856ef6 mt76: usb: fix hw initialization sequence
3d43146 mt76x0: usb: stop cal/mac workqueues at hw stop
bef08cc mt76: move mt76x02_tx_get_max_txpwr_adj in mt76x02_util.c
cd42111 mt76: add get_tx_txpwr_adj function pointer to mt76_driver_ops
c49a3ae mt76: move mt76x02_mac_write_txwi in mt76x02-lib module
4bae980 mt76: usb: use mt76x02u_tx_prepare_skb to fill txwi
e0847b4 mt76x0: init: remove unnecessary configurations
e802b5c mt76: move mt76x02_phy_get_min_avg_rssi in mt76x02_phy.c
2742847 mt76: move mt76x02_rx_get_sta and mt76x02_rx_get_sta_wcid in mt76x02_util.h
c26f9fd mt76x0: mac: use sta ewma estimation for rssi tracking
330fbe3 mt76x0: remove unused variable in mt76x0_dev
a56efc5 mt76x0: remove hw_atomic_mutex mutex in mt76x0_dev
abd1daa mt76x2: move mt76x2_dev in mt76x02_util.h
d5d1e59 mt76x0: merge mt76x0_dev in mt76x02_dev
e236ba5 mt76: move mt76x02_mac_process_rx in mt76x02-lib module
724d547 mt76: unify rxwi parsing between mt76x2 and mt76x0 drivers
ec3d829 mt76: move mt76x02_tx in mt76x02-lib module
159f767 mt76: move txrx shared routines in mt76x02_txrx.c
9c874cd mt76: rename mt76x02_util.h in mt76x02.h
fd9174f mt76x2: remove leftover function declatarions
608708a mt76: move tpc routines in mt76x02-lib module
45b8f5e mt76: move mt76x02_tx_prepare_skb in mt76x02_txrx.c
9a39521 mt76: usb: move mt76x02u_tx_complete_skb in mt76x02_usb_core.c
3770c54 mt76: move mt76x02_mac_poll_tx_status in mt76x02-lib moudle
9730290 mt76: move mt76x02_tx_complete in mt76x02-lib module
99e0486 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mmio.c
3d2cfe3 mt76: move tx_tasklet management in mt76x02-lib moudle
e61671e mt76: move irq handler in mt76x02-lib moudle
d533f13 mt76x0: pci: report firmware version using ethtool
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
| |
94d4445 mt76: mt76x2: fix multi-interface beacon configuration
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
powersave issue
d220f43 Revert "mt76x2: reset HW before probe"
0853d79 Revert "mt76x2: add functions for setting extended MAC address registers"
8ba17b1 Revert "mt76: use a per rx queue page fragment cache"
3f0ac35 mt76x2: init: disable APCLI by default
38014de mt76x2: remove unnecessary break in mt76x2_mac_process_tx_rate()
fbf4791 mt76x2: fix TXD_INFO bitmask definition
d00c616 mt76x2: fix mrr idx/count estimation in mt76x2_mac_fill_tx_status()
0d42d22 mt76: introduce mt76_{incr,decr} utility routines
0f6379a mt76x2: dfs: add sw event ring buffer
df8071f mt76x2: dfs: add sw pattern detector
016df9c mt76x2: debugfs: add sw pulse statistics to dfs debugfs
a6915cb mt76: move MT_TXD_INFO, MT_MCU_MSG and MT_RX_FCE_INFO defs in dma.h
911e6aa mt76x2: move mt76x2_fw_header and mt76x2_patch_header definitions in mcu.h
c55d29b mt76x2: move utility routines in mt76x2.h
d08ea82 mt76x2: introduce mt76x2_init_device routine
6a1e809 mt76x2: move interface_modes definition in mt76x2_init
5aa0972 mt76x2: introduce mt76x2_mac_load_tx_status routine
730b86c mt76x2: add napi struct to mt76_rx_poll_complete/mt76_rx_complete signatures
1ab6cea mt76x2: add buffer len to mt76x2_mac_write_txwi signature
7ac6dac mt76: rename mt76_tx_queue_skb in mt76_dma_tx_queue_skb
66f3949 mt76: introduce tx_queue_skb function pointer in mt76_bus_ops
d099694 mt76: introduce mt76x2-common module
9bf1aa1 mt76: add mt76x2_tx_common to mt76x2-common module
29f960a mt76: add mt76x2_mac_common to mt76x2-common module
8f568ce mt76: add mt76x2_init_common to mt76x2-common module
61c4c61 mt76: add mt76x2_common to mt76x2-common module
264edbe mt76: add mt76x2_phy_common to mt76x2-common module
7625508 mt76: move mt76x2_debugfs in mt76-common module
99a3afa mt76: add usb support to mt76 layer
25b4598 mt76: add driver code for MT76x2u based devices
253c443 mt76x0: core files
6ed7bc2 mt76x0: mac files
a2c1068 mt76x0: usb files
c332481 mt76x0: mcu files
0d7d9ed mt76x0: phy files
5d50834 mt76x0: init files
c633654 mt76x0: eeprom files
18a9d4e mt76x0: trace and debugfs files
7395bba mt76x0: dma and tx files
08dec4c mt76x0: main file
5892efd mt76: add more states
e176af8 mt76: Kconfig and Makefile for mt76x0 driver
5c38d48 mt76x0: disable HW before probe
2f37f60 mt76x0: load firmware from mediatek subdir
1388140 mt76x0: rename mt76_* functions
1cb65d5 mt76x0: rename trace symbols
4fe2b16 mt76x0: correct type for eeprom gain value
560b643 mt76x0: perform mt76x0_mac_set_ampdu_factor
d1645aa mt76x0: Remove VLA usage
f8a0da4 mt76: Fix comparisons with invalid hardware key index
884eca5 mt76: unify wait_for_mac
fc636f0 mt76: rename mt76x2_regs.h
493feb9 mt76: merge mt76x0/regs.h into mt76x02_regs.h
a238099 mt76: create new mt76x02-lib module for common mt76x{0,2} code
55bceee mt76: unify mac_get_key_info
f6c19cf mt76: add helpers for register access with mt76_dev struct
34a95b8 mt76: unify mac_shared_key_setup
4286255 mt76: unify mt76x02_mac_wcid_set_key
732535e mt76: unify mac_wcid_setup
51b74ac mt76: use mac_wcid_set_drop in mt76x0
1b4a98f mt76x0: use mt76_wcid_free in mt76x0
fcf2130 mt76: unify mt76x02_vif struct
1f35eb5 mt76: unify sta structure part 1
086ea9f mt76: unify sta structure part 2
caff9a2 mt76x0: initalize custom tx queues
7362da7 mt76x0: use mt76x02_sta and mt76x02_tx_status
3a03aa1 mt76: move mt76_reg_pair definition in mt76.h
a853831 mt76: split __mt76u_mcu_send_msg and mt76u_mcu_send_msg routines
a80564f mt76: move mt76x2u_mcu_deinit routine in mt76-usb module
ac92496 mt76: add multiple regs read support to usb_mcu layer
8b0e08f mt76x0: use mt76u_init for bus initialization
ef32115 mt76x0: remove mt76x0_vendor_reset routine
949858f mt76x0: remove mt76x0_vendor_single_wr routine
21ecb9b mt76x0: remove mt76x0_mcu_msg_alloc routine
4cfeebb mt76x0: use shared mt76 usb mcu completion
2600712 mt76x0: remove mt76x0_complete_urb routine
0bd0fe8 mt76x0: remove mt76x0_vendor_request routine
f88bde2 mt76x0: remove unused mt76x0_wait_asic_ready routine
7eca333 mt76x0: use mt76u_mcu_send_msg utility routine to send fw cmds
8fedb79 mt76x0: remove unused mt76x0_mcu structure
e8fe4f3 mt76x0: use mt76u_mcu_fw_send_data for fw uploading
b9c46a8 mt76x0: remove unused routines for usb_buff alloc/free
ed3366d mt76: Enable NL80211_EXT_FEATURE_CQM_RSSI_LIST
9867146 mt76: verify evt type in usb mcu response
82a8c8a mt76: move wcid fields to common mt76_dev struct
f409c6b mt76: unify sta_add / sta_remove
d972ddd mt76: pratially unify add_interface
f8f5788 mt76x0: fix wrong usage of wcid_mask in remove_interface
380f89c mt76: unify ampdu_action
8c7098e mt76: unify set_key
2a20cfc mt76x0: remove empty sta_notify
a690333 mt76: unify AC to hw queue mapping
4453308 mt76: unify conf_tx
d9352cb mt76x0: remove vif_mask
196720e mt76: unify remove_interface
57c3e89 mt76: unify add_interface
91fce2f mt76: unify sta_rate_tbl_update and related helpers
3977f48 mt76: unify txwi and rxwi structures
41e0403 mt76: unify load_tx_status
4674502 mt76: unify send_tx_status and related helpers
02816b0 mt76: use mt76_rx_status in mt76x0
0a17b1e mt76: unify mac_process_rate
8aac175 mt76x0: reserve enough space in mac80211
81a655a mt76: unify {insert/remove}_hdr_pad
d8f7d2e mt76: partially unify filling txwi fields
3533718 mt76x2: change mt76x2_tx_complete routine signature
469aeb1 mt76: move mt76x2_tx_complete routine in mt76x02-lib module
87f138b mt76: move mt76x2u_remove_dma_hdr in mt76x02-lib module
c87a7e8 mt76: move mt76x2u_tx_complete_skb in mt76x02-lib moudule
b85e072 mt76: move mt76_qsel definition in dma.h
53b3c5a mt76: move mt76x2u_set_txinfo in mt76x02-lib module
34cec25 mt76x0: introduce mt76x0_tx_prepare_skb routine
6c5ac15 mt76: move mt76x2u_tx_status_data in mt76x02-lib module
0ba8261 mt76x0: init mt76_driver_ops callbacks
2615090 mt76x0: use mt76_alloc_device for device allocation
3c40eaf mt76x0: disable usb rx bulk aggregation
746edd7 mt76x0: mark device as running in mt76x0_start
dd77785 mt76x0: simplify mt76_mac_process_rx signature
3739601 mt76x0: add mt76x0_queue_rx_skb routine
062aaa8 mt76x0: unify tx/rx datapath with mt76x2u driver
85f171f mt76x0: stop stat workqueue at hw stop
8c68115 mt76x0: set max fragments size
ac02f5c mt76x0: remove unused dma.c source file
964df72 mt76x0: remove unused stat work_queue
afb34b8 mt76x0: remove unused {tx/rx}_queue definitions
a4fd791 mt76x0: remove unused mt76x0_tx_status routine
0e92ff6 mt76x0: remove unused endpoint definitions
8340e19 mt76x0: remove unused stat_work
bfbbf05 mt76x0: enable per-sta tx queueing
a8fcaa3 mt76x0: init hw capabilities
6a9b73c mt76x0: trim rx skb to proper length
aa0c279 mt76: remove unused MT76_MORE_STATS state
873d792 mt76x0: remove mt76x0_stop_hardware routine
246a216 mt76: move mt76 rate definitions in mt76x02-lib module
aae3fb8 mt76x0: alloc mcu buffers first in mt76x0_mcu_cmd_init
3c693a1 mt76x0: fix memory leak during hw probe
98faee1 mt76x0: move stop related routines in mt76x0_mac_stop
d07c02a mt76x0: move mt76x0_init_hardware in mt76x0_register_device
12c01f4 mt76x0: do not free/alloc buffers during suspend/resume
297cc34 mt76x0: remove has_{2,5}ghz fields of mt76x0_eeprom_params
2d77a9a mt76x0: use mt76_register_device for device registration
bb57912 mt76x0: inital split between pci and usb
3e241f3 mt76x0: remove unused mt76x0_wcid
a8c61c2 mt76x0: remove some usb specific code from mt76x0_register_device
e4a7387 mt76x0: make device allocation bus neutral
6da4642 mt76x0: run vco calibration for each channel configuration
1ac35da mt76: move mt76x0 and mt76x2 mcu shared defs in mt76x02_mcu.h
4d43674 mt76: add mt76_mcu_ops data structure for mcu related pointers
479b153 mt76: add usb implementation of {wr,rd}_rp
e525b01 mt76: add rd_rp and wr_rp to bus_ops/mcu_ops
f5590b0 mt76: usb: use common helpers for mcu_alloc_msg()/mcu_send_msg()
d2773ce mt76: usb: move mt76x02 mcu code in mt76x02-usb module
6337ffb mt76: usb: move mt76u_skb_dma_info in mt76x02_usb_core.c
5a79f17 mt76x02: move TXD/RXD/MCU definitions in mt76x02_dma.h
88ece32 mt76x02: add static qualifier to mt76x02_remove_dma_hdr
d63b72f mt76x0: remove unused mt76x0_burst_read_regs
0aef244 mt76x0: remove mt76x0_burst_write_regs()
14aaf87 mt76: usb: remove skb check in mt76x{0,2}u mcu routines
46ba81c mt76x2: use mt76_dev instead of mt76x2_dev in mt76x2_tx_queue_mcu
dbc4442 mt76x2: remove leftover mt76u_buf data structure in mt76x2_mcu
26909cd mt76: introduce mmio data structure in mt76_dev
425e7e0 mt76: move __iomem regs in mt76_mmio
28cfe61 mt76x2: use mt76_dev instead of mt76x2_dev in mt76x2_mcu_msg_send
a1e27de mt76x2: use common helpers for mcu_alloc_msg()/mcu_send_msg()
90b1eac mt76: unify firmware header between mt76x0 and mt76x2
a0cbd4b mt76: move mt76{0,2} mcu shared code in mt76x02_mcu.c
a633c61 mt76x2: move mt76x2 mcu shared code in mt76x2_mcu_common.c
ce91108 mt76: move shared mcu_calibrate routine in mt76x02-lib module
2b3b4df mt76x2: move mt76x2_phy_tssi_compensate in mt76x2-common module
39a380a mt76: use a per rx queue page fragment cache
b4a2141 mt76x2u: run device cleanup routine if resume fails
df11092 treewide: Use struct_size() for kmalloc()-family
788becd treewide: devm_kzalloc() -> devm_kcalloc()
971005a mt76x2u: Add support for Alfa AWUS036ACM
878b0bd mt76: fix debugfs_simple_attr.cocci warnings
44ed12d wireless: Use octal not symbolic permissions
a6f80ef build: make building 76x2e and 7603e optional
1047913 mt76x0: usb: move firmware loading to usb.c
26b20f8 mt76x0: remove mcu source file
44145f3 mt76x0: remove unused usb header file
d56be99 mt76x0: usb: remove mt76_fw definition
3733445 mt76x2: fix tx power configuration for VHT mcs 9
0aced80 mt76x0: pci: add mt7650 PCI ID
35e88c0 mt76x0: pci: add fw uploading routine
3991afa mt76: move seq_put_array in mt76-core module
6cf6fba mt76: add stbc entries to mt76_rate_power
4451f99 mt76: move common eeprom definitions in mt76x02-lib module
c9100cb mt76: move eeprom utility routines in mt76x02_eeprom.h
611b8c7 mt76: move mt76x2_eeprom_get in mt76x02_eeprom.h
b59ed56 mt76: move mt76x02_mac_setaddr in mt76x02-lib module
844daeb mt76: move mt76x2_get_efuse_data in mt76x02-lib module
7556cb9 mt76: move mt76x2_ext_pa_enabled routine in mt76x02_eeprom.c
19d7853 mt76x0: remove mt76x0_set_country_reg routine
ba7a3da mt76: add mt76x02_get_rx_gain and mt76x02_get_lna_gain utility routines
35b0a2a mt76x0: unify lna_gain parsing
2a470db mt76x0: unify rssi_offset parsing
fe89537 mt76x0: unify temperature offset parsing
76bc22f mt76x0: unify freq offset parsing
bedeb3d mt76: move mt76x02_eeprom_parse_hw_cap in mt76x02-lib module
1adcd39 mt76x0: unify parse hw capabilities
df23620 mt76: move mt76x2_tssi_enabled in mt76x02_eeprom.h
ebca136 mt76: usb: remove WARN_ON in mt76u_get_rx_entry_len
cf8f750 mt76: fix return value of mt76x02_wait_for_mac
f802bd5 mt76: move mt76_rate_power in mt76_dev
4b6093c mt76: add mt76x02_phy_set_txpower utility routine
c206b8c mt76: move rate_txpower handler in mt76 debugfs
4da6fd3 mt76: move mt76x02_rate_power_val in mt76x02-lib module
fb3806d mt76x0: remove mt76x0_phy_set_tx_power and mt76x0_extra_power_over_mac
730db56 mt76x0: remove eeprom dependency from mt76x0_set_tx_power_per_rate
212fa2c mt76x0: remove eeprom dependency from mt76x0_get_power_info
280e452 mt76x0: use shared debugfs implementation
21fddc3 mt76x0: phy: introduce mt76x0_phy_set_txpower routine
b0d85d4 mt76: include linux/module.h in files using MODULE_*
a47083b mt76: report firmware version using ethtool
dc66f7c mt76: usb: make rx page_frag_cache access atomic
09d696b mt76: use skb_pad() instead of __skb_pad()
e8d7890 mt76x0: add quirk to disable 2.4GHz band for Archer T1U
e76fe15 mt76x2: disable WLAN core before probe
41c552f mt76x0: work around cflags issue in compat layer for trace.h
b95bc8a mt76x0: use mt76_poll in mt76x0_set_wlan_state
3a3554a mt76: move wait_for_wpdma in mt76x02_dma.h
0527feb mt76: add mt76x02_dma_enable/mt76x02_dma_disable utility routines
a8fda4b mt76: move mt76x02_set_irq_mask in mt76x02_mmio.c
11e3028 mt76: move queue initialization in mt76x02_mmio.c
5a29094 mt76: move mt76x02_beacon_offset in mt76x02_util.c
5f1d0ff mt76: mmio: add implementation of wr_rp and rd_rp
47eee35 mt76: move mt76x2_wait_for_bbp in mt76x02-lib module
7cc4be7 mt76x0: update initvals to latest version of vendor driver
e1a2179 mt76x0: pci: move mcu code in pci_mcu.c
886f6fc mt76x0: usb: move mcu code in usb_mcu.c
c7b28f4 mt76x0: use mt76x02 utility routines in mt76x0 init code
005d40a mt76x0: init: remove duplicated initialization
94776fe mt76x0: init: remove MT_PBF_SYS_CTRL configuration in mt76x0_reset_csr_bbp
5bb8339 mt76x0: init rx filter in mt76x0_init_hardware
fe1379a mt76: add mt76x02_mac_start routine
da982d3 mt76x0: usb: move initialization code in usb.c
22be43e mt76x0: pci: add hw initialization at bootstrap
15a50e1 mt76x0: phy: set antenna parameter according to wireless band
5d2a331 mt76: move set_{tx,rx}_path routines in mt76x02-lib module
8050d71 mt76x0: add ieee80211_ops ops pointer to mt76x0_alloc_device signature
c240904 mt76x0: pci: add mt76x0e_{start/stop} callbacks
b50f38a mt76x0: eeprom: load eeprom data from mtd by default
fb5bae0 mt76x0: usb: move mt76x0u_tx_prepare_skb in usb.c
4047e1f move mt7603 source files to mt7603/
14f70f4 mt7603: fix wcid for frames sent via drv_tx
542f17e mt76: fix handling ps-poll frames
7464cc9 mt76: check aggregation sequence number for frames sent via drv_tx
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
| |
6e1898d mt76x2: fix tx power configuration for VHT mcs 9
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
| |
7daf962 mt7603: add survey support
980c606 mt7603: add fix for CCA signal configuration
30b8371 mt7603: fix BAR rate
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
| |
08719b1 mt76: use a per rx queue page fragment cache
4d2c565 mt76x2: reset HW before probe
f622975 mt76x2: fix CCK protection control frame rate
6780375 mt76x2: add frame protection support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
| |
1d4ca10 mt76x2: track rssi for gain adjustment per station
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
| |
072fdac mt76x2: mac: consider multicast/broadcast frames in ewma rssi estimation
f450659 mt76x2: improve gain adjustment in noisy environments
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
|
|
|
| |
9090f9c mt76x2: fix threshold for gain adjustment
2cbaa57 mt76x2: fix swapped values for RXO-18 in gain control
a39ab70 mt76x2: adjust AGC control register 26 based on gain for VHT80
4936c0c mt76x2: clear false CCA counters after changing gain settings
1528fe7 mt76x2: fix variable gain adjustment range
f3522e1 mt76x2: add a debugfs file to dump agc calibration information
65e161b mt76x2: fix tracking rssi for dynamic gain adjustment
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
20c0766 mt7603: adjust rx hang watchdog for MT7628
664e321 mt7603: add extra PSE hang check signature for MT7628
f24b56f update MT7628 firmware to the latest version
d87e4b0 mt7603: clear PSE reset bit if PSE reset fails
0ef26ef mt76: only stop tx queues on offchannel, not during the entire scan
f399da3 mt76: prevent tx scheduling during channel change
21c1e1e mt76: move ieee80211_hw allocation to common core
730c292 mt76: wait for pending tx to complete before switching channel
fcbb49e mt76x2: use udelay instead of usleep_range in mt76x2_mac_stop
792dbe0 mt7603: do not hold dev->mutex while flushing dev->mac_work
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
| |
73edb22 mt76: discard early received packets if not running yet
0b8d1dd mt76: fix beacon timer drift
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
| |
b2ecc52 mt76x2: fix avg_rssi estimation
fd58b28 mt76x2: add a polling delay in mt76x2_mac_stop routine
a78673d mt76: fix sending encrypted broadcast packets for secondary interfaces
e87f925 mt76x2: apply coverage class on slot time too
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
| |
ec8435e mt76: initialize rx lock earlier
e08d5da mt76x2: fix is_mt7612 routine
e2eedc9 mt7603: retry PSE reset calls
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
| |
ea6dd6f mt7603: add missing spin lock init
2d08440 mt76: add rcu locking around tx scheduling
8c92c91 mt7603: turn vif wcid entry back into a full mt7603_sta
ca5cc9a mt76: fix concurrent rx calls on A-MPDU release
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1d23142 mt76: add led active low to debugfs
549f43b mt7603: ensure that the ACK flag is set for A-MPDUs with any acked subframe
df9f9f6 mt7603: always try tx rate1 first
9c52f36 mt7603: pull the final rate index from the status descriptor
f36f308 mt7603: improve validation of rx frames
9a23989 mt7603: remove warning on rx with invalid channel info
7a31731 mt76: check for pending reset before attempting to schedule tx
873a7c9 mt7603: call mt76_txq_schedule_all as a barrier to prevent tx during reset
d9e5da3 mt76: add rcu locking in tid reorder function
a8e8921 mt7603: add more checks to avoid dereferencing invalid pointers in wcid lookup
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
c66094e mt76x2: fix possible NULL pointer dereferencing in mt76x2_tx()
249fa2d mt76x2: fix warning in ieee80211_get_key_rx_seq()
54d6710 mt76: use mt76_poll_msec routine in mt76pci_load_firmware()
eb359f1 mt76x2: remove unnecessary len variable in mt76x2_eeprom_load()
7e6e00b mt76: initialize available_antennas_{tx,rx} info
6469dca mt76: add mt76_init_stream_cap routine
ced433d mt76x2: add mac80211 {set,get}_antenna callbacks
238f3f1 mt76x2: remove warnings in mt76x2_mac_write_txwi()
880611b mt7603: main: fix warning in ieee80211_get_key_rx_seq()
bc35af8 mt76x2: fix tssi initialization for 5GHz band
700ed20 mt76x2: make mt76x2_mac_reset routine static
6e7d5ce mt76x2: remove unnecessary MT_TX_ALC_CFG_4 configuration
5153ece mt76x2: set default values in TX_ALC_CFG_{1,2} for tempetaure compensation
a3e7740 mt76x2: fix tx_alc_enabled check
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
| |
cda627f mt76: add missing VHT maximum A-MPDU length capability
ffa2069 mt76: fix potential sleep in atomic context
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
| |
issues
62d52e9 mt76: set RX_FLAG_DUP_VALIDATED for A-MPDU reordered packets
5ba5995 mt76x2: rework tx power handling
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
| |
3413961 mt7603: avoid reordering qos-null data packets
c60e6db mt76: toggle driver station powersave bit before notifying mac80211
246d548 mt76: stop tx queues from the driver callback instead of common code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
2b7fae4 mt76: fix returnvar.cocci warnings
939e3e0 mt76x2: dfs: avoid tasklet scheduling during mt76x2_dfs_init_params()
cf59170 mt76x2: dfs: add set_domain handler
5e4d60e mt76x2: dfs: take into account dfs region in mt76x2_dfs_init_params()
f76e25f mt76x2: fix WMM parameter configuration
34d612d mt76: retry rx polling as long as there is budget left
0f8327a mt76x2: fix TSF value in probe responses
ad3f8e9 mt76: add an intermediate struct for rx status information
58a41f1 mt76: get station pointer by wcid and pass it to mac80211
b0508d3 mt76: implement A-MPDU rx reordering in the driver code
cf3cfc4 mt76: split mt76_rx_complete
461cdf9 mt76: pass the per-vif wcid to the core for multicast rx
9b2c778 mt76: validate rx CCMP PN
302af90 mt76x2: init: disable all pending tasklets during device removal
9f685fe mt7603: init: disable tbtt tasklet during device removal
c6f8cac mt76: let mac80211 validate CCMP PN for fragmented frames
3968dae mt7603: fix 40 mhz channel bandwidth reporting
9c2e03d mt7603: fix rx LDPC reporting
f515dfc mt76: implement AP_LINK_PS
974142c mt76: implement processing of BlockAckReq frames
c5209db mt76: avoid re-queueing A-MPDU rx reorder work if no frames are pending
e67e7a5 mt76x2: do not set status->aggr for NULL data frames
8693864 mt76: check qos ack policy before reordering packets
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
| |
This reverts commit 99eb128acaf76a69119fd2de8e194f2b2bbb0427.
Connectivity issues reported by users, needs rework
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
2b7fae4 mt76: fix returnvar.cocci warnings
939e3e0 mt76x2: dfs: avoid tasklet scheduling during mt76x2_dfs_init_params()
cf59170 mt76x2: dfs: add set_domain handler
5e4d60e mt76x2: dfs: take into account dfs region in mt76x2_dfs_init_params()
f76e25f mt76x2: fix WMM parameter configuration
34d612d mt76: retry rx polling as long as there is budget left
0f8327a mt76x2: fix TSF value in probe responses
ad3f8e9 mt76: add an intermediate struct for rx status information
58a41f1 mt76: get station pointer by wcid and pass it to mac80211
b0508d3 mt76: implement A-MPDU rx reordering in the driver code
cf3cfc4 mt76: split mt76_rx_complete
461cdf9 mt76: pass the per-vif wcid to the core for multicast rx
9b2c778 mt76: validate rx CCMP PN
302af90 mt76x2: init: disable all pending tasklets during device removal
9f685fe mt7603: init: disable tbtt tasklet during device removal
c6f8cac mt76: let mac80211 validate CCMP PN for fragmented frames
3968dae mt7603: fix 40 mhz channel bandwidth reporting
9c2e03d mt7603: fix rx LDPC reporting
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
performance regressions
cf4a5ce mt76: fix memcpy to potential null pointer on failed allocation
ca5ca8c mt76x2: fix possible NULL pointer dereferencing in mt76x2_ampdu_action()
2d4b8f5 mt76x2: mac: fix possible NULL pointer dereferencing in mt76x2_mac_write_txwi()
4ca8bba mt76x2: eeprom: fix typo in mt76x2_get_power_info_5g()
00f7e60 mt7603: fix configuration for HT40
31e9bdb mt7603: main: fix possible NULL pointer dereferencing in mt7603_ampdu_action()
bf90dd2 mt7603: mcu: fix potential NULL pointer dereferencing on failed allocation
860b185 Revert "mt76x2: init: disable APCLI by default"
bcd576e Revert "mt76x2: drop wiphy->addresses"
bdc6f2f Revert "mt76x2: clean up MAC/BSSID address initialization"
d242650 Revert "mt76x2: remove MAC address limitation for multi-vif setups"
68b0cf1 mt76x2: add functions for setting extended MAC address registers
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
d02a05b mt7603: update firmware to version 20160107100755
4d4cd05 Partially revert "mt7603: use mcu command to set timing registers, fix OFDM timeout values"
170f334 mt76x2: remove MAC address limitation for multi-vif setups
3563b8f mt76x2: clean up MAC/BSSID address initialization
9de77e1 mt76x2: drop wiphy->addresses
a6a6e25 mt76x2: init: disable APCLI by default
c64633e mt76x2: configure rx filter based on monitor mode setting
ac815fa mt76x2: init: fix rx filter default value during init
e504656 mt7603: configure other-unicast drop based on monitor mode setting
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
11f42a8 mt76x2: add channel argument to eeprom tx power functions
3bd7e76 mt76x2: initialize channel power limits
19fff41 mt76x2: convert between per-chain tx power and combined output
737cf2b mt7603: rename mt7603_mac_reset to mt7603_pse_reset
8026638 mt7603: rename MT_PSE_RESET register
c4dd32a mt7603: remove watchdog reset on interface stop
d99092b mt7603: remove WARN_ON_ONCE for workaround checks
c8807b4 mt7603: simplify PSE reset
d8a5990 mt7603: warn if PSE reset fails
c079960 mt7603: clean up dma debug reads
96817d6 mt7603: make mt7603_mac_watchdog_reset() static
e953c78 mt7603: clear wtbl PS bit for powersave responses
57a2e33 mt7603: set tx-skip flag for powersave clients
c8e5ab1 mt7603: initialize wtbl ps flag on station add
b4034cf mt76x2: remove some harmless WARN_ONs in tx status and rx path
8e17d36 mt7603: remove some harmless WARN_ONs in rx path
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
| |
fc28872 mac80211: add missing include
a4c82ca mt7603: add missing include required on newer kernels
792859b mt76x2: fix transmission of encrypted management frames
a51358e mt76x2: increase OFDM SIFS time
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Significantly improves throughput on MT76x2, fixes some stability
issues, adds LED support.
Changes:
266ef38 mt76x2: mcu: remove unused parameter in mt76x2_mcu_msg_alloc signature
758376d mt7603: mcu: remove unused parameter in mt7603_mcu_msg_alloc() signature
e764787 Fix errors found by cppcheck
a6fce8a mt7603: add LED definition registers
f658dd2 mt76x2: add LED register definitions
f6a021d mt76x2: Support using PCI ID as chip ID
c9bdcd8 mt76: add led support using mac80211 led framework
58e9138 mt76x2: init: add ma80211 led callbacks
8ea8da3 mt7603: init: add ma80211 led callbacks
ded88cd mt76x2: Add PCI identifier for MT7602
51a6764 mt7603: remove unnecessary mcu register read function
fbdbf65 debugfs: add support for changing the LED pin
cc02e49 mac80211: move DT led configuration to the "led" child node
e4e7734 mt76x2: limit client WCID entries to 0-127
60172cc mt76x2: clear drop flag for all WCIDs on init
d8140b6 mt76x2: clear per-WCID tx rate lookup register
0ce7923 mt76x2: add helper function for setting drop mask
ccc4baf mt76x2: clear drop mask when sending a PS response
ff60d14 mt76: increase rx ring size for mt76x2
b57ada5 mt76x2: add rx statistics registers
af425de mt76x2: fix LNA gain register annotation
efd7724 mt76x2: sync channel gain value with latest reference driver
4af37bd mt76x2: implement dynamic AGC tuning based on false packet detection count
70f2002 mt76x2: add more gain tuning based on the latest reference driver
8f1c8ab mt76x2: sync tx power related values with reference driver
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
| |
The build system already defines KERNEL_CROSS which defaults to TARGET_CROSS.
Make use of this variable for kernel makefiles.
Signed-off-by: Karl Vogel <karl.vogel@gmail.com>
|
|
|
|
|
|
|
| |
Now that we have working module dependency generation, we can switch to
AutoProbe and let modprobe handle loading required modules.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|
|
|
|
|
|
| |
e781569 update to latest mac80211/cfg80211 API changes
37654d7 mt76x2: fix tx status ampdu length corner case
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This updates mac80211 to backprots-4.14-rc2.
This was compile and runtime tested with ath9k, ath10k and b43
with multiple stations and ieee80211w and in different scenarios by many
other people.
To create the backports-4.14-rc2-1.tar.xz use this repository:
https://git.kernel.org/pub/scm/linux/kernel/git/backports/backports.git
from tag v4.14-rc2-1
Then run this:
./gentree.py --git-revision v4.14-rc2 --clean <path to linux repo> ../backports-4.14-rc2-1
This also adapts the ath10k-ct and mt76 driver to the changed cfg80211
APIs and syncs the nl80211.h file in iw with the new version from
backports-4.14-rc2.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
|
|
|
|
|
|
|
| |
cb83f33 mt7603: mac: fix logic in mt7603_tx_hang()
21f20b4 mt7603: mac: fix register configuration in mt7603_rx_dma_busy()
d5e945e mt7603: mcu: fix indentation of mcu command definition
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
| |
The commit merging mt7628 and mt7688 failed to update some
dependencies.
Signed-off-by: John Crispin <john@phrozen.org>
|
|
|
|
|
|
|
|
| |
8a649c3 mt7603: mac: code optimization
8dee788 mt7603: mac: stop netdev queues during watchdog reset
3c4c9a6 tx: move state check in mt76_txq_send_burst()
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fixes mt7603 stablity and performance issues
af32615 mt7603: change auto rate control register initialization
01fb9ba mt7603: fix control/status retries count estimation
cf4ba12 mt7603: avoid tx rate sampling using no retransmissions
32eab50 mt7603: set wtbl entry vif index
c4e3dea mt7603: use the real vif index in txwi header for normal tx.
e90a81a mt7603: fix channel width fall back in TXWI
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
| |
Should improve performance considerably in many cases
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
| |
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
| |
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
| |
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
| |
Fixes errors during the image builder run
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
| |
9f02db7 mt76x2: fall back to software crypto for IBSS/Mesh per-sta GTK
4a54ab3 mt7603: fall back to software crypto for IBSS/Mesh per-sta GTK
712b8e8 mac80211: claim RSN IBSS support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
03e44dc mt76x2: remove unnecessary headroom check
cc70498 mt76x2: clarify queue selection field
b056a78 dma: fix endian issue in mt76_dma_get_buf
f020a60 mt7603: support loading the entire EEPROM from OTP
29b08d3 mt7603: fix endian issue in mt7603_mcu_set_timing
dce8aac mt7603: fix endian issue in mt7603_mac_fill_rx
f22273b mt7603: init WTBL entry before setting capabilities
da8e796 mt7603: check wtbl busy status and stop/start tx queues when clearing sta entry
e54add5 mt7603: move napi/tasklet enable/disable outside of the locked section
59ce2b4 mt7603: set tx vif own MAC index (needed for beacons)
93ce124 mt7603: enable beacons for other virtual interfaces
c91e660 mt7603: set secondary beacon time offsets
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch splits `kmod-mt76` into three separate packages:
`kmod-mt76-core`, `kmod-mt76x2` and `kmod-mt7603`. By making
`kmod-mt76` a metapackage containing these new packages,
the previous behaviour of including all drivers and firmware
is left unchanged, unless explicitly unselected in
`DEVICE_PACKAGES`.
This splitting is especially beneficial for devices with
small flash chips, since the `kmod-mt76` package currently
requires ~160K on squashfs (after compression).
Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
|
|
|
|
| |
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|