aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel/linux
Commit message (Collapse)AuthorAgeFilesLines
* kernel: iio: add fxas21002c driver supportPawel Dembicki2020-11-231-0/+50
| | | | | | This patch adds kernel modules for Freescale FXAS21002C 3-axis gyro driver. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kernel: remove mvsw61xx swconfig driverDENG Qingfang2020-11-161-14/+0
| | | | | | | All targets that used mvsw61xx have switched to upstream mv88e6xxx DSA driver, so it can be removed. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* kernel: remove kmod-capiFelix Fietkau2020-11-131-20/+0
| | | | | | We don't package any driver that uses this module Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add module support Solarflare network adapterTan Zien2020-11-121-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to Solarflare user guide it is recommended to install lm-sensors and use the following command to obtain adapter health info $ sensors | grep sfc sfc pci 0400 sfc pci 0401 $ sensors sfc pci 0400 sfc pci 0400 Adapter: PCI adapter 1.2V supply: N/A 3.3V supply: +3.22 V (min = +3.00 V, max = +3.60 V) 12.0V supply: +12.14 V (min = +11.04 V, max = +12.96 V) 0.9V supply (ext. ADC): +1.03 V (min = +0.50 V, max = +1.10 V) (crit max = +1.15 V) 0.9V phase A supply: N/A PHY overcurrent: N/A ERROR: Can't get value of subfeature temp1_alarm: Can't read PHY temp.: N/A AOE FPGA temp.: +68.0°C (low = +0.0°C, high = +95.0°C) (crit = +105.0°C) Ambient temp.: +56.0°C (low = +0.0°C, high = +75.0°C) (crit = +85.0°C) Controller die (TDIODE) temp.: +77.0°C (low = +0.0°C, high = +95.0°C) (crit = +105.0°C) Board front temp.: +59.0°C (low = +0.0°C, high = +75.0°C) (crit = +85.0°C) Board back temp.: +62.0°C (low = +0.0°C, high = +75.0°C) (crit = +85.0°C) 1.2V supply current: N/A 0.9V phase A supply current: N/A 3.3V supply current: N/A 12V supply current: N/A Signed-off-by: Tan Zien <nabsdh9@gmail.com>
* netfilter: Add queue support for nftablesBrett Mastbergen2020-11-121-0/+12
| | | | | | | | | This change adds the configuration option to build and include the nft_queue kernel module, which allows traffic to be queued up to userspace from an nftables rule Tested-by: Sébastien Delafond sdelafond@gmail.com Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
* kernel: remove obsolete kernel version switches for 4.19Adrian Schmutzler2020-10-3010-68/+18
| | | | | | | This removes switches dependent on kernel version 4.19 as well as several packages/modules selected only for that version. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* Revert "kmod-nft-reject: Fix for "nft_reject_ipv4.ko missing" warning"Daniel Golle2020-10-301-3/+0
| | | | | | | | | This reverts commit 7f94e2afcf090f751c9f7f7ea46e8ef8d93ee84b. Package kmod-nft-core is missing dependencies for the following libraries: nft_reject.ko Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kmod-nft-reject: Fix for "nft_reject_ipv4.ko missing" warningPhilip Prindeville2020-10-301-0/+3
| | | | | | | | | | Seeing the following: ERROR: module '/home/philipp/lede/build_dir/target-x86_64_musl/linux-x86_64/linux-5.4.33/net/ipv4/netfilter/nft_reject_ipv4.ko' is missing. modules/netfilter.mk:1068: recipe for target '/home/philipp/lede/bin/targets/x86/64/packages/kmod-nft-core_5.4.33-1_x86_64.ipk' failed make[3]: *** [/home/philipp/lede/bin/targets/x86/64/packages/kmod-nft-core_5.4.33-1_x86_64.ipk] Error 1 Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* kernel: add a kmod package for the SoC S/PDIF codecAndre Heider2020-10-111-0/+14
| | | | | | | | Size of the modules for a Cortex A7 build: 43920 linux-5.4.66/sound/soc/codecs/snd-soc-spdif-rx.ko 44044 linux-5.4.66/sound/soc/codecs/snd-soc-spdif-tx.ko Signed-off-by: Andre Heider <a.heider@gmail.com>
* kernel: fix name of CONFIG_SND_SOC_GENERIC_DMAENGINE_PCMAndre Heider2020-10-111-2/+2
| | | | | | | | | CONFIG_SND_SOC_DMAENGINE_PCM was removed and replaced with CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM seven years ago, see: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=28c4468b00a1e55e08cc20117de968f7c6275441 https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b7ae6f31d8243ec684af16bc5c763eccdfabaec0 Signed-off-by: Andre Heider <a.heider@gmail.com>
* kernel: Move CONFIG_*_FS_XATTR to generic kernel configHauke Mehrtens2020-10-111-3/+1
| | | | | | | This option is now activated in the generic kernel configuration, no need to do it for a specific package. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: move CONFIG_F2FS_CHECK_FS to generic kernel configHauke Mehrtens2020-10-111-4/+1
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Move CONFIG_F2FS_FS_SECURITY to generic kernel configHauke Mehrtens2020-10-111-1/+0
| | | | | | | Move the CONFIG_F2FS_FS_SECURITY kernel configuration option to the generic kernel configuration. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Remove 2FS_FS_XATTR and F2FS_STAT_FS symbols from target configsHauke Mehrtens2020-10-111-2/+0
| | | | | | | This config option was moved to the generic kernel configuration. Fixes: ab1bd576562b ("kernel: move F2FS_FS_XATTR and F2FS_STAT_FS symbols to generic") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* layerscape: add layerscape's SATA driver packagePawel Dembicki2020-10-021-1/+1
| | | | | | | | | | | This patch intruduce SATA support for layerscape devices. Target specific package with ahci_qoriq driver was added to local modules.mk. Kmod package was added to default packages for devices with SATA interface. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com>
* build: define PWM_SUPPORT arch feature flagChristian Lamparter2020-09-251-0/+16
| | | | | | | | | | As the PWM has its own sub-system in the Linux kernel, I think it should be handled in the same way as GPIO, RTC, PCI... This patch introduces a specific feature flag "pwm" and the "leds-pwm" kernel module as the first customer. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: drop kmod-bmp085, kmod-bmp085-i2c and kmod-bmp085-spiAleksander Jan Bajkowski2020-09-181-47/+0
| | | | | | | | | | CONFIG_BMP085* is replaced by CONFIG_BMP280 since 4.9[1] and this package is empty. OpenWRT also has kmod-iio-bmp280* package and we can drop old packages. 1. [ misc: retire the old BMP085 driver ] (https://github.com/torvalds/linux/commit/832c8232dd7be4977ae9fb9c7cbc4decce19a8fc#diff-5000d544d790c669405eb2a6775e5981) Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* kernel: add module support Intel Ethernet Controller I225 SeriesTan Zien2020-09-181-0/+15
| | | | | | add kernel module igc support Intel Ethernet Controller I225 Series. Signed-off-by: Tan Zien <nabsdh9@gmail.com>
* kernel: improve the description of fs-nfs-v4Bob Cai2020-09-101-1/+1
| | | | | | | | | | | TITLE is "NFS4 filesystem client support" (Line 428) but the description is "Kernel module for NFS v4 support" (Line 438). Use "Kernel module for NFS v4 client support" on line 438. Signed-off-by: Bob Cai <1119283622@qq.com> [commit title/message facelift] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: remove obsolete kernel version switches for 4.14Adrian Schmutzler2020-09-0210-94/+34
| | | | | | | | | | This removes switches dependent on kernel version 4.14 as well as several packages/modules selected only for that version. This also removes sched-cake-virtual, which is not required anymore now that we have only one variant of cake. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* samsung: drop targetAdrian Schmutzler2020-09-021-2/+2
| | | | | | | | | This target is still on kernel 4.14, and no attempt has been made to update it to a newer kernel. Since we already are two LTS versions ahead of that the target is dropped, as the chance of somebody bumping it will only decrease with time. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* leds: add activity led trigger kernel module packageSven Wegener2020-08-301-0/+14
| | | | | | | The activity trigger flashes like the heartbeat trigger, but adjusts based on system load. Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
* ar71xx: drop targetAdrian Schmutzler2020-08-301-1/+1
| | | | | | | | | | This target has been mostly replaced by ath79 and won't be included in the upcoming release anymore. Finally put it to rest. This also removes all references in packages, tools, etc. as well as the uboot-ar71xx and vsc73x5-ucode packages. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: set WATCHDOG_CORE dependency in kmod-hwmon-sch5627Adrian Schmutzler2020-08-241-1/+3
| | | | | | | | | | | | | | | | | | For many target we have added CONFIG_WATCHDOG_CORE=y to the target config due to the following error: Package kmod-hwmon-sch5627 is missing dependencies for the following libraries: watchdog.ko However, actually the proper way appears to be setting the dependency for the kmod-hwmon-sch5627 package, as the error message demands. Do this in this patch and remove the target config entries added due to this issue. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: wpan: Add kmod-ca8210Hauke Mehrtens2020-08-211-0/+16
| | | | | | This device is found on the pistachio marduk board. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: wpan: Add missing AUTOLOAD to load kernel moduleHauke Mehrtens2020-08-211-0/+3
| | | | | | | These kernel modules were not loaded automatically, fix this by adding the AUTOLOAD definition. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: usb: move phy-qcom-ipq806x-usb to ipq806x modules.mkAnsuel Smith2020-08-131-18/+0
| | | | | | | | | | This driver is only used by ipq806x SoCs. Move it there and drop dependency from ipq40xx since it's not used anywere. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [rebase on changes to previous patches] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> [R7800]
* ipq806x: replace phy dwc3 patch with upstream versionAnsuel Smith2020-08-131-7/+7
| | | | | | | | | | | | - Replace dwc3 phy patch with upstream version - Rework the dts to use the upstream bindings - Update changed config flags - Rename module to reflect config name Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [fix qcom,tx-deamp_3_5db typo, refresh patches, rename kmod] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> [R7800]
* treewide: make dependency on kmod-usb-net selectiveAdrian Schmutzler2020-08-101-1/+1
| | | | | | | | A bunch of kernel modules depends on kmod-usb-net, but does not select it. Make AddDepends/usb-net selective, so we can drop some redundant +kmod-usb-net definitions for DEVICE_PACKAGES. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: modules: add package kmod-iosched-bfqDaniel Golle2020-08-101-0/+14
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Revert "procd: update to git HEAD"Daniel Golle2020-08-061-14/+0
| | | | | | This reverts commit e0e607f0d000e62c6af8d822d7c3f57c2a582136. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: update to git HEADDaniel Golle2020-08-061-0/+14
| | | | | | | | | | | 47a9f0d service: add method to query available container features afbaba9 initd: attempt to mount cgroup2 ead60fe jail: use pidns semantics also for timens 759e9f8 jail: make use of BLOBMSG_CAST_INT64 for OCI rlimits 83053b6 instance: add instances into unified cgroup hierarchy 16159bb jail: parse OCI cgroups resources Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* staging: remove staging exfat driverRosen Penev2020-08-011-24/+0
| | | | | | This will be replaced with the driver found in newer kernels. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: kmod-zram: break the strict dependency from lz4Rui Salvaterra2020-07-112-4/+2
| | | | | | | | Zram is only strictly dependent on lzo, not lz4. Break this dependency and make the lz4 module visible in the configuration, in order for the user to have the choice of enabling/disabling it, if (s)he sees fit. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* linux-firmware: package EIP197 mini firmwareTomasz Maciej Nowak2020-07-111-4/+6
| | | | | | | | | | | | | Quoting part of original message from eefb5f741015 commit in linux-firmware repository: This adds the "minifw" version of the EIP197 firmware, which the inside- secure driver will use as a fallback if the original full-featured firmware cannot be found. This allows for using the inside-secure driver and hardware without access to "official" firmware only available under NDA. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* kernel: add package for Seiko S-35390A I2C RTCPawel Dembicki2020-07-111-0/+17
| | | | | | This patch adds kernel package for Seiko Instruments S-35390A. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kernel: iscsi-initator: fix kernel config symbolsLucian Cristian2020-07-091-2/+2
| | | | | | | | | | | | | | | Enable SCSI low-level drivers on targets that don't have it already in order to fix following build failures on few platforms: .config:4739:warning: symbol value 'm' invalid for SCSI_LOWLEVEL * Restart config... * SCSI low-level drivers SCSI low-level drivers (SCSI_LOWLEVEL) [Y/n] (NEW) aborted! Fixes: b88f8202c4ce ("kernel: add iscsi-initator support") Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com> [commit subject and description facelift] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: iscsi-initator: fix missing dependencyPetr Štetiar2020-07-081-1/+1
| | | | | | | | | | Fixes following issue: Package kmod-iscsi-initiator is missing dependencies for the following libraries: crypto_hash.ko Fixes: b88f8202c4ce ("kernel: add iscsi-initator support") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: add iscsi-initator supportLucian Cristian2020-07-081-0/+26
| | | | | | | | Module is needed for using iscsi-initiator userspace applications Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com> [added missing newline between kernel modules] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: i2c-pxa: remove slaveScott Roberts2020-06-271-1/+0
| | | | | | | | | | | | | | | | Removing i2c pxa slave The i2c-pxa is typically not use in slave mode. It does not make sense to have slave mode enabled by default. Having slave mode enabled prevents the i2c controller from being reset if a real slave device such as an SFP is attached to the i2c-pxa bus and locks it up. Disable slave mode so that the i2c controller can be reset if the bus is locked up. If someone actually has a need for pxa slave mode this can be enabled in kernel config. Signed-off-by: Scott Roberts <ttocsr@gmail.com>
* kernel: add gpio-amd-fch module descriptionFlorian Eckert2020-06-261-0/+17
| | | | | | Add a module description for the new gpio-amd-fch device driver. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* kirkwood: move mmc/sd features to modulesPawel Dembicki2020-06-141-0/+17
| | | | | | | | | | All devices are using nand images. Built-in MMC/SD modules are not needed anymore. Run tested: pogo v4 Reviewed-by: Sungbo Eo <mans0n@gorani.run> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kernel: iio: add drivers for st_lsm6dsx IMU MEMS sensorsTim Harvey2020-06-031-0/+48
| | | | | | | | Add kmod for the ST LSM6DSX IMU driver. Signed-off-by: Tim Harvey <tharvey@gateworks.com> [fixed missing regmap module dependencies] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: iio: fix st_accel_{i2c, spi} driverTim Harvey2020-06-031-21/+25
| | | | | | | Add missing kernel module and rename driver Fixes: 2d8f4c4fbd46 ("kernel: iio: add st-accel driver modules") Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* kernel: add gpio-it87Florian Eckert2020-06-031-0/+18
| | | | | | | | | | | | | | | Since commit 910df3f06cc902ca2cb0ca8e963e9354c930df1a we have build in on all X86/64 platforms the gpio-it87 driver. Since this change I am getting the following error message on boot. > kern.err kernel: [ 1.009416] gpio_it87: no device I do not have this device on my system. To prevent the nonsensical message and the loading of the module I have added this as a package, so that it can be installed later or during image building. Signed-off-by: Florian Eckert <fe@dev.tdt.de> Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
* kernel: kmod-ptp-qoriq: Package kernel object fileJeffery To2020-05-201-2/+2
| | | | | | | This updates the package to contain the kernel object (.ko) file instead of the plain object (.o) file. Signed-off-by: Jeffery To <jeffery.to@gmail.com>
* kernel: hwmon: add Analog Devices AD741x supportDavid Bauer2020-04-291-0/+14
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: support intel X7xx 10/40GbE adaptersXiaobo Tian2020-04-261-0/+42
| | | | | | Signed-off-by: Xiaobo Tian <peterwillcn@gmail.com> [Add i40evf/i40evf.ko and setect CONFIG_IAVF] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: netdev: fix kmod-sfp symbolsDavid Bauer2020-04-261-2/+2
| | | | | | Fixes: ec2f7a47d379 ("kernel: add module to support SFP cages") Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: netdev: fix kmod-sfp description capitalizationDavid Bauer2020-04-261-1/+1
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 04:52:38 +0000