aboutsummaryrefslogtreecommitdiffstats
path: root/package/firmware
Commit message (Collapse)AuthorAgeFilesLines
* layerscape: support all-in-one firmware for ls1088ardb/ls2088ardbYangbo Lu2017-11-101-1/+13
| | | | | | | Suppport all-in-one firmware for ls1088ardb/ls2088ardb by integrating u-boot/rcw/mc/dpl/restool. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add dpl firmware packageYangbo Lu2017-11-101-0/+58
| | | | | | | This patch is to add data path layout files for the second generation Data Path Acceleration Architecture. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add mc firmware packageYangbo Lu2017-11-101-0/+57
| | | | | | | | This patch is to add package support for Management Complex Firmware for the second generation Data Path Acceleration Architecture. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: move fman/rcw/ppfe packages to layerscape/Yangbo Lu2017-11-104-0/+0
| | | | | | | This patch is to create a layerscape directory for all firmware packages of layerscape. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* ath10k-firmware: qca9888 firmware: remove board.binHenryk Heisig2017-10-271-3/+0
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* linux-firmware: add ath6k firmware to packageBen Whitten2017-10-151-0/+10
| | | | | | | Systems which include the ath6k chipset need to have the firmware included in the image. Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
* ath10k-ct firmware: Tx-hang and EAPOL handling fixes for wave-2 firmware.Ben Greear2017-10-121-10/+10
| | | | | | | | | | | | | | | | | | Changes since last LEDE release include: * Fix key-setting bug that broke sending the EAPOL 2/4 in some cases. This was a bug I introduced some time back while trying to fix .11r and simplify the key handling logic. (Patch to wpa_supplicant fixed the race with sending the 4/4 and setting the key...un-patched supplicant will still have this race and the 4-way auth will not work as reliably.) * Increase amount of active-tids that can be scheduled. This fixes a tx-stall seen with many station vdevs. * Fix bug in upstream code that would cause the maximum peer to never be scheduled for tx. Signed-off-by: Ben Greear <greearb@candelatech.com>
* layerscape: update packages with LSDK git treesYangbo Lu2017-10-073-22/+42
| | | | | | | | | | | | | | | | | NXP Layerscape LSDK had set up its own open source web site and github for release. https://lsdk.github.io https://github.com/qoriq-open-source This patch is to update rcw/fman_ucode/u-boot packages with LSDK git trees. Also add some patches of packages to support LEDE. Since ARMv8 32-bit u-boot images are same with ARMv8 64-bit images but 64-bit toolchain couldn't be used for 32-bit targets, we still use a private tree for ARMv8 32-bit u-boot images. This is in plan to move this private tree to NXP Layerscape github. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* linux-firmware: fix intel wireless-n 100 firmware package nameFelix Fietkau2017-09-281-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq-wifi: fix missing define of PKG_NAMEChen Minqiang2017-09-201-0/+1
| | | | Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* ath10k-firmware: use firmware from git instead of extra downloadHauke Mehrtens2017-09-181-28/+3
| | | | | | | | Instead of manually downloading the files again we can also take the same files directly from the ath10k-firmware git which was cloned before. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* linux-firmware: pack Intel iwl FW separatelyHauke Mehrtens2017-09-171-157/+120
| | | | | | | | | | | | Do not create one big package with all the Intel firmware files supported by the iwlwifi driver, but use a separate package for each chip. This also updates some 7000 and 8000 series firmware files to more recent version. The older versions shipped are not supported by the current driver any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* linux-firmware: update to the commit from 2017-09-06Henryk Heisig2017-09-171-3/+3
| | | | | | | | update firmware mrvl/sd8887_uapsta.bin Signed-off-by: Henryk Heisig <hyniu@o2.pl> [update to version 2017-09-06] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-firmware: update qca9887 firmware to 10.2.4-1.0-00029Andreas Ziegler2017-08-231-4/+5
| | | | Signed-off-by: Andreas Ziegler <github@andreas-ziegler.de>
* ath10k-firmware: add qca9888 firmwareJohn Crispin2017-06-271-0/+19
| | | | | | | | | ath10k-firmware: add qca9888 firmware the firmware files for qca9888 were previously not packaged. add the meta information for doing so. Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: qca99xx: fix wifi calibrationPavel Kubelun2017-06-171-6/+0
| | | | | | | | | | As of now OTP is being correctly parsed and the driver requires to parse pre-caldata to follow corresponding routine. Rename cal file into pre-calfile so the board initialized correctly with API 2 board data (board-2.bin). Also remove the now unneeded for qca9984 board.bin symlink to 5GHz calfile. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* linux-firmware: add firmware for rtl8821ae supportHans Ulli Kroll2017-05-211-0/+8
| | | | | | Add needed firmware to support rtl8821ae pcie adapter Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
* ath10k-ct-firmware: Add support for QCA9886/QCA9888 firmware.Ben Greear2017-05-181-0/+36
| | | | | | | | | This firmware shoul have the same general feature set as the rest of the 10.4 CT firmware (9984, 9980, etc). Build-tested only in LEDE, but firmware has been tested with ath10k-ct driver on other OSs, so likely works just fine. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct-firmware: Update to latest.Ben Greear2017-05-181-8/+8
| | | | | | | | | | | The 988x and 9887 firmwares include a bugfix for a case where blockack did not work sometimes, and many fixes for compiler warnings detected by newer gcc compilers. The 9980 and 9984 firmware includes a large backport of upstream QCA firmware changes to bring it up to date. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-firmware: update to latest versionPavel Kubelun2017-04-121-25/+2
| | | | | | Kvalo's repo has a newer version of qca9984 firmware. Use it instead. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* firmware: rework fritz-tools packageMathias Kresin2017-04-085-726/+0
| | | | | | | | | | | | | | | | Split the fritz-tools into subpackages. fritz_tffs_read is usefull for all Fritz boards where fritz-cal_extract is only required for the Fritz 4040 at the moment. Rename the tffs related binary to the more catchy name fritz_tffs and move the whole package to utilities since the package doesn't really provide a firmware file. Make the fritz-tools available for all targets and build them shared. The tffs is used by avm on lantiq and ar71xx as well. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath10k-firmware: update the qca988x firmware to 10.2.4-1.0-00029Changmin Jang2017-04-041-4/+4
| | | | | | | | update the qca988x firmware to firmware-5.bin_10.2.4-1.0-00029. According to LEDE Forum, the new firmware supports mesh mode. Also, it seems to have several improvements. Signed-off-by: Changmin Jang <ckdalsdk12@gmail.com>
* ath10k-firmware: do not select the qca988x by defaultMathias Kresin2017-03-241-1/+0
| | | | | | | | Do not select the qca988x by default as soon as kmod-ath10k is selected. We do support more ath10k chips than the qca988x in the meantime, so this dependency doesn't make sense any longer. Signed-off-by: Mathias Kresin <dev@kresin.me>
* firmware: add custom IPQ wifi board definitionsChristian Lamparter2017-03-224-0/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the ath10k-devel ML Michael Kazior stated: "board-2 is a key-value store of actual board files. Some devices, notably qca61x4 hw3+ and qca4019 need distinct board files to be uploaded. Otherwise they fail in various ways." [0]. Later on Rajkumar Manoharan explained: "In QCA4019 platform, only radio specific calibration (pre-cal-data) is stored in flash. Board specific contents are read from board-2.bin. For each radio appropriate board data should be loaded. To fetch correct board data from board-2.bin bundle, pre-cal/radio specific caldata should be loaded first to get proper board id. |My understanding until now was that: | | * pre-cal data + board-2.bin info == actual calibration data Correct." [1]. The standard board-2.bin from the ath10k-firmware-qca4019 barely works on the RT-AC58U. Especially 5GHz clients fail to connect at all and if they do, they have very low throughput even right next to the router. Currently, the solution for this problem is to supply a custom board-2.bin for every device. To implement this feature, this method makes use of: Rafał Miłecki's "base-files: add support for overlaying rootfs content". This comes with a few limitations: 1. Since there can only be one board-2.bin at the right location, there can only one board overwrite installed at any time. (All packages CONFLICT with each other. It's also not possible to "builtin" multiple package.) 2. updating ath10k-firmware-qca4019 will also replace the board-2.bin. For this cases the user needs to manually reinstall the wifi-board package once the ath10k-firmware-qca4019 is updated. To create the individual board-2.bin: Use the ath10k-bdencoder utility from the qca-swiss-army-knife repository: <https://github.com/qca/qca-swiss-army-knife> The raw board.bin files have to be extracted from the vendor's source GPL.tar archieves. Signed-off-by: Alexis Green <agreen@cococorp.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
* firmware: add IPQ fritz-tools FW extraction toolChristian Lamparter2017-03-225-0/+726
| | | | | | | Adds tools to access tffs3 and pre-calibration data required for ipq4019 based FritBoxes. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
* ath10k-firmware: firmware package for QCA4019 devicesChristian Lamparter2017-03-221-0/+18
| | | | | | | This patch adds a new firmware package to ath10k-firmware called ath10k-firmware-qca4019. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath10k-firmware: bump to latest versionChristian Lamparter2017-03-221-3/+3
| | | | Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: add support for Marvell 802.11n/802.11ac SDIO Wireless cardsHenryk Heisig2017-03-111-0/+9
| | | | | | | This adds option to build kernel module and firmware packages for a Marvell 8887 SDIO Wireless device Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ath10k-firmware: update qca9984 firmwarePavel Kubelun2017-03-031-3/+3
| | | | | | Bump qca9984 firmware. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ath10k-firmware: update qca9984 firmwarePavel Kubelun2017-02-141-3/+3
| | | | | | Bump qca9984 firmware. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ath10k-firmware: revert faulty PKG_SOURCE_DATE change from 7cb27b46Felix Fietkau2017-02-011-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-firmware: update qca9984 firmware and board dataPavel Kubelun2017-02-011-5/+5
| | | | | | | | Fixes firmware crash in rare cases and a bug ath10k_pci 0001:01:00.0: received unexpected tx_fetch_ind event: in push mode for those who kept experiencing it after previous firmware update. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ath10k-ct: Support ath10k CT firmware for 9887 chipsets.Ben Greear2017-02-011-3/+41
| | | | | | | | | | | And, update support for 9880 chipsets. The new firmware fixes a regression with EAPOL 4/4 packets added in a recent commit. It also fixes a case where the firmware would improperly try to use STBC when configured for 1x1 (as 9887 always is). Signed-off-by: Ben Greear <greearb@candelatech.com>
* layerscape: put u-boot and ucode images into image staging directoryJo-Philipp Wich2017-01-272-2/+4
| | | | | | | | | | | | Do not put the u-boot and ucode images into the kernel build directory as this directory might get removed after kernel updates while the u-boot packages InstallDev recipe is not getting re-executed because it is still considered current, leading to image build failures later on due to missing images. To ensure that built bootloader images persist over kernel version updates in the buildroot, put them into the new STAGING_DIR_IMAGE directory. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* packages: mark packages depending on a target as nonsharedMathias Kresin2017-01-243-0/+6
| | | | | | | | | The packages can't be build as shared packages due to the unmet dependencies. Fixes FS#418. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath10k-firmware: Update QCA988X firmware to latest versionTimo Sigurdsson2017-01-151-4/+4
| | | | | | | | | | This patch updates the QCA988X firmware to the latest revision firmware-5.bin_10.2.4-1.0-00016 found in the official ath10k-firmware repository. Tested on TP-Link Archer C7 v2. Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
* ath10k-fw: Update to latest CT firmwareBen Greear2017-01-131-7/+7
| | | | | | | | | For 988X, 9980, 9984 CT firmware. This should allow IBSS + RSN on at least the 988X firmware, and includes recent stability fixes for all firmware. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-firmware: update board data for qca9984Pavel Kubelun2017-01-101-1/+12
| | | | | | | | | | | Current board-2.bin file for qca9984 in Kvalo's repo is from branch 10.4-3.2, while board-2.bin file in code-aurora repo is newer and corresponds to the branch 10.4-3.3, the same as recently updated firmware. Considering that it's better to have all parts from the same branch we are updating board-2.bin as well. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* generic: package Broadcom BNX2 driverGeorge Amanakis2017-01-021-0/+9
| | | | | | | bnx2 driver support for the x86 architecture. Includes module and firmware for Broadcom BCM5706/5708/5709/5716 ethernet adapters. Signed-off-by: George Amanakis <g_amanakis@yahoo.com>
* treewide: clean up and unify PKG_VERSION for git based downloadsFelix Fietkau2016-12-226-24/+11
| | | | | | Also use default defintions for PKG_SOURCE_SUBDIR, PKG_SOURCE Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Revert "linux-firmware: Add mirrors"Felix Fietkau2016-12-221-3/+1
| | | | | | | | This reverts commit 0d4f02dfd650612aac6c11860139be03a0f54bee, which was obviously untested. git downloads cannot handle multiple URLs at the moment. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-firmware: update qca9984 firmwarePavel Kubelun2016-12-221-1/+13
| | | | | | | | | | | | | | | | | | A new firmware that is available on code-aurora repository is newer than in Kvalo's repo. Taking into account that firmwares that are in Kvalo's repo are considered to be tested by internal QCA team, this one seems to be more stable and fixes this bug: ath10k_pci 0000:01:00.0: received unexpected tx_fetch_ind event: in push mode At least i havent faced it for a while in contradiction to current version. Thus switching firmware source for qca9984 until it or a newer version gets into Kvalo's repo. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ath10k-firmware: fix missing variable renames (FS#341)Felix Fietkau2016-12-221-2/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-firmware: bump qca988x versionKevin Darbyshire-Bryant2016-12-201-4/+4
| | | | | | | | Bump qca988x firmware to firmware-5.bin_10.2.4.70.59-2 Run tested: Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* firmware: add support for PCMCIA Aircard'sTomasz Maciej Nowak2016-12-201-0/+10
| | | | | | | | | | | | | | | Add .cis firmware for Sierra Wireless Aircard GPRS/3G PCMCIA modems: - Aircard 555 - Aircards 7xx - Aircards 8x0 There is a package named sierra-pcmcia in obsoleted repository for packages at git.openwrt.org but there's no reason to reintroduce it in current packages repo because these files are part of upstream linux-firmware. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* treewide: clean up download hashesFelix Fietkau2016-12-1611-20/+23
| | | | | | Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-firmware: fix typoFelix Fietkau2016-12-161-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-firmware: untangle CT firmware filenames, fix conflictsFelix Fietkau2016-12-161-13/+17
| | | | | | | | | CT firmware files use the same filename with a different URL for different chips. Since all files end up in dl/, filenames need to be unique as well. Add a chip prefix to the output filename to fix this issue. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-firmware: removed broken submenuAlberto Bursi2016-12-141-1/+0
| | | | | | | this package references an undefined variable for its submenu. Remove this NOP variable assignment. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* ar71xx: remove AP83 reference design board supportFelix Fietkau2016-12-121-29/+1
| | | | | | | | This board is very old and unlikely to still be relevant today. Support for it contains a significant amount of device specific baggage which is worth getting rid of. Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 21:40:09 +0000