aboutsummaryrefslogtreecommitdiffstats
path: root/package/firmware
Commit message (Collapse)AuthorAgeFilesLines
* firmware: intel-microcode: update to 20200616Tan Zien2020-10-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | intel-microcode (3.20200616.1) * New upstream microcode datafile 20200616 + Downgraded microcodes (to a previously shipped revision): sig 0x000406e3, pf_mask 0xc0, 2019-10-03, rev 0x00d6, size 101376 sig 0x000506e3, pf_mask 0x36, 2019-10-03, rev 0x00d6, size 101376 * Works around hangs on boot on Skylake-U/Y and Skylake Xeon E3, * This update *removes* the SRBDS mitigations from the above processors * Note that Debian had already downgraded 0x406e3 in release 3.20200609.2 intel-microcode (3.20200609.2) * REGRESSION FIX: 0x406e3: rollback to rev 0xd6 and document regression * Microcode rollbacks (closes: LP#1883002) sig 0x000406e3, pf_mask 0xc0, 2019-10-03, rev 0x00d6, size 101376 * THIS REMOVES THE SECURITY FIXES FOR SKYLAKE-U/Y PROCESSORS * Avoid hangs on boot on (some?) Skylake-U/Y processors, * ucode-blacklist: blacklist models 0x8e and 0x9e from late-loading, just in case. Note that Debian does not do late loading by itself. Refer to LP#1883002 for the report, 0x806ec hangs upon late load. intel-microcode (3.20200609.1) * SECURITY UPDATE * For most processors: SRBDS and/or VRDS, L1DCES mitigations depending on the processor model * For Skylake HEDT and Skylake Xeons with signature 0x50654: VRDS and L1DCES mitigations, plus mitigations described in the changelog entry for package release 3.20191112.1. * Expect some performance impact, the mitigations are enabled by default. A Linux kernel update will be issued that allows one to selectively disable the mitigations. * New upstream microcode datafile 20200609 * Implements mitigation for CVE-2020-0543 Special Register Buffer Data Sampling (SRBDS), INTEL-SA-00320, CROSSTalk * Implements mitigation for CVE-2020-0548 Vector Register Data Sampling (VRDS), INTEL-SA-00329 * Implements mitigation for CVE-2020-0549 L1D Cache Eviction Sampling (L1DCES), INTEL-SA-00329 * Known to fix the regression introduced in release 2019-11-12 (sig 0x50564, rev. 0x2000065), which would cause several systems with Skylake Xeon, Skylake HEDT processors to hang while rebooting * Updated Microcodes: sig 0x000306c3, pf_mask 0x32, 2019-11-12, rev 0x0028, size 23552 sig 0x000306d4, pf_mask 0xc0, 2019-11-12, rev 0x002f, size 19456 sig 0x00040651, pf_mask 0x72, 2019-11-12, rev 0x0026, size 22528 sig 0x00040661, pf_mask 0x32, 2019-11-12, rev 0x001c, size 25600 sig 0x00040671, pf_mask 0x22, 2019-11-12, rev 0x0022, size 14336 sig 0x000406e3, pf_mask 0xc0, 2020-04-27, rev 0x00dc, size 104448 sig 0x00050653, pf_mask 0x97, 2020-04-24, rev 0x1000157, size 32768 sig 0x00050654, pf_mask 0xb7, 2020-04-24, rev 0x2006906, size 34816 sig 0x00050656, pf_mask 0xbf, 2020-04-23, rev 0x4002f01, size 52224 sig 0x00050657, pf_mask 0xbf, 2020-04-23, rev 0x5002f01, size 52224 sig 0x000506e3, pf_mask 0x36, 2020-04-27, rev 0x00dc, size 104448 sig 0x000806e9, pf_mask 0x10, 2020-04-27, rev 0x00d6, size 103424 sig 0x000806e9, pf_mask 0xc0, 2020-04-27, rev 0x00d6, size 103424 sig 0x000806ea, pf_mask 0xc0, 2020-04-27, rev 0x00d6, size 103424 sig 0x000806eb, pf_mask 0xd0, 2020-04-27, rev 0x00d6, size 103424 sig 0x000806ec, pf_mask 0x94, 2020-04-23, rev 0x00d6, size 103424 sig 0x000906e9, pf_mask 0x2a, 2020-04-23, rev 0x00d6, size 103424 sig 0x000906ea, pf_mask 0x22, 2020-04-27, rev 0x00d6, size 102400 sig 0x000906eb, pf_mask 0x02, 2020-04-23, rev 0x00d6, size 103424 sig 0x000906ec, pf_mask 0x22, 2020-04-27, rev 0x00d6, size 102400 sig 0x000906ed, pf_mask 0x22, 2020-04-23, rev 0x00d6, size 103424 * Restores the microcode-level fixes that were reverted by release 3.20191115.2 for sig 0x50654 (Skylake Xeon, Skylake HEDT) intel-microcode (3.20200520.1) * New upstream microcode datafile 20200520 + Updated Microcodes: sig 0x000206d6, pf_mask 0x6d, 2020-03-04, rev 0x0621, size 18432 sig 0x000206d7, pf_mask 0x6d, 2020-03-24, rev 0x071a, size 19456 intel-microcode (3.20200508.1) * New upstream microcode datafile 20200508 + Updated Microcodes: sig 0x000706e5, pf_mask 0x80, 2020-03-12, rev 0x0078, size 107520 * Likely fixes several critical errata on IceLake-U/Y causing system hangs intel-microcode (3.20191115.2) * Microcode rollbacks (closes: #946515, LP#1854764): sig 0x00050654, pf_mask 0xb7, 2019-07-31, rev 0x2000064, size 33792 * Avoids hangs on warm reboots (cold boots work fine) on HEDT and Xeon processors with signature 0x50654. intel-microcode (3.20191115.1) * New upstream microcode datafile 20191115 + Updated Microcodes: sig 0x000406e3, pf_mask 0xc0, 2019-10-03, rev 0x00d6, size 101376 sig 0x000506e3, pf_mask 0x36, 2019-10-03, rev 0x00d6, size 101376 sig 0x000806e9, pf_mask 0x10, 2019-10-15, rev 0x00ca, size 100352 sig 0x000806e9, pf_mask 0xc0, 2019-09-26, rev 0x00ca, size 100352 sig 0x000806ea, pf_mask 0xc0, 2019-10-03, rev 0x00ca, size 100352 sig 0x000806eb, pf_mask 0xd0, 2019-10-03, rev 0x00ca, size 100352 sig 0x000806ec, pf_mask 0x94, 2019-10-03, rev 0x00ca, size 100352 sig 0x000906e9, pf_mask 0x2a, 2019-10-03, rev 0x00ca, size 100352 sig 0x000906ea, pf_mask 0x22, 2019-10-03, rev 0x00ca, size 99328 sig 0x000906eb, pf_mask 0x02, 2019-10-03, rev 0x00ca, size 100352 sig 0x000906ec, pf_mask 0x22, 2019-10-03, rev 0x00ca, size 99328 sig 0x000906ed, pf_mask 0x22, 2019-10-03, rev 0x00ca, size 100352 sig 0x000a0660, pf_mask 0x80, 2019-10-03, rev 0x00ca, size 91136 intel-microcode (3.20191113.1) * New upstream microcode datafile 20191113 + SECURITY UPDATE, refer to the 3.20191112.1 changelog entry for details Adds microcode update for CFL-S (Coffe Lake Desktop) INTEL-SA-00270, CVE-2019-11135, CVE-2019-0117 + Updated Microcodes (previously removed): sig 0x000906ec, pf_mask 0x22, 2019-08-14, rev 0x00c6, size 99328 intel-microcode (3.20191112.1) * New upstream microcode datafile 20191112 + SECURITY UPDATE - Implements MDS mitigation (TSX TAA), INTEL-SA-00270, CVE-2019-11135 - Implements TA Indirect Sharing mitigation, and improves the MDS mitigation (VERW) - Fixes FIVR (Xeon Voltage Modulation) vulnerability, INTEL-SA-00271, CVE-2019-11139 - Fixes SGX vulnerabilities and errata (including CVE-2019-0117) + CRITICAL ERRATA FIXES - Fixes Jcc conditional jump macro-fusion erratum (Skylake+, except Ice Lake), causes a 0-3% typical perforance hit (can be as bad as 10%). But ensures the processor will actually jump where it should, so don't even *dream* of not applying this fix. - Fixes AVX SHUF* instruction implementation flaw erratum + Removed Microcodes: sig 0x000906ec, pf_mask 0x22, 2019-02-14, rev 0x00ae, size 98304 + New Microcodes: sig 0x000406d8, pf_mask 0x01, 2019-09-16, rev 0x012d, size 84992 sig 0x00050656, pf_mask 0xbf, 2019-09-05, rev 0x400002c, size 51200 sig 0x00060663, pf_mask 0x80, 2018-04-17, rev 0x002a, size 87040 sig 0x000706a8, pf_mask 0x01, 2019-08-29, rev 0x0016, size 74752 sig 0x000706e5, pf_mask 0x80, 2019-09-05, rev 0x0046, size 102400 sig 0x000a0660, pf_mask 0x80, 2019-08-27, rev 0x00c6, size 91136 + Updated Microcodes: sig 0x000406e3, pf_mask 0xc0, 2019-08-14, rev 0x00d4, size 101376 sig 0x00050654, pf_mask 0xb7, 2019-09-05, rev 0x2000065, size 34816 sig 0x00050657, pf_mask 0xbf, 2019-09-05, rev 0x500002c, size 51200 sig 0x000506e3, pf_mask 0x36, 2019-08-14, rev 0x00d4, size 101376 sig 0x000706a1, pf_mask 0x01, 2019-08-28, rev 0x0032, size 73728 sig 0x000806e9, pf_mask 0x10, 2019-08-14, rev 0x00c6, size 99328 sig 0x000806e9, pf_mask 0xc0, 2019-08-14, rev 0x00c6, size 100352 sig 0x000806ea, pf_mask 0xc0, 2019-08-14, rev 0x00c6, size 99328 sig 0x000806eb, pf_mask 0xd0, 2019-08-14, rev 0x00c6, size 100352 sig 0x000806ec, pf_mask 0x94, 2019-08-14, rev 0x00c6, size 100352 sig 0x000906e9, pf_mask 0x2a, 2019-08-14, rev 0x00c6, size 100352 sig 0x000906ea, pf_mask 0x22, 2019-08-14, rev 0x00c6, size 99328 sig 0x000906eb, pf_mask 0x02, 2019-08-14, rev 0x00c6, size 100352 sig 0x000906ed, pf_mask 0x22, 2019-08-14, rev 0x00c6, size 99328 + Updated Microcodes (previously removed): sig 0x00050653, pf_mask 0x97, 2019-09-09, rev 0x1000151, size 32768 Signed-off-by: Tan Zien <nabsdh9@gmail.com> (cherry picked from commit e826e007658911df91385935e74621889abbda24)
* firmware: amd64-microcode: update to 20191218Tan Zien2020-10-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | amd64-microcode (3.20191218.1) * New microcode update packages from AMD upstream: + Removed Microcode updates (known to cause issues): sig 0x00830f10, patch id 0x08301025, 2019-07-11 * README: update for new release amd64-microcode (3.20191021.1) * New microcode update packages from AMD upstream: + New Microcodes: sig 0x00830f10, patch id 0x08301025, 2019-07-11 + Updated Microcodes: sig 0x00800f12, patch id 0x08001250, 2019-04-16 sig 0x00800f82, patch id 0x0800820d, 2019-04-16 amd64-microcode (3.20181128.1) * New microcode update packages from AMD upstream: + New Microcodes: sig 0x00800f82, patch id 0x0800820b, 2018-06-20 Signed-off-by: Tan Zien <nabsdh9@gmail.com> (cherry picked from commit 182c7d955f872cb712f6d16d4b5cc0824bf4cc67)
* ath10k-ct-firmware: update firmware imagesMichael Yartys2020-09-061-21/+21
| | | | | | | | | | | | | | | | Not a large change from last time, but should fix at least one rare wave-2 crash. Tested on Netgear R7800. Signed-off-by: Michael Yartys <michael.yartys@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 91aab77bf1ce91b0e60e720eb147c94a02c1f2fd) [adapt variables and package names] [remove changes to non-full htt-mgt variants because we did not backport a882bfce052e ("ath10k-ct-firmware: add htt-mgt variants")] Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org> Tested-by: Baptiste Jonglez <git@bitsofnetworks.org> [QCA9886, QCA9887]
* ath10k-ct-firmware: update firmware imagesÁlvaro Fernández Rojas2020-09-061-25/+25
| | | | | | | | | | No release notes this time. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 06f510df6e2aa0b1e40124bbd758672458d01482) [adapt variables and package names because we did not backport 2e5e9b459ed5 ("ath10k-ct-firmware: rename ct-htt packages")] Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* ath10k-firmware: move CT firmwares to new packageÁlvaro Fernández Rojas2020-09-062-446/+524
| | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 658e68f85c2645e0132edc6b30a9c76cc17292de)
* ath10k-firmware: update ath10k-ct firmware imagesÁlvaro Fernández Rojas2020-09-061-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Release notes for 017: Wave-1: * March 19, 2020: Fix problem where power-save was not enabled when going off-channel to scan. The problem was a boolean logic inversion in the chmgr code, a regression I introduced a long time ago. * March 19, 2020: When scanning only on current working channel, do not bother with disable/enable powersave. This should make an on-channel scan less obtrusive than it was previously. * March 23, 2020: Fix channel-mgr use-after-free problem that caused crashes in some cases. The crash was exacerbated by recent power-save changes. * March 23, 2020: Fix station-mode power-save related crash: backported the fix from 10.2 QCA firmware. * March 23, 2020: Attempt to better clean up power-save objects and state, especially in station mode. Release notes for 016: Wave-1 changes, some debugging code for a crash someone reported, plus: * February 28, 2020: Fix custom-tx path when sending in 0x0 for rate-code. Have tries == 0 mean one try but NO-ACK (similar to how wave-2 does it). wave-2: * Fixed some long-ago regressions related to powersave and/or multicast. Maybe fix some additional multicast and/or tx-scheduling bugs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 84f4a783c6987fd9d67c089a76e2f90b7491f446)
* ath10k-firmware: update ath10k-ct firmwareMichael Yartys2020-09-061-24/+24
| | | | | | | | | | | | | | | This supports better per-chain noise floor reporting, which in turn allows for better RSSI reporting in the driver. Wave-2 fixes a long-standing rate-ctrl problem when connected to xbox (and probably other devices). Wave-2 has fix for crash likely related to rekeying. Wave-1 has some debugging code added where a user reported a crash. Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ipq806x+qca9984,ipq4019+qca9986] Signed-off-by: Michael Yartys <michael.yartys@protonmail.com> (cherry picked from commit 18622638831707038556b9b8bd5a0b4d4a53ce53)
* ath10k-firmware: update Candela Tech firmware imagesStefan Lippers-Hollmann2020-09-061-20/+20
| | | | | | | | | | | | | | | | | | The release notes since last time for wave-1: * No changes to wave-1, but I make a version .014 copy anyway to keep the makefile in sync. The release notes since last time for wave-2: * December 16, 2019: Wave-2 has a fix to make setting txpower work better. Before setting the power was ignored at least some of the time (it also appeared to work mostly, so I guess it was being correctly set in other ways). Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> (cherry picked from commit 65982642668e859540b21c2bd3bf907493df830a)
* ath10k-firmware: fix mirror hashDENG Qingfang2020-05-081-1/+1
| | | | | | | | | | Fix PKG_MIRROR_HASH hash mismatch. Fixes: 641a93f0f226 ("ath10k-firmware: update wave 1 firmware to 10.2.4-1.0-00047") Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> [added missing commit description] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 2d758129ca000620ab07f78e774464a96e8f212d)
* wireless-regdb: backport three upstream fixesPetr Štetiar2020-05-014-0/+935
| | | | | | | | | Another release is overdue for quite some time, so I'm backporting three fixes from upstream which I plan to backport into 19.07 as well. Ref: FS#2880 Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 76a0ddf1308782a4da2693978955aee9cf631862)
* ath10k-firmware: Add kmod-ath10k-ct-smallbuffers to dependsHauke Mehrtens2019-12-241-6/+6
| | | | | | | | Only select ath10k-ct-regular when smallbuffers version was not selected. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 80f06cb601160534f20e61d476dcedba77d5a47d)
* ath10k-firmware: update Candela Tech firmware imagesKoen Vandeputte2019-12-101-24/+24
| | | | | | | | | | | | | | | The release notes since last time for wave-1: * November 29, 2019: Fix IBSS merge issue, related to TSF id leakage bug in firmware code. Thanks for Ahmed Zaki @ Mage-Networks for helping to diagnose and test. The release notes since last time for wave-2: * December 6, 2019: Fix 160Mhz problem caused by logic that did not take into account the fact that 160Mhz has only 1/2 of the NSS of lower bandwidths in the rate table. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit 30109782df3c74becd60dd13216346e1ea2fcc96)
* ipq-wifi: add AVM FRITZ!Repeater 1200 bdfDavid Bauer2019-11-222-0/+2
| | | | | | Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit c0f40781645297ad68678e3de2557b611e9f785c) Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* wireless-regdb: fix build when python2 from package feeds existsPetr Štetiar2019-11-221-1/+1
| | | | | | | | | | | | | | | | wireless-regdb fails to build if there is python2 installed from package feeds, as staging_dir/hostpkg/bin/python is python2 and staging_dir/hostpkg/bin takes precedence over staging_dir/host/bin (proper place with python -> python3 symlink) which leads to the build failure of wireless-regdb, so this patch makes it explicit which python should be used. Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Tested-by: Russell Senior <russell@personaltelco.net> Tested-by: Lucian Cristian <lucian.cristian@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit b6bae4a2c9f11f7e55319c2b4c709396ce649688)
* wireless-regdb: fix patch fuzzKevin Darbyshire-Bryant2019-11-221-1/+1
| | | | | | | Refresh patches to tidy up some fuzz warnings Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 12840674d0550e6f5aa077cd2b578988f0c07074)
* wireless-regdb: fix Makefile indentationJohn Crispin2019-11-221-5/+5
| | | | | Signed-off-by: John Crispin <john@phrozen.org> (cherry picked from commit 8562e77953e76c1ec7ba01ce18dc468d5628f3dc)
* wireless-regdb: set PKGARCH:=allPetr Štetiar2019-11-221-0/+1
| | | | | | | | | As it's an architecture-independent binary file. Ref: https://github.com/openwrt/openwrt/pull/1521#issuecomment-514687053 Suggested-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 57d1c05ec945b4853708d686c0782c4b1dcff0a9)
* wireless-regdb: prefer python provided by make variablePetr Štetiar2019-11-221-1/+1
| | | | | | | Usage of predefined make variables is preferred. Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit d3853d17a37a67541736b8b13f412a49ab382b9a)
* wireless-regdb: Make it build with python2Hauke Mehrtens2019-11-221-0/+58
| | | | | | | | | This backports a patch to build it work with python2 in addition to python3. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit d3a8a62692b06b3e5fe7077a2ce641fbf09cdc19)
* wireless-regdb: update to 2019.06.03Zachary Riedlshah2019-11-222-260/+8
| | | | | | | | | | | | | | | Fixes build issues on a python3 host (issues with the print statement formatting in the current build). Includes 100-regdb-write-firmware-file-format-version-code-20.patch and other fixes. Closes bugs.openwrt.org/index.php?do=details&task_id=1605. Uses the tarball as requested. Signed-off-by: Zachary Riedlshah <git@zacharyrs.me> (cherry picked from commit ef3f868da0d78adf2490a762ff567cf5b636c213)
* firmware: intel-microcode: bump to 20190918Zoltan HERPAI2019-11-111-2/+2
| | | | | | | | | | | | | | | | | | | | * New upstream microcode datafile 20190918 *Might* contain mitigations for INTEL-SA-00247 (RAMBleed), given the set of processors being updated. * Updated Microcodes: sig 0x000306d4, pf_mask 0xc0, 2019-06-13, rev 0x002e, size 19456 sig 0x000306f4, pf_mask 0x80, 2019-06-17, rev 0x0016, size 18432 sig 0x00040671, pf_mask 0x22, 2019-06-13, rev 0x0021, size 14336 sig 0x000406f1, pf_mask 0xef, 2019-06-18, rev 0xb000038, size 30720 sig 0x00050654, pf_mask 0xb7, 2019-07-31, rev 0x2000064, size 33792 sig 0x00050657, pf_mask 0xbf, 2019-08-12, rev 0x500002b, size 51200 sig 0x00050662, pf_mask 0x10, 2019-06-17, rev 0x001c, size 32768 sig 0x00050663, pf_mask 0x10, 2019-06-17, rev 0x7000019, size 24576 sig 0x00050664, pf_mask 0x10, 2019-06-17, rev 0xf000017, size 24576 sig 0x00050665, pf_mask 0x10, 2019-06-17, rev 0xe00000f, size 19456 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* firmware: intel-microcode: bump to 20190618Zoltan HERPAI2019-11-111-2/+2
| | | | | | | | | | * Implements MDS mitigation (RIDL, Fallout, Zombieload), INTEL-SA-00223 CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091 * Updated Microcodes: sig 0x000206d6, pf_mask 0x6d, 2019-05-21, rev 0x061f, size 18432 sig 0x000206d7, pf_mask 0x6d, 2019-05-21, rev 0x0718, size 19456 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* firmware: intel-microcode: bump to 20190514Zoltan HERPAI2019-11-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * New Microcodes: sig 0x00030678, pf_mask 0x02, 2019-04-22, rev 0x0838, size 52224 sig 0x00030678, pf_mask 0x0c, 2019-04-22, rev 0x0838, size 52224 sig 0x00030679, pf_mask 0x0f, 2019-04-23, rev 0x090c, size 52224 sig 0x000406c3, pf_mask 0x01, 2019-04-23, rev 0x0368, size 69632 sig 0x000406c4, pf_mask 0x01, 2019-04-23, rev 0x0411, size 68608 sig 0x00050657, pf_mask 0xbf, 2019-02-27, rev 0x5000021, size 47104 sig 0x000806e9, pf_mask 0x10, 2018-10-18, rev 0x009e, size 98304 sig 0x000806eb, pf_mask 0xd0, 2018-10-25, rev 0x00a4, size 99328 sig 0x000806ec, pf_mask 0x94, 2019-02-12, rev 0x00b2, size 98304 sig 0x000906ec, pf_mask 0x22, 2018-09-29, rev 0x00a2, size 98304 sig 0x000906ed, pf_mask 0x22, 2019-02-04, rev 0x00b0, size 97280 * Updated Microcodes: sig 0x000206a7, pf_mask 0x12, 2019-02-17, rev 0x002f, size 12288 sig 0x000306a9, pf_mask 0x12, 2019-02-13, rev 0x0021, size 14336 sig 0x000306c3, pf_mask 0x32, 2019-02-26, rev 0x0027, size 23552 sig 0x000306d4, pf_mask 0xc0, 2019-03-07, rev 0x002d, size 19456 sig 0x000306e4, pf_mask 0xed, 2019-03-14, rev 0x042e, size 16384 sig 0x000306e7, pf_mask 0xed, 2019-03-14, rev 0x0715, size 17408 sig 0x000306f2, pf_mask 0x6f, 2019-03-01, rev 0x0043, size 34816 sig 0x000306f4, pf_mask 0x80, 2019-03-01, rev 0x0014, size 18432 sig 0x00040651, pf_mask 0x72, 2019-02-26, rev 0x0025, size 21504 sig 0x00040661, pf_mask 0x32, 2019-02-26, rev 0x001b, size 25600 sig 0x00040671, pf_mask 0x22, 2019-03-07, rev 0x0020, size 14336 sig 0x000406e3, pf_mask 0xc0, 2019-04-01, rev 0x00cc, size 100352 sig 0x000406f1, pf_mask 0xef, 2019-03-02, rev 0xb000036, size 30720 sig 0x00050654, pf_mask 0xb7, 2019-04-02, rev 0x200005e, size 32768 sig 0x00050662, pf_mask 0x10, 2019-03-23, rev 0x001a, size 32768 sig 0x00050663, pf_mask 0x10, 2019-03-23, rev 0x7000017, size 24576 sig 0x00050664, pf_mask 0x10, 2019-03-23, rev 0xf000015, size 23552 sig 0x00050665, pf_mask 0x10, 2019-03-23, rev 0xe00000d, size 19456 sig 0x000506c9, pf_mask 0x03, 2019-01-15, rev 0x0038, size 17408 sig 0x000506ca, pf_mask 0x03, 2019-03-01, rev 0x0016, size 15360 sig 0x000506e3, pf_mask 0x36, 2019-04-01, rev 0x00cc, size 100352 sig 0x000506f1, pf_mask 0x01, 2019-03-21, rev 0x002e, size 11264 sig 0x000706a1, pf_mask 0x01, 2019-01-02, rev 0x002e, size 73728 sig 0x000806e9, pf_mask 0x10, 2019-04-01, rev 0x00b4, size 98304 sig 0x000806e9, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328 sig 0x000806ea, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328 sig 0x000806eb, pf_mask 0xd0, 2019-03-30, rev 0x00b8, size 98304 sig 0x000806ec, pf_mask 0x94, 2019-03-30, rev 0x00b8, size 97280 sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906ea, pf_mask 0x22, 2019-04-01, rev 0x00b4, size 98304 sig 0x000906eb, pf_mask 0x02, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906ec, pf_mask 0x22, 2019-02-14, rev 0x00ae, size 98304 sig 0x000906ed, pf_mask 0x22, 2019-03-17, rev 0x00b8, size 97280 * Implements MDS mitigation (RIDL, Fallout, Zombieload), INTEL-SA-00223 CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ath10k-firmware: update Candela Tech firmware imagesKoen Vandeputte2019-11-051-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The release notes since last time for wave-1: * October 5, 2019: Fix too-short msg caused by invalid use of PayloadLen in receive path. This appears to resolve the issue of getting (and ignoring) too-short commands when we detect loss of CE interrupts and go into polling mode. * October 12, 2019: Fix regression in IBSS mode that caused SWBA overrun issues. Related to regression added during the ct-station logic, specifically TSF allocation. Thanks for Ahmed Zaki @ Mage-Networks for helping to diagnose and test. * October 15, 2019: Only send beacon tx completion events if we can detect CT driver is being used (based on CT_STATS_OK flag being set). This should help CT firmware work better on stock driver. The release notes since last time for wave-2: * October 15, 2019: Only send beacon tx completion events if we can detect CT driver is being used (based on ATH10k_USE_TXCOMPL_TXRATE2 | ATH10k_USE_TXCOMPL_TXRATE1 flags being set). This should help CT firmware work better on stock driver. * October 31, 2019: Compile out peer-ratecode-list-event. ath10k driver ignores the event. * November 1, 2019: Fix rate-ctrl related crash when nss and other things were changed while station stays associated. See bug: https://github.com/greearb/ath10k-ct/issues/96 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit e716e93a2f7290086f49992c9980773c88100c3a)
* ath10k-firmware: update wave 1 firmware to 10.2.4-1.0-00047David Bauer2019-10-271-5/+5
| | | | | | | | | This fixes frequent crashes observed on a UniFi AC Mesh using OpenWrt master and 19.07. 18.06 seems not affected from our testing. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 641a93f0f226aa1b4e27bc6f1fc36f9fe63a11a0) Signed-off-by: David Bauer <mail@david-bauer.net>
* ath10k-firmware: retrieve wave 1 firmware from kvaloDavid Bauer2019-10-272-4/+4
| | | | | | | | | | | | | | | This commit changes the source of the Wave 1 ath10k-firmware from linux-firmware to Kall Valos ath10k-firmware repository. This is necessary as the firmware selected in linux-firmware produces frequent crashes in some circumstances. This patch can be removed as soon as linux-firmware carries 10.2.4-1.0-00047 firmware. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit a3914783a32d4fe3612383391cd72638931f1cea) Signed-off-by: David Bauer <mail@david-bauer.net>
* ath10k-firmware: update Candela Tech firmware imagesRobert Marko2019-09-241-20/+20
| | | | | | | | This enables a feature flag in the wave-2 firmware wmi-services indicating it can send software-encrypted raw frames. This should in turn allow the AP-VLAN feature to work. Signed-off-by: Robert Marko <robimarko@gmail.com> (cherry picked from commit 7c930990af911f6634b422d7253f09df2bb164bf)
* ath10k-firmware: update Candela Tech firmware imagesKoen Vandeputte2019-08-271-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | This should fix a problem with 1560 MTU, 160Mhz on DFS channels, some other small issues on < 5.2 kernels, and for 5.2 driver, it pulls in some upstream stable fixes. wave-1 firmware changes since last update: * June 24, 2019: Try allocating low-priority WMI msgs if high-prio are not available. * June 24, 2019: Init rate-ctrl to start at lowest rate instead of in the middle. Hoping this helps DHCP when station connects from a long distance. wave-2: * June 24, 2019 Start rate-ctrl at minimal values to help DHCP work better for far-away peers. * July 24, 2019 Fix old regression that made /a (and probably /b/g) perform poorly, at least on diet-compiled images. * Aug 8, 2019 Improve a/b/g rate-ctrl by damping the PER swings caused by the all-or-nothing logic of transmitting non-block-ack frames one at a time. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit de5f0764883ad6a0767da58d7359f3e01aa91139)
* ath10k-firmware: Fix mirror hashHauke Mehrtens2019-08-271-1/+1
| | | | | | Fixes: 7f79882d44ba ("ath10k-firmware: update board-2.bin for community firmwares") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 7c640c2960dbc0a14784a50bc88c92a4b29c0446)
* ath10k-firmware: update board-2.bin for community firmwaresChristian Lamparter2019-08-271-3/+3
| | | | | | | | | This patch updates the board-2.bin for the default IPQ4019, QCA9984 and QCA9888 ath10k-firmware-xyz-ct and -ct-htt firmwares. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 7f79882d44baf7d63fd6f2040deb4fca8e78fb24)
* ath10k-firmware: update Candela Tech firmware imagesKevin Darbyshire-Bryant2019-08-271-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | wave-1: 2019-05-09: Tweak rate-ctrl: Ramp PER up faster, down slower. This helps throughput in rate-vs-range test, especially with nss1. 2019-05-20: Disable adaptive-CCA. I am not sure it helps, and it may make it slower to detect noise that should tell the system to stop transmitting. If someone has means to test this properly, I'd be happy to work with them. wave-2: 2019-05-15: Fix problem where rate-ctrl sometimes used rix of 0x0. 2019-05-15: Allow raw-tx of encrypted frame. Requires a patch to the driver to use raw mode when skb has WEP flag enabled AND skb is flagged to not be encrypted. Lightly tested. 2019-05-16: Fix tx-hang that happened when rate-ctrl chose an OFDM rate for 20Mhz and sent that as AMPDU. To fix, limit to (V)HT rates if peer is (V)HT. It seems that MCS0 (V)HT20 should have as good of a chance of being detected as CCK or OFDM. 2019-06-06: Disable TX-BFEE, TX-BFER for IBSS connections. I suspect this is part of the tx-hang issue seen with IBSS between two 9984 radios. 2019-06-12: Fix rx-rate reporting in 'fw_stats' logic. This was at least partly due to regressions I had added earlier when working on some multi-vdev enhancements. 2019-6-12: Fix case where extd peer-stats were not always populated. The stats gathering code did not handle error conditions well. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit ff2382e36c689b821934060acb0cfe094bc5a935)
* layerscape: drop ppa packageYangbo Lu2019-06-061-84/+0
| | | | | | Drop ppa package since TF-A is used instead. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: convert to use TF-A for firmwareBiwen Li2019-06-061-3/+3
| | | | | | | | | | This patch is to convert to use TF-A for firmware. - Use un-swapped rcw since swapping will be done in TF-A. - Use u-boot with TF-A defconfig. - Rework memory map for TF-A introduction. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add rcw packages for ls1043ardb/ls1046ardb SD bootBiwen Li2019-06-061-0/+12
| | | | | | | Add rcw packages for ls1043ardb/ls1046ardb SD boot. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ppfe-firmware to LSDK 19.03Biwen Li2019-06-061-3/+3
| | | | | | | Update ppfe-firmware to LSDK 19.03. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ls-rcw to LSDK 19.03Biwen Li2019-06-061-3/+3
| | | | | | | Update ls-rcw to LSDK 19.03. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ls-mc to LSDK 19.03Biwen Li2019-06-061-5/+5
| | | | | | | Update to ls-mc to LSDK 19.03. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ls-dpl to LSDK 19.03Biwen Li2019-06-061-3/+3
| | | | | | | Update ls-dpl to LSDK 19.03. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update fman-ucode to LSDK 19.03Biwen Li2019-06-061-2/+2
| | | | | | | The source code was same from lsdk-1806 to lsdk-1903. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* ipq40xx: Add support for Linksys EA8300 (Dallas)Jeff Kletsky2019-05-183-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Linksys EA8300 is based on QCA4019 and QCA9888 and provides three, independent radios. NAND provides two, alternate kernel/firmware images with fail-over provided by the OEM U-Boot. Installation: "Factory" images may be installed directly through the OEM GUI. Hardware Highlights: * IPQ4019 at 717 MHz (4 CPUs) * 256 MB NAND (Winbond W29N02GV, 8-bit parallel) * 256 MB RAM * Three, fully-functional radios; `iw phy` reports (FCC/US, -CT): * 2.4 GHz radio at 30 dBm * 5 GHz radio on ch. 36-64 at 23 dBm * 5 GHz radio on ch. 100-144 at 23 dBm (DFS), 149-165 at 30 dBm #{ managed } <= 16, #{ AP, mesh point } <= 16, #{ IBSS } <= 1 * All two-stream, MCS 0-9 * 4x GigE LAN, 1x GigE Internet Ethernet jacks with port lights * USB3, single port on rear with LED * WPS and reset buttons * Four status lights on top * Serial pads internal (unpopulated) "Linksys Dallas WiFi AP router based on Qualcomm AP DK07.1-c1" Implementation Notes: The OEM flash layout is preserved at this time with 3 MB kernel and ~69 MB UBIFS for each firmware version. The sysdiag (1 MB) and syscfg (56 MB) partitions are untouched, available as read-only. Serial Connectivity: Serial connectivity is *not* required to flash. Serial may be accessed by opening the device and connecting a 3.3-V adapter using 115200, 8n1. U-Boot access is good, including the ability to load images over TFTP and either run or flash them. Looking at the top of the board, from the front of the unit, J3 can be found on the right edge of the board, near the rear | J3 | |-| | |O| | (3.3V seen, open-circuit) |O| | TXD |O| | RXD |O| | |O| | GND |-| | | Unimplemented: * serial1 "ttyQHS0" (serial0 works as console) * Bluetooth; Qualcomm CSR8811 (potentially conected to serial1) Other Notes: https://wikidevi.com/wiki/Linksys_EA8300 states FCC docs also cover the Linksys EA8250. According to the RF Test Report BT BR+EDR, "All models are identical except for the EA8300 supports 256QAM and the EA8250 disable 256QAM." Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
* firmware/ipq-wifi: Extend for multi-chip boardsJeff Kletsky2019-05-183-19/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This package provides board-specific reference ("cal") data on an interim basis until included in the upstream distros While originally conceived for IPQ4019-based boards, similar needs are appearing with three-radio devices. For some of these devices, both a board-2.bin file needs to be supplied both for the IPQ4019 as well as for the other radio on the board. This patch allows new or multiple overrides to be specified by: * Adding board name to ALLWIFIBOARDS * Placing file(s) in this directory named as board-<devicename>.<qca4019|qca9888|qca9984> * Adding $(eval $(call generate-ipq-wifi-package,<device>,<display name>)) (along with suitable package selection for the board) At this time, QCA4019, QCA9888, and QCA9984 are supported. Extension to other chips should be straightforward. The existing files, board-*.bin, are "grandfathered" as QCA4019. The package name has been retained for compatability reasons. At this time it DEPENDS:=@TARGET_ipq40xx, limiting its visibility. Build-tested-on: asus_map-ac2200, alfa-network_ap120c-ac, avm_fritzbox-7530, avm_fritzrepeater-3000, engenius_eap1300, engenius_ens620ext, linksys_ea6350v3, qxwlan-e2600ac-c1/-c2 Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
* linux-firmware: update to 20190416Deng Qingfang2019-05-141-5/+4
| | | | | | | | | | | | | | | | | Update linux-firmware to 20190416, which includes updated firmwares e.g. for ath10k Also switch to official tarball source. The following firmware files we use are updated in this change: ath10k/QCA6174/hw3.0/board-2.bin ath10k/QCA9888/hw2.0/firmware-5.bin ath10k/QCA988X/hw2.0/firmware-5.bin ath10k/QCA9984/hw1.0/firmware-5.bin mrvl/sd8887_uapsta.bin mrvl/pcie8897_uapsta.bin iwlwifi-8000C-36.ucode iwlwifi-8265-36.ucode Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* ath10k-firmware: update Candela Tech firmware imagesRobert Marko2019-05-111-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Release notes since last time: Release notes for wave-1: 2019-04-02: Support some get/set API for eeprom rate power tables. Mostly backported from 10.2 2019-04-02: Support adaptive-CCA, backported from 10.2 2019-04-02: Support adding eeprom configAddr pairs via the set-special API. These configAddrs can be used to change the default register settings for up to 12 registers. 2019-05-03: Fix tx-power settings for 2x2, 3x3 rates. Original logic I put in back in 2016 set 2x2 and 3x3 lower than the needed to be when using most NICs (very high powered NICs would not have been affected I think, not sure any of those exist though.) This improves throughput for 2x2 and 3x3 devices, especially when the signal is weaker. Release notes for wave-2: 2019-04-08: When setting keys, if high bit of high value of key_rsc_counter is set to 0x1, then the lower 48 bits will be used as the PN value. By default, PN is set to 1 each time the key is set. 2019-04-08: Pack PN into un-used 'excretries' aka 'num_pkt_loss_excess_retry' high 16 bits. This lets us report peer PN, but *only* if driver has previously set a PN when setting key (or set-special cmd is used to enable PN reporting). This is done so that we know the driver is recent enough to deal with the PN stat reporting. 2019-04-16: Support specifying tx rate on a per-beacon packet. See ath10k_wmi_op_gen_beacon_dma and ath10k_convert_hw_rate_to_rate_info for API details. Driver needs additional work to actually enable this feature currently. 2019-04-30: Compile out tx-prefetch caching logic. It is full of tricky bugs that cause tx hangs. I fixed at least one, but more remain and I have wasted too much time on this already. 2019-05-08: Start rate-ctrl at mcs-3 instead of mcs-5. This significantly helps DHCP happen quickly, probably because the initial rate being too high would take a while to ramp down, especially since there are few packets sent by the time DHCP needs to start. This bug was triggered by me decreasing retries of 0x1e (upstream default) to 0x4. But, I think it is better to start with lower initial MCS instead of always having a very high retry count. Tested on 8devices Jalapeno dev board(IPQ4019) Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [neatify]
* ath10k-firmware: update Candela Tech firmware imagesChristian Lamparter2019-03-301-24/+24
| | | | | | | | | | | | | | | | | | | Release notes since last time: Release notes for wave-1 / 10.1: 2019-03-28: Fix sometimes using bad TID for management frames in htt-mgt mode. (Backported from wave2, looks like bug would be the same though.) Release notes for wave-2 / 10.4: 2019-03-28: Fix off-channel scanning while associated in proxy-station mode. 2019-03-29: Fix sometimes sending mgt frames on wrong tid when using htt-mgt. This bug has been around since I first enabled htt-mgt mode. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath10k-firmware: update Candela Tech firmware imagesChristian Lamparter2019-03-251-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Release notes since last time: Release notes for wave-1: - 2019-03-12: Add btcoex feature flag for 2.4Ghz only adapters, backported from upstream 10.2 firmware. - 2019-03-12: Support offloading decrypt of PMF blockack frames to the host. This lets us do blockack with PMF and rx-sw-crypt. Normal hwcrypt scenarios would not need this. Release notes for wave-2: - 2019-03-12: Fix crash when tearing down VI TID when pending frames exist. Could reproduce this while doing rmmod when VI traffic was flowing and PMF was enabled but broken. Bad luck could rarely cause it to happen in more normal config too. - 2019-03-12: Support offloading decrypt of PMF blockack frames to the host. This lets us do blockack with PMF and rx-sw-crypt. Normal hwcrypt scenarios would not need this. - 2019-03-12: Re-work problematic patch that attempted to fix transmit on non-QOS tids. It appears buggy in several ways, hopefully improved now. This was introduced last fall. See github bug 78. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: add support for EnGenius ENS620EXTSteve Glennon2019-03-212-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Qualcomm IPQ4018 RAM: 256M FLASH: 32M SPI NOR W25Q256 ETH: QCA8075 WiFi2: IPQ4018 2T2R 2SS b/g/n WiFi5: IPQ4018 2T2R 2SS n/ac LED: - Power amber - LAN1(PoE) green - LAN2 green - Wi-Fi 2.4GHz green - Wi-Fi 5GHz green BTN: - WPS UART: 115200n8 3.3V J1 VCC(1) - GND(2) - TX(3) - RX(4) Added basic support to get the device up and running for a sysupgrade image only. There is currently no way back to factory firmware, so this is a one-way street to OpenWRT. Install from factory condition is convoluted, and may brick your device: 1) Enable SSH and disable the CLI on the factory device from the web user interface (Management->Advanced) 2) Reboot the device 3) Override the default, limited SSH shell: a) Get into the ssh shell: ssh admin@192.168.1.1 /bin/sh --login b) Change the dropbear script to disable the limited shell. At the empty command prompt type: sed -i '/login_ssh/s/^/#/g’ dropbear /etc/init.d/dropbear restart exit 4) ssh in to a (now-) normal OpenWRT SSH session 5) Flash your built image a) scp openwrt-ipq40xx-engenius_ens620ext-squashfs-sysupgrade.bin admin@192.168.1.1:/tmp/ b) ssh admin@192.168.1.1 c) sysupgrade -n /tmp/openwrt-ipq40xx-engenius_ens620ext-squashfs-sysupgrade.bin 6) After flash completes (it may say "Upgrade failed" followed by "Upgrade completed") and device reboots, log in to newly flashed system. Note you will now need to ssh as root rather than admin. Signed-off-by: Steve Glennon <s.glennon@cablelabs.com> [whitespace fixes, reordered partitions, removed rng node from 4.14, fixed 901-arm-boot-add-dts-files.patch] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: add support for AVM FRITZ!Repeater 3000David Bauer2019-03-132-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Qualcomm IPQ4019 RAM: 256M (NANYA NT5CC128M16JR-EK) FLASH: 128M NAND (Macronix MX30LF1G18AC-XKI) ETH: Qualcomm QCA8072 WiFi2: IPQ4019 2T2R 2SS b/g/n WiFi5: IPQ4019 2T2R 2SS n/ac WiFi5: QCA9984 4T4R 4SS n/ac LED: - Connect green/blue/red - Power green BTN: WPS/Connect UART: 115200n8 3.3V VCC - RX - TX - GND (Square is VCC) Installation ------------ 1. Grab the uboot for the Device from the 'u-boot-fritz3000' subdirectory. Place it in the same directory as the 'eva_ramboot.py' script. It is located in the 'scripts/flashing' subdirectory of the OpenWRT tree. 2. Assign yourself the IP address 192.168.178.10/24. Connect your Computer to one of the boxes LAN ports. 3. Connect Power to the Box. As soon as the LAN port of your computer shows link, load the U-Boot to the box using following command. > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz3000.bin 4. The U-Boot will now start. Now assign yourself the IP address 192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP server root directory and rename it to 'FRITZ3000.bin'. 5. The Box will now boot OpenWRT from RAM. This can take up to two minutes. 6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using scp. SSH into the Box and first write the Bootloader to both previous kernel partitions. > mtd write /path/to/uboot-fritz3000.bin uboot0 > mtd write /path/to/uboot-fritz3000.bin uboot1 7. Remove the AVM filesystem partitions to make room for our kernel + rootfs + overlayfs. > ubirmvol /dev/ubi0 --name=avm_filesys_0 > ubirmvol /dev/ubi0 --name=avm_filesys_1 8. Flash OpenWRT peristently using sysupgrade. > sysupgrade -n /path/to/openwrt-sysupgrade.bin Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq-wifi: update ALFA Network AP120C-AC board-2.binPiotr Dymacz2019-03-081-0/+0
| | | | | | | Add specific 'variant' for 'bus=ahb,bmi-chip-id=0,bmi-board-id=25' BDF. Use the same value ('ALFA-Network-AP120C-AC') as sent upstream. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ath10k-firmware: update Candela Tech firmware imagesMichael Yartys2019-03-061-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Release notes since last update: wave-1 firmware: * Feb 14, 2019: Remove logic that causes assert when swba logic is not initialized. This was seen when trying to bring up 6 VAP vdevs. A similar fix went into wave-2 firmware some time ago. * Feb 27, 2019: Support up to 32 vAP vdevs, fix stack corruption when driver requests too many vAP. * Feb 28, 2019: Support beacon-tx-wmi callback message. This lets driver properly clean up beacon buffers so we don't crash (somethings the entire OS/system) due to DMA errors. wave-2 firmware: * Feb 27. 2019: Support up to 32 AP vdevs. Previous to this, stack would be corrupted if you went past 16 AP vdevs. * Feb 28, 2019: Support beacon-tx-wmi callback message. This lets driver properly clean up beacon buffers. In wave-1, this could crash the entire OS, but I didn't see the same crashes in wave-2, so maybe it is fixed in some other way. Add the feature regardless as it seems proper. Signed-off-by: Michael Yartys <michael.yartys@gmail.com>
* ipq40xx: add support for FritzBox 7530David Bauer2019-02-282-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- CPU: Qualcomm IPQ4019 RAM: 256M FLASH: 128M NAND ETH: QCA8075 VDSL: Intel/Lantiq VRX518 PCIe attached currently not supported DECT: Dialog SC14448 currently not supported WiFi2: IPQ4019 2T2R 2SS b/g/n WiFi5: IPQ4019 2T2R 2SS n/ac LED: - Power/DSL green - WLAN green - FON/DECT green - Connect/WPS green - Info green - Info red BTN: - WLAN - FON - WPS/Connect UART: 115200n8 3.3V (located under the Dialog chip) VCC - RX - TX - GND (Square is VCC) Installation ------------ 1. Grab the uboot for the Device from the 'u-boot-fritz7530' subdirectory. Place it in the same directory as the 'eva_ramboot.py' script. It is located in the 'scripts/flashing' subdirectory of the OpenWRT tree. 2. Assign yourself the IP address 192.168.178.10/24. Connect your Computer to one of the boxes LAN ports. 3. Connect Power to the Box. As soon as the LAN port of your computer shows link, load the U-Boot to the box using following command. > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz7530.bin 4. The U-Boot will now start. Now assign yourself the IP address 192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP server root directory and rename it to 'FRITZ7530.bin'. 5. The Box will now boot OpenWRT from RAM. This can take up to two minutes. 6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using scp. SSH into the Box and first write the Bootloader to both previous kernel partitions. > mtd write /path/to/uboot-fritz7530.bin uboot0 > mtd write /path/to/uboot-fritz7530.bin uboot1 7. Remove the AVM filesystem partitions to make room for our kernel + rootfs + overlayfs. > ubirmvol /dev/ubi0 --name=avm_filesys_0 > ubirmvol /dev/ubi0 --name=avm_filesys_1 8. Flash OpenWRT peristently using sysupgrade. > sysupgrade -n /path/to/openwrt-sysupgrade.bin Signed-off-by: David Bauer <mail@david-bauer.net> [removed pcie-dts range node, refreshed on top of AP120-AC/E2600AC] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-06 20:33:58 +0000