aboutsummaryrefslogtreecommitdiffstats
path: root/package/firmware
Commit message (Collapse)AuthorAgeFilesLines
* ipq40xx: add support for 8devices Habanero DVKRobert Marko2020-03-092-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the 8devices Habanero development board. Specs are: CPU: QCA IPQ4019 RAM: DDR3L 512MB Storage: 32MB SPI-NOR and optional Parallel SLC NAND(Some boards ship with it and some without) WLAN1: 2.4 GHz built into IPQ4019 (802.11n) 2x2 WLAN2: 5 GHz built into IPO4019 (802.11ac Wawe-2) 2x2 Ethernet: 5x Gbit LAN (QCA 8075) USB: 1x USB 2.0 and 1x USB 3.0 (Both built into IPQ4019) MicroSD slot (Uses SD controller built into IPQ4019) SDIO3.0/EMMC slot (Uses the same SD controller) Mini PCI-E Gen 2.0 slot (Built into IPQ4019) 5x LEDs (4 GPIO controllable) 2x Pushbutton (1 is connected to GPIO, other to SoC reset) LCD ZIF socket (Uses the LCD controller built into IPQ4019 which has no driver support) 1x UART 115200 rate on J18 2x breakout development headers 12V DC Jack for power DIP switch for bootstrap configuration Installation instructions: Since boards ship with vendors fork of OpenWrt sysupgrade can be used. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq40xx: add support for EnGenius EAP2200Steven Lin2020-02-283-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SOC: IPQ4019 / QCA Dakota CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7 DRAM: 256 MiB FLASH: NOR 4 MiB + NAND 128 MiB ETH: Qualcomm Atheros QCA8072 WLAN1: Qualcomm Atheros QCA4019 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4019 5GHz 802.11a/n/ac 2:2x2 WLAN2: Qualcomm Atheros QCA9888 5GHz 802.11a/n/ac 2:2x2 INPUT: WPS Button LEDS: Power, LAN1, LAN2, WLAN 2.4GHz, WLAN 5GHz-1, WLAN 5GHz-2, OPMODE 1. Load Ramdisk via U-Boot To set up the flash memory environment, do the following: a. As a preliminary step, ensure that the board console port is connected to the PC using these RS232 parameters: * 115200bps * 8N1 b. Confirm that the PC is connected to the board using one of the Ethernet ports. c. Set a static ip 192.168.99.8 for Ethernet that connects to board. d. The PC must have a TFTP server launched and listening on the interface to which the board is connected. e. At this stage power up the board and, after a few seconds, press 4 and then any key during the countdown. U-BOOT> set serverip 192.168.99.9 && tftpboot 0x84000000 192.168.99.8:openwrt.itb && bootm Signed-off-by: Steven Lin <steven.lin@senao.com> [copied 4.19 dts to 5.4] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* linux-firmware: update to 20200122DENG Qingfang2020-02-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update linux-firmware to 20200122 git log --pretty=oneline --abbrev-commit 20191215..20200122 1eb2408 linux-firmware: Update firmware file for Intel Bluetooth AX200 0dc1611 linux-firmware: Update firmware file for Intel Bluetooth AX201 d03f79c linux-firmware: Update firmware file for Intel Bluetooth 9560 aab62bc linux-firmware: Update firmware file for Intel Bluetooth 9260 ed0aa3a nvidia: add TU102/TU104/TU106 signed firmware 9c340bd amdgpu: update navi10 firmware for 19.50 3b4a503 amdgpu: Add navi10 TA ucode 16cc13a Merge branch 'v1.1.3' of https://github.com/ruiwang-mtk/linux_fw_vpu_v1.1.37f3177d mediatek: update MT8173 VPU firmware to v1.1.3 67d4ff5 Mellanox: Add new mlxsw_spectrum firmware xx.2000.2714 f1c9e7b radeon: update oland rlc microcode from amdgpu b1dafb7 amdgpu: update vega20 microcode for 19.50 c38789e amdgpu: update vega12 microcode for 19.50 5a141c1 amdgpu: update vega10 microcode for 19.50 a03173a amdgpu: update picasso microcode for 19.50 86e9a5f amdgpu: update raven2 microcode for 19.50 febe09a amdgpu: update raven microcode for 19.50 af76fd0 amdgpu: update navi10 microcode for 19.50 b5b176a amdgpu: update navi14 microcode for 19.50 ad90178 amdgpu: add TA microcode for Raven asics 379551b qed: Add firmware 8.42.2.0 58b4003 Merge branch 'RB3-wlan-firmware-1387-v2' of https://github.com/andersson/linux-firmware 5967a45 Adjust WHENCE entry to check_whence doesn't complain d1e743d Merge branch 'master' of https://github.com/NXP/mwifiex-firmware d6219ab qcom: Switch SDM845 WLAN firmware e65245c linux-firmware: add NXP firmware licence file 6871bff Merge branch 'ath10k-20191220' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware b142c2e ath10k: WCN3990 hw1.0: add firmware WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1 8809b87 ath10k: QCA9984 hw1.0: update firmware-5.bin to 10.4-3.9.0.2-00070 513d70c ath10k: QCA988X hw2.0: update firmware-5.bin to 10.2.4-1.0-00047 203435b ath10k: QCA9888 hw2.0: update firmware-5.bin to 10.4-3.9.0.2-00070 a66d2fc ath10k: QCA9887 hw1.0: update firmware-5.bin to 10.2.4-1.0-00047 6d19154 ath10k: QCA6174 hw3.0: update board-2.bin c4586ff linux-firmware: Update AMD cpu microcode Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* brcm2708: rename target to bcm27xxAdrian Schmutzler2020-02-141-4/+4
| | | | | | | | | | | | | | | | | This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Despite, since subtargets range from bcm2708 to bcm2711, it seems appropriate to use bcm27xx instead of bcm2708 (again, as already done for BOARDNAME). This also renames the packages brcm2708-userland and brcm2708-gpu-fw. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k-firmware: update ath10k-ct firmwareMichael Yartys2020-02-131-24/+24
| | | | | | | | | | | | | | This supports better per-chain noise floor reporting, which in turn allows for better RSSI reporting in the driver. Wave-2 fixes a long-standing rate-ctrl problem when connected to xbox (and probably other devices). Wave-2 has fix for crash likely related to rekeying. Wave-1 has some debugging code added where a user reported a crash. Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ipq806x+qca9984,ipq4019+qca9986] Signed-off-by: Michael Yartys <michael.yartys@protonmail.com>
* cypress-firmware: update to v4.14.77-2020_0115Álvaro Fernández Rojas2020-02-011-4/+58
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ipq-wifi: drop deprecated .bin supportChristian Lamparter2020-01-263-4/+1
| | | | | | | | | | This patch converts the Qxwlan E2600AC image away from the deprecated .bin file and to the new .qca4019 method. As a result, we no longer need to carry around the legacy support for handling .bin files. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: add support for EnGenius EMD1Yen-Ting-Shen2020-01-262-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SOC: IPQ4018 / QCA Dakota CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7 DRAM: 256 MiB NOR: 32 MiB ETH: Qualcomm Atheros QCA8072 (1 port) WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2 INPUT: RESET Button LEDS: White, Blue, Red, Orange Flash instruction: From EnGenius firmware to OpenWrt firmware: In Firmware Upgrade page, upgrade your openwrt-ipq40xx-generic-engenius_emd1-squashfs-factory.bin directly. From OpenWrt firmware to EnGenius firmware: 1. Setup a TFTP server on your computer and configure static IP to 192.168.99.8 Put the EnGenius firmware in the TFTP server directory on your computer. 2. Power up EMD1. Press 4 and then press any key to enter u-boot. 3. Download EnGenius firmware (IPQ40xx) # tftpboot 0x84000000 openwrt-ipq40xx-emd1-nor-fw-s.img 4. Flash the firmware (IPQ40xx) # imgaddr=0x84000000 && source 0x84000000:script 5. Reboot (IPQ40xx) # reset Signed-off-by: Yen-Ting-Shen <frank.shen@senao.com> [removed BOARD_NAME] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: Add support for D-Link DAP-2610Fredrik Olofsson2020-01-262-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications ============== - SOC: IPQ4018 - RAM: DDR3 256MB - Flash: SPI NOR 16MB - WiFi: - 2.4GHz: IPQ4018, 2x2, front end SKY85303-11 - 5GHz: IPQ4018, 2x2, front end SKY85717-21 - Ethernet: 1x 10/100/1000Mbps, POE 802.3af - PHY: QCA8072 - UART: GND, blocked, 3.3V, RX, TX / 115200 8N1 - LED: 1x red / green - Button: 1x reset / factory default - U-Boot bootloader with tftp and "emergency web server" accessible using serial port. Installation ============ Flash factory image from D-Link web UI. Constraints in the D-Link web UI makes the factory image unnecessarily large. Flash again using sysupgrade from inside OpenWrt to reclaim some flash space. Return to stock D-Link firmware =============================== Partition layout is preserved, and it is possible to return to the stock firmware simply by downloading it from D-Link and writing it to the firmware partition. # mtd -r write dap2610-firmware.bin firmware Quirks ====== To be flashable from the D-Link http server, the firmware must be larger then 6MB, and the size in the firmware header must match the actual file size. Also, the boot loader verifies the checksum of the firmware before each boot, thus the jffs2 must be after the checksum covered part. This is solved in the factory image by having the rootfs at the very end of the image (without pad-rootfs). The sysupgrade image which does not have to be flashable from the D-Link web UI may be smaller, and the checksum in the firmware header only covers the kernel part of the image. Signed-off-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com> [added WRGG Variables to DEVICE_VARS, squashed spi pinconf/mux, added emd1's gmac0 config,fix dtc warnings] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath10k-firmware: fix mirror hashDENG Qingfang2020-01-241-1/+1
| | | | | | | | | Fix PKG_MIRROR_HASH hash mismatch. Fixes: 641a93f0f226 ("ath10k-firmware: update wave 1 firmware to 10.2.4-1.0-00047") Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> [added missing commit description] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ipq40xx: add support for EZVIZ CS-W3-WD1200G EUPTom Brouwer2020-01-122-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware: SOC: Qualcomm IPQ4018 RAM: 128 MB Nanya NT5CC64M16GP-DI FLASH: 16 MB Macronix MX25L12805D ETH: Qualcomm QCA8075 (4 Gigabit ports, 3xLAN, 1xWAN) WLAN: Qualcomm IPQ4018 (2.4 & 5 Ghz) BUTTON: Shared WPS/Reset button LED: RGB Status/Power LED SERIAL: Header J8 (UART, Left side of board). Numbered from top to bottom: (1) GND, (2) TX, (3) RX, (4) VCC (White triangle next to it). 3.3v, 115200, 8N1 Tested/Working: * Ethernet * WiFi (2.4 and 5GHz) * Status LED * Reset Button (See note below) Implementation notes: * The shared WPS/Reset button is implemented as a Reset button * I could not find a original firmware image to reverse engineer, meaning currently it's not possible to flash OpenWrt through the Web GUI. Installation (Through Serial console & TFTP): 1. Set your PC to fixed IP 192.168.1.12, Netmask 255.255.255.0, and connect to one of the LAN ports 2. Rename the initramfs image to 'C0A8010B.img' and enable a TFTP server on your pc, to serve the image 2. Connect to the router through serial (See connection properties above) 3. Hit a key during startup, to pause startup 4. type `setenv serverip 192.168.1.12`, to set the tftp server address 5. type `tftpboot`, to load the image from the laptop through tftp 6. type `bootm` to run the loaded image from memory 6. (If you want to return to stock firmware later, create an full MTD backup, e.g. using instructions here https://openwrt.org/docs/guide-user/installation/generic.backup#create_full_mtd_backup) 7. Transfer the 'sysupgrade' OpenWrt firmware image from PC to router, e.g.: `scp xxx-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/upgrade.bin` 8. Run sysupgrade to permanently install OpenWrt to flash: `sysupgrade -n /tmp/upgrade.bin` Revert to stock: To revert to stock, you need the MTD backup from step 6 above: 1. Unpack the MTD backup archive 2. Transfer the 'firmware' partition image to the router (e.g. mtd8_firmware.backup) 3. On the router, do `mtd write mtd8_firmware.backup firmware` Signed-off-by: Tom Brouwer <tombrouwer@outlook.com> [removed BOARD_NAME, OpenWRT->OpenWrt, changed LED device name to board name] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ixp4xx: remove unmaintained targetAdrian Schmutzler2020-01-083-234/+0
| | | | | | | | | | | This target is still on kernel 4.9, and it looks like there is no active maintainer for this target anymore. Remove the code and all the packages which are only used by this target. To add this target to OpenWrt again port it to a recent and supported kernel version. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath10k-firmware: Add kmod-ath10k-ct-smallbuffers to dependsHauke Mehrtens2019-12-241-6/+6
| | | | | | | Only select ath10k-ct-regular when smallbuffers version was not selected. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-firmware: update Candela Tech firmware imagesStefan Lippers-Hollmann2019-12-231-20/+20
| | | | | | | | | | | | | | | | | The release notes since last time for wave-1: * No changes to wave-1, but I make a version .014 copy anyway to keep the makefile in sync. The release notes since last time for wave-2: * December 16, 2019: Wave-2 has a fix to make setting txpower work better. Before setting the power was ignored at least some of the time (it also appeared to work mostly, so I guess it was being correctly set in other ways). Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* linux-firmware: update to 20191215DENG Qingfang2019-12-233-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update linux-firmware to 20191215 git log --pretty=oneline --abbrev-commit 20190815..20191215 eefb5f7 inside-secure: add new "mini" firmware for the EIP197 driver dd1a12e Merge branch 'RB3-adsp-cdsp-mss-v4' of https://github.com/andersson/linux-firmware c523dcd WHENCE: Add raspberry-pi4 SDIO file 99a15a4 Merge branch 'rpi4-fw' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware 2260cbd Merge branch 'master' of https://github.com/dikshitaagarwal/video_firmware_5.4 4c688be Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware e10ed21 qcom: update venus firmware files for v5.4 af4c4be cxgb4: Update firmware to revision 1.24.11.0 f93c7a1 brcm: Add BCM43455 NVRAM for Raspberry Pi 4 B 212e441 qcom: Add SDM845 Compute DSP firmware ec84cf9 qcom: Add SDM845 Audio DSP firmware 62d0a1a qcom: Add SDM845 modem firmware e8a0f4c rtl_nic: add firmware rtl8168fp-3 9581f15 Merge branch 'nxp_mc' of https://github.com/NXP/linux-firmware 978c04e linux-firmware: Update NXP Management Complex firmware to version 10.18.0 c62c3c2 linux-firmware: Update firmware file for Intel Bluetooth AX201 6272383 linux-firmware: Update firmware file for Intel Bluetooth AX200 84a7ca5 linux-firmware: Update firmware file for Intel Bluetooth 9560 96c3994 linux-firmware: Update firmware file for Intel Bluetooth 9260 7319341 amdgpu: update navi14 vcn firmware b363d9d amdgpu: update navi10 vcn firmware f1100dd Merge branch 'ehl_tgl_guc_huc' of git://anongit.freedesktop.org/drm/drm-firmware 4debf21 i915: Add HuC firmware v7.0.3 for TGL 1eb2ac4 i915: Add GuC firmware v35.2.0 for TGL 4b0a210 i915: Add HuC firmware v9.0.0 for EHL 610fe75 i915: Add GuC firmware v33.0.4 for EHL 11bdc57 rtw88: RTL8723D: add firmware file v48 9e194c7 qed: Add firmware 8.40.33.0 4065643 amdgpu: add new navi14 wks gfx firmware for 19.30 d4f88ea amdgpu: update navi14 firmware for 19.30 ea755b6 amdgpu: update raven firmware for 19.30 340e06e linux-firmware: Add firmware file for Intel Bluetooth AX201 ad7a8b2 Mellanox: Add new mlxsw_spectrum2 firmware 29.2000.2308 e756bf3 Mellanox: Add new mlxsw_spectrum firmware 13.2000.2308 b27d123 rtl_nic: add firmware files for RTL8153 180e2b4 rtl_bt: Update configuration file for BT part of RTL8822CU 0acd93e bnx2x: Add FW 7.13.15.0. 2b016af linux-firmware: Update AMD cpu microcode 4c3e853 linux-firmware: Update firmware file for Intel Bluetooth AX200 7a79d22 linux-firmware: Update firmware file for Intel Bluetooth AX201 fdab23a linux-firmware: Update firmware file for Intel Bluetooth 9560 b68efd7 linux-firmware: Update firmware file for Intel Bluetooth 9260 aa95e90 amdgpu: add initial navi14 firmware form 19.30 c1ce20e rtlwifi: rtl8821ae: Add firmware for the RTL8812AE variant. 7d187ac ice: Fix up WHENCE entry and symlink 4c55b97 Merge branch 'dev-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/firmware 7c4db73 nvidia: Update Tegra210 XUSB firmware to v50.24 c054c53 nvidia: Add XUSB firmware for Tegra194 9cfefbd Remove duplicate symlinks 2de7abd copy-firmware: Create symlinks from WHENCE file 2116bcd Make symlinks consistent c0590d8 amdgpu: update vega20 ucode for 19.30 43cc648 amdgpu: update vega12 ucode for 19.30 ffa0ed7 amdgpu: update vega10 ucode for 19.30 83e1b41 amdgpu: update picasso ucode for 19.30 7008617 amdgpu: update raven2 ucode for 19.30 9200baa amdgpu: update raven ucode for 19.30 f25a39c amdgpu: add new raven rlc firmware 9ae61e7 ice: Add package file for Intel E800 series driver 417a9c6 amdgpu: add initial navi10 firmware 702cc63 Merge branch 'cml_tgl-icl-dmc_huc_updates' of git://anongit.freedesktop.org/drm/drm-firmware 3182b4b Merge branch 'gpu-845' of https://github.com/ndechesne/linux-firmware 3ea84e5 drm/i915/firmware: Add v9.0.0 of HuC for Icelake 60ddd0e drm/i915/firmware: Add v4.0.0 of HuC for Cometlake c47d8f8 drm/i915/firmware: Add v4.0.0 of HuC for Geminilake 2cdb78c drm/i915/firmware: Add v2.0.0 of HuC for Broxton 38965af drm/i915/firmware: Add v4.0.0 of HuC for Kabylake 8d127af drm/i915/firmware: Add v2.0.0 of HuC for Skylake e7b6fa7 drm/i915/firmware: Add v33 of GuC for CML e4ea25f drm/i915/firmware: Add v2.04 of DMC for TGL 51deca6 drm/i915/firmware: Add v1.09 of DMC for ICL 88ea23e qcom: add firmware files for Adreno a630 6c6918a linux-firmware: Update firmware file for Intel Bluetooth AX201 6ddb9d9 Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware d45c950 nvidia: Add XUSB firmware for Tegra186 65c6595 Add symlinks for Tegra VIC firmware binaries 0b22bfc rtl_bt: Update RTL8723D BT FW to 0x828A_96F1 f667c00 rtl_nic: add firmware rtl8125a-3 fe1ae0d linux-firmware: Add firmware file for Intel Bluetooth AX201 2f885ba Chelsio driver loads firmware configuration file to allow firmware to distribute resources before chip bring up. Chelsio NIC driver, cxgb4 searches for firmware config file at /lib/firmware/cxgb4/ directory. 7307a29 brcm: Add 43455 based AP6255 NVRAM for the Minix Neo Z83-4 Mini PC 65d02cd brcm: Add 43340 based AP6234 NVRAM for the PoV TAB-P1006W-232 tablet f38fb4f Merge tag 'iwlwifi-fw-2019-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware 40e4162 iwlwifi: update FWs to core45-152 release c0fb3d9 check_whence: Add copy-firmware.sh to the list of ignored files aa703aa rtl_bt: Update RTL8822C BT FW to V0x098A_94A4 665001a linux-firmware: Update firmware file for Intel Bluetooth AX200 c0ca980 linux-firmware: Update firmware file for Intel Bluetooth AX201 b6427bf linux-firmware: Update firmware file for Intel Bluetooth 9560 fe48882 linux-firmware: Update firmware file for Intel Bluetooth 9260 ebd40c6 Mellanox: Add new mlxsw_spectrum firmware 13.2000.1886 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> [Added missing symbolic links to Makefile] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq-wifi: add BDF for Aruba AP-303David Bauer2019-12-202-0/+2
| | | | | | The BDF originates from the vendor-firmware. Signed-off-by: David Bauer <mail@david-bauer.net>
* cypress-nvram: add new packageÁlvaro Fernández Rojas2019-12-181-0/+95
| | | | | | | This package contains nvram files for brcmfmac, a mac80211 driver for FullMAC Cypress devices. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcmfmac-board-rpi: remove uneeded packageÁlvaro Fernández Rojas2019-12-171-53/+0
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* cypress-firmware: add new packageÁlvaro Fernández Rojas2019-12-171-0/+239
| | | | | | | This package contains firmwares provided by Cypress See https://community.cypress.com/community/linux Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k-firmware: update Candela Tech firmware imagesKoen Vandeputte2019-12-101-24/+24
| | | | | | | | | | | | | | The release notes since last time for wave-1: * November 29, 2019: Fix IBSS merge issue, related to TSF id leakage bug in firmware code. Thanks for Ahmed Zaki @ Mage-Networks for helping to diagnose and test. The release notes since last time for wave-2: * December 6, 2019: Fix 160Mhz problem caused by logic that did not take into account the fact that 160Mhz has only 1/2 of the NSS of lower bandwidths in the rate table. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* wireless-regdb: Make it build with python2Hauke Mehrtens2019-11-211-0/+58
| | | | | | | | This backports a patch to build it work with python2 in addition to python3. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Petr Štetiar <ynezz@true.cz>
* am33x-cm3: removeAndre Heider2019-11-201-42/+0
| | | | | | | | | | | | | | | This is currently unused and not working anyway, since the used upstream kernel loads am335x-pm-firmware.elf and not am335x-pm-firmware.bin [0]. The last downstream patches using the latter were removed with e4eef7e6. Remove it instead of fixing it since the rtc-only sleep state can even damage the hardware [1]. [0] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ccbbb9faac946ce61c241ce9f08b3486fabf031d [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7a6cb0abe1aa63334f3ded6d2b6c8eca80e72302 Signed-off-by: Andre Heider <a.heider@gmail.com>
* firmware: intel-microcode: bump to 20190918Zoltan HERPAI2019-11-101-2/+2
| | | | | | | | | | | | | | | | | | | | * New upstream microcode datafile 20190918 *Might* contain mitigations for INTEL-SA-00247 (RAMBleed), given the set of processors being updated. * Updated Microcodes: sig 0x000306d4, pf_mask 0xc0, 2019-06-13, rev 0x002e, size 19456 sig 0x000306f4, pf_mask 0x80, 2019-06-17, rev 0x0016, size 18432 sig 0x00040671, pf_mask 0x22, 2019-06-13, rev 0x0021, size 14336 sig 0x000406f1, pf_mask 0xef, 2019-06-18, rev 0xb000038, size 30720 sig 0x00050654, pf_mask 0xb7, 2019-07-31, rev 0x2000064, size 33792 sig 0x00050657, pf_mask 0xbf, 2019-08-12, rev 0x500002b, size 51200 sig 0x00050662, pf_mask 0x10, 2019-06-17, rev 0x001c, size 32768 sig 0x00050663, pf_mask 0x10, 2019-06-17, rev 0x7000019, size 24576 sig 0x00050664, pf_mask 0x10, 2019-06-17, rev 0xf000017, size 24576 sig 0x00050665, pf_mask 0x10, 2019-06-17, rev 0xe00000f, size 19456 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* firmware: intel-microcode: bump to 20190618Zoltan HERPAI2019-11-101-2/+2
| | | | | | | | | | * Implements MDS mitigation (RIDL, Fallout, Zombieload), INTEL-SA-00223 CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091 * Updated Microcodes: sig 0x000206d6, pf_mask 0x6d, 2019-05-21, rev 0x061f, size 18432 sig 0x000206d7, pf_mask 0x6d, 2019-05-21, rev 0x0718, size 19456 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* firmware: intel-microcode: bump to 20190514Zoltan HERPAI2019-11-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * New Microcodes: sig 0x00030678, pf_mask 0x02, 2019-04-22, rev 0x0838, size 52224 sig 0x00030678, pf_mask 0x0c, 2019-04-22, rev 0x0838, size 52224 sig 0x00030679, pf_mask 0x0f, 2019-04-23, rev 0x090c, size 52224 sig 0x000406c3, pf_mask 0x01, 2019-04-23, rev 0x0368, size 69632 sig 0x000406c4, pf_mask 0x01, 2019-04-23, rev 0x0411, size 68608 sig 0x00050657, pf_mask 0xbf, 2019-02-27, rev 0x5000021, size 47104 sig 0x000806e9, pf_mask 0x10, 2018-10-18, rev 0x009e, size 98304 sig 0x000806eb, pf_mask 0xd0, 2018-10-25, rev 0x00a4, size 99328 sig 0x000806ec, pf_mask 0x94, 2019-02-12, rev 0x00b2, size 98304 sig 0x000906ec, pf_mask 0x22, 2018-09-29, rev 0x00a2, size 98304 sig 0x000906ed, pf_mask 0x22, 2019-02-04, rev 0x00b0, size 97280 * Updated Microcodes: sig 0x000206a7, pf_mask 0x12, 2019-02-17, rev 0x002f, size 12288 sig 0x000306a9, pf_mask 0x12, 2019-02-13, rev 0x0021, size 14336 sig 0x000306c3, pf_mask 0x32, 2019-02-26, rev 0x0027, size 23552 sig 0x000306d4, pf_mask 0xc0, 2019-03-07, rev 0x002d, size 19456 sig 0x000306e4, pf_mask 0xed, 2019-03-14, rev 0x042e, size 16384 sig 0x000306e7, pf_mask 0xed, 2019-03-14, rev 0x0715, size 17408 sig 0x000306f2, pf_mask 0x6f, 2019-03-01, rev 0x0043, size 34816 sig 0x000306f4, pf_mask 0x80, 2019-03-01, rev 0x0014, size 18432 sig 0x00040651, pf_mask 0x72, 2019-02-26, rev 0x0025, size 21504 sig 0x00040661, pf_mask 0x32, 2019-02-26, rev 0x001b, size 25600 sig 0x00040671, pf_mask 0x22, 2019-03-07, rev 0x0020, size 14336 sig 0x000406e3, pf_mask 0xc0, 2019-04-01, rev 0x00cc, size 100352 sig 0x000406f1, pf_mask 0xef, 2019-03-02, rev 0xb000036, size 30720 sig 0x00050654, pf_mask 0xb7, 2019-04-02, rev 0x200005e, size 32768 sig 0x00050662, pf_mask 0x10, 2019-03-23, rev 0x001a, size 32768 sig 0x00050663, pf_mask 0x10, 2019-03-23, rev 0x7000017, size 24576 sig 0x00050664, pf_mask 0x10, 2019-03-23, rev 0xf000015, size 23552 sig 0x00050665, pf_mask 0x10, 2019-03-23, rev 0xe00000d, size 19456 sig 0x000506c9, pf_mask 0x03, 2019-01-15, rev 0x0038, size 17408 sig 0x000506ca, pf_mask 0x03, 2019-03-01, rev 0x0016, size 15360 sig 0x000506e3, pf_mask 0x36, 2019-04-01, rev 0x00cc, size 100352 sig 0x000506f1, pf_mask 0x01, 2019-03-21, rev 0x002e, size 11264 sig 0x000706a1, pf_mask 0x01, 2019-01-02, rev 0x002e, size 73728 sig 0x000806e9, pf_mask 0x10, 2019-04-01, rev 0x00b4, size 98304 sig 0x000806e9, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328 sig 0x000806ea, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328 sig 0x000806eb, pf_mask 0xd0, 2019-03-30, rev 0x00b8, size 98304 sig 0x000806ec, pf_mask 0x94, 2019-03-30, rev 0x00b8, size 97280 sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906ea, pf_mask 0x22, 2019-04-01, rev 0x00b4, size 98304 sig 0x000906eb, pf_mask 0x02, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906ec, pf_mask 0x22, 2019-02-14, rev 0x00ae, size 98304 sig 0x000906ed, pf_mask 0x22, 2019-03-17, rev 0x00b8, size 97280 * Implements MDS mitigation (RIDL, Fallout, Zombieload), INTEL-SA-00223 CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ath10k-firmware: update Candela Tech firmware imagesKoen Vandeputte2019-11-051-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The release notes since last time for wave-1: * October 5, 2019: Fix too-short msg caused by invalid use of PayloadLen in receive path. This appears to resolve the issue of getting (and ignoring) too-short commands when we detect loss of CE interrupts and go into polling mode. * October 12, 2019: Fix regression in IBSS mode that caused SWBA overrun issues. Related to regression added during the ct-station logic, specifically TSF allocation. Thanks for Ahmed Zaki @ Mage-Networks for helping to diagnose and test. * October 15, 2019: Only send beacon tx completion events if we can detect CT driver is being used (based on CT_STATS_OK flag being set). This should help CT firmware work better on stock driver. The release notes since last time for wave-2: * October 15, 2019: Only send beacon tx completion events if we can detect CT driver is being used (based on ATH10k_USE_TXCOMPL_TXRATE2 | ATH10k_USE_TXCOMPL_TXRATE1 flags being set). This should help CT firmware work better on stock driver. * October 31, 2019: Compile out peer-ratecode-list-event. ath10k driver ignores the event. * November 1, 2019: Fix rate-ctrl related crash when nss and other things were changed while station stays associated. See bug: https://github.com/greearb/ath10k-ct/issues/96 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath10k-firmware: update wave 1 firmware to 10.2.4-1.0-00047David Bauer2019-10-271-5/+5
| | | | | | | This fixes frequent crashes observed on a UniFi AC Mesh using OpenWrt master and 19.07. 18.06 seems not affected from our testing. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath10k-firmware: retrieve wave 1 firmware from kvaloDavid Bauer2019-10-272-4/+4
| | | | | | | | | | | | | This commit changes the source of the Wave 1 ath10k-firmware from linux-firmware to Kall Valos ath10k-firmware repository. This is necessary as the firmware selected in linux-firmware produces frequent crashes in some circumstances. This patch can be removed as soon as linux-firmware carries 10.2.4-1.0-00047 firmware. Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq-wifi: add AVM FRITZ!Repeater 1200 bdfDavid Bauer2019-10-232-0/+2
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* firmware: add Realtek RTL8822BE/RTL8822CE firmwareDavid Bauer2019-10-221-0/+15
| | | | | | | This commit adds packages for the Realtek RTl8822BE/RTL8822CE firmware to be used with the rtw88 driver. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath10k-firmware: update Candela Tech firmware imagesRobert Marko2019-09-151-20/+20
| | | | | | | This enables a feature flag in the wave-2 firmware wmi-services indicating it can send software-encrypted raw frames. This should in turn allow the AP-VLAN feature to work. Signed-off-by: Robert Marko <robimarko@gmail.com>
* linux-firmware: add mediatek BT firmwareJohn Crispin2019-08-301-0/+9
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ath10k-firmware: update Candela Tech firmware imagesKoen Vandeputte2019-08-271-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | This should fix a problem with 1560 MTU, 160Mhz on DFS channels, some other small issues on < 5.2 kernels, and for 5.2 driver, it pulls in some upstream stable fixes. wave-1 firmware changes since last update: * June 24, 2019: Try allocating low-priority WMI msgs if high-prio are not available. * June 24, 2019: Init rate-ctrl to start at lowest rate instead of in the middle. Hoping this helps DHCP when station connects from a long distance. wave-2: * June 24, 2019 Start rate-ctrl at minimal values to help DHCP work better for far-away peers. * July 24, 2019 Fix old regression that made /a (and probably /b/g) perform poorly, at least on diet-compiled images. * Aug 8, 2019 Improve a/b/g rate-ctrl by damping the PER swings caused by the all-or-nothing logic of transmitting non-block-ack frames one at a time. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* linux-firmware: intel: Use recent version of wifi firmwareHauke Mehrtens2019-08-181-3/+3
| | | | | | | iwlwifi from the new backports also supports more recent FW versions, update to the most recent versions for already supported devices. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq-wifi: drop upstreamed custom board-2.binChristian Lamparter2019-08-189-15/+0
| | | | | | | | | | | | | | | | | | | | | | The BDFs for the: ALFA Network AP120C-AC ASUS Lyra AVM FRITZ!Box 7530 AVM FRITZ!Repeater 3000 EnGenius EAP1300 EnGenius ENS620EXT Netgear Orbi Pro SRK60 boards were upstreamed to the ath10k-firmware repository and linux-firmware.git. Furthermore the BDFs for the: OpenMesh A42 specific BDFs OpenMesh A62 specific BDFs Linksys EA6350v3 have been updated. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* linux-firmware: update to 20190815Christian Lamparter2019-08-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update linux-firmware to 20190815 git log --pretty=oneline --abbrev-commit 20190815..20190815 07b925b Install only listed firmware files 5621bfc rtw88: add a README file 7e431c5 rtw88: RTL8822C: add WoW firmware v7.3 2dc7023 rtw88: RTL8822C: update rtw8822c_fw.bin to v7.3 d3d000d Merge branch 'ath10k-20190808' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware d3e17e9 Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware d3f7234 Merge commit '70af908f4ad7aa8bc65032253f99a0a4fbe1e6c3' of https://github.com/Netronome/linux-firmware 1f0a99f ath10k: QCA9984 hw1.0: update board-2.bin 49c1187 ath10k: QCA9984 hw1.0: update firmware-5.bin to 10.4-3.9.0.2-00046 1031f01 ath10k: QCA988X hw2.0: update firmware-5.bin to 10.2.4-1.0-00045 cf714a2 ath10k: QCA9888 hw2.0: update board-2.bin 81e2e77 ath10k: QCA9888 hw2.0: update firmware-5.bin to 10.4-3.9.0.2-00040 8dc2dfb ath10k: QCA9887 hw1.0: update firmware-5.bin to 10.2.4-1.0-00045 1bd3ef2 ath10k: QCA6174 hw3.0: update firmware-6.bin to WLAN.RM.4.4.1-00140-QCARMSWPZ-1 e043109 ath10k: QCA4019 hw1.0: update board-2.bin b1e26aa cxgb4: update firmware to revision 1.24.3.0 70af908 nfp: update Agilio SmartNIC flower firmware to rev AOTC-2.10.A.38 dff98c6 Merge branch 'master' of git://github.com/skeggsb/linux-firmware 580b076 Merge branch 'nxp_mc' of https://github.com/NXP/linux-firmware f9b0071 Merge tag 'iwlwifi-fw-2019-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware 2a3b75d nvidia: add missing entries in WHENCE 6fc1eb1 linux-firmware: Update NXP Management Complex firmware to version 10.16.2 cd6cb7b iwlwifi: update -48 FWs for Qu and cc b5f09bb iwlwifi: update FWs for 3168, 7265D, 9000, 9260, 8000, 8265 and cc bf13a71 Merge branch 'guc_v33' of git://anongit.freedesktop.org/drm/drm-firmware d52556e linux-firmware: Update firmware file for Intel Bluetooth AX201 dbcc2fb linux-firmware: Update firmware file for Intel Bluetooth 22161 a5ee415 linux-firmware: Update firmware file for Intel Bluetooth 9560 7444ca4 linux-firmware: Update firmware file for Intel Bluetooth 9260 3d1e553 amdgpu: update vega10 VCE firmware 5d4e3cc amdgpu: update picasso vcn firmware 6a45d9e amdgpu: update raven vcn firmware 9c8161f amdgpu: update tonga to latest 19.20 firmware 7b6c49c amdgpu: update vega12 to latest 19.20 firmware 4f7b71b amdgpu: partially revert 2579167548be33afb1fe2a9a5c141561ee5a8bbe fd3cc24 amdgpu: update vega10 to latest 19.20 firmware c190efa amdgpu: update polaris12 to latest 19.20 firmware f42b54e amdgpu: update raven2 to latest 19.20 firmware fc89ce8 amdgpu: update raven to latest 19.20 firmware 3bebb5a amdgpu: update picasso to latest 19.20 firmware 05dbae6 drm/i915/firmware: Add v33 of GuC for ICL 786f17a drm/i915/firmware: Add v33 of GuC for KBL aae0eb5 drm/i915/firmware: Add v33 of GuC for SKL 9cf240f drm/i915/firmware: Add v33 of GuC for GLK 8a0a6a6 drm/i915/firmware: Add v33 of GuC for BXT 70e4394 linux-firmware: rsi: add firmware image for redpine 9116 chipset fd69a5d linux-firmware: Add firmware file for Intel Bluetooth AX201 7ae3a09 Merge tag 'iwlwifi-fw-2019-06-20' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware 90e6845 iwlwifi: add new firmwares for integrated 22000 series 71ef30c iwlwifi: update FW for 22000 to Core45-96 e58cbf7 iwlwifi: update FWs for 9000 series to Core45-96 b443218 iwlwifi: update Core45 FWs for 22260, 9000 and 9260 5157165 iwlwifi: udpate -36 firmware for 8000 series This commit was created with the help of the make-package-update-commit.sh script. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* wireless-regdb: fix build when python2 from package feeds existsPetr Štetiar2019-08-041-1/+1
| | | | | | | | | | | | | | | wireless-regdb fails to build if there is python2 installed from package feeds, as staging_dir/hostpkg/bin/python is python2 and staging_dir/hostpkg/bin takes precedence over staging_dir/host/bin (proper place with python -> python3 symlink) which leads to the build failure of wireless-regdb, so this patch makes it explicit which python should be used. Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Tested-by: Russell Senior <russell@personaltelco.net> Tested-by: Lucian Cristian <lucian.cristian@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* linux-firmware: fix RPi 4 NVRAMÁlvaro Fernández Rojas2019-08-031-0/+2
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* wireless-regdb: fix patch fuzzKevin Darbyshire-Bryant2019-07-301-1/+1
| | | | | | Refresh patches to tidy up some fuzz warnings Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* wireless-regdb: fix Makefile indentationJohn Crispin2019-07-301-5/+5
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* wireless-regdb: set PKGARCH:=allPetr Štetiar2019-07-261-0/+1
| | | | | | | | As it's an architecture-independent binary file. Ref: https://github.com/openwrt/openwrt/pull/1521#issuecomment-514687053 Suggested-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* wireless-regdb: prefer python provided by make variablePetr Štetiar2019-07-261-1/+1
| | | | | | Usage of predefined make variables is preferred. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* wireless-regdb: update to 2019.06.03Zachary Riedlshah2019-07-262-260/+8
| | | | | | | | | | | | | | Fixes build issues on a python3 host (issues with the print statement formatting in the current build). Includes 100-regdb-write-firmware-file-format-version-code-20.patch and other fixes. Closes bugs.openwrt.org/index.php?do=details&task_id=1605. Uses the tarball as requested. Signed-off-by: Zachary Riedlshah <git@zacharyrs.me>
* layerscape: convert to python3 for rcwYangbo Lu2019-07-263-82/+548
| | | | | | | | Python 2.7 will not be maintained past 2020. Let's convert to python3 for rcw. Also drop byte swapping since TF-A had been already used which handled byte swapping instead. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* brcm2708: switch to linux-firmware SDIO NVRAMÁlvaro Fernández Rojas2019-07-141-41/+6
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* linux-firmware: add RPi SDIO NVRAM packagesÁlvaro Fernández Rojas2019-07-141-0/+36
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k-firmware: Fix mirror hashHauke Mehrtens2019-07-071-1/+1
| | | | | Fixes: 7f79882d44ba ("ath10k-firmware: update board-2.bin for community firmwares") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-firmware: update board-2.bin for community firmwaresChristian Lamparter2019-07-071-3/+3
| | | | | | | | This patch updates the board-2.bin for the default IPQ4019, QCA9984 and QCA9888 ath10k-firmware-xyz-ct and -ct-htt firmwares. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* linux-firmware: update to 20190618Christian Lamparter2019-06-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update linux-firmware to 20190618. git log --pretty=oneline --abbrev-commit 20190416..20190618 acb56f2 cavium: Add firmware for CNN55XX crypto driver. a03f1a0 linux-firmware: Update firmware file for Intel Bluetooth 22161 abb7cb6 linux-firmware: Update firmware file for Intel Bluetooth 9560 1e8253b linux-firmware: Update firmware file for Intel Bluetooth 9260 c436aaf linux-firmware: Update AMD SEV firmware 6ae3652 linux-firmware: update licence text for Marvell firmware 1884732 linux-firmware: update firmware for mhdp8546 87b35ca linux-firmware: rsi: update firmware images for Redpine 9113 chipset 55edf52 imx: sdma: update firmware to v3.5/v4.5 93d56c0 nvidia: update GP10[2467] SEC2 RTOS with the one already used on GP108 1f8ebdf linux-firmware: Update firmware file for Intel Bluetooth 8265 bccb385 linux-firmware: Update firmware file for Intel Bluetooth 9260 29a536a linux-firmware: Update firmware file for Intel Bluetooth 9560 cedd500 linux-firmware: Update firmware file for Intel Bluetooth 22161 e04cc56 amlogic: add video decoder firmwares 95a9353 iwlwifi: update -46 firmwares for 22260 and 9000 series 68040ce iwlwifi: add firmware for 22260 and update 9000 series -46 firmwares fdfb153 iwlwifi: add -46.ucode firmwares for 9000 series 92e17d0 amdgpu: update vega20 to the latest 19.10 firmware 7536c3b amdgpu: update vega12 to the latest 19.10 firmware 2579167 amdgpu: update vega10 to the latest 19.10 firmware 4ea5c73 amdgpu: update polaris11 to the latest 19.10 firmware 4475802 amdgpu: update polaris10 to the latest 19.10 firmware f9551dc amdgpu: update raven2 to the latest 19.10 firmware 9eaa40d amdgpu: update raven to the latest 19.10 firmware 3c1ab75 amdgpu: update picasso to the latest 19.10 firmware 8e3e08c linux-firmware: update fw for qat devices cdef971 Mellanox: Add new mlxsw_spectrum firmware 13.2000.1122 13d6bc8 drm/i915/firmware: Add ICL HuC v8.4.3238 1dbb095 drm/i915/firmware: Add ICL GuC v32.0.3 77b6b40 drm/i915/firmware: Add GLK HuC v03.01.2893 f8521cc drm/i915/firmware: Add GLK GuC v32.0.3 9fb9526 drm/i915/firmware: Add KBL GuC v32.0.3 3fbec60 drm/i915/firmware: Add SKL GuC v32.0.3 c7e32a1 drm/i915/firmware: Add BXT GuC v32.0.3 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: package Broadcom BNX2X driverPetko Bordjukov2019-06-201-0/+9
| | | | | | | | | | bnx2x driver support for the x86 architecture. Includes module and firmware for Broadcom QLogic 5771x/578xx 10/20-Gigabit ethernet adapters. Signed-off-by: Petko Bordjukov <bordjukov@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [added +kmod-lib-zlib-inflate as well]
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-23 20:17:15 +0000