aboutsummaryrefslogtreecommitdiffstats
path: root/package/firmware
Commit message (Collapse)AuthorAgeFilesLines
* ath10k-ct-firmware: Update to latest firmwares.Ben Greear2016-11-221-6/+6
| | | | | | | | | | | | The 10.1 includes a good many stability fixes related to the effort of backporting upstream 10.2 firmware. Also enables 802.1q vlan support. Successfully tested on apu2. The 10.4 firmwares including new backported code as well as stability fixes. 10.4 has been tested on Fedora x86-64 platforms, but not on LEDE specifically since I had issues compiling LEDE for my 9980/9984 AP hardware. Signed-off-by: Ben Greear <greearb@candelatech.com>
* package/firmware/fman-ucode: Use HTTPSDaniel Engberg2016-11-161-1/+1
| | | | | | Change URL to use HTTPS instead of HTTP Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* layerscape: add 64b/32b target for ls1012ardb deviceYutang Jiang2016-10-312-2/+94
| | | | | | | | | | | | | | | | | | | | | | | | The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* layerscape: add 64b/32b target for ls1043ardb deviceYutang Jiang2016-10-312-0/+171
| | | | | | | | | | | | | | | | | | Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* ath10k-firmware: update qca9984 firmwarePavel Kubelun2016-10-311-2/+3
| | | | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> [Jo-Philipp Wich: add mirror sha256 sum] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Latest ath10k CT 988X firmware (beta-18).Ben Greear2016-10-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | * Backport much of the 10.2 firmware features from upstream QCA driver. This includes ANI support, adaptive CCA, tx-hang workarounds, and lots of other things. Not all of this may be enabled at this point, and more code waits to be backported as time and motivation allows. * Fix some rate-control issues where ath10k in station mode (at least), would sometimes get stuck at low rates. This appeared to be a probe related state machine issue in the firmware, so I added some timeout logic to kick the state machine if it gets stuck. This signicantly improves throughput tests with many stations. * Support configuring WMI WD timeout using SET_SPECIAL API. * Properly configure the rx-mask on bootup to work around problem found by Mr. Kazior. This should remove the need to add the driver hack he posted. * Allow configuring pdev failed-retry threshold. This is how many consecutive tx failures the firmware will allow before resetting the wifi chip (not a full firmware crash). Signed-off-by: Ben Greear <greearb@candelatech.com>
* source: Switch to xz for packages and tools where possibleDaniel Engberg2016-10-061-2/+2
| | | | | | | | | | | * Change git packages to xz * Update mirror checksums in packages where they are used * Change a few source tarballs to xz if available upstream * Remove unused lines in packages we're touching, requested by jow- and blogic * We're relying more on xz-utils so add official mirror as primary source, master site as secondary. * Add SHA256 checksums to multiple git tarball packages Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* brcmfmac43430-firmware: remove package and switch to linux-firmwareÁlvaro Fernández Rojas2016-09-292-63/+9
| | | | | | | Now that the firmware for BCM43430 has been submitted to linux-firmware use it and remove RPiDistro package. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k-firmware: move to firmware section in buildrootStijn Segers2016-09-281-4/+16
| | | | | | | This patch moves the ath10k firmware packages to the firmware submenu in the buildroot, where it belongs. Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
* ath10k-firmware: update the qca988x firmware to 10.2.4.70.54Martin Blumenstingl2016-09-281-13/+5
| | | | | | | | | | | | | | Use firmware version 10.2.4.70.54 from kvalo's git repository. The old version (even though it's version number is greater) is an old version from September 2015. Using only the firmware versions from kvalo's git repo is recommended, because those are tested by QCA's internal QCA. The QCA988X directory received a small reorganization as a "hw2.0" subdirectory was added - this patch also takes care of that as board.bin was moved to that subdirectory. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* linux-firmware: Add mirrorsdiizzyy2016-09-271-1/+3
| | | | | | | Adds Google's mirrors as primary source and kernel.org as fallback. Discussed in #lede-dev on Freenode Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* linux-firmware: update to current Git headJo-Philipp Wich2016-09-231-3/+3
| | | | | | | | | | | | | | | | | | | Update the linux-firmware package in order to force the buildbots to fetch the proper mirrored version. Currently each builder has its own copy of the linux-firmware checkout staged in its own dl/, since the package was updated before the mirrored copy has been uploaded. The builders then subsequently uploaded their own copy instead, leading to md5sum mismatches since each clone produces different tarballs. By bumping the package to a new version and uploading the mirrored archive with the proper md5sum beforehand, the builders will fetch that instead and not upload their own copies. To properly solve that problem in the future we need to ensure that packed checkouts become reproducable. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* linux-firmware: update md5sumJo-Philipp Wich2016-09-221-1/+1
| | | | | | | | | | | | Since the md5sum of the mirrored Git clone archive has been set in the Makefile before that particular archive was uploaded to the source mirror, the buildbots uploaded their own, different copy instead invalidating the mirror md5sum for anyone else. In order to fix the mismatch, update the md5sum to reflect the archive being present on the download server. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* dsl-vrx200-firmware-xdsl: update to more recent versionsHauke Mehrtens2016-09-201-7/+7
| | | | | | | | | | The Annex A firmware will be updated to: 05.08.01.08.01.06_05.08.00.0B.01.01_osc The Annex B firmware will be updated to: 05.07.09.09.00.06_05.07.04.04.00.02_osc Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
* linux-firmware: update to the commit from 2016-09-15Rafał Miłecki2016-09-161-3/+3
| | | | | | This adds e.g. BCM43430 firmware (not packaged yet). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* linux-firmware: rename r8188eu-firmware to rtl8188eu-firmwareÁlvaro Fernández Rojas2016-09-151-3/+3
| | | | | | This is consistent with the names used for other realtek firmwares. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcmfmac43430-firmware: rename to brcmfmac-firmware-43430-sdioÁlvaro Fernández Rojas2016-09-151-6/+6
| | | | | | This is consistent with the rest of brcmfmac firmwares. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* linux-firmware: separate packages for Broadcom FullMAC SDIO firmwaresÁlvaro Fernández Rojas2016-09-151-3/+9
| | | | | | | | | | | | Using few packages will allow saving some space by decreasing rootfs size. Moreover there are more firmware files that may require packaging and even more to come later. This can especially useful now, with per device rootfs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* linux-firmware: separate packages for Broadcom FullMAC PCIe firmwaresRafał Miłecki2016-09-131-3/+9
| | | | | | | | | | | | | Using few packages will allow saving some space by decreasing rootfs size. Dropping 43602a1 firmware saves 316 580 B. Dropping 4366b1 saves 468 188 B. Moreover there are more firmware files that may require packaging and even more to come later (e.g. 4366c0). This can especially useful now, with per device rootfs. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ath10k-firmware: add QCA9887 firmwareZhao Gang2016-09-021-0/+40
| | | | | | QCA9887 is experimentally supported in compat-wireless-2016-06-20. Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
* ath10k-firmware: Update to latest ath10k-ct 9984 firmware.Ben Greear2016-08-281-2/+2
| | | | | | | | Tested briefly on Netgear r7800. Firmware failed to load on first boot, but then it worked after that and I could not reproduce the failure. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-fw: Update to latest 9980 CT firmware.Ben Greear2016-08-281-2/+2
| | | | | | This fixes a nasty memory corruption bug, among other things. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-firmware: Update to latest 99X0 CT firmware.Ben Greear2016-08-111-2/+2
| | | | | | | | | | Among other things, this compiles out support for peer caching. The feature did not seem to work well in my testing of AP mode, and totally breaks my own special use of station mode. Briefly tested on ea8500. Signed-off-by: Ben Greear <greearb@candelatech.com>
* brcmfmac43430-firmware: update to v7.45.41.26Álvaro Fernández Rojas2016-07-281-3/+3
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k: Support installing CT firmware for QCA9984 NICs.Ben Greear2016-07-231-0/+35
| | | | | | | | | This firmware has been lightly tested on non LEDE system to date, and will be undergoing further testing and development. Allow users to easily install this on their LEDE system as they prefer. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct-firmware: Update to latest 9880 firmware.Ben Greear2016-07-231-2/+2
| | | | | | Fixes some issues with AES encryption and macbooks. Signed-off-by: Ben Greear <greearb@candelatech.com>
* add ath10k-ct: Candela-Tech ath10k out-of-tree driver.Ben Greear2016-07-141-1/+1
| | | | | | | | | | This lets one use the CT ath10k driver instead of the built-in ath10k driver from the upstream kernel (or backports). This should be a drop-in replacement, as well as enabling better CT firmware support. Signed-off-by: Ben Greear <greearb@candelatech.com>
* prism54-firmware: change prism54/p54-firmware package versioningChristian Lamparter2016-07-071-8/+11
| | | | | | | | | | | | There are multiple prism54/p54 firmware versions for different drivers and devices. Therefore, assigning the package version of all the different firmware packages on the old prism54 firmware could break if any of the p54 firmwares are updated and we need to roll out new packages. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [removed PKG_VERSION] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-firmware: add symlink for QCA9984 board.binFelix Fietkau2016-07-021-0/+3
| | | | | | | Use first caldata for devices without OTP. The driver uses the caldata instead of the board.bin data anyway Signed-off-by: Felix Fietkau <nbd@nbd.name>
* prism54-firmware: add also other p54 firmware to own packageHauke Mehrtens2016-06-301-2/+71
| | | | | | Extract the other p54 firmware files into the prism54-firmware package. Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
* firmware: extract prism54-firmware into own packageHauke Mehrtens2016-06-301-0/+39
| | | | | | | | | | | | | Instead of downloading the firmware for prism54 devices in the wireless.mk do it in an extra package Makefile. To ship the complete source code Intel ships our modified OpenWrt/LEDE + the content of the dl directory. We do not want to have any files in the dl/ directory which are not needed to build our images. The prism54 gets downloaded every time independently of building kmod-net-prism54 or not. When it is in a own package it only gets downloaded when the firmware package is selected. Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
* linux-firmware: fix md5sumHauke Mehrtens2016-06-251-1/+1
| | | | | | | | The copy on the mirror has a different md5sum as specified in this package Makefile. The content of the file on the mirror is the same as in the checkout so just update our md5sum. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* rtl8192su-firmware: move firmware to own packageHauke Mehrtens2016-06-251-0/+7
| | | | | | | Instead of downloading the firmware from some website take it from linux-firmware package and do not download it separately any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* rtl8192se-firmware: fix package buildHauke Mehrtens2016-06-251-1/+1
| | | | | | | The package did not pack the firmware because of a problem which looks like a copy and past error. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* packages: prefer http over git for git protocolHauke Mehrtens2016-06-222-2/+2
| | | | | | | | | In company networks everything except the http and https protocol is often causes problems, because the network administrators try to block everything else. To make it easier to use LEDE in company networks use the https/http protocol for git access when possible. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-ct: Update to latest 10.4.3 CT firmware for 9980 chipsets.Ben Greear2016-06-211-2/+2
| | | | | | This works around regressions added in the 4.7 kernel. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-firmware: fix board-2.bin download URLKevin Darbyshire-Bryant2016-06-211-2/+2
| | | | | | | | | Original URL got 303 redirect which then also dropped the commit id leading to different file revision & MD5 mismatch. Corrected URL & clarified commit ID use in Makefile Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* ath10k-firmware: add QCA9984 firmwarePavel Kubelun2016-06-131-1/+17
| | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* treewide: replace nbd@openwrt.org with nbd@nbd.nameFelix Fietkau2016-06-072-2/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k: support CT firmware choices.Ben Greear2016-06-051-0/+75
| | | | | | | | | | | | | | | | This allows one to select CT firmware for ath10k if one prefers to try this firmware instead of stock ath10k firmware. The 10.1 (988X) firmware can actually be installed beside the default firmware, but it will not be used as long as the firmware-5.bin file exists. Users could rename the files and reboot to use different images. The 99X0 (wave-2) firmware uses the same firmware-5.bin name as default firmware, so it cannot be installed at the same time as default firmware. Signed-off-by: Ben Greear <greearb@candelatech.com>
* package: flag further target specific packages as nonsharedJo-Philipp Wich2016-04-264-0/+8
| | | | | | | Add nonshared flag to package depending on specific targets or subtargets as there's no guarantee otherwise that they'll be available in the shared repo. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* brcmfmac43430-firmware: improve package version and releaseÁlvaro Fernández Rojas2016-04-161-4/+4
| | | | | | Use git revision as package release and date for package version. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcmfmac43430-firmware: use @GITHUB download aliasÁlvaro Fernández Rojas2016-04-031-0/+2
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcmfmac43430-firmware: switch to @GITHUB download aliasJohn Crispin2016-04-091-1/+1
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 49139
* brcmfmac43430-firmware: add new packageJohn Crispin2016-04-011-0/+61
| | | | | | | | This adds the firmware needed for the BCM43438 included in Raspberry Pi 3. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 49102
* linux-firmware: fix rt73-usb-firmware packageHauke Mehrtens2016-03-191-2/+2
| | | | | | | | | | | | | Some parts of this package were named rt73-pci-firmware before which looks like a copy and past error. This renames all parts to rt73-usb- firmware and then the firmware gets build and the dependencies from the package with the kernel module are also working correctly. This fixes #22069 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 49037
* dsl-vrx200-firmware-xdsl: create Lantiq vrx200 firmware patchesFelix Fietkau2016-03-073-94/+129
| | | | | | | | | | | Instead of having two big binaries only add one binary and then a patch to create the other one when needed at runtime. This is easier to handle in one Makefile for both firmware files. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48939
* mac80211: add packages libertas-spi module and firmwareFelix Fietkau2016-02-221-0/+10
| | | | | | | | | This adds option to build kernel module and firmware packages for a Marvell 8686 SPI Wireless device Signed-off-by: Joseph Honold <mozzwald@gmail.com> SVN-Revision: 48750
* linux-firmware: package BCM4366 firmwareRafał Miłecki2016-02-081-0/+3
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48654
* linux-firmware: update to the commit from 2016-01-25Rafał Miłecki2016-01-281-2/+2
| | | | | | | | This adds e.g. BCM4350 rev 5 and BCM4366 firmwares (not packaged yet). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48544
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 22:27:58 +0000