aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot
Commit message (Collapse)AuthorAgeFilesLines
* uboot-lantiq: switch to using u-boot.mkFelix Fietkau2017-01-241-259/+209
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-kirkwood: add uboot for nsa310bAlberto Bursi2017-01-243-9/+745
| | | | | | | | | | | | this commit allows to make a standalone u-boot for nsa310b. While both first-stage and second-stage u-boot work fine if installed to flash or loaded with kwboot, I could not get stock u-boot nor bodhi's u-boot to chainload any second stage u-boot (I also tried with dockstar's uboot that works fine on this device if loaded with kwboot). Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* packages: mark packages depending on a target as nonsharedMathias Kresin2017-01-243-0/+6
| | | | | | | | | The packages can't be build as shared packages due to the unmet dependencies. Fixes FS#418. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: fix build issueFelix Fietkau2017-01-221-2/+3
| | | | | | | Do not reference BIN_DIR in the package install section directly, use $(1) instead. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-mvebu: enable loader with the default profileFelix Fietkau2017-01-081-1/+1
| | | | | | Fixes build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-sunxi: enable parallel buildFelix Fietkau2017-01-051-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-sunxi: add uboot-sunxi-all for selecting all other variantsYousong Zhou2017-01-051-142/+50
| | | | | | | | | While at it, the following changes are introduced - Rewrite the Makefile for better readability - Make parallel builds possible Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* uboot-lantiq: fix boot of images larger than 8MBMathias Kresin2017-01-0212-12/+36
| | | | | | | | Increasing CONFIG_SYS_BOOTM_LEN from 8 MB to 16 MB is necessary to support uncompressing images larger than 8 MB when using the bootm command. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: fix build with gcc6Mathias Kresin2017-01-022-87/+852
| | | | | | | Backport u-boot commit 9b2c282b348dfe966bbba967dc7a45ce817cce50 to fix compile with gcc5 and gcc6. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build codeFelix Fietkau2016-12-244-34/+39
| | | | | | | Update the correspoding u-boot configs to stop relying on kernel-in-rootfs, which was removed a while back Signed-off-by: Felix Fietkau <nbd@nbd.name>
* treewide: clean up and unify PKG_VERSION for git based downloadsFelix Fietkau2016-12-223-12/+6
| | | | | | Also use default defintions for PKG_SOURCE_SUBDIR, PKG_SOURCE Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kexec-tools: remove useless CONFIG_KEXEC_TOOLS_TARGET_NAME indirectionFelix Fietkau2016-12-202-11/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kexec-tools: build by default, even if CONFIG_KERNEL_KEXEC is unsetFelix Fietkau2016-12-201-1/+1
| | | | | | | Helps find build issues and makes the package available on snapshot builds Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kexec-tools: enable support for x86_64Felix Fietkau2016-12-201-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kexec-tools: update to 2.0.14-rc1, fix build errorsFelix Fietkau2016-12-207-321/+24
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kexec-tools: fix compile errorGilles Mazoyer2016-12-201-0/+11
| | | | | | When compiling file vmcore-dmesg.c, several errors "unknown type name 'loff_t'" Signed-off-by: Gilles Mazoyer <mazoyer.gilles@omega.ovh>
* grub2: upgrade to 2.02-beta3 (3 years newer than previous)Alexandru Ardelean2016-12-204-50/+10
| | | | | | | | '100-musl-compat.patch' does not seem to be required anymore. '210-fix_serial_rtscts.patchi' is superseeded by: http://git.savannah.gnu.org/cgit/grub.git/commit/?id=bac5d1a64ab4191058a8fd4c05f6b3b339e249e7 Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* grub2: disable 'check-macro-version' build rule in 'po' buildAlexandru Ardelean2016-12-201-0/+13
| | | | | | | | This seems to occur when gettext-full is built on the host-side and the autoreconf stuff re-generates some of the build files, except for the po/Makefile.in.in Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* grub2: do not generate mkfonts at build timeAlexandru Ardelean2016-12-201-0/+7
| | | | | | | | | | Even though these fonts may not be installed, they seem to be generated at build time. Seems that the configure script re-generated from configure.ac is a bit more annoying than it has to be. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* grub2: add PKG_FIXUP:=autoreconfAlexandru Ardelean2016-12-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reboot of: a0ea22ac430f91ab045431a79b2e2161e66cd56a Reverted: 3c52cbfa53056ded95ae5a7ae27319eafd5a37e5 The host-side build of grub2 requires this sometimes. This will re-generate the ./configure script from configure.ac. I don't know the conditions of how this reproduces, it just sometimes appears, and sometimes doesn't. Build error ``` <lede-dir>/build_dir/target-x86_64_musl-1.1.15_yogi/host/grub-2.02~beta2/build-aux/missing: line 81: aclocal-1.14: command not found WARNING: 'aclocal-1.14' is missing on your system. You should only need it if you modified 'acinclude.m4' or 'configure.ac' or m4 files included by 'configure.ac'. The 'aclocal' program is part of the GNU Automake package: <http://www.gnu.org/software/automake> It also requires GNU Autoconf, GNU m4 and Perl in order to run: <http://www.gnu.org/software/autoconf> <http://www.gnu.org/software/m4/> <http://www.perl.org/> Makefile:3962: recipe for target 'aclocal.m4' failed ``` Adding PKG_FIXUP adds sanity (i.e. autoreconf is used for host & target builds) over just using HOST_FIXUP. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* uboot-envtools: drop executable file attribute from files/ipqPiotr Dymacz2016-12-201-0/+0
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: fix Edimax BR-6425 board namePiotr Dymacz2016-12-201-1/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: fix code formatting style in uci-defaults filesPiotr Dymacz2016-12-207-61/+62
| | | | | | | | | | Few minor code formatting style fixes, including: - keep one board per line - always use "|\" (for consistency) - remove redundant double quotes and empty lines Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: keep boards in alphabetical orderPiotr Dymacz2016-12-204-15/+15
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* treewide: clean up download hashesFelix Fietkau2016-12-1623-20/+23
| | | | | | Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-envtools: add support for YunCore SR3200 and XD3200Piotr Dymacz2016-12-121-1/+3
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* layerscape: add 64b/32b target for ls1046ardb deviceYutang Jiang2016-12-122-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | Add support for NXP layerscape ls1046ardb 64b/32b Dev board. LS1046ARDB Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 512 Mbyte NAND flash * Two 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card * On-board 4G eMMC Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: * PCIe1 (SerDes2 Lane0) to miniPCIe slot * PCIe2 (SerDes2 Lane1) to x2 PCIe slot * PCIe3 (SerDes2 Lane2) to x4 PCIe slot * USB 3.0: one super speed USB 3.0 type A port, one Micro-AB port * UART: supports two UARTs up to 115200 bps for console Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* layerscape: uboot-layerscape: prefer github over git.freescale.comYutang Jiang2016-12-1295-18498/+9
| | | | | | | In order to prevent the impact of the merger of the company and the potential rebase of the SDK repositories, migrate the u-boot source to github. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* uboot-lantiq: Add BT Home Hub 5A supportMathias Kresin2016-11-292-0/+352
| | | | | | | | | | | | | | | | | | Based on the submission to the uboot-lantiq repo by Martin Blumenstingl. Use the ddr_settings.h from the GPL tarball. The NAND boot optimized one (with memory tuning enabled) doesn't work for the UART boot image. Use the same mtd layout as the stock u-boot. Add add UBI support. Use the leds to indicate boot status like it is done with the stock u-boot. Switch on the red power led if kernel image can't be loaded. Otherwise switch the green led on. Make only the ramboot u-boot available. Only this image is required for the first installation of LEDE. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-envtools: make it not sharedEddi De Pieri2016-11-231-0/+2
| | | | | | | | | | | | uboot-envtools have some stuff related to the cpu. This should fix following error on lantiq soc: Downloading http://downloads.lede-project.org/snapshots/packages/mips_24kc/base/uboot-envtools_2015.10-1_mips_24kc.ipk. Configuring uboot-envtools. //usr/lib/opkg/info/uboot-envtools.postinst: .: line 10: can't open '/lib/ar71xx.sh' Signed-off-by: Eddi De Pieri <eddi@depieri.net>
* uboot-lantiq: vgv7519 fix tftp loading of big kernel/image sizeEddi De Pieri2016-11-231-1/+3
| | | | | | | | | | | | | | | | | | On my board: Bytes transferred = 7084442 (6c199a hex) Image Name: MIPS OpenWrt Linux-3.10.49 Created: 2014-11-11 17:40:00 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 7084378 Bytes = 6.8 MiB Load Address: 80002000 Entry Point: 80002000 Verifying Checksum ... OK Uncompressing Kernel Image ... LZMA: uncompress or overwrite error 7 - must RESET b ROM VER: 1.0.5 CFG 01 Signed-off-by: Eddi De Pieri <eddi@depieri.net>
* Revert "grub2: add PKG_FIXUP:=autoreconf"John Crispin2016-11-211-1/+0
| | | | | | | | this caused build errors on x86 This reverts commit a0ea22ac430f91ab045431a79b2e2161e66cd56a. Signed-off-by: John Crispin <john@phrozen.org>
* grub2: add PKG_FIXUP:=autoreconfAlexandru Ardelean2016-11-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The host-side build of grub2 requires this sometimes. This will re-generate the ./configure script from configure.ac. I don't know the conditions of how this reproduces, it just sometimes appears, and sometimes doesn't. Build error ``` <lede-dir>/build_dir/target-x86_64_musl-1.1.15_yogi/host/grub-2.02~beta2/build-aux/missing: line 81: aclocal-1.14: command not found WARNING: 'aclocal-1.14' is missing on your system. You should only need it if you modified 'acinclude.m4' or 'configure.ac' or m4 files included by 'configure.ac'. The 'aclocal' program is part of the GNU Automake package: <http://www.gnu.org/software/automake> It also requires GNU Autoconf, GNU m4 and Perl in order to run: <http://www.gnu.org/software/autoconf> <http://www.gnu.org/software/m4/> <http://www.perl.org/> Makefile:3962: recipe for target 'aclocal.m4' failed ``` Adding PKG_FIXUP adds sanity (i.e. autoreconf is used for host & target builds) over just using HOST_FIXUP. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* uboot-envtools: add 'dockstar' for kirkwoodPaul Wassi2016-11-211-0/+1
| | | | | | Add board 'dockstar' to known fw_env-configurations. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* uboot-envtools: add support for YunCore CPE830Piotr Dymacz2016-11-211-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for YunCore CPE870Piotr Dymacz2016-11-211-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for YunCore AP90QPiotr Dymacz2016-11-211-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* layerscape: uboot: using perl script:byte_swap.pl to replace tcl ↵Yutang Jiang2016-11-161-0/+72
| | | | | | script:byte_swap.tcl Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* yamonenv: move to Boot Loaders submenuAlberto Bursi2016-11-081-0/+1
| | | | | | Boot Loaders submenu is the place where all other boot loaders are. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* uboot-envtools: move to Boot Loaders submenuAlberto Bursi2016-11-031-0/+1
| | | | | | Boot Loaders submenu is where other bootloader tools (fconfig and grub2-editenv) are. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* uboot-sunxi: fix default config for OLIMEX A13 SOM (FS#239)Jo-Philipp Wich2016-11-0220-277/+58
| | | | | | | | | | | | | | | | | | The current uboot default config for the A13 SOM erroneously enables support for the AXP209 power regulator IC which is not present on the board. This superfluous support module sets an incorrect initial clock frequency and confuses the kernel, ultimately leading to a boot failure later on. Properly disable the PMIC support and enable the EHCI support by translating the deprecated SYS_EXTRA_OPTIONS values into proper SUNXI_NO_PMIC and USB_EHCI_HCD symbols respectively. Also rename 002-add-olimex-a13-som.diff to 002-add-olimex-a13-som.patch and refresh the remaining patches of the series while we're at it. Reported-by: Mario Fischer <mario-fischer@web.de> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* layerscape: add 64b/32b target for ls1012ardb deviceYutang Jiang2016-10-3190-3/+17952
| | | | | | | | | | | | | | | | | | | | | | | | The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* layerscape: add 64b/32b target for ls1043ardb deviceYutang Jiang2016-10-317-0/+661
| | | | | | | | | | | | | | | | | | Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* uboot-kirkwood: fix default bootcmd for Seagate DockstarPaul Wassi2016-10-271-1/+1
| | | | | | | Fix the default value for the 'bootcmd' environment variable. Therefore make the default bootcmd work for buildbot's images. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* uboot-kirkwood: bump to upstream 2016.09.01Paul Wassi2016-10-2717-385/+52
| | | | | | | Bump U-Boot for Kirkwood to upstream 2016.09.01. Local patches cleaned up and reworked. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* ar71xx: add support for D-Link DAP-2695 rev. A1Stijn Tintel2016-10-271-0/+1
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
* grub2: add missing SECTION variable and remove non breaking spaceJo-Philipp Wich2016-10-261-1/+2
| | | | | | | | Fix metadata scan failure in the grub2 package by removing an unexpected invisible space character and by adding back the missing SECTION variable which was removed with d140648. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* package/uboot-envtools: Add support for ZyXEL NBG6817André Valentin2016-10-261-0/+3
| | | | Signed-off-by: André Valentin <avalentin@marcant.net>
* uboot-zynq: fix compile error for be short of dtcYutang Jiang2016-10-261-1/+2
| | | | | | | | | | | | | | | | | While enable zynq uboot: CONFIG_PACKAGE_uboot-zynq-zc702 CONFIG_PACKAGE_uboot-zynq-zed CONFIG_PACKAGE_uboot-zynq-zybo make will arise dtc error: ./scripts/dtc-version.sh: line 17: dtc: command not found ./scripts/dtc-version.sh: line 18: dtc: command not found *** Your dtc is too old, please upgrade to dtc 1.4 or newer make[4]: *** [checkdtc] Error 1 Pass the kernel dtc to uboot for compile. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* grub2: move to Boot Loaders categoryAlberto Bursi2016-10-261-3/+2
| | | | | | | | | | because boot loaders are in Boot Loaders, not in Utilities -> Boot Loaders Also moved brub2-editenv in Utilities -> Boot Loaders Part of a wider housekeeping effort on the packages repository. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 19:14:34 +0000