aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot
Commit message (Collapse)AuthorAgeFilesLines
* ath79: add support for the Netgear WNDRMAC v1Renaud Lepage2020-06-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Netgear WNDRMAC v1 is a hardware variant of the Netgear WNDR3700 v2 Specifications ============== * SoC: Atheros AR7161 * RAM: 64mb * Flash on board: 16mb * WiFi: Atheros AR9220 (a/n), Atheros AR9223 (b/g/n) * Ethernet: RealTek RTL8366SR (1xWAN, 4xLAN, Gigabit) * Power: 12 VDC, 2.5 A * Full specs on [openwrt.org](https://openwrt.org/toh/hwdata/netgear/netgear_wndrmac_v1) Flash Instructions ================== It is possible to use the OEM Upgrade page to install the `factory` variant of the firmware. After the initial upgrade, you will need to telnet into the router (default IP 192.168.1.1) to install anything. You may install LuCI this way. At this point, you will have a web interface to configure OpenWRT on the WNDRMAC v1. Please use the `sysupgrade` variant for subsequent flashes. Recovery Instructions ===================== A TFTP-based recovery flash is possible if the need arises. Please refer to the WNDR3700 page on openwrt.org for details. https://openwrt.org/toh/netgear/wndr3700#troubleshooting_and_recovery Signed-off-by: Renaud Lepage <root@cybikbase.com> [update DTSI include name] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: rename Linksys devices based on their common namesPaul Spooren2020-06-051-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Linksys devices in mvebu target feature a mixed naming, where parts are based on the official product name (device node, image; e.g. WRT3200ACM) and parts are based on the internal code name (DTS file name, compatible, LED labels; e.g. rango). This inconsistent naming has been perceived as quite confusing. A recent attempt by Paul Spooren to harmonize this naming in kernel has been declined there. However, for us it still makes sense to apply at least a part of these changes locally. Primarily, this patch changes the compatible in DTS and thus the board name used in various scripts to have them in line with the device, model and image names. Due to the recent switch from swconfig to DSA, this allows us to drop SUPPORTED_DEVICES and thus prevent seamless upgrade between these incompatible setups. However, this does not include the LED label rename from Paul's initial patch: I don't think it's worth keeping the enormous diff locally for this case, as we can implement this much easier in 01_leds if we have to live with the inconsistency anyway. Signed-off-by: Paul Spooren <mail@aparcar.org> [rebase, extend to all devices, drop DT LED changes] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* uboot-mxs: bump to v2020.04Michael Heimpold2020-06-032-34/+36
| | | | | | Also update the U-Boot BSP patch for I2SE Duckbill devices. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* packages/boot: remove rbcfgThibaut VARÈNE2020-05-286-1349/+0
| | | | | | | The new sysfs soft_config driver makes buggy rbcfg obsolete and entirely replaces it. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* uboot-envtools: ath79: add Netgear WNDR4300SWStijn Segers2020-05-261-1/+2
| | | | | | Add Netgear WNDR4300SW to the list of supported boards. Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* ramips: Add support for Xiaomi Redmi Router AC2100 (RM2100)Richard Huynh2020-05-201-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - CPU: MediaTek MT7621A - RAM: 128 MB DDR3 - FLASH: 128 MB ESMT NAND - WIFI: 2x2 802.11bgn (MT7603) - WIFI: 4x4 802.11ac (MT7615) - ETH: 3xLAN+1xWAN 1000base-T - LED: Power, WAN, in Amber and White - UART: On board near ethernet, opposite side from power - Modified u-boot Installation: 1. Run linked exploit to get shell, startup telnet and wget the files over 2. mtd write openwrt-ramips-mt7621-xiaomi_rm2100-squashfs-kernel1.bin kernel1 3. nvram set uart_en=1 4. nvram set bootdelay=5 5. nvram set flag_try_sys1_failed=1 6. nvram commit 7. mtd -r write openwrt-ramips-mt7621-xiaomi_rm2100-squashfs-rootfs0.bin rootfs0 Restore to stock: 1. Setup PXE and TFTP server serving stock firmware image (See dhcp-boot option of dnsmasq) 2. Hold reset button down before powering on and wait for flashing amber led 3. Release reset button 4. Wait until status led changes from flashing amber to white Notes: This device has dual kernel and rootfs slots like other Xiaomi devices currently supported (mir3g, etc.) thus, we use the second slot and overwrite the first rootfs onwards in order to get more space. Exploit and detailed instructions: https://openwrt.org/toh/xiaomi/xiaomi_redmi_router_ac2100 An implementation of CVE-2020-8597 against stock firmware version 1.0.14 This requires a computer with ethernet plugged into the wan port and an active PPPoE session, and if successful will open a reverse shell to 192.168.31.177 on port 31337. As this shell is somewhat unreliable and likely to be killed in a random amount of time, it is recommended to wget a static compiled busybox binary onto the device and start telnetd with it. The stock telnetd and dropbear unfortunately appear inoperable. (Disabled on release versions of stock firmware likely) Ie. wget https://yourip/busybox-mipsel -O /tmp/busybox chmod a+x /tmp/busybox /tmp/busybox telnetd -l /bin/sh Tested-by: David Martinez <bonkilla@gmail.com> Signed-off-by: Richard Huynh <voxlympha@gmail.com>
* ramips: add support for Linksys EA7500 v2Davide Fioravanti2020-05-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Linksys EA7500 v2 is advertised as AC1900, but its internal hardware is AC2600 capable. Hardware -------- SoC: Mediatek MT7621AT (880 MHz, 2 cores 4 threads) RAM: 256M (Nanya NT5CC128M16IP-DI) FLASH: 128MB NAND (Macronix MX30LF1G18AC-TI) ETH: 5x 10/100/1000 Mbps Ethernet (MT7530) WIFI: - 2.4GHz: 1x MT7615N (4x4:4) - 5GHz: 1x MT7615N (4x4:4) - 4 antennas: 3 external detachable antennas and 1 internal USB: - 1x USB 3.0 - 1x USB 2.0 BTN: - 1x Reset button - 1x WPS button LEDS: - 1x White led (Power) - 6x Green leds (link lan1-lan4, link wan, wps) - 5x Orange leds (act lan1-lan4, act wan) (working but unmodifiable) Everything works correctly. Installation ------------ The “factory” openwrt image can be flashed directly from OEM stock firmware. After the flash the router will reboot automatically. However, due to the dual boot system, the first installation could fail (if you want to know why, read the footnotes). If the flash succeed and you can reach OpenWrt through the web interface or ssh, you are done. Otherwise the router will try to boot 3 times and then will automatically boot the OEM firmware (don’t turn off the router. Simply wait and try to reach the router through the web interface every now and then, it will take few minutes). After this, you should be back in the OEM firmware. Now you have to flash the OEM Firmware over itself using the OEM web interface (I tested it using the FW_EA7500v2_2.0.8.194281_prod.img downloaded from the Linksys website). When the router reboots flash the “factory” OpenWrt image and this time it should work. After the OpenWrt installation you have to use the sysupgrade image for future updates. Restore OEM Firmware -------------------- After the OpenWrt flash, the OEM firmware is still stored in the second partition thanks to the dual boot system. You can switch from OpenWrt to OEM firmware and vice-versa failing the boot 3 times in a row: 1) power on the router 2) wait 15 seconds 3) power off the router 4) repeat steps 1-2-3 twice more. 5) power on the router and you should be in the “other” firmware If you want to completely remove OpenWrt from your router, switch to the OEM firmware and then flash OEM firmware from the web interface as a normal update. This procedure will overwrite the OpenWrt partition. Footnotes --------- The Linksys EA7500-v2 has a dual boot system to avoid bricks. This system works using 2 pair of partitions: 1) "kernel" and "rootfs" 2) "alt_kernel" and "alt_rootfs". After 3 failed boot attempts, the bootloader tries to boot the other pair of partitions and so on. This system is managed by the bootloader, which writes a bootcount in the s_env partition, and if successfully booted, the system add a "zero-bootcount" after the previous value. A system update performed from OEM firmware, writes the firmware on the other pair of partitions and sets the bootloader to boot the new pair of partitions editing the “boot_part” variable in the bootloader vars. Effectively it's a quick and safe system to switch the selected boot partition. Another way to switch the boot partition is: 1) power on the router 2) wait 15 seconds 3) power off the router 4) repeat steps 1-2-3 twice more. 5) power on the router and you should be in the “other” firmware In this OpenWrt port, this dual boot system is partially working because the bootloader sets the right rootfs partition in the cmdline but unfortunately OpenWrt for ramips platform overwrites the cmdline so is not possible to detect the right rootfs partition. Because all of this, I preferred to simply use the first pair of partitions and set read-only the other pair. However this solution is not optimal because is not possible to know without opening the case which is the current booted partition. Let’s take for example a router booting the OEM firmware from the first pair of partitions. If we flash the OpenWrt image, it will be written on the second pair. In this situation the router will bootloop 3 times and then will automatically come back to the first pair of partitions containg the OEM firmware. In this situation, to flash OpenWrt correctly is necessary to switch the booting partition, flashing again the OEM firmware over itself. At this point the OEM firmware is on both pair of partitions but the current booted pair is the second one. Now, flashing the OpenWrt factory image will write the firmware on the first pair and then will boot correctly. If this limitation in the ramips platform about the cmdline will be fixed, the dual boot system can also be implemented in OpenWrt with almost no effort. Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com> Co-Developed-by: Jackson Lim <jackcolentern@gmail.com> Signed-off-by: Jackson Lim <jackcolentern@gmail.com>
* mvebu: uDPU: switch default kernel and U-Boot PHY modeJakov Petrina2020-05-091-0/+43
| | | | | | | | | | | | | | | | Certain SFP modules (most notably Nokia GPON ones) first check connectivity on 1000base-x, and switch to 2500base-x afterwards. This is considered a quirk so the phylink switches the interface to 2500base-x as well. However, after power-cycling the uDPU device, network interface/SFP module will not work correctly until the module is re-seated. This patch resolves this issue by forcing the interface to be brought up in 2500base-x mode by default. Signed-off-by: Jakov Petrina <jakov.petrina@sartura.hr> Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
* layerscape: update tfa to LSDK-20.04Yangbo Lu2020-05-072-70/+36
| | | | | | | | | | | | Update tfa package to latest LSDK-20.04 dropping one patch which had already been integrated. Add fixes, - Fix DEPENDS/PKG_BUILD_DEPENDS. - Remove HIDDEN:=1. - Move intermediate files installing into Build/InstallDev. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update u-boot to LSDK-20.04Yangbo Lu2020-05-0710-97/+9
| | | | | | | | Update u-boot package to latest LSDK-20.04 dropping patches which are no longer needed. Adapt u-boot bootargs to kernel 5.4 for booting. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: define only one package for ls-rcwYangbo Lu2020-05-071-1/+1
| | | | | | | | | | We do not have to define package for each board, and consider variant's building/installing. It is easier to maintain ls-rcw with only one package installing all boards RCW binaries as intermediate files, each of which is just about hundreds of bytes. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* mediatek: add ubootJohn Crispin2020-05-045-0/+9876
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mvebu: tidy up support for GL.iNet GL-MV1000Adrian Schmutzler2020-04-271-3/+3
| | | | | | | | | | | | | | | | | This fixes a bunch of cosmetic issues with GL.iNet GL-MV1000: - apply alphabetic sorting in multiple files - use armada-3720 prefix for DTS like for other devices - fix vendor capitalization for model in DTSes - remove trivial comment in DTS files - use DEVICE_VENDOR/DEVICE_MODEL - remove redundant SUPPORTED_DEVICES - use SOC instead of DEVICE_DTS - remove empty line at EOF Fixes: 050c24f05c85 ("mvebu: add support for GL.iNet GL-MV1000") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: add support for GL.iNet GL-MV1000Li Zhang2020-04-261-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds supports for GL-MV1000. Specification: - SOC: Marvell Armada 88F3720 (1GHz) - Flash: 16MB (W25Q128FWSIG) - RAM: 1GB DDR4 - Ethernet: 3x GE (1 WAN + 2 LAN) - EMMC: 8GB EMMC (KLM8G1GETF-B041) - MicroSD: 1x microSD slot - USB: 1x USB 2.0 port(TypeA),1x USB 3.0 port(TypeC) - Button: 1x reset button,1x slide switch - LED: 3x greed LED - UART: 1x UART on PCB (JP1: 3.3V, RX, TX, GND) Update firmware instructions ============================ In the compiled,please gzip -d xxx.img.gz,then update firmware on uboot web. Signed-off-by: Li Zhang <li.zhang@gl-inet.com> [Copied dts file to files-5.4] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-envtools: fix domywifi_dw33d Bad CRC errorweidong jia2020-04-261-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | The current dw33d partition index has changed, this patch solves this problem. old partition layout dev: size erasesize name mtd0: 00040000 00010000 "u-boot" mtd1: 00010000 00010000 "u-boot-env" mtd2: 00fa0000 00010000 "oem-firmware" mtd3: 00010000 00010000 "art" mtd4: 00500000 00020000 "kernel" mtd5: 05b00000 00020000 "ubi" mtd6: 02000000 00020000 "oem-backup" new partition layout dev: size erasesize name mtd0: 00500000 00020000 "kernel" mtd1: 05b00000 00020000 "ubi" mtd2: 02000000 00020000 "oem-backup" mtd3: 00040000 00010000 "u-boot" mtd4: 00010000 00010000 "u-boot-env" mtd5: 00fa0000 00010000 "oem-firmware" mtd6: 00010000 00010000 "art" Signed-off-by: weidong jia <jwdsccd@gmail.com>
* uboot-envtools: update to 2020.04Lucian Cristian2020-04-261-7/+8
| | | | | | also revert to directly download the archive from https Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* uboot-rockchip: fix ident stringPetr Štetiar2020-04-201-1/+1
| | | | | | | | Commit 797506011695 ("uboot-rockchip: add new package") has added `OpenWRT` ident string, fix it to proper `OpenWrt`. Fixes: 797506011695 ("uboot-rockchip: add new package") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-rockchip: add new packageTobias Mädel2020-04-201-0/+57
| | | | | | | This package is needed for the rockchip target. Signed-off-by: Tobias Mädel <t.maedel@alfeld.de> Tested-by: Tobias Schramm <t.schramm@manjaro.org>
* arm-trusted-firmware-rockchip: add new packageTobias Mädel2020-04-201-0/+49
| | | | | | | | | This is needed to build the uboot-rockchip, needed for the rockchip target Signed-off-by: Tobias Mädel <t.maedel@alfeld.de> Tested-by: Tobias Schramm <t.schramm@manjaro.org> [replaced `mkdir -p` with INSTALL_DIR variable] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-kirkwood: update to 2020.04Pawel Dembicki2020-04-2010-118/+101
| | | | | | | | | | | | | Update U-Boot to current 2020.04 release for kirkwood platform. Catch up with upstream and move some configuration options from the header files to the corresponding defconfig files. Compile tested: all devices Run tested: nsa310, pogoplugv4 Tested-by: Cezary Jackiewicz <cezary@eko.one.pl> [nsa310] Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* rbcfg: Add missing mode to open callHauke Mehrtens2020-04-182-2/+2
| | | | | | | | | | | | | | | | | | | When open() is called with O_CREAT a 3. parameter has to be given with the file system permissions of the new file. Not giving this is an error, which results in a compile error with glibc. This fixes the following compile error with glibc: ---------------------------------------------------------------------- In file included from /include/fcntl.h:329, from main.c:18: In function 'open', inlined from 'rbcfg_update' at main.c:501:7: /include/bits/fcntl2.h:50:4: error: call to '__open_missing_mode' declared with attribute error: open with O_CREAT or O_TMPFILE in second argument needs 3 arguments __open_missing_mode (); ^~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: bump to 2020.04 relasePetr Štetiar2020-04-179-43/+14
| | | | | | | | | | | Refreshed patches, removed upstreamed patch: 260-configs-a64-olinuxino-emmc-add-eMMC-boot-part-config.patch Boot tested on a64-olinuxino-emmc. Cc: Zoltan HERPAI <wigyori@uid0.hu> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-imx6: bump to 2020.04 releasePetr Štetiar2020-04-174-13/+11
| | | | | | | | | Refreshed all patches, run tested on apalis. Cc: Vladimir Vid <vladimir.vid@sartura.hr> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* grub2: fix build when ASLR enabledKevin Darbyshire-Bryant2020-04-021-2/+3
| | | | | | | | | | | | | | Disable ASLR and filter '-fno-plt' from CFLAGS: solves building when ASLR enabled by basically disabling ASLR. Solves errors similar to: relocation R_X86_64_32S against `.rodata' can not be used when making a PIE object; recompile with -fPIE or module missing GLOBAL_OFFSET_TABLE Suggested-by: 李国 <uxgood.org@gmail.com> Acked-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* grub2: make some change to add efi platform support李国2020-03-311-23/+51
| | | | | | | | 1.generate boot image at Package/install section 2.move boot image to $(STAGING_DIR_IMAGE)/grub2/ 3.add efi variant to support efi platform Signed-off-by: 李国 <uxgood.org@gmail.com>
* uboot-sunxi: a64: allow booting directly from eMMCPetr Štetiar2020-03-281-3/+5
| | | | | | | | | Current boot script uses hardcoded bootdevice, which allows booting from SD card only, so this patch allows booting directly from eMMC as well. While at it, replace fixed root device with more flexible UUID based probing, so from now on probing order of MMC device doesn't matter. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-sunxi: add support for Olimex A64-Olinuxino eMMCPetr Štetiar2020-03-282-0/+38
| | | | | | | Adding U-Boot image for Olimex A64-Olinuxino eMMC, including patch which adds eMMC boot partition configuration commands. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-sunxi: add support for Olimex A64-OlinuxinoPetr Štetiar2020-03-281-0/+9
| | | | | | Adding U-Boot image for Olimex A64-Olinuxino. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-sunxi: rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3Petr Štetiar2020-03-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | Rename the board as done in upstream commit 268ae6548779 ("sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3") which backs the rename with the following reasoning: The brand Sinovoip is used for Sinovoip's original VOIP products, while the Bananapi brand is for the single board computers they produce. This has been verified by Bananapi. Rename the board from "Sinovoip BPI M2 Plus" to "Bananapi M2 Plus". For the defconfig file, all lowercase is used. To support the H5 variant of this board, the "H3" suffix is added to the defconfig name. This has to be done in order to allow building U-Boot past v2019.04 release where this change was introduced. Ref: https://github.com/openwrt/openwrt/pull/2849#discussion_r396401489 Suggested-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-sunxi: Banana Pi M2 Ultra switch to mainline defconfigAleksander Jan Bajkowski2020-03-282-27/+2
| | | | | | U-boot also have defconfig for this board. In 2019.01 branch they are identical. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* uboot-sunxi: bump to 2020.01Petr Štetiar2020-03-2813-103/+23
| | | | | | | | | Refreshed patches, removed following, probably obsolete patches: 221-compatible-old-dtc.patch 240-sun50i-h5-Orange-Pi-Zero-Plus-Fix-SdCard-detection.patch Signed-off-by: Petr Štetiar <ynezz@true.cz>
* x86/grub2: move grub2 image creation to packagePaul Spooren2020-03-212-0/+32
| | | | | | | | | | | Let the grub2 package take care of creating installable grub2 images, this will allow creating grub2 images without first calling x86 image generation recipe. Also as side effect, since those images are now shared, it'll reduce the number of calling grub-mkimage. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl> [rebase, adjusted commit title] Signed-off-by: Paul Spooren <mail@aparcar.org>
* x86: make crashdump worksChen Minqiang2020-03-203-1/+29
| | | | | | | | | | | | | | | 1. KERNEL_CRASH_DUMP should depends on KERNEL_PROC_KCORE (kexec use it) 2. select crashkernel mem size by totalmem mem <= 256M disable crashkernel by default mem >= 4G use 256M for crashkernel mem >= 8G use 512M for crashkernel default use 128M 3. set BOOT_IMAGE in kdump.init 4. resolve a "Unhandled rela relocation: R_X86_64_PLT32" error Tested on x86_64 Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* layerscape: ls1012afrdm: introduce dynamic partitioningTomasz Maciej Nowak2020-03-121-2/+2
| | | | | | | | | | | | Combine fixed sizes of "kernel" and "rootfs" partitions into one partition managed by OpenWrt splitter, it will allow better management of chip capacity and less maintenance burden when compiled kernel image will outgrow allocated size for kernel partition. This also changes kernel image format, since splitter only manages kernel and rootfs partitions, the dtb needs to be updated with the kernel, so for convenience, kernel is packed to FIT image. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* layerscape: ls1012afrdm: convert image to squashfsTomasz Maciej Nowak2020-03-121-1/+1
| | | | | | | This commit replaces UBIFS root partition with squashfs+overlay. It's preparation for introducing dynamic partitioning. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* layerscape: resurrect support for FRDM-LS1012ATomasz Maciej Nowak2020-03-123-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Re-add support for NXP FRDM-LS1012A, which mimics the flash layout of the rest boards supported by LSDK. 0x000000000000-0x000000100000 : "bl2" 0x000000100000-0x000000500000 : "fip" 0x000000500000-0x000000600000 : "u-boot-env" 0x000000600000-0x000000a00000 : "reserved-1" 0x000000a00000-0x000000d00000 : "pfe" 0x000000d00000-0x000000f00000 : "reserved-2" 0x000000f00000-0x000001000000 : "dtb" 0x000001000000-0x000002000000 : "kernel" 0x000002000000-0x000004000000 : "ubifs" Specification SoC: LS1012A single core 800MHz RAM: 512 MB DDR3 Flash: 64 MB QSPI NOR Ethernet: 2x 10/100/1000 Mbps Connectors: µUSB 3.0 OTG µUSB 2.0 (debugging & power input) 2x 3.5mm jack for microphone & headphone (SGTL5000) Arduino Shield expansion with I2C, SPI, UART, and GPIO JTAG LEDS: 3x (non-configurable) Buttons: 1x (reset, non-configurable) Be advised that erasing or writing 64MB flash takes some time to finish. Do not reset the board until all operations end with success, otherwise You'll need external tools to re-program the flash chip. Installation Follow the QSPI programing procedure for LS1012AFRWY board in target/linux/layerscape/README, point 3.3. Don't forget about updating U-Boot environment with MAC addresses of ethernet interfaces, variable 'ethaddr' for eth0 and 'eth1addr' for eth1. As the LSDK images do not support sysupgrade, nor do changes in this commit, it's planed in upcoming submissions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* uboot-mxs: bump to v2020.01Michael Heimpold2020-03-082-15/+13
| | | | | | | | Also update the U-Boot BSP patch for I2SE Duckbill devices. Run tested on I2SE Duckbill and Olimex OLinuXino Maxi boards. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* uboot-envtools: mxs: add support for olimex, imx23-olinuxinoMichael Heimpold2020-03-082-1/+4
| | | | | | Add ubootenv uci config for Olimex OLinuXino boards. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* uboot-imx6: bump to 2020.01 and refresh patchesPetr Štetiar2020-03-086-154/+65
| | | | | | | | | | | | | | | | | Update U-Boot to latest release, remove `100-wandboard-enable-fit.patch` as FIT support was added in commit 5b8585825128 ("wandboard: Add FIT image support"). Rework `110-mx6cuboxi-mmc-fallback.patch` into two patches as there was new config option `CONFIG_SPL_FORCE_MMC_BOOT` added upstream which should provide the same functionality as the previous patch hunk. Moving Apalis towards generic distro_bootcmd. Cc: Vladimir Vid <vladimir.vid@sartura.hr> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: add support for Devolo Magic 2 WIFIManuel Giganto2020-03-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch support Devolo Magic 2 WIFI, board devolo_dlan2-2400-ac. This device is a plc wifi AC2400 router/extender with 2 Ethernet ports, has a G.hn PLC and uses LCMP protocol from Home Grid Forum. Hardware: SoC: AR9344 CPU: 560 MHz Flash: 16 MiB (W25Q128JVSIQ) RAM: 128 MiB DDR2 Ethernet: 2xLAN 10/100/1000 PLC: 88LX5152 (MaxLinear G.hn) PLC Flash: W25Q32JVSSIQ PLC Uplink: 1Gbps MIMO PLC Link: RGMII 1Gbps (WAN) WiFi: Atheros AR9340 2.4GHz 802.11bgn Atheros AR9882-BR4A 5GHz 802.11ac Switch: QCA8337, Port0:CPU, Port2:PLC, Port3:LAN1, Port4:LAN2 Button: 3x Buttons (Reset, wifi and plc) LED: 3x Leds (wifi, plc white, plc red) GPIO Switch: 11-PLC Pairing (Active Low) 13-PLC Enable 21-WLAN power MACs Details verified with the stock firmware: Radio1: 2.4 GHz &wmac *:4c Art location: 0x1002 Radio0: 5.0 GHz &pcie *:4d Art location: 0x5006 Ethernet &ethernet *:4e = 2.4 GHz + 2 PLC uplink --- *:4f = 2.4 GHz + 3 Label MAC address is from PLC uplink OEM SSID: echo devolo-$(grep SerialNumber /dev/mtd1 | grep -o ...$) OEM WiFi password: grep DlanSecurityID /dev/mtd1|tr -d -|cut -d'=' -f 2 Recommendations: Configure and link your PLC with OEM firmware BEFORE you flash the device. PLC configuration/link should remain in different memory and should work straight forward after flashing. Restrictions: PLC link detection to trigger plc red led is not available. PLC G.hn chip is not compatible with open-plc-tools, it uses LCMP protocol with AES-128 and requires different software. Notes: Pairing should be possible with gpio switch. Default configuration will trigger wifi led with 2.4Ghz wifi traffic and plc white led with wan traffic. Flash instruction (TFTP): 1. Set PC to fixed ip address 192.168.0.100 2. Download the sysupgrade image and rename it to uploadfile 3. Start a tftp server with the image file in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Allow 1-2 minutes for the first boot. Signed-off-by: Manuel Giganto <mgigantoregistros@gmail.com>
* ath79: add support for DomyWifi DW33DWeiDong Jia2020-03-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit ports the device from ar71xx to the ath79 target and modifies the partition layout. 1. Firmware is installed to nand flash. 2. Modify the uboot-env parameter to boot from the nand flash. 3. The kernel size is extended to 5M. 4.nor flash retains the oem firmware. oem partition layout dev: size erasesize name mtd0: 00040000 00010000 "u-boot" mtd1: 00010000 00010000 "u-boot-env" mtd2: 00e30000 00010000 "rootfs" mtd3: 00170000 00010000 "kernel" mtd4: 00010000 00010000 "art" mtd5: 00f90000 00010000 "firmware" mtd6: 06000000 00020000 "rootfs_data" mtd7: 02000000 00020000 "backup" new partition layout dev: size erasesize name mtd0: 00040000 00010000 "u-boot" mtd1: 00010000 00010000 "u-boot-env" mtd2: 00fa0000 00010000 "oem-firmware" mtd3: 00010000 00010000 "art" mtd4: 00500000 00020000 "kernel" mtd5: 05b00000 00020000 "ubi" mtd6: 02000000 00020000 "oem-backup" MAC address overview: All mac addresses are stored in the art partition. eth0: 0x0 eth1: 0x6 ath9k: 0xc ath10k: 0x12 No valid addresses in 0x1002 and 0x5006. All addresses match the OEM firmware. Install from oem firmware. Enable ssh service: Connect to the router web, click professional, click system-startup, and add dropbear in the local startup input box. Click system-administration, delete ssh-key, and replace your ssh pub key. Restart the router. 1.Upload openwrt firmware to the device scp openwrt-snapshot-r11365-df60a0852c-ath79-nand-domywifi_dw33d-\ squashfs-factory.bin root@192.168.10.1:/tmp 2.modify uboot-env. ssh login to the device: fw_setenv bootcmd 'nboot 0x8050000 0;bootm || bootm 0x9fe80000' Run the fw_printenv command to check if the settings are correct. 3.Write openwrt firmware. ssh login to the device: mtd -r write /tmp/openwrt-snapshot-r11365-df60a0852c-ath79-nand-\ domywifi_dw33d-squashfs-factory.bin /dev/mtd6 The device will restart automatically and the openwrt firmware installation is complete. Restore oem firmware.just erase the kernel partition and the ubi partition. ssh login to the device: mtd erase /dev/mtd4 mtd -r erase /dev/mtd5 Reboot the device Signed-off-by: WeiDong Jia <jwdsccd@gmail.com> [alter flash instruction in commit message] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* x86: add bootloader upgrade on sysupgradeTomasz Maciej Nowak2020-03-011-0/+5
| | | | | | | | | | | | | | Currently bootloader always stays on the same version as when first written to boot medium (not true if partition layout changed, which will trigger sysupgrade process to write full disk image). That creates inconveniences as it always stays with same features or/and bugs. Users wishing to add support to additional modules or new version, would need to write the whole image, potentially destroying previous system configuration. To fix these, this commit adds additional routine to sysupgrade which upgrades unconditionally the bootloader to the latest state provided by OpenWrt. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* uboot-mvebu: point to UBOOT_CONFIG when setting optionsTomasz Maciej Nowak2020-03-011-4/+4
| | | | | | | | | The BUILD_VARIANT might differ from UBOOT_CONFIG, so point to a file we are actually changing. Being here let's call 'Build/Configure/U-Boot' definition, instead of definig the same command. This'll be more future proof, if U-Boot configuration procedure will change. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* packages/boot: bump arm-trusted-firmware-mvebu versionScott Roberts2020-02-221-4/+4
| | | | | | | The current version of ATF does not support power off for SGMII COMPHY. Update to latest ATF to resolve this issue. Signed-off-by: Scott Roberts <ttocsr@gmail.com>
* uboot-envtools: ath79: add Netgear WNDR3700v2Michal Cieslakiewicz2020-02-041-1/+2
| | | | | | | | Add Netgear WNDR3700v2 to the list of supported boards. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> [rebase, adjusted commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* rbcfg: make package available for ath79Roger Pueyo Centelles2020-01-231-1/+1
| | | | Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* uboot-envtools: ath79: add support for glinet,gl-ar150Kimmo Vuorinen2020-01-231-0/+3
| | | | | | | | Add ubootenv uci config for GL.inet GL-AR150 Signed-off-by: Kimmo Vuorinen <kimmo.vuorinen@gmail.com> [commit title/message facelift] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* uboot-envtools: ar71xx: add support for gl-ar150/-domino/-mifiKimmo Vuorinen2020-01-231-0/+5
| | | | | | | | Add ubootenv uci config for gl-ar150, gl-domino and gl-mifi Signed-off-by: Kimmo Vuorinen <kimmo.vuorinen@gmail.com> [commit message/title facelift] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* uboot-oxnas: fix memory leak in tool mkox820crcAndrea Dalla Costa2020-01-151-0/+3
| | | | | | | | In function `main` add calls to `free` for the variable `executable`. This is needed because the variable `executable` is allocated but never freed. This cause a memory leak. Signed-off-by: Andrea Dalla Costa <andrea@dallacosta.me>
* ath79: add support for Netgear WNDR4500 v3Michal Cieslakiewicz2020-01-151-0/+1
| | | | | | | | | | | | | | | | | | | This patch introduces support for Netgear WNDR4500v3. Router is very similar to WNDR4300v2 and is based on the same PCB. Information gathered from various Internet sources (including https://patchwork.ozlabs.org/patch/809227/) shows following differences to WNDR4300v2: * two USB 2.0 ports with separate LEDs * USB LEDs soldered to secondary pads * WPS and RFKILL buttons soldered to secondary pads * described as N900 device with 3x3:3 MIMO for 2.4GHz radio * power supply requirement is DC 12V 2.5A * vendor HW ID suffix differs in one digit * bigger chassis Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>