aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot
Commit message (Collapse)AuthorAgeFilesLines
* mvebu: add ClearFog Base supportMarko Ratkaj2017-05-141-1/+1
| | | | | | | | | | Add support for SolidRun ClearFog Base board. The base model is a smaller version of ClearFog Pro without the DSA switch, replacing it with a second copper gigabit port, and only one PCIe socket. Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
* mvebu: ClearFog renamed upstream to ClearFog ProMarko Ratkaj2017-05-141-1/+1
| | | | | | The conventional model is now known as the "Clearfog Pro" Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
* uboot-omap: rename patch to 101-disable-thumb-omap3.patchAlexander Couzens2017-04-301-0/+0
| | | | | | It's disabling thumb for the whole omap3 family. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* uboot-omap: enable thumb for overoAlexander Couzens2017-04-301-0/+18
| | | | | | | | Even it's unknown if it's booting with thumb, because the lack of hardware. Enable it for now, so the build succeed, because without thumb it can not fit into spl. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* package/uboot-omap: add am335x_boneblackAlexander Couzens2017-04-241-1/+6
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* package/uboot-omap: add default uEnv to boot via mmc cardAlexander Couzens2017-04-242-0/+10
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* package/uboot-omap: re-introduce patches dropped by update to v2017.01Alexander Couzens2017-04-243-0/+85
| | | | | | | The beagleboard doesn't boot with Thumb enabled, but without Thumb the SPL (first stage bootloader) is too big to fit into SRAM. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* package/uboot-omap: install image to STAGING_DIR_IMAGEAlexander Couzens2017-04-241-0/+5
| | | | | | to use them later by image/Makefile to create full working sdcard images Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* package/uboot-omap: assign BUILD_DEVICES most boardsAlexander Couzens2017-04-241-1/+3
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ramips: dont replace the board nameMathias Kresin2017-04-211-1/+2
| | | | | | | | | | Use fixed led names and add each board variant instead of manipulating the board name. It makes the ramips board name function less different to the one used in other targets and allows to merge them with a common function. Signed-off-by: Mathias Kresin <dev@kresin.me>
* grub2: update to 2.02~rc2Alif M. Ahmad2017-04-121-2/+2
| | | | | | Update to version 2.02~rc2. Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
* uboot-ar71xx: fix build errorFelix Fietkau2017-04-061-0/+2
| | | | | | The HOSTCFLAGS override only works on newer u-boot versions Signed-off-by: Felix Fietkau <nbd@nbd.name>
* u-boot.mk: pass HOSTCC and HOST_CFLAGS into the buildFelix Fietkau2017-04-041-0/+2
| | | | | | | Cuts build time on Mac OS X in half by avoiding repeated $(shell) calls from the build system Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-lantiq: fix build error on mac os xFelix Fietkau2017-04-041-0/+18
| | | | | | asm/* includes are not safe for the host build Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kexec-tools: get kexec running on MUSL and x86 hardwarePhilip Prindeville2017-04-032-0/+211
| | | | | | | Couple of important upstream patches (slated for 2.0.15) that are necessary for kexec to run on MUSL and on x86 hardware. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* package/boot/uboot-kirkwood: fix build errors for nsa310 and nsa325Paul Wassi2017-03-273-54/+14
| | | | | | | With upstream changes, the last update to U-Boot 2017.03 broke the nsa310 and nsa325 targets. Also fix some redefines. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* pistachio: remove custom board detection overrideFelix Fietkau2017-03-221-1/+1
| | | | | | Use device tree based model string Signed-off-by: Felix Fietkau <nbd@nbd.name>
* pistachio: remove pistachio_board_name, use the generic functionFelix Fietkau2017-03-221-2/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* target: add pistachioIan Pozella2017-03-222-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Pistachio target is a MIPS interaptiv based SoC developed by Imagination Technologies. It includes blocks for i2c, spi, audio, usb and WiFi. This also adds the base support for the 'Creator Ci40 (marduk)' device which uses the Pistachio SoC to create an IoT hub by including Bluetooth, WiFi and 6lowpan on one board. Additionally 2x Mikrobus ports are available to expand with further RF technologies or add sensors. You can find out more here http://creatordev.io. Note, this commit is just the initial board support hence the following are not expected to work yet: * WiFi * Bluetooth * 6lowpan * Audio * Mikrobus uarts, user leds (clock dependency of 6lowpan chip) The aim of this commit is to essentially have the same level of support that currently exists in the mainline kernel. Signed-off-by: Abhijit Mahajani <Abhijit.Mahajani@imgtec.com> Signed-off-by: Francois Berder <francois.berder@imgtec.com> Signed-off-by: Ian Pozella <Ian.Pozella@imgtec.com> Signed-off-by: Mayank Sirotiya <Mayank.Sirotiya@imgtec.com> Signed-off-by: Sean Kelly <Sean.Kelly@imgtec.com>
* lantiq: remove lantiq_board_name, use the generic function insteadFelix Fietkau2017-03-221-2/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-fritz4040: add an ipq806x u-boot for FritzBox 4040Felix Fietkau2017-03-224-0/+401
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* package/boot: update uboot-kirkwood to 2017.03Paul Wassi2017-03-209-29/+30
| | | | | | Bump uboot-kirkwood to upstream release 2017.03 Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* packge/boot/rbcfg: add new boot constants found in the recent Mikrotik devicesAlex Samorukov2017-02-262-0/+6
| | | | Signed-off-by: Alex Samorukov <samm@os2.kiev.ua>
* grub2: update to 2.02~rc1Alif M. Ahmad2017-02-261-2/+2
| | | | Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
* layerscape: add LS1043A Rev1.1 supportYangbo Lu2017-02-262-4/+4
| | | | | | | | Backport kernel patches for LS1043A Rev1.1 support from upstream, patchwork, and SDK. And update to latest u-boot to support LS1043A Rev1.1. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* uboot-omap: Makefile: Include kernel.mkAlexandru Gagniuc2017-02-231-0/+1
| | | | | | | | | | | This is needed for the definition of $(LINUX_DIR). This is used in u-boot.mk to change the device-tree compiler to the dtc used by linux. Without this, the build will use the system dtc. This results in a build failure when a dtc does not exist outside the buildroot. Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
* uboot-omap: Update to u-boot v2017.01Alexandru Gagniuc2017-02-204-57/+2
| | | | | | | | | | | | Specifying USE_PRIVATE_LIBGCC is no longer needed, as it is the default. Patch 001 is removed, since it was already merged upstream. Patches 100 and 101 are removed because they do not appear to be needed anymore, and they do not conform with the sign-off and commit message procedures. Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
* uboot-omap: Do not hide bootloader packagesAlexandru Gagniuc2017-02-201-1/+0
| | | | | | | | | | | | | Because they were hidden, there was no way to disable the uboot targets in menuconfig, so they had to be built every time. The omap target is the only one to hide uboot packages. To be consistent with the other targets, and have more control over the build, un-hide the u-boot packages. Note that the default behavior remains unchanged, as uboot will be built unless explicitly disabled. Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
* uboot-kirkwood: fix usb of nsa310b u-bootAlberto Bursi2017-02-141-1/+3
| | | | | | | fixes issue "nsa 310b u-boot can initialize usb but cannot use usb storage so it cannot load files from usb" Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* package/uboot-envtools: add OpenMesh A40 supportSven Eckelmann2017-02-141-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* package/uboot-envtools: add OpenMesh a60 supportSven Eckelmann2017-02-141-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* package/uboot-envtools: add OpenMesh OM2Pv4/-HSv4 supportSven Eckelmann2017-02-141-1/+3
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* uboot-kirkwood: add Zyxel NSA325 ubootAlberto Bursi2017-02-112-0/+714
| | | | | | add uboot for NSA325 Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* uboot-envtools: add nsa325 envsAlberto Bursi2017-02-111-0/+1
| | | | | | adding nsa325 envs for consistency with other kirkwoods Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* uboot-kirkwood: fix goflexhome/net bootcommandAlberto Bursi2017-02-091-1/+1
| | | | | | | | | | Goflexhome/net use uImage, and to boot an uImage the u-boot must use bootm command, not bootz. Fixes the "i cannot boot LEDE with this u-boot" issue that I found out myself with my goflexnet. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* uboot-kirkwood: remove obsolete patchesAlberto Bursi2017-02-096-142/+0
| | | | | | | | | | all patches for CONFIG_SYS_GENERIC_BOARD are obsolete for uboot 2016 sources. Run-tested with the uboot of goflexnet, also the md5sum of all other uboots is the same with or without these patches. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* ixp4xx: put apex images into image staging directoryJo-Philipp Wich2017-01-271-1/+2
| | | | | | | | | | | | Do not put the apex images into the kernel build directory as this directory might get removed after kernel updates while the apex packages InstallDev recipe is not getting re-executed because it is still considered current, leading to image build failures later on due to missing images. To ensure that built bootloader images persist over kernel version updates in the buildroot, put them into the new STAGING_DIR_IMAGE directory. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mxs: put u-boot images into image staging directoryJo-Philipp Wich2017-01-271-1/+2
| | | | | | | | | | | | Do not put the u-boot images into the kernel build directory as this directory might get removed after kernel updates while the u-boot packages InstallDev recipe is not getting re-executed because it is still considered current, leading to image build failures later on due to missing images. To ensure that built bootloader images persist over kernel version updates in the buildroot, put them into the new STAGING_DIR_IMAGE directory. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* oxnas: put u-boot images into image staging directoryJo-Philipp Wich2017-01-271-2/+2
| | | | | | | | | | | | Do not put the u-boot images into the kernel build directory as this directory might get removed after kernel updates while the u-boot packages InstallDev recipe is not getting re-executed because it is still considered current, leading to image build failures later on due to missing images. To ensure that built bootloader images persist over kernel version updates in the buildroot, put them into the new STAGING_DIR_IMAGE directory. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* sunxi: put u-boot images into image staging directoryJo-Philipp Wich2017-01-271-2/+3
| | | | | | | | | | | | Do not put the u-boot images into the kernel build directory as this directory might get removed after kernel updates while the u-boot packages InstallDev recipe is not getting re-executed because it is still considered current, leading to image build failures later on due to missing images. To ensure that built bootloader images persist over kernel version updates in the buildroot, put them into the new STAGING_DIR_IMAGE directory. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* layerscape: put u-boot and ucode images into image staging directoryJo-Philipp Wich2017-01-272-4/+6
| | | | | | | | | | | | Do not put the u-boot and ucode images into the kernel build directory as this directory might get removed after kernel updates while the u-boot packages InstallDev recipe is not getting re-executed because it is still considered current, leading to image build failures later on due to missing images. To ensure that built bootloader images persist over kernel version updates in the buildroot, put them into the new STAGING_DIR_IMAGE directory. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mvebu: put u-boot images into image staging directoryJo-Philipp Wich2017-01-271-2/+2
| | | | | | | | | | | | Do not put the u-boot images into the kernel build directory as this directory might get removed after kernel updates while the u-boot packages InstallDev recipe is not getting re-executed because it is still considered current, leading to image build failures later on due to missing u-boot images. To ensure that built bootloader images persist over kernel version updates in the buildroot, put them into the new STAGING_DIR_IMAGE directory. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uboot-lantiq: mark SPL variants as brokenMathias Kresin2017-01-251-0/+5
| | | | | | | | | | | | | | | | | All SPL variants are lzo compressed. The lzop binary is used for compression but is not available in tools. Additionally at least the NAND SPL support is broken and doesn't create working bootloaders. The fb3370 SPI NOR SPL enabled u-boot isn't required for LEDE since the LEDE images are targeting the pre-installed EVA bootloader. Mark these u-boot variants as well as the SPL variants for the reference boards as broken till the lzma issues are fixed upstream and we can use lzma instead of lzo compression. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: fix a tool portability issueFelix Fietkau2017-01-251-3/+3
| | | | | | Use the standard off_t type instead of loff_t Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mxs: fix image build issuesFelix Fietkau2017-01-251-3/+7
| | | | | | | stage u-boot images in KERNEL_BUILD_DIR for building images always select uboot-mxs Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-envtools: add nsa310b envsAlberto Bursi2017-01-241-0/+1
| | | | | | | accessing the u-boot's envs on this device is required to read the mac address. These are the envs of the new u-boot, not of the stock one. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* uboot-zynq: switch to u-boot.mkFelix Fietkau2017-01-241-98/+17
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-sunxi: clean up, switch to u-boot.mkFelix Fietkau2017-01-242-74/+107
| | | | | | | | Instead of referencing u-boot packages from device profiles and having a -all metapackage, make the u-boot packages hidden (they don't install to bin/ anyway), and name the files in KERNEL_BUILD_DIR appropriately Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-pxa: remove packageFelix Fietkau2017-01-242-104/+0
| | | | | | support for pxa has been gone for a long time now Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-oxnas: switch to u-boot.mkFelix Fietkau2017-01-2429-76/+10
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 10:55:22 +0000